Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical/Metallurgical engineering or equivalent.
3. Must have valid API 510, API 570, API 571 and API 653 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in Shell Bukom Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping, tanks and columns.

Responsibilities:

• Preparation of process scheme/process flow diagram/FEED and process description
• Familiar with material and heat balance calculations and thermal rating of heat exchangers
• Development of process data sheets and able to perform NPSH/hydraulic calculation and equipment and line sizing
• Participate in Hazop Study and develop the P&ID
• Prepare material selection diagram and establish requirements for any chemicals, solvents and catalyst
• Perform relief valve sizing, control valve sizing and popping philosophy
• Prepare the equipment and line list and review the various equipment and instrument data sheets
• Interface/coordinate with other discipline for design development

Requirements:

• Degree in Chemical Engineering
• Minimum 8 years of design experience for process system in the oil and gas, chemicals storage and process environment. Candidate with more years of relevant experiences may be consider for a lead position.
• Familiar with respective code of practices for process design and fire protection such as API, NFPA, SS532, SS634 etc.
• Able to lead the process team

A Lead Automation/Systems Engineer at RoviSys will serve as a software or hardware lead on projects, as well as possess the ability to understand functional specifications and/or design specifications and translate that knowledge in the implementation of control systems. A lead engineer will be expected to develop skills required to successfully implement an entire project from both a control system software and hardware standpoint. A Lead Engineer will act as a mentor to Engineers and support training plans for Engineers.

Description of work:

• Consult with clients on digital transformation strategies within their facilities.
• Work in a team environment with engineers and designers from RoviSys, partners and clients to provide state of the art Control system to improve efficiency, product quality and profitability of process manufacturing.
• Design Electrical panels, Control Architecture and wiring drawings.
• Development of P&ID documentation for process clients.
• Define and implement programmable logic controller (PLC)/ladder design, distributed control system (DCS) configuration to meet client needs.
• Testing and on-site commissioning of control systems.
• Support of process control clients at sites in Singapore and aboard.
• Will lead team of engineers and technicians to provide control system solutions for clients.
• Will have opportunities to manage small-scale project of 1-3 people.

Control Systems Knowledge:

• Industry 4.0 applications.
• Electrical design and Process Control fundamentals.
• Familiarity with Controllers, such as single loop control, PLC, DCS or PC based control.
• IOT devices, communications protocols and connectivity.
• Exposure to Control Theory and some process understanding is helpful but not required.
• Platforms: Microsoft Windows XP/Vista/7, Rockwell Automation, Siemens, Emerson DeltaV, etc.
• Process understanding of batch or continuous process control, combustion control, etc.
• Awareness of process safety, validation and good documentation practices.
• Programming languages: PLC ladder Logic, Function Block, SFC VB, etc.
• Third-party HMI/SCADA Software, i.e. Intellution, WonderWare, OSIsoft, etc.
• Others: Network design/administration.

Qualifications:

• Self-motivated, excellent communication skills and enjoy working with people.
• B.S in Engineering, Physics and related fields.
• Min. 2 years as an Engineer with exposure to automation.

Purpose: Strategic planning and develop cost effective & low risk manufacturing/assembly process steps/planning from raw material to completion including special processes through Product Quality Plan(PQP).

Key Area of Responsibilities:

• Transfer of Project, Technology, System from customer to VDL for New product development.
• Feasibility study for New Assembly.
• Identify the facilities/supplies required for the assembly.
• Define and establish Project Plan for Assembly to meet on time delivery.
• Resolve technical issues in assembly to ensure smooth production.
• Manage technical changes to fulfill customer requirement.
• Implement improvements to processes for cost effectiveness.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical or Precision Engineering or other relevant discipline.
• Minimum 3 years of experience as a process engineer in the Contract Manufacturing industry or equivalent.
• Mechanical and electrical workmanship
• Experience in working in cleanroom will be an advantage
• Good problem-solving skills
• Proficient in Microsoft Excel functions
• Good communication skills

Purpose: The role is responsible for handling customer quality issues and continuous improvement activities of the Company products and processes. You are required to drive internal departments on quality-related issues to follow up on effective corrective/preventive actions. You will be liaising with the internal team to support QBR, RMA, IFR, MRB, FAI Review and approval with Supplier and customer, In-Process Audit, FA Launch, 8D, SDR, FPY, tracker processes, and communicate between customer and internal team on Quality related matters.

