· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

1. Responsible for co-ordination of all technical activities on assigned project and assist in ensuring successful completion and execution of the assigned projects.

2. Participate in client or contractor site meetings and inspections to ensure site installation is carried in accordance to the technical specification of the project.

3. Ensure effective communication and coordination between all disciplines and project participants in the projects, to resolve all site issue hindering the work progress.

4. Assist in planning, scheduling and coordination of works and ensure proper deliverables and full compliance to the authority standards.

5. Assist in all project management and coordination activities delegated by project manager; including day-to-day interaction with clients, preparation of project proposals and production coordination.

6. Assist in all project administration where required

7. Report to the Project Manager on any site issues hindering the work progress. For example, report any change of design or architectural plan, incurring addition work to our trade. Highlight those changes that might results omission or variation cost.

8. Report to the Project Manager monthly work progress carried out on site.

9. Any other duties as assigned by Management from time to time.

Requirements:

1. At least a diploma in civil engineering and 5 years working experience in civil engineering project.

2. Must be able to co-ordinate with clients, inspectors, suppliers, workers and subcons.

3. Able to interpret drawing, able to generate shop drwing and cutting list.

4. Must be able to commit Saturday workdays.

5. Able to fulfill task with minimum supervision.

6. Ableto schedule daily work activities, deployment with workforce and resources.

7. Able to write Method of Statement adn Risk Assessment.

• Design, analyze, and supervise structural components, including formwork and precast elements, in alignment with project specifications.
• Coordinate with the construction team to ensure effective integration of structural designs into the overall project.
• Review and approve structural designs and calculations, focusing on the stability and durability of high-rise building components.
• Conduct inspections and assessments of structural work to ensure compliance with industry standards and safety regulations.
• Work closely with architects, project managers, and other engineers to address technical challenges and develop effective solutions.

Requirements:

• Bachelor’s Degree in Civil or Structural Engineering.
• Minimum of 5 years of experience in structural engineering within high-rise building construction.
• Proven expertise in precast components and system formwork for office buildings.
• Strong problem-solving skills with a meticulous eye for detail.
• Ability to work collaboratively in a team and communicate effectively across disciplines.

Facilities Executive x 1

5 day week

My client is a country club.

• Well verse in M&E building Services for daily operation & maintainance.
• Coordinate works of relocation contractors with Technology, Security, on site Facilities Management teams as well as other contractors from the date of appointment to the last day of move completion
• Generally inspect and audit all items to be relocated before and after the move activities to ensure completeness and accuracy of inventory
• Support and assist in preventive maintenance schedules, may need to support as a team for hands-on maintenance.
• Assist small projects/Churn work (e.g. minor renovations, enhancement projects, replacements or repairs).
• Candidates from Projects/ Service are also welcome to apply.

Responsibilities:

- Design, build, and manage secure, scalable, and efficient cloud-based

systems on Google Cloud Platform (GCP)

- Develop and deploy cloud-native applications using GCP services such

as Compute Engine, App Engine, Kubernetes Engine, and Cloud Storage

- Migrate on-premises infrastructure to GCP, ensuring minimal

downtime and optimal resource utilization

- Ensure compliance with security and regulatory requirements,

implementing Identity and Access Management (IAM) and other

security measures

- Collaborate with cross-functional teams to identify business

requirements and develop technical solutions

- Optimize system performance, monitoring, and logging using GCP tools

like Stackdriver and Cloud Monitoring

- Stay up-to-date with GCP innovations and best practices, applying

expertise to continuously improve cloud architecture

Requirements:

- Google Cloud Certified - Professional Cloud Developer or Cloud

Architect certification

- 2+ years of experience in cloud computing, preferably with GCP

- Strong understanding of cloud architecture, migration, and

deployment

- Proficiency in programming languages like Java, Python, or C++

- Experience with agile development methodologies and version

control systems like Git

- Excellent problem-solving skills and attention to detail

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to A-IT Software Services Pte Ltd’s PDPA and e2i PDPA.

