• Degree in electrical or mechanical engineering recognised by Singapor PE Board or its equivalent.
• Minimum 5 years of experience in TBM operation, repaire and maintenance.
• Ensure smooth operation of TBM.
• Coordinate with TBM manufacturer for technical issues and spare part requirements.
• Familiar with LTA MRT projects specifications and requirements.
• Applicants are required to submit their detailed CV ans state the current and expected salary.

Main Responsibilities:

* To perform all roles and responsibilities required of site supervisors under the Building Control Act.

* Ensure that the M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations.

* Monitor and report on the progress of works.

* Carry out inspection of M&E engineering works prior to concreting, subsequent construction work and defects rectification works.

* To carry out supervision and inspection of the works as directed by the Supervision QP, CRE, SRE, consultants or Superintending Officer.

* To manage and supervise the Resident Technical Officer under his charge.

* Ensure records of all mechanical and engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety are timely updated and properly kept.

* Attending site, progress, variation, and coordination meetings.

* Verifying all reports and claims relating to M&E works submitted by the contractors.

* Liaise with all relevant authorities and stakeholders to maintain proper and updated daily records of all works done including records of tests, inspections, status of work, safety, site diary, material on site and equipment on site, labour force, day works, provisional items or provisional quantities etc.

* Keeping accurate record of variations as instructed or approved by the Superintending Officer and to maintain a set of updated drawings on site.

* Check all drawings including shop drawings, construction drawings and specifications for discrepancies and to report to the Supervision QP, consultants or Superintending Officer.

Qualifications:

* Degree/ Diploma in mechanical or electrical engineering degree recognised by the Professional Engineers Board of Singapore.

* Minimum five (5) years of relevant experience as a mechanical and electrical engineer, of which at least three (3) years shall be in supervision of works similar in nature to major construction works in buildings, services laying and &ol systems.

* Preferably with experience in the supervision of infra services laying, lighting &control systems.

At CAPE, we put talent, hard work, teamwork, and a fun workplace together to learn and grow, approach problems, and solve them creatively and collaboratively.

Join us to be part of the team!

Responsibilities

• Perform structural analysis and design works for building works and civil works.
• Supervise the drafting works related to design and coordinate for deliverables.
• Ensure all engineering works comply with relevant statutory standards, regulations, and Codes of Practice.
• Assist QP/Project Lead in managing projects, liaise with stakeholders, clients, design team, site team and other relevant parties.
• Liaise and coordinate with contractors, project team and design consultants and submission to authorities.
• Working independently in analyses, design, submissions, construction support and coordination works will be advantageous.

Requirements

• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore/Malaysia.
• Minimum 2 years of C&S design experience.
• With working experiences in Singapore/ Malaysia on structural engineering projects.
• Well verse with structural engineering design to local Codes, Regulations and requirements, and Eurocode.
• Well verse in structural design software, e.g. Tekla, STAAD Pro, SAFE, Prokon, Etabs, SAP 2000 etc.
• Familiar with authority submission requirements for civil-structural works.
• Experience in design/project management works in BIM.
• Conversant with statutory code and requirements for site supervision, quality control procedure and construction administration.

This position is a 3-year contract with the possibility of renewal.

We regret that only shortlisted candidates will be notified. By applying or sending your resume to us, you are consenting to the collection, use and disclosure of the submitted personally identifiable data. We collect and use personal data (including name, address, telephone number and email address) submitted by you for a variety of reasons, including for evaluating job applications, processing information requests, and internal record-keeping of our communications with you. Further information on our Personal Data Protection Policy can be found at www.cai.sg.

Work Location: Singapore Changi Airport & Air Freight Centre

Shift work required

1. Must qualify for an Airport Pass (regulated by Airport Police)

2. Must be able to complete (and pass) all relevant certifications/ requirement set by Civil Aviation Authority of Singapore (CAAS) & Changi Airport Group (CAG)

3. Must possess Singapore Class 4 driving license

Jobscope:

4. To tow cargo pallets/ trolleys from tarmac area to respective Air Freight Centres

5. May need to assist in loading/ unloading of baggage & cargo from arriving/ departing flights out of the airport

6. To assist for cargo build-up during lull periods

7. Reports to the Operations Manager for any other duties

Job Description

• Mechanical Design of Jigs & Fixtures and machine parts;
• Perform reverse engineering drawing'
• Involved all activities include designing, sourcing, installation, assembly and troubleshooting;
• Communicate with customers for design input;
• Coordinate with production floor for design related issues;
• Coordinate with sales, production and suppliers;
• Technical support on-site;
• Supporting QC inspection and assembly.

