Engineers are required to provide design and engineering supports to stakeholders on railway, road tunnel and bus infrastructures, carry out technical studies and investigations, technological researches, etc., and the following responsibilities:
• Upkeeping engineering standards, design criteria, performance specifications and technical requirements for air-conditioning and mechanical ventilation systems, fire protection systems, plumbing, sanitary and water services, tunnel ventilation system, lifts and escalators, etc.
• Preparation and evaluation of tenders, review of design submissions by consultants and contractors, site supervision, testing and commissioning, etc.

Requirements:
• Knowledge in Mechanical Engineering
• Senior Engineer: At least 5 years of experience in the design and supervision of mechanical systems/services stated in the above job description.
• Executive Engineer: At least 2 years of experience in the design and supervision of mechanical system/service stated in the above job description.
• Those without experience are also welcome to apply
• Good communication, interpersonal and leadership skills

1. To perform troubleshooting of Live plant MCC, other electrical panels, lighting systems, and various process instruments

related to Jurong Island - Chemical plant.

2. To support and oversee vendor-installed new MCCs/LV boards as per the design and ensure safe commissioning

assistance as per protocol.

3. To do regular Preventive maintenance for of above.

4. Sound knowledge of area classifications related to the process industry and ensuring equipment inspection, and

verifications are in order

5. To do works, servicing of valves and actuators

6. To upkeep the spare part list and consumable list

7. To key in manhour in the CMM system

8. To upkeep the maintenance records and perform maintenance activity assigned by the supervisor 9. To perform electrical

LOTO for site activities.

10..To perform minor cable laying, termination, and glanding of E&I equipment.

11. Assist mechanical technicians with any emergency troubleshooting related to E&I works.

12. To provide support for E&I fitter for tray works and tubing, and related installation works(small panels, lights JB, etc)

13. Previous experience in turn-key / green field / gray field E & I construction experience is mandatory

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

ABOUT SEMBCORP INDUSTRIES

Manages the overall preparation of mechanical engineering designs, drawings, specifications, schedules, quantity and cost estimates for assigned projects.

For more information, please visit www.sembcorp.com.

Purpose and Scope:

The Senior Principal Mechanical Engineer plays a pivotal role; the PE has to be engaged when submission to the relevant authorities are required, such as getting a development control approval, as well as various permits to start construction works in a project.

Responsibilities

• Responsible for the checking and design of mechanical works from concept to detailed design and provision of QP supervisory works for projects
• Endorsement of the authorities’ submissions, supervision & apply for certificate of completion as Professional Engineer (Mechanical) for the projects undertaken by company.
• Conversant in local code and authority requirements, ensuring project compliance to the requirements.
• Able to perform analysis and guide engineers to analyze and provide technical advice and solutions when working with stakeholders
• Carry out project management, planning, financial management of project, contract administration, ensure key deadlines are met and team work together effectively
• Liaise with multiple stakeholders for civil & structure, architectural, mechanical and electrical works
• Preparation of tender documents and specifications
• Design management, coordination with contractors, subcontractors and external consultants
• Proactive communication, mentoring and guiding the reporting Engineers and Designers for learning and development
• Ensure the smooth completion of the project within schedule and budget
• Perform any other duties as assigned

Requirements

• Minimum degree in Mechanical Engineering, or equivalent
• Registered Professional Engineer with PEB Singapore/ Specialized Professional Engineer or
• More than 10 years in the industry
• Experience in both construction management and design
• Conversant in Engineering analysis design software, BIM software, CFD simulations tools and other mechanical/fire engineering software.
• Only Singaporean

At Sembcorp, our shared corporate behaviour underpin all the work that we do in building a sustainable future:

Institution-first Mindset – Put the interest of the Group ahead of individual interests.

Collaboration – Deliver through collaborating across markets, businesses and functions.

Accountability – Hold team and self accountable to deliver on our commitments.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: North-East

Job Description:

• Design and develop high-precision semiconductor equipment to meet the processing and automation needs of customers.
• Understand the design specification given to you by the design lead.
• Understand the company’s design standards and best practices.
• Understand the constraints within which your design must work.
• Understand geometric tolerances and dimensional analyses.
• Choose components based on an understanding of function, reliability, and costs.
• Choose materials based on an understanding of materials science and engineering.
• Understand design for manufacturability/assembly.
• Work with the Electrical Engineer to choose drives and electrical components (if any).
• Discuss with the Software Engineer on any interlocking logic requirements.
• Lay the design concept down in the 3D CAD.
• Perform DFMEA during the design process.
• Submit the CAD module to the system integrator to check for interface issues.
• Review the design with the design lead.
• Put the part designs down on drawings, carefully specifying tolerances and specifications.
• Build the module BOM.
• Procure the module components.
• Review the assembly of the physical module.
• Perform design improvements where appropriate.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