Key areas of responsibilities:

• Lead and drive customer quality CAB meetings to derive root causes and corrective and preventive actions based on 8D methodology
• Perform ad-hoc visits to customer sites to facilitate investigation and improvement proposal
• Develop, drive, and lead the improvement of manufacturing systems and processes to meet and exceed customer expectations
• Lead and drive company-wide continuous improvement projects with relevant Organizations
• Build and drive customer relationships to improve customer satisfaction
• Perform customer quality performance monitoring and reporting to internal management and customer
• Manage the first article process and submit the report to the customer for approval
• Lead cross-functional team to establish the outgoing inspection checklist for NPI to ensure that the product meets customer requirement
• Analyze customer quality performance to identify trends and improvement opportunities
• Perform manufacturing audit

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical/Manufacturing Engineering discipline
• At least 5 years of working experience, 3 years in dealing with customer quality managers or direct customer facing, related to the manufacturing environment, preferably from the semiconductor, semiconductor equipment industry, electronics, or high-tech instrument industry
• Strong knowledge and practices in 8D, SPC, FMEA, 6-sigma methodology (Certified Black/Green Belt), and change management
• Good understanding of first-article inspection requirements and expectations
• Excellent leadership and effective communicator with all levels of associates and management
• Experienced in Minitab is an advantage
• Experienced QMS auditor

What you’ll do:

• Responsible for the project development studies such as feasibility study, site selection, inputs for ESIA, technical due diligence, technology selection etc.
• Responsible for the mechanical design, preparation of specification, technical evaluation, engineering, construction, installation, testing and commissioning of the:
  • • Renewable energy power plant.
    • Combined cycle power plants with gas turbine, heat recovery steam generators and steam turbines.
    • Demineralized water system.
    • Fuel gas system.
    • Fuel oil system.
    • Wastewater treatment system.
    • Compressed air system
    • Circulating water and closed cooling water system.
    • Firefighting system.
    • Mechanical/Electrical Building Services.
    • Other ancillary system pertaining to power plant operation.
• Coordinate engineering review and other issues with other disciplines.
• Develop project/consulting services proposals and supporting business development and marketing (internal & external) efforts.
• Ensure all work is carried out in compliance with regulatory, legal, quality and company requirements.
• Assist Professional Engineer in liaison, preparation and follow up of Authority Submission.
• Work closely with project manager/project engineering manager in project delivery.
• Manage client relationship and expectations during the services delivery.
• Approve calculations, technical notes, requisitions, specifications, drawings and similar deliverables.
• Support all phases of project development from pre-feasibility to handover of plant
• Work closely with junior engineers, provide necessary guidance, training and provide assistance on their technical / professional development at AECOM.

Job Description:

• Preparing contracts for external stakeholders (including maintenance contracts).
• Preparing budget for the medical centre.
• Preparing presentations for internal/external stakeholders.
• Liaising with internal stakeholders e.g. Finance, HR, IT Departments.
• Liaising with external stakeholders e.g. contractors, vendors, hospitals, dormitories, government agencies and landlord.
• Participate in procuring various services for the medical centre.
• Regularly processing and reviewing invoices, outsourced services and centre's licenses.
• Data entry and consolidation.
• Prepare and coordinate licensing and audits (Ministry of Health, National Environment Agency and Ministry of Manpower).
• Reporting officer of admin and operations team, overall in charge of rostering, staff development and appraisals.
• Liaison person for research projects.
• Preparing monthly workload statistics / dental reports.
• Overseeing Primary Care Plan (PCP) onboarding and off-boarding.
• Preparing and coordinating reports to Migrantwell Singapore.

Requirements

• Degree in Business Administration or equivalent.
• Minimum 5 years of relevant experience in managerial level, preferably operations experience in healthcare setting.
• Excellent interpersonal and communication skills to work well with all departments.
• Strong leader with tested ability to manage, motivate and coach teams.
• Enjoys challenges and able to work with tight timelines when needed.
• Well versed in Microsoft Office (Word, PowerPoint and Excel).
• Able to work in collaboration with other professionals in the multi-disciplinary team.

Work Location

St Andrew's Migrant Worker Medical Centre

27 Penjuru Walk, #01-24, Penjuru Recreation Centre, Singapore 608538

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications.
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Electrical or Electro-mechanical engineering, preferably with a focus on motion systems
• At least 7 years of relevant working experience (semicon or similar)
• Knowledge of electric design principles of cabling, connectors, safety systems, electronic racks, PCB design
• User of 3D design tools and schematic drawing tools (e.g. NX, SolidWorks, E-Plan)
• Basic programming skills and ability to debug electrical systems
• Understanding of motion control systems
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing interdependency between electrical, electromechanical and mechanical (sub)systems
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Job Description & Requirements

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Precision Engineering or equivalent
• Good communication skill
• Has a passion for Engineering
• Occasional overseas travelling is required
• Fresh graduates are welcome to apply

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Purpose: To retrieve and analyse data to determine the company's needs and provide support in decision-making.

Key Area of Responsibilities:

• Understand the stakeholders' requirements and assess the technical feasibility of implementing the best solution to achieve the highest added value.
• Develop BI tools such as reports and dashboards for the various process owners and management to meet business needs.
• Develop automation tools/applications or IT-related solutions to improve the efficiency of the various processes in the organization.
• Develop/source and implement new technologies/capabilities to develop more efficient and secured business processes.
• Identify areas where there is an opportunity to significantly improve the efficiency and security of the business processes, and where there is currently no capability or tool available in-house.
• Create user guides and documentation for the various BI and process automation tools, to ensure usability and maintainability.
• Share the solution, including the user guides and documentation, with the Digital Factory Team so that all BI Engineers can use the knowledge for future projects and back up each other.
• Support and participate in company's continuous improvement program.

Qualification & Experiences:

• Degree in Engineering, Science, Business and Finance or other relevant field.
• Minimum 2 years of experience as a business intelligence engineer in the semiconductor industry.
• Certified Business Intelligence Professional (CBIP) will be an advantage
• Knowledge of Lean Six Stigma
• Proficient in advanced Excel functions
• Knowledge of different programming language (Javascript, Python & C#)

Job Responsibilities:

• Establishes networking environment by designing system configuration, directing system installation, defining, documenting, and enforcing system standards
• Maximizes network performance and optimization by monitoring performance, troubleshooting network problems and scheduling upgrades when necessary
• Oversee maintenance of all IT system in line with IT security policy
• Secures network system by establishing and enforcing policies, defining and monitoring access
• Ensure project tasks are completed on time and project goals are achieved

Relevant experience:

• 1-2 years of experience in network engineering, administration, or related roles

Basic skills required:

• Diploma / Bachelor degree in IT related field
• Strong understanding of network protocols (Eg: TCP/IP, DNS, DHCP, BGP, OSPF)
• Knowledge on LAN/WAN networking, network design, problem solving, network hardware configuration and project management
• Familiarity with cloud networking (AWS, Azure, Google Cloud) is a plus
• Knowledge of network security best practices and tools
• Excellent problem-solving and analytical skills
• Responsible, resourceful, customer oriented and an independent player

