Job Responsibilities:

· Design and implementation of mixed signal CMOS IP. Development cycle including circuit design, simulation, modeling, verification and bench characterization.

· Management products utilizing leading edge sub-micron CMOS technologies, e.g., 5/6nm

· Developing state of the art high speed mixed signal IP products that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, DC-DC converters, and high bit-rate (Gbps) Serdes TX/RX.

Requirements:

· Bachelor or above degree in Microelectronic or Electronic and Information Engineering

· 5 years or above experience in the area of analog design

· Good knowledge in analog IC design in high speed Serdes, e.g., PLL, CDR, CTLE/DFE, TX driver etc.

• Solid understanding and experience in key analog layout considerations such as device matching, parasitic, noise coupling, floor planning, sensitive signal routing, current density and reliability considerations
• Familiar with SPICE simulation tool (e.g., Cadence spectre, Synopsys Custom Compiler, Calibre)

· Strong Communication skills, high level of independence, self-motivation and good team player

Job Description & Requirements

• Undertake construction supervision as RE of underground building works and civil infrastructure, involving site inspection, meetings and review of drawings and method statements in accordance to customer specifications, applicable codes, standards and other generally accepted practices
• Carry out independent design checks for temporary formwork and formwork support system
• Keep quality records of all works, monitor and report on work progress
• Review and comment on contractor's submissions
• To review and supervise safety, environmental and health matters
• Station full-time on site to support Senior Resident Engineers (SRE) and the QP(S) with projects

Requirements:

• Experience in Underground work/ viaduct work
• Minimum Diploma in Civil and/or Structural Engineering from an established institution and/or qualification accredited by JAC of IES/ACES as QSS
• Minimum 3 years of relevant experience as RE for LTA project (MRT, underground, tunnelling works) or PUB project
• Has good working knowledge of Geotechnical and instrumentation works and compliance to Singapore Building Regulations
• Good analytical ability with strong verbal and written communication skills
• Independent, organized with positive work attitude

Working Location:

• LTA / PUB projects

As an Electrical and Electronic Engineer, you will be responsible for designing, developing, testing, and maintaining electrical systems and electronic equipment. This includes working on components such as circuits, microprocessors, sensors, power generation and distribution systems, and control systems, applying your technical expertise to meet the needs of clients, manufacturers, or specific industries.

Key Responsibilities:

• Designing electrical circuits and systems.
• Creating schematics and layouts.
• Selecting appropriate components and materials.
• Conducting electrical tests and simulations.
• Ensuring designs comply with regulatory standards.
• Collaborating with other engineers to integrate electrical and electronics systems into products.
• Troubleshooting and resolving design issues.
• Preparing technical documentation and reports.
• Managing and maintaining design files and databases.
• Staying current with advancements in electrical and electronics engineering and technology.
• Performing any other tasks assigned.

Key Skills & Qualifications:

Education: Bachelor's degree in Electrical Engineering, Electronic Engineering, Mechatronics, or a related field. A Master's degree or higher is often preferred for senior roles.

Technical Skills:

• Proficiency with electrical engineering software (e.g., AutoCAD, MATLAB, LabVIEW, PSpice, etc.).
• Solid understanding of circuit design, PCB layout, and embedded systems.
• Experience with power electronics, automation, and control systems.
• Familiarity with microprocessors, sensors, IoT devices, and communication protocols (e.g., Bluetooth, Wi-Fi, SPI, I2C).
• Understanding of signal processing, analog and digital electronics.
• Problem-Solving & Analytical Skills:Strong troubleshooting and analytical skills to identify and resolve complex electrical and electronic issues.
• Soft Skills:Excellent communication skills for documentation and reporting, as well as client interaction.
• Ability to work collaboratively in team environments, especially in cross-disciplinary teams.
• Strong time management and organizational skills

Undertake construction supervision as RE of underground building works and civil infrastructure, involving site inspection, meetings and review of drawings and method statements in accordance to customer specifications, applicable codes, standards and other generally accepted practices

Carry out independent design checks for temporary formwork and formwork support system

Keep quality records of all works, monitor and report on work progress

Review and comment on contractor's submissions

To review and supervise safety, environmental and health matters

Station full-time on site to support Senior Resident Engineers (SRE) and the QP(S) with projects

Requirements:

Experience in Underground work/ viaduct work

Minimum Diploma in Civil and/or Structural Engineering from an established institution and/or qualification accredited by JAC of IES/ACES as QSS

Minimum 3 years of relevant experience as RE for LTA project (MRT, underground, tunnelling works) or PUB project

Has good working knowledge of Geotechnical and instrumentation works and compliance to Singapore Building Regulations

Good analytical ability with strong verbal and written communication skills

Independent, organized with positive work attitude

Company:

Sopra Steria is a listed European tech leader specializes in Consulting, Digital Service, and Software. We have 60,000 employees worldwide located in different regions (Europe, North America and Asia), whereby Singapore is the HQ for APAC. EvaGroup Asia Pacific is part of Sopra Steria I2S APAC, in charge of Infrastructure, Cloud and Cybersecurity services.

Responsibilities:

Managing and Operating Red Hat Platform Operations Day 2:

• Red Hat Enterprise Linux
• Red Hat Identity Management
• Red Hat Satellite
• Red Hat Ansible Automation Platform
• Installation/Configuration/Hardening/Maintenance/Patching
• Maintain System Security
• Advanced Troubleshooting
• Performance Tuning
• Capacity Management
• Preventive/Proactive Support
• Incident/Change/Problem Management

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Minimum 3 years of hands-on experience with Red Hat Enterprise Linux administration.
• Familiarity with security tools and protocols in a Linux environment.

Preferred Qualifications:
Red Hat Certified Engineer (RHCE) or Red Hat Certified System Administrator (RHCSA).

Job Description:

• Monitoring, supporting, and ensuring maintenance and documentation of the MES model in terms of products, routes, operations, equipment, recipes, and lot movements
• Ensure the smooth operation of the MES software and its integration with other systems such as ERP systems
• Identifying opportunities for process improvement and optimisation within the manufacturing environment through the analysis of MES data and collaboration with cross-functional teams
• Participating in MES-related projects, including project planning, resource allocation, and progress tracking, to ensure successful project delivery within scope, budget, and timeline constraints
• Assist in the planning, implementation and administration of M365 services such as MS Power Automate, PowerBI, SharePoint Online, Teams, Intune, OneDrive and other components
• Support in the conception and implementation up to the introduction of the projects in all phases for a sustainable operation, including Cloud projects
• Further development of our Digital Workplace vision
• Any ad hoc duties assigned by supervisor/manager

Job Requirements:

• Bachelor/Diploma in IT with extensive hands-on experience in the area Automation and MES implementation
• Minimum 3 years hands on with MES software platforms implementation and support
• Proficiency in system integration in term of machine-to-machine and to application such as ERP
• Experience in delivering solutions for OEE, Energy Consumption, Traceability

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

JOB DESCRIPTIONS:

● Project management involving M&E Sanitary & Plumbing.

● Documentation of method statement and work procedures.

● Review and monitor site construction activities to ensure work completion as scheduled.

● Evaluation, cost estimation & analysis for M&E Sanitary & Plumbing.

● Preparation of design construction drawings.

● Liaison with all parties involved in the project including Local Authorities, Consultants, Architects, Main Contractors, Sub-Contractors & Suppliers.

● Attend site meetings and inspections.

● Any other business related matters assigned by the Management/Head office.

REQUIREMENTS:

● Degree / Diploma in Mechanical or Engineering or equivalent.

● Working experiences in similar position preferred.

● Excellent interpersonal communication skill, innovation and result oriented.

● Ability to work independently in a challenging environment.

● Immediate starter or short notice will be an advantage.

Please apply via MyCareerFuture or email your updated CV to [email protected].

Job Responsibilities:

•Lots handling, WAT analysis and process optimization

•Device development, Yield trouble shooting and reliability improvement

•Fab transfer & Customers handling

•Customized structure process integration development

• To be responsible for helping to drive leading edge process/device development and optimization of devices in order to meet scaling, performance, reliability, and manufacturability requirements.

• Identify and solve IC process and device problems

Job Qualification

•Bachelor degree or above in Materials Science, Electrical Engineering, Chemical Engineering, Mechanical Engineering, Physics, Chemistry or a related engineer discipline.

• 5+ Years Experienced Process Engineering

• Fab 12" knowledge is preferred

• Knowledge of Statistical Process Control (SPC) and/or Design of Experiments (DOE) principles

•Good communication skills, be able to work within cross-functional teams, including internal and external partners

Key Responsibilities:

Design & Development:

Assist in designing, developing, and testing electronic circuits and systems.

Support PCB (Printed Circuit Board) design, layout, and testing.

Assist in developing prototypes and performing hardware debugging and troubleshooting.

Software Development & Embedded Systems:

Collaborate on developing embedded software for microprocessors and other embedded systems.

Assist in the integration of hardware and software components for electronic systems.

Support programming tasks using C, C++, or Python in embedded environments.

Testing & Evaluation:

Assist with hardware and software testing, verification, and validation of electronic devices.

Document test results and work with engineers to identify areas for improvement.

Research & Development:

Contribute to the research of new technologies and innovations in electronics and computer engineering.

Support the team in evaluating new components, tools, and methodologies.

Collaboration & Reporting:

Collaborate closely with engineers, software developers, and product teams to meet project requirements and deadlines.

Prepare technical documentation and reports for internal review.

Qualifications:

Currently pursuing a Diploma or Bachelor’s or degree in Electronic Engineering, Computer Engineering, Electrical Engineering, or related field.

Strong knowledge of electronic circuit design, digital systems, and embedded systems.

Proficiency in programming languages such as C, C++, and Python.

Basic understanding of microprocessors, and FPGA-based systems is a plus.

Ability to work independently as well as collaboratively in a fast-paced environment.

Strong problem-solving skills, attention to detail, and excellent communication skills.

Preferred Skills & Experience:

Experience with hardware/software co-design and integration.

Familiarity with debugging tools such as oscilloscopes, logic analyzers, and multi-meters.

Knowledge of wireless communication protocols (e.g., Bluetooth, Wi-Fi, Zigbee).

Understanding of machine learning and AI applications in embedded systems (a plus).

What We Offer:

Mentorship from experienced engineers.

Opportunity to work on impactful, real-world projects.

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Civil & Structural Engineer

Visit www.ourengineers.com

Civil and structure design, analysis and impact assessement.
Plan, design, supervise and coordinate for civil engineering and infrastructural design and site works.
Ensure all engineering works comply with all relevant statutory standards regulations and codes of practice.
Liaision with project stakeholders, clients, other consultants, contractors and relevant authorities.
Assist Team Leader in maintaining high-quality standards of design ad supervision.

Job Requirements

Bachelor of Engineering major/interested in civil engineering.
Minimum 1 year of design experience in civil engineering projects in consulting firm.
Those with more than 5 years of design experience can be considered for senior post with higher renumeration.
Familiar with authorities' submission requirements for civil/infrastructure engineering projects.
Familiar with ground improvements works, civil and structural designs and BIM will be an added advantage

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities:

• Install, configure, troubleshoot and support servers or virtual machines (Hyper-V / VMware) running on Windows Server operating systems.
• Perform system maintenance, upgrade, patches and incident resolution outside of working hours when required.
• Monitoring and implementing backup solutions for critical systems and data regularly.
• Implement and maintain IT security measures and best practices for systems and address security incidents with latest security trends.
• Assist in the planning and implementation of IT projects, ranging from system upgrades to new system deployments.
• Create and update technical documentation pertaining to systems administration for on-premise systems, Azure and Microsoft 365.
• Any related ad-hoc duties as assigned.

Requirement:

• Minimum 3 years of experience as a System Engineer or Server Administrator.
• Experience with Active Directory, Group Policy, Virtualization, Patch Management, Microsoft Entra and Microsoft 365.
• Experience in cloud platforms such as Azure and AWS.
• Possess excellent communication, problem-solving and analytical skills.
• Ability to work independently.

The New Product Introduction (NPI) process engineer will provide Dermcut Medical Pte Ltd with technical support and operating knowledge for our medical device operation. This role will conduct critical engineering functions such as product validation, troubleshooting, identifying and implementing process improvements.

The engineer will work closely with project manager and is in charge of taking the prototype from pilot scale into full scale manufacturing in support of commercial efforts. This position will focus on developing various processes and implementing those to support mass production.

Primary Responsibilities

• Establish processes based on product specifications.
• Develop control plans, gage repeatability & reproducibility, test method verification & validation, and pFMEA.
• Identify areas of process improvement to reduce and minimize process related nonconformance incidents and to maximize efficiency of the process.
• Co-ordinate the generation of dossier including but not limited to design files, technical files and project files to include design outputs, shelf-life studies, biocompatibility, sterilisation, risk analysis, validation master plans, IQ's, OQ's, PQ's and test regimes.
• Responsible for screening and optimization of process parameters to achieve robust and stable processes and maximize yields, efficiencies and process capabilities.
• Perform other related duties and responsibilities as assigned.

Education / Experience Requirements

• Bachelor’s degree in process engineering or similar qualification.
• A minimum of 2 years’ experience in the medical device industry.
• A strong understanding of validation strategy (IQ/OQ/PQ), support protocols and reports.
• Experience in root cause analysis of technical discrepancies/abnormalities.
• Familiar with FDA documentation requirements, ISO 13485 quality management system, lean manufacturing, and good manufacturing practice.
• Experience with SolidWorks and Microsoft Project preferred.

Job Description & Requirements

Responsibilities

• Coordination of Mechanical,Electrical, P&S design and installation.
• Ensure all works are carry out accordingly to drawings, specification, and compliance to authorities’ requirements.
• Site coordination and manage M&E personnel on work progress, drawings,material, samples, method statement submission and approval, to ensure quality and timely completion.
• Manage and Coordinate SWC.
• Preparation of CSD & SEM or CCSM drawings.
• Monitoring of construction installation, field coordination and provide necessary problem solving.
• Carry out testing requirement, inspection with consultants.
• Conduct T&C and Handover to Client.
• Proper documentation of all test report, equipment records and As-built drawings.
• Supervision of workers and sub-contractor to ensure safety and compliance of work on site.
• Adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship.
• Other duties as assigned.

Requirements

• Minimum 5 years of engineering experience with Recognized Degree in relevant field.
• Minimum 3 years of supervision experience of E&M work in construction site for projects of similar scale and complexity.

Responsibilities:

• Responsible for providing technical expertise and leadership in the development, support, and management of the system.
• This includes developing new applications and supporting existing applications.
• Applying software engineering principles to analyze and problem-solve, and design a solution
• Developing and executing project plans
• Lead and/or guide junior software developers
• Creating functional and technical specifications
• Designing and developing test cases
• Adopting Agile methodologies to develop software
• Analyzing existing systems to provide recommendations for improvement
• Ensuring proper documentation
• Monitoring system performance and performing predictive maintenance
• Performing system risk and reliability analysis
• Assessing new technologies before adoption and implementation

Requirements:

• Minimal Bachelor of Bachelor or above degree in Computer Science, Information Technology, or similar preferred.
• At least 5-7 years of experience in system development and support.
  Strong technical skills in Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI, DevOps and GitHub.
• Excellent analytical and problem-solving abilities.
• Strong communication and interpersonal skills.
• Ability to manage multiple projects and deliverables simultaneously.
• Develop and support systems using Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI.
• Provide technical support and training to users.
• Troubleshoot and resolve system issues.
• Participate in business analysis and technical design sessions.
• Ensure compliance with industry regulations.
• Document system processes and present progress reports.
• Collaborate with team members and other departments to ensure smooth operation.

The Security Architect Head will shape and manage security architecture across all layers of the organization’s systems, protecting critical assets and ensuring regulatory compliance.

Key Responsibilities:

· Act as the security architecture expert, ensuring alignment with regulations.

· Design, implement, and maintain robust security solutions across various layers, including OS, applications, infrastructure, and integrations.

· Establish multi-layered security controls to build resilience.

· Conduct reviews to strengthen the security posture and ensure regulatory compliance.

· Develop and oversee the organization’s cloud security strategy using modern technologies and native services.

· Mentor and develop the Security Engineering team, fostering a learning culture.

· Engage with stakeholders to integrate security into business solutions and manage expectations.

Requirements:

· Degree in Computer Science, Computer Engineering, or Information Security.

· 12+ years of experience, with 5+ years in security architecture and 3+ years in team leadership.

· Proficient in AWS Cloud Security Engineering and DevSecOps SDLC.

· Security certifications like CISSP, CISM, CCSP, CISA, or AWS Certified Security are preferred

· Hands-on experience in managing complex security engineering and solution implementation in the FI industry is an advantage

· Knowledge of regulatory requirements and industry practices (e.g. MAS TRM Guidelines, MAS Cyber Hygiene etc.)

Role Overview:

Our client is looking for a Technical Support Specialist to join our team in Singapore. In this role, you will be at the forefront of our Electronic Shipping Solutions (ESS), helping customers integrate and maximize the benefits of our solutions. You will be responsible for delivering technical support, managing deployment projects, and driving continuous improvements in the adoption and success of our client's ESS.

Key Responsibilities:

Customer Engagement:

• Deliver engaging presentations to customers, showcasing the benefits of Electronic Shipping Solutions (ESS).
• Assist customers with onboarding and guide them through the implementation of ESS.
• Provide on-site and remote technical support to resolve issues and queries related to ESS.

Technical Support & Escalation:

• Act as a technical escalation point, resolving complex issues related to ESS.
• Ensure all solutions are configured and maintained according to IT policies, including version control and label format management.

Project Deployment:

• Proactively plan and manage the deployment of ESS, ensuring timelines and targets are met.
• Collaborate with the commercial and project teams to ensure successful ESS implementations.

Continuous Improvement & Innovation:

• Contribute to the continuous improvement of our solutions and processes, driving efficiency and customer satisfaction.
• Collaborate on various initiatives aimed at improving ESS services.

Customer Facing IT Helpdesk Support (Backup Role):

• Provide backup support for the Customer Facing IT Helpdesk, assisting with ESS-related queries and problems.

Key Performance Indicators (KPIs):

• Achievement of customer-facing IT objectives and deployment timelines for eCommerce tools.
• Meeting country and regional targets for ESS implementations.
• Timely and accurate reporting on project progress and performance.

Qualifications & Requirements:

Educational Requirements:

• Degree in Information Services or equivalent.

Experience:

• Minimum 2 years of experience in IT customer support, with a preference for candidates with experience in the eCommerce industry.
• Senior-level candidates should have 4-5 years of experience in a similar IT support role.
• Fresh Graduates are also welcome to apply

Technical Skills:

• Excellent IT skills with a strong understanding of eCommerce technology.
• Proficient in software tools (Word, Excel, PowerPoint)
• Strong analytical, organizational, and technical troubleshooting skills.
• Basic coding skills

Soft Skills:

• Strong presentation, communication (both spoken and written), and negotiation skills.
• Proven ability to influence decisions and work collaboratively across teams.
• Ability to manage multiple priorities and work effectively under pressure.

Competencies & Leadership Traits:

• Results Orientation: Demonstrates focus on achieving goals, overcoming obstacles, and delivering measurable results.
• Teamwork: Collaborates effectively with others to achieve shared goals and objectives.
• Adaptability: Remains optimistic and resilient in the face of challenges, managing uncertainty and change positively.
• Communication: Provides clear, concise, and timely information to internal and external stakeholders.
• Accountability: Acts with integrity, taking responsibility for actions and commitments.

Career Development:

• Next Steps: Possible career growth opportunities include roles such as Program Manager, Integration & Solutions or Project Manager.
• Feeder Roles: Candidates with technical support experience or a background in eCommerce-related IT services will be ideal for this position.

For quick response, applicants who express interest in this job advertisement, kindly contact 84945469.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.**

We wish you all the best in your career search.

EA Personnel Name: Jess Clarke
EA Personnel No: R24123918
EA License No: 03C5577

RED an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients.

We now seek an experienced Principal Electrical Engineer to be based in our Singapore office to inspire others. You will have the ability to run small and large sized projects, undertake a client facing role in the development, design, and co-ordination of engineering projects You will have experience in the delivery of data centres along with other sector experience including commercial, hotel, retail, and hotel design desirable.

Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio.

You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel / hospitality and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work ‘hands on’.

Job Description

Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Electrical installations, systems, equipment, facilities etc. (Several building types)

• Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes
• Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations
• Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements
• Day to day decision making on project progress and direct liaison with and provides advice to client
• Represents Company at technical meetings with customers, professional teams and contractors teams
• Ensures engineering calculations and drawings meet required robust industry and legal standards
• Leads on the coordination of engineering services

Takes a holistic view in the selection and application of engineering concepts and solutions

Qualifications / Experiences

• BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience
• MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent
• Working towards Chartered Eng status
• Significant experience of specification design for several building types
• Sound knowledge of key Health and Safety issues and legislatio
• Knowledge of MS Office applications word, excel etc
• Ability to use IT based calculation and spreadsheet softwar
• Good understanding of BS standards/ UK Regulations/Codes
• Ability to prioritise own workload
• Ability to work to deadlines
• Managerial skills
• Presentation skills

If you think you have what it takes to join an award winning team and help RED continue its exciting journey, we want to hear from you!

Responsibilities:

• Supervise/perform fault diagnosis, trouble shooting and maintenance of power system/component in workshops and onboard vessels
• Liaise with various departments within company and client to expedite the scope of work
• Lead a team of electricians in corrective and preventive maintenance
• Prepare work completion reports for Customer's Acceptance.
• Perform maintenance works in accordance with vessel safety requirement
• Conduct in-depth troubleshooting of electrical connections and Programmable Logic Controllers (PLC) programs.
• Coordinate with vendors and partners, conduct design reviews with customers, and maintain documentation according to our ISO quality systems.

Responsibilities:

• Liaise with appointed engineering firm and internal stakeholders
• Responsible for end-to-end project delivery, execution and documentation
• Participate in cross functional internal/external discussions for project execution
• Responsible for timely delivery and completion of project milestones and updates
• Ensure project completion within allocated budget expenditure

About You:

• Minimum 4 years of experience in the pharmaceutical industry
• Clean Utilities experience is preferred

Duration : 12 months. Option to extend/convert subject to performance review.

Design, code, test, implement, maintain, and support application.

Creates technical system designs that meet the business needs.

Delivers quality solutions with minimal rework.

Work independently on high complexity designs & programs.

Follow and help to establish architectural standards.

Estimate effort and write technical specifications that accurately reflect the design requirements and standards.

Create functional code from design specifications for new development, enhancements, or maintenance projects.

Database constructs and create database design specifications associated with new development or enhancements.

Provide customer support and conduct customer training as required.

10+ years of experience in Microsoft technologies.

Experience with Microsoft Dynamics CRM either in Azure or Government Commercial Cloud (GCC) is a must

Experience in supporting implementing large-scale, highly-available applications or large project implementation using Dynamics CRM

Strong experience with Dynamics 365 Customization and Configuration

Strong experience of the Power Platform (PowerAutomate, PowerApps, Power BI)

Object Relational Mapping (Entity Framework) and ADO.Net

C#.NET, .net core, ASP.NET Web Forms, ASP.Net MVC 4.0, jQuery, JavaScript.

Sound knowledge in Web technology.

Outstanding verbal and written communication skills

Strong troubleshooting skills and attention to detail

*We welcome junior level candidates also to apply!

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Our client is a one of the leading players in the Power & Motor Manufacturing industry. Due to business needs, they are now recruiting a Application Engineer to be part of their Engineer team to support their business needs. They are located in the East - easily accessible.

Job Description of Application Engineer:

• Assist the sales team in identifying optimal solutions during specification processes.
• Collaborate with the global engineering team to address product defects, issues, and technical inquiries.
• Evaluate and recommend engineering products to customers through selection, review, and proposal processes.
• Conduct on-site visits for technical troubleshooting and assessment purposes.
• Communicate effectively with customers to elucidate problems and present viable solutions.
• Cultivate and nurture positive relationships with customers to ensure their utmost satisfaction.

Requirement

• Diploma/ Degree in engineering field
• At least 3 - 5 years relevant experience in handling Marine accounts

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Requirement:

• Strong technical aptitude and the ability to understand and explain complex products and solutions
• Excellent communication and interpersonal skills, with the ability to build and maintain relationships with customers
• Problem-solving skills and the ability to think creatively to overcome challenges
• Strong negotiation and presentation skills
• Proficiency in Microsoft Office Suite and customer relationship management (CRM) tools
• Willingness to travel within the region as needed

Job Description:

• Proactively identify and pursue new sales opportunities within your assigned territory
• Develop and execute targeted sales strategies to meet and exceed sales targets
• Provide technical expertise and support to customers, ensuring their needs are met
• Collaborate with cross-functional teams to deliver seamless customer experiences
• Continuously monitor market trends and competitor activities to identify new avenues for growth
• Maintain accurate records of all customer interactions and sales activities
• Represent the company at trade shows, conferences, and other industry events