Job Description

• Performing maintenance, repair and overhaul work on vehicles, equipment
• Perform major repair on engine and transmission
• Adhere to defined guidelines in regards to safety, orderliness
• Perform Store receiving, verification of goods receive/Issuing out and storing of goods.
• Perform Store administrative work
• Manage store room inventory
• Provide technical support when necessary.
• Perform basic repair, inspection, reassembly, refitting, and adjusting products as required.
• Maintain work area clean, safe, and orderly.
• To perform any other adhoc tasks assigned.

Working Hours:

• 5.5 days
• 8am - 5pm / 9am - 6pm

Requirement

• Relevant working experience highly welcomed
• Positive attitude, willingness to learn and good team player
• Candidate must possess at least Primary/Secondary School/"O" Level in Others or equivalent.
• At least 1 Year of working experience in the related field is required for this position.

Job Descriptions

• Attends and conducts daily toolbox briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Ensures sub-contractors carry out the work as planned.
• Evaluate project to identify issues and opportunities to improve performance
• Ensures good co-ordination and communication between stakeholders.
• Maintains System & Sub System Mark-up Drawings.
• Ensures to follow-up Overall Commissioning and Completion Documentation.
• Creates Punch List, Updating and closing in PIMS.
• Prepares & follow up for signing Mechanical Completion Dossier (MC), signing (By Client) System Completion Dossier (SCD).
• Coordinates and arranges Tri Party Walk down, Discipline Completion Walk down (DCC) & Mechanical Completion Walk down (MC Walk down).
• Follow ups of completion hand over certificates

Requirements

• Bachelor’s degree in mechanical engineering or related engineering disciplines, Diploma holders with relevant experience are welcomed to apply
• 5 years of relevant working experience in construction of offshore platform industry
• Knowledge in PIMS – Omega365 and ProCo System
• Able to read P&ID and Test Pack Limits.
• A pass in shipyard supervisor safety course
• Must be a team player & be able to work closely with other discipline supervisors
• Willing to work late hours and rotating day or night shifts

机电经理（M&E Manager）

Job responsibilities（工作职责）：

(1) Lead and oversee all M&E engineering activities in construction projects, ensuring adherence to design specifications, approved drawings, and project timelines.

(2) Manage the planning, scheduling, coordination, and integration of M&E systems installation and commissioning.

(3) Supervise M&E subcontractors and vendors, ensuring quality work, safety, and compliance with contractual obligations.

(4) Monitor and track the progress of M&E works, providing regular updates to senior management and stakeholders.

(5) Coordinate with architects, engineers, project managers, and other departments to resolve technical issues, discrepancies, and ensure seamless integration of M&E systems with other building components.

(6) Ensure compliance with regulatory standards, building codes, and quality assurance requirements (e.g., CONQUAS, QM).

(7) Liaise with clients, consultants, relevant authorities, and subcontractors regarding M&E issues, ensuring effective communication and problem resolution.

(8) Ensure M&E works comply with Safe Work Procedures and safety regulations throughout the installation and commissioning process.

(9) Prepare and submit M&E-related documentation, reports, and progress updates as required by the project schedule.

(10) Handle any other ad-hoc duties or tasks as assigned by management.

Requirements（要求）：

(1) Degree in Mechanical & Electrical Engineering or related fields; PE Board recognized degree is preferred.

(2) Minimum 8 years of relevant experience in the construction industry, with strong M&E project management expertise and at least one completed project cycle.

(3) Possess Green Mark Accredited Professional (GMAP) certification is a plus.

(4) Experience with MOHH or HDB projects is a plus.

(5) Proficient in Autodesk Revit, BIM software, or other M&E design tools.

(6) Strong leadership, organizational, and project management skills, with the ability to supervise teams and manage multiple tasks effectively.

(7) In-depth knowledge of M&E systems, installation methods, and industry standards.

(8) Good speaking and writing in both English and Chinese.

(9) With a actual experience of large-scale public building renovation and good relationship with the authorities will be preferred.

