Degree/Diploma in Mechanical Engineering or related fields

Must have minimum Two (5) year work experience in the servicing, maintenance and troubleshooting on the Sewage water network, pumping station and reclamation plant with ancillary system.

Responsibilities

· Manage & Lead engineering team

· Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations to as part of the engineering project team

· Team development

· QA/QC documentation review of engineering deliverables

· Liaison with clients, project managers, architects, contractors

· Resolve any technical problems faced during project design and/or construction stages

· Any other required duties as required by the Project Team.

· Candidate who has knowledge in the application of Bentley BIM models and project scheduling software Primavera P6 will be added as an advantage.

Job Description:

Create 3D solid model of components and/or assembly based on sketches or physical parts;

Provide mechanical engineering drafting support to project teams;

Modify and update mechanical engineering drawings.

Job Requirements:

Higher NITEC in Mechanical Engineering Drawing & Design or its equivalent;

Min 2 years' experiences in related field;

Proficient in modeling and creating fabrication drawings;

Proficient in drafting standards, ISO, ANSI Y 14.5;

Knowledge in Solid Edge modeling & drafting software will be an added advantage;

Knowledge in MS office application;

Able to work independently with minimum supervision.

NOTE: Open to Singaporeans only.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

ABOUT SEMBCORP INDUSTRIES

Manages the overall preparation of mechanical engineering designs, drawings, specifications, schedules, quantity and cost estimates for assigned projects.

For more information, please visit www.sembcorp.com.

Purpose and Scope:

The Senior Principal Mechanical Engineer plays a pivotal role; the PE has to be engaged when submission to the relevant authorities are required, such as getting a development control approval, as well as various permits to start construction works in a project.

Responsibilities

• Responsible for the checking and design of mechanical works from concept to detailed design and provision of QP supervisory works for projects
• Endorsement of the authorities’ submissions, supervision & apply for certificate of completion as Professional Engineer (Mechanical) for the projects undertaken by company.
• Conversant in local code and authority requirements, ensuring project compliance to the requirements.
• Able to perform analysis and guide engineers to analyze and provide technical advice and solutions when working with stakeholders
• Carry out project management, planning, financial management of project, contract administration, ensure key deadlines are met and team work together effectively
• Liaise with multiple stakeholders for civil & structure, architectural, mechanical and electrical works
• Preparation of tender documents and specifications
• Design management, coordination with contractors, subcontractors and external consultants
• Proactive communication, mentoring and guiding the reporting Engineers and Designers for learning and development
• Ensure the smooth completion of the project within schedule and budget
• Perform any other duties as assigned

Requirements

• Minimum degree in Mechanical Engineering, or equivalent
• Registered Professional Engineer with PEB Singapore/ Specialized Professional Engineer or
• More than 10 years in the industry
• Experience in both construction management and design
• Conversant in Engineering analysis design software, BIM software, CFD simulations tools and other mechanical/fire engineering software.
• Only Singaporean

At Sembcorp, our shared corporate behaviour underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses and functions.

Accountability – Hold team and self accountable to deliver on our commitments.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Design and develop high-precision semiconductor equipment to meet the processing and automation needs of customers.
• Understand the design specification given to you by the design lead.
• Understand the company’s design standards and best practices.
• Understand the constraints within which your design must work.
• Understand geometric tolerances and dimensional analyses.
• Choose components based on an understanding of function, reliability, and costs.
• Choose materials based on an understanding of materials science and engineering.
• Understand design for manufacturability/assembly.
• Work with the Electrical Engineer to choose drives and electrical components (if any).
• Discuss with the Software Engineer on any interlocking logic requirements.
• Lay the design concept down in the 3D CAD.
• Perform DFMEA during the design process.
• Submit the CAD module to the system integrator to check for interface issues.
• Review the design with the design lead.
• Put the part designs down on drawings, carefully specifying tolerances and specifications.
• Build the module BOM.
• Procure the module components.
• Review the assembly of the physical module.
• Perform design improvements where appropriate.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

Summary:

• Location : North
• 5 day, office hours
• MNC with good career progressions
• AWS + VB

