Geotechnical Engineer

Visit www.ourengineers.com

Undertake detailed design in Geotechnical field for different nature of projects
Develop design concepts and construction methodologies and provide leadership in sectional project execution
To liaise with Client, Client’s Consultants, Contractor, and Local Authorities to obtain design approval

Description:
Degree recognised by PE Board (Singapore).
3-5 years relevant experience in consulting firms (those above 5 years experience will be considered for Senior Engineer post)
Familiar with geotechnical design software such as Plaxis, RocScience, etc
Experience in design of deep excavations, foundations, ERSS, tunnelling, pipejacking, slope stabilisation, soil improvement, etc
Experience in civil, infrastructure, utilities, coastal and marine works

Job Description

• Industry/ Organization Type: High Speed Networking Service Provider
• Position Title: Field Service Technician/ Engineer
• Working Location: Ubi (Nearest MRT: Tai Seng) – Company transportation provided to travel to client location
• Working Hours: Monday to Friday, 9.00 am – 6.00 pm
• Salary Package: Up to $3000 + OT (Dependent on project) + Performance Bonus
• Duration: Permanent

Key Responsibilities

Field Service Engineer

• Work as part of a team to install, test, and commission company equipment, ensuring all systems are fully operational and meet client expectations.
• Assist with the setup and configuration of network-based systems, ensuring connectivity and functionality.
• Set up and configure security surveillance systems and access control systems, ensuring proper functionality and client satisfaction.
• Install and maintain radio communication equipment, ensuring uninterrupted communication services.
• Regularly service and maintain installed equipment to ensure optimal performance, including troubleshooting and repairs when necessary.
• Assist in project planning, coordination, and execution, ensuring timely completion of assignments.
• Participate in on-the-job training under senior engineers, developing your technical skills and expanding your field of expertise.

Field Service Technician

• Perform accurate installation and laying of electrical cables to ensure proper connectivity, adhering to industry standards and safety protocols.
• Assist in the testing and commissioning of electrical systems, ensuring that all equipment is safely operational and meets performance standards.
• Conduct routine general maintenance on installed electrical systems and equipment to maintain optimal functionality and reduce downtime.
• Diagnose and fix electrical faults and malfunctions, ensuring that issues are resolved promptly to minimize disruptions.
• Follow all safety regulations and protocols to ensure a safe working environment, including the proper use of personal protective equipment (PPE).
• Work closely with other technicians and engineers to complete tasks efficiently and effectively, ensuring all project goals are met on time.
• Training & Development: Participate in ongoing training programs to stay updated on the latest industry trends, electrical techniques, and safety standards.

APPLY NOW!!!

• Min. NITEC in Electronic or Electrical
• 1 year’s experience working with security surveillance systems, access control, or radio communication equipment preferred
• Training provided for those without experience
• Class 3 driver’s license preferred

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70103 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

We are seeking a skilled and motivated IT Operations & Support Engineer with expertise in on-premises cloud virtualization and infrastructure management. This role is critical for ensuring robust performance, security, and reliability of our IT infrastructure, including virtualized environments, network components, and cloud services. The successful candidate will be responsible for managing, administering, and monitoring a wide range of infrastructure elements, conducting troubleshooting, performing capacity management, and supporting continuous operations.

Key Responsibilities:

1. Infrastructure Management & MonitoringManage, administer, and monitor all aspects of on-premises infrastructure, ensuring optimal performance and uptime.
   Build, configure, and troubleshoot infrastructure components as needed to support business requirements.
   Conduct capacity planning, generate reports, and recommend improvements.
   
2. Virtualization & Cloud ManagementProvision new virtual machines and cloud resources on request.
   Troubleshoot cloud-related issues, escalate to vendors or stakeholders when necessary.
   Ensure compliance with patch management policies and leverage scripting (e.g., PowerShell) for automation tasks.
   Administer and monitor AWS services, including EC2, CloudWatch, RDS, VPC, and Storage Services.
   
3. Networking & SecuritySupport and manage Nutanix HCI and network devices including Aruba & Cisco switches, A10 vThunder Load Balancers, and Checkpoint Firewalls.
   CRUD (Create, Read, Update, Delete) management and monitoring of devices to ensure reliable and secure operation.
   Administer Active Directory (AD), DNS, M365, MS Teams, and certificates, including external certificates.
   
4. System AdministrationSupport a mixed OS environment, primarily Windows (90%) with some Linux (10%).
   Provision and configure new machines, maintaining consistent performance across environments.
   Perform patch compliance checks and updates, utilizing patch management tools effectively.
   