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition. Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging it sector expertise and global track record.

For more information, please visit www.sembcorp.com

Purpose and Scope

Manages the overall preparation of mechanical engineering designs, drawings, specifications, schedules, quantity and cost estimates for assigned projects.

Key Roles & Responsibilities

• Main Mechanical Lead for the checking and design of mechanical works from concept to detailed design for projects
• Conversant in local code and authority requirements, ensuring project compliance to the requirements.
• Able to perform analysis and guide engineers to analyze and provide technical advice and solutions when working with stakeholders
• Carry out project management, planning, financial management of project, contract administration, ensure key deadlines are met and team work together effectively
• Liaise with multiple stakeholders for civil & structure, architectural, mechanical and electrical works
• Preparation of tender documents and specifications
• Design management, coordination with contractors, subcontractors and external consultants
• Proactive communication, mentoring and guiding the reporting Engineers and Designers for learning and development
• Ensure the smooth completion of the project within schedule and budget
• Possibly assigned as Assistant Project Manager

Requirements

• Degree in Mechanical Engineering, or equivalent
• More than 6 years in the industry
• Experience in both construction management and design
• Conversant in Engineering analysis design software, BIM software, CFD simulations tools and other mechanical/fire engineering software.
• On track to qualify as a Registered Professional Engineer with PEB Singapore/ Specialized Professional Engineer
• Only Singaporean

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:
Instituition-first Mindset – Put the interest of the Group ahead of individual interests.
Collaboration – Deliver through collaborating across markets, businesses, and functions.
Accountability – Hold team and self-accountable to deliver on our commitments.

Job Description

• To be able read Hydraulic Circuit Drawings

• Experience in Heavy machinery related to hydraulics such as crane, winch & HPU tc..,

• Experience working in any Marine Vessel /Ships

• Has Knowledge in Instrumentation & Motor Control

Job Requirement

• ITE in Mechanical

• Able to write Service Report

• Able to follow the safety procedure

• Computer Literate

• Can work independently

• Willing to work overseas & accept offshore/onboard assignment

Job Benefits

• Positive and close knitted working environment

• Training Provided

• Onboard Allowances

• Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• Annual leaves starting with 14 days and up to 21 days

Working location:

15 Kwong Min Road

Singapore 628718

ABOUT SEMBCORP INDUSTRIES

Manages the overall preparation of mechanical engineering designs, drawings, specifications, schedules, quantity and cost estimates for assigned projects.

For more information, please visit www.sembcorp.com.

Purpose and Scope:

The Senior Principal Mechanical Engineer plays a pivotal role; the PE has to be engaged when submission to the relevant authorities are required, such as getting a development control approval, as well as various permits to start construction works in a project.

Responsibilities

• Responsible for the checking and design of mechanical works from concept to detailed design and provision of QP supervisory works for projects
• Endorsement of the authorities’ submissions, supervision & apply for certificate of completion as Professional Engineer (Mechanical) for the projects undertaken by company.
• Conversant in local code and authority requirements, ensuring project compliance to the requirements.
• Able to perform analysis and guide engineers to analyze and provide technical advice and solutions when working with stakeholders
• Carry out project management, planning, financial management of project, contract administration, ensure key deadlines are met and team work together effectively
• Liaise with multiple stakeholders for civil & structure, architectural, mechanical and electrical works
• Preparation of tender documents and specifications
• Design management, coordination with contractors, subcontractors and external consultants
• Proactive communication, mentoring and guiding the reporting Engineers and Designers for learning and development
• Ensure the smooth completion of the project within schedule and budget
• Perform any other duties as assigned

Requirements

• Minimum degree in Mechanical Engineering, or equivalent
• Registered Professional Engineer with PEB Singapore/ Specialized Professional Engineer or
• More than 10 years in the industry
• Experience in both construction management and design
• Conversant in Engineering analysis design software, BIM software, CFD simulations tools and other mechanical/fire engineering software.
• Only Singaporean

At Sembcorp, our shared corporate behaviour underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses and functions.

