The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• Become the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Se expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Materials / Material Sciences Engineering
• Min 5 years of relevant work experience in Photo Equipment (Track) in semiconductor industry
• Excellent communication, interpersonal and leadership skills
• Strong analytical skill and able to work under pressure in fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, Power BI

Job Purpose

• Support and contribute in driving best-in-class yield and defectivity performance

Job Description:

• New/mass production yield analysis and improvement
• Product yield abnormalities systematic analysis and solutioning
• Work with modules, Integration & QRA, etc to solve product technical issues
• Product yield target goal setting and forecast
• Participate in new process development and production ramp
• Product yield improvement and related customer request support
• Wafer return electrical and physical failure analysis

Job Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Min 5 years of relevant work experience in modules/Process Integration/Product Engineering
• Possess strong analytical skills, usage experience in ACEXP / JMP /Minitab
• An excellent team player with good interpersonal, communication and written skills
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

What you will do

• Customer support responsibilities, ensuring timely and effective resolution of customer inquiries and issues
• Project management involvement, including planning, execution, and delivery
• Support marketing promotion activities to enhance product visibility and market presence
• Engage in clear and effective communication with customers to address their needs and concerns
• Aid in debugging and testing to ensure product quality and reliability

Required Skills

• Excellent proficiency in English and Mandarin, both written and verbal, to liaise with our affiliates from different regions.
• Preferred experience in display or scalar-related technologies
• Strong communication skills, with the ability to effectively convey technical concepts
• Desirable capability in system integration to facilitate seamless collaboration across different components and subsystems

Location: One North, Singapore

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will collaborate with various project managers, solutions architect and infra engineers to deliver leading-edge digital solutions and services to meet the business requirements of the maritime community. You are pro-active, self-motivated and resourceful team member with good technical or digital knowledge and possess strong influencing and people handling skills. You are constantly looking at new ways to apply digital technologies to meet business needs and can handle multiple projects concurrently.

Key Responsibilities

1. Design, build and maintain the software development pipeline automation with related toolsets to enable CI/CD

2. Design and implement the infrastructure and operating environment for container-based microservices that will meet the agreed high availability, performance and security requirements

3. Utilise native cloud tools to monitor the health and performance of the production and UAT environments, and automate the alerts as part of the incident reporting framework

4. Work closely with development teams and other internal teams to ensure that solutions are designed in accordance to requirements to facilitate scale/performance, security and operability

5. Work closely with on-site Tenant Facility Management (TFM) team to supervise day-to-day cloud operations which include activities such as regular patching and system configuration

6. Support and ensure that the software releases are aligned with MPA's internal software release and deployment process

7. Facilitate and support troubleshooting or root cause analysis of platform issues or incidents

8. Proactively monitor and identify opportunities for automation, process improvement and architecture simplification

9. Participate in project planning and management activities

10. Research and develop prototype using relevant technologies and trends for continuous improvement of the platform

Requirements

1. Background in IT/Computer Science/Computer Engineering or relevant discipline

2. At least 2 to 3 years of working experience in DevOps automation, containerisation and orchestration

3. Strong knowledge and experience in Microsoft Azure and/or Amazon Web Services and related cloud services (e.g. Azure DevOps, hands-on experience using Azure Administrative portal). Certification(s) in Microsoft Azure (e.g. MCSE: Cloud Platform and Infrastructure or equivalent) and Amazon Web Services will be an advantage.

4. Strong knowledge and experience in software development automation tools

5. Strong scripting skills (e.g. powershell, cli, python)

6. Strong understanding and experience in virtualisation and networking in a container environment such as Kubernetes, Docker

7. Strong understanding of cloud computing/container deployment and management

8. Strong understanding and practice of Agile projects (e.g. SCRUM)

9. Experience in working with Government Commercial Cloud is preferred.

The Site Engineer (Building) is responsible for assisting on the progress of site works and manpower related aspects of the project.

The responsibilities of this position are, and not limited to, as follows:

• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering
• Experience: Prior 3 years experience in building projects

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes. Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses.

Accountabilities:

• Understand the customer’s network structure and become familiar with the Customer’s network implementation and support processes and procedures to ensure supporting a network with proper SLAs.
• Carry out migrations of existing setup, features, and configuration as required by the customer in a production/testing environment and help improve plans to implement new features to increase the network stability or user requirements.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Raise equipment Return Material Authorizations (RMA’s) and to track till problem resolution and produce incident report for any severity issues that was reported by customers or end users.
• Be available for customers’ questions in assisting their needs to support network related issues and monitor customer network leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.
• Perform the wireless testing across customer’s different locations and identifying or fixing if there are any performance issues or slowness in network for wireless users.
• Identify the principal vendor best practices and only perform changes with customer approval to improve the security levels.
• Co-ordinate between his/her own Global Network Centre for any escalations or major issues and bridge between customer / senior resources / vendor / etc

The Individual and their Experience:

• Minimum 2-3 years of relevant experiences in network operations including wireless technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA certified plus any other networking certifications preferred
• Basic understanding about Routing / switching protocols.
• In-depth knowledge on Stacking / L2 technologies / STP / IP Addressing.
• Proficient at performing local / remote IOS upgrades on different products and RMAs for faulty devices in production
• Good understanding about different monitoring tools like Cisco PI / PRTG / Spectrum / Syslog / etc and TCP/IP structure and IP scheme
• Strong knowledge on Wireless / ARP / MAC / L2 loops / Switching.
• Understand DNS / DHCP / Security knowledge is an added advantage.
• Eagerness and willingness to pick up & adapt new technologies and automation.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will be involved in the requirements gathering, development and testing of products as per evolving business needs as part of the end-to-end agile development lifecycle starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Participate in the requirements gathering sessions and contribute to the development of the functional/design specifications

2. Design algorithms and flowcharts to create new software programs and systems

3. Develop clean, efficient and extendable codes using HTML/CSS, Javascript, Java, .NET, React Native and other relevant programming languages.

4. Troubleshooting, debugging, maintaining and improving existing software

5. Perform code reviews and functional testing to ensure that standards are upheld.

6. Continuous review and refactoring code for reusability and reduce technical debt.

7. Work with QA Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

8. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively

9. Maintain and update library of reusable APIs, components and modules

10. Develop technical documentation to guide future software development projects

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as HTML/CSS, Javascript, Java, AngularJS, Bootstrap or other relevant programming languages

3. Participated in at least one full software or product development cycle, preferably using Agile Methodology

4. Excellent communication skills

5. Teamwork and collaboration skills

6. Possess critical thinking and problem-solving skills

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• MIn 3 years QAQC experiences in building projects.
• Detail-oriented and have strong communication skills and able to work with people from all levels.

Dependable Solutions Partner Pte Ltd

· We are a well-established growing company, ready for the next phase of expansion.

· We offer a work culture where everyone wins as a team, through trust, support and respect.

Responsibilities

• Responsible for the overall, coordination, implementation and execution of projects ensuring consistency with company commitments and goals

• Good organisation and time management skill, able to work independently with minimum supervision

• Perform project co-ordination works between client, suppliers and sub-contractor pre and post project implementation

• Monitor and report the progress of the projects to all stakeholders

• Able to work under tight deadlines

Main Duties:

• Oversee the construction activities and progress, plan, implement and monitor work
• Schedule in accordance to the master and detailed work program
• Liaise with Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle of technical and engineering problems
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep site safer and neat
• Supervise ongoing site activities closely

• 
  
• To be involved in the planning and designing of civil and structural engineering works
• To prepare the design and technical specifications for tenders; as well as tender documents for the bidding of civil and structural engineering projects
• To supervise in the civil and structural works
• To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients
• Any ad-hoc duties as per assigned

1) At least two years working experience

2) Able to use engineering software Staad pro, SAFE, Plaxis

3) Able to work independently under the guidance of senior / principle engineer

Job Description:

• Prepare project proposals & review, and seeking for approvals. Management team and Team Leaders will provide guidance. project team, management and customers.
• Work closely with business team to handle customers. Support business team for any escalations from customers.
• Organize and ensure key project milestones are achieved, eg Design Review, Factory Acceptance Test, Site Acceptance Test, etc…
• Closely monitor progress with project Gantt chart, budget and scope of work. Resolve conflicts, remove impediments, and foster positive work environment for project team.
• Manage and maintain project documents and artefacts.
• Manage and facilitate productization of projects with manufacturing and aftersales team.

Requirements:

• Min Bachelor’s Degree, preferably in an engineering field
• Knowledge in financial accounting, systems engineering, alternative and/or clean energy is advantageous
• Proficient with MS Project or similar, MS Office Suite of tools
• Fluent in English and writing skill of clear and concise reports
• Excellent communication skill, patient and precise
• Proactive team player, also able to work independently
• Motivate others and yourself

Job Description & Requirements

1. Preparation of shop drawing

2. Preparation and submission of necessary document prior to start boring work

3. Supervise in confirmation of soil boring and rock caring. And submissio0n of pile length calculation (if required)

4. Co-ordination with main contractor and consultant’s representative.

5. Preparation and submission of bored pile installation record

6. Supervise and arrange the site team & progress thereafter report to project manager

7. Preparation of bored pile summary and submit to main contractor and HQ

8. Submission of as built pile penetration and eccentricity drawing

9. Receiving the time to time instruction of project manager

Summary

Equipment Engineer is responsible for the installation, troubleshooting and maintenance of production equipment.

Responsibilities

• Initiate meeting within the team or with cross functional counterparts to resolve complex integration issues and chronic hardware issues.
• Manage and plan new equipment start-up to support production, from facilities hook-up, vendor startup, to acceptance of equipment for production.
• Establish Preventive Maintenance (PM) plans for all equipment taking into account safety and optimize PM for quality, cost, and productivity. Including spare review, planning, budgeting and tracking.
• Establish and document work process and conduct self-audit to ensure specifications meet company Quality Standard requirements.
• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Any other ad-hoc duties as assigned.

Requirement

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics Engineering
• Hands-on experience in equipment maintenance or troubleshooting
• Experience in a semiconductor/electronics/electrical manufacturing industry preferred
• Fresh graduates are welcome to apply

Key Responsibilities:

• Project Management including project scheduling, execution and handling over of commissioned system
• Project lead and ensure smooth deployment
• Top monitor project resources, budget, schedule and scope of work
• Provide technical expertise on site to troubleshoot and propose the best solution for our clients
• Conduct preventive maintenance to ensure optimal performance of equipment.
• Propose and recommend improvement projects to clients to upgrade existing equipment performance.
• Attend to site installation, equipment breakdown and servicing, and emergency requests from client
• Collaborate with cross-functional teams to deliver exceptional after-sales support to our clients
• Utilize your technical know-how to identify, diagnose and repair complex issues efficiently.
• Other ad-hoc duties

Qualifications:

• Must possess a minimum Diploma in Engineering (Mechanical / Electrical / Automation) or equivalent.
• Minimum 3 years relevant experience required and knowledge related to electromechanical control & automation.
• Programming skills and understanding in PLC & Robotic Control.
• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Travel, often on short notice, to customer sites to resolve problems or support other team members.
• With class 3 driving license.
• Regional travel experience.

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

• Provide technical support, maintenance and servicing/repairing of equipment, instruments and systems at site.

• Perform on-site installation and setup of equipment and systems with strong competent skills.

• Assist devices checking, technical demo, testing & training for customers.

• Checking technical specification, documentation and drawings plus prewire.

• Understand application process flow, to provide service to users by promptly responding to their queries, with necessary evaluation and prioritization.

Primary Considerations:

1) PR/Singaporean

2) Diploma in Electrical Enginer, at least

Secondary Consideration:

1) BCCPE cert

Job Position:- Resident Engineer (M&E)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Mechanical or Electrical Engineering or equivalent.
• Possess at least 8 years of relevant and practical experience on site;

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local mechanical & electrical codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Job Description:

• Architect and lead the development of high-performance, user-centric iOS applications.
• Serve as a technical authority, providing guidance and expertise across projects.
• Collaborate with stakeholders to define technical roadmaps and strategies.
• Ensure application reliability, scalability, and maintainability.
• Conduct deep code reviews and maintain high-quality standards.
• Stay updated with emerging technologies and drive their adoption.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• 7+ years of experience in iOS development, with experience in leading large-scale projects.
• Mastery of Swift, Objective-C, and iOS development frameworks.
• Extensive experience with performance optimization and profiling tools.
• Advanced knowledge of mobile security standards and practices.
• Proven experience in mentoring senior engineers and influencing technical direction.
• Strong strategic thinking and problem-solving skills.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You will be responsible to oversee the development, operation and management of the chemical analysis lab, ensuring precision and compliance with industry standards while optimizing analytical methodologies and supervising staff.

Key Responsibilities:

• Create and manage the operation system for the chemical laboratory to ensure compliance with industry

standards and quality requirements.

• Develop and implement advanced analytical methods to meet the fab’s monitoring and analysis needs.

• Optimize processes to enhance the precision and efficiency of chemical analyses.

• Ensure the calibration, validation, and maintenance of laboratory equipment to uphold accuracy and reliability in results.

• Conduct micro-contamination monitoring activities to detect and mitigate issues effectively.

• Provide guidance and supervision to laboratory staff, establishing and achieving annual performance goals.

Education Qualification & Essential Experiences:

• Bachelor’s degree or higher in Electronics, Electrical Engineering, Physics, or a related technical field.
• Minimum of 3 years of relevant experience in semiconductor Chemical Analyst engineering.
• Strong problem-solving skills and a detail-oriented approach with the ability to analyse complex data and derive insights.

Personal Attributes:

• Excellent coordination and communication skills, with the ability to work independently and manage multiple tasks effectively in a fast-paced environment.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.es.

Summary:

Thales Singapore Engineering Competence Centre (ECC) is a well-established R&D and engineering centre serving major customers worldwide in Digital Identity and Security domains ranging from mobile connectivity, IoT, banking & payment to government solutions.

You will join the 'Thales Gemalto Digital First' project team to push forward the vision of 'Banking as a Service', combining card digitization, onboarding and risk evaluation platforms all in one for financial institutions to deliver optimized mobile-first experience for their customers.

You will be part of the driving force of our DevSecOps transformation, where we envision multiple teams working together on the same code base allowing full autonomy in solving problems presented by our customers.

Responsibilities:

• Implement solutions using Gitlab as a platform for source code, continuous integration and deployment
• Implement frontend component to provide generic secure services and cloud solution
• Be responsible for development/testing/deployment for the overall solution
• Participate in the design, implementation, maintenance, validation and documentation within a Scrum Team.
• Ensure quality metrics are met in terms of performance, scalability, maintainability, reliability.

Requirements:

• Minimum 5 years of relevant work experience in either JavaScript and TypeScript
• Knowledge on Java, version control system (Mercurial/GIT), build system (Jenkins/GITLAB)
• Familiar with agile methodology (Scrum)
• Understand the concept of DevSecOps
• Motivated self-starter, strong logical, creative problem-solving skills and excellent analytical skills
• Knowledge in Kubernetes, Splunk, DataDog is a plus
• Knowledge in Docker, NoSQL (DynamoDB/MongoDB), MySQL is a plus

Other information:

• Working Location: One North
• Working Hours: Monday - Friday, 9am - 6pm

• Involve revese enginnering based on part given.
• Create the part drawing from the component by measuring and prepare the new cnc program.
• Lead a programmer and machinist to successfully deliver the cam program for precision machined component projects
• Work closely with senior management to prepare quotation and concept dedign for new projects
• Prepare and track schedules for live projects - manage deliverables targets by designers and drafters
• Train and groom new Cnc 3d cam programmer / machinist in company
• Create, maintain and enforce workflow processes to enhance design department efficiency
• Manage team KPIs

Pre-Sales Solution Engineer

Our Sales team is the driving force behind our company's growth, handling the entire sales cycle from prospecting and business development to expanding our services with existing clients through effective account management. We pride ourselves on our dynamic, fast-paced, and multicultural environment, where ambition and innovation thrive.

What is the role about?

We are now searching for an experienced Pre-Sales Solution Engineer to provide technical knowledge, advice, and support to sales representatives and customers during the sales process to resolve requests regarding products and technical issues and to maximize the benefits derived from the organizations’ products and or services.

Key responsibilities:

• Provides presales technical expertise to the Product teams and customers.
• Provides technical input into projects and technical documents and identifies additional sales opportunities with existing customers.
• Installs and demonstrates the products at customer sites.
• Collaborates with product teams to develop and recommend products and services to meet customer’s requirements.
• Assist customers to identify their technical specifications and determine what documentation is required to incorporate the organization’s products into customer applications.
• Maintains up-to-date and comprehensive knowledge of the organizations and competitor’s products and/or services.
• Writes blogs, white papers, and other technical material to promote the products and technical capability of the company.
• Helps the customer, if needed, in the implementation of the new products and makes sure the defined specifications are in place and helps implementing them.

Who are you?

• 7 - 10 years of Technical Solution experience within IT (mainly Cloud)
• BA/BS degree in Business Administration, Sales, or a relevant field
• Experience in the IT Industry (IaaS)
• Experience in writing blogs, attending events, and making presentations.
• Experience working cross-functionally with internal and external stakeholders.
• Fluency in English and one Asian language (both, verbally and in writing) to liase with stakeholders in the region.
• SAP experience is a plus.

Benefits:

• Competitive salary + AWS + annual bonus scheme
• The possibility to develop yourself and build your career
• Comprehensive Health Insurance
• 18 days paid time off
• Multi-cultural work environment (our colleagues are from over 60 countries!) in a company where you can truly make a difference

Ready for the next step?

If you’d like to apply, please do so online. To learn more about us, follow us on LinkedIn or Instagram to get an inside look at life at Leaseweb. For questions, please reach out to Danisha Ardilla, Talent Acquisition Specialist, at: [email protected]