• Growth Opportunities
• MNC
• 5 days work week

RESPONSIBILITIES:

· Plan and forecast project monthly and weekly installation schedules.
· Anticipate potential site issues and eliminate any risks.
· Liaise with site person-in-charge for work arrangement and manpower planning.
· Liaise with suppliers for delivery of materials and equipment by raising MERF (material- equipmentrequisition-form) for approval.
· Attend regular project meetings (such as site progress and co-ordination) with interested parties
including clients, architect, consultants, main contractor, and sub-contractors.
· Monitor, co-ordinate and direct the execution of work with site representatives and workers for
smooth workflow.
· Submit method statement, risk assessment and shop drawing.
· Submit progress report and progress claim.
· Ensure design of Mechanical & Electrical work meets with clients’ requirements.
· Perform pre-inspection of deliverable material and equipment, and after delivery inspection for any
defective goods.
· Inspect site installation work for quality and assurance.
· Conduct joint site inspection with client’s representatives.
· Conduct pre-testing and commissioning activities.
· Clearance of defects and outstanding works.
· Prepare as-built drawings for joint inspection with clients’ representatives.
· Prepare Operation & Maintenance manuals for client’s acceptance.
· Assist in the settlement of project final account including variation orders.

Simply submit your application with your updated Resume in MS Word Format to Shubhi Dugar (EA Personnel Reg. No.: R21100680) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Shubhi, at 6590 9968 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Purpose and Scope

You will provide mechanical maintenance works to support the operations of the Energy from Waste plant.

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualification, Skills and Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry
• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Sustain equipment KPI and make continuous improvements to enhance performance with cost maintenance.
• Monitor and control equipment performance indices. Optimize PM procedures to make them more effective and efficient.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Coordinate new equipment start-up to support production, from facilities hook up, and vendor starts up, to acceptance of equipment for production.
• Monitor and analyze SPC, JMP for data collection.

Requirements:

• Degree in Mechanical / Mechatronics / E&E Engineering.
• Minimum 3 years of working experience in troubleshooting/maintenance of tools in Semiconductor industry.
• Proficient with SPC, FMEA, DOE, etc.
• Cleanroom experience.
• Good verbal and written communication skills and team player.

We regret that only shortlisted candidates will be notified.

To apply, please click "Apply Now" or visit www.gmprecruit.com and search for job reference: 20751

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

·    To follow up on a job from start till end of project from quotation to on site job till invoicing and service report
· To lead teams of technicians to follow through on projects

· To work independently to execute engine general repair and overhaul jobs on board/ at site.

· Knowledge on performing dismantling, repair, replacement and reassembling of mechanical parts

· To troubleshoot and advise repair proposals on breakdown and operation of the machinery

· Conduct daily tool box meetings with teams prior to job commencement and ensuring safe work practices at all times

· Ensure all repairs, maintenance & overhaul jobs are completed in a timely manner

· Delivering high quality service standard to customer's satisfaction.

· Preparing quotations for new enquiries, controlling cost of job within budget

· Prepare service reports post project completion

· Planning of job methodology and work schedule

· Liaising with customers to ensure smooth communication to complete a job

· Coordinate with local or overseas agents for job deployment and preparation

Requirements:

· Possess at least Diploma in Marine/Mechanical Engineering or Above

· Possess minimum 3 years experience in ship repair in Singapore

· Capable of liaison with customers and maintaining client relationship

· Good organization, planning and project management skills

· Highly organized person who can work with tight schedules to cater to the different arrival times of ships

· Must be willing to perform HANDS-ON work in mechanical repairs, installations and removal

· Able to provide technical assistance in all aspects of work

· Independent, resourceful, pro-active and team player

· Willing to work on site, on board vessels and in workshop with occasional irregular hours

· Passionate to work in the Marine Industry

· Good command of spoken and written English

Other info:

- Salary $3000 - $5000

-5-day work

-Near Gul Circle MRT station

Interested candidates, pls apply with your resume in MS Word.

You may email to [email protected]

EA License No: 17C8809

EA Reg No: R1108561

Company's Profile

Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Prepare, qualify, and ship machines from the factory to global customers, with occasional on-site service support.