Accountability – Hold team and self accountable to deliver on our commitments.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Design and develop high-precision semiconductor equipment to meet the processing and automation needs of customers.
• Understand the design specification given to you by the design lead.
• Understand the company’s design standards and best practices.
• Understand the constraints within which your design must work.
• Understand geometric tolerances and dimensional analyses.
• Choose components based on an understanding of function, reliability, and costs.
• Choose materials based on an understanding of materials science and engineering.
• Understand design for manufacturability/assembly.
• Work with the Electrical Engineer to choose drives and electrical components (if any).
• Discuss with the Software Engineer on any interlocking logic requirements.
• Lay the design concept down in the 3D CAD.
• Perform DFMEA during the design process.
• Submit the CAD module to the system integrator to check for interface issues.
• Review the design with the design lead.
• Put the part designs down on drawings, carefully specifying tolerances and specifications.
• Build the module BOM.
• Procure the module components.
• Review the assembly of the physical module.
• Perform design improvements where appropriate.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Execute and complete scheduled operations and maintenance (O&M) tasks, along with ad-hoc maintenance activities, within set timelines and with the highest quality standards.
• Conduct routine inspections and checks of each equipment and process unit, accurately filling out and submitting checklists to the supervisor without delay.
• Perform scheduled preventive and predictive maintenance tasks, submitting maintenance records and checklists promptly to the supervisor.
• Address equipment breakdowns with corrective maintenance, ensuring all checklists and records are submitted to the supervisor.
• Report any equipment abnormalities or failures to the supervisor and assist in implementing rectification plans.
• Support operations activities as needed.
• Perform initial troubleshooting for equipment issues and report findings to the supervisor; assist in more advanced troubleshooting when required.
• Supervise maintenance contractors to ensure work is completed to standard.
• Promptly alert the supervisor to any unusual occurrences or potential damages.
• Maintain a safe and clean working environment by adhering to Environmental Health and Safety (EHS) procedures, rules, and regulations.
• Manage equipment, parts, and supplies inventories by monitoring stock levels and anticipating the need for spare parts.
• Undertake other tasks as assigned by the supervisor.

Requirements

• Diploma in engineering or Higher Nitec (mechanical, electrical, or industrial)
• Minimum of 3 years’ experience in facilities engineering or similar
• Strong communication skills with a positive mindset, hardworking, and capable of multi-tasking effectively.
• Customer Service oriented mindset
• Knowledge of fire alarm systems.
• Understanding of building regulations and health and safety.
• Excellent communication skills, including the ability to work well with non-engineering colleagues.
• Problem-solving skills and the ability to troubleshoot on the spot.

Responsibilities:

• To keep track of all tender documents, drawings and corrigendum base on the document control process
• To verify tender drawings/details and prepare tender enquiry
• To assist in quotations, selection of qualified subcontractors/vendors and distribution of relevant tender documents
• Perform quantity take-off for tender projects based on timeline
• Assist with tender evaluation and preparation of tender documents for submission
• Ensure all documentary evidences and contemporary records are documented, filed and complied for substantiation purposes
• Able to read M&E drawings
• Site verifications of variations and taking records for submissions of claims
• Assist project manager/designated staff to evaluate and certify completed work
• Assist in verifying sub-contractor’s claims
• Monitor and report on balance amount

Requirements:

• Candidate must possess at least a Diploma/Advanced/higher/Graduate Diploma in Quantity Survey or Mechanical Engineering or equivalent
• Minimum 3 years QS experiences
• Knowledge & experience in M&E system requirements
• Able to work under pressure and meet tight deadline
• Able to work independently with minimum supervision
• Good knowledge and skill set in Microsoft Office
• Fast learner and willingness to explore new skill sets/technologies

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

1. Plan, Organise and Manage activities and feedback crucial matters from projects.
2. Carry out engineering design/drawings related to their disciplines.
3. Review design and drawings prepared by subordinates.
4. Review and understand drawings submitted by contractors or Vendors.
5. Provide Technical support to non operations department.

