Our client delivers a broad array of solutions and services, featuring IBMS, Smart Facility Management, IoT and Data Analytics, ELV Systems, as well as Network Infrastructure and ICT solutions.

• Perform testing of DCS/DDC/PLC with SCADA software.
• Conduct the communication test for Devices using different protocol.
• Arrange and submit documents and report as per the requirement.
• Ensure timely completion of commissioning activities.

Requirements:

• Diploma in Electrical Engineering or equivalent
• At least 2 years of experience in Industrial/Process automation, building ACMV systems for Built Environment Projects.
• Experience in building management systems will be advantageous.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected].

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a global provider of intelligent automation and integrated security management solutions.

• Responsible in project management, implementation and maintenance services of security system, including system design, system configuration and coordination works.
• Work closely with other departments, including design, procurement, and installation teams.
• Verify that engineering tasks are aligned with the overall project timeline and objectives.

Requirements:

• Diploma in Electrical Engineering or equivalent
• At least 2 years of Security System Installation experience.
• Knowledge in Computer/Network/Security/ELV/Electrical System.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Report to QPS and QP (Geo) on all design matters
• Ensure that the contractor's design are in compliance with LTA's specifications and requirements
• Assist to check on the design calculations
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractor’s design teams to ensure prompt resolution of all design-related issues arising from the reviews of the Temporary and Permanent Works.

Responsibilities:

• The Senior Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognised by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on projects similar in nature to vehicular tunnel, including at least five (5)years in the design of geotechnical works for deep excavation

Stand in rate to be discussed during interview.

RF Unit

• Disassemble RF unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Network Analyzer
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation
• Knowledge of Smith Chart

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

About our client: Our client is a leading global engineering and project management consultancy embarking on large-scale infrastructure and environmental projects.

*Please note that this role will be hired on a long-term contract to support our client's project.

*Work Location: West

*Salary Range: $4,800 - $6,000

About the role:

· Carry out site supervision duties by the Building Control Act.

· Ensure works are done appropriately following the approved drawings.

· Assist the Resident Engineer on all site and/or construction-related matters.

About you:

· Minimum Diploma in Mechanical Engineering or equivalent.

· Registered with IES as Resident Technical Officer (M&E).

· Minimum 10 years of construction experience in supervising mechanical works.

· A person with good communication skills and with ability to work in a team.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Process Associate Engineer (Die Prep) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in semiconductor and/or electronics manufacturing industry are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machine related to production
• Process monitoring via SPC / real time monitoring system
• Work on process improvement projects
• Handle disposition and on hold lots
• Maintain good housekeeping in the production area
• Support in recipe setup and qualification for production
• Assist to troubleshoot process-related issue
• Collect engineering data
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum diploma in electrical / mechatronics / mechanical/ microelectronics engineering or similar discipline
• Minimum 2 years’ experience working in semiconductor manufacturing environment
• Minimum 2 years of experience working in Die Preparation process such as Backgrind, Dicing and Laser-grooving.
• Knowledge in basic SPC and Microsoft Office
• Flexible to work under various shift pattern. The selected candidate will start with office hours first, and eventually work on 12-hour rotating shift (day and night)

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Our client is a global provider of intelligent automation and integrated security management solutions.

• Oversee and manage facilities, security projects, and maintenance from concept to completion.
• Work with cross-functional teams to gather requirements and design tailored solutions.
• Establish a maintenance regime for facilities to ensure minimal downtime.
• Ensure projects are completed on time, within budget, and meet the highest quality standards.

Requirements:

• Diploma in Electrical & Electronics Engineering/Instrumentation Control or equivalent.
• Minimum 2 years of hands-on project execution experience in ELV and CCTV.
• Good understanding of Electrical Control.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design. To be cost-effective, the whole outturn cost of the design solution must be considered, including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall have Excellent knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff.
• The candidate shall assist in ensuring a safe working environment for all staff.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The candidate shall have at least 8 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind, with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

A start-up IT and application company is seeking an experienced Full Stack Engineer, a versatile software developer skilled in both front-end and back-end application development.

Here's a brief overview of what the job entails:

1. Remote work, responsible for the entire process of project architecture design and functional module development, with the ability to break down tasks based on project requirements.

2. Participate in system development planning, code writing, code review, requirement analysis, defect tracking, and quality control activities.

3. Participate in backend API development; familiarity with Java microservice architecture is required.

4. Continuously optimize code quality to enhance system performance and stability.

5. Proficient in mobile front-end technologies and familiar with front-end framework design.

6. Supporting in system maintenance (training provided by colleagues based in China)

7. Trademark and Intellectual Property (IP) application

8. Proactively communicate, identify, and resolve system issues.

9. Have a certain understanding of industry knowledge and focus on user experience.

Job Requirements:

1. Bachelor's degree or above in Computer Science, Software Engineering, Electronics and Information, or related fields.

2. Over 3 years of experience in system development, proficient in using Java, Spring, MySQL, and Vue (or Bootstrap).

3. Proficient in Java and object-oriented design principles, with a solid understanding of JVM fundamentals.

4. Skilled in commonly used front-end technologies, including HTML/CSS/JavaScript/Node.js, and experience with mainstream development frameworks like React or Vue.js.

5. Familiar with commonly used databases such as MySQL, with proficiency in SQL for database queries and basic database operations.

6. Ability to work independently and complete relevant development tasks.

7. Speak in Mandarin, familiarity with WeChat for information exchange, and English for translation work are essential. You will be expected to communicate and work closely with colleagues based in China.

Situated in the heart of Singapore's Central Business District, Rakuten Asia Pte. Ltd. is Rakuten's Asia Regional headquarters. Established in August 2012 as part of Rakuten's global expansion strategy, Rakuten Asia comprises various businesses that provide essential value-added services to Rakuten's global ecosystem. Through advertisement product development, product strategy, and data management, among others, Rakuten Asia is strengthening Rakuten Group's core competencies to take the lead in an increasingly digitalized world.

Rakuten Group, Inc. is a global leader in internet services that empower individuals, communities, businesses, and society. Founded in Tokyo in 1997 as an online marketplace, Rakuten has expanded to offer services in e-commerce, fintech, digital content, and communications to approximately 1.7 billion members around the world. The Rakuten Group has nearly 32,000 employees and operations in 30 countries and regions. For more information visit https://global.rakuten.com/corp/

Department overview

Search Department focuses on Search, Discovery, and Navigation experience for users of Rakuten. We design, develop, and deploy high performance, fault-tolerant distributed systems used by millions of Rakuten customers every day. We strive to deliver the most innovative solutions that are helpful to people and societies around the world.

Why we hire

We are looking for a backend software engineer to work on next generation AI native experience. In this role, you will be at the forefront of development, and implementation of cutting-edge techniques for LLM solutions including prompt engineering, model fine-tuning, evaluation, and inference capabilities.

Position Details

• Explore and implement the most recent technologies and approaches for AI native user experience and build innovative products on top of LLM platform.
• Work closely with cross-functional teams to implement projects harnessing LLMs for diverse purposes and vertical domains.
• Design and develop a high-performance platform capable of handling and processing large volumes of requests efficiently.

Qualification

• BS degree in Computer Science, Computer Engineering, or other relevant majors with minimum 3-5 years of experience
• Extensive experience in programming, included but not limited to, the following programming languages: Java, Golang and C++
• Excellent problem-analysis and -solving skills, have industry experience in building backend services for large-scale distributed system
• Good team communication and collaboration skills.
• Strong execution skills and have a problem-solving mindset.

Preferred Qualifications

• Maintain a deep passion for contributing to the success of LLM is essential in this innovative and fast-paced team environment.
• Experience in serving Deep Learning models on framework TensorFlow, PyTorch, XGBoost etc.
• Familiar with LLM’s and supporting tools such as LangChain (Optional)

Rakuten is an equal opportunities employer and welcomes applications regardless of sex, marital status, ethnic origin, sexual orientation, religious belief or age.

Responsibilities:

• Lead the site supervision team on all the Civil and Structural and Building Construction works.
• Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.
• Address and respond to all Contractor’s RFI’s and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.
• Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

Qualifications:

• Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.
• Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.
• Registered with IES as Resident Engineer (Civil).
• A person with good communication and leadership skills.

The Role:

This position involves the preparation of technical specifications, construction drawings, and design documents for instrumentation and control systems in process and industrial plants. The role requires coordinating with multiple teams to ensure project delivery within established schedules and budget constraints.

Key Responsibilities:

• Lead the design efforts for field instrumentation and control systems, including the preparation and review of design documents.
• Manage small to medium-sized projects, ensuring adherence to allocated man-hours, costs, and timelines.
• Draft and review specifications, technical bid evaluations (TBE), and vendor documentation for instrumentation, analyzers, and control systems (DCS, ESD, F&G).
• Develop construction-related drawings, such as IO lists, location layouts, hook-up diagrams, and cable routing plans.
• Select and evaluate appropriate instruments for process control and monitoring applications.
• Estimate billable man-hours (BMBQ) and contribute to technical proposal development for tenders.
• Compile monthly project reports, participate in client meetings, and ensure alignment with project milestones.
• Collaborate with project teams and oversee the daily task assignments for team members.
• Perform factory acceptance testing (FAT), site acceptance testing (SAT), loop checks, and provide support during commissioning.
• Support field activities during construction, pre-commissioning, and commissioning phases.

The Requirements:

• Bachelor’s degree in Chemical Engineering, Electrical Engineering, or Instrument and Control Engineering.
• At least 15 years of experience in instrument and control system design, with a strong foundation in field instrumentation engineering and control systems such as DCS, ESD, and F&G.
• Hands-on experience with construction support, including FAT, SAT, and loop checks.
• Proficiency in the development of construction drawings and project documentation.
• Strong communication skills and ability to work effectively across teams.

Interested applicants are encouraged to submit their detailed resumes.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Our client is a global provider of intelligent automation and integrated security management solutions.