Requirements

• Proficient in mechanical and electrical control systems.
• Knowledge in machinery automation (electrical, servo, sensor, pneumatic systems) and adept at reading mechanical drawings and using measurement tools.
• I/O check and troubleshooting, knowledge in mechanical alignment, motor tuning, vision systems

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Justine @ 9755 9161

Shortlisted candidates will be notified

Justine Lam Nyok Yuen

Reg No. R1218722

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Summary:

DxD Hub is an end-to-end productisation partner, committed to transforming the MedTech landscape in Singapore through innovative solutions sourced from both local and regional partners. Our strengths are in cross-disciplinary product development particularly in molecular diagnostics, protein immune assays, and digital diagnostic technologies. We are seeking a skilled and experienced Mechanical Design Engineer to join our dynamic team. The successful candidate will take on the responsibility of leading a team in the design and development of mechanical systems. The candidate will work closely with cross-functional teams to lead projects, conducting feasibility studies and overseeing product development. They will also ensure that designs comply with both technical specifications and regulatory standards.

Job Roles and Responsibilities:

• Conceptualise, design, and develop mechanical components and mechanisms for medical devices.
• Responsible for the preparation and maintaining design documentation such as specifications, bill of materials, test protocols, test reports, etc.
• Lead a team to perform structural analysis, thermal analysis, and other relevant tests to validate and optimise designs.
• Responsible for feasibility tests to assess the viability and performance of proposed designs.
• Work closely with cross-functional teams, including teams in molecular diagnostics, protein immune assays, and digital diagnostic technologies as well as electrical engineers, software engineers, and project managers.
• Ensure compliance with DxD Hub Quality Management system, standards, and regulatory requirements such as FDA, ISO13485, etc.

Job Requirements:

• Master’s or bachelor’s degree in mechanical engineering, or related field.
• At least 5 years relevant experience in mechanical design engineering and completed one full product development cycle.
• Three years of experience or equivalent in close and collaborative work with design managers and product managers.
• Experiences in leading a mechanical design team is a plus.
• Proficient in CAD software, such as SolidWorks, AutoCAD, etc.
• Strong understanding of engineering principles, materials, and manufacturing processes.
• Excellent problem-solving and analytical skills.
• Effective communication skills and ability to work collaboratively in a team.
• Knowledge in quality, product verification test, QMS, and ISO13485 would be an advantage.
• Self-driven team player who can work in a fast-paced environment.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Description

• Prepare/Review spare parts list and equipment data inventory control and ensure critical spare availability
• Optimise spare parts and manage stock effectively by using CMMS TMQ-W.
• Ensure no down time due to unavailability of spare parts.
• Service used equipment’s and components and ensure ready to use all time.
• Analyse and improve equipment reliability of utilities & facilities to prevent recurrence with production group and contractors.
• Manage in-house contractors to execute maintenance timely and effectively.
• Develop and implement routine maintenance and inspection schedule for plant equipment’s and execute Preventive maintenance, Routine inspection and periodical inspection on Rotating and static equipment’s by co-ordinate with contractors at site.
• Manage annual shutdown maintenance related to facilities and management of actual site work, liaising with contractors and production group.
• Update long-term maintenance plan for facilities and utility equipment’s.
• It is a newly established 100% owned subsidiary international Parent company. To construct a new plant to produce solution-polymerized styrene-butadiene rubber (S-SBR) in Jurong Island.Ensure all maintenance activities comply with AKSS EHS policies.Will need to work on some weekend and outside office hours monthlyPlease find the attached job description for Maintenance Mechanical Engineer. We require 1 headcount for this position.Urgent Hire!.

Job Requirement

Requirements

1. Degree/Diploma in mechanical engineering or the equivalent
2. 3-5 years of experience in Plant & facilities in chemical plant.
3. Basic understanding of maintenance technology manufacturing process plant environment.
4. Demonstrated ability to adjust contractors independently and effectively.
5. Good interpersonal and communication skills
   

Job Descriptions

• To render high quality sales/aftersales support to distributors and customers
• To provide advice and work on commissioning schedule and oversee building schedules of shipyards
• Assist factory on appraisals of engines and technical issues regarding engine performance
• Keep track of Distributor’s sales performance in ensuring expected sales budget is met
• Assist the development of sales activities of Distributors
• Provide support to distributors in the undertaking of projects, including technical support and provide updated information to department manager
• Provide full support in the preparation of sales seminar or any other sales or after-sales related activities or events including sales campaigns, promotions and programs for distributors and end-users
• Provide support to HQ on project co-ordination
• Oversee building schedules of shipyards and technical & commercial meetings with customers
• Provide advice on the commissioning schedule and oversee the entire process
• Any other duties assigned within the course of work

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Salary: $3k - $5k

Location: AMK/ Yio Chu Kang/ Central

Job requirements:

- 2 to 3 years experience and above

- Requires BCA in BIM Cert

- All Mechanical must have experienced in ACMV & LTA/SMRT

Job descriptions:

● Develop and design mechanical systems (HVAC, plumbing, fire protection) in 3D using BIM software (Revit, AutoCAD, etc.).