Requirements:

1. A Recognized engineering degree with atleast 2 years work experience.
2. Posses good interpersonal and communication skill.
3. Proficient in MS office suite, AUTOCAD and related industrial software applications.
4. Good analytical & Problem solving.

Mechanical Engineering Manager

Description

• Lead, coach and develop the engineering team
• Provide technical guidance and support in TCP/IP, USB, BLE, Modem, Wi-Fi and Serial communications experience and developed low powered embedded systems
• Good at Tolerance Analysis/FACA for camera module, Wi-Fi, Zigbee, and Bluetooth
• Hands-on skills of TCP/IP, USB, BLE, Modem, Wi-Fi and Serial communications experience and developed low powered embedded systems
• Continuously evaluate and improve engineering processes and workflows.
• Implement best practices, advanced manufacturing techniques and methodologies. Stay updated with the latest technologies and industry trends.
• Ensure compliance with medical device industry standards and regulations.
• Coordinate with other departments to align project goals and requirements.
• Manage resources and prioritizing tasks to meet project deadlines.
• Communicate effectively with stakeholders, clients, and team members.

Education

• Bachelor’s degree in mechanical engineering or equivalent.

Experience

• Minimum 10 years’ of relevant working experience out of which 5 years should be in a lead or Manager’s role.
• Good knowledge in milling tooling and machining process.
• Experienced in R&D experience is a must

Skills

• Strong experience working with machine vision, 2D/3D camera module, embedded Linux drivers, kernel builds, etc
• In-depth experience in Linux and embedded firmware development especially in networking, Wi-Fi / Zigbee / Bluetooth / KNX RF wireless, IoT or LED Lighting products
• 5+ years of experience working with machine vision, 2D/3D camera module, embedded Linux drivers, kernel builds, etc
• Leadership skill.
• Project Management skills.
• Listening and Communication skills.
• Problem-solving and decision-making skills.

Responsibilities:

• Plan, coordinate, and supervise the maintenance of mechanical and electrical (M&E) systems, ensuring safe and efficient operations.
• Lead and guide technical officers and technicians in performing M&E maintenance tasks.
• Schedule and oversee preventive and corrective maintenance for systems such as lifts and escalators, fire protection and alarm systems, auto-doors, anti-terrorist vehicle barriers (ATVB), pumps, and mechanical piping, plumbing, and drainage systems.
• Quickly troubleshoot and resolve faults to minimize operational disruptions.
• Investigate breakdowns, identify root causes, and recommend effective solutions.
• Conduct regular inspections and ensure maintenance programs comply with safety and statutory standards.
• Analyse equipment performance, identify issues and implement improvements.
• Maintain accurate records of maintenance activities, work orders, and equipment history.
• Prepare detailed incident and technical reports.
• Achieve effective, economical, and safe operations of all Electrical Services' equipment and systems by the team of technical officers and technicians.
• Conduct regular inspections of existing Electrical installations to ensure that all maintenance programs are implemented effectively and in strict compliance with instructions and guidelines.
• Develop work schedules and rosters for technical staff to ensure adequate coverage.
• Train and mentor team members to enhance technical skills and knowledge.
• Collaborate with contractors, consultants, and clients to address and resolve technical issues.
• Build and maintain strong client relationships while delivering high-quality work.
• Ensure all tasks comply with safety procedures, company policies, and regulations.
• Support ad-hoc projects and assist with rectification works as required.

