As a Micron Singapore Construction Facilities Mechanical (Dry System) Engineer, you will be designing, operating, and troubleshooting various Semiconductor Mechanical Dry systems. Engineering assignments usually include equipment or systems design and development, equipment/material testing, preparation of specifications, process study, research investigations, report preparation, and other activities requiring a good knowledge of mechanical, electrical, control principles and techniques.

Roles & Responsibilities

• Design, operate and fix HVAC Systems; General, Solvent, Ammonia, and Acid Exhaust systems; House Vacuum Systems; Compressed Dry Air systems, Cleanroom and non-Cleanroom Make Up Air Systems, Structural, Civil, Test/Balance/Vibration; and Wafer Fab Process Tool Installations.
• Perform work, which involves conventional engineering practices including a variety of sophisticated features, such as conflicting design requirements, incompatibility of conventional materials, and difficult coordination requirements.
• Attend and participate in factory acceptance tests, (FAT), site acceptance tests (SAT) & equipment commissioning.
• Sustain operations, production personnel and construction trades to provide detailed designs and specifications for installing new capital equipment and systems.
• Conduct engineering and supervisory duties; coordinating outside consulting resources
• Assist in cost estimates and analysis for proposed projects; and providing support for starting up new equipment, which includes ensuring that all equipment connects with other mechanical and electrical systems seamlessly.
• Provide engineering services and review facilities work orders, maintain various administrative and engineering databases used for job tracking, engineering data, capital equipment facilitation, and critical system loads and capacities.
• Specify critical components for design projects and ensuring designs meet all applicable codes and rules.
• Provide code review and analysis using NFPA, FM, UBC, UFC, UMC, IBC, IMC, IFC, and NEC; perform research and development on emerging facilities and technologies to support innovative and groundbreaking semiconductor processes.
• Participate in mid to long-term infrastructure planning, ensuring facilities supports the overall company plan.
• Carry out all work in accordance with company safety guidelines
• Maintain good communication with the Mechanical Engineering organization, as well as other engineering teams and all customers throughout the organization.
• Collaborate with global facilities during the construction phase to ensure that lessons learnt are incorporated into the design where applicable.

Requirements:

• Education: Bachelor Degree in Mechanical Engineering or any related field is required.
• Experience: Minimum 3 years of experience in HVAC Systems; General, Solvent, Ammonia, and Acid Exhaust systems; House Vacuum Systems; Compressed Dry Air systems, Cleanroom and non-Cleanroom Make Up Air Systems, Structural, Civil, Test/Balance/Vibration; and Wafer Fab Process Tool Installations.
• Detailed understanding of Semiconductor Mechanical Dry systems.
• Proficiency in digital literacy including word processing, spreadsheet, and database packages.
• Good team work and organizational skills.
• Excellent problem-solving and communication skills.'
• Able to work on multiple tasks concurrently and prioritize and schedule workload.
• Experience in semiconductor industry or high-tech construction environments are preferred!

Working Location:

Woodlands, 1 North Coast Drive, F10N

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

• Engineering Construction Company
• Competitive Benefits
• Candidates who have completed semiconductor projects will be preferred.

Our client is a Engineering and construction company that specializes designing and delivering mega and significant projects. They are looking for an experienced Senior Mechanical Engineer for their expanding business.

RESPONSIBILITIES

• Expertise in M&E systems, testing, commissioning, and familiarity with construction processes, project management, BIM, and Green Mark 2021 requirements.
• Manage engineering teams, coordinate with stakeholders, and oversee M&E aspects of construction projects.
• Strong analytical, problem-solving, and decision-making abilities for technical issue resolution and goal achievement.
• Knowledge of quality control, industry standards, and safety regulations to ensure compliance and maintain a safe work environment.
• Financial skills to assist in budgeting, reporting, and implementing cost-control measures

REQUIREMENTS

• Bachelor’s Degree in Mechanical or Electrical Engineering.
• Accumulated around 6 years of experience handling M&E Engineering ideally in semiconductor or construction projects

OTHER INFORMATION:

• Location: depending on Project
• Working hours: 5.5 Days
• Salary: To be Discussed based on experience (Salary will commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

How To Apply:

This position is an excellent opportunity for a dynamic individual. It comes with stimulating challenges that will mould your capabilities and reveal your potential.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: (R1875905), Achieve Career Consultant Pte Ltd EA Licence No. 05C3451) (BEP) by clicking the ‘Apply link’ /

or call your friendly Consultant, David, at 9271 7510 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Job Description