● Prepare detailed mechanical design models, drawings, and specifications for commercial, residential, and industrial projects.

● Participate in design coordination meetings with

architects, MEP engineers, and contractors to resolve clashes and ensure efficient project execution.

● Utilize BIM coordination tools like Navisworks to detect clashes and implement clash resolution processes for mechanical systems.

● Produce and maintain detailed documentation, including BIM execution plans, as-built drawings, and equipment schedules.

● Perform quality control checks on mechanical systems designs and ensure accurate implementation of BIM models in the construction phases.

Able to start work within short notice will be highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Salary: $4.2k - $5k

Location: AMK / Yio Chu Kang / Central

Job Requirements:

● Min 5-8 years of relevant experience and above

● All Mechanical must have experienced in ACMV & LTA/SMRT

● Minimum Qualifications/ Experience/Skills

● Graduate in Mechanical Engineering.

● Advanced skills using company software

● Proven ability to communicate well in written and verbal communications

● Design thinking for product inventions and enhancements

● Motivation and commitment to providing interpersonal customer service

● Knowing and applying current industry standards and information

Job Descriptions:

● Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team.

● QA/QC documentation of engineering deliverables (DTS,MSS,RFI)

● Liaison with clients, project managers, architects, contractors

● Assist in resolving any technical problems faced during project design and/or construction stages

● Any other required duties as required by the Project Team.

Able to start work within short notice will be highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

As a Micron Singapore Construction Facilities Mechanical (Dry System) Engineer, you will be designing, operating, and troubleshooting various Semiconductor Mechanical Dry systems. Engineering assignments usually include equipment or systems design and development, equipment/material testing, preparation of specifications, process study, research investigations, report preparation, and other activities requiring a good knowledge of mechanical, electrical, control principles and techniques.

Roles & Responsibilities

• Design, operate and fix HVAC Systems; General, Solvent, Ammonia, and Acid Exhaust systems; House Vacuum Systems; Compressed Dry Air systems, Cleanroom and non-Cleanroom Make Up Air Systems, Structural, Civil, Test/Balance/Vibration; and Wafer Fab Process Tool Installations.
• Perform work, which involves conventional engineering practices including a variety of sophisticated features, such as conflicting design requirements, incompatibility of conventional materials, and difficult coordination requirements.
• Attend and participate in factory acceptance tests, (FAT), site acceptance tests (SAT) & equipment commissioning.
• Sustain operations, production personnel and construction trades to provide detailed designs and specifications for installing new capital equipment and systems.
• Conduct engineering and supervisory duties; coordinating outside consulting resources
• Assist in cost estimates and analysis for proposed projects; and providing support for starting up new equipment, which includes ensuring that all equipment connects with other mechanical and electrical systems seamlessly.
• Provide engineering services and review facilities work orders, maintain various administrative and engineering databases used for job tracking, engineering data, capital equipment facilitation, and critical system loads and capacities.
• Specify critical components for design projects and ensuring designs meet all applicable codes and rules.
• Provide code review and analysis using NFPA, FM, UBC, UFC, UMC, IBC, IMC, IFC, and NEC; perform research and development on emerging facilities and technologies to support innovative and groundbreaking semiconductor processes.
• Participate in mid to long-term infrastructure planning, ensuring facilities supports the overall company plan.
• Carry out all work in accordance with company safety guidelines
• Maintain good communication with the Mechanical Engineering organization, as well as other engineering teams and all customers throughout the organization.
• Collaborate with global facilities during the construction phase to ensure that lessons learnt are incorporated into the design where applicable.

Requirements:

• Education: Bachelor Degree in Mechanical Engineering or any related field is required.
• Experience: Minimum 3 years of experience in HVAC Systems; General, Solvent, Ammonia, and Acid Exhaust systems; House Vacuum Systems; Compressed Dry Air systems, Cleanroom and non-Cleanroom Make Up Air Systems, Structural, Civil, Test/Balance/Vibration; and Wafer Fab Process Tool Installations.
• Detailed understanding of Semiconductor Mechanical Dry systems.
• Proficiency in digital literacy including word processing, spreadsheet, and database packages.
• Good team work and organizational skills.
• Excellent problem-solving and communication skills.'
• Able to work on multiple tasks concurrently and prioritize and schedule workload.
• Experience in semiconductor industry or high-tech construction environments are preferred!

Working Location:

Woodlands, 1 North Coast Drive, F10N

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

• ITE in Mechanical Engineering or equivalent
• Good technical Knowledge on Mechanical or Electrical and Instrumentation
• Hands-On experience on Pumps (Centrifugal, gear pumps, etc.) and Motors
• Customer service oriented
• Independent and proficient in basic writing skills
• Class 3 driving license is a plus
• Relevant working experience in pumps servicing/repair