Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

Job Description & Requirements

Job Responsiblities:

• Collect daily job notifications from the Board’s officers at the start of each work day.
• Carry out site survey at customer’s premises in advance of actual meter fixing/removal/replacement works to assess site conditions (for example, no obstruction to meters, valves on water mains are as per plans).
• Site survey before meter fixing/removal/replacement job, supervision of contractor’s work
• Check and record initial readings on new meters and final readings on old meters, including photographic records
• Service Includes taking records of works in progress/completed, ensuring work procedures and safety measures are carried out as specified, reporting any incident promptly, maintaining close contact with PUB officers, managing and tracking the movement of meters including related fittings, supervision of metering works as directed and in accordance with daily check sheets.
• Carrying out site visit to check on the meter condition, interviewing customers to establish the facts, taking additional meter readings on site for analysis.

Job Requirements:

• Diploma in any engineering field.
• Must have own transportation

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description:

• Oversee post-sales activities Cybersecurity products.
• Participate in large-scale project implementations at both local and regional levels.
• Provide on-site implementation services, including testing, deployment, and documentation.
• Offer technical support to ensure customer satisfaction.
• Analyze and address customer queries by troubleshooting and consulting existing knowledgebase articles and known issues.
• Be available for 24x7 maintenance support calls on a routine standby basis.
• Any other ad hoc duties as assigned by supervisor.

Requirements:

• Candidates with no prior relevant experience are also encouraged to apply
• Bachelor’s Degree or Diploma in Cyber Security, Computer Science, Computer Engineering, or a related field.
• 1-3 years of relevant experience in IT, particularly in network support and administration.
• Knowledge and experience in networking, including routing and switching technologies.
• Capable of working independently as well as part of a team.
• Willing to work diligently and eager to learn about new technologies.
• Strong analytical and troubleshooting abilities.

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Our client is a global MNC in Industrial Waste Management industry. They are looking for a Mechanical Maintenance Supervisor for the next phase of their business. They are located in West.

Duties Mechanical Maintenance Supervisor:

• Collaborate with the commissioning team to inspect, test, and repair equipment as needed.
• Support maintenance work planning and scheduling alongside the engineer.
• Assign and track individual tasks, ensuring timely and high-quality completion.
• Maintain adequate inventory of tools, supplies, and parts for effective equipment repairs.
• Perform mechanical fitting tasks, including alignment, grinding and cutting.
• Servicing, repairing, and overhauling equipment such as pumps and blowers when required.

Requirements

• Diploma in Mechanical Engineering or related field
• Min 3 - 5 years’ maintenance experience in similar industries such as Water Treament, Chemical and Oil & Gas

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.
EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

• Ensure the timely completion of assembly builds and tests in compliance with specified requirements, drawings, and work instructions.
• Assist with gas panel assembly, encompassing the initial stages of pallet assembly, leak testing, and integration, as well as the final stages of functional testing and final quality control inspection.
• Maintain cleanliness and adhere to manufacturing discipline and cleanroom protocols.

Requirements:

• Nitec in Mechanical/ Mechatronics Engineering
• At least 2 years of experience in Manufacturing/Semiconductor industry.
• Able to understand schematic and mechanical drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description:

• Assist Managers in Mechanical engineering projects of various sizes and complexity
• Assist Managers in analyze customer design proposals and specifications to determine cost effective solutions
• Ensure professional quality services in all facets of work
• Assist Managers in leading a project team to ensure technical accuracy of project deliverables
• Assist Managers in leading manage a team to ensure cost effective, safe and timely completion of projects to meet or exceed client expectations
• Manage project activities throughout lifecycle, including the allocation of adequate resources, documentation and other factors necessary for success
• Work with clients to deliver the end project
• Prepare and review specification and concept reports
• Maintain and grow current business and client relationships
• Provide mentoring to technical staff, assigning duties as required
• Provide quality and cost control during the design and construction process
• Maintain project schedules and project cost summaries to track work progress, budget status, and manpower resource utilization.
• Escalate and identify the need for additional services and fees.
• Assist with Shop drawing reviews as required

Job Requirements:

• Min Degree in Civil Engineering relevant discipline
• Min 5 - 8 years experience working in the relevant industry
• Prior ACMV ( Air-conditioning and Mechanical ventilation ) experience will be advantageous

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Summary Benefit :

✅ Friendly working environment

✅ Good Benefits

✅ 5 days

✅ Career Progression

Key Responsibilities:

• Create and modify detailed 2D/3D drawings using AutoCAD and BIM software.
• Develop accurate layouts, plans, and technical drawings for projects.
• Collaborate with engineers and architects to ensure design accuracy.
• Maintain and update project documentation and drawings.
• Follow project specifications, standards, and guidelines.
• Assist in clash detection and resolution using BIM tools.
• Coordinate with project teams to meet deadlines and quality standards.
• Generate as-built drawings and ensure proper archiving of project files.

