(A) Essential Job Functions:

The Senior C&S Engineer is responsible, but not limited to, the following:

• Liaise with consultants for technical issues and coordinate the site activities with subcontractors
• Civil & structure design, analysis, and assessment for foundation, excavation, earth retaining structures, slope, instrumentation, and site investigation.
• Conduct inspections and checks on work performed by subcontractors
• Assist in the planning and sequencing of the construction operations.
• Prepare project-related reports and method statement for submission.
• Any ad-hoc duties assigned by supervisor.

(B) Minimum Qualifications/ Job Experience:

• Minimum 8 years of engineering experience in construction industry with Degree in Civil Engineering recognised by the PE Board or qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer or recognised Degree in the relevant field subject to the acceptance of the SO.
• At least 5 years of experience in the construction supervision for projects of similar scale, complexity and nature of work.
• Experience in MRT/LTA projects is a definite advantage.
• Prior experience in working in construction site preferred, especially in Civil Projects.
• Work location at Project site office.

(C) Knowledge/ Skills/ Abilities:

• Working knowledge of general construction knowledge, especially in Civil Projects.
• Good verbal and written communication skills.
• Strong organizational and interpersonal skills.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/projects at one time.
• Ability to analyse and synthesize complex issues quickly.
• Able to work overtime and be on standby when required.

Responsibilities:

• Responsible for Mechanical & Electrical systems which include electrical, drainage or fire protection
• Manage facility operation by implementing preventive and corrective maintenance work
• Provide advisory and recommendation on corrective measures to be taken from maintenance work
• Oversee, manage, and provide technical guidance to a team of technical officer and technician on facilities maintenance
• Ensure all work are carried out in accordance with the safety regulation and procedure
• Investigate and determine root cause of faults and report

Requirements:

• Degree in Mechanical/ Electrical Engineering / Facility Management or discipline with minimum 3 years’ experience; or Diploma/ NITEC in Mechanical/Electrical Engineering/ Facility Management discipline with minimum 5 years of relevant experience
• Possess strong knowledge in M&E maintenance
• Possess Fire Safety Manager certificate will be an added advantage

Engineer

Report to Project Manager , the engineer has the following responsibilities :

· Assist the project manager in project planning , all on-site technical / engineering matter and authority submissions

· Assist the project manager in managing and implementing the quality , environmental, health and safety (QEHS) management system of PIKASA BUILDERS PTE LTD on site.

· Supervise and monitor projects are carried out in accordance to operating procedures , quality standards and contractual specifications

· Monitor progress of works and site activities to ensure adherence to project timeline

· Conduct on site investigations and analyze data ( maps, reports, test, drawing etc)

· Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications

· Responsible for all inspection activities carried out at work site

· To update all structural / architectural and M&E progress with scheduling tools

· To prepare and submit shop drawing / material /MOS monthly progress claims and PM report

· To analyze customer complaints and provide advise and resolve problems creatively.

Requirement and Skills

Possess a Bachelor Degree in Civil or Structural Engineering

Proficient in MS Office , Auto Cad

Good analytical, supervision and communication skills

5 years of experience in Building Engineering projects including New Build

Experienced in LTA project is an advantage

Job Summary:

• Great Career Prospect
• 5 Days / Shift Work
• Islandwide Hiring

Job Scope:

• Diagnose and resolve hardware and software issues related to IT devices.
• Provide technical support services, including troubleshooting, patching, configuration, testing, and maintenance for supported hardware and software.
• Monitor, evaluating and establishing system performance specifications.
• Install and configure personal computers, laptops, servers, and other IT hardware.
• Provide training to colleague and collaborate with 3rd party vendors.
• Perform regular system checks and maintenance to prevent hardware failures.

Job Requirements:

• Nitec in Computer Science/IT Engineering or equivalent.
• No experience are welcome to apply!
• Candidates with internship experience are strongly welcome to apply!
• Candidate who are comfortable with shift work will be an advantage

To Apply, kindly click on the "APPLY NOW" button and job details.
We regret that only shortlisted candidates will be notified.
StaffKing Pte Ltd (20C0358) | Trance Teu (R1988522)

Job Benefits:

• AWS + VB
• 5-day work
• Opportunities for skill development and career progression

Job Responsibilities:

• Assemble, modify, and rework production components using drawings and process documents.
• Operate and maintain hand tools.
• Support inventory handling, cycle count activities, and material transactions.
• Participate in continuous improvement initiatives and maintain strong teamwork.

Job Requirements:

• Familiarity with hand tools and basic machinery.
• Committed to maintaining high-quality work standards and team collaboration.

Please submit your updated resume in MS Word format via the "Apply Now" button.

We regret that only shortlisted candidates will be notified.
StaffKing Pte Ltd (20C0358) | Trance Teu (R1988522)

Duties and responsibilities:

1. Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

2. Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

3. Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

4. To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

5. Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

6. Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

7. Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

8. Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

9. To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

10. To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

11. To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

12. Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

13. To be actively involved with quality management system of the company.

14. Perform any other duties as assigned by higher management or superior.

Job Summary:
We are seeking an experienced and dedicated Senior Site Engineer to join our dynamic team in the construction industry. The Senior Site Engineer will be responsible for overseeing construction projects from inception to completion, ensuring they are completed on time, within budget, and to the highest quality standards. This role requires strong leadership skills, technical expertise, and the ability to effectively manage a team of site engineers, supervisors, and construction workers.

Key Responsibilities:

Project Management:

• Plan, schedule, and coordinate construction activities to meet project deadlines.
• Monitor project progress and adjust schedules and targets as required.
• Ensure all work is completed in accordance with specifications, codes, and standards.

Site Supervision:

• Oversee daily site operations, ensuring compliance with safety regulations and quality standards.
• Conduct regular site inspections and resolve any issues or conflicts that arise.
• Liaise with contractors, suppliers, and other stakeholders to ensure smooth project execution.

Technical Guidance:

• Provide technical support and guidance to site engineers and construction teams.
• Review and interpret construction drawings, plans, and specifications.
• Ensure accurate implementation of construction designs and plans.

Quality Control:

• Implemen and monitor quality control procedures to ensure the highest standards of construction.
• Conduct regular inspections and testing of materials and workmanship.
• Address any non-conformance issues promptly and effectively.

Budget and Cost Control:

• Prepare and manage project budgets, ensuring cost-effective utilization of resources.
• Monitor and control project expenses to ensure adherence to budget constraints.
• Report on financial performance and progress to senior management.

Health and Safety:

• Promote and enforce a strong safety culture on site.
• Ensure compliance with all health and safety regulations and standards.
• Conduct regular safety audits and implement corrective actions as needed.

Communication and Coordination:

• Serve as the main point of contact for clients, consultants, and subcontractors.
• Facilitate effective communication between all project stakeholders.
• Prepare and present project reports, progress updates, and documentation.

Qualifications Education:

• Bachelor’s degree in Civil Engineering, Construction Management, or a related field.

Experience:

• Minimum of 7-10 years of experience in the construction industry, with at least 3 years in a senior supervisory role.
• Proven track record of successfully managing large-scale construction projects.

Skills:

• Strong leadership and team management skills.
• Excellent problem-solving and decision-making abilities.
• Proficiency in project management software and tools.
• In-depth knowledge of construction methods, materials, and regulations.
• Strong communication and interpersonal skills.

Certifications:

• Professional Engineer (PE) license or equivalent certification is preferred.
• Safety management certifications (e.g., WSQ) are an advantage.

Working Conditions:

• Full-time position based on-site with occasional office work.
• Willingness to work extended hours and weekends as required to meet project deadlines.
• Ability to work in a fast-paced, high-pressure environment.

Koizumi Lighting Singapore Pte Ltd

An established Japanese lighting manufacturer.

In Singapore, we specialise in turnkey projects.

The role and responsibilities include, but are not limited to,

• To examine tender documents and the scope of work, then prepare Tender submission.
• To examine client’s requirements and the scope of work, then prepare quotation.
• To review, compare, analyse products and services to propose.
• To propose alternative products, as and where required.
• To prepare technical specifications.
• To maintain and update supplier information, and liaise on product ranges, prices, delivery times, etc.
• To do project management/co-ordination
• To assist with project documentations
• Any other ad hoc duties assigned by Manager.

Job Requirement

• Min. Diploma in Electrical / Electronic / Mechanical Engineering
• Min. 1 years’ experience as Assistant Engineer in construction industry
• Motivated to work in challenging, fast paced and result-driven environment
• Good communication and interpersonal skills
• Knowledge of lighting an advantage
• Knowledge of software an advantage, eg. Autocad, Photoshop, Dialux

Product training will be provided

Airconditioning Engineers

1) Ability to lead and manage teams

2) Operation Supports to teams and clients

3) Self Motivated Individuals

4) Good Team Player

5) Experienece In Troubleshooting and Repair / Service of Split Type and VRF/ VRV systems

6) Valid Class 3 License

7) Minimum 5 years experience in Airconditioning Field

8) Possess field experience is a MUST

9) Strong troubleshooting and analytical skills

10) Prior experience working in MNCs Agent will be an advantage (I.E. Daikin, Mitsubishi, Toshiba)

Job description for Software Engineer

- Build prototypes to demonstrate technology opportunities - Design system architectures - Write production quality code - Manage deployments to cloud and (occasionally) on-premise infrastructure - Learn and share knowledge in a multi-disciplinary team

What we look out for

- Experience with modern web applications in JavaScript (ES 5/6) is a must-have - Experience in creation/maintenance of APIs using Node.js is highly advantageous - Experience in front-end development with React.js is highly advantageous - Experience in automated testing using JavaScript testing frameworks/libraries such as Karma, Mocha, Chai and Sinon is highly advantageous. - Experience with database management/usage (both relational and non-relational), and handling of data in different environments is highly advantageous. - Experience in feature testing using a Selenium-based framework is a nice bonus. - Experience in tooling processes for modern web applications using Webpack and Gulp is a nice bonus. - Experience in using Docker containers, development of CI/CD pipelines, and deployment using cloud services such as AWS/PasSes/your own private servers is a nice bonus. - Experience in the software development lifecycle in an Agile context is a plus point. - Experience in Scrum is a plus point. - Passion for creating products - Keen sense of learning and self discovery - Willingness and capability to impart knowledge - High level of self awareness - Ability to self manage - Growth mindset - Minimum 2 years experience (or equivalent level of skill/confidence) with modern web applications using JavaScript.

Job Description

1. Establish action plan for all sales promotions
2. Drive sales growth through maximization of resources and execution of market segment strategies
3. Secure active customer relation data management within the assigned area
4. Establish / Maintain campaign results report to track progress and impact of marketing initatives and take appropriate actions in case of deviation
5. Achieve sales target set by management in assigned area
6. Assist ASM in supporting channel partners technically
7. Provide market and competitor intelligence on monthly base
8. Monitor customer, competitor activity and gather general market information and feedback to headquarter.
9. Create and maintain strong customer relationship with top notch customer service.

Requirements

• Diploma/Degree in Mechanical / Electronics Engineering
• Minimum 5 years of sales experience in multi-national industrial environment, preferably with wire processing machines, and more than 3 years in sales management
• Good basic understanding in industrial machinery, automation and software
• Excellent communication, presentation, and negotiation skills
• Ability to work independently and as part of a team
• Willingness to travel overseas and visit clients (up to 30% of time)
• Singaporeansa and PR only

Job Summary:

We are seeking an experienced and dedicated Senior Site Engineer to join our dynamic team in the construction industry. The Senior Site Engineer will be responsible for overseeing construction projects from inception to completion, ensuring they are completed on time, within budget, and to the highest quality standards. This role requires strong leadership skills, technical expertise, and the ability to effectively manage a team of site engineers, supervisors, and construction workers.

Key Responsibilities:

Project Management:

• Plan, schedule, and coordinate construction activities to meet project deadlines.
• Monitor project progress and adjust schedules and targets as required.
• Ensure all work is completed in accordance with specifications, codes, and standards.

Site Supervision:

• Oversee daily site operations, ensuring compliance with safety regulations and quality standards.
• Conduct regular site inspections and resolve any issues or conflicts that arise.
• Liaise with contractors, suppliers, and other stakeholders to ensure smooth project execution.

Technical Guidance:

• Provide technical support and guidance to site engineers and construction teams.
• Review and interpret construction drawings, plans, and specifications.
• Ensure accurate implementation of construction designs and plans.

Quality Control:

• Implement and monitor quality control procedures to ensure the highest standards of construction.
• Conduct regular inspections and testing of materials and workmanship.
• Address any non-conformance issues promptly and effectively.

Budget and Cost Control:

• Prepare and manage project budgets, ensuring cost-effective utilization of resources.
• Monitor and control project expenses to ensure adherence to budget constraints.
• Report on financial performance and progress to senior management.

Health and Safety:

• Promote and enforce a strong safety culture on site.
• Ensure compliance with all health and safety regulations and standards.
• Conduct regular safety audits and implement corrective actions as needed.

Communication and Coordination:

• Serve as the main point of contact for clients, consultants, and subcontractors.
• Facilitate effective communication between all project stakeholders.
• Prepare and present project reports, progress updates, and documentation.

Qualifications Education:

• Bachelor’s degree in Civil Engineering, Construction Management, or a related field.

Experience:

• Minimum of 7-10 years of experience in the construction industry, with at least 3 years in a senior supervisory role.
• Proven track record of successfully managing large-scale construction projects.

Skills:

• Strong leadership and team management skills.
• Excellent problem-solving and decision-making abilities.
• Proficiency in project management software and tools.
• In-depth knowledge of construction methods, materials, and regulations.
• Strong communication and interpersonal skills.

Certifications:

• Professional Engineer (PE) license or equivalent certification is preferred.
• Safety management certifications (e.g., WSQ) are an advantage.

Working Conditions:

• Full-time position based on-site with occasional office work.
• Willingness to work extended hours and weekends as required to meet project deadlines.
• Ability to work in a fast-paced, high-pressure environment.

Join our team as an Assistant Field Engineer and contribute to our expertise in smart condition monitoring systems for industries. We are seeking a candidate with specialized technical skills to support our operations as we evolve towards Industry 4.0 and smart IIoT integration.

JOB RESPONSIBILITIES:

• Conduct vibration analysis, in-situ balancing, and laser shaft alignment.
• Perform ultrasound inspection services to assess machinery health.
• Install motor current monitoring and vibration monitoring systems.
• Generate detailed technical and analytical reports.
• Present technical findings and solutions effectively to clients and team members.
• Learn and assist in performing root cause analysis to identify and resolve equipment issues, ensuring minimal downtime and optimal performance.
• Adhere to safety regulations and company policies while working on-site, ensuring a safe working environment for yourself and others.
• Demonstrate experience in work-at-height, confined space, and process plant environments.

JOB QUALIFICATIONS:

• Minimum Diploma in Mechanical Engineering, Computer Science Engineering, Electrical or a related field.
• At least 2 years of relevant experience in vibration analysis, balancing, alignment, and ultrasound inspection.
• Posses a valid Singapore Class 3 Driving License.
• Strong hands-on and practical skills in field operations.
• Strong organizational skills, including multitasking and effective time management, along with a proactive approach to problem-solving.
• Proficiency in Microsoft Office (Word, Excel, PowerPoint) is preferred.
• Demonstrates a strong sense of responsibility and dedication.
• Ability to work independently and collaboratively within a team environment.
• Ability to start work immediately would be an added advantage.

We thank all applicants for your interest, but only those selected for an interview will be contacted.

Job Description

· Lead one or multiple product development, Responsible for mechanical design and overall product specification.

· Study for certain market and industry, provide solutions and proposal for new development.

· Concept design and machines/modules design & develop according to requirement and specification.

· Work with whole team for pneumatic and electrical design and electrical component layout.

· Work together among different parties for product development.

· Lead/guide junior engineers for mechanical design, assembly and detail drawings, BOM and product documentation.

· Evaluate technical specifications of third-party components used for own developments.

· Product continuous development and improvement.

· Communicate with 3rd party or sub-con for contract development if needed.

Education

· Bachelor/Master degree in mechanical/mechatronic engineering or related studies.

Work experience

· >8 years’ experience in mechanical/machine/automation design

Expertise and methodology

· 3D design software experience, such as Autodesk Inventor, SolidWorks, Creo etc.

· Industrial automation knowledge, including motor, pneumatics, sensor, vision, bearing, linear slide etc.

· Understanding fabrication process & materials and know how to control tolerance.

· Calculation capability for standard product selection and machines design.

· Product Lifecycle Management and use of PLM Tools.

· Knowledge of industrial4.0, HMI and IloT.

· Understand product/machine development process and milestone.

· Comprehensive knowledge of MS-Office applications

Other requirement criteria

· Communication skills (verbal and written).

· Social competences to work in cross-cultural and international environment.

· Open mind and positive attuited.

· Can handle certain pressure and meet product development milestone.

· Fluent in English and Mandarin, others language is an advantage.

EmiNET, www.eminet.com.sg

EmiNET is a regional Managed Service Provider in IT, networking, wireless infrastructure, Cybersecurity, Cloud/System/Storage. HQ in Singapore with subsidiaries in Malaysia, Indonesia, Thailand and Vietnam.

We are a strategic partner and reseller of Aruba, Alcatel-Lucent, Cisco and Cisco Meraki, Dell, HPE, Huawei, Lenovo, Microsoft, Palo Alto, Ruckus, Sophos, Symantec, Veeam, Veritas...

EmiNET is expanding its business in Singapore and regionally and is looking for energetic and committed candidates to join us.

Eminet is Aruba PLATINUM Partner and Huawei GOLD Partner

Senior Network Engineer (based in Singapore)

Scope of responsibility

• Pre/post sales design, configuration, technical support on Wireless, Network, Network Security
• Detail network design for data centres, core, distribution, edge networks, network security, WIFI
• Perform site surveys, POC for customers whenever required
• Installation, configuration, commissioning, tech support of Wireless, Networking, Firewall
• Plan improvement and suggest solutions to reduce network faults
• Plan, prioritise and execute planned maintenance on network to support network growth, address software/hardware defects
• Manage and proactively monitor network for optimum network performance
• Service level improvement on Network through design change, monitoring improvement and capacity management
• Monitor and resolve issues related to network
• Responsible for developing and testing new capabilities for wireless, networking, security, and incorporation them into new products for sales
• Provide level 2, Level 3 support

Requirement

• Diploma in Electrical / Electronic / Computer Engineering / Computer Science / Information Systems from a recognized institution
• In-depth Knowledge of wireless, routers, switches architecture
• Minimum 3 years’ hands-on experience in network design, technical configuration & troubleshooting of Huawei, Cisco, or Aruba Data Centre switches, wireless, and Fortinet, Palo Alto Firewalls
• HCIE(Huawei) or CCIE (Cisco) is mandatory requirement.
• Experience in design and configuration of Cisco Nexus switches and ACI
• Good project management, configuration, troubleshooting skills
• Good customer interaction, written and oral communication skills
• Ability to work with all levels, and ability to work and contribute in a team or individually

Attractive salary commensurate with experience. Able to start work immediately with short notice.

Please email your detail resume with current and expected salaries, contact number, and a recent passport-sized photograph to [email protected]

Senior Network Engineer (Ref.No. R1006730)

at our location in Singapore

You will enjoy having this responsibility:

• Design, specify & costing of detailed Network and Infra solution, including
• Interpreting requirement and producing fully detailed & compliant design,
• Interfacing with customer engineer for design definition,
• Interfacing with other system-wide designers for service definition,
• Interfacing with suppliers and vendors for product definition,
• Evaluating and costing of the most suitable products and system.
• During site implementation, testing & commissioning the Network
• Able to lead test engineers to deliver testing activities against stringent timescales.
• Keep track of progress of all design & interface tasks
• Carrying out all assigned work efficiently, with a minimum of supervision,
• Expediting response and deliverables (documents & including engineering drawings, specifications, design reports and calculations, equipment details and other project information).

You have:

• Degree in Electrical / Electronic / Telecommunications Engineering
• Strong advantage on following Professional qualifications
• Cisco Certified Networking Associate (CCNA), Cisco Certified Networking Professional (CCNP), Cisco Certified Design Associate (CCDA)
• Huawei Certified ICT Associate (HCIA), Huawei Certified ICT Professional (HCIP)
• Or other vendor specific courses, such as Juniper Certified Internet Expert (JNCIE);
• Professional knowledge and experience in network detailed design and implementations
• On technologies including SDH, MPLS-TP, IP, IP/MPLS, Ethernet etc,
• Cable network design (fibre, copper, structured cabling),
• 4G/5G/Wifi network design,
• Infra design (Virtualisation, VMWare, Windows, Linux, IT services),
• Cybersecurity implementation (Hardening, FW, AV,…),
• Scripting (python, …),
• Network detailed design, administration, troubleshooting, capacity optimization,
• Network security design and implementation.
• Demonstrating a degree of initiative, and resourcefulness in solving problems.
• Resourceful and analytical in design activities, ability to use pertinent data for meticulous recommendations,
• Making timely & well considered technical decisions, both independently and in concert with others.

1. Site Manning: Provide on-site advice and support to customers.

2. Preventive & Corrective Maintenance: Perform monthly preventive maintenance and ensure proper documentation.

3. Key Performance Indicator (KPI): Meet KPI set for system at customers site.

4. Documentation: Maintain accurate records in the company’s CRM platform.

5. Safety Compliance: Adhere to safety regulations and perform all tasks according to the standard operating procedure.

6. Drug Safety: Ensure zero drug safety incidents during the course of operations.

Job Summary:

• 5 days | Office Hours
• AWS & VB provided
• Attractive Remunration Package

Responsibilities:

• Developing, reviewing, and updating PM/CM procedures, risk assessments, troubleshooting guidelines, and maintenance strategies.
• Planning and executing scheduled maintenance, diagnosing equipment faults, and leading repairs.
• Working on continuous improvement projects to optimize equipment reliability, productivity, and downtime reduction.
• Managing equipment and resource utilization, focusing on OEE to enhance throughput and minimize tool downtime.
• Enforcing maintenance procedures and controls, ensuring work is done hands-on and in compliance with established protocols.
• Collaborating with equipment vendors and suppliers to implement cost-effective maintenance systems.
• Partnering with the process engineering team to develop and refine equipment control procedures.
• Leading equipment installation, setup, and commissioning, ensuring projects are completed on time.
• Driving continuous improvement in OEE, MTBC, MTTR, and PM success rates with the technician team.
• Contributing to safety, quality, cost reduction, and 6S initiatives while maintaining compliance with corporate standards and cleanroom protocols.

Requirements:

• Bachelor’s Degree in Engineering (Mechanical/Mechatronics/Electrical) or equivalent
• Strong Knowledge in semiconductor manufacturing and cleanroom operation industry.
• Strong knowledge and experience in Semiconductor for Etching.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Trance Teu (R1988522)

Job Description

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success, we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.

We are currently looking for Databricks Engineer who has proven track record in IT Industry. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Databricks Engineer

A Databricks Engineer is responsible for migrating from as-is on-perm data warehouse to Databricks and sound
knowledge of Databricks. Requires good understanding of data architecture, cloud solutions, building and maintaining
a robust, integrated, and governed data infrastructure. The role involves extracting valuable insights from data while
ensuring data security, compliance, and high-quality data management.
Roles And Responsibilities:
• Lead end to end data migration project from on-premises environments to Databricks with minimal downtime.
• Work with architects and lead solution design to meet functional and non-functional requirements.
• Hands on experience in Databricks to design and implement the solution on AWS.
• Hands on experience in configuring Databricks clusters, writing Pyspark codes, build CI/CD pipelines for the
deployments.
• Highly experienced in optimization techniques (Zordering, Auto Compaction, vacuuming)
• Process near real time data through Auto Loader, DLT pipelines
• Must have strong background in python and able to identify, communicate and mitigate risks and issues.
• Identify and resolve data-related issues and provide support to ensure data availability and integrity.
• Optimize AWS, Databricks resource usage to control costs while meeting performance and scalability requirements.
• Stay up to date with AWS, Databricks services, and data engineering best practices to recommend and
implement new technologies and techniques.
• Proactively implement engineering methodologies, standards, and leading practices.
Requirements / Qualifications
• Bachelor’s or master’s degree in computer science, data engineering, or a related field.
• Minimum 5 years of experience in data engineering, with expertise in AWS or Azure services, Databricks, and/or
Informatica IDMC.
• Proficiency in programming languages such as Python, Java, or Scala for building data pipelines.
• Evaluate potential technical solutions and make recommendations to resolve data issues especially on
performance assessment for complex data transformations and long running data processes.
• Strong knowledge of SQL and NoSQL databases.
• Familiarity with data modelling and schema design.
• Excellent problem-solving and analytical skills.
• Strong communication and collaboration skills.
• Databricks certifications, and Informatica certifications are a plus.

Preferred Skills:
• Experience with big data technologies like Apache Spark and Hadoop on Databricks.
• Experience in AWS Services focusing on data and architecting.
• Knowledge of containerization and orchestration tools like Docker and Kubernetes.
• Familiarity with data visualization tools like Tableau or Power BI.
• Understanding of DevOps principles for managing and deploying data pipelines.
• Experience with version control systems (e.g., Git) and CI/CD pipelines.
• Knowledge of data governance and data cataloguing tools, especially Informatica IDMC.

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected] Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS:

Consultant Name : Seema Verma

Avensys Consulting Pte Ltd

EA Licence 12C5759

Privacy Statement:

We take your personal data protection seriously and adhere to both EU and local data protction regulations.

Upon submission of your CV, you grant Avensys Consulting permission to retain your personal information in our electronic database, unless you specify otherwise. This data will be used to evaluate your suitability for current and potential job openings within our organization. Should you wish to have your personal data removed at any point, a simple notification to us will suffice.

Rest assured, we will not disclose your personal information to any third parties, and we remain steadfast in our commitment to providing equal opportunities to all applicants.

Job Description

1. To manage turnkey projects that encompasses but not limited to budgeting, liaison with venues and external vendors, setup and teardown and show direction

2. To work closely with the creative team and designers from concept to FA and execution

3. Client servicing

4. Manage project timelines

5. To manage daily administrative work and ensure records are kept up to date

6. Able to travel on very last minute notice

7. Able to commit to long working hours during peak periods

Job Requirements

1. Candidates with no experience are welcome to apply

2. Able to multitask

3. Proficient in MS office

Job Description:

We are seeking a highly experienced Quantity Surveyor (QS) with extensive knowledge of Singapore's tender platforms and submission methods. The successful candidate will play a crucial role in competitive tendering, project management, and client communications, ensuring the smooth delivery of awarded projects.

Key Responsibilities:

Expertise in tender platforms and submission processes, ensuring tenders are accurately quoted and submitted based on company strengths and tender requirements.

Attend tender site briefings, preparing quotations that align with project specifications and client expectations.

Design solutions according to client expectations and ensure they are reflected in tender submissions.

Organize and present post-tender clarification meetings, preparing responses and managing client queries.

Submit required tender documents, including organizational charts and project track records.

Conduct online presentations using PowerPoint and other relevant tools, and manage virtual meetings effectively.

Develop and manage project master programs and independently prepare and submit all required client documentation for awarded projects.

Pre- and post-tender, ensure full compliance with all authority requirements, including NEA, PUB, LTA, MOM, SP, and N-Parks.

Understand project requirements and prepare 3D detailed drawings and space planning using AutoCAD.

Complete assigned work within deadlines, maintaining high standards of quality.

Attend meetings with consultants, main contractors, and site stakeholders to ensure project alignment.

Work independently, showing strong organizational and time management skills.

Requirements:

Extensive QS experience in Singapore, with a strong understanding of tender processes, platforms, and submission methods.

Proficiency in AutoCAD for 3D drawings and space planning.

Strong knowledge of PowerPoint and the ability to handle online meetings and presentations.

Responsibilities

The Technical Support Analyst role is for a StarHub subsidiary. The incumbent will be attached at client's office to coordinate, manage the scope as stated below:

• Hardware break-fix support for business critical systems such as servers, storage, server blades, POS etc.
• Software support for end-user systems, Windows OS, applications
• Desktop/End-User support
• 24/7 Rotational Standby duties for after office hour cases
• Testing and commissioning of replacement equipment to ensure workability of the system
• Updating of tracking system for any parts / service request for traceability of tasks and effort spent
• Inventory verification and preventive maintenance of equipment
• Clone, reimage or installation of Windows OS
• Troubleshoot Windows-based OS issues such as: device driver issues, printer issues, remove Trojan/virus etc.
• End user data migration and PC deployment during hardware refresh
• Quality Assurance testing for hardware equipment including/but not limited to rack mount servers, blade servers, switches and storages, desktops/laptops
• Onsite Staging/Configuration for Servers/Blade System (HP, IBM or Dell)
• Required to take on responsibility of coordinating the installation & setup request from customer
• Attending of project meetings for the commencement of the installation & setup project
• Verification of equipment delivered before start of project to ensure the accuracy
• Testing & commissioning of newly installed equipment to ensure all system functions are met
• UAT & documentation of system installation & setup for customer reference
• Backfill for MOS/MNS contract

Working hour : Follow client's working hours. 5 days work week.

Requirements

• ITE Higher Nitec in Information Technology/Information System/Computer Science. Business IT or other relevant disciplines.
• At least 2 years of desktop support experience
• Possess relevant IT skills set in hardware and software troubleshooting
• Experience installing software, patches, updates on Desktops, Laptops
• Experience in supporting Windows OS, Microsoft Office Suite, and Anti-virus software
• Must be customer-service oriented with good interpersonal and communication skills
• Good attitude with positive mindset in learning and ready to excel
• Able to work independently as well as in a team

MKS is committed to being the highest quality and reliability provider of laser-based manufacturing systems for leading electronics and device manufacturers world-wide; helping them to optimize production of the materials, components and systems that are an integral part of the electronic devices in use today.

As part of the mission, we are seeking an experienced Quality Assurance Engineer to work in our Singapore Laser Manufacturing facility in Kaki-Bukit, Singapore who can drive improvements in the quality and reliability of fiber based and solid-state laser products and production processes. This role will have responsibility for developing, maintaining, and improving the Quality control systems and processes for a variety of critical laser systems as well as leading by influence to drive quality within the culture of the organization.

A successful candidate will have a strong work ethic to meet the occasional high intensity workload for customer commitments. A persuasive personality with strong communications skills is needed to influence key cross-functional stakeholders.

Key responsibilities:

• Quality engineering support for manufacturing and project management
• Develop inspection requirements; facilitate PFMEAs; resolve discrepant material issues and create and maintain quality documents such as control plans and inspection plans
• Act as the quality interface for the laser production team in responding to customer complaints using failure analysis, development of corrective and preventative actions and trend analysis
• Conduct audits, including closing out audit findings, create audit finding reports and determine proper corrective and preventative actions
• Coach and mentor Quality Engineers.
• Support validation activity of processes, equipment, and metrology
• Support and comply with the company Quality System, ISO, and requirements
• Establish and maintain quality control processes and procedures for optomechanical components and systems.
• Develop and maintain quality documentation including inspection plan, test protocols, quality control procedures and reports.
• Collaborate with suppliers to ensure their compliance with quality requirements and drive continuous improvements.
• Actively participate in Continuous Improvement Initiatives such as Lean Manufacturing or Six Sigma projects to enhance Quality, efficiency and cost-effectiveness.

Requirements:

• Bachelor’s/Master's Degree in Mechanical, Optical, Optomechanical Engineering or related Engineering Science
• 6 years of experience in engineering in a machining or manufacturing setting
• Experience in Optomechanical design including knowledge of optical principles, components and optical system integration.
• Solid understanding of Mechanical Engineering Principles including Structural analysis, Material selection, Tolerance analysis and Manufacturing Process.
• Knowledge in integrating optical components including alignment, fixture design and calibration procedures.
• Knowledge of quality systems, regulatory requirements, and industry standards
• Advanced knowledge of blueprint reading and GD&T
• Ability to operate a variety of inspection equipments
• Statistical expertise with DOE and Capability Studies
• Design software- CAD (e.g., SolidWorks, AutoCAD), Minitab, Python, Jump etc.
• Strong and thorough knowledge of quality engineering discipline, including:
• Quality data collection and data analysis
• Understanding of statistical methods, including population sampling, hypothesis testing
• Problem Solving techniques such as 8-D, 5-why, Fishbone / Fault tree, PFMEA, K-T

Preferred Qualifications / Competencies:

• Previous Laser or Optics industry experience is highly desired.
• Familiarity with statistical analysis techniques, such as Weibull Analysis and Gage R&R, as well as appropriate software tools, such as Minitab or JMP
• Familiarity with the following areas: Process Validations (IQ, OQ, PQ), Failure Mode and Effect Analysis (FMEA), Structured Problem Solving (8D) and/or Root Cause Analysis - Corrective and Preventive Actions (RCA-CAPA)
• Previous experience with Risk Management, Engineering Change Control, Handling of Deviations and Non-conformances & Lean Six Sigma
• Experience working with cross functional teams (Engineering, Operations, Sales)
• Ability to complete tasks in a timely manner, with excellent attention to detail and accuracy.
• Project Management Experience
• Self-motivated, ability to identify potential problems or improvements and possess the initiative to take appropriate actions as necessary.

Job Description:

We are seeking a highly skilled Senior Hardware Design and Embedded Systems Engineer with over 10+ years of experience in hardware electronics and embedded systems. The ideal candidate will possess expertise in designing, prototyping, and delivering high-quality hardware solutions for automotive and mobility electronics. This role requires a strong focus on innovation, quality assurance, and project management.

Responsibilities:

Lead hardware design projects from concept to production, ensuring adherence to ISO26262, IEC61508, and SIL standards.

Oversee product estimation, planning, and change management to meet delivery timelines and maintain quality benchmarks.

Collaborate with customers, suppliers, and stakeholders to gather requirements and provide technical solutions.

Manage cross-functional teams, assign tasks, and monitor progress to ensure timely product delivery.

Perform risk assessments, troubleshoot issues, and implement solutions to address challenges.

Execute hardware testing, including unit and integration tests, and validate software-hardware integration.

Prepare technical documentation such as schematics, BOMs, and engineering specifications.

Conduct field failure analysis and provide exceptional customer service.

Key Projects:

Design and validation of automotive electronic systems like electric steering control units and instrument clusters.

Development of mobility solutions such as platform screen doors with advanced safety features.

Embedded product design for two-wheelers, four-wheelers, and industrial automation systems.

Qualifications:

Bachelor's degree in Electronics & Communication Engineering or equivalent.

Extensive experience with embedded systems, microcontrollers, and protocols such as CAN, UART, RS232, SPI, and I2C.

Proficiency in hardware design tools like Altium Designer and OrCAD, along with testing tools such as oscilloscopes and logic analyzers.

Strong understanding of DFMEA, IATF16949, EMI/EMC testing, and reliability assurance.

Skills:

Leadership and team management capabilities.

Exceptional problem-solving and decision-making skills.

Adaptable, self-organized, and passionate about hardware and automotive domains.

Preferred Qualifications:

Knowledge of PMDC and BLDC motor driver design.

Experience with automotive safety standards and compliance testing.

Mechanical Engineer

Role Overview:
We are seeking a skilled and motivated Mechanical Engineer to join our R&D team. In this role, you will design, develop, and test mechanical components for a variety of products. You will collaborate with cross-

Key Responsibilities:

• Design and develop mechanical systems, components, and assemblies for various products
• Create detailed 3D models, technical drawings, and prototypes using CAD software.
• Conduct material selection, stress analysis, and thermal analysis to ensure design integrity and performance.
• Work closely with cross-functional teams to integrate mechanical designs with electrical, software, and user-interface systems.
• Perform testing and validation of mechanical prototypes to ensure they meet performance, safety, and regulatory standards.
• Troubleshoot and resolve design, performance, or manufacturing issues.
• Conduct design reviews, ensuring compliance with product specifications, quality standards, and cost objectives.
• Develop and maintain product documentation, including technical reports, assembly instructions, and testing protocols.
• Stay current with industry trends and technological advancements to continuously improve design processes and product quality.

Qualifications & Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field.
• Proven experience (2+ years) in mechanical design
• Proficiency in CAD software (SolidWorks, AutoCAD, CATIA, etc.) and other design tools.
• Solid understanding of material properties, manufacturing processes, and mechanical testing methods.
• Strong problem-solving skills and the ability to apply engineering principles to complex challenges.
• Well versed at TCP/IP, USB, BLE, Modem, Wi-Fi and Serial communications
• Collaborate with Hardware team in the product development process for cameras and Networking, Wireless and IOT products.
• Excellent communication skills, both written and verbal, to interact with cross-functional teams and stakeholders.
• Ability to work independently and in a team environment, managing multiple projects and deadlines.

Preferred Qualifications:

• Bachelor’s degree in Mechanical Engineering or a related field.
• Experience in product development and life cycle management.
• Collaborate with Hardware team in the product development process for cameras and Networking, Wireless and IOT products.