• Prepare/Review spare parts list and equipment data inventory control and ensure critical spare availability
• Optimise spare parts and manage stock effectively by using CMMS TMQ-W.
• Ensure no down time due to unavailability of spare parts.
• Service used equipment’s and components and ensure ready to use all time.
• Analyse and improve equipment reliability of utilities & facilities to prevent recurrence with production group and contractors.
• Manage in-house contractors to execute maintenance timely and effectively.
• Develop and implement routine maintenance and inspection schedule for plant equipment’s and execute Preventive maintenance, Routine inspection and periodical inspection on Rotating and static equipment’s by co-ordinate with contractors at site.
• Manage annual shutdown maintenance related to facilities and management of actual site work, liaising with contractors and production group.
• Update long-term maintenance plan for facilities and utility equipment’s.
• It is a newly established 100% owned subsidiary international Parent company. To construct a new plant to produce solution-polymerized styrene-butadiene rubber (S-SBR) in Jurong Island.Ensure all maintenance activities comply with AKSS EHS policies.Will need to work on some weekend and outside office hours monthlyPlease find the attached job description for Maintenance Mechanical Engineer. We require 1 headcount for this position.Urgent Hire!.

Job Requirement

Requirements

1. Degree/Diploma in mechanical engineering or the equivalent
2. 3-5 years of experience in Plant & facilities in chemical plant.
3. Basic understanding of maintenance technology manufacturing process plant environment.
4. Demonstrated ability to adjust contractors independently and effectively.
5. Good interpersonal and communication skills
   

• Responsible for 3D product design and its requirements

• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions

• Create proof of concepts

• Generate engineering drawing with proper GD&T and Tolerance Stack up

• Define test requirements needed for all the designed products

• Perform Patent search for possible design infringement

• Drive Projects with tight timeline

• Any other duties as and when assigned

• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma/Bachelor Degree in Mechanical / Industrial Engineering

• 2-3 years of relevant experience

• Good exposure in Plastic Injection molded parts design

• Knowledge of product design, engineering plastics behavior, product certification

• Knowledge of CAE simulation will be an added advantage

• Competent in Engineering calculations

• Hands on 3D CAD & CAE experience

• Good problem-solving skills with strong technical acumen

• Location: Pioneer/Joo Koon| Mondays to Fridays (8:30am to 5:45pm)

• Monthly salary x 13 + Variable Bonus. Monthly salary will commensurate according to experiences

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

Job Descriptions

• To render high quality sales/aftersales support to distributors and customers
• To provide advice and work on commissioning schedule and oversee building schedules of shipyards
• Assist factory on appraisals of engines and technical issues regarding engine performance
• Keep track of Distributor’s sales performance in ensuring expected sales budget is met
• Assist the development of sales activities of Distributors
• Provide support to distributors in the undertaking of projects, including technical support and provide updated information to department manager
• Provide full support in the preparation of sales seminar or any other sales or after-sales related activities or events including sales campaigns, promotions and programs for distributors and end-users
• Provide support to HQ on project co-ordination
• Oversee building schedules of shipyards and technical & commercial meetings with customers
• Provide advice on the commissioning schedule and oversee the entire process
• Any other duties assigned within the course of work

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Growth Opportunities
• MNC
• 5 days work week

RESPONSIBILITIES:

· Plan and forecast project monthly and weekly installation schedules.
· Anticipate potential site issues and eliminate any risks.
· Liaise with site person-in-charge for work arrangement and manpower planning.
· Liaise with suppliers for delivery of materials and equipment by raising MERF (material- equipmentrequisition-form) for approval.
· Attend regular project meetings (such as site progress and co-ordination) with interested parties
including clients, architect, consultants, main contractor, and sub-contractors.
· Monitor, co-ordinate and direct the execution of work with site representatives and workers for
smooth workflow.
· Submit method statement, risk assessment and shop drawing.
· Submit progress report and progress claim.
· Ensure design of Mechanical & Electrical work meets with clients’ requirements.
· Perform pre-inspection of deliverable material and equipment, and after delivery inspection for any
defective goods.
· Inspect site installation work for quality and assurance.
· Conduct joint site inspection with client’s representatives.
· Conduct pre-testing and commissioning activities.
· Clearance of defects and outstanding works.
· Prepare as-built drawings for joint inspection with clients’ representatives.
· Prepare Operation & Maintenance manuals for client’s acceptance.
· Assist in the settlement of project final account including variation orders.

Simply submit your application with your updated Resume in MS Word Format to Shubhi Dugar (EA Personnel Reg. No.: R21100680) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Shubhi, at 6590 9968 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Job Title: Mechanical Engineering Technician (Motors and Engines)

Responsibilities and Duties:

• Inspect and troubleshoot equipment, machinery, and operating systems, identifying and correcting issues as needed.
• Maintain high standards in mechanical operations, ensuring systems meet operational and safety requirements.
• Diagnose and resolve mechanical issues with motors, pumps, conveyors, hydraulic systems, and other related equipment.
• Provide expert-level technical support and guidance to junior technicians when necessary.
• Perform both independently and as part of a team to ensure timely completion of tasks.
• Adhere strictly to company safety guidelines, procedures, and industry standards.
• Conduct regular preventive maintenance on machinery as per established protocols.

Technical Skills:

• Use a variety of hand tools, power tools, and rigging equipment for daily tasks.
• Perform welding using cutting torches as needed for repairs and maintenance.
• Operate and maintain heavy industrial equipment, including forklifts, scissor lifts, basket trucks, and bobcats.

Compliance and Reporting:

• Ensure compliance with both company and customer regulations, as well as policies.
• Maintain and manage personal tools, including keeping an up-to-date, documented personal tool inventory.
• Accurately manage time records and complete work orders in a timely manner.
• Foster positive relationships with both customers and team members through effective communication and professionalism.

Salary: $3k - $5k

Location: AMK/ Yio Chu Kang/ Central

Job requirements:

- 2 to 3 years experience and above

- Requires BCA in BIM Cert

- All Mechanical must have experienced in ACMV & LTA/SMRT

Job descriptions:

● Develop and design mechanical systems (HVAC, plumbing, fire protection) in 3D using BIM software (Revit, AutoCAD, etc.).

● Prepare detailed mechanical design models, drawings, and specifications for commercial, residential, and industrial projects.

● Participate in design coordination meetings with

architects, MEP engineers, and contractors to resolve clashes and ensure efficient project execution.

● Utilize BIM coordination tools like Navisworks to detect clashes and implement clash resolution processes for mechanical systems.

● Produce and maintain detailed documentation, including BIM execution plans, as-built drawings, and equipment schedules.

● Perform quality control checks on mechanical systems designs and ensure accurate implementation of BIM models in the construction phases.

Able to start work within short notice will be highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Salary: $4.2k - $5k

Location: AMK / Yio Chu Kang / Central

Job Requirements:

● Min 5-8 years of relevant experience and above

● All Mechanical must have experienced in ACMV & LTA/SMRT

● Minimum Qualifications/ Experience/Skills

● Graduate in Mechanical Engineering.

● Advanced skills using company software

● Proven ability to communicate well in written and verbal communications

● Design thinking for product inventions and enhancements

● Motivation and commitment to providing interpersonal customer service

● Knowing and applying current industry standards and information

Job Descriptions:

● Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team.

● QA/QC documentation of engineering deliverables (DTS,MSS,RFI)

● Liaison with clients, project managers, architects, contractors

● Assist in resolving any technical problems faced during project design and/or construction stages

● Any other required duties as required by the Project Team.

Able to start work within short notice will be highly advantageous.

*Please be notified that only shortlisted candidates will be notified*

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Job Description

• Ensure and maintain in site co-ordination of housekeeping and safety activities for the concerned modules with various disciplines
• Liaise with Project Lead / Superintendent to understand and follow up of the project schedules. Expedite the equipment installation works to achieving targeted progress
• Updating and reporting project progress reports and plan for one week look ahead of activities to be completed
• Assist in manpower and resource scheduling and deployment, daily manpower deployment and allocation
• Attend daily VSCC meeting
• Obtain hot work permit and entry into confined space permits or any other work permit system
• Monitor job progress and ensure quality work at targeted schedule
• Prepare reports on job status, work completion and report to the Project Engineer
• Lead all inspections and ensure proper handling over to clients
• Liaise and coordinate with other departments on project issues
• Able to provide guidance and training to subordinates in the course of work
• Ensure that his workers are trained and instructed on the proper and safe working procedures
• Maintain safe and healthy working environment in workplace and to ensure correct safety practices are adopted by all men under his charge

Job Requirements

• Diploma/Degree in Mechanical Engineering
• Minimum 5 years of maintenance working experience in Marine Shipyard
• Excellent written and good communicative skills, able to interact with people of all levels and teamwork
• Able to handle mechanical equipment installation on FPSO module, load test and preservation of valves, instruments and mechanical equipment
• Flange management on piping will be a plus point

• ITE in Mechanical Engineering or equivalent
• Good technical Knowledge on Mechanical or Electrical and Instrumentation
• Hands-On experience on Pumps (Centrifugal, gear pumps, etc.) and Motors
• Customer service oriented
• Independent and proficient in basic writing skills
• Class 3 driving license is a plus
• Relevant working experience in pumps servicing/repair

1. JOB DESCRIPTION

Job Title

MECHANICAL DRAUGHTSMAN

Occupation

MECHANICAL DRAUGHTSMAN

Job Description & Requirements

Position Summary

Design and Develop Packaging Products by providing 2D Drawing for customers and operations.

Main Accountabilities

The person is in-charge of

· Designing of products as required by the customers through the informations from the Sales Team.

· Preparation of Drawings and Bill of Materials for the products (Foam, Cartons, XPallet).

· Suggests improvements or modifications to current products for customers’ approval.

· Provides support to Production to ensure a more cost effective and more efficient way of producing the products.

· Integrates any requirements not stated by the customer but necessary for the intended use, where known

· Includes statutory or regulatory requirements to the designs, if applicable.

· Provides the specifications of the materials as specified in the Bill of Materials.

· Conduct Drop Tests and Vibration Tests

· Provides the specifications of the products.

· Work independently and can assist the Manager when the latter is not around.

· External discussions with customers together with Sales Team.

Internal & External Working Relationships

· External Customer

· External Vendors (ie Die Cut Mould Maker)

· Sales team

· Customer service

· Purchasing

· Operations (Production, Quality)

Job Requirements (Qualifications, Skills, Experience, Competencies)

· Engineering Background (preferably Mechanical, Industrial, Packaging or Design) or any related field.

· Experience in designing.

· Proficient in AutoCAD/ Solidwork or other CAD softwares.

· Knowledgeable in doing 3D Drawings.

· Preferably has a background in designing packaging materials.

· Has good Organizational and Planning Skills

· Knowledgeable of the concept of Engineering Statics and Dynamics.

· Knowledgeable on Microsoft Office (Word, Office, Powerpoint) or similar softwares.

· Proficient in doing reports (verbal and written)

· Has interest in personal development through new technologies and innovations.

· Good problem-solving skills

· Positive and Motivated

Responsibilities and Duties

*Carry out preventive maintenance and corrective repair works on packaging and conveying equipment
• Troubleshoot and rectify electrical, mechanical, pneumatic and hydraulic system faults on equipment
• Identify mechanical, electrical, and technical issues through inspections and tests
• Analyze problems, diagnose malfunctions, and find solutions
• Use various tools and equipment for diagnosis and repair
• Maintain accurate records of repairs and parts used
• Communicate findings and repair option
• Test vehicles post-repair to ensure proper functionality
• Order and replace parts, collaborating with suppliers
• Attend to breakdown repair and recovery of operational equipment
• Reduce equipment downtime and enhance equipment performance through quality maintenance works
• Proper recording of works carried out on equipment. Equipment includes vehicles, chassis, forklift, industrial facilities, etc (list is non exhaustive)
• Any others adhoc job assigned by supervisor
• Maintain high standard of housekeeping at workplace
• Ensure strict adherence to all workplace Health & Safety policies, legal and company regulations, with proper documentation and storage.
• Practice safe work procedures and safety rules implemented at the workplace.
• Not to engage in any unsafe or negligent act that may endanger self or others.

Key Responsibilities

• · *Maintenance and Repair*: Perform routine maintenance, repairs, and troubleshooting on oil and gas equipment (Exchanger, Pump, Vessel, etc…)
• · *Technical Support*: Provide technical assistance and guidance to operations personnel, contractors, and other stakeholders.
• · *Inspections and Testing*: Conduct regular inspections and testing to ensure equipment is functioning correctly and safely.
• · *Documentation and Reporting*: Maintain accurate records of maintenance activities, inspections, and repairs, and provide detailed reports to management.
• · *Safety and Compliance*: Ensure all work is performed in accordance with industry regulations, company policies, and safety procedures.
• · *Troubleshooting and Problem-Solving*: Identify and resolve equipment issues, using analytical and problem-solving skills.
• · *Collaboration and Communication*: Work closely with operations, maintenance, and other teams to ensure effective communication and coordination.
• · *Continuous Improvement*: Identify opportunities for improvement and implement changes to optimize maintenance processes and equipment performance.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Our client is a leader in semiconductor manufacturing equipments, providing designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits which are widely used in industries such as consumer electronics, IT and communications, automotive, aerospace, healthcare and others. Its core capabilities are in providing high-end vision inspection and ultra-precision handling solutions for die-sorting, vision inspection and laser marking requirements. They are hiring for Senior Mechanical Design Engineer and will like to invite interested candidates to send your detailed resume to [email protected]

Senior Mechanical Design Engineer

Responsibilities:

Design and develop series of marking/inspection/ sorting/customised semiconductor equipment to meet the processing and automation needs of customers. Main duties involve

• Design standardization
• Costing and project management
• Machine and module conceptualization design
• Design for manufacturing (DFM), design for assembly (DFA) and Concurrent engineering
• Pneumatic/ hydraulic circuit design
• Detail fabrication drawings, assembly drawings and layout drawings
• Selection and sizing of standard components available off the shelf
• Undertake new product development or be involved in sustaining engineering/CIPs

Requirements:

• Bachelor/ Master of Engineering with minimum 5 years relevant experience
• 3D solid Modeling, preferably Pro-E (others like Solid Edge, Auto Inventor, Mechanical Desktop, Solid Designer are also acceptable).
• Strong project management skills
• Good track record in:

1. Ultra High Precision machine design
2. High Speed Pick and Place mechanism design
3. Structural, kinematics and dynamic analysis and FEA simulation
4. Geometrical tolerance and dimensional analysis (e.g. stack up error)
5. Engineering material selection
6. Design troubleshooting
7. Application of analysis tools like FMEA, DOE

Job Summary

Process & Mechanical design, design review, RFQ preparation, technical evaluation, site installation supervision and coordination.

Job Description

• Review engineering standards/specifications/drawings, tender, quotations and proposal documents.
• Preliminary and detailed process & mechanical design of chemical plant, incineration plant, food waste plant, water/wastewater plant, offsites & utilities, pollution abatement, etc. including mechanical specification, design calculation, equipment layout design, support design, etc.
• Collaborate with BIM team for 3D model development and ensure the model is according to design.
• Coordination of internal and external engineering activities and the interdisciplinary interfaces to ensure that the project objectives and needs are achieved and exceeded.
• Prepare mechanical equipment requisitions and to ensure that the items procured are in accordance with specifications and schedule to ensure timely delivery.
• Technical review of mechanical equipment/system vendors proposal and submission.
• Coordination with equipment/system vendors on mechanical design and installation work during project execution stage.
• Prepare mechanical technical submissions and work with design lead to liaise with stakeholders, not limited to client/project consultant for submission approval.
• Prepare method statement for all the equipment installation
• Support during construction, installation, start-up, testing and commissioning activities.
• Ensure compliance & perform any other duties as requested by design lead/ engineering management.

Requirement

• Bachelor’s degree in Chemical or Mechanical Engineering or related engineering discipline.
• 3 years and above in process & mechanical design in process plant (such as chemical plant, incineration plant, food waste, water/wastewater plant, offsites & utilities, ACMV, pollution abatement, etc) and hands on experience working in fast paced, diverse and multi-disciplined projects and O&M activities.
• Familiar with process & mechanical design code of practice and standards in Singapore, EN, ASME & PED.
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office software.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Willingness to take on responsibility and work overtime to meet deadlines.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Ability to uphold the use of standards and escalate issues in a timely fashion.
• Ability to work independently with minimal oversight.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

As a Mechanical Architect you will be the driving force for the development of high-tech, highly complex systems for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. Starting during the pre-concept phase, you act as a counterpart for the Project Manager within T&D for scoping the project and challenging our customer. While going through the different design phases, you will be the driving force who challenges the feasibility and cost-effectiveness of the proposed design solutions, bringing together the multidisciplinary team on a technical level while acting as a technical counterpart on system level with our customers.

Your responsibilities include:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer.
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of (mechanical) concepts.
• Definition Phase: develop Description of System Design Requirements and Specifications and discuss them with internal/external stakeholders.
• System Design Phase: generation of system design concepts and reviews:
• Develop well-considered choices, validated against system requirements
• Definition of high level modules and related technical interfaces
• Monitor that projects stay within agreed specifications.
• Make use of your creativity and helicopter view to find solutions in case of conflicts
• Detail Phase: supervise the creation of 3-D models and drawings, ensuring (sub)module interfaces meet their respective requirements.
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production.
• Production release: release the design for production.

Requirements:

• Master’s Degree or PhD in Mechanical or Mechatronic Engineering, preferably with a focus on construction / precision mechanics.
• At least 10 years of relevant working experience (semicon, precision mechanics, or similar).
• Extensive knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness.
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation.
• Experienced in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems in both the static and dynamic domain.
• User of 3D design tools (e.g. NX or SolidWorks).
• User of product lifecycle management systems (e.g. TeamCenter or EPDM).

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Purpose and Scope

You will provide mechanical maintenance works to support the operations of the Energy from Waste plant.

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualification, Skills and Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry
• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)