M&E Technical Manager (Electrical/ Mechanical)

• Working Day: 5 Days | Mon – Fri 8.30am – 6pm
• Location: Ang Mo Kio, Singapore
• Salary: S$ 6,000 - 9,000 + Bonus
• Singapore M&E Service Providers

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical & Electrical services.
• Good knowledge in M&E works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Job scope

• Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (1 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.

Job Description:

• Collaborate with consultants to manage and coordinate M&E design works for MRT projects.
• Oversee and develop CCSM and M&E designs in consultation with LTA, SWCs, and relevant authorities.
• Review specifications, ensure compliance with terms and conditions, interpret drawings, obtain budget approvals, and manage related documentation.
• Plan and technically coordinate the installation of M&E services.
• Supervise and work closely with consultants, sub-contractors, and site operations teams to ensure smooth on-site installation processes.
• Liaise with relevant authorities to secure design approvals and work permits.
• Coordinate sub-contractors' M&E activities, monitor schedules, and ensure high-quality deliverables throughout the project.
• Ensure compliance with construction procedures and safety standards, guaranteeing quality workmanship that meets stringent requirements during site tests and inspections.

Job Requirements:

• Bachelor's Degree in Mechanical or Electrical Engineering or a related field.
• Minimum of 10 years of relevant experience, including supervision of at least two LTA MRT underground projects of similar scale and complexity.
• Proficiency in BIM software and AutoCAD is highly advantageous.
• Experience in drafting tender specifications is preferred.
• Strong communication, analytical, and writing skills.

Interested applicants please click apply now!

Hey Rocket Pte. Ltd. (EA 21C0816)
Tan Zi Jian (R23116456)

Duties & Responsibilities:

• Responsible for the formulation of schedules and datelines for design and date of submission.
• Check detailed design and drawings based on relevant codes and client specifications, while ensuring the most cost-efficient methods of design are used.
• Liaise and co-ordinate with Project Department to obtain relevant information for detailed design.
• Determine the conditions and study all pertaining data thoroughly and accurately for a design. Many different combinations of loadings are possible and the most probable combination of simultaneous load for an economical and safe design is selected.
• Control and issue all technical documents.
• Any ad hoc project assigned by Design Manager.

Min Qualifications / Experience:

• Bachelor’s degree in mechanical engineering with minimum 3 years relevant experience

Job Skills Required:

• Mechanical design of pressure vessels, heat exchangers & atmospheric storage tanks. Thermal design of heat exchangers is also a required skill.
• Familiar with international design codes such as ASME, British, Australian & European Codes, Tema, API650 & etc.
• Proficient in design software such as PVELite, NozzlePro, StaadPro & Autocad.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected]or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Lee Jia Chian (Jayleen)
EA Personnel Reg No: R24124361

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (3 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description

• Industry/ Organization Type: Chemical Manufacturer
• Position Title: Maintenance Technician (Mechanical)
• Working Location: West (Nearest MRT: Tuas Crescent)
• Working Hours: 5 days (Monday-Friday: 8 am-5 pm)
• Salary Package: Up to SGD 5500 + Allowance SGD 220 + OT Pay + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Maintain, repair, and troubleshoot all plant equipment.
• Schedule and perform preventative maintenance.
• Participate in 5S and Total Productive Maintenance (TPM) teams.
• Assist in developing new equipment or plant expansion projects.
• Ensure contractor safety and oversee specific inspections or maintenance tasks.
• Maintain accurate maintenance records.
• Safely handle hazardous chemicals within the plant.
• Perform mechanical preventative and corrective maintenance on plant utilities, facilities, and manufacturing equipment.
• Operate and maintain systems such as steam boilers, water treatment, HVAC, air compressors, chemical and gas systems, and fire protection systems.
• Assist in spare part management.
• Maintain effective communication between shifts for smooth work transition.
• Process permits, conduct job safety analysis, and manage Lock-out, Tag-out (LOTO) procedures.
• Review and contribute to maintenance documentation such as Safe Work Procedures (SWP) and Job Safety Analysis (JSA).
• Report work progress to supervisors daily or as needed.
• Use a Computerized Maintenance Management System (CMMS) to manage work orders and checklists.
• Ensure contractors and third-party vendors execute maintenance tasks efficiently and adhere to safety regulations.
• Perform equipment or system testing, commissioning, and inspections to hand over to the operations team after maintenance or project completion.
• Participate in routine safety drills, troubleshooting, and failure analysis.
• Serve as an on-call technician for emergency maintenance after working hours.
• Suggest and implement ideas for continuous improvement in maintenance procedures to optimize costs, processes, and safety standards.
• Assist in maintaining spare parts inventory and ensure proper preservation in the store.

APPLY NOW!!!

