Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Summary:

• Location : North
• 5 day, office hours
• MNC with good career progressions
• AWS + VB

Responsibilities:

• Support the design, development, configuration, and implementation of mechanical and electronic systems to enhance efficiency, improve yield, and strengthen EO capabilities, from concept to pilot stage.
• Recommend, procure, implement, and optimize mechanical and electronic components as needed.
• Provide timely assistance to OPs teams during process runs, transitioning from the pilot phase to production, and ensure solution documentation is created and maintained accurately.
• Involve in meetings with customers to understand their requirements for new projects.
• Research and develop innovative ideas and concepts to improve the company’s performance and competitiveness in industrial automation.
• Procure or assist in procuring necessary items to facilitate the execution of these duties.

Requirements:

• Diploma or Bachelor Degree in Mechanical Engineering
• Experience in setting up PLCs, single-board computers, or robotic/automated systems, especially in an industrial setting, is an advantage.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Salary: $3k - $5k

Location: AMK/ Yio Chu Kang/ Central

Job requirements:

- 2 to 3 years experience and above

- Requires BCA in BIM Cert

- All Mechanical must have experienced in ACMV & LTA/SMRT

Job descriptions:

● Develop and design mechanical systems (HVAC, plumbing, fire protection) in 3D using BIM software (Revit, AutoCAD, etc.).

● Prepare detailed mechanical design models, drawings, and specifications for commercial, residential, and industrial projects.

● Participate in design coordination meetings with

architects, MEP engineers, and contractors to resolve clashes and ensure efficient project execution.

● Utilize BIM coordination tools like Navisworks to detect clashes and implement clash resolution processes for mechanical systems.

● Produce and maintain detailed documentation, including BIM execution plans, as-built drawings, and equipment schedules.

● Perform quality control checks on mechanical systems designs and ensure accurate implementation of BIM models in the construction phases.

Able to start work within short notice will be highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Salary: $4.2k - $5k

Location: AMK / Yio Chu Kang / Central

Job Requirements:

● Min 5-8 years of relevant experience and above

● All Mechanical must have experienced in ACMV & LTA/SMRT

● Minimum Qualifications/ Experience/Skills

● Graduate in Mechanical Engineering.

● Advanced skills using company software

● Proven ability to communicate well in written and verbal communications

● Design thinking for product inventions and enhancements

● Motivation and commitment to providing interpersonal customer service

● Knowing and applying current industry standards and information

Job Descriptions:

● Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team.

● QA/QC documentation of engineering deliverables (DTS,MSS,RFI)

● Liaison with clients, project managers, architects, contractors

● Assist in resolving any technical problems faced during project design and/or construction stages

● Any other required duties as required by the Project Team.

Able to start work within short notice will be highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

As a Micron Singapore Construction Facilities Mechanical (Dry System) Engineer, you will be designing, operating, and troubleshooting various Semiconductor Mechanical Dry systems. Engineering assignments usually include equipment or systems design and development, equipment/material testing, preparation of specifications, process study, research investigations, report preparation, and other activities requiring a good knowledge of mechanical, electrical, control principles and techniques.

Roles & Responsibilities

• Design, operate and fix HVAC Systems; General, Solvent, Ammonia, and Acid Exhaust systems; House Vacuum Systems; Compressed Dry Air systems, Cleanroom and non-Cleanroom Make Up Air Systems, Structural, Civil, Test/Balance/Vibration; and Wafer Fab Process Tool Installations.
• Perform work, which involves conventional engineering practices including a variety of sophisticated features, such as conflicting design requirements, incompatibility of conventional materials, and difficult coordination requirements.
• Attend and participate in factory acceptance tests, (FAT), site acceptance tests (SAT) & equipment commissioning.
• Sustain operations, production personnel and construction trades to provide detailed designs and specifications for installing new capital equipment and systems.
• Conduct engineering and supervisory duties; coordinating outside consulting resources
• Assist in cost estimates and analysis for proposed projects; and providing support for starting up new equipment, which includes ensuring that all equipment connects with other mechanical and electrical systems seamlessly.
• Provide engineering services and review facilities work orders, maintain various administrative and engineering databases used for job tracking, engineering data, capital equipment facilitation, and critical system loads and capacities.
• Specify critical components for design projects and ensuring designs meet all applicable codes and rules.
• Provide code review and analysis using NFPA, FM, UBC, UFC, UMC, IBC, IMC, IFC, and NEC; perform research and development on emerging facilities and technologies to support innovative and groundbreaking semiconductor processes.
• Participate in mid to long-term infrastructure planning, ensuring facilities supports the overall company plan.
• Carry out all work in accordance with company safety guidelines
• Maintain good communication with the Mechanical Engineering organization, as well as other engineering teams and all customers throughout the organization.
• Collaborate with global facilities during the construction phase to ensure that lessons learnt are incorporated into the design where applicable.

Requirements:

• Education: Bachelor Degree in Mechanical Engineering or any related field is required.
• Experience: Minimum 3 years of experience in HVAC Systems; General, Solvent, Ammonia, and Acid Exhaust systems; House Vacuum Systems; Compressed Dry Air systems, Cleanroom and non-Cleanroom Make Up Air Systems, Structural, Civil, Test/Balance/Vibration; and Wafer Fab Process Tool Installations.
• Detailed understanding of Semiconductor Mechanical Dry systems.
• Proficiency in digital literacy including word processing, spreadsheet, and database packages.
• Good team work and organizational skills.
• Excellent problem-solving and communication skills.'
• Able to work on multiple tasks concurrently and prioritize and schedule workload.
• Experience in semiconductor industry or high-tech construction environments are preferred!

Working Location:

Woodlands, 1 North Coast Drive, F10N

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Job Description

• Prepare/Review spare parts list and equipment data inventory control and ensure critical spare availability
• Optimise spare parts and manage stock effectively by using CMMS TMQ-W.
• Ensure no down time due to unavailability of spare parts.
• Service used equipment’s and components and ensure ready to use all time.
• Analyse and improve equipment reliability of utilities & facilities to prevent recurrence with production group and contractors.
• Manage in-house contractors to execute maintenance timely and effectively.
• Develop and implement routine maintenance and inspection schedule for plant equipment’s and execute Preventive maintenance, Routine inspection and periodical inspection on Rotating and static equipment’s by co-ordinate with contractors at site.
• Manage annual shutdown maintenance related to facilities and management of actual site work, liaising with contractors and production group.
• Update long-term maintenance plan for facilities and utility equipment’s.
• It is a newly established 100% owned subsidiary international Parent company. To construct a new plant to produce solution-polymerized styrene-butadiene rubber (S-SBR) in Jurong Island.Ensure all maintenance activities comply with AKSS EHS policies.Will need to work on some weekend and outside office hours monthlyPlease find the attached job description for Maintenance Mechanical Engineer. We require 1 headcount for this position.Urgent Hire!.

Job Requirement

Requirements

1. Degree/Diploma in mechanical engineering or the equivalent
2. 3-5 years of experience in Plant & facilities in chemical plant.
3. Basic understanding of maintenance technology manufacturing process plant environment.
4. Demonstrated ability to adjust contractors independently and effectively.
5. Good interpersonal and communication skills
   

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Job Descriptions

• To render high quality sales/aftersales support to distributors and customers
• To provide advice and work on commissioning schedule and oversee building schedules of shipyards
• Assist factory on appraisals of engines and technical issues regarding engine performance
• Keep track of Distributor’s sales performance in ensuring expected sales budget is met
• Assist the development of sales activities of Distributors
• Provide support to distributors in the undertaking of projects, including technical support and provide updated information to department manager
• Provide full support in the preparation of sales seminar or any other sales or after-sales related activities or events including sales campaigns, promotions and programs for distributors and end-users
• Provide support to HQ on project co-ordination
• Oversee building schedules of shipyards and technical & commercial meetings with customers
• Provide advice on the commissioning schedule and oversee the entire process
• Any other duties assigned within the course of work

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: North
• Working days: Monday to Friday
• Working hours: 8am – 5pm

Job Responsibilities:

• Handle trouble shooting on products on site and identify any leaking or faulty installation of the components
• Provide site supervision on contractors for proper installation of the products
• Perform visual and functional checks on the products on site
• Present on improvement plans that generate pull through of product sales
• Work closely with Sales to promote on-site services contracts
• Provide both technical and market insight support to sales department for Oil & Gas market and mechanical packages
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s degree in Instrument / Mechanical engineering or strong science/technical discipline with at least 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

·    To follow up on a job from start till end of project from quotation to on site job till invoicing and service report
· To lead teams of technicians to follow through on projects

· To work independently to execute engine general repair and overhaul jobs on board/ at site.

