Production Engineer

Our client is a MNC chemical manufacturer company. They are currently seeking for Production Engineer to improve the production technology of the site.

The role of the Production Engineer includes:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint.
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization.
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.

Job Requirement:

·       Bachelor’s degree in science, technology, or engineering.

·       Minimum five (5) years of relevant engineering/production work experience in chemical industry.

·       Experience in designing or optimizing the process control system of chemical plants.

·       Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).

·       Knowledge of mass and heat balance calculations of chemical plants.

·       Demonstrated skill to in leadership, developing others, and working in a teambased environment.

·       Outstanding verbal and written communication, presentation, interpersonal, creative thinking, consulting, and analytical skills.

·       Excellent communication skills.

·       Ability to prioritize work to manage multiple projects to meet deadlines.

·       Excellent problem-solving/decision-making skills.

·       Ability to multi-task.

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly send in your latest job resume without your NRIC numbers and other ID numbers.

For job resume(s) that contain NRIC numbers and/ or ID details, it may not be processed and your job application may be rejected due to improper submission of job application details. Please refer to the advisory guidelines on the PDPA for NRIC numbers and other ID numbers.

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

Visa’s Technology Organization is a community of problem solvers and innovators reshaping the future of commerce.   We operate the world’s most sophisticated processing networks capable of handling more than 65k secure transactions a second across 80M merchants, 15k Financial Institutions, and billions of everyday people.   While working with us you’ll get to work on complex distributed systems and solve massive scale problems centered on new payment flows, business and data solutions, cyber security, and B2C platforms.     

The Opportunity: 

We are looking for Versatile, curious, and energetic Software Engineers who embrace solving complex challenges on a global scale.  As a Visa Software Engineer, you will be an integral part of a multi-functional development team inventing, designing, building, and testing software products that reach a truly global customer base. While building components of powerful payment technology, you will get to see your efforts shaping the digital future of monetary transactions.   

The Work itself: 

• Design code and systems that touch 40% of the world population while influencing Visa’s internal standards for scalability, security, and reusability 

• Collaborate multi-functionally to create design artifacts and develop best-in-class software solutions for multiple Visa technical offerings 

• Actively contribute to product quality improvements, valuable service technology, and new business flows in diverse agile squads 

• Develop robust and scalable products intended for a myriad of customers including end-user merchants, b2b, and business to government solutions. 

• Leverage innovative technologies to build the next generation of Payment Services, Transaction Platforms, Real-Time Payments, and Buy Now Pay Later Technology 

• Opportunities to make a difference on a global or local scale through mentorship and continued learning opportunities 

Essential Functions:

• Demonstrates relevant technical working knowledge to understand requirements.

• Identifies and contributes to the development and solution strategies to team members that improve the design and functionality of interface features across one or more project features, under minimal guidance.

• Applies standard processes on the use of programming languages (e.g. HTML, C++, Java) to write code that fulfills website modification requests and technical requirements. 

• Collaborates with others to support the piloting of new technology capabilities and features that enhance the user website experience across e-commerce products.

• Analyzes bugs for simple issues and applies debugging tools to verify assumptions.

The Skills You Bring:

• Energy and Experience: A growth mindset that is curious and passionate about technologies and enjoys challenging projects on a global scale

• Challenge the Status Quo: Comfort in pushing the boundaries, ‘hacking’ beyond traditional solutions

• Language Expertise: Expertise in one or more general development languages (e.g., Java, C#, C++)

• Builder: Experience building and deploying modern services and web applications with quality and scalability

• Learner: Constant drive to learn new technologies such as Angular, React, Kubernetes, Docker, etc.

• Partnership: Experience collaborating with Product, Test, Dev-ops, and Agile/Scrum teams

**We do not expect that any single candidate would fulfill all of these characteristics. For instance, we have exciting team members who are really focused on building scalable systems but didn’t work with payments technology or web applications before joining Visa.

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600-$2800+OT+allowances>$3K

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

(1) Overview and purpose of the position*

1) Responsible in overseeing the performance of outsourced maintenance service providers in mechanical services and systems for the hospital and ensure functionality as well as serviceable at all times.

2)To audit and monitor service standards rendered by specialist vendor and outsourced maintenance service provider.