Responsibilities:

• Support the design, development, configuration, and implementation of mechanical and electronic systems to enhance efficiency, improve yield, and strengthen EO capabilities, from concept to pilot stage.
• Recommend, procure, implement, and optimize mechanical and electronic components as needed.
• Provide timely assistance to OPs teams during process runs, transitioning from the pilot phase to production, and ensure solution documentation is created and maintained accurately.
• Involve in meetings with customers to understand their requirements for new projects.
• Research and develop innovative ideas and concepts to improve the company’s performance and competitiveness in industrial automation.
• Procure or assist in procuring necessary items to facilitate the execution of these duties.

Requirements:

• Diploma or Bachelor Degree in Mechanical Engineering
• Experience in setting up PLCs, single-board computers, or robotic/automated systems, especially in an industrial setting, is an advantage.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

• Growth Opportunities
• MNC
• 5 days work week

RESPONSIBILITIES:

· Plan and forecast project monthly and weekly installation schedules.
· Anticipate potential site issues and eliminate any risks.
· Liaise with site person-in-charge for work arrangement and manpower planning.
· Liaise with suppliers for delivery of materials and equipment by raising MERF (material- equipmentrequisition-form) for approval.
· Attend regular project meetings (such as site progress and co-ordination) with interested parties
including clients, architect, consultants, main contractor, and sub-contractors.
· Monitor, co-ordinate and direct the execution of work with site representatives and workers for
smooth workflow.
· Submit method statement, risk assessment and shop drawing.
· Submit progress report and progress claim.
· Ensure design of Mechanical & Electrical work meets with clients’ requirements.
· Perform pre-inspection of deliverable material and equipment, and after delivery inspection for any
defective goods.
· Inspect site installation work for quality and assurance.
· Conduct joint site inspection with client’s representatives.
· Conduct pre-testing and commissioning activities.
· Clearance of defects and outstanding works.
· Prepare as-built drawings for joint inspection with clients’ representatives.
· Prepare Operation & Maintenance manuals for client’s acceptance.
· Assist in the settlement of project final account including variation orders.

Simply submit your application with your updated Resume in MS Word Format to Shubhi Dugar (EA Personnel Reg. No.: R21100680) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Shubhi, at 6590 9968 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Purpose and Scope

You will provide mechanical maintenance works to support the operations of the Energy from Waste plant.

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualification, Skills and Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry
• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Job Descriptions

• To render high quality sales/aftersales support to distributors and customers
• To provide advice and work on commissioning schedule and oversee building schedules of shipyards
• Assist factory on appraisals of engines and technical issues regarding engine performance
• Keep track of Distributor’s sales performance in ensuring expected sales budget is met
• Assist the development of sales activities of Distributors
• Provide support to distributors in the undertaking of projects, including technical support and provide updated information to department manager
• Provide full support in the preparation of sales seminar or any other sales or after-sales related activities or events including sales campaigns, promotions and programs for distributors and end-users
• Provide support to HQ on project co-ordination
• Oversee building schedules of shipyards and technical & commercial meetings with customers
• Provide advice on the commissioning schedule and oversee the entire process
• Any other duties assigned within the course of work

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: North
• Working days: Monday to Friday
• Working hours: 8am – 5pm

Job Responsibilities:

• Handle trouble shooting on products on site and identify any leaking or faulty installation of the components
• Provide site supervision on contractors for proper installation of the products
• Perform visual and functional checks on the products on site
• Present on improvement plans that generate pull through of product sales
• Work closely with Sales to promote on-site services contracts
• Provide both technical and market insight support to sales department for Oil & Gas market and mechanical packages
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s degree in Instrument / Mechanical engineering or strong science/technical discipline with at least 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Salary: $3k - $5k

Location: AMK/ Yio Chu Kang/ Central

Job requirements:

- 2 to 3 years experience and above

- Requires BCA in BIM Cert

- All Mechanical must have experienced in ACMV & LTA/SMRT

Job descriptions:

● Develop and design mechanical systems (HVAC, plumbing, fire protection) in 3D using BIM software (Revit, AutoCAD, etc.).

● Prepare detailed mechanical design models, drawings, and specifications for commercial, residential, and industrial projects.

● Participate in design coordination meetings with

architects, MEP engineers, and contractors to resolve clashes and ensure efficient project execution.

● Utilize BIM coordination tools like Navisworks to detect clashes and implement clash resolution processes for mechanical systems.

● Produce and maintain detailed documentation, including BIM execution plans, as-built drawings, and equipment schedules.

● Perform quality control checks on mechanical systems designs and ensure accurate implementation of BIM models in the construction phases.

Able to start work within short notice will be highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Salary: $4.2k - $5k

Location: AMK / Yio Chu Kang / Central

Job Requirements:

● Min 5-8 years of relevant experience and above

● All Mechanical must have experienced in ACMV & LTA/SMRT

● Minimum Qualifications/ Experience/Skills

● Graduate in Mechanical Engineering.

● Advanced skills using company software

● Proven ability to communicate well in written and verbal communications

● Design thinking for product inventions and enhancements

● Motivation and commitment to providing interpersonal customer service

● Knowing and applying current industry standards and information

Job Descriptions:

● Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team.

● QA/QC documentation of engineering deliverables (DTS,MSS,RFI)

● Liaison with clients, project managers, architects, contractors

● Assist in resolving any technical problems faced during project design and/or construction stages

● Any other required duties as required by the Project Team.

Able to start work within short notice will be highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

• Assist engineers in producing detailed and construction drawings.
• Min. 2-3 years of working experience in mechanical engineering field
• Design and drafting of mechanical arrangement, assembly and details
• Able to work under pressure and meet datelines
• AutoCAD skills and Microsoft Office
• Support the engineering manager on projects as required

Benefits:

• 14 days of annual leave per year. Prorated based on join date.
• Variable bonus.
• Meal allowance.
• Annual health screening.
• Dental reimbursement.
• Hospitalisation insurance.
• Specialist treatment coverage.
• Annual allocated training hours for each employee.

Responsibilities:

• To adhere to prevailing Company SOPs including service KPIs.
• To carry out indoor and outdoor service jobs (commission, repair, troubleshoot, inspection, modification, warranty checks).
• To investigate customer complaints (product defects, failures or non-conformance) and recommend solutions.
• To issue customer outdoor and indoor service reports.
• To disassemble cancelled units for stock return.
• To provide service and maintenance training sessions on product usage for customers.
• To perform routine maintenance and repair work on inverters and gear motors.
• To report discrepancies if any.

Requirements:

• ITE (Mechanical Engineering) with 1 year of relevant work experience.
• Basic proficiency in English (both written and spoken) is mandatory.

Work Conditions:

• Must be comfortable working outdoors in order to repair and service inverters and gear motors.
• Must be willing to be on standby for after office hours for service activiation, with OT payment.
• Must be willing to commute to clients' site for servicing. Transport reimbursement is provided for commute between the office and client sites.
• Work-at-height is required at some clients' sites.
• Must be open to occasional overseas work on adhoc activation basis.

Description of Responsibilities

• To carry out mechanical installation of Automated Materials Handling System (ASML) in cleanroom environment
• Ability to obey, follow, execute, and follow up on instructions by higher management, independently or as part of a team.
• Timely delivery of projects or tasks at hand
• Escalate and highlight any discrepancies, issues, or problems during job progress.
• Create, maintains, and signs off Proof of Delivery (POD) for submission to relevant departments.
• Able to put in compensated extra hours when requested and required due to the unforeseen work environment and schedule.

Key Performance Indicators (but not limited to)

• Timely delivery of projects or tasks at hand
• Punctuality
• Attendance

Career Prospects:

Candidates can aspire to take on leadership role in other areas of work within Build It department

Critical Skills/Knowledge:

• Effective Interpersonal and Communication Skills
• Air-con repairing / mechanic experience will be advantage

Education:

• O'Level and above

Other Considerations:

• Comfortable to work at heights and tight spaces

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B