• Assist the project team with documentation, report drafting, and coordinating project tasks.
• Participate in the system design, technical development, and implementation phases.

Requirements:

• ITE in Electrical or equivalent
• Minimum 3 years of experience in Security System Installation.
• Good understanding in computer, network, security, ELV and electrical system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Perform pre- and post-sales technical support to customers.
• Provide support to the sales staff in technical presentations.
• Evaluate and establish a vision system performance specification.

Requirements:

• Diploma in any Engineering field
• At least 2 years of experience in field servicing and semiconductor industry.
• Able to troubleshoot electronics hardware system, PC hardware, OS and networking.
• Good understanding in Die Sorter or Wafer Sorter

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductir/LCD/Electronics/Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Overview / Responsibilities

The Facilities Cost Benchmark is responsible for developing a comprehensive construction cost and management to achieve long-term Micron goals.

The role will be managing and supporting Micron construction projects cost from planning through closeout, including scoping, pre-planning, design, construction administration, Facilities budget cost benchmark management with different Micron site.

Responsibility includes budget cost managing & improving of new project planning business process. Gathering, analyzing & benchmarking Micron current manufacturing sites & construction projects, providing accurate & timely information to project evaluation team. Facilities Cost Benchmark also has another important responsibility is to evaluate the global semiconductor factory construction cost comparison.

Responsibilities

• Manage and lead new construction project cost process.
• Establishing project objectives, scope and deliverables in collaboration with stakeholders and ensuring alignment with requirements.
• Prepare new project Cost & schedule report & long-term plan reports for management review.
• Developing and managing initial project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Maintain effective communication with project team members and relative stakeholders to provide project updates, address concerns and foster strong working relationships.
• Ensure Roles, Responsibilities and Accountabilities are fully understood by the participated teams
• Collect, classify, evaluate data and information used in supporting the new Micron construction project planning evaluation request.
• To evaluate the global semiconductor factory construction cost comparison.

Skills / Qualifications

Minimum Qualifications:

• The candidate should possess a BSc or Beng in Engineering from a recognized institute of higher learning.
• Experience in Master planning & project planning is thus highly valued.
• Candidates with experience in facilities operation & construction.
• Minimum 5 years of budget and cost management experience.
• Good analytical skills with problem solving aptitude.
• Skills in excel and simple code writing desired.
• Ability to integrate and work in a global multicultural team
• Great leadership, interpersonal skills and team building spirit.
• Excellent communication skills, both written and verbal.

Minimum Experience & Skills:

• Candidates with experience in Fab or facilities construction and operations.
• Demonstrable experience in the construction or semiconductor project cost management and/or other relevant industries is strongly preferred.
• Strong financial understanding and experience in project budgeting and cost control.
• Strong communication skills, as well as the ability to visualize issues and communicate them to others.
• Outstanding organization, coordination and leadership skills – ability to coordinate and motivate TMs from multiple sites and different background.
• Ability to work collaboratively and pro-actively in a team environment.
• Moderate skill in excel and simple code writing desired.
• Effective delegation skills.
• Experience in managing large-scale construction projects.
• Language: Chinese, English. Japanese would be preferred.

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Your Team, Your Impact

The role is part of our Test Operations and plays a critical role in supporting Product and Test Engineers with test development, product qualification, and manufacturing release. Additionally, it involves collaboration with production and planning teams to optimize spare capacity for revenue generation. The position encompasses the management of Marvell’s test equipment, including testers, handlers, probers, and related hardware, with an emphasis on ensuring operational readiness and driving continuous improvement.

What You Can Expect

• Collaborate with product & test engineers and external vendors to install, configure, buyoff and operate testers, handlers, change kits, probers and hardware items to support NPI Test development projects.
• Own and drive equipment installations, buyoff & operational readiness.
• Develop procedures and documentation for tools handling, setup, conversions to achieve high up time & low operational cost.
• Guide technicians on schematic interpretations, board level troubleshooting and bench setups.
• Work with vendors for tool maintenance, upgrade, repair & calibration works as necessary.
• Review and maintain key spares to achieve high levels of equipment & HW uptime.
• Generate periodic management updates on equipment installation & asset utilization metrics.

What We're Looking For

• BS in EE/ME with minimum 7 years of experience in handling ATEs, Auto Handlers, Change kits, Wafer Probers and associated hardwares.
• System knowledge with hands-on experience in UltraFLEX & Advantest 93K testers.
• Solid understanding in correlations, calibration, golden unit test, preventive maintenance & production release processes.
• Experience in driving root cause analysis and CA/PA to achieve high equipment uptime & stability.
• Work in rotating shifts (day or night schedules) to support project teams across the globe.
• Self-starter, fast learner, good communicator, able to work in matrix organization, juggle multiple tasks.
• Knowledge in ESD controls, GRR, 5S, TPM, OEE, 8D, ISO-9K, MS-Office tools.
• Hands on experience in setup, troubleshoot & running of Hon Precision, Epson and Cohu handlers preferred.

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.