Job Description & Requirements

• Perform general electrical maintenance including troubleshooting and repairing malfunctioning equipment.
• Identify the root cause and conduct analysis to generate solutions.
• Ensure completion of all protective maintenance duties are following the safety standards that complying with company policy.
• Install improvements and major upgrades to process system.
• Provide engineering support in project or plant maintenance
• Alert the Engineer Managers of any unusual incident that have taken place.
• Monitor the equipment process and prevent the equipment breakdown.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Requirements:

• Good interpersonal and communication skill
• Work independently
• Attention to details
• Good problem solving and observing skills

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical engineering or equivalent.
3. Must have valid API 510 and API 570 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Oversee the installation, calibration, and testing of instrumentation and control systems
• Conduct functional and performance tests for instrumentation and control systems
• Identify and troubleshoot issues during commissioning and ensure timely resolution
• Collaborate with engineering and construction teams to ensure seamless integration of systems
• Prepare and maintain accurate documentation and reports related to commissioning activities
• Ensure compliance with safety standards and protocols
• Any other duties to be assigned from time to time

Pre-requsites:

• Bachelor's degree in Electrical, Instrumentation, or a related engineering field.
• Minimum 5 years of experience in commissioning instrumentation and control systems in power plant or industrial projects
• Strong knowledge of control systems, instrumentation and DCS
• Excellent troubleshooting and problem-solving skills
• Ability to work in a team environment and communicate effectively
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

Purpose: To manage and provide technical support of IT systems and networks, to ensure uninterrupted and secured business operation, and compliance with VDL/ETG standards and roadmap.

Key Area of Responsibilities:

• Maintain and update all information technology (IT) systems, devices and peripherals, within the company to ensure stable and reliable performance.
• Maintain and update the company’s network infrastructure and adhere to the parameters & static address tables according to the One-ETG standard.
• Trouble-shoot and resolve all IT-related technical issues and prevent re-occurrences.
• Ensure security and proper access control of all IT systems, networks and data, so that they are free from malware, spyware, hacking, illegal software and unauthorized access.
• Create regular backups of all relevant company data and store it safely, to ensure Business Continuity, in case of systems and/or network outage.
• Research and benchmark new developments in the IT industry, and propose improvements to business processes to save costs and drive for better efficiency and productivity.
• Source, communicate and manage external parties or service providers that provide service support and maintenance to operational IT matters.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Computer Science/Electrical and Electronic Engineering or other relevant field.
• Minimum 3 years of working as a system support engineer in the semiconductor industry or other similar roles.
• Proficient in Microsoft Excel functions
• Good communication skills

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Tasks and Responsibilities

• To assist Fire Safety Manager in the implementation of protocols as per Emergency Response Procedure (ERP) to be in line and compliance with Singapore Fire Code requirements.
• To assist Fire Safety Manager in conducting relevant drills as per frequency stipulated by SCDF.
• To enforce on compliance of all Fire safety related legislations and Pollution control matters.
• To develop, plan and conduct training relevant to emergency response scenarios to all relevant staff and contractors within PaxOcean.
• To organise and conduct first aid & rescue related training to all HSE and yard staff.
• To lead appointed CERT members in firefighting, rescue and oil pollution control operations.
• To support in the administration and conduct of all other HSE related training i.e., Safety Induction Program for all staff & subcontractors.
• To be in charge of planning, inspecting, replenishing and maintenance of all emergency response equipment within HSE department Store in accordance manufacturers recommendation and/or industry best practices.
• To support and provide first aid treatment to casualties in times of emergency.
• To ensure that all fire fighting, fire suppression and rescue/ first aid equipment are maintained periodically as per manufacturer’s or Industry best practices.

Job Requirements

• At least 3-5 years of SCDF Experience on Emergency.
• NITEC or higher NITEC or equivalent and above.
• At least 3-5 years of actual front-line emergency response experience including (but not limited to) Firefighting and casualties Rescue, Confined Space Rescue, Work at Height Rescue
• Experience in leading and managing a team of responders for the mentioned emergency scenarios
• Candidates without prior experience are encouraged to apply.

In this role, you will:

• Responsible for machine wiring, troubleshooting, and performing functional checks on electrical systems in prototypes.
• Documenting activities in technical reports and also support for basic mechanical assembly.

Responsibilities:

• Wire prototype machines according to design specifications.
• Identify and troubleshoot electrical issues for prototype machine.
• Perform function check to ensure that the prototype operates as intended.
• Document activities and troubleshooting processes in technical reports.
• Provide supporting basic mechanical assembly

Requirements:

• Diploma in Electrical Engineering or Equivalent
• Able to Interpret electrical schematics, diagrams, and technical documents.
• Independent and ability to diagnose and resolve electrical problems.
• Hands-on experience with machine.
• Good time management, pro-active, self-motivated and high sense of responsibility.

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical engineering or equivalent.
3. Must have valid API 510 and API 570 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience in shell Seraya Singapore.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

The Senior Director, Strategy and Operations for Visa Consulting & Analytics (VCA) Asia Pacific (AP) will be entrusted with a broad portfolio of responsibilities helping Visa to accelerate the growth of VCA and the broader Advisory business. He/she will be a key member of the VCA AP leadership team, working closely with VCA AP Geographical Leads as well as the Head of VCA Consulting, Managed Services and Data Science in AP. Additionally, this role is responsible for driving Value-in-Kind (VIK), which is Visa’s commitment to provide clients with products and services as an incentive, in lieu of cash incentives for Visa.

You will play a meaningful role in growing VCA’s business during a dynamic period in the payments industry, driving the development of strategy, planning and infrastructure for the business to scale. You will collaborate closely with colleagues across Visa including Sales, Product, Value Added Services, Client Services and other functions such as the People Team, Finance and Operations. The position is effectively a Chief of Staff role that reports to the Head of VCA in AP.

Responsibilities

• Support the Head of VCA AP as a Chief of Staff, developing and aligning the strategy and planning in partnership with the leadership team
• Develop the long-term strategy for VCA and Visa, and drive the alignment and execution of strategic initiatives with the rest of the organization
• Drive Value-in-Kind (VIK) for Visa by developing and executing initiatives that accelerate the creation of VIK in Visa’s deals and consumption of VIK towards Visa’s services and solutions, including but not limited to VCA’s services
• Design, develop, and lead initiatives that strengthen core infrastructure needed to scale the VCA business in AP, while driving operational efficiency for the business. This includes, but is not limited to, people / talent / project management, financial performance management, knowledge management, systems and processes
• Lead planning and performance management for VCA which includes Annual Budgeting, Regular Pipeline Reviews, Monthly and Quarterly Business Reviews with the Leadership Team
• Balance facilitation, influence, and leadership to drive alignment across the Visa organization and execute strategic initiatives for VCA
• Manage a team of 5 to drive the end-to-end planning and execution of a broad range of initiatives for VCA

We are seeking an experienced Executive Engineer, Underground Structures to join our team in Singapore, Singapore. In this pivotal role, you will lead the design and execution of complex underground infrastructure projects, ensuring the highest standards of safety, efficiency, and innovation.

• Oversee the planning, design, and construction of underground structures, including tunnels, underground stations, and deep foundations
• Develop and implement engineering solutions for complex geotechnical and structural challenges
• Manage project teams and collaborate with cross-functional departments to ensure timely project delivery
• Conduct detailed structural analysis and design for underground facilities
• Ensure compliance with local and international safety regulations and construction standards
• Evaluate and implement innovative construction methods and technologies to improve project efficiency
• Provide technical leadership and mentorship to junior engineers
• Prepare and review technical reports, design calculations, and construction drawings
• Liaise with clients, contractors, and regulatory authorities to address project-related issues
• Participate in business development activities and contribute to proposal preparation