Job Responsibilities:

• Technical Support & Troubleshooting: Serve as the first point of contact for IT-related issues, diagnosing and resolving hardware, software, and network connectivity problems for end-users. Resolve technical problems promptly and escalate complex issues to senior team members when necessary.
• Network Monitoring & Maintenance: Regularly monitor network systems, outages, performance and security alerts. Assist in routine maintenance tasks and update network equipment as directed by senior network engineers.
• Audio & Video System Support: Manage the setup and troubleshooting of audio and video conferencing systems, ensuring smooth operation for meetings and remote communication.
• Network Security Support: Assist in monitoring network security protocols, respond to security alerts, and work with senior IT staff to ensure data protection and compliance with company policies.
• User Account & Access Management: Create, manage, and deactivate user accounts, permissions, and access levels in Active Directory and other systems, ensuring appropriate access control and security.
• Hardware & Software Setup: Support the setup, configuration, and troubleshooting of computers, printers, server, network devices and other IT equipment, as well as the installation and maintenance of software applications.
• IT Equipment & Network Configuration: Responsible for configuring IT equipment, administering network servers, and supporting PC setups to maintain reliable system operations.
• Documentation & Reporting: Keep thorough records of all incidents, resolutions, and network changes, and maintain IT documentation, including network diagrams, troubleshooting guides, and system configurations.
• Asset & Inventory Management: Track IT assets, including hardware inventory and software licenses, ensuring records are accurate and equipment is up-to-date.
• End-User Education: Educate employees on IT best practices, such as safe browsing, password management, and basic troubleshooting, to improve overall user experience and reduce support requests.
• Collaboration & Escalation: Work closely with senior network engineers and other IT team members, escalating advanced network or support issues as needed, to maintain a smooth and secure IT environment.
• Continuous Improvement: Stay updated on the latest technologies, network practices, and company-specific systems to continuously enhance support effectiveness and technical expertise.
• Innovation Initiatives: Contribute to conceptualizing and enhancing the organization’s innovative capabilities by supporting and facilitating the implementation of innovation projects.

Job Requirements:

• Diploma in Computer Science, Engineering or any related discipline
• Good knowledge of System Administration and Networking
• Possess at least 1 year of network experience
• Meticulous, good interpersonal and communication skills.
• A team player and willing to learn.
• Able to work independently or with little supervision

• Oversee the setup, upkeep, and management of servers, networks, and cloud infrastructure.
• Design, implement, migrate, troubleshoot, and maintain IT network infrastructure, focusing on backup, security, redundancy, and disaster recovery.
• Analyze and validate network architecture through usability testing, providing recommendations for upgrades.
• Monitor and report on network performance and status to key stakeholders.
• Plan and manage the deployment and maintenance of end-user computing devices.
• Coordinate and execute tasks for IT operations projects.
• Support the implementation of ISO27001 information security measures and associated security systems.

Qualifications

• Bachelor's degree in Computer Science, Information Technology, or related field.
• Proven experience in digital infrastructure architecture, network design, and cybersecurity strategy.
• Proficiency in cloud platforms, network monitoring tools, and cybersecurity frameworks.
• Strong analytical skills and the ability to communicate complex technical concepts to non-technical stakeholders.

To apply, please visit www.gmprecruit.com and search for Job Reference:

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Key Qualifications

• Proficiency in programming languages such as Java, Python, or JavaScript.
• Experience with cloud hosting platforms such as AWS, Azure, or Google Cloud Platform.
• Strong understanding of Kubernetes and containerisation technologies.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work effectively in a team environment.

Description
- Design, develop, and maintain full stack applications, with a focus on platform development and cloud hosting.

- Collaborate with multi-functional teams to define project requirements and deliver high-quality solutions.

- Implement best practices for software development, including code reviews, testing, and documentation.

- Optimise application performance and scalability through the use of Kubernetes and other cloud technologies.

- Develop and maintain deployment pipelines to automate the software release process.

- Stay up-to-date with the latest trends and technologies in software development and platform engineering.

Education & Experience

Bachelor's degree in Computer Science, Engineering, or related field.

G-Cube Engineering Pte Ltd, an Established Engineering Company, with focus in Electrical Engineering, Mechanical Engineering and Renewable Energy Engineering. We are a systems integrator focused on providing Engineering Services energy to all customers and are dedicated to support our employees.

We are looking for a Project Engineer to assist with the scheduling and managing of our project technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

Job Responsibility:

• Project Execution Including Coordination with Contractors And Project Related Duties
• Ensure Project-Engineering Work Is Completed Accurately And On Schedule
• To Plan Works Schedule and Work Out Material Requirement For Purchasing Department
• Provides Regular Update Of Engineering Status, Drawings, Bill of Material, etc.
• Prepare Weekly Progress Reports and Weekly Work Plan on Project Work
• Prepare Installation/Engineering Drawing
• Attend Site Meetings with Clients / Architects and Authorities On Project Technical Matter
• Candidate Should Be Open to Working On-Site

Job Requirements:

Education & Qualification

• Diploma or Degree in Electrical Engineering

Knowledge & Skills

• Knowledge of Electrical Engineering & Mechanical Engineering
• Knowledge of Renewable Energy Engineering
• Good Communication Skills And Able To Interact With All Level Of Staff
• Good In Planning, Reporting & Problem Solving Skills
• Competent In MS Office, MS Excel & AutoCAD
• Responsible, Detail-Oriented And Able To Multi Task
• Independent & Team player.
• Proactive and able to take initiative

Experience

• Minimum 2 years of relevant experiences

• Plan, build and optimize infrastructure setup, design and performance.
• Manage backend information systems, including of virtual machines and virtualization platform, including of network storage, backup, Fibre channel switches.
• In-depth experience in Linux administration. Need to be expert level
• Strong understanding of High Availability setup for Linux/Windows applications (etc. webs, database)
• Strong network fundamentals – IPv4/IPv6 – addressing, NAT, Routing
• Network and Systems troubleshooting and maintenance
• Good to have disaster recovery planning and execution
• Private cloud administration experience is a must – VMWare / Hypervisor
• In-depth experience in DNS, DHCP, Proxies, Linux firewalls & network security is a must.
• Maintain and Administer Security Appliances of different projects
• Design and propose a plan that will improve the hosting service of the Data Center

We are seeking a highly skilled Software Engineer with at least 3 years of project experience in developing web applications using PHP, PHP frameworks (such as Laravel, Symfony, or CodeIgniter), JavaScript, and databases like MySQL and PostgreSQL. The ideal candidate will have a strong technical background and the initiative to take leadership to complete technical tasks efficiently.

Responsibilities:

• Develop, test, and maintain web applications using PHP and related technologies.
• Design and implement scalable and secure backend components.
• Participate in code reviews to ensure code quality and share knowledge.
• Troubleshoot and resolve application issues and bugs.
• Document development processes, code changes, and system configurations.
• Stay up-to-date with emerging technologies and industry trends.

Qualifications:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• At least 3 years of experience in PHP development.
• Proven experience with PHP frameworks like Laravel, Symfony, or CodeIgniter.
• Strong understanding of frontend technologies such as JavaScript, HTML5, and CSS3.
• Experience with database management systems such as MySQL or PostgreSQL.
• Experience with Git and RESTful API.
• Candidates with experience in large-scale robotics backend development are preferred.
• Familiarity with web security best practices.
• Excellent problem-solving skills and attention to detail.
• Good communication and teamwork abilities.

• Upkeep record of department equipment/assets.
• Execute both static and dynamic measurement such as dimension control and flow measurement not limiting to shore/ship tanks, piping, flow meters and instrument validation for custody transfer purposes.
• Process data collected and prepare all necessary reporting for review.
• Assist in the development and training of staff to required level of expertise.
• Ensure that all operations are conducted within client’s health and safety requirements.
• Assist in the implementation of department Quality system per the QA Manual.
• Perform any other task that may be assigned from time to time by Management.
• All jobs done in accordance to SGS Standard Procedures and/or Local Procedures where applicable.

Requirements:

• Diploma or equivalent in the field of Electrical or Electronic Engineering discipline
• Preferably 2 years of working experience
• Good computing skills and knowledge
• Possess local class 3 driving licence will be an added advantage
• Good communication, negotiation and interpersonal skills
• Good team player, works well under pressure and able to challenge status quo
• Able to work independently and to coordinate several activities simultaneously
• Able to ensure that process flow and work delivery is accurate and timely
• Able to give best customer care and services
• In addition, an added advantage for candidate who possess one or more of the following skills as follows:
• Instrumentation validation/verification/flow measurement
• Dimension control measurement via Total Station or theodolite
• Good computer knowledge in MS Office particularly Advanced Excel
• Any 3D software knowledge, autocad, etc…
• Coding or programing capability

• Plan, build and optimize infrastructure setup, design and performance.
• Manage backend information systems, including of virtual machines and virtualization platform, including of network storage, backup, Fibre channel switches.
• In-depth experience in Linux administration. Need to be expert level
• Strong understanding of High Availability setup for Linux/Windows applications (etc. webs, database)
• Strong network fundamentals – IPv4/IPv6 – addressing, NAT, Routing
• Network and Systems troubleshooting and maintenance
• Good to have disaster recovery planning and execution
• Private cloud administration experience is a must – VMWare / Hypervisor
• In-depth experience in DNS, DHCP, Proxies, Linux firewalls & network security is a must.
• Maintain and Administer Security Appliances of different projects
• Design and propose a plan that will improve the hosting service of the Data Center

Why Join Us?

• Attractive Newcomer Bonus
• Saturday work allowance
• Career Progression & Development Opportunities
• Opportunity to Work Alongside an Innovative Team
• Comprehensive Leave Packages (e.g: additional leave, birthday leave, eldercare leave, marriage leave & gift, etc...)
• Annual Executive Health Screening

Job Responsibilities:

• Develop, maintain and manage working relationships with clients and all related parties.
• Manage and implement overall project.
• Coordinate with Project Manager on project matters
• Supervise and provide advice to junior Project Engineer(s)
• Check working drawing, identify discrepancies for resolution
• Keeping track on variation and claims of contract
• Perform project cost review on a regular basis and on identified areas.
• Plan and manage project schedule to ensure timely delivery.
• Perform incoming inspection on project materials delivered on site by suppliers or vendors.
• Site coordination with subcontractors, supervisors and clients.
• Ad-hoc duties as assigned by superior(s).

Job Requirements:

• Degree in Civil & Structural Engineering (Certificates must be recognized by PE Board).
• Has relevant experience in infrastructure projects, e.g. roads and rail projects
• Open to fresh graduates with training provided for skill development and guidance
• Possess skills, knowledge and ability to supervise and manage project effectively
• Independent, resulted-oriented and self-driven team player with good communication skills

1. Maintain and improve the existing software and server system.

2. Analyze and resolve technical and application problems.

3. Degree/Diploma in software engineering or computer science

4. Minimum of 1 year of development experience with one of C#, C++, VB and Microsoft SQL

5. Knowledge and experience in using javascript, html, css will be an extra advantage

6. Familiar with object-oriented design and analysis

Job Descriptions:

*Assist the Project Engineer and Project Manager in project planning and to co-ordinate and oversee all works on the site.

*Monitor & co-ordinate the works with supervisors.

*Handling of technical and engineering problems.

*Assist in planning, programming and monitoring of construction works progress.

*Liaison with client's representative, relevant authorities and consultants.

*Identify and assess any foreseeable risk arising from the workplace or work processes, minimise environmental impact associated with the construction activities.

*Take reasonable practical measures to eliminate any foreseeable risk to any person who is at the workplace.

*Ensure safe work procedures and environmental control measures are implemented at the work site.

Job Requirements:

*Degree in Civil / Structural Engineering or its equivalent.

*Preferably Degree be recognized by Board of Engineers.

*Minimum 3 yrs experience in Residential Construction Industry.

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

Software Engineer

The successful incumbent will join our R&D team and work on GUI/ Cloud resources to ensure a seamless interface and cloud integration for our application.

Key Responsibilities:

• Collaborate with product managers, designers, and other stakeholders to translate business requirements into technical solutions.
• Design, develop, and deploy scalable and responsive web applications using modern front-end and back-end technologies.
• Write clean, efficient, and well-documented code following best practices and coding standards.
• Implement and integrate third-party APIs, services, and libraries to enhance application functionality.
• Optimize web applications for speed, responsiveness, and scalability across various devices and browsers.
• Stay updated on emerging technologies, trends, and industry best practices to continuously improve our development processes and tools.
• Collaborate with the IT team to maintain and support existing web applications, troubleshoot issues, and implement enhancements as needed.

Requirements

• Bachelor of Engineering in Computer Science or Information Technology or equivalent
• Have between 2 to 3 years of experience in full-stack web application development. Java, HTML, CSS, and JavaScript, React.JS, or Vue.JS, Node.JS, Python or Spring Boot 2 and above, MongoDB, MySQL.
• Design, develop, and maintain scalable, responsive web applications (full-stack).
• Ensure the technical feasibility of UI/UX designs and translate them into high-quality code.
• Optimize applications for maximum speed and scalability while ensuring application security.
• Troubleshoot, test, and maintain the core product software to ensure strong optimization and functionality.

Responsibilities:

• Liaise with customers and internal stakeholders to understand requirements, develop project plans and coordinate projects.
• Assist the business development team in identifying and developing new projects.
• Support the preparation of tenders.
• Prepare project budgets and technical specifications.
• Assist the operations team with Capex projects.
• Oversee project progress and ensure milestones are achieved.
• Prepare detailed reports and presentations upon project completion.
• Work with architects, engineers, consultants, contractors and clients throughout the project lifecycle.
• Support the procurement team in selecting vendors and provide relevant technical information to facilitate the procurement of equipment and services for the project.

Requirements:

• Bachelor’s degree or Diploma in Engineering (Mechanical, Civil, Electrical, or related field)
• Minimum 2 years of experience in project engineering or a related role
• Strong organizational and communication skills
• Ability to manage multiple projects and meet deadlines
• Technical proficiency in project planning and documentation
• Collaborative mindset with experience working with diverse teams

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

You will work as an integral part of the laboratory operations team, providing support to the laboratory manager in operations and related laboratory duties such as safety matters, procurement and core equipment training. If you thrive in a dynamic environment and have a passion for managing laboratory operations and contributing to scientific advancements, this role could be an exciting fit for you!

Key Responsibilities

• Oversee the daily operations of the laboratory, ensuring that all processes and procedures are followed accurately and efficiently
  Facilitate training and development of laboratory users
  Support the operations team on laboratory safety and documentation
  Ensure compliance with all relevant regulations and safety standards to maintain a safe working environment
  Manage the laboratory procurement of equipment and supplies, including negotiating contracts with vendors and suppliers
  Implement and oversee maintenance schedules for laboratory equipment to ensure optimal performance and longevity
  Maintain the microfabrication cleanroom in functional state
  Stay abreast of technological advancements to enhance operational effectiveness.
  Other ad-hoc duties

Qualifications

• Bachelor’s Degree in Engineering or related field from a reputable university
• At least one year of working experience in a research/laboratory environment and familiarity with research operations
• Working experience in rapid prototyping, CAD or cleanroom microfabrication is preferred, but not necessary
• Understanding of safety regulations and compliance
• Ability to work cooperatively and communicate effectively with team members and researchers
• Passionate in mastering research equipment and passing on knowledge to users

To apply, please send your cover letter, CV and three references (name, institution, email). Only shortlisted candidates will be contacted.

Task Management:

• Preliminary vessel concept work for tendering
• Prepare 2D & 3D drawings/models for construction
• Engineering system calculations to various classification society rules
• Preparation & review of production drawings for construction
• Follow approved company processes as defined in the Strategic Marine Business Management System
• Assist in the development of design office standards / procedures
• Able to take on project management tasks
• Ensure OHSE policies & guidelines are carried out

People Management:

• Provide technical and professional support to junior staff

Interpersonal Management:

• Liaise with Project Managers and Designers
• Liaise with class and flag societies
• Liaise with customers to meet contracted requirements
• Liaise with external design organisations
• Liaise with production departments to provide technical support

Information Management: (Will this person be handling paperwork e.g. reports, forms, invoices, drawings, documentation, etc? What will this involve?)

• Provide regular communications to the Design Manager
• Attend Design & Project meetings and conference calls
• Provide info on work accomplished for B.O.D. reports on monthly basis to the Design Manager
• Ensure proper filing and documentation of drawings, calculations & other project documents in the design server
• Maintain an accurate project design register
• Provide weekly timesheets to Accounts and Design Manager

Personal Management: (How will this person have to behave to be successful in this job e.g. Honest, Reliable Punctual?)

• Open, respectful & approachable
• Act with integrity and honesty
• Continue to develop skills and industry knowledge through a variety of means
• Ability to work unsupervised to meet deadlines
• Flexibility and ability to multi-task
• Ability to mentor and develop junior staff
• Passionate about boats and a desire to work on a range of vessel types

1. Responsible for co-ordination of all technical activities on assigned project and assist in ensuring successful completion and execution of the assigned projects.

2. Participate in client or contractor site meetings and inspections to ensure site installation is carried in accordance to the technical specification of the project.

3. Ensure effective communication and coordination between all disciplines and project participants in the projects, to resolve all site issue hindering the work progress.

4. Assist in planning, scheduling and coordination of works and ensure proper deliverables and full compliance to the authority standards.

5. Assist in all project management and coordination activities delegated by project manager; including day-to-day interaction with clients, preparation of project proposals and production coordination.

6. Assist in all project administration where required

7. Report to the Project Manager on any site issues hindering the work progress. For example, report any change of design or architectural plan, incurring addition work to our trade. Highlight those changes that might results omission or variation cost.

8. Report to the Project Manager monthly work progress carried out on site.

9. Any other duties as assigned by Management from time to time.

Responsibilities

• Account for all the execution of site progress
• To prepare technical specifications
• Attends Job set-up meetings, and site meetings to assists in resolving technical/operation issues
• Schedule for work activities and inspection
• Preparing, scheduling, and coordinating with Consultants, Main Contractor, Architect, and Subcontractors to ensure efficient and timely delivery of site works
• Assist in the coordination of multi-disciplinary works within a project including handling project planning, budget and cost control, safety, and quality system implementation
• Assist with cost control and estimating activities
• On-site to supervise to carry out work
• Overall planning, implementation, execution, and completion of sections of the project to ensure successful completion of the project
• Coordinated with multiple sub-constructors in preparing master plans, design briefs, and obtaining all necessary permits
• Planning and forecasting of budgets and timelines to assure that the project is accurately completed to schedule
• Report and monitor the progress of project to the Project Manager
• Assisting the Project Manager on ad-hoc tasks assigned.

Requirement

• NTC or Diploma or Degree in Electrical Engineering/Mechanical Engineering
• Familiar with Electrical/ACMV/Fire Protection/ Plumbing & Sanitary in Singapore
• Min 3 years’ experience in Mechanical & Electrical Engineering related works in office fit-out and construction industry
• The candidate will assist and support the Project Manager in handling and monitoring the progress of projects.
• PR or Singaporean preferable.
• 5.5 days work week.

Service Engineer

We are at the heart of every place that matters: as a leading global provider in the access solutions market, we enable people to move seamlessly in safe, secure and sustainable places.

Do you want your work to matter? Then join our team!

At dormakaba, more than 16,000 people from all over the world work together and grow together. If you are looking for exciting career prospects, if you want to fuel innovation and like tackling new challenges, then we would love to hear from you!

Our Singapore Service team is always on the lookout for talents and help you reach your best potential!

Role & Responsibilities

· Provide customer support for our Company’s products such as handling their enquiries with tact and courtesy.

· Perform on-site advice, installation, preventive maintenance and repairs of our Company products.

· Offer aftersales solutions and training to customers on product features, configuration, usage and maintenance.

· Proactive in informing customers of additional product and services we offer.

· Handle all essential resources, materials and equipments for effective and efficient delivery.

Key Competencies

· Good level of customer service experience.

· Good communication skills to enable interaction with internal and external customers.

Qualification:

· NITEC/ Diploma in IT/Engineering/Electrical/Mechanical/Computer-related or equivalent discipline.

· Candidates without prior working experience are welcome as on-the-job training will be provided.

· Possess a valid Singapore Class 3 Driving License.

Benefits:

· Learning culture where every employee is engaged in learning and development growth.

· Team programs and activities that celebrate individual and team’s success.

· Long service award recognition for our committed and dedicated colleagues.

· Health insurance and flexi-benefits cater for the employee’s health and wellness.

Is this you? Access your career at dormakaba today!

Diversity, Equity & Inclusion is part of our overall business and sustainability strategy. We consider all applicants equally throughout the whole recruitment process without regard to culture, age, ethnicity, gender identity, disability, marital status, language, national origin, physical/ mental ability, religion, sexual orientation, socio-economic status, underrepresented communities, etc. We do not use unfair selection methods for any of our positions, all employees are appointed based on performance and suitability for the role