SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior / Associate Engineer to be part of our Thin Film diverse team of talent. You will support the running of Production and ensure equipment readiness and worthiness for production.

What you will be working on:

• To assist Thin Film equipment engineers to sustain equipment performance and perform schedule & adhoc preventive maintenance related activities to achieve operation goals
• Perform 12-hour shift duties to support the running of Production and ensure equipment readiness and worthiness for production
• Ensure good PM quality and PM success rate for good Uptime
• Planning of Daily PM schedule for negotiations with Manufacturing
• Maintain good 6s in work environment before and after PM
• Parts ownership to ensure sufficient parts for basic Preventive Maintenance Activities
• Troubleshoot and resolve Issues encountered during PM
• Assist Duty Engineers in Sustaining the line and recovery of Tool Alarms and parts change
• Assist new crews on their On-The-Job-Training (OJT) by acting as their buddy
• Provide Hands on Training for New PM Crew
• Lead/Participate in Continuous Improvement projects to meet Company Objectives

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics
• 1-2 years’ experience in frontend semiconductor manufacturing environment.
• Some knowledge in Microsoft Office applications
• Able to perform 12-hour rotating shift
• Good ability and experience working in a multi-cultural environment
• Clear and concise presentation skills
• Team Player
• Strong sense of responsibility and Positive learning attitude

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

• Internal and external excursion management (MRB / Quality Claims)
• Customer data reporting
• Conduct Quality related training
• Support customer survey and audits
• Continuous improvement activities

Requirements

• Bachelor's degree in Engineering or Science.
• Strong systematic and analytical problem-solving abilities.
• Proactive attitude with the ability to handle multiple tasks simultaneously.
• Excellent communication skills and a collaborative team player.
• Understanding of system flow and databases; basic SQL knowledge is advantageous.
  

For Experienced Candidates:

• Proven experience with QA tools such as 8D, FMEA, fishbone diagrams, and AND.
• Solid working knowledge of Statistical Process Control (SPC) and auditing practices.

For Entry-Level Candidates:

• Willingness to learn and adapt to new QA tools and methodologies.
• Basic understanding of quality assurance principles and practices.
• Freshgraduate with part time working experience during Uni time (aside from internship) is a plus.

We are seeking a skilled and motivated Data Engineer with expertise in Hadoop, Spark, OpenShift Container Platform (OCP), and DevOps practices. As a Data Engineer, you will be responsible for designing, developing, and maintaining efficient data pipelines, processing large-scale datasets. Your expertise in Hadoop, Spark, OCP, and DevOps will be crucial in ensuring the availability, scalability, and reliability of our ML Solutions.

Responsibilities:

• Implement data transformation, aggregation, and enrichment processes to support various data analytics and machine learning initiatives
• Collaborate with cross-functional teams to understand data requirements and translate them into effective data engineering solutions
• Ensure data quality and integrity throughout the data processing lifecycle
• Design and deploy data engineering solutions on OpenShift Container Platform (OCP) using containerization and orchestration techniques
• Optimize data engineering workflows for containerized deployment and efficient resource utilization
• Collaborate with DevOps teams to streamline deployment processes, implement CI/CD pipelines, and ensure platform stability
• Implement data governance practices, data lineage, and metadata management to ensure data accuracy, traceability, and compliance
• Monitor and optimize data pipeline performance, troubleshoot issues, and implement necessary enhancements
• Implement monitoring and logging mechanisms to ensure the health, availability, and performance of the data infrastructure
• Document data engineering processes, workflows, and infrastructure configurations for knowledge sharing and reference
• Stay updated with emerging technologies, industry trends, and best practices in data engineering and DevOps
• Provide technical leadership, mentorship, and guidance to junior team members to foster a culture of continuous learning and innovation to the continuous improvement of the analytics capabilities within the bank

• Bachelor's degree in Computer Science, Information Technology, or a related field
• Proven 2-5 Years of experience as a Data Engineer, working with Hadoop, Spark, and data processing technologies in large-scale environments
• trong expertise in designing and developing data infrastructure using Hadoop, Spark, and related tools (HDFS, Hive, Pig, etc)
• Experience with containerization platforms such as OpenShift Container Platform (OCP) and container orchestration using Kubernetes
• Proficiency in programming languages commonly used in data engineering, such as Spark, Python, Scala, or Java
• Knowledge of DevOps practices, CI/CD pipelines, and infrastructure automation tools (e.g., Docker, Jenkins, Ansible, BitBucket)
• Experience with Graphana, Prometheus, Splunk will be an added benefit
• trong problem-solving and troubleshooting skills with a proactive approach to resolving technical challenges
• Excellent collaboration and communication skills to work effectively with cross-functional teams
• Ability to manage multiple priorities, meet deadlines, and deliver high-quality results in a fast-paced environment
• Experience with cloud platforms (e.g., AWS, Azure, GCP) and their data services is a plus

We seek individuals with highly developed conceptual, strategic, and analytical skills, capable of striking a balance between visionary thinking and practical solutions. The ability to comprehend, inspire, and mobilize others is crucial. A business-oriented mindset coupled with effective storytelling will drive your success. We are looking for self-starters ready to take on responsibilities with enthusiasm.

Roles & Responsibilities

• Developing and maintaining the entire DevOps pipelines.
• Coordinate with the stakeholders from requirements gathering until successful implementation DevOps pipeline on boarding.
• Work with the vendors and for internal platforms to setup centralized DevOps solutions considering market best practice, Industry standard and ease of support.
• Work with the vendors and for internal platforms to upgrade the DevOps tools farm and integrating with tools.
• Lead analysis and resolution of root cause for Test Orchestration / Environment related issues
• Ability to multitask and work in a fast-paced, collaborative team environment.
• Excellent written and oral communication skills; writing, publishing and conference-level presentation skills
• Stays current with industry trends and leads development of key DevOps, Runtime, and Operational innovation platforms.

• Deep technical background, with hands-on experience in supporting CI/CD pipelines (Bitbucket, Jenkins, Artifactory, Sonar, Veracode for SAST, JIRA and Confluence).
• Hands on experience building CI/CD pipelines orchestration by Jenkins, GitLab CI, GitHub Actions or similar tools is a must-have.
• Skill to containerize a application and good if Kubernetes
• Good Experience on OpenShift or AWS
• Prior technical background on different build and branching strategies.
• Deep technical background on Kubernetes deployment process.
• Good knowledge on maintaining/deploying secrets in Kubernetes.
• Prior working experience in setting up Jira workflow.
• Strong hands-on experience on Shell or Groovy scripting.
• Prior experience is customizing JIRA and Setting up confluence spaces.
• Prior hand-on experience in setting up CI/CD pipeline as a centralized solution.
• Hand on experience in setting up DevOps governance, Security standards and audit requirements.
• Prior experience in setting up DevOps pipeline in internal and external cloud offerings.
• Experience with continuous testing, techniques and tools (Junit, Sonar Cube, Veracode etc.)
• Technical exposure of automation accomplished with advanced Python, Chef, Ruby and PowerShell
• Working knowledge of Murex, MxTest, Mx pipeline and Machine Learning applications will be an advantage.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible and focus on creating an engineering plan for land development based on their calculations and any research conducted. They should have experience with AutoCAD and be able to utilize strong design skills in order to create visual aids. By utilizing strong organizational and communication skills, this candidate will also have the ability to execute a project based on the criteria outlined.

Key Responsibilities

• Take charge of facility CIVIL&MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management CIVIL&MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Civil Engineering or a related STEM field.
• More than 5 years of construction project management experience, including 300mm semi-conductor Fabrication plant construction experience.
• Good written and verbal communication skills in English
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Key Responsibilities

• Take charge of facility MEP package concept design and RFP Preparation for 300mm semi-conductor Fabrication plant.
• Supervise and monitor EPC contractors or design consultants’ design progress.
• On-site management MEP package construction schedule and commissioning.

Education Qualification & Essential Experiences

• Bachelor's degree in Mechanical Engineering or related field.
• 300mm fab facility mechanical system operating experience, especially Exhaust / Chiller / PCW & Clean Room Systems.
• Good written and verbal communication skills in English.
• Good skills of computer software e.x. Microsoft Office, Microsoft Project, AutoCAD etc.
• Candidates with proactive attitude and responsibility good collaboration experiences in construction project.

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Key Responsibilities:

• Develop, execute, and document testing protocols for semiconductor manufacturing equipment, ensuring compliance with industry standards and internal quality benchmarks.
• Leverage your knowledge of backend semiconductor manufacturing processes to inform testing methodologies and validate equipment performance in real-world scenarios.
• Work closely with R&D engineers, product managers, and other stakeholders to define testing requirements, analyze data, and recommend improvements.
• Utilize statistical analysis and data interpretation skills to assess equipment performance and reliability, presenting findings to engineering and management teams.
• Ientify and troubleshoot issues in equipment functionality and performance, providing actionable feedback to the engineering team for design improvements.
• Maintain thorough documentation of testing procedures, results, and equipment specifications to ensure knowledge transfer and regulatory compliance.

Qualifications:

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field;
• 5 years of experience in semiconductor manufacturing, specifically in backend processes.
• Strong understanding of semiconductor testing methodologies and validation processes.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills, with the ability to work effectively in cross-functional teams.
• Familiarity with industry standards and regulatory requirements related to semiconductor manufacturing.
• Experience with design of experiments (DOE) and statistical process control (SPC).
• Knowledge of semiconductor manufacturing equipment and processes (e.g., packaging, assembly, testing).
• Previous experience in an R&D environment is advantageous.

Position Summary

The CIM Engineer is responsible for the implementation, maintenance & development of semiconductor automation facilities.

Candidates with Semiconductor, LCD industrial automation industries or smart factory / CIM experience are encouraged to apply for this position.

Key Responsibilities

• Development and maintenance of Quality Management system (QMS), Facility Automation (MC) system and Logistics automation (MCS) system.
• Responsible for new automation requirement, system survey, any modifications or improvement works.
• Identify equipment failures, root cause analysis, and recommend solution for technical issues.
• Provide cross-functional cooperation and vendor interaction to troubleshoot, analyze and develop solutions for problems involving integrated systems.

Requirement

• Bachelor’s Degree in Engineering, Computer Science, IT or similar.
• More than 5 years of experience in related field including 3 years of development experience.
• Team player with strong analytical and problem-solving skills.
• Experience in the following:

1. Programming languages (C, C#, .Net, etc.) and DBMS (Oracle, MS-SQL, etc.)
2. SECS-I, SECS-II, HSMS/GEM, OPC, TCP/IP
3. Facility and supersystem (MES, EMS, etc.) interface
4. Logistics AGV, ACS for OHT control, OCS
5. Smart factory/CIM implementation experience

Preferred Qualifications

• Quality related implementation and operation (SPC, TAMS, YMS, DMS, RMS, etc.)
• Facility interface experience through facility automation solution
• MCS solution R&D experience

• Position: Project Engineer (CONSTRUCTION)
• Location: Paya Lebar Quarter
• Working Hours: 6 days work week
• Salary (commensurate with experience): Up to $5,500 + 14 Days Annual Leave + Performance Bonus + Medical/Dental Benefits
• Duration: Permanent
• Industry: Fireproofing

Main Responsibilities:

• Responsible for the smooth completion of the assigned project, in terms of both documentations and operational aspects
• Attend site meetings with the Main-Contractor whenever necessary
• Plan and make sure site work progress follows the Schedule
• To work closely with office staff to prepare monthly Progress Claims, Payment Certificates
• To ensure the works are executed in accordance with approved plans/drawings and in accordance with contract specifications
• Manage and account for all materials & equipment delivered to site
• To manage workers’ time schedule
• Any other ad hoc duties assigned

Requirements:

• Minimum Diploma in M&E, Construction Management or equivalent
• At least 1 year relevant work experience
• Possess good communication skill to manage project team and stakeholders

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Position : M&E Coordinator/Engineer (A&A Industry) - Up to $5,500 - All Welcome
• Location : Based on Project Sites
• Working hours : Monday to Saturday | 8am to 6pm (Saturday working hours based on site)
• Salary (commensurate with experience) : Up to $5,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Assist M&E Manager in coordinating M&E specific works on site.
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing OA/QC inspections to meet wi construction schedule.
• Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices.
• To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendor
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance to daily site co-ordination meeting and provide detail co-ordination with sub contractors.

Requirements:

• Minimum of Diploma in M&E Engineering or relevant; with at least 2 years of experience.
• Willing to work on weekends if site required.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : ALL WELCOME - Technical Sales Engineer (NO EXP REQUIRED/TRAINING PROVIDED) - Up to $4500
• Location : West – Bukit Batok Crescent
• Working hours: Monday to Friday | 8.30am to 5.30pm
• Salary (commensurate with experience) : Up to Basic of $4,500 + Average Incentives of $1,000 + AWS + Variable Bonus + Transport Reimbursement/Allowance + Mobile Phone Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Automation

Main Responsibilities:

• Responsible for preparing quotations, proposal according to customer’s requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analysing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products..

Requirements:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/Mechanical
• No experience required/ Entry level candidates are welcome to apply
• Training on products will be provided
• Bilingual in English and Mandarin to communicate with colleagues who can only speak in mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

The key functions of Process Engineer is to:

1. Applies Engineering principles and techniques to optimise production process in the fab to meet department and organization goals and objectives

2. Analyse and troubleshoots process engineering, manufacturing, and maintenance issues, and recommend engineering solutions or developed work instructions for out of control processes

3. Leads production and manufacturing systems, improvement projects and develop operation plans in accordance with department and organization objectives alighn with regulatory requirements.

Tasks:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 5 years of relevant work experience in Thin Film CMP Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Involve revese enginnering based on part given.
• Create the part drawing from the component by measuring and prepare the new cnc program.
• Lead a programmer and machinist to successfully deliver the cam program for precision machined component projects
• Work closely with senior management to prepare quotation and concept dedign for new projects
• Prepare and track schedules for live projects - manage deliverables targets by designers and drafters
• Train and groom new Cnc 3d cam programmer / machinist in company
• Create, maintain and enforce workflow processes to enhance design department efficiency
• Manage team KPIs

1. Assist Project Manager on Engineering efforts in technical projects at Semiconductor fabs in Singapore and occasional overseas.
2. Provide on-site engineering equipment start-ups, mechanical parts installation, trouble-shooting and maintenance support.
3. Acts as a Technical Resources in performing repair of Electro-mechanical Assemblies
4. Facilitates continuous improvement project that add value to customer.

Requirement

At least 1-2 years experience in Semi-Conductor Field

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the respective modules: Etch (Dry Etch and Wet Etch); Photolithography; Diffusion; Chemical Mechanical Planarization (CMP); Chemical Vapor Deposition (CVD) or Physical Vapor Deposition (PVD)

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

General Administrative Support:

• Arrange and manage appointments for uniform collection
• Uniform measurements taking
• Customer Service: phone call management and handling office email
• Support various administrative tasks, such as photocopying, filing, data entry, inventory management, stock taking, rostering and reports preparation.
• Provide general support to visitors.
• Keep track of pest control, photo-copier servicing maintenance, etc
• Manage and maintain office supplies
• Assist with other ad-hoc operational duties as assigned.

Job Requirements

• Minimum 2 years of relevant experience
• Detail-oriented and organized.
• Positive attitude, and willingness to learn
• Working hours: 9:00am - 6:00pm (Mon-Fri)

The team in Singapore is looking for an ICT Security Engineering professional to increase its capability to improve the Bank detection & reaction to Cyber Threats by: Deploying, maintaining, and improving the new SIEM infrastructure. The new joiner will collaborate closely with the Production Infrastructure & Observability teams.

Direct Responsibilities

• Install and administrate the servers of the SIEM Infrastructure
• Develop automation on the different tasks and self-service tool
• Participate in the integration of new technologies logs
• Support logs parsing using custom parser/GROK development.
• Project management
• Be a full-time member of the Production CSIRT / SIEM Engg team and participate to the various activities of the team

Contributing Responsibilities

• Contribute to the Permanent Control framework for the implementation of policies and procedures in day‐to‐day business activities, such as Control Plan.
• Comply with regulatory requirements and internal guidelines.
• Contribute to the reporting of all incidents according to the Incident Management System

Competencies (Technical / Behavioral)

Production experience across the following technologies:

• Candidate must have overall 7 or more years of experience with a minimum 4-5 years on relevant scope ie. Expertise in handling ELK stack for large platform or architecture.
• Working knowledge of Elastic stack (Elasticsearch / Logstash / Kibana / Beats) including data ingestion, management, monitoring & analytics. (Mandatory)
• In-depth experience with Kafka
• Good working knowledge of Linux (RedHat/Ubuntu)
• Programming skills (Python or Bash) is appreciated.
• Experienced production support engineer
• Platform integration skills are a plus - Experience in installation, configuration, documentation, and administration of multiple pre-production and production platforms in both virtual and physical environments.
• Experience & skills in automation tools (e.g. Ansible) & DevOps pipelines are appreciated.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Scope:

Support the Branch in complying in Customs and any other
government agencies’ regulations

1. Declare all different types of shipping permits.
2. Applying Ordinary and Preferential Certification of Origin.
3. Coordinate with the respective departments on supporting documents required. Ensuring all documents are in accordance and timeline to provide approved customs entry declarations with help of pre-customs entry, checklist, Asia Customs SOP, and pre-alert database.
4. Attend to customs enquiries and secure the permit approval.
5. To monitor and ensure all Cargo Manifest Declarations reports are submitted timely to Singapore Customs for both Import and Export permits transactions.
6. Creating file and preparing billing invoice. To ensure data accurate and timely billing to customers.
7. Generating essential customers’ or others reports as required.
8. Updating Asia Customs SOP with customers’ requirements and expectations.
9. Adhering compliance to Expeditors policy and expectations.
10. Maintain Branch procedure on customs entry declarations.
11. Key Performance Indicators are met within customers’ requirements and fulfillment Singapore Customs / Competent Authorities rules and regulations.
12. Performing internal audit for customs filling.  

5 days’s work week with 1 off day and 1 rest day (Sunday) within a calendar week 

Roster     1   -    8:30 am – 6:00 pm (1 hour lunch break) for 4 days

                          8:30 am – 5:30 pm (1 hour lunch break) for 1 day

Roster    2   -    12:00 pm – 21:30 pm (1 hour dinner break) for 4 days

                         12:30 pm – 21:30 pm (1 hour dinner break) for 4 day

Roster     3   -    2:00 pm – 11:30 pm (1 hour dinner break) for 4 days

                          2:30 pm – 11:30 pm (1 hour dinner break) for 1 day 

** Only those who are current residing in Singapore or with Singapore residency need to apply **

The key functions of Process Engineer is to:

1. Applies Engineering principles and techniques to optimise production process in the fab to meet department and organization goals and objectives

2. Analyse and troubleshoots process engineering, manufacturing, and maintenance issues, and recommend engineering solutions or developed work instructions for out of control processes

3. Leads production and manufacturing systems, improvement projects and develop operation plans in accordance with department and organization objectives alighn with regulatory requirements.

Tasks:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 5 years of relevant work experience in Thin Film CMP Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Position

Assistant Process Engineer

Reports To

Process Engineer

Job Overview

The Process Engineer helps in the technical processes of the Production Department. He/She ensures that the Processes and Methodology within the Production Department is technically sound and cost efficient.

He/She analyses Production and Relevant External Data for the Process Engineer to come up with New Strategies to Raise the Efficiency of Operations and Processes in the department. These include Assessing Viability of New Machinery, Introduction of more efficient tooling and Optimisation of important Production Parameters. He also collaborates with other departments such as QC/QA and Planning in Turntech Precision to ensure the Organisation’s KPIs are met.

Most importantly, he/she also is hungry to learn to get up to speed with his/her peers. He/She should also be a team player with the hard and soft skills to direct and motivate his/her teammates to reach production goals.

In this role, we hope to nurture leadership qualities to take charge and ownership of continuous improvement initiatives to further enhance the effectiveness of his/her department.

What your day-to-day will look like (EXPECTED TO PICK UP):

• Assessing Project and Resource Requirements
• Determining Production Quality Control Standards
• Overseeing all Technical Processes
• Organising the Repair and Routine Maintenance of Production Equipment
• Organising Relevant Training Sessions
• Study Energy usage patterns and find ways to save energy
• Assessment of New Methods of Production
• Assessment of New Tooling to aid in Production

You will thrive if you have:

• Min. 1 year of relevant technical and engineering experience
• Bonus: Autolathe or CNC Turning experience
• Strong understanding of the importance on leveraging other people’s expertise
• Willingness to roll up your sleeves and manage “dirty” data (missing or incomplete data sets)
• and produce actionable insights from the data to improve production efficiency
• Creative thinker with strong bias to action exhibiting a “can-do” attitude
• Leadership skills to go beyond the job scope and innovate based on business needs
• Strong team player who can be an active contributor to the leadership, sales, and product and other cross-functioning teams
• You understand the SME culture and can work autonomously in a flat and ad-hoc task-based organization
• Passion for Machining and Mechanical Systems (this industry is not for the faint of heart)

Job Responsibilities:

• Responsible for the operation, maintenance, management and engineering improvement of various systems in the factory, and provide stable supply and quality to customers.
• Operation and maintenance of ultrapure water manufacturing system.
• Operation and maintenance of wastewater treatment system.
• Operation and maintenance of process cooling water system.
• System improvement project and HOOKUP planning and execution

Job Requirements:

• Bachelor's Degree in Mechanical / Electrical & Electronic / Environmental / Chemical Engineering
• At least 1 years of relevant experience in semiconductor industry
• Candidate with relevant certificates are preferred.
• Candidate with FAB facilities systems operation experience are preferred
• Creative problem-solving and troubleshooting skills.
• Emergency response capability.
• Excellent critical thinking skills and a high level of numeracy.
• Good communication and interpersonal skills.
• Able to work independently and able to handle stress effectively.
• Proficient in PPT, Excel & presentation skill