3)To provide support to Head of Department and Building Managers in capital nature replacements, systems and building improvement projects.

4)To coordinate and support hospital’s A&A and minor works.

(2) Accountabilities*

(2) Related Performance Indicators

1) Strong culture of staff and leadership accountability

• Work closely with FM Institution Lead and Mechanical Lead, in building clear scope, expectations and deliverables for the Mechanical team as well as planning for specialty training and develop the capabilities of Mechanical Team members.
• As a Subject matter expert to assist the Mechanical Lead in ensuring team members understands their scope.
• Work closely with team members, service provider and specialist vendors on system breakdown investigations, inspections, audits, review of maintenance program, etc.
• To lead / provide support in the investigation of incident/system failure to determine root cause of failure as needed.
• To participate and support in audits that the hospital subscribes to.

2) Contract management, evaluation, negotiation, and execution

• Manage Mechanical systems contracts to ensure timely renewals and contract requirements are fulfilled.
• Ensure timely renewal of authority licencing.
• Ensure processes are in accordance and compliance with Audit Compliance, NUHS Contract Management, Procurement and Finance Policies and Process.

3) Manage Managing Agent, vendors and liaison with authorities as well as communication to stakeholders

• To respond and support the maintenance agent and vendors in mitigating and recovery of critical system failure or incident.
• Work closely with Admin on compilation of contract documents, such as agreement, checklist, warranties, etc.
• Monitor vendors’ performance, deliverables and Key Performance Indicators (KPIs) are as per contract awarded.
• Perform invoice verification against works completed for timely processing of invoices.
• To ensure repair to reported system fault and breakdown are carried out in a timely manner.
• To carry out monthly analysis to Mechanical systems breakdown and recommend improvement plan as needed.
• Filing and documentation recording of all authorities’ correspondences.
• Conduct internal audits to check on non-compliances, identify gaps and follow-ups till closure.
• Represent Mechanical Team as the liaison party on authority matters.

4) Developing and implementing procedures, policies and checklists

• Review and update Standard Operating Procedures (SOP) and working instructions on a regular basis.
• Develop and harmonise trade related SOPs, Preventive Maintenance Checklists and working instructions with the cluster institutions for alignment to prevailing Singapore Standards / Code of Practices and/or industry best practices for benchmarking.

5) Asset Management

• Plan and oversee Mechanical system upgrades/improvements or replacements before their expiration or its end of life.

6) Projects

• Project Manager or render support to Project Managers for improvement works to existing hospital facilities such as renovation and retrofitting, replacement of system infrastructure and improvement initiatives to existing specialized systems and hospital facilities.
• Prepare Approval To Purchase (ATP) and Approval To Award (ATA) papers for Preventive Maintenance Contracts and projects.

7) Knowledge management

• Maintain good documentation (e.g records of all contracts, reports, agreements, check lists) with FM Admin team to ensure full compliance.

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Minimum three (3) years of relevant experience in management of mechanical systems operations. (Note: Minimum 8 years for Diploma Holders)
• Experience in Fire Safety/ Alarm System, Medical Gas/ Vacuum System, Lift and Escalator System, Pneumatic Tube System, Mechanical Automation system is advantageous.
• Health care experience is advantageous.
• Good interpersonal skills and customer service oriented.
• Positive work attitude, ability to work with all levels of staffs and strong team player.

Project Engineer (Mechanical)
Working day: 5.5 Days Work Week
Working Hour: Monday - Friday (8am - 5pm) | Saturday (8am - 12pm)
Salary: $3,500 - $6,000
Office Location: Woodlands | Project Site discuss during interview

Job Responsibilities:

• Site preparation and co-ordination, preparation of submission documents.
• Coordinate, liaise and manage various project stakeholders including customers, consultants, sub- contractors, vendors, etc. on site to ensure project requirements are met.
• Prepare and create detail work schedule, manpower and resource planning.
• Able to understand Engineering drawings and perform basic engineering calculations, design, etc.
• Coordinate the safety management system on site.
• Follow up and reporting on the project progress.
• Able to understand Singapore standards or Code of Practice.
• All other ad-hoc tasks as assigned by reporting manager.
• Work location Singapore Island wide.