5. Backup & Recovery ManagementManage Veeam backup solutions, including agent and policy configuration.
   Monitor backup status and troubleshoot any issues, escalating to vendors when needed.
   Support disaster recovery (DR) exercises and ensure backup processes align with recovery objectives.
   
6. Security & Monitoring ToolsPreferred experience with CyberArk, SolarWinds, and Tanium for enhanced security and monitoring.
   
7. IT Service Management (ITSM)Utilize ITSM/ITIL best practices and ServiceNow for incident, service request, and change management.
   Ensure ownership and timely resolution of tickets, with accurate updates and implementation of required changes.
   
8. Standby & Maintenance SupportParticipate in a 24x7 on-call rotation for incident response and planned maintenance activities.
   Complete rostered duties, planned maintenance, and provide timely support during scheduled DR exercises.
   

Key Qualifications:

• Experience: 3-5+ years in infrastructure administration, virtualization, and cloud management.
• Technical Skills:Proficiency in managing on-premises and cloud-based virtual environments.
  Working knowledge of Nutanix HCI, Aruba & Cisco Switches, A10 vThunder Load Balancer, and Checkpoint Firewall.
  Strong background in AD, DNS, M365, MS Teams, and certificate management.
  Familiarity with AWS (EC2, CloudWatch, RDS, VPC, Storage Services).
  Backup management using Veeam; knowledge of CyberArk, SolarWinds, Tanium is advantageous.
  Experience with scripting (PowerShell) for automation is preferred.
  Familiarity with ITSM/ITIL processes and hands-on experience with ServiceNow.
  
• Additional Skills:Strong problem-solving abilities and escalation management.
  Excellent written and verbal communication skills.
  Ability to work in a 24x7 standby rotation and handle high-priority issues as they arise.
  

Job Summary:

ONION Technology Pte Ltd (OT) is a software provider that specializes in Hyperscale data center solutions. It is the APAC regional headquarters of Onion Software Inc., which was founded in Korea. We are currently seeking a highly skilled Bilingual Software Engineer who is fluent in Korean and English, with experience in software development and the ability to liaise with the Korea HQ software development team. The ideal candidate should also be willing to travel up to 50% of the time.

Responsibilities:

• Design, develop, and maintain software applications in C++ Builder
• Collaborate with cross-functional teams to identify and solve complex software problems
• Work with the Korea HQ software development team to ensure the software solutions meet the company's standards and requirements
• Participate in code and design reviews to ensure the software is scalable, reliable, and maintainable
• Write clear and concise technical documentation, including user manuals and software documentation
• Communicate effectively with clients and team members in both Korean and English
• Travel up to 50% of the time to meet with clients and team members across the APAC region.

Requirements:

• Bachelor's degree in Computer Science, Software Engineering, or a related field
• Minimum of 5 years of experience in software development
• Fluent in Korean and English (both written and spoken)
• Proficient in C++ Builder
• Strong problem-solving skills and attention to detail
• Excellent communication and interpersonal skills
• Ability to work effectively in a team-oriented, collaborative environment
• Willingness to travel up to 50% of the time

Preferred:

• Experience with Agile software development methodologies
• Familiarity with software development best practices, including source control, testing, and continuous integration
• Experience with other programming languages and technologies such as Java, Python, or JavaScript

If you meet the qualifications and are interested in this exciting opportunity, please submit your resume and cover letter in English and Korean for our consideration.

Job Description

• Industry/ Organization Type: Chemical Manufacturing
• Position Title: R&D Electrical Engineer
• Working Location: Central
• Working Hours: Monday to Friday (8.45 AM – 5.30 PM)
• Salary Package: Basic Salary up to $3,800 + AWS + Bonus + Transport Allowance + Flexible Benefits
• Duration: Contract (3 years – Renewable)

Key Responsibilities

• Use 3D CAD design tools and perform high-precision 3D printing (FDM & DLP).
• Build simple circuit boards for sensor control and data acquisition using basic microcontroller boards like Arduino, ESP32, or STM32.
• Test and assemble electronic and mechanical parts, and debug software using basic tools like Python or C++.
• Maintain laboratory inventory and handle laboratory administrative tasks (procurement, equipment maintenance/repairs, and safety matters).
• Perform administrative tasks, such as ordering and payment using the SAP system.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• NITEC/Diploma in Electrical Engineering, Mechanical Engineering, Bioengineering, or relevant discipline
• Basic experience in 3D CAD design software, like Solidworks and Fusion360
• Has experience with microcontroller boards like Arduino, Esp32, STM32
• Basic experience in handling simple electronics and basic hands-on soldering skills

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68612 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Singapore Based (Bukit Merah)
• 5 Days 8.30am to 6pm
• Salary - $2000 to $3000 + OT
• ITE or Diploma in Electrical / Electronics; 1 year working experience in installation in the field of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC literate.
• Career Progression Opportunities

Requirements

• At least ITE or Diploma in Electrical / Electronics
• 1 year working experience in installation in the field of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC literate
• Must have Class 3 license
• Knowledge of electrical & electronics

Job scope

• Report to the Asst. Service Manager
• Responsible for project, implementation, installation, testing & commissioning of the system
• To carry out the maintenance works and services according to the maintenance contract.
• To manage and supervise the work progress of each project site by attending regular site meetings, coordinating with appointed sub-contractors of various services to see to ensure that projects are completed on schedule.
• To ensure proper and accurate records and documentations for the repair & servicing
• To standby and attend service calls

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description:

• Oversee the implementation of new process and procedure.
• Evaluate and review current process performance to optimize productivity and workflow.
• Preparing reports and analyzing costs and feasibilities to ensure the budget constraint.
• Perform risk assessments of the equipment and processes being used as well as hazard identification.
• Assist process technicians in troubleshooting and investigating if any problems that arise with processes, procedures, and operations.
• Audit current plant process safety related issue for improvement.

Job Requirement:

• Good interpersonal and communication skill
• Preferable with process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Strong problem solving and analytical skill

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

Responsibility :

• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form BEV_B1;
• Ensure that all the civil & structural and M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations;
• Lead the RTOs to monitor, supervise and inspect works as directed by CAG, the project consultants, QPs and/or SRE;
• Supervise concreting, pavement, drainage construction works (applicable for C&S);
• Carry out checks on compaction and curing of concrete (applicable for C&S);
• Carry out checks on striking of formwork, re-props and removal of props (applicable for C&S);
• Carry out checks on quality & erection of precast components (applicable for C&S);

Qualification:

• Minimum four (4) years of relevant experience as a civil & structural engineer, of which at least 3 years shall be in supervision of works in projects similar in size and complexity; in particular deep excavation and foundation, cut and cover tunnel works and building works;
• Possess a civil and structural engineering degree recognised by the Professional Engineers Board of Singapore;
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;

Candidate is expected to carry out Test Board Maintenance activities (Visual inspection, testing, framing, rework, washing, drying, packing etc)

Candidate is also expected to identify issues by recognizing data trends and to be able to read diagram and information from circuit.

Candidate must be driven and able to work independently and systematically to maintain delivery of excellent services.

Basic mechanical, electrical and programming knowledge is preferred to facilitate troubleshooting and root cause analysis.

Responsibilities and Duties

• Repair and maintenance of Test Board

• Maintain max passing yield results

• Test Board Maintenance activities (Perform socket replacement and testing)

• Identify Issues

• Reporting of service activities

• Management of spare socket inventory

• Technical service on industrial chambers

Requirements

Service Engineer – Diploma in Engineering

Technical Specialist – Diploma in Engineering

1 - 2 Years Experience

Strong in hands-on, able to work independently with minimum supervision

Able to do soldering work on tiny component

Technical Specialist will assist Service Engineer in above duties. Diploma holders demonstrating good technical capabilities will be considered for Service Engineer

Able to do soldering work on tiny component

Job Scope:

• Supervise site operations and daily activities on construction or engineering sites
• Manage project timelines to ensure the project stays on schedule
• Coordinate with contractors, subcontractors, and suppliers for timely delivery of materials and services
• Ensure quality control by conducting site inspections and monitoring work to meet design specifications
• Monitor and enforce safety standards to comply with health and safety regulations
• Manage resources, including manpower, equipment, and materials for project efficiency
• Provide technical support and troubleshoot issues as they arise on-site
• Review plans, blueprints, and technical drawings, offering feedback and solutions
• Prepare daily and weekly progress reports for senior engineers or project managers
• Maintain accurate project documentation, including records of site activities and materials used
• Assist in cost control by monitoring project expenses and tracking material usage
• Supervise the installation of systems or equipment as required
• Collaborate with design engineers, architects, and other stakeholders to ensure project alignment with design
• Conduct and participate in site meetings to discuss progress, challenges, and next steps

Requirements:

• Degree in Civil Engineering or equivalent
• 3-5 years of relevant experience, with at least 2-3 years in LTA underground or MRT projects
• Experienced in managing underground projects, including D-wall, borepiling, and other structural works in Singapore.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

JOB SCOPE
Responsible for executing the company projects in building construction which covers.