Requirement:

• Diploma or certification in Drafting, CAD, or related fields.
• Proficiency in AutoCAD, Revit, and other BIM tools.
• 2+ years of experience in drafting or BIM modeling.
• Strong attention to detail and ability to interpret technical drawings.
• Familiarity with industry standards and practices.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Lee Cheng Yin (Gina) (R22104523)

EA License No: 20C0358

Facility Technician

• Monthly Salary: $2,000
• Working Location: Tanjong Pagar
• Working Days & Hours: 6 Days (7am-3pm / 3-11pm / 11pm-7am) rotate

Job Description

• Perform all repair and maintenance works on the Hotel's lighting, power heating, ventilation, air-conditioning, refrigeration, fire protection, kitchen, laundry and plumbing equipment.
• Check system or equipment for faults and follow up on the repair works if required.
• Monitor works carryout by contractors and ensure works are properly done, safe and secured.
• Carry out preventive maintenance work of properties.
• Ensure the fire and safety procedures are carried out at all times.

Job Requirements

• NITEC in Electrical / Mechanical or equivalent
• Able to work rotating shifts including weekends and public holidays

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

about the company

Our client is a leading global leader in medical R&D. They have operations globally across Taiwan, Europe, China, Korea etc. and they’re now on a look out for a R&D manager to join their dynamic team during an exciting time in their development.

What you will be here for

• R&D design of medical products
• Developing and evaluating new materials, structures (including frame profiles) and product designs
• Drive quality improvement in the mechanical aspect
• Build-up and conduct mechanical simulations and modelling
• Plan, coordinate and execute product enhancements
• Manage all stages of the product lifecycle, including conceptual design, prototyping, testing,validation, and transition to manufacturing
• Oversee the design, analysis, and development of complex mechanical systems

What you will need

• Phd / Msc / Degree in Mechanical / Mechatronics Engineering
• Min 15 years of experience in R&D mechanical design - medical devices / instrumentation / consumer electronics background with 7 years in a leadership role
• Competed at least 2 full new product lifecycle
• Expertise in Finite Element Modelling and Analysis
• Experience in modeling/simulation software is a must (SolidWorks, ANSYS).
• Knowledge of statistical data analysis methods and DOE
• Familiar with Product Reliability Test Design / Failure Analysis / Documentation will be a plus

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg
Please include your availability, expected salary and reason for leaving current job
We regret that only shortlisted candidates will be contacted
EA: 94C3609 / Reg: R1325913

M&E Technical Manager (Electrical/ Mechanical)

• Working Day: 5Day | Mon – Fri 8.30am – 6pm
• Location: Ang Mo Kio
• Salary: $6,000 - $9,000

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical & Electrical services.
• Good knowledge in M&E works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for M&E services is preferred

Job scope

• Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Job Description:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer.
• To successfully complete New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects.
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality.
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ).
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes.
• To update the status of on-going programs to the management.
• To consistently pursue for new customers.
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline.

Requirements:

• Degree or diploma in mechanical engineering/precision engineering.
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed.
• Proficient in Microsoft Office suite of programs.
• Good verbal and written communication and presentation skills.
• Strong leadership to lead, guide and inspire the project team to produce quality work and stay committed to all deliverables.
• Business oriented, meticulous, and cost sensitive.
• Ability to analyse, solve problems and decision making.
• Strong organisational skills with a can-do attitude to always improve and initiate new ways of working to achieve results.

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Jobscope:

• Participate actively in EHSS activities (E.g., H&S Training, Concern Reporting, Safety Risk Assessment (SRA) Review, correction of EHS hazards and unsafe conditions).
• Maintain housekeeping in work area and ensure compliance of site safety regulations to prevent accidents.
• Ensure compliance of company EHS & Security policies & local EHS Legislations.
• Support Mechanical and/or Electrical Team in service and repair works when necessary.
• Perform scheduled preventive and predictive maintenance on equipment.
• Perform complex troubleshooting and repair equipment, redesign and improve the equipment for better capability and performance.
• Involve in improvement projects implementation and liaise with vendors/contractors on scope of work.
• Participate in Root Cause Failure Analysis and ensure action follow-up to prevent recurrence of breakdowns.
• Conduct on-the-job training and assessment for new technicians and complete all required certification forms as and when required by the company.
• Prepare SOP, OJT, SRA, Troubleshooting Know-How and other training materials when needed.
• Identify opportunity and drive continuous improvements in cost saving, quality and yield
• Carry out equipment inspection.
• Execute Reliability Index Tasks.

