Job Objectives

To perform effective component maintenance which includes inspection, operational test, repair, and modification (where required) of aircraft components.

Primary Responsibilities

• Perform the full range of repair duties on assigned components under the general supervision of the immediate superior
• Perform repair/overhaul/modification of components according to the requirements specified by relevant approved data
• Perform scheduled/unscheduled maintenance on aircraft components in accordance with manufacturer and other directives
• Perform troubleshooting, testing and operational checks on aircraft components
• Participate in product audit exercises (where/when necessary) to ensure that Satair’s practice/repair overhaul procedure is 100% aligned with the OEM requirement
• Collaborate (where/when necessary) with Customer Service, the OEM and Satair’s management to resolve issues concerning aircraft systems modifications and repairs
• Perform requisition of materials necessary for the jobs in accordance to specified procedures
• Receive training in specific core and secondary skills to enable multi-skill level work to be performed
• Carry out good housekeeping practices and observe all Health and Safety procedures

Secondary Requirements

• Participate in production planning exercises
• Participate in cross training efforts - technical training including recurrent training to other technicians
• Participate in HIRA (Hazard Identification and Risk Assessment) exercises as and when required
• Participate in new capability study and new capability set-up as and when requested to do so
• Participate in continuous improvement projects related to the workshop, specifically in the areas of test/repair engineering and other business processes at large
• Comply with Satair Group’s mission, values and Quality Management procedures
• Comply with Satair Group’s guidelines on Ethics & Compliance
• Understanding, sharing and living of Satair Group values and rules
• Respect Satair Group processes and procedures agreed per function
• Keep the direct report informed of the status of agreed tasks and of any critical problem areas
• Participate in optimizing Satair Group’s business procedures by applying existing Satair Group’s IT systems
• Comment/advise on unsatisfactory situations within the organization, and propose potential solutions for improvements
• Identify and offer suggestions to improve efficiency
• Be well informed about and familiar with the latest developments in Satair Group's business
• Have an inter-cultural understanding
• Participate in occupational safety and health efforts
• Contribute towards a positive and inspiring working environment

Job Requirements

• Minimum 3 years of relevant work experience
• Mechanical fundamental
• Working knowledge of English, both oral and in writing
• Computer literate - ability to learn new programs and understand all basic computer functions
• Preferred Knowledge of tools for SAP, email and databases
• Preferrred CAAS Air Legislation examination paper. Any of the following: M10, L11, L12 or CO1
• Preferred CAAS Paper B11 OR CAAS SAR-66 Papers CO2 and TM1
• Maintain relations across functions and with all stakeholders
• Ability to work in an international context
• Results and task focused
• Motivated and cooperative
• Proactive and flexible
• Attention to detail
• Ability to work under pressure
• Service orientated
• Inter-cultural understanding
  Attitude supportive of Satair values

Technician Duties

• Inspect, maintain and repair
• Diagnose faults and carry out repairs
• Install new systems and components
• Perform tests on components and systems
• Conduct routine maintenance and servicing
• Troubleshoot and diagnose faults
• Comply with health and safety regulations

Requirements

• Able to carry out maintenance and repair on hydraulic systems
• Experience in using hand and power tools
• Experience in diagnosing faults and repairing hydraulic systems
• Ability to read and interpret hydraulic diagrams
• Ability to work as part of a team

Responsibilities:

• Manage and deliver projects ensuring quality, cost, and timeline requirements are met.
• Liaise with clients, internal management, subcontractors, service providers and suppliers to ensure contractual deliverables are met.
• Oversee project budget, schedule, and team, including engineers, QS, supervisors, WSH Coordinator, and subcontractors.
• Conduct site visits, monitor progress, and resolve issues with contingency plans.

Requirements:

• Diploma in Mechanical/Electrical Engineering or it's equivalent
• 5 years of experience in ACMV projects, with strong knowledge of air-conditioning/chiller systems.
• Ability to work independently, manage project documentation, and lead testing/commissioning.

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to submit your application or send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

We are seeking skilled Mechanical Fitters to join our team in delivering high-quality services for Power Plant and Oil & Gas projects. The role involves the assembly, installation, maintenance, and repair of mechanical equipment, ensuring compliance with industry standards and Singapore MOM safety regulations. The ideal candidate will have technical expertise, attention to detail, and a strong commitment to safety and quality.

Key Responsibilities:

1. Installation & Assembly:

- Assemble, install, and align mechanical components such as pumps, turbines, heat exchangers, piping systems, and structural supports.

- Read and interpret blueprints, technical drawings, and manuals to ensure precise work execution.

2. Maintenance & Repairs:

- Conduct preventive and corrective maintenance on mechanical systems and equipment.

- Diagnose mechanical issues and carry out repairs, including replacing worn- out or damaged components.

3. Inspection & Testing:

- Perform equipment inspections to identify potential issues and ensure compliance with safety and performance standards.

- Conduct functional tests and pressure tests to validate equipment integrity.

4. Safety &Compliance:

- Adhere to workplace safety protocols and MOM regulations, including the proper use of PPE.

- Participate in toolbox meetings, hazard assessments, and emergency drills.

5. Documentation:

- Maintain accurate logs and reports of maintenance, repair activities, and inspection findings.

- Provide feedback on equipment performance to supervisors and technical teams.

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Supervise and ensure that mechanical work activities are performed in a safe and timely manner while adhering to specifications and codes
• Responsible for organising mechanical works, delegating tasks and managing workers on site
• Assist the Mechanical Engineers in planning and monitoring of construction work progress.
• Any other duties to be assigned from time to time

Prerequisites:

• Minimum 3 years' relevant work experience in construction industry
• Knowledge of static and rotating equipment and/or Steam or Gas Turbines
• Ability to manage and handle workers
• Possess a strong commitment to workplace safety

Working Hours: Mon-Fri 8.30am-6pm

Working Location: Mandai Estate (15mins bus ride from Kranji MRT)

Job Description:

This role involves ensuring the efficiency, safety and compliance of heating, ventilation, air conditioning (HVAC) systems, plumbing, fire protection systems, elevators and other mechanical infrastructure.

• Plan, manage, inspect, compile service reports for routine maintenance for M&E systems
• Prepare quotation via schedule of rates for any repairs or new works
• Attend to fault calls for emergency/ critical M&E systems
• Provide support in project works
• Attend meetings as arranged by superior
• Required to make frequent site visits to government sites (this is not a desk bound job)

Requirements:

• Min Nitec in Mechanical Engineering
• Only those with relevant experience may apply
• We seek Mandarin-speaking candidates who are required to serve Mandarin-speaking clients.

To Apply:

Please attach your resume with the following information:

• Reason for leaving last/ current employment
• Last drawn salary
• Expected salary
• Notice period

(We regret that only shortlisted candidates will be notified)

Key Responsibilities:

1. Perform maintenance, troubleshooting, and servicing for diesel engines, alternators, and related systems using precision tools.
2. Install and wire electrical components, including sensors, transmitters, and control panels, adhering to schematics (training provided if necessary).
3. Overhaul critical engine components such as oil pumps, water pumps, and cylinder heads, ensuring optimal performance.
4. Align and install systems like radiators, alternators, gearboxes, and piping, maintaining high precision and quality.
5. Conduct generator safety and load tests, diagnose issues using diagnostic tools, and document key parameters.
6. Apply knowledge of hydraulic systems, alternators, and control panels to optimize equipment functionality.
7. Provide general servicing for engines and alternators, contributing to efficient system operations.

What We’re Looking For:

• Qualifications: ITE or equivalent in a related field.
• Experience: 3-5 years of hands-on experience in heavy-duty diesel, automobile mechanics, or marine systems.
• Skills: Proficiency in hydraulic systems, alternator operations, and mechanical alignments.
• Bonus Skills: Exposure to IT-based diagnostics and programmable logic controls.
• Training: Apprenticeship or formal training with a reputable engine-related organization is highly valued.

What’s In It for You?

• Work on exciting marine and heavy-duty machinery projects.
• Opportunities for professional development in diagnostics and advanced mechanical systems.
• A supportive team environment with competitive compensation.

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Larry Loh Yi Song
Registration Number: R23115969
AlwaysHired Pte Ltd
EA Licence No: 24C2293

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

M&E Technical Manager (Electrical/ Mechanical)

• Working Day: 5Day | Mon – Fri 8.30am – 6pm
• Location: Ang Mo Kio
• Salary: $6,000 - $9,000

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical & Electrical services.
• Good knowledge in M&E works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Job scope

• Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

Karen Lee Kai En Reg No: R22108159

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Description:

• Understand read of 3D drawing of equipment, piping system and pipe support
• Familiar with equipment layout drawing, detailed piping drawing and isometric drawing.
• Co-ordinate with process, civil & structural, electrical & instrumentation team, to understand the elevation & structural requirements.
• Develop MSRA for mechanical, piping construction works.
• Manage and supervisor workforce for construction works.
• Prepare the material list depicting all the materials, sizes, specification, special requirements, testing requirements to meet the design. This document shall be used as an input for procurement team.
• Review the documents & drawings of vendor supplied equipment, valves, and skids to verify the piping requirements are meet.
• Perform site inspection at vendor manufacturing unit to qualify & check vendor can supply the bulk requirement on demand.
• Assist project & engineering team for modification requirement during construction. Prepare as-built drawings after completion of construction and documents, as necessary.

Requirements:

• Degree in Mechanical Engineering,
• Minimum 3 year’s relevant experience in piping construction and developing process piping system.
• Good knowledge of GA drawings, ISO drawings,
• Knowledge & experience to work in oil & gas plant, chemical plant,
• Able to provide quick and effective technical solutions, to suit requirements at all stage of the project

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

M&E Technical Manager (Electrical/ Mechanical)

• Working Day: 5 Days | Mon – Fri 8.30am – 6pm
• Location: Ang Mo Kio, Singapore
• Salary: S$ 6,000 - 9,000 + Bonus
• Singapore M&E Service Providers

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical & Electrical services.
• Good knowledge in M&E works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Job scope

• Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Product area

The Data Center team designs and operates some of the most sophisticated electrical and HVAC systems in the world. We are a diverse, upbeat, creative, team-oriented group of engineers committed to building and operating powerful data centers.

Job description

The Data Center team designs and operates some of the most sophisticated electrical engineering, mechanical engineering and HVAC systems in the world. Facilities Technicians at Google data centers operate, monitor and support physical facilities conditions. Some of these duties will include heating and cooling of air and water, power supply, generators, UPS systems, electrical distribution and control and monitoring systems. You regularly help inspect, maintain and repair various data center systems such as piping and non-critical electrical or mechanical system components).

As an advocate for best practices, you develop creative approaches to reducing operational costs while improving overall data center efficiency. You ensure that environmental and safety standards are consistently met, identifying problems and making repairs quickly. In emergency situations or abnormal conditions, you manage data center performance issues and outages to minimize the recovery time from failures.

Additional job description

As a Facilities Technician, you will operate, monitor, and support physical facilities conditions for our data centers.

Qualifications

Job responsibilities

• Be responsible for the uptime, maintenance, and troubleshooting of water pumps and treatment systems, Heating Ventilating and Air Conditioning (HVAC), and Control and Monitoring Systems.
• Operate, monitor, maintain, and respond to abnormal conditions in the data center facilities systems and equipment. Provide tracking and trending operational characteristics.
• Support startup, commissioning, and integration of new equipment and systems into facilities infrastructure. Direct the execution of starting-up, commissioning, documentation, and full facilities turnover on assigned projects.
• Provide operational and maintenance insights into the design review process.
• Produce standards and templates for global control/monitoring system analysis, diagnostic, preventive maintenance, and trend logs for data center critical facilities systems.

Minimum qualifications

• Associate's degree, trade school certification, or other certified training in a related technical field, or equivalent practical experience.
• 5 years of experience in operating and maintaining mission critical facilities (data centers, hospitals, pharma, refineries, power plants, industrial, etc.).
• Commissioning experience of HVAC and mechanical distribution systems (chillers, air handling units, etc.) to include air and water side systems.

Preferred qualifications

• Experience with maintenance on mechanical or Mechanical, Electric and Plumbing (MEP) systems, and capable of independently resolving common system failures.
• Experience with operations in a data center and troubleshooting for mechanical/HVAC systems.
• Ability to work with varying outdoor temperature conditions, perform material handling (lifting/shifting) and work on platforms, ladders, and under raised floors.
• Ability to learn quickly and address issues as they arise during normal operations or during emergency conditions.
• Ability to work non-standard 12 hour shifts including weekends and holidays on-call rotation.

Employment Type: Full-time

About Us:
WF2 is a leading sub-contractor specializing in high-quality P&S infrastructure and building projects. We are committed to delivering excellence and seeking talented professionals to join our dynamic team.

Position Overview:
We are looking for an experienced Mechanical Drafter cum Quantity Surveyor (Plumbing & Sanitary) to join our team. This individual will be responsible for preparing detailed plumbing and sanitary system designs and drafts while managing project quantities, cost estimates, and budget monitoring. The ideal candidate will have a solid background in mechanical drafting, with a specific focus on plumbing and sanitary systems, along with strong skills in quantity surveying.

Key Responsibilities:

• Prepare detailed mechanical plumbing and sanitary system drawings using CAD software.
• Develop and review detailed plumbing and sanitary system layouts and specifications.
• Perform quantity take-offs, cost estimation, and budgeting for plumbing and sanitary works.
• Prepare and maintain accurate records of materials, labor, and associated costs for plumbing projects.
• Collaborate with project managers to ensure designs align with project requirements.
• Assist in reviewing contracts and tender submissions for plumbing and sanitary systems.
• Ensure compliance with local codes, regulations, and company standards.
• Monitor and track project progress, adjusting designs or estimates as needed.
• Provide support during the construction phase, including site visits and addressing technical queries.

Qualifications & Skills:

• Diploma or degree in Mechanical Engineering, Drafting, Quantity Surveying, or related field.
• Proven experience (1 years) as a Mechanical Drafter with a focus on plumbing and sanitary systems.
• Strong knowledge of plumbing codes, standards, and regulations.
• Proficiency in AutoCAD, Revit, and other relevant drafting software.
• Experience in cost estimation, quantity take-offs, and budget management for plumbing systems.
• Excellent communication, organizational, and time-management skills.
• Ability to work both independently and as part of a team.
• Detail-oriented and able to handle multiple projects simultaneously.
• Knowledge of building codes and safety regulations related to plumbing and sanitary systems.

Preferred Qualifications:

• Experience working with large-scale construction projects.
• Certification in Quantity Surveying.
• Familiarity with CAD and other technical skills required.

Job Description:

• Collaborate with consultants to manage and coordinate M&E design works for MRT projects.
• Oversee and develop CCSM and M&E designs in consultation with LTA, SWCs, and relevant authorities.
• Review specifications, ensure compliance with terms and conditions, interpret drawings, obtain budget approvals, and manage related documentation.
• Plan and technically coordinate the installation of M&E services.
• Supervise and work closely with consultants, sub-contractors, and site operations teams to ensure smooth on-site installation processes.
• Liaise with relevant authorities to secure design approvals and work permits.
• Coordinate sub-contractors' M&E activities, monitor schedules, and ensure high-quality deliverables throughout the project.
• Ensure compliance with construction procedures and safety standards, guaranteeing quality workmanship that meets stringent requirements during site tests and inspections.

Job Requirements:

• Bachelor's Degree in Mechanical or Electrical Engineering or a related field.
• Minimum of 10 years of relevant experience, including supervision of at least two LTA MRT underground projects of similar scale and complexity.
• Proficiency in BIM software and AutoCAD is highly advantageous.
• Experience in drafting tender specifications is preferred.
• Strong communication, analytical, and writing skills.

Interested applicants please click apply now!

Hey Rocket Pte. Ltd. (EA 21C0816)
Tan Zi Jian (R23116456)

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740