• Min. ITE in Engineering.
• Min.3 years of maintenance experience in a related field, ideally within a chemical manufacturing environment.
• Proficient in the use of hand and power tools.
• Have basic knowledge of process control, refrigeration, boilers, steam systems, pumps, heat exchangers, Lockout/Tagout (LOTO) procedures, and industrial safety practices.
• Experience in electrical work or water treatment is an advantage.
• Willing to work OT on Sat.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68758 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costing
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure timely completion of an assign tender

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 year of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active, and responsible
• Abie to work under a tight timeline
• Must be a team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Technician
• Working Location: Ang Mo Kio
• Working Hours: 5 Days/ 6 Days per week, 9am – 6pm
• Salary Package: Basic Salary + OT + AWS
• Duration: Permanent

Key Responsibilities

• Install, maintain and repair electrical machines.
• Identify and diagnose issues with machinery to perform timely repairs.
• Perform routine maintenance and inspections to ensure optimal performance.
• Assist with the development of existing or new machines.
• Helps in the sourcing of machine parts and liaise with vendors when required.
• Other ad hoc duties as assigned.

APPLY NOW!!!

• Proven experience in the electrical and machinery fields.
• With good understanding of electrical systems.
• Technical drawing knowledge is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #68614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Responsibilities:

• Tabulate quantities, estimate cost and request for quotation
• Knowledge of electrical products and costings
• Updating contract documents, drawings, and correspondences
• Submission of progress claims and site valuations
• Preparation of Variation Order for submission
• Liaise with subcontractors and clients
• Ensure the timely completion of a given tender assignment

Requirements:

• Candidates must possess at least Diploma/Degree in Quantity Surveyor or Engineering or equivalent
• Minimum 1 years of QS experience
• Computer skills – Microsoft office skill (Excel, Words. AutoCAD, etc.)
• Independent, resourceful, pro-active and responsible
• Able to work under a tight timeline
• Must be a team player

Benefits

• 14 Days Annual Leave
• 14 Days MC
• AWS + PB (Depends of yearly Business)
• Yearly Entertainment Allowance
• Company Trip
• Company Activities

Job Descriptions & Requirements :

The Junior Technician is responsible for the diagnostic, testing as well as repair, production and overhaul of mechanical, electrical and electronic components of the chillers and other related systems in support of our overall chiller manufacturing process with fellow technicians.

Key Responsibilities:

· Manufacture industrial chillers in collaboration with other technicians encompassing sheet metal work, welding, assembly of refrigeration system, electrical wiring, temperature controller setup

· Evaluate final product’s overall performance, reliability and safety

· Diagnose, test as well as manufacture, repair and overhaul mechanical, electrical and electronic components of the chillers and other related systems in accordance to production BOM/ WO

· Delivery of chillers and components to end customers and setup on-site

· Generate 2D engineering & electrical drawings with Autocad software

· Perform all other duties as assigned and required.

Requirements:

· Candidate must possess at least a Diploma in Engineering (Electrical/Mechanical) or equivalent.

· At least 2 – 3 year(s) of working experience in HVAC/ Industrial Chiller fields

· Required Skill(s): 2D Autocad

· Required Spoken and Written Language(s): Basic English, Mandarin

· Singapore/SPR Only

· Preferably with class 3 driving license

· Salary will commensurate with qualifications and experience

· Working Hours : Mon to Fri (8.00 am to 5.00pm) & Sat (8.00am to 3.00pm)

If you are keen to join Group of Weeseng, contact us at 6245 2712 or email to

finance@ weeseng.com

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Design and develop high-precision semiconductor equipment to meet the processing and automation needs of customers.
• Understand the design specification given to you by the design lead.
• Understand the company’s design standards and best practices.
• Understand the constraints within which your design must work.
• Understand geometric tolerances and dimensional analyses.
• Choose components based on an understanding of function, reliability, and costs.
• Choose materials based on an understanding of materials science and engineering.
• Understand design for manufacturability/assembly.
• Work with the Electrical Engineer to choose drives and electrical components (if any).
• Discuss with the Software Engineer on any interlocking logic requirements.
• Lay the design concept down in the 3D CAD.
• Perform DFMEA during the design process.
• Submit the CAD module to the system integrator to check for interface issues.
• Review the design with the design lead.
• Put the part designs down on drawings, carefully specifying tolerances and specifications.
• Build the module BOM.
• Procure the module components.
• Review the assembly of the physical module.
• Perform design improvements where appropriate.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

Karen Lee Kai En Reg No: R22108159

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Location: Ubi

Responsibilities

• Follow the Project Management Process from award until handover including all statutory requirements and deliverables
• Develop comprehensive project plan for multiple projects
• Reviews project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available resources to various phases of project to ensure project progresses on schedule and within budget.
• Coordinate and be involved in pre-& post tender survey for SED/ ordering and pre-con survey on the existing building (applicable to MOD projects only).
• Other ad hoc duties assigned

Requirements

• Diploma / Degree in Mechanical, Electrical &/or electronics Engineering and Project Management or equivalent with minimum 4 years of work experiences
• Experience in project management in lifts & escalator (preferred) or other relevant experience is a plus.
• Proficient in Microsoft Office applications.
• Spare parts finder database and SAP experience is an advantage

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

We are seeking skilled Mechanical Fitters to join our team in delivering high-quality services for Power Plant and Oil & Gas projects. The role involves the assembly, installation, maintenance, and repair of mechanical equipment, ensuring compliance with industry standards and Singapore MOM safety regulations. The ideal candidate will have technical expertise, attention to detail, and a strong commitment to safety and quality.

Key Responsibilities:

1. Installation & Assembly:

- Assemble, install, and align mechanical components such as pumps, turbines, heat exchangers, piping systems, and structural supports.

- Read and interpret blueprints, technical drawings, and manuals to ensure precise work execution.

2. Maintenance & Repairs:

- Conduct preventive and corrective maintenance on mechanical systems and equipment.

- Diagnose mechanical issues and carry out repairs, including replacing worn- out or damaged components.

3. Inspection & Testing:

- Perform equipment inspections to identify potential issues and ensure compliance with safety and performance standards.

- Conduct functional tests and pressure tests to validate equipment integrity.

4. Safety &Compliance:

- Adhere to workplace safety protocols and MOM regulations, including the proper use of PPE.

- Participate in toolbox meetings, hazard assessments, and emergency drills.

5. Documentation:

- Maintain accurate logs and reports of maintenance, repair activities, and inspection findings.

- Provide feedback on equipment performance to supervisors and technical teams

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

We are seeking skilled Mechanical Fitters to join our team in delivering high-quality services for Power Plant and Oil & Gas projects. The role involves the assembly, installation, maintenance, and repair of mechanical equipment, ensuring compliance with industry standards and Singapore MOM safety regulations. The ideal candidate will have technical expertise, attention to detail, and a strong commitment to safety and quality.

Key Responsibilities:

1. Installation & Assembly:

- Assemble, install, and align mechanical components such as pumps, turbines, heat exchangers, piping systems, and structural supports.

- Read and interpret blueprints, technical drawings, and manuals to ensure precise work execution.

2. Maintenance & Repairs:

- Conduct preventive and corrective maintenance on mechanical systems and equipment.

- Diagnose mechanical issues and carry out repairs, including replacing worn- out or damaged components.

3. Inspection & Testing:

- Perform equipment inspections to identify potential issues and ensure compliance with safety and performance standards.

- Conduct functional tests and pressure tests to validate equipment integrity.

4. Safety &Compliance:

- Adhere to workplace safety protocols and MOM regulations, including the proper use of PPE.

- Participate in toolbox meetings, hazard assessments, and emergency drills.

5. Documentation:

- Maintain accurate logs and reports of maintenance, repair activities, and inspection findings.

- Provide feedback on equipment performance to supervisors and technical teams.

Mechanical Supervisor

We are looking for a highly skilled Mechanical Supervisorwith a minimum of 5 years of experience in overseeing mechanical projects in Power Plant and Oil & Gas industries. The ideal candidate will be responsible for supervising the installation, maintenance, and repair of mechanical systems and equipment while ensuring compliance with safety regulations, quality standards, and project timelines.

Key Responsibilities:

1. Project Supervision:

- Plan, supervise, and coordinate mechanical work activities to ensure smooth execution.

- Manage and lead a team of mechanical fitters, technicians, and subcontractors to meet project objectives.

2. Installation & Maintenance:

- Oversee the installation, alignment, and maintenance of mechanical equipment, including pumps, valves, compressors, and piping systems.

- Review and verify technical drawings, specifications, and blueprints to ensure accuracy during execution.

3. Safety & Compliance:

- Ensure adherence to all safety protocols and MOM regulations on-site.

- Conduct safety briefings, toolbox meetings, and risk assessments for all team members.

4. Quality Assurance:

- Inspect completed work to ensure compliance with industry standards, project specifications, and client requirements.

- Address and resolve any quality-related issues promptly.

5. Team Management:

- Provide technical guidance, training, and mentorship to team members.

- Evaluate team performance and recommend improvements or additional training as needed.

6. Reporting & Documentation:

- Prepare and submit daily progress reports, manpower records, and inspection checklists.

- Communicate effectively with project managers, clients, and stakeholders to provide updates and resolve concerns.

Skills:

· Strong knowledge of mechanical systems, equipment, and tools.

· Proficiency in interpreting technical drawings, schematics, and manuals.

· Excellent leadership, communication, and organizational skills.

· Ability to troubleshoot and resolve complex mechanical issues efficiently.

·Familiarity with industry codes and standards, such as ASME, API, and ISO.