Requirements:

• At least Diploma or Degree in related field of studies.
• Possess 3 to 5 years relevant experience in the local Construction Engineering industry. Including manufacturing plant construction, Data Centre fit-out works, etc.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Job Responsibilities:

Be responsible for creating CAD drawings and bill of materials – shipping containers and lifting apparatus.

Able to conduct finite element analysis, and sizing calculations for anti-vibration devices and protective foams.

Able to tabulate the required bill of materials.

Able to assist Procurement Team with Supplier’s enquiry.

Able to work with Production Team or Contractor for the manufacturing.

Able to work alongside Professional Engineer for equipment certification.

Able to write work instruction.

Job Requirements:

Min 3 to 5 years relevant experiences

Proficient in MS Office, Shared Point, & Solidworks.

Proficient in Written and Verbal Communication skills.

Experience with Structural Calculations and Analysis.

Able to write in a clear, concise manner, and generate comprehensive design reports.

Ability to adapt and multi-task.

Relevant work experience in logistics, semi-conductor or electronic industry is an advantage.

Experience in the creation and implementation of continuous improvement program is an advantage.

Able to speak Mandarin as this position needs to communicate with Mandarin speaking counterpart.

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2600, after 3 months $2700

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Role:

As a Graduate Software Engineer, you’ll join our Engineering team in June 2025. This full-time role offers a chance to make a meaningful impact and kickstart your career. 

How You’ll Make an Impact: In this role, you will:

• Collaborate cross-functionally to shape and build our product.
• Create clear, consistent, and high-performing interfaces.
• Understand and solve customer challenges.

Growth and Development:

At Wise, we believe in continuous learning and development. You will have access to:

• Company Onboarding and Engineering Bootcamp during your first weeks - introduction to Wise and to the engineering tools and terminology we use at Wise, designed to bridge the gap between university and working in a live production environment
• Engineering Academy - a 9 months programme of essential technical topics for engineering graduates. Topics are selected and delivered by our engineering community on a bi-monthly basis
• Mentorship/ buddy programme - you will have a buddy assigned to you to give you as much possible connection with people who know what you’re going through!

Electrical Engineer (Satellite, Radio Frequency)/ Geotechnical Engineer

The Electrical Engineer is required to attend to pre-sale electrical matters and provide suggestions on project specification and give calculation on the amount of electricity consumption.

Responsibilities:

• To conduct and lead design reviews for Radio Frequency/ Satellite, Network communication systems.
• Responsible for SATCOM/Micro Wave system and network configurations, acceptance, interface and performance testing and commissioning of SATCOM/Microwave systems.
• Understand contractual and project requirements and specifications, propose and generate (SATCOM/MW) system architecture and designs.

Requirements:

• Good in handling Electrical Engineering skills and provide calculation on electricity consumption.
• Ability to calculate on the amount of Electricity required.
• Expert in electrical engineering.
• Good in handling Single diagram and sizing; SLD
• Responsible in handling Electrical Input and output of the equipment and Sizing of electrical equipment
• Good in handling Modulators and Voltage regulator
• Experience in handling Low noise amplifier and Electrical wiring.
• Good in handling Electricity Calculation, Drawing, Design and management of electrical specification with cost and time line.
• Strong knowledge of Radio Frequency, Microwave, Satellite (Satcom) and Microwave.
• Diploma/Degree in Electronics/Electrical Communication Engineering.
• Experience in handling Radio Frequency/ Satellite and Network.
• Proficient in operating RF and electronics test and measuring equipment such as signal generator and spectrum analyzer
• Experience in Satellite/Microwave Communications and Network is an added advantage.

We respect your privacy and all communication will be treated with confidentiality.

If you have meet the job requirements that we are looking for or wish to find out more on this role, please contact us or apply in-confidence to us with your updated resume in MS Words format to : [email protected]

*Only shortlisted candidate will be notified.

Lee Kelvin No. R1872625

STAR CAREER CONSULTING PTE. LTD (EA License: 20C0353)

• Well Established Company
• Basic $3000 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Gul Circle (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Responsible for outdoor and indoor repair work of all cleaning products
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Required to work within the Company workshop where there is no outdoor repair
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Highlight:

• Japan MNC
• Permanent job opportunity
• 5 days work week, normal office working hours (8.30am - 5.30pm)
• Great remuneration & benefits
• Great career progression
• Location: Jurong Island (Company transport pickup @ Jurong East)

Responsibilities

• Responding to and resolving Customer and internal stakeholder technical requests concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of product technical knowledge, mechanical know-how of system components, and analytical skills while adhering to sound engineering principles, standards, practices and procedures.
• Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.
• Proactively identifying potential failures, assessing and controlling operational risks on the Power Train with support from the 24/7 remote monitoring hub and expert support
• Proactively advising and assisting the Customer in planning, coordination with MPW for the execution of relevant inspection and maintenance activities.
• Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance against the contractual guarantees and obligations. If necessary, recommend corrective actions.
• Reviewing and presenting the monthly monitoring diagnostic reports to the Customer.
• Reviewing and presenting the inspection findings and outage reports to the Customer.

Requirements:

• Previous site work experience in Long Term Service Agreements, plant commissioning, field service, and/or maintenance and overhaul of GTCC power plants or industrial plants rotating equipment is preferable.
• Previous customer facing experience where there is regular interaction with plant personnel to provide troubleshooting support and to resolve problems.
• Technical knowledge in GTCC operations and maintenance.

HOW TO APPLY:

Interested applicants, please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Vivian Chung Fhui Tiin

EA Personnel Reg No: R22106436

Responsibilities

• Appraise, troubleshoot, repair vacuum and mechanical products.
• Responsible for end-to-end pump servicing from installation, commissioning to after sales services
• Provide onsite advise to customers on technical issues.
• Project, perform and deliver under pressure with tight deadlines when necessary.
• Responsible for performing Installation and commissioning activities.
• Provide front line support for key field service activities in line with customers requirements. Examples being basic fault finding, rectification and planned maintenance activities.
• Able to use SAP to accurately capture service-related information as determined by the scope of responsibility for creation of field service notifications and orders, through to completion.
• Able to provide accurate, factual reports to the team leader or technical support personnel to enable informed decisions to be made on a course of action to resolve product issues.

Requirements

• ITE/ Diploma in Engineering
• MUST be able to commit to OT and 24/7 Standby
• Possess class 2 or 3 driving licenses with own transport added advantage

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Vivian Chung Fhui Tiin

EA Personnel Reg No: R22106436

JOB DESCRIPTION

We are looking for a strong candidate with strong AI background and experiences in audio, speech AI training for industrial projects on audio & speech recognitions.

Key Responsibilities: Work on audio processing, data preparation and multiple model training of multi-language code-switch ASR for projects.

JOB REQUIREMENT

• Has a related B.S degree in Computer Science or Software Engineering.
• Experiences in speech signal processing, speech recognition, in both hybrid models, supervised E2E models, LLMs fine-tuned models and deep learning
• Strong in the following programming languages: Python, Pytorch, C/C++, Linux Bash/Shell
• Knowledge in web-based and app developments for demo systems is advantageous

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

We are looking for a strong candidate with strong AI background and experiences in audio, speech AI training for industrial projects on audio & speech recognitions.

Key Responsibilities: Work on audio processing, data preparation and multiple model training of multi-language code-switch ASR for projects.

JOB REQUIREMENT

• Has a related B.S degree in Computer Science or Software Engineering with min 5 years of relevant experience
• Experiences in speech signal processing, speech recognition, in both hybrid models, supervised E2E models, LLMs fine-tuned models and deep learning
• Strong in the following programming languages: Python, Pytorch, C/C++, Linux Bash/Shell
• Knowledge in web-based and app developments for demo systems is advantageous

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Well Established Company
• Basic $4000 - $5000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Central
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• Monitor the day-to-day activities in the field, managing the flow of information, and reporting and tracking issues arising from progress, quality and safety
• Assist in completing the handover plan, ensuring documentation is completed and expectations are met on time and with quality
• Identify issues proactively and work with the team to resolve effectively
• Maintain and develop strong relationship with customers with direct interaction with focus on improving customers’ perception of service, quality, on time delivery, responsiveness, and problem solving
• Travel to various job sites required
• Ability to work overtime and weekends when required
• Effectively manage multiple projects
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Higher Nitec and/or Diploma in Electronics and/or Electrical Engineering or relevant field with 2-3 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Position: IT Field Service Engineer (Maintenance support/Network / Hardware issues – IBM/ DELL/ HP)
• Location: Ubi Techpark
• Working hours: 5 days work week; Monday to Friday: 9am - 6pm
• Salary (commensurate with experience): Gross up to $6000 (Basic up to $5500 + OT) + AWS + Allowance for mobile phone; Education Subsidy if applicable + Group Medical Plan
• Duration: Permanent
• Industry: Information & Communications Technology (ICT)