· Knowledge on performing dismantling, repair, replacement and reassembling of mechanical parts

· To troubleshoot and advise repair proposals on breakdown and operation of the machinery

· Conduct daily tool box meetings with teams prior to job commencement and ensuring safe work practices at all times

· Ensure all repairs, maintenance & overhaul jobs are completed in a timely manner

· Delivering high quality service standard to customer's satisfaction.

· Preparing quotations for new enquiries, controlling cost of job within budget

· Prepare service reports post project completion

· Planning of job methodology and work schedule

· Liaising with customers to ensure smooth communication to complete a job

· Coordinate with local or overseas agents for job deployment and preparation

Requirements:

· Possess at least Diploma in Marine/Mechanical Engineering or Above

· Possess minimum 3 years experience in ship repair in Singapore

· Capable of liaison with customers and maintaining client relationship

· Good organization, planning and project management skills

· Highly organized person who can work with tight schedules to cater to the different arrival times of ships

· Must be willing to perform HANDS-ON work in mechanical repairs, installations and removal

· Able to provide technical assistance in all aspects of work

· Independent, resourceful, pro-active and team player

· Willing to work on site, on board vessels and in workshop with occasional irregular hours

· Passionate to work in the Marine Industry

· Good command of spoken and written English

Other info:

- Salary $3000 - $5000

-5-day work

-Near Gul Circle MRT station

Interested candidates, pls apply with your resume in MS Word.

You may email to [email protected]

EA License No: 17C8809

EA Reg No: R1108561

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Justine @ 9755 9161

Shortlisted candidates will be notified

Justine Lam Nyok Yuen

Reg No. R1218722

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Sustain equipment KPI and make continuous improvements to enhance performance with cost maintenance.
• Monitor and control equipment performance indices. Optimize PM procedures to make them more effective and efficient.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Coordinate new equipment start-up to support production, from facilities hook up, and vendor starts up, to acceptance of equipment for production.
• Monitor and analyze SPC, JMP for data collection.

Requirements:

• Degree in Mechanical / Mechatronics / E&E Engineering.
• Minimum 3 years of working experience in troubleshooting/maintenance of tools in Semiconductor industry.
• Proficient with SPC, FMEA, DOE, etc.
• Cleanroom experience.
• Good verbal and written communication skills and team player.

We regret that only shortlisted candidates will be notified.

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 20751

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

• ITE in Mechanical Engineering or equivalent
• Good technical Knowledge on Mechanical or Electrical and Instrumentation
• Hands-On experience on Pumps (Centrifugal, gear pumps, etc.) and Motors
• Customer service oriented
• Independent and proficient in basic writing skills
• Class 3 driving license is a plus
• Relevant working experience in pumps servicing/repair

Description of Responsibilities

• To carry out mechanical installation of Automated Materials Handling System (ASML) in cleanroom environment
• Ability to obey, follow, execute, and follow up on instructions by higher management, independently or as part of a team.
• Timely delivery of projects or tasks at hand
• Escalate and highlight any discrepancies, issues, or problems during job progress.
• Create, maintains, and signs off Proof of Delivery (POD) for submission to relevant departments.
• Able to put in compensated extra hours when requested and required due to the unforeseen work environment and schedule.

Key Performance Indicators (but not limited to)

• Timely delivery of projects or tasks at hand
• Punctuality
• Attendance

Career Prospects:

Candidates can aspire to take on leadership role in other areas of work within Build It department

Critical Skills/Knowledge:

• Effective Interpersonal and Communication Skills
• Air-con repairing / mechanic experience will be advantage

Education:

• O'Level and above

Other Considerations:

• Comfortable to work at heights and tight spaces

• Assist engineers in producing detailed and construction drawings.
• Min. 2-3 years of working experience in mechanical engineering field
• Design and drafting of mechanical arrangement, assembly and details
• Able to work under pressure and meet datelines
• AutoCAD skills and Microsoft Office
• Support the engineering manager on projects as required

Degree/Diploma in Mechanical Engineering or related fields

Must have minimum Two (5) year work experience in the servicing, maintenance and troubleshooting on the Sewage water network, pumping station and reclamation plant with ancillary system.

Responsibilities

· Manage & Lead engineering team

· Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations to as part of the engineering project team

· Team development

· QA/QC documentation review of engineering deliverables

· Liaison with clients, project managers, architects, contractors

· Resolve any technical problems faced during project design and/or construction stages

· Any other required duties as required by the Project Team.

· Candidate who has knowledge in the application of Bentley BIM models and project scheduling software Primavera P6 will be added as an advantage.

As a Mechanical Architect you will be the driving force for the development of high-tech, highly complex systems for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. Starting during the pre-concept phase, you act as a counterpart for the Project Manager within T&D for scoping the project and challenging our customer. While going through the different design phases, you will be the driving force who challenges the feasibility and cost-effectiveness of the proposed design solutions, bringing together the multidisciplinary team on a technical level while acting as a technical counterpart on system level with our customers.

Your responsibilities include:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer.
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of (mechanical) concepts.
• Definition Phase: develop Description of System Design Requirements and Specifications and discuss them with internal/external stakeholders.
• System Design Phase: generation of system design concepts and reviews:
• Develop well-considered choices, validated against system requirements
• Definition of high level modules and related technical interfaces
• Monitor that projects stay within agreed specifications.
• Make use of your creativity and helicopter view to find solutions in case of conflicts
• Detail Phase: supervise the creation of 3-D models and drawings, ensuring (sub)module interfaces meet their respective requirements.
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production.
• Production release: release the design for production.

Requirements:

• Master’s Degree or PhD in Mechanical or Mechatronic Engineering, preferably with a focus on construction / precision mechanics.
• At least 10 years of relevant working experience (semicon, precision mechanics, or similar).
• Extensive knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness.
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation.
• Experienced in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems in both the static and dynamic domain.
• User of 3D design tools (e.g. NX or SolidWorks).
• User of product lifecycle management systems (e.g. TeamCenter or EPDM).

Benefits:

• 14 days of annual leave per year. Prorated based on join date.
• Variable bonus.
• Meal allowance.
• Annual health screening.
• Dental reimbursement.
• Hospitalisation insurance.
• Specialist treatment coverage.
• Annual allocated training hours for each employee.

Responsibilities:

• To adhere to prevailing Company SOPs including service KPIs.
• To carry out indoor and outdoor service jobs (commission, repair, troubleshoot, inspection, modification, warranty checks).
• To investigate customer complaints (product defects, failures or non-conformance) and recommend solutions.
• To issue customer outdoor and indoor service reports.
• To disassemble cancelled units for stock return.
• To provide service and maintenance training sessions on product usage for customers.
• To perform routine maintenance and repair work on inverters and gear motors.
• To report discrepancies if any.

Requirements:

• ITE (Mechanical Engineering) with 1 year of relevant work experience.
• Basic proficiency in English (both written and spoken) is mandatory.

Work Conditions:

• Must be comfortable working outdoors in order to repair and service inverters and gear motors.
• Must be willing to be on standby for after office hours for service activiation, with OT payment.
• Must be willing to commute to clients' site for servicing. Transport reimbursement is provided for commute between the office and client sites.
• Work-at-height is required at some clients' sites.
• Must be open to occasional overseas work on adhoc activation basis.

• Support projects from the Mechanical Engineering/Design perspective of Buildings (Industrial/High-Tech, Data-Centre) from initial scoping through detailed design, commissioning, and final handover, including preparing technical specifications, reports, and cost estimates.
• Collaborate with respective departments to develop client proposals and tenders, aiming to achieve profitable business outcomes. This involves bid planning, facilitation, cost estimation, writing, technical input, and necessary approvals.
• Serve as a technical authority, providing mentorship and guidance to other electrical engineers in the team while ensuring technical excellence in all aspects of project execution.
• Foster strong client relationships by contributing to client plans and maintaining a positive rapport while supporting the development and motivation of team members and junior engineers.

Requirements

• Bachelor's Degree in Mechanical with a minimal of 3-10 years of prior functional experience with Engineering Consultants, Design Practices or Professional Services
• Buildings (Industrial/High-Tech, Data-Centre)
• Good knowledge of working drawings and construction practices
• Conversant with local codes & regulations
• Competency in authority requirements and submission procedures

Bayes provides career opportunities with reputable and progressive Employers and prioritizes the interests of all whom we represent. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

All personal data supplied will be treated in confidence, and as permitted by law. For further enquiries, please visit our website which shares our Privacy and Data Protection Policy.

Dickson KOH | Managing Partner
Head, Infrastructures Practice
EA Registration R1103367