Requirements:

• Min. NITEC, Higher NITEC, or Technical certificate in Electrical or Mechanical Engineering or equivalent.
• Preferably with min. 3 years’ relevant work experience in hands on maintenance experience in chemical industry.
• Hands on experience in E & I, production line design and commissioning would be an advantage.
• Good knowledge in pneumatic, hydraulic and other control systems and understanding in operations of Plant Facility system and equipment (e.g. DCS, Hot Oil, Air Compressor, Cooling Tower,Dust Collector Chiller system, Fire Protection system, Nitrogen system, steam, Natural gas system, waste water system and Central Vacuum System).
• Able to Understand and interpret Electrical and/or Mechanical Drawings/Diagrams.
• Good mechanical knowledge, strong preventive maintenance knowledge, good project implementation leadership.
• Demonstrate good trouble shooting and analytical skills Independently.
• Proficient in English and communication skills, Strong leadership skills, Driven with Strong commitment for success.
• Team player
• Good knowledge in mechanical, process control safety standards.
• Strong equipment troubleshooting hands on skill.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24844

To learn more about this opportunity, please contact Fiona Koh

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Fiona Koh| Registration No: R11092393

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. It performs translational research that covers the energy value chain from generation to innovative end-use solutions, motivated by industrialisation and deployment. ERI@N has multiple Interdisciplinary Research Programmes which focus on translational Research, Development & Deployment which focus on specific area of the energy value chain, and a number of Living labs and Testbeds which facilitate large scale technology deployment enabling validation and demonstration of real-world applications.

We are looking for a Project Officer.

Key Responsibilities:

• Synthesis and characterization of battery materials and fabrication. Precipitation, characterization and purity analysis of products by various characterization techniques
• Carry out optimization of the equipment and SOP of various processes for batteries
• Strategies and experiments related to recycling and upcycling of batteries including lab management
• Scoping of recycling strategies and innovation in battery recycling
• Prototyping activities including proof of concept demonstration of successful processes
• Responsible for project goals, deliverables, and objectives of the company project
• Preparing and delivering meeting presentations, notes, updates, and reports as per the request of the project

Job Requirements:

• Possess at least a Bachelor’s degree in Engineering /Science (Materials/Chemical/Mechanical/Nanotechnology/Physics/Chemistry or equivalent)
• Experience in materials and extraction methods of metals from batteries
• Experience in prototyping of batteries and working with various battery systems.
• Widely experience in various materials synthesis techniques
• Experienced in materials characterization, electrochemical battery fabrication
• Ability to conceptualize and communicate research work to other staff, management, and visitors
• Knowledge of scientific or materials engineering software will be an added advantage.
• Prior experience in the field of research is an added advantage
• An effective team player with good communication & interpersonal skills
• Ability to work in a team as well as independently.

We regret that only shortlisted candidates will be notified.

Responsibilities

• Proficient in mechanical equipment operations, maintenance, and team collaboration.
• Hands-on experience with pump overhauls, including centrifugal and diaphragm pumps.
• Familiar with performance matrix environments.
• Knowledge of Computer Maintenance Management Systems (CMMS), current Good Manufacturing Practices (cGMP), and Right First Time (RFT) techniques.
• Skilled in mechanical equipment troubleshooting and analysis.
• Capable of creating Job Safety Analysis (JSA) and Risk Assessments (RA) within documentation systems.

Requirements

• Minimum of 5 years of relevant experience in pharmaceutical, chemical, or petrochemical industries for senior positions; at least 2 years for junior positions.
• Willing to work in 12 hours rotating shift.

Tan Cheu Hoon, Fenny

EA License No.: 02C3423

Personnel Registration No.: R22105896

Project Manager (Mechanical & Electrical)

[Industrial | Commercial | Data Centre Industry]

• Basic: $4,500 - $8,000 (Depends on EXP)
• Working Hours: 5 Days
• Location: Woodlands

Interested applicants can sent your CV to email [email protected]

About our Client:
Our client is a leading organization specializing in engineering and technology solutions across diverse industries. They are committed to delivering innovative and efficient solutions for industrial, commercial, and data centre projects

Job Scope:

• Manage the full lifecycle of engineering projects, from initial concept to final handover, ensuring they are completed on time, within budget, and adhere to safety and quality standards.
• Prioritize tasks effectively, allocating resources and assigning team members to ensure the efficient execution of projects.
• Assist in preparing and reviewing tender bids for new projects, ensuring compliance with company policies and industry regulations.
• Evaluate and authorize any project changes that affect the budget, timeline, or scope.
• Lead complex or critical projects, monitoring progress and performance to ensure alignment with project plans.
• Address operational issues promptly to minimize delays and ensure project continuity.
• Select, mentor, and manage a team of project members, ensuring organizational goals are achieved and legal requirements are met.
• Ensure compliance with safety regulations and industry standards, maintaining the highest safety and quality protocols throughout the project.
• Allocate resources, including capital and manpower, to maximize productivity while keeping project expenses within budget.
• Approve project investments that align with the organization’s goals and financial strategies.