Requirement

• Degree / Diploma in Mechanical Engineering / Automation / Mechatronics or equivalent;
• Proficient in CAD software, preferably in AutoCad & SolidWorks, able to generate parts in 3D models/assemblies;
• Innovative, pro-active, energetic, can work under minimum supervision.
• Hands on experiences

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Update the Maintenance Organization Exposition manuals, and associate documents.
• Actively drive the Safety Management System and manage the Hazard Identification & Risk Assessment system
• Conduct internal and vendor audits (SMS, SABRe, Part 145 regulations, ISO, Nadcap) to improve compliance
• Actively support external audits (SMS, SABRe, Regulatory Authorities, Customers, ISO, Nadcap)
• Monitor and analyze audit/investigation/voluntary reporting data and identify issues/opportunities for improvement
• Review / support vendor & customer quality questionnaire
• Develop and conduct regulation trainings
• Manage staff authorisation system by reviewing the qualifications and conduct competency interviews for certifying staff & internal stamp holders
• Actively drive initiatives like Narrate & Demonstrate (N&D), Behavior Based Safety (BBS), Foreign Object Damage (FOD),
• Drive the SAESL Operating System and SAESL Enhanced Work Streams (SEWS) to inculcate strong safety culture
• Take on ad-hoc projects / assignments to promote safety culture

Requirements

• Diploma / Degree in Mechanical / Aerospace Engineering
• Good knowledge on regulatory Part 145 requirements, ISO9000 and Nadcap
• Knowledge on data analysis and its tools (Minitab, Power BI etc) will be added advantage
• Qualified Lead Auditor and have experience in conducting aviation safety and regulation audits
• Min 3 years of experience in managing the Quality Management System and Safety Management System

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize additive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for laser-related processes.
• Lead and own laser blown powder deposition activities
• Any other duties as assigned by supervisor

Requirements

• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on laser cladding (solid state lasers and blown powder laser) and metallurgical characterization
• Understanding of common component repair processes (welding, heat treatment, machining, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Experience in beam characterization using commerically available equipment
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

• Perform qualification validation of medical device sterilization related equipment and processes
• Perform the release of sterilization batches in accordance to relevant ISO standards
• Ensure the compliance of equipment in accordance to Calibration and Preventive Maintenance requirements.
• Perform complaint handling, investigate root cause of complaint, and perform Corrective Action and Preventive Action as necessary.
• Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.
• Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures
• Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing
• Participate in external and internal audit to ensure company quality system is effective
• Participate in continuous improvement programs such as 6S program, yield improvement projects etc.
• Support new production introduction as a team member representing quality
• Perform other tasks as assigned by the supervisor

Education

• Bachelors Degree in Engineering, Science (e.g. Microbiology) or equivalent

Experience

• Work experience as a sterilization engineer in a medical device manufacturing environment
• Experience with qualification validation of equipment and processes for sterilization of medical device
• Working knowledge of ISO11135 EtO Sterilization for Medical Devices and/or any other relevant standards such as ISO11137 Gamma Sterilization
• ISO13485 Internal auditor

Skills

• Statistical Analysis (Hypothesis Testing, ANOVA, Gage R&R, DOE etc)
• Root cause analysis (Kepner-Tregoe, 5-Why, 6M etc)
• Problem solving techniques (e.g. DMAIC/8D/PDCA/A3 application in continuous improvement)
• Competent with general PC and Office software application

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize adaptive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for CAM and non-contact measurement related repair processes.
• Lead and own CAM and non-contact measurement activities
• Any other duties as assigned by supervisor

Requirements

• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on digital manufacturing and conventional machining
• Experience in operating non-contact measurement equipment and Siemens NX multi-axis manufacturing module
• Understanding of common component repair processes (welding, heat treatment, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

* Oversee efficiency of operational processes

* Participate in strategic planning and goal-setting for various business functions

* Analyze business requirements and customer needs

* Monitor and report on department performance

* Supervise and train employees

* Provide administrative support (e.g. updating inventory)

* Ensure compliance with company policies and regulation

Jetstar thrives on innovation. We are always looking to employ ambitious, proactive team-orientated professionals to help our business work smarter and more efficiently. You will be encouraged to think innovatively whilst developing and maintaining best practice.

As part of the Jetstar Asia’s Network Operations team, you are responsible for flight watch duties; ensuring relevant information is transmitted to crew via suitable means and follow up in absence of acknowledgement from crew; coordinate with dispatch service provider and act as medium between flight dispatch and the pilot for operational support.

Key responsibilities of this role are:

• Ensure flights are crewed as efficiently as possible on any given day given the changing situation.
• Ensure crew rosters are efficiently repaired following any disruptions to the daily operations
• Liaise and negotiate crewing for crew disruption management and reduced delays.
• Implement disruption management actions as required to maintain schedule and recover from disruption
• Report and update actions taken during day of operations shift in the Operations Centre Electronic Log Book
• Promptly answer all phone queries addressed to the Operations Centre.
• Liaise and negotiate with the engineering service provider during disruptions to ensure the appropriate aircraft is available for recovery and that maintenance requirements are met and retained.
• Coordinate with various GHA and track all departures, arrivals. In event of delay, disruption, technical or diversion scenario take corrective action and/or escalate to next level as appropriate
• Upkeep and provision of necessary documentation required for flights
• Archive post flight documents and provide support during inspections and audits as prescribed by the state regulator
• Collate and distribute Daily Operations Report.
• Filing APP, CTA for crew at the required ports.
• Continuously review and suggest improvements to Operations Control procedures and processes.

To be successful in this role, you will need to demonstrate the following skills & experiences:

• Diploma in any discipline
• At least 2 years of relevant experience
• Accredited Flight Dispatch Training qualification.
• Flight dispatch / flight planning experience preferred
• Excellent written and verbal communication skills
• Excellent interpersonal skills and the ability to establish sound working relationships with all levels of organisation.
• Strong team player with a commitment to safety

Authorities and Responsibilities

1. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives.
2. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
3. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with customers, production and suppliers to meet the quality requirements.
7. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
8. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
9. Manage the implementation / schedule of calibration control.
10. Participate in the implementation of risk assessment and risk control of medical devices

Competence Requirement

• Preferred to have NTC / Diploma / Degree in Precision / Mechanical Engineering or related discipline.
• Fresh degree may be considered while other educational qualification is required with preferred 3 - 8 years of relevant working experience in related Engineering industry.
• Possess good analytical, verbal, written and interpersonal skills.

RESPONSIBILITIES

Manufacturing/ Production Line setup, pre-qualification and maintenance.
Provide technical support to customer related to assembly/ manufacturing.
Develop process and generate work instruction.
Review drawing, customer specifications and Bill of Materials cleanup.
Assembly, test, and commissioning of highly automated industrial equipments.
Train, certify and monitor assembly technicians.
Develop necessary technical competencies and equipment capabilities to meet operational performance targets
Work and collaborate with Production to achieve the desired quality and output
Conduct MRB to review non-conformance parts disposition.
Design/Fabricate tools, jigs and fixtures.
In-process yield/reject/scrap rate monitoring.
Lead and drive the team to participate in all continuous improvement projects related to cost, quality, utilisation & productivity using Six-sigma or similar applicable technology such as Cpk, FMEA, Lean etc
Any other duties assigned by his/her superior / Manager.

REQUIREMENTS

Minimum three years of relevant experience in Equipment Manufacturing Industry preferably wire bonding Equipment (Ball Bonding/Wedge Bonding/Die Bonding)
Diploma in Mechanical/Mechatronics/Electrical Engineering or equivalent
Proficiency in equipment troubleshooting techniques
Strong problem solving and analytical skills with good knowledge of SPC
Good leadership / presentation / communication / team building skills
Ability to work proactively and to identify issues and propose solutions
Able to design and implement effective systems, processes and informatio/ reporting mechanisms
Experience in Lean Manufacturing and ISO system

Please indicate your current and expected remuneration.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Key Responsibilities

1. Develop new procedures and Best Known Methods (BKMs) to service new products. Contribute to the FMECA process.
2. Participate in or own first chamber Build & Test in Apps lab. Solve issues, or work with Engineering to address issues identified. Work with Manufacturing to develop procedures and participate (if required) on New Product final test
3. Partner with Quality & Reliability (Q&R) group to review and address Top Field Issues. Participate in or own CAPA process. Conduct or facilitate Failure Analysis (FA) if needed
4. Develop and document procedures to install (start-up), retrofit and maintain the product (Technical Product Manuals)
5. Develop new procedures, Customer Engineering Notices (CENs), Internal Service Bulletins (ISBs) and troubleshooting guides as required
6. Collect process and qualification data to create product Best Known Methods (BKMs)
7. Develop initial training package for new products and work with Global Technical Training (GTT) to develop training class. Train Customer Engineers (CEs), Process Engineers (PSEs) and Technical Product Support (TPS) assigned to customers who will receive ELS Shipments, prior to shipping
8. Identify new parts that require to be stocked by AGS and work with them to ensure parts are stocked in correct locations

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job responsibilities:

• Overall project planning, schedule and executing the delivery of projects within time, budget and Client’s expectations.

• Monitoring progress and identifying critical activities to expedite smooth progress of works on site to meet targets.

• Coordinate internal resources and third parties/vendors e.g. Consultants and Sub- Contractors/Suppliers for the flawless execution of all projects.

• Ensure that all projects are delivered on-time, within scope and within budget.

• Ensure that work are executed in accordance with approved plans/drawings, contract specifications and regulatory requirements.

• Ensure resource availability and allocation.

• Develop detailed project plan to monitor and track progress.

• Manage changes to projects’ scope, schedule and costs using appropriate verification techniques.

• Perform risk management to minimize project risks.

• Measure project performance using appropriate tools and techniques.

• Create and maintain comprehensive project documentation.

• Responsible for the overall project management, planning & control, and execution, including project budget evaluation and profitability.

entify and comply with all applicable statutory/regulatory requirements related to the project.

Lead a team of professional and technical staff in planning and execution of day-to-day operations to achieve all key project target.

Respond swiftly to work delays, emergencies, and other problems.

• Report and escalate to Management as needed.

• Any other duties that may be assigned.

Requirements:

• Proven at least 3 years of working experience in project management in the public and private residential, government and commercial building projects.

• Solid technical knowledge related to structural, architectural (finishing) or M&E works.

• Solid organizational skills including attention to detail and multi-tasking skills.

• Excellent written and verbal communication skills.

• Excellent team player with ability to meet tight deadlines.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I with assistance. Able to perform routine preventative maintenance within established timeframes.
• Responds to fab issues by communicating with other engineers. Verifies operational quality of system equipment with assistance.
• Demonstrates the ability to follow all checklists and procedures. Ensures correct Revs of procedures and schematics are available prior to performing work with supervision.
• Strives to perform BKM’s assisted. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve basic technical problems. Understands and supports escalation plan. Supports seniors for Day-Day CM resolution. Seeks to learn and understand fundamental theories. Learns to read and understand circuit diagrams. To train / OJT in primary product and platform.
• Learns and applies diagnostic techniques and the use of documentation and test equipment with assistance from senior engineers.
• Develops the ability to represent Applied Materials to the customer. Uses good customer service skills at all times while maintaining a professional demeanor. Displays respect for the customer by maintaining an orderly work area.
• Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge:

• Develops skills to perform basic activities in own job.

Business Expertise:

• Understands how the assigned duties integrate with others in the team.
• Develops responsibility for customer satisfaction within work area.

Leadership:

• Has no supervisory responsibilities.

Problem Solving:

• Uses existing procedures to solve straightforward problems; has limited opportunity to exercise discretion.

Impact:

• Impacts the accuracy of own work; receives close supervision; duties are clearly defined, and methods and tasks are described in detail.

Interpersonal Skills:

• Uses communication skills and common courtesy.

Job responsibilities:

• Overall project planning, schedule and executing the delivery of projects within time, budget and Client’s expectations.

• Monitoring progress and identifying critical activities to expedite smooth progress of works on site to meet targets.

• Coordinate internal resources and third parties/vendors e.g. Consultants and Sub- Contractors/Suppliers for the flawless execution of all projects.

• Ensure that all projects are delivered on-time, within scope and within budget.

• Ensure that work are executed in accordance with approved plans/drawings, contract specifications and regulatory requirements.

• Ensure resource availability and allocation.

• Develop detailed project plan to monitor and track progress.

• Manage changes to projects’ scope, schedule and costs using appropriate verification techniques.

• Perform risk management to minimize project risks.

• Measure project performance using appropriate tools and techniques.

• Create and maintain comprehensive project documentation.

• Responsible for the overall project management, planning & control, and execution, including project budget evaluation and profitability.

entify and comply with all applicable statutory/regulatory requirements related to the project.

Lead a team of professional and technical staff in planning and execution of day-to-day operations to achieve all key project target.

Respond swiftly to work delays, emergencies, and other problems.

• Report and escalate to Management as needed.

• Any other duties that may be assigned.

Requirements:

• Proven at least 3 years of working experience in project management in the public and private residential, government and commercial building projects.

• Solid technical knowledge related to structural, architectural (finishing) or M&E works.

• Solid organizational skills including attention to detail and multi-tasking skills.

• Excellent written and verbal communication skills.

• Excellent team player with ability to meet tight deadlines.

Job Description

Key Responsibilities

1. Manage customer expectation and issues with software releases providing a prioritized list of requests to business unit per platform. Independently learn and investigate customer's high value problem (HVP), systematic bug or systematic software failures.
2. Troubleshoots a variety of difficult software problems and interface with engineering teams to improve product quality.
3. Interfaces with external customers for requirements analysis and schedule.
4. Manage software proliferation at customer sites. Deliver software implementations and manage customer to achieve project objectives.
5. Performs customer specific software testing and analysis on bugs and enhancements.
6. Track software performance and quality at external customer sites.
7. Provide on-going training to customers and customer engineers (CE) for technical products and systems issues. Deliver updates and reports to managers, partners and peers.
8. Assist in training junior level engineers in departmental procedures, corporate procedures, and detailed product operation. Lead work groups and troubleshooting forums.

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus