Description

• Design and optimization of mechanical components for HVAC systems
• Analysis of mechanical systems, including structural, fatigue, thermal and vibration
• Develop manufacturing drawings in accordance with applicable standards
• Construct and build developed systems
• Collaborate and interact with external vendors for component selection, manufacturing and system assembly
• Read, interpret and review technical drawings, schematics, and computer-generated reports
• Generate operating procedures and provide technical information
• Collaborate and analyze customer design proposals, specifications and requirement, and to evaluate and propose solutions

Requirements

• Bachelor’s degree in mechanical engineering or equivalent engineering degrees
• Diploma with good experience in mechanical design and system assembly will also be considered
• Good mechanical aptitude and knowledge
• Proficient in SolidWorks and modeling
• Excellent problem solving and project management skills
• Background in HVAC engineering is a plus
• Experience in product development especially in HVAC product development is a plus
• Technically sound coupled with experience in sourcing, negotiation and cost control
• Possess initiatives, logical thinking and good analytical abilities, and able to resolve issues from multiple perspectives.
• Passion for the job and a challenging spirit preferred.
• Strong communications and interpersonal skills

Job Description:

• Perform global structural analysis with all major connection detail ULS/ALS.
• Perform global fatigue analysis with all major connection detail FLS.
• Perform complete structural analysis reports for all main structure foundation, support, lifting, sea fastening, load out, dry & wet tow up to classification society approval level.
• Able to perform steel beam design such as ULS bending, shear, bucking verification and SLS deflection verification using the beam section properties.
• Perform mesh load transfer for structural analysis.
• Perform structural design specification.
• Perform main scantling and steel weight calculation.
• Perform structural construction standard in detail engineering.
• Perform Collision analysis.
• Design and perform all kind of major structural connection detail and analysis.
• Coordinate with classification societies for design and analysis approvals.
• Design and drafting of all structural drawings such as hull lines plan, structural category plan, deck loading plan, full penetration welding plan, scantling drawings, major connection scantlings etc. (Optional)

Requirements:

• Academic qualification in Marine/Ocean Engineering or Civil Engineering
• Minimum 8 years of relevant working experience in the whole process of concept/basic design/detail engineering of semi-submersible substructure/floater design in Floating Offshore Wind Turbine (FOWT) or offshore rig industry.
• Proficient in software packages in SESAM Genie, SACS, Python and AutoCAD
• Good knowledge of all regulations such as DNV, ABS, BV, IEC etc.

Are you up for the challenging next step in your career? Stolthaven’s Asset Management – Projects department is looking for a Project Engineer who responsible for execution of the technical projects (Capex) for the terminals.

As a Project Engineer, you will be the project manager and have responsibility for the engineering and construction of projects, including all relevant project management tasks.

In this dynamic role, your responsibilities range from construction and modification of physical assets to providing engineering support to the Asset Manager in the design and construction of bulk liquid storage facilities and related equipment. Within the local and global Asset Management teams, you will share knowledge & experience on your specific project or engineering discipline expertise and be involved in efforts to train Asset Management colleagues or other Stolthaven functions.

As part of the local Asset Management team, you will work in close cooperation with the MR&I Engineer, Maintenance Supervisors and other roles for developing project cost estimates to existing and proposed facilities in consideration of environmental and customer requirements. The position is also responsible for review and quality control of field construction work, although potentially supported by Construction Supervisors. Implements programs for compliance with all government and regulatory requirement and other technical areas.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Manager. Typically class I & II capex projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate for the execution of the capex program together with (main) contractors and other departments and disciplines
• Prepare Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team
• Responsible for coordination of procurement and or contracting of materials and services for your projects together with Stolthaven procurement
• Governance on quality and legal and or safety requirements during the whole project including execution
• Responsible for commissioning and closing of the project to operations and maintenance and ensure closure of project including timely completing of as-built files
• Responsible for leading change process in case of scope change
• Responsible for safety, quality, progress and cost control and reporting during the project
• Sets priorities and project scheduling for completion of projects within required deadlines
• Provides input to Manager of Engineering as required to complete monthly cost and schedule tracking reports on capital projects
• Supervises contractors in activities related to new construction, modifications to existing facilities and plant repair items
• Responsible for leading project evaluations and Management of Change processes for the projects at hand.
• For larger projects, this role can also be part of a project management team whereas the responsibilities are defined by the Project Manager.

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• o Proactively identifies technical risks in projects and seeks for mitigation
• o Providing assistance in the formation of annual capital budget forecasts
• o Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks.

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, E&IA, Civil or related field

2. Proven track record in an engineering design position, preferably in the field of storage tanks or in a related industry

3. Must be familiar with all applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location. This could include IEC, API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes.

4. Project management experience is preferred field

5. Minimum 5 years progressive engineering experience in terminal or related industry

6. Minimum 10 years progressive experience in terminal or related industry may be accepted in lieu of a degree

7. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

8. Fluency in English and preferably in Chinese (read & write) as the job requires liaising with our Taiwan joint venture

9. Able to build and maintain both internal and external relations on various levels

10. Able to communicate effectively both verbally and in written

11, Proven safety leadership and service mindedness

12. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

13. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

14. Must be computer literate with specific skills in MS Office

15. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

16. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

17. Depending on the required engineering discipline, have knowledge of the following:

• Mechanical: Must have in-depth knowledge of all standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Must be familiar with all standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation
• Affinity with IT network components (e.g. firewall and basic networking setup) and experience with FAT for E&I system, panels, automation, etc.
• Knowledge and experience with reviewing drawings such as P&ID, Single Line Diagram, MCC drawings and other E/I/Automation specifications, calculations and drawings
• Knowledge and experience with ACAD and E-plan drawings
• Experience with trouble shooting E&I installations

18. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Responsibilities:

• Oversee wafer manufacturing to meet quality, yield, and production targets.
• Collaborate globally on process alignment and qualification of new processes, suppliers, and consumables.
• Work with cross-functional teams to enhance process capability and yield.
• Coordinate troubleshooting for process issues and yield losses.
• Drive continuous process improvements and resolve chronic quality issues.
• Develop best practices and innovative solutions for ongoing improvement.
• Conduct statistical data analysis for process improvement and data interpretation.
• Utilize problem-solving techniques (8D, Fishbone, DOE) and risk assessment tools (FMEA).

Requirements:

• Degree in Engineering or equivalent.
• Knowledge of quality management systems, data analysis, DOE, and SPC
• Proficient in statistical software (e.g., JMP).
• Experience with Visual Basic, databases, and queries (preferred).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

1. Responsible for SI/PI signoff of chip design, package design and PCB design.

2. Responsible for modeling high speed I/O and PDN.

3. Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

1. Responsible for product electrical specifications related to high speed I/O.

2. Responsible for modeling and simulation of EMC issues.

Requirements:

Experience/Skills:

1. 10+ year working experience in SI/PI

2. Deep understanding in electromagnetic theory, transmission line theory and microwave theory

3. Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation

4. Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding

5. Hands on with lab equipment including high speed oscilloscope, spectrum analyzer and network analyzer

6. Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.

7. Skilled in data processing with script in Python, Matlab or other language.

8. Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.

9. Good communication skills and team work.

10. Education: MS/PhD

Senior Mechanical Engineer requirements:

- The project is a Power Plant at Jurong Island

- Familiar with Singapore's local technical standards, and acceptance process.

- Under the age of 35.

- Speak English

- Good health and strong safety awareness, good at communication

- Obey the Mechanical department management

- Have a qualified and valid skill certificate

- At least 5 years of mechanical work experience in Singapore, preferably as a mechanical engineer at the construction site of a Chinese company.

- Able to read Mechanical Installation drawings and guide site construction work drawings.

- Have a strong sense of responsibility, can take the initiative to work, reasonable planning, comprehensive consideration of work tasks

- Can communicate with owners, subcontractors, and other departments for permits and other works

- Able to start work on short notice will be an advantage

- Mechanical engineer with working experience in gas turbine power plant is preferred

- Adapt to our company's working hours

- Subcontractor management experience is preferred, have subcontractor management ideas

We are looking for Data Analyst/Engineer to join a fast growing IT company!

• Exciting opportunity to work with a team of professional to deliver high quality applications
• Permanent position, positive working environment
• Salary up to $7,000 + AWS + bonus

Responsibilities:

• Develop, construct, test and maintain data architectures such as databases, data warehouses and large-scale data processing systems
• Design and develop data pipelines/systems for data modelling, mining and production
• Ensure the data architecture is in place to support routine and ad-hoc requirements of data analytics team, stakeholders and the business
• Leverage on variety of programming languages and data crawling/processing tools to make raw data clean and highly available for use in descriptive and predictive modelling
• Recommend and implement ways to improve data quality, reliability, flexibility and efficiency
• Ensure data assets and data catalogs are organized and stored in an efficient way so that information is easy to access and retrieve
• PL/SQL and SQL Tuning and optimization of newly develop and existing applications

Requirements:

• At least 3 years' working experience in data architecture, data warehousing, data processing, data modelling and ETL/ELT, familiarity with real-time streaming solutions.
• Working experience in Kubernetes-based DevOps practices such as container orchestration, CI/CD pipelines, and microservices deployment.
• Working experience in database development (Oracle SQL/PLSQL) and familiar with AWS cloud environment

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Liew Chien Hui (Vivian) - R2090138
ScienTec Consulting Pte Ltd – 11C5781

Key Responsibilities:

• Carry out implementation activities for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, and qualification of facilities in accordance with site to approved procedures.
• Provides trouble shooting / continuous improvements to processes / systems.
• Maintain high GMP standard meeting the regulatory expectations such that the site is always inspection ready.
• Monitor and enforce compliance measures (including Data Integrity and safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.
• Implementation of the GSK Production System (GPS) for Engineering department.
• Support on shutdown activities and on preventative plant maintenance for various systems at site.
• To support the development of facility master plan to ensure compliance to engineering standards, management of obsolescence and asset replacement.
• Monitor and manage the DCS/PLC systems to ensure constant and reliable support to the plant at all times so as to minimize disruption to the production process.

Skills, Knowledge & Experience:

• Good degree in Controls and Instrumentations - related progream
• Minimum 2 years of Controls experience in the process / pharmaceutical industry
• Experience in Delta V system, especially batch process.
• Experience in SIL calculation and TMR system (Honeywell Safety Manager) will be added advantage.
• Experience in the Siemen PLC system will be added advantage.
• Good understanding of validation process
• Familiar and understanding of Global Engineering Standard (GES) and understanding of industrial standards.
• Basic commercial knowledge & project management skills
• Effective communication & Operational Excellence skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

We are looking for a Software Test Engineer experienced in manual testing.

• Gain exposure to large scale government projects.
• Salary package up to $6,200.
• Hybrid work arrangement.

Responsibilities:

• Establish quality assurance deliverables for stories in upcoming iterations/sprints, for functional and non-functional test areas
• Work closely with development team to conduct testing of modules developed for application/ system integration and enhancements.
• Create detailed, comprehensive and well-structured test plans and test cases.
• Perform thorough regression testing when bugs are resolved.
• Stay up-to-date with new testing tools and test strategies.

Requirements:

• Degree in Computer / Computer Science, Electronics and Computer Engineering, Information Technology or equivalent.
• Minimum least 3 years of quality assurance/testing experience.
• Experience in Agile development and testing methodologies.
• Testing certifications is an advantage (eg. CSTP, CTAL).

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J52276 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

Position Overview

Be responsible to research and develop innovative computer vision/deep learning algorithms for image applications.

Responsibilities

1. Research, develop and optimize computer vision/deep learning algorithms for image applications, such as, object recognition, face recognition, video analytics, image quality enhancement, and 3D reconstruction.

2. Explore, design and implement new algorithms/features according to marketing requirements.

3. Algorithm testing and verification.

4. Algorithm integration in system architecture.

Requirements

1. Ph.D. or MS with equivalent practical experience in Computer Science or Electrical Engineering or related disciplines such as Applied Mathematics/Statistics.

2. Broad knowledge in various computer vision related topics such as deep learning, object recognition (detection, classification, segmentation) and tracking, stereo, and/or 3D reconstruction; candidate with image sensor knowledge is a plus.

3. Strong knowledge and extensive hands-on experience of independent algorithm research; candidate with strong mathematics background is a plus.

4. Excellent C/C++ programming skills, proficient with scripting languages (e.g. Python or Matlab), and extensive experience with OpenCV.

5. Excellent verbal and written communication skills.

Responsibilities:

• Identifies, troubleshoot problems and performs root cause analysis study of equipment failures, recurring breakdown, and equipment defects in order to take effective corrective and preventive
• Liaises closely with Engineering on technical specifications required for machinery fitting, documenting the project requirements for the arrangement of machinery, equipment and system installation work
• Assists with the preparation of procedures, risk assessment, HSE work method statement and etc. under the supervision of senior team members and Project Manager to ensure all the requirements have been fulfilled
• Prepares job-list, work schedule and planning of manpower resources (i.e. yard and contractors) and facilities, working closely with the team members
• Participates in project meeting with Project team members and stakeholders to note on project specifications and report on the status of the work progress
• Liaises closely with HSE department and subcontractors for proper on-site coordination, working with QA/QC team members, owners, statutory and classification authorities on inspection arrangement and compliance review
• Maintains the equipment/ machineries at the workshop and on-board, ensuring the proper working condition, timely calibration, repair, or servicing as required
• Understands emerging engineering practices by participating in educational opportunities, professional organisations; reading professional publications and maintaining personal networks
• Recommends changes to work method/ process by reviewing the workflow and work process to implement changes for improvement and to achieve operational effectiveness and functionality