Main Responsibilities:

• Provide post sales maintenance support on servers/storage (IBM/HP/DELL/SUN) and operating systems (Linux/Unix/Windows) at customer locations;
• Troubleshooting and replacement of hardware;
• Troubleshooting of operating system;
• Handling of hardware migration/implementation project;
• Perform preventive and proactive maintenance;
• Escalation and management of complex issues.

Requirements:

• Diploma holder or above in Computer Engineering/Science or related discipline;
• Possessed at least 3 years of experience in IT hardware maintenance service on server, network and storage preventive.
• Strong server and storage hardware configuration knowledge will be an advantage;
• Be a quick learner in acquiring new system skills and working with new technologies;
• Capable of using operating systems: Microsoft Windows, Unix, ESX, and Linux are preferable;
• Proficiency in solving computer hardware related issues for IBM, DELL, and HP;
• Able to provide no office hour’s standby and support service

Email your resume to [email protected]

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job Description:

• Researching on electronic components and design new products to meet market needs.
• Supporting complete R&D project life cycle and participate in all phases from concept to manufacturing through designing, prototyping, validation and production of R&D products, taking into account the functionality, feasibility, quality, manufacturability, costs and completion time.
• Giving concise and informative demo/presentations to other team members or Product Managers about design concepts.
• Finalizing a design and its deliverables in order to facilitate a smooth transition to the relevant stakeholders.
• Preparing product documentation like bill of material, material specification and process documentation.
• Evaluating processes and design improvements.
• Coordinating with Global R&D team

Job Requirement:

• Bachelor’s degree in Engineering or Technology (Electrical/Electronics) from a recognized University/Institution.
• 2 to 3 years of industry relevant passive electronic component design experience.
• Understanding & work knowledge in AutoCAD Electrical.
• Experience with regulatory compliances (EMC) and industrial standards would be advantageous.
• Familiar with schematics capture / layout design tools and electronics measurement instruments (oscilloscope, data logger).
• Good understanding of product safety, environmental testing and electromagnetic compatibility (EMC) will be advantageous.
• Strong knowledge of electronics fundamental and principles.
• Strong passion for product design.
• Creativity and self-motivated.
• Knowledge of Microsoft Office Suite.
• Willing to travel frequently within South East Asia on a need to basis.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Vivian Chung Fhui Tiin
EA Personnel Reg No: R22106436

Job Summary:

· Salary package: Basic $3500 - $4000 + Performance Bonus

· Working hours: Monday to Friday 9am - 6pm

· Working location : Kallang

Job Responsibilities:

Job Objective:
•⁠ ⁠Work closely with manufacturers and Engineers to implement and service audio visual and video conferencing solutions in accordance to company’s standards and best practices to meet customer’s requirements

Core Responsibilities:
•⁠ ⁠System configuration, Testing & Commissioning of Integrated Audio Visual and Videoconferencing solution.
•⁠ ⁠Conduct end user trainings to end users on how to use the Solution(s) implemented.
•⁠ ⁠Work closely with in house AV Designers and Engineers from different manufactures to implement full integrated solutions for venues like meeting room, lecture room, experience centre, command centre, auditorium, ballroom, etc
•⁠ ⁠Study the schematic drawings to understand the technical & functional requirements to implement each solution
•⁠ ⁠Assist in after sales services

Requirements:

•⁠ ITE/ Diploma in IT/Engineering/Audio Visual
•⁠ Minimum 2 years of experience in System configuration, Testing & Commissioning for Audio Visual solution. Good to have:
•⁠ Experience in some of the products like Videowall, LED & LCD Display, Digital Sound Processor (DSP), Amplifier, Speaker, videoconferencing, Audio Visual Switches.
•⁠ Experience in similar renowned AV brands like Samsung, Crestron, Extron, BOSE, Ev, Poly, Cisco, Logitech, etc
•⁠ Experience in Crestron, Extron, AMX, Kramer automation programming will be an added advantage
•⁠ Experience in DSP programming will be an added advantage

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret that only shortlisted candidates will be notified.