• To review project specifications and technical clarifications
• To prepare method statements and check drawing discrepancies
• To carry out project planning, design, material requisition, cost control, project supervision and documentation
• To supervise the construction works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• To target and ensure timely and smooth progress of works
• To ensure quality of works is achieved and safety & environmental regulations are complied with
• To ensure project activities complied with the Company’s ISO system

JOB REQUIREMENTS

• Minimum a degree in Civil/Structural Engineering
• Minimum 5 years working experience in building construction
• Use of Autocad would be an advantage
• Proficient in using Microsoft Office and familiar with Microsoft Project
• Good communicative skills, able to interact with people of all levels and teamwork

Qualifications & Requirements:

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object[1]oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• Experience in multi-threading, socket programming and serial/USB communication.
• At least 5 years’ experience in object-oriented software development.
• Experience in container development with docker in IoT devices.
• Prior experience in following areas Scrum AGILE methodology process is a plus: o Scrum AGILE methodology process o Develop and integrate embedded devices with cloud platforms o Develop and integrate vehicle side Information Technology for Public Transport (ITxPT) services, like GNSS and AVMS services. Strong analytical and problem-solving skills
• Good written and verbal communication skills
• Self-motivated, independent and a good team player

Responsibilities:

• Working in a team to design and develop a real-time, reliable and secured e-payment devices that processes millions of public transport commuters’ cards daily. The activities required to be performed shall include the following:
• Requirements gathering.
• Design and develop software applications for embedded devices.
• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the SDLC processes.
• Assist day-to-day application support issues.
• Liaise with users on the requirement testing and production issues

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

(ll) Requirements

Education

• Bachelor's degree in Mechanical, Electrical, or a related field.

Experience

• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards.

Skills & knowledge

• Profound knowledge of M&E and piping systems and technologies.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

Job Description: Software Engineer

As a Software Engineer at D-SIMLAB Technologies, you will gain exposure to both technical and soft skills development while working on innovative software solutions for world-leading semiconductor manufacturers. This role extends beyond software development, involving close collaboration with clients and providing professional consultation services to support their operational needs.

Key Responsibilities:

• Software Product Deployment and Delivery:
  Collaborate with a team of Software Engineers and Data Scientists to ensure smooth deployment and delivery of D-SIMLAB’s software products at semiconductor manufacturing sites. Work with global clients to address their technical needs and deliver high-quality solutions.
• Product Enhancement:
  Contribute to the continuous improvement of D-SIMLAB’s software, focusing on areas such as data visualization and algorithm optimization to improve product quality and user experience. Actively participate in product development cycles, from conceptualization to implementation.
• Key Software Component Development:
  Take ownership of the development and maintenance of critical software components, ensuring scalability, performance, and reliability in diverse manufacturing environments.
• Client Consultation:
  Provide technical expertise and consultation to customers, helping them implement and optimize D-SIMLAB’s software solutions in their manufacturing processes.
  Assist in troubleshooting and problem-solving to enhance client satisfaction.
• Collaboration and Innovation:
  Work in a multicultural and multidisciplinary team, contributing to innovative ideas and technical solutions. Stay updated on the latest technology trends and actively seek ways to improve the efficiency and performance of the software.

Candidate Requirements:

• Education:
  Bachelor’s or Master’s degree in Computer Science, Software Engineering, Industrial Engineering, or a related field.
  Diploma holders with relevant experience are encouraged to apply.
• Technical Skills:
  Strong skills in C#, .NET, SQL.
  Familiarity with software development life cycles, agile methodologies, and version control systems.
  Experience with algorithms, data structures, and software architecture design.
  Experience with visualization frameworks and tools is an advantage.
• Soft Skills:
  Strong interpersonal and communication skills, with the ability to work effectively with clients and teams from different technical and cultural backgrounds.
• Adaptability and Willingness to Travel:
  Willingness to travel internationally and work on challenging projects at semiconductor manufacturing sites. Ability to adapt quickly to new environments and work under pressure to meet project deadlines.
• Career Growth:
  Interest in personal and professional growth by enhancing both technical and soft skills.Fresh graduates are welcome to apply.

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests
  

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
  Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision
  

Installation, commissioning and modification of marine switch boards and systems

Breaker calibration and testing.

Handling projects as requested by ship yard.

Testing and servicing of devices listed below

Gauges as well as transmitters for Temperature and pressure (VDO).

Safety devices for generators such as over current protection relays, reverse power protection relays (Omron, DEIF, and Crompton).

Panels such as engine alarm panel, fire alarm panel and bilge alarm panel.

Electrical instruments such as Voltmeter, ammeter, frequency meter, power factor meter & kilo wattmeter (DEIF, & selco).

Switchgears (Mitsubishi, Terasaki, Merlin gerin, & Siemens).

Testing, trouble shooting and upgrading the following panels

Diesel and shaft Generators(Caterpillar and Cummins)

Main and emergency switch boards

Generator set control panels

Fire detection system

Tank alarm system

Cranes

Navigation lights

Motors

Starters including variable drives and soft starter.

Candidate with experience as stated below will be an added advantage:-

a. Working with LTA and related Agencies

b. Underground pipe laying for Power & Telco

c. Road Works (Milling & Patching)

d. ERSS - Earth Retaining Support Sysytem

e. Site management and coordinations

f. Proper communications and detailed information flow

Infrastructure & Platform Services Team
You will help to build and sustain strong technology foundations forming the bedrock of our digital solutions.

What impact can you make in this role?
We are looking for Lead Cloud Engineer, who will enable our Cloud Native transformation efforts in alignment with the next iteration of our customer’s technology transformation journey, all with the goal of driving developer velocity and therefore business agility and value. This role will see synergistic collaboration with senior leadership and teams/squads of product-minded architects, engineers, and application developers, who are passionate about “building cloud applications and not just applications in the cloud”.

What will you do as an Cloud Engineer, Technology Group?

Enable Cloud Native transformation strategy and roadmap

• Enable the next iteration of cloud strategy by planning and executing against the vision for an agile organization that leverages cloud native to take full advantage of cloud computing
• Communicate the case for and benefits of increased cloud native adoption to senior stakeholders, business units and business solution teams
• Enable roadmaps and pathways for the rationalization and modernization of applications to just-right cloud services, platform, and architecture within our hybrid cloud (public and private) ecosystem
• Measure and track progress of cloud strategy through the development of effective Key Performance Indicators (KPIs) that set the conditions for successful cloud native adoption, culture, behaviour, and differentiating business outcomes

Enable Cloud Centre of Practice and Excellence

• Champion and exemplify cloud native practices, including cloud native philosophy, architecture, principles, and culture
• Lead product management, including research and proof-of-concept, for emerging cloud native services and platforms, for example, enterprise containerization, landing zones, orchestration, and automation
• Define cloud reference architecture, standards, and processes within the enterprise, for example, provide opinionated landing zones that comprise a set of policies or rules to enforce a security baseline and prevent non-compliant activities
• Perform cloud governance role in disciplines like identity & access management, tenant/account management, security & compliance, and billing
• Provide common tooling, solutions, and patterns for cloud native adoption and developer enablement, productivity, and self-service
• Assist application and developer teams to onboard applications to hybrid cloud (public and/or private) services and platforms
• Provide education and learning opportunities to enable teams to understand existing and emerging cloud computing technologies, as part of overall cloud capabilities building

Deliver Cloud Engineering and Operations

• Implement opinionated set of technologies, on top of cloud service provider(s), to consolidate institutional knowledge, tooling, patterns and practices; and deployable artifacts to production
• Provision cloud services to developer teams based on pre-stipulated service level agreements
• Manage the maintenance of virtual appliances, for example, AMI, and base container images
• Manage cloud operations disciplines like patch management, network configuration, certificate management, logging agents, and intrusion detection
• Steward cloud spend and budget, including the monitoring of cumulative usage, identifying of areas for optimization, managing reserved instances (RI) and negotiating on committed spend agreements
• Manage support vendor partnerships through regular vendor stewardship meetings and service level and escalation reporting

Provide technical leadership

• Provide technical coaching and mentoring to enterprise architects, application and infrastructure teams on cloud native architecture, philosophy, and practices

What qualifications or skills should you possess in this role?

• At least 8 years of relevant experience in delivering hybrid cloud strategies, operating models, and technology service management practices
• Bachelor’s Degree or Master’s in Computer Science, Information Technology or equivalent
• Some return-on-investment and business case development experience
• Strong communication abilities to influence key stakeholders ranging from C-level executives, MDs, CISO, application architects and subject matter experts
• Proven track record of delivering cloud applications on Amazon AWS and Microsoft Azure using cloud-native design and patterns
• Proven experience in designing microservices, event driven architecture using open source, .NET, NodeJS, Python, Java, message queues, streaming, databases, and cloud data services
• Extensive experience in architecting applications and automation technologies to meet the expected standards of availability, agility, capacity, resiliency, and security
• Hands-on experience with cloud technologies including, Docker, Kubernetes (particularly RedHat OpenShift 4.x), Infrastructure as Code, Service Mesh, Immutable Infrastructure, and declarative APIs
• Hands-on experience automating full lifecycle management of application hosting platforms in data center and public cloud using DevOps practices and CI/CD methodologies
• Strong understanding of Infrastructure and Platform Automation technology products such as Amazon CloudFormation, VMware vRealize Suite, HashiCorp Suite, Puppet, Ansible, and Chef
• Strong understanding of AGILE, LEAN or SaFE methodology
• Strong understanding and knowledge of industry technology standards, and security & compliance frameworks (e.g. NIST, CIS, CSM) and experience working with audit and regulatory bodies
• One or more AWS/Azure Certifications at Professional and/or Specialty level

The Quality Engineer applies engineering principles and techniques to meet the quality targets and organisational objectives in a manufacturing environment. He/She also assists in analysing manufacturing and quality issues make recommendations for out of control processes.

In addition, the Quality Engineer participates in quality improvement projects in accordance with organisational objectives.

The Quality Engineer is required to have strong communication skills, good teamwork and an analytical mind to perform his/her role well to achieve the desired organisational outcomes.

~ Assist in implementation of improvement projects.
~ Attend to internal or external audits related issues.
~ Collect data for analysis.
~ Enforce practices of good safety culture and good manufacturing practices.
~ Ensure adherence to processes and procedures.
~ Ensure all quality plans are properly documented and maintained.
~ Ensure no expired tools running in the production line.
~ Facilitate the implementation of quality system in the organisation.
~ Identify opportunity for continuous improvement projects.
~ Implement calibration cost reduction activities.
~ Interpret information provided by the network/dashboard for quality performance monitoring.
~ Maintain production yield targets.
~ Monitoring quality control and assurance processes.
~ Perform evaluation/experiments.
~ Supervise manufacturing work for workplace safety and health compliance.

• Perform all roles and responsibilities required of site supervisors under the Building Control Act, regardless whether their names are stated in the form BEV_B1;
• Ensure that all the civil & structural and M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations;
• Lead the RTOs to monitor, supervise and inspect works as directed by CAG, the project consultants, QPs and/or SRE;
• Supervise concreting, pavement, drainage construction works (applicable for C&S);
• Carry out checks on compaction and curing of concrete (applicable for C&S);
• Carry out checks on striking of formwork, re-props and removal of props (applicable for C&S);
• Carry out checks on quality & erection of precast components (applicable for C&S);
• Check on structural steel works (applicable for C&S);
• Check and assess temporary works and ERSS by the contractors to ensure that the C&S, M&E and building works are safe and in compliance with all relevant regulations;
• Carry out coordination of all services, help resolve contractors’ queries and provide feedback on site issues, discrepancies and irregularities to QP(S), project consultants and/or CAG ;
• Review contractor’s submissions (shop drawings, method statements, risk assessment, test plans, soil sample test results, test cube results, DSM core results etc), and report any non-compliance with the Contract and authority’s requirements to CAG, the project consultants and/or QP(S);
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies;
• To attend site, progress, variation and coordination meetings and to keep proper minutes of these meetings. To follow up and report to QP(S), QP(D) and CAG within two (2) days for site issues raised during the meetings;
• Attend QAQC meetings, monitor and check on quality on all works and materials on site; take measures to rectify any non-compliance and report of any materials that are not conforming to the Specifications;
• To facilitate the timely taking over of site parcels to be handed over by other contractors and highlight any issues that will delay the progress of the works;
• To take and carry out instructions from and represent the QP(S), QP(D) and CAG on site;
• To review all drawings (including shop drawings, construction drawings) and method statements and risk assessments to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Superintending Officer / Contractor / QPs, including checking of as-built drawings and Operation & Maintenance Manual submitted by the contractors and ensuring that the required construction tests associated with the construction works are carried out where necessary;
• Coordinate and compile the As-Built information for record purposes timely.
• Monitor the quality and progress of defects rectification works when necessary.
• Ensure that daily records of all civil and structural engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety, site diary, labour force, day works,provisional items or provisional quantities etc, are updated in a timely manner and properly kept;
• Keep accurate records of variations as instructed or approved and to maintain a set of updated drawings on site;
• Together with the safety team, provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site, provide safety oversight and ensure main contractors and their sub contractors adhere to the approved safe work
• procedures for the works and all relevant CAG and regulatory safety requirements; ensure mitigation controls in updated risk registers (Programme/Aerodrome/DfS) are duly implemented on site;
• Liaise with all relevant authorities;
• Adhere to the shift duty roster assigned;
• Undertake any other duties includign administrative tasks related to the project as and when instructed by the SRE, Consultants or CAG

Qualification:

• Minimum four (4) years of relevant experience as a civil & structural engineer, of which at least 3 years shall be in supervision of works in projects similar in size and complexity; in particular deep excavation and foundation, cut and cover tunnel works and building works;
• Possess a civil and structural engineering degree recognised by the Professional Engineers Board of Singapore;
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;
• Lead C&S and/or geotechnical site staff to monitor, supervise and inspect works as directed by CAG, QP(S), SRE, the project consultants and FUI owners. He must possess good leadership qualities, organisational and inter-personal skills;
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report;
• Possess strong supervision and leadership skills;
• Must be willing to work shifts.

Summary

This position is accountable for preparing the detailed Construction plans in accordance with the JGCAP’s company policies as the key person under the direction by JGCAP’s Site In-charge/ Project Manager and coordinating all construction activities on site among all JGCAP’s disciplines including subcontractors using his technical experiences and construction know-how and ensuring the completion of the work on schedule.

The detail plans as described above are as follows:

• Execution formation with the direction by JGCAP’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with JGCAP’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the JGCAP’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Interested parties, please send in your detailed resume.

Job Description

• Managing the testing and commissioning of water and wastewater onshore and offshore facilities (FPSO and etc).
• Lead the development and execution of commissioning and startup plans.
• Lead the development of written procedures for testing, cleaning and initial startup of major plant equipment and systems.
• Manage client/vendor/subcontractor coordination for the startup of completed systems. Provide training program and materials for process plant equipment.
• Manage documentation of the commissioning process, including commissioning data and as built documentation, input to O&Ms and feedback to the design disciplines.
• Communicate clearly and concisely, both verbally and in writing.
• Establish and maintain effective working relationships with those contacted in the course of work.
• Recognize the importance of satisfying the customer as the key to achieving other objectives.
• Participate in the acquisition and storing of business and technical knowledge, and the use of those stored intellectual assets.
• Maintain and Recognize that Health and Safety considerations are central to all tasks, and contribute to ensuring safe working environment for all.
• Report safety issues responsibly and participate in improving practice.
• Ensure your own continuous professional development by participating in external networking/conferences/associations/groups, to stay current on industry changes and innovations.
• To continue to develop personally and technically.
• Maintain a positive and solution-oriented approach to work, providing open and honest feedback.
• Attend Progress & Commissioning Meetings.
• Compile commissioning documentation and deliverables.

Requirements

• Degree in Chemical Engineering and/or Degree in Engineering (Mechanical)
• Strong Technical Knowledge
• Minimum 10 years of relevant experience in Water and Waste Treatment and experience in onshore/offshore Oil & Gas area or FPSO line(s)
• Travel to offshore project sites and perform offshore commissioning / assist facility startup
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Proficient in MS Office and Microsoft Project
• A resourceful self-starter who possess excellent problem-solving skills
• Systematic and able to work under pressure
• Mature, proactive, take initiative and well organized
• Meticulous and able to follow through with tasks promptly
• Proficiency using Microsoft Office and Microsoft Project, good report writing skills

Job Description

• Industry/Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Software Engineer (Product/Semiconductor)
• Working Location: Nearest MRT – Bendemeer/Lavender MRT
• Working Hours: Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + VB
• Duration: Permanent

Key Responsibilities

• Engage in software development and implementation specifically for high-speed automated equipment.
• Conduct software design, coding, testing, debugging, and validation processes.
• Evaluate and establish system performance specifications to ensure operational effectiveness.
• Provide technical software support to a team of field service engineers.
• Perform maintenance on existing software to improve efficiency and functionality.

APPLY NOW!!!

• Hold a degree in any Engineering discipline, with a minimum of 3 years of experience in software development within the automation or semiconductor industry.
• Possess strong programming skills in C / C++.
• Must have substantial hands-on experience in programming multi-threaded Windows applications using Visual C++.
• Have a good understanding of electronic components, motion control, and interfacing with inspection systems.
• Display strong capabilities in mathematical and algorithmic development.
• Willingness to travel overseas for field support as required by the company.
• Comfortable working overtime when necessary to meet project deadlines or during critical project phases.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69728 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

The exceptional EY experience. It's yours to build.

At EY, you’ll have the chance to build a career as unique as you are, with the global scale, support, inclusive culture and technology to become the best version of you. And we’re counting on your unique voice and perspective to help EY become even better, too. Join us and build an exceptional experience for yourself, and a better working world for all.

The opportunity:

EY DnA is the data and advanced analytics capability within EY Asia-Pacific, with over 500 specialist employees working across multiple industry sectors.

We implement information-driven strategies, data platforms and advanced data analytics solution systems that help grow, optimize and protect client organizations. We go beyond strategy and provide end to end design, build and implementation of real life data environments and have some of the best architects, project managers, business analysts, data scientists, big data engineers, developers and consultants in the region.

We are looking for a Data Engineer within the DnA team in our Singapore office. This role is offered on a flexible full time basis.

Your key responsibilities:

• Apply data mining, data modelling, natural language processing, and machine learning to extract and analyse information from large structured and unstructured datasets
• Develop and implement techniques and analytics applications to transform raw data into meaningful
  information using dataoriented programming languages and visualisation software.
• Visualise, interpret, and report data findings and may create dynamic data reports as well
• Design, develop, and maintain the organization's data architecture, including data pipelines, databases, and data warehouses.
• Develop and maintain ETL (Extract, Transform, Load) processes to efficiently move data from various sources to the data
• Implement data quality checks and monitoring processes to identify and resolve data issues in a timely manner.
• Collaborate with data scientists, analysts, and other cross-functional teams to understand data requirements and deliver data solutions that meet business needs.

Skills and attributes for success

• Experience in ETL, Data Engineering, Scripting.
• Knowledge and experience in end-to-end project delivery, either traditional SDLC or agile delivery methodologies (or hybrid approaches)
• Experience in a delivery role on Business Intelligence, Data Warehousing, Big Data or analytics projects
• Exceptional communication, documentation and presentation skills and stakeholder management experiences
• Experience in business intelligence, data warehousing/platform, and data strategy projects

To qualify for the role, you must have

• At least a Bachelor's degree in any of these faculties: Computer Science/Information Technology/Programming & Systems Analysis/Science (Computer Studies)
• Minimum total 6 years work experience in at least 1 of these job titles: (1) Chief Data Scientist (2) Data Engineer (3) Data Scientist (4) Head of Data Analytics
• Experience in development and maintenance of Data processing pipelines
• Experience developing machine learning workflows
• Work closely with business analysts to create data components
• Application packaging and deployment experience across DEV to PROD environments

Ideally, you’ll also have

• Dashboarding experience with Tableau / Power BI
• Experience in engaging with both technical and non-technical stakeholders
• Consulting experience and background, including engaging directly with clients

What we look for

• Highly motivated individuals with excellent problem-solving skills and the ability to prioritize shifting workloads in a rapidly changing industry.
• An effective communicator, you’ll be a confident leader equipped with strong people management skills and a genuine passion to make things happen in a dynamic organization.

What we offer

EY offers a competitive remuneration package commensurate with your work experience where you’ll be rewarded for your individual and team performance. We are committed to being an inclusive employer and are happy to consider flexible working arrangements, where this may be needed, guided by our FWA Policy.

Plus, we offer:

• Continuous learning: You’ll develop the mindset and skills to navigate whatever comes next.
• Success as defined by you: We’ll provide the tools and flexibility, so you can make a meaningful impact, your way.
• Transformative leadership: We’ll give you the insights, coaching and confidence to be the leader the world needs.
• Diverse and inclusive culture: You’ll be embraced for who you are and empowered to use your voice to help others find theirs.

If you can demonstrate that you meet the criteria above, apply now.

To learn more about our service offerings, visit https://www.ey.com/en_gl/careers/what-you-can-do-here or subscribe to http://www.youtube.com/ernstandyoungglobal

To learn more about careers in EYSG, please visit https://www.ey.com/en_sg/careers or like us on https://www.facebook.com/eycareerssingapore

Duties & Responsibilities

• Prepare, interpret and evaluate stress/vibration result.
• Review piping layout and piping information.
• Review piping engineering progress against approved schedule.
• Evaluating changes and taking corrective action when required.
• Provide technical guidance, executing and coordinating the above responsibilities to ensure timely completion and meets project schedule and budget.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements

• Bachelor’s degree in Mechanical Engineering.
• Minimum 10 years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support.
• Good knowledge of Caesar II.
• Interpretation of stress/ vibration analysis report.
• Basic knowledge of AutoCAD.
• Basic knowledge of 3D model review through Naviswork or SPR.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication skills.