Requirements:

• Bachelor’s degree in Mechanical Engineering/ Marine Engineering or related engineering disciplines
• Entry Level candidates are welcome to apply (On Job Training will be provided)
• Excellent proficiency in English (written and spoken)
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Good in planning, organizing, and interpersonal skills and able to work independently

Working hours & locations:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide Transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description:

1. Design, build, and deploy back/front end software applications using C# and Typescript (or JS).
2. Employ LINQ for data interaction and process optimization.
3. Oversee Microsoft SQL databases, carry out SQL programming tasks, and enhance system performance.
4. Engage in all stages of the Software Development Life Cycle (SDLC), including requirement gathering, design, coding, testing, deployment, and maintenance.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers

Requirements:

• Bachelor’s Degree in Computer Science, Information Technology or Mechatronics or equivalent
• Demonstrable experience (at least 2 years) in software development.
• Profound knowledge of C#, LINQ, and Angular. Experience with Microsoft SQL database programming using Entity Framework & SignalR.
• Acquaintance with the Software Development Life Cycle (SDLC).
• Familiarity with OPC-UA and Industrial 4.0 technologies is advantageous.
• Exceptional problem-solving abilities and meticulous attention to detail.
• Excellent communication skills and a strong team player.

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

We are seeking talented R&D Engineer to assist with the design and customization of our new/existing Vertical milling machine portfolio. In this role, you will be working closely with the R&D team to create functional design concepts, validate designs, and follow through from design stage to production.

Responsibilities:

• Developing new products and introducing innovative designs for our existing product series.
• Crafting customized machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating Pneumatic, Hydraulic, Servo-electric, and Sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

Requirements:

• Bachelor's Degree in Mechanical Engineering from a reputable university.
• Passion for Product design.
• Excellent Problem-solving skills and able to work hands-on.
• Effective team player who is creative, meticulous, independent and responsible.
• Familiar in 3D modelling software such as SolidWorks and Simulation tools will be an advantage.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Description:

1. Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
2. Perform electrical and Instrumentation troubleshooting.
3. Able to work and trouble shoot with AC low voltage single phase and 3 phase systems.
4. Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
5. Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
6. Experience in 3 phase generator control interfacing to grid power.
7. Liaise with PE and organize preventive maintenance for MV and high voltage (22Kva).
8. Understand and develop electrical panel schematics if needed.
9. Guide technician on troubleshooting part if needed for ACMV, CCTV, Access control system, PA system, power and lighting.
10. Update and control of Electrical specification, procedure and drawings
11. Material Management including consumables, parts and spare unit
12. Responding to breakdowns, diagnosing faults, record and report.
13. Review and approve of service, repair and overhaul equipment, record and report.
14. Managing routine 5S at the maintenance workshop, store and work area at site.
15. Communicate with clients, consultants, project personnel and relevant authorities.

Job Requirements:

1. Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
2. At least 3 years of experience in electrical engineering in chemical, petrochemical, pharmaceutical and power plant operations.
3. Strong Electrical Knowledge.
4. Results oriented individual with robust technical abilities.Able to work independently and in a team.
5. Possession of LEW is an advantage.
6. Knowledge of preventative maintenance systems and their administration.
7. Knowledge of Maintenance and Asset Management is an advantage.

Others:

1. Working hours: Monday to Friday (8am to 5pm)
2. Company Transport / Transport Allowance $120 if candidate possess own vehicle to work
3. Sign-On Bonus

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 8-12 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are currently recruiting for experienced Senior Engineer – Mechanical (Building Services) to join our Building Services team in Singapore.

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

• Leading mechanical services (HVAC) design for building projects
• Assume responsibility and undertake engineering tasks of increasing scope and complexity
• Responsible for analysis of information, production of design, tenders, proposals and technical report writing
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• In charge of jobs control, planning, monitoring, progress and job cost reporting
• Communicate effectively with the client, sub-consultants, contractors, and other parties relevant to the job
• Assist in assessment and review of designs prepared by others on behalf of the clients
• Liaise with authorities on plans submission and compliance

Pre-Requisites

• Degree in Mechanical Engineering
• At least 5 years experiences in consulting firm
• Leading roles experience in ventilation & air-conditioning (HVAC, Plumbing & Drainage) design & design management of commercial, healthcare or school projects will be an advantage
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style

Job Highlights

• Career Advancement
• Medical & Telecommunication Allowance
• AWS, Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and professional development opportunities along with a supportive and caring work environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply online now with your CV.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

1. Degree in Building/Construction Studies/Civil & Structural Engineering/Geological Science or equivalent

2. Ensure full adherence to company policies on-site, particularly health and safety standards

3. Able to manage and control workers and monitor their work closely

4. Attend project site meetings with the clients, consultants, sub-contractors, suppliers, authorities, etc. and to ensure the smooth progress of the project

5. Supervise the collection of soil and rock samples and instrument installation works

6. Prepare reports from fieldwork eg. Borelogs, installation records and daily journals

7. Co-ordinating with materials suppliers and managing the delivery, quality and installation of materials

• MEP Contractor
• Basic up to $5000
• Office hour 6 days
• Bus from MRT Pioneer

Job Responsibilities:

• Oversee quality checks for incoming, in-process, and outgoing products, ensuring adherence to inspection criteria, quality plans, and finishing work per method statements.
• Work with QA, Process, Engineering, and Product teams to address quality issues, perform audits, and implement corrective actions.
• Manage and control supplier quality standards, ensuring compliance with required specifications.
• Prepare inspection reports, coordinate site visits, and liaise with Project Managers, Engineers, and Authorities for certifications.
• Provide training to workers on method statements and ensure compliance with construction and quality standards.

Job Requirements:

• Minimum ITE, Diploma, or Degree in Manufacturing or Quality Engineering.
• Preferably at least 2 years of experience in a Product Manufacturing environment.
• Knowledge of ISO standards (9001, 14001, 13485, 45001) is a plus.
• Understanding of quality requirement of DMA Modular Prefab MEP product, Materials Selection, Fabrication, Assembly and Inspection will be an advantage.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

Job Description:

• Familiarization of ASME / API Codes & Standards, DNV Rules
• Proven experience of providing solutions on NDT inspection related problems
• Responsible for company NDT management and controls
• Responsible for trouble shot problems related to NDT
• Provide internal training technical guidance to QC Inspectors
• Develop/Review/approve NDT procedures, NDT techniques complying with project/code/regulatory requirements. Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval
• Monitor the performance of NDT personnel through system of review of qualification, competency assessment, Cross checks and reports review
• Risk assessment of NDT works and lead the risk assessment process of NDT in the yard
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about NDT requirements
• Co-ordinate with NDT contractors to develop and update their individual competency matrix
• Maintain all NDT personnel qualification records and update from time to time.
• Keep a copy of all NDT contractors’ certificates
• Review NDT operator qualification and submit for project approval
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing
• Perform Audit on NDT contractors to ensure compliance with project requirements
• Witness & provide technical guidance on standard PAUT validations
• Provide technical support for inspection auditing activities and provide effective audit programming for companywide NDT activities
• Reviewing and commenting on standards, specifications, and enquiries
• Work as part of a team to ensure all regulatory, quality and customer requirements are met
• Verify NDT reports for project requirements compliance
• Creative problem solving - able to suggest and develop new methods and ways of working
• Sound communication skills – able to communicate ideas and results to various stakeholders both in written reports and in meetings, presentations etc
• Understanding of clients’ needs and ability to suggest and apply “fit for purpose” solutions
• Willingness to be flexible and multi-task as part of a team, and contribute to company objectives

Job Requirement:

• Bachelor’s degree in Mechanical Engineering / Master Degree in NDT
• Minimum 5 years experience in fabrication environment as NDT Level III
• ASNT/PCN Level III qualification in UT/RT/MT/PT/ CSWIP (PAUT)

Position Summary

• Able to do engineering and design for Fire and Gas detection and suppression systems in accordance with international standards (e.g. NFPA) and project specifications.
• Provides daily technical support to instrument and electrical technicians and supervisors during installation.

Tasks and Responsibilities

• Involved in Fire Alarm Detection System Design and installation.
• Involved in Gas Detection Design and installation.
• Involved in Fire Suppression design and installation.
• Involved in preparing Intrinsically Safe calculation for Instruments.
• Involved in HVAC design control philosophy and instrumentation
• Involved in preparing mapping list for interface to customer.
• Involved in preparing bill of materials and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Involve in monitor the progress of the document submission.
• Some drafting scope and also guide drafters for drafting.

Job Requirements

• Good communication skills in English both written & spoken.
• Must know basic fire alarm detection system.
• Must know gas detection system.
• Must know HVAC instrumentation.
• Must know PLC logic.
• Have knowledge in basic electrical design.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Willing to travel to Batam