Lee Tau Shen

Registration Number: R21109698

EA Licence No: 16C8004 (Elitez Pte Ltd)

• Position: HSE Officer/Engineer/Lead
• Location: Gul Road (company transport provided)
• Working hours: 5.5 days work week
• Salary (commensurate with experience): Up to $6,000 + Performance Bonus (Up to 6 months) + Flexi Benefits + OT pay (if required)
• Duration: Permanent
• Industry: Marine & Construction Engineering (Listed & MNC Company)

Main Responsibilities:

• Ensure provision of the Act and Regulations are complied with
• Promote safe conduct of work in the yard
• Liaise with WSHO or Safety Coordinator on the matter with regards to safety, health and welfare of people working in the yard
• Conduct Safety Induction Programme
• Ensure that appropriate personal protective equipment is used by the employees, contractors' workers and visitors
• Conduct inspection tours at worksite
• Report any unsafe conditions, equipment and housekeeping
• Apply permit to work system as required by the procedures and regulations
• Liaise with subcontractors’ safety supervisors with respect to safety of work undertaken by subcontractors
• Ensure that all records of safety equipment are in order and properly maintained
• Assist WSHO in the event of any incidents
• Any other ad-hoc duties assigned

Requirements:

• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only
• Minimum Diploma in Workplace Safety & Health/Engineering or related discipline
• Minimum 3-5 years of experience in marine shipyard operations
• Ensure compliance with all legal and regulatory requirements

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Job duties:

• Conducting performance testing for electrical systems & marine engines
• Troubleshooting and overhaul marine engines and generators
• Making sure all repair procedures are done based on the service manual
• Conducting on site & in house calibration
• Marine mechanic working experience before
• Ensuring safety number one
• Willing to work in marine engine room and offshore environment

AWS + Variable bonus

Good medical insurance and claim

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We are seeking a highly skilled and experienced Assistant Chief Engineer to join our dynamic team in Singapore. In this crucial role, you will work closely with the Chief Engineer to oversee and manage all technical operations related to our facilities, ensuring optimal performance, efficiency, and guest satisfaction.

• Assist in managing the day-to-day operations of the engineering department, including maintenance, repairs, and upgrades of all building systems and equipment
• Develop and implement preventive maintenance programs to ensure the longevity and efficiency of all facilities and equipment
• Collaborate with other departments to address technical issues and improve overall operational efficiency
• Oversee and coordinate the work of engineering staff and external contractors
• Assist in preparing and managing departmental budgets, including forecasting and cost control measures
• Ensure compliance with all relevant safety regulations, building codes, and environmental standards
• Implement energy-saving initiatives and sustainable practices to reduce environmental impact and operational costs
• Participate in emergency response planning and execution, including fire safety and natural disaster preparedness
• Contribute to long-term strategic planning for facility improvements and upgrades
• Provide technical guidance and training to engineering staff to enhance their skills and knowledge
• Assist in the selection and procurement of equipment, tools, and supplies for the engineering department

Job Description:

• Leads for Mechanical completion activities
• Inducts safe work practice and procedure
• Assigns tasks and manage the Mechanical completion team
• Organizes and coordinate FAT’s, EFAT with the vendors
• Coordinates and liaise with other discipline to expedite system handover and prioritize construction sequence
• Reviews and monitor Inspections and systems handover and make the job compliant to project specification
• Develops quantifiable benchmarks and everyone knows when the goal shall be achieved or completed (e.g. KPI)
• Demonstrates leadership in managing the subcontractor and immediate supervisor.
• Plans and control of day to day activities,coordinating with the subcontractor and discuss on the outstanding activities during the weekly progress meetings and arranging materials for the subcontractor to move with the job
• Bridges between the Commissioning team and Fabrication team and ensure the system handover is done as per commissioning requirements
• Coordinates with team members in the preparation of the Risk assessments / Method statement for the activities
• Communicates effectively regards of project expectations to team members
• Identifies and resolve issues and conflicts within the project team
• Manages preservation activities ,changes in project scope, identify potential crisis and devise contingency plans

Requirements:

• Bachelor’s degree in Engineering
• Minimum 10 years relevant experience in similar industry
• Proficient in MS office
• Able to work from heights and/or confined spaces

Job Description:

To plan, coordinate and execute pre-commissioning and commissioning activities, prepare mechanical completion checklists and coordinate with the related activities for entirety of mechanical completion and realization of commissioning.