Requirements

1. Minimum Diploma or Degree in Mechanical/ Electrical Engineering or its equivalent.
2. M&E Facilities Management or related M&E fields or FM operations background with at least 3-5 years of Singapore relevant experience will be an added advantage
3. Strong communication skills with a positive mindset, hardworking, and capable of multi-tasking effectively.
4. Customer Service oriented mindset
5. Experience managing and leading a team of technicians
6. 5-day work week.
7. Location: Changi Airport

Job Description:

• Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineers are expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

Qualifications:

• Degree holder with min. 5 years’ experience or Diploma holders with 8 years’ experience in design and implementation.
• Able to multi-task and work in a fast paced environment
• Possess initiative, drive and ability to work independently
• Good interpersonal/communicational skills
• 4.5 days’ work week
• Experience in construction industry would be an added advantage

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Daniel Lim

Registration Number: R24124455

AlwaysHired Pte Ltd

EA Licence No: 24C2293

JOB HIGHLIGHTS

· Machine design in Mechanical aspect, Jig and Fixture, Equipment and development

· Provide Conceptual, mechanical part detailing and cost estimation

· BOM & machine manual writing

· Handle customers’ enquiries and issues

· Conduct machine acceptance with customer

· Co-ordination with sub-contractors for machine build

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

REQUIREMENT

· Posses strong leadership quality and be self-motivated

· Experience in Solidwork 3D software to do mechanical design

· Good knowledge and experience in machine automation

· Able to work independently and within schedule

Company Write Up:

Durapower is 15 years in operations and is company identified by Enterprise Singapore to scale up for growth as well. We have projects in Netherlands, Singapore, Thailand and Southeast Asia regions, production is in China as a manufacturing plant. There is no manufacturing here, but we have R&D team here liaising with China as well to execute trade of cells, battery modular systems packs enabling green industry applications. Our expansion is also enhanced by the stakes and investment in us through Banpu Next (Banpu Group) which is listed on the Thailand Stock Exchange.

You may refer to the news here: https://en.prnasia.com/releases/apac/durapower-to-advance-global-expansion-plan-after-us-70-million-investment-from-banpu-next-394762.shtml

Video by Management on Durapower:

https://www.linkedin.com/posts/activity-6945009405591465984-ew1t?utm_source=linkedin_share&utm_medium=member_desktop_web

This position will be supported by Enterprise Singapore on the Singapore Global Executive Programme (Companies) (enterprisesg.gov.sg).

You may read up on Durapower's Management Associate Programme - Durapower-management-associate-programme – Durapower Group.

Job Description: Mechanical Engineer (ESG-SGEP)

The specialization of this job role will enable mechanical & structural design initiatives.

Responsibilities

· Serve as local design lead for customized design and pre-sales proposal, platform design, design-changes, trials, and root-cause analysis.

· Own mechanical and structural analysis using CAE tools.

· Own basic on-site component and system level testing to support design and specification changes, coordinate validation testing for changes with global team.

· Organize Root-Cause & Corrective Analysis for design issues

· Collaborate directly with Manufacturing, Process, and Quality to solve yield barriers and scrap issues

Requirements

· Degree with less than 3 years of experience in Mechanical Engineering

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure timely completion of an assign tender

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Abie to work under a tight timeline
• Must be a team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Industry: Manufacturing/ Production

Location: West

Working Hours: Monday Friday, 8:30am 5.45pm

Basic + Allowance + AWS + VB

Job Responsibilities:

• Responsible for 3D product design and its requirements
• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions
• Create proof of concepts
• Generate engineering drawing with proper GD&T and Tolerance Stack up
• Define test requirements needed for all the designed products
• Perform Patent search for possible design infringement
• Drive Projects with tight timeline
• Any other duties as and when assigned
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Bachelor Degree in Mechanical / Industrial
• 1-2 years of relevant experience
• Good exposure in Plastic Injection molded parts design
• Knowledge of product design, engineering plastics behavior, product certification
• Knowledge of CAE simulation will be an added advantage
• Competent in Engineering calculations
• Hands on 3D CAD & CAE experience
• Good problem-solving skills with strong technical acumen

Please email your updated CV in Words format to [email protected]

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

We regret that only shortlisted candidates will be notified

EA Personnel: Lim Jing Yee, Lena

EA Registration No.: R1872533

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building, Singapore 049705

EA Licence Number: 02C4944

Tel: 6950 9755

JOBID: L345WWYW

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600, after 3 months $2700

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Requirements:

• Min Diploma in Mechanical Engineering or relevant discipline
• Advanced skills using company software
• Proven ability to communicate well in written and verbal communications
• Design thinking for product inventions and enhancements
• Motivation and commitment to providing interpersonal customer service
• Knowing and applying current industry standards and information
• Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

Recruit Now Pte Ltd

EA License No: 21C0845

Key Duties:

• Develop and design mechanical systems (HVAC, plumbing, fire protection) in 3D using BIM software (Revit, AutoCAD, etc.).
• Prepare detailed mechanical design models, drawings, and specifications for commercial, residential, and industrial projects.
• Participate in design coordination meetings with architects, MEP engineers, and contractors to resolve clashes and ensure efficient project execution.
• Utilize BIM coordination tools like Navisworks to detect clashes and implement clash resolution processes for mechanical systems.
• Produce and maintain detailed documentation, including BIM execution plans, as-built drawings, and equipment schedules.
• Perform quality control checks on mechanical systems designs and ensure accurate implementation of BIM models in the construction phases.

Requirements:

• Min Bachelor Degree in Mechanical Engineering relevant discipline
• Min 2 Years of working experience
• BIM Certified will be highly advantageous

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

Recruit Now Pte Ltd

EA License No: 21C0845

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: North
• Working days: Monday to Friday
• Working hours: 8am – 5pm

Job Responsibilities:

• Install, set up, and commission fluid systems at client sites
• Ensure all installations meet safety standards, technical specifications, and operational requirements
• Perform troubleshooting on mechanical, electrical, and control systems associated with fluid systems
• Conduct repairs on malfunctioning or damaged fluid system components
• Recommend and implement upgrades or modifications to improve system efficiency, reliability, and performance
• Provide technical support to customers, including guidance on system operation, maintenance, and best practices
• Conduct on-site training for clients on fluid system maintenance and safety procedures
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s degree in Instrument / Mechanical engineering or strong science/technical discipline with at least 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Roles & Responsibilities

• To plan and execute corrective/preventive maintenance on facility equipment and production equipment to ensure good efficiency and availability.
• Implement TPM program in HPSL such as autonomous maintenance and critical spare part management.
• Engage external equipment vendor for service contract and ad hoc diagnostic or corrective maintenance activities.
• Support safety and EHS related activities and audits.

Description of Responsibilities and Duties

• Plan and execute corrective/preventive maintenance on facility equipment and plant equipment to ensure good efficiency and availability. Generate equipment and facilities related records/reports/ documentations on above activities.
• Implement TPM strategy. Responsible for tracking machinery spare parts usage, maintaining adequate quantity, critical parts requirement, spare parts management, continuous improvement, and ISO audits.
• Support EHSS related topics, ensure site is in full compliance with Environment, Health and Safety (EHS) and Security regulation and policy.
• Resolve various equipment performance issues internally before approaching equipment vendor. Review equipment log and technician feedback for quick solutions.
• Liaise and co-ordinate jobs to be performed by contractors for facilities and plant equipment. Ensure work completion and achieve high standard of work.
• Perform site EHSS inspection/audits and ensure that all corrective/ preventive actions are close in timely manner. Responsible for internal/external audits and EHSS activities.
• Interpret electrical diagrams and mechanical drawings for equipment troubleshooting with at least 3 years hand-on experience
• Evaluate existing/new contractors’ performance and negotiate with them on quotations and service level.

Requirements:

• Hands on experience in mixer and milling equipment maintenance is an advantage.
• Knowledge in TMP, Equipment FMEA is an advantage.
• Knowledge in facilities maintenance (Electrical, water, AC) is an advantage.
• EHS competence, familiar with ISO45001 & ISO14000 is a plus.
• Able to read electrical, hydraulic, pneumatic and mechanical diagrams and carried out maintenance work accordingly.
• Lead and guide technicians on above work.
• Operational hands-on experience
• Safety conscious

Education:

• Degree/Diploma in Mechanical Engineering or equivalent
• Minimum 5 years of relevant working experiences
• Experience in chemical and mechanical process