Requirement:

• Recognized Degree in Electrical / Mechanical Engineering, or a related field.
• Minimum of 8 -13 years of relevant experience in the Electrical / ACMV Engineering Industry.
• Strong interpersonal and communication skills with the ability to interact effectively with project teams and stakeholders at all levels.
• Self-motivated, results-driven, and able to work independently in a fast-paced, deadline-oriented environment.
• Proven leadership skills and the ability to manage teams and projects efficiently.

Interested applicants, please click "APPLY NOW" or send your resume to [email protected]

We regret to inform you that only shortlisted candidates will be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Kho Tong Hai | EA Reg No: R24122411

Facility Technician

• Monthly Salary: $2,000
• Working Location: Tanjong Pagar
• Working Days & Hours: 6 Days (7am-3pm / 3-11pm / 11pm-7am) rotate

Job Description

• Perform all repair and maintenance works on the Hotel's lighting, power heating, ventilation, air-conditioning, refrigeration, fire protection, kitchen, laundry and plumbing equipment.
• Check system or equipment for faults and follow up on the repair works if required.
• Monitor works carryout by contractors and ensure works are properly done, safe and secured.
• Carry out preventive maintenance work of properties.
• Ensure the fire and safety procedures are carried out at all times.

Job Requirements

• NITEC in Electrical / Mechanical or equivalent
• Able to work rotating shifts including weekends and public holidays

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Title: Mechanical Designer (ID4648)
Location: Bukit Batok
Working Hours: Mon-Fri 8.15am - 5.30pm
Salary: $3000-$3500

Roles and responsibilities:

• To do conceptual and detailed machine design with regard to mechanical aspects;
• To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.
• To prepare final design configurations, layouts, solid models and production/engineering data;
• To assist in preparation of machine documentation, specifications, manual.

Job Requirements:

• Diploma or relevant in Mechanical Engineering;
• Will consider fresh-graduate.
• Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.
• Proficiency with Solid Works is desirable;
• Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Job Purpose

The Professional Officers Division (POD) houses a centralized pool of academic staff under the Professional Officers scheme. Professional Officers come with specialised and deep technical skills acquired through extensive industry experience. They form the talent pool which brings a much-needed industry perspective to student learning. They facilitate applied learning and applied research in SIT, complementing the academic expertise of the faculty to bring industry practices and applications into the curriculum.

Professional Officers leverage on their industry experiences to create authentic learning environments, where discovery and innovation take place. They act as coaches and mentors to students during practical learning activities such as laboratory sessions, Capstone Projects and the Integrated Work Study Programme (IWSP). Professional Officers could also lead or work with faculty on industry innovation projects to provide solutions to the industry.

In addition to their role in applied learning and applied research, Professional Officers manage the centralised laboratory facilities and resources in SIT. With Technical Officers, laboratory safety professionals, and administrators in POD, they jointly develop central policies and processes for the safe and seamless operation of laboratories in SIT.

Key Responsibilities

• Design and teach labs & practice modules.
• Mentor students in Capstone Projects and the Integrated Work Study Programme (IWSP).
• Lead or co-lead innovation projects with industry.
• Manage labs and equipment to support academic programmes and applied research.
• Ensure safety in labs

Job Requirements

• A good degree in Building Services, Mechanical Engineering or a related field. Masters, PhD and/or relevant professional certifications like registered PE/CEng would be advantageous.
• Deep technical specialist with 10 or more years of working experience with mechanical systems in Building services environments or facility design consultancy would be preferred.
• Experience in following areas is highly desirable:
• Both design and management of mechanical building systems.
• Use of BIM software for design and engineering works and develop BIM models as well as knowledge in using CAD software such as REVIT, AutoDesk and ArchiCAD.
• Have working knowledge of building services systems such as Heat Ventilation Air Conditioning (HVAC), refrigeration, lift, heat exchangers, micro-climate, simulations, fire-testing and acoustic experiments
• Have prior working experience in building and facility management
• Having experience with materials and materials property as well as materials testing, and fire testing is advantageous.
• Extensive experience and knowledge of industry practices to bring industry perspective to SIT as well as experience with Green Marking and energy management is advantageous.
• Keen interest in innovation projects, with demonstrated ability in developing solutions to technical problems.
• Strong supervisory skills and enjoy working closely with students in an educational environment.
• Demonstrate proficiency to keep abreast of development in the field and pursue professional certification programs. Possess industrial certifications in relevant areas will be an added advantage.