• Reviews technical specifications, drawings, procurement and contract specifications and other relevant documents.
• Prepares mechanical completion checklists and assign to QA/QC Inspectors for completion.
• Liaises with Commercial Team and Vendor Coordinator for mechanical completion and commissioning supports from vendors and sub-contractors
• Monitors progress of mechanical completion for system readiness and assist mechanical completion work when necessary.
• Assist QA/QC Inspectors material verification check and incoming good receive when necessary.
• Liaises with Design Engineers for clarity of commissioning work scope.
• Under study system design and plan for commissioning.
• Assignment of System / Sub System Boundaries and checksheets for mechanical completion activities to facilitate site commissioning activities.
• Liaises with Design Engineers and vendors to develop commissioning procedures and submit for owner's approval.
• Liaises with owner, certifying authority, production and engineering departments on implementation and execution of commissioning procedures.
• Takes lead in commissioning preparation and work within discipline and support system commissioning of other disciplines.
• Provide commissioning assistance for vendors.
• Attend factory inspection, factory acceptance test and other related testing or compliance activities.
• Consolidates commissioning tests data and result for handover to owner.
• Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations.
• Ensure that Health, Safety & Environmental operating procedures are followed and counsel employees about compliance as necessary.
• Participate in the preparation of Safe work, Environmental control and Emergency procedures.
• Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed.
• Ensure that all Commissioning Permit To Work Procedure (CPTW) are followed.
• Any other associated tasks and responsibilities assigned from time to time.

Requirements:

• Degree in Mechanical, Marine and Naval Architecture Engineering with 5 years' experience in marine industry. Or diploma in Mechanical, Marine and Naval Architecture industry with at least 8 years' experience in marine industry.
• At least 5-8 years' experience in marine industry and familiar with various classification codes, regulations and be familiar with Mechanical Completion and Commissioning Procedures
• Be familiar with codes and standards such as IMO, ANSI/ASME/API, Norsok Class codes. Technical knowledge for working on mechanical/piping installation. Be familiar with marine piping system, mechanical structure and their operating principle. Practical experience on marine systems start-up and troubleshooting.
• Need to know about specifications, classification standards and computer literate. Able to utilize measuring instruments and understand measuring requirement and practice. Understand precedence and interfaces of vessel system.
• Be prepared to work on weekends, night shifts and go for sea trials, factory acceptance test and factory inspection.
• Initiative, analytical, responsible, leadership, spontaneous, good communication skills and result oriented.
• Must be physically fit.

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply
• Entry level / Junior / Senior / No experience welcome apply X 3 Opening
• Full training provided

Responsibilities:

§ Project execution and implementation activities for energy monitoring systems projects.

§ Co-ordinate site staff and plan site activities for ongoing and maintenance projects.

§ Record and maintain proper project documentation record

Requirements:

§ Diploma/Degree in Electrical/ Electronics/ Computer Engineering / Computer Science from a recognised Polytechnic/University

§ Preferably with experience in Energy Monitoring System

§ Our benefits and compensation for permanent position are as follows:

§

§ Salary for experience candidates will be considered based on the years of experience and our internal salary structure

§

§ 1 month AWS

§ Variable Bonus ranging from 1 to 6 months depending on individual and company performance

§ Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

§ Working days: Monday to Friday (1 day work from home per week)

§ Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

§ 18 days up to 21 days for executive (Engineer and above)

§ Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

§ Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

§ Term Life

§ Personal Accident

§ Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

§ Flex Dollars of $500 per financial year

§ Free annual year-end Health Check-Up

§ Monthly Birthday Party Celebration

§ Monthly Sports Activities

§ New Born Gift

§ CSR Initiatives

§ Department Bonding Activities

§ Biennial team building and staff appreciation dinner

§ Gym Corner for employees to exercise

§

§ Good Pay + Good allowance + Good Bonus

§ Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

§ Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )