The Warehouse staff in a GDP and GMP secondary assembly area shall work closely with the warehouse team to maintain proper storage conditions, handle products safely, and adhere to GDP and GMP requirements to ensure product quality and integrity. The key responsibilities shall include below:

• Receipt of Products: Receive incoming products and verify the accuracy of shipments against customer pre-alert and provided details. Inspect incoming products for damage, contamination, or discrepancies and report any issues to the appropriate personnel. Ensure that all received products are properly labelled, tagged, and stored in designated areas.

• Storage and Handling: Store products in accordance with labelling specifications, ensuring proper temperature control and segregation of materials. Maintain cleanliness and organization in the warehouse to facilitate efficient storage and retrieval of products.

• Pick and pack for Outbound processing including Pick and pack products in accordance to customer instructions.

• Secondary Assembly: Perform secondary assembly operations on pharmaceutical products based on customer requirement.

• Inventory Management: Work with the warehouse team and perform regular inventory counts and reconcile inventory records to ensure accuracy.

• Compliance Monitoring: Monitor warehouse operations and report any non-compliance. Implement corrective and preventive actions as needed to address non-compliance issues and improve warehouse processes. Participate in execution of quality management system such as change control, risk assessment, CAPA handling and other elements of QMS as may be assigned.

Requirements :

• Strong attention to detail and accuracy

• Ability to work efficiently in a fast-paced environment and meet productivity targets.

• Commitment to maintaining a safe work environment and following all safety protocols and procedures.

• Prior experience in warehouse role especially in the pharmaceutical sector or familiar with GDP and GMP standards will be at advantage

• Training will be provided

Mon-Thu: 0800-1800 with 1hr lunch break

Fri: 0800-1730 with 1hr lunch

1) General cleaning/housekeeping functions to ensure job site cleanliness up to standard based on SOP in all areas of the hospitals, polyclinics, commercial buildings, and airports.

2) Check the condition of the cleaning equipment and the cleaning operation.

3) Meet the cleanliness and hygiene standards and ensure compliance with health & Safety Environmental procedures and practices.

4) Ensure team members report to job sites on time.

5) Other ad hoc duties assigned by the Supervisor.

Requirement:

1) Accept night/morning shift arrangements.

2) Accept and perform hands-on cleaning duties.

3) Accept a working fast-paced environment with stringent and high expectations, especially on hygiene standards.

• 5 days work week
• Location: Central
• AWS & VB provided

Responsibilities:

• Inventory Management:Conduct regular stock checks in the warehouse to maintain accurate inventory records.
  Monitor inventory levels and identify potential stockouts.
  Implement strategies to optimize inventory levels and minimize holding costs.
  
• Import/Export Logistics:Liaise with 3PL companies to coordinate the import and export of goods.
  Prepare and submit necessary documentation for customs clearance.
  Track shipments and ensure timely delivery.
  
• Shipping Arrangements:Collaborate with cross-functional departments (e.g., Sales, Production, Procurement) to plan and coordinate shipping arrangements.
  Negotiate freight rates with carriers and select the most cost-effective shipping options.
  Oversee the loading and unloading of goods.
  
• Logistics Process Improvement:Identify areas for improvement in logistics processes and implement solutions to enhance efficiency and reduce costs.
  Stay abreast of industry best practices and new technologies in logistics.
  

Qualifications:

• Diploma or Degree in Logistics, Supply Chain Management, or a related field.
• Minimum [Number] years of experience in a logistics role.
• Strong understanding of import/export procedures and customs regulations.
• Proficiency in using logistics software and ERP systems.
• Excellent communication, interpersonal, and negotiation skills.
• Strong analytical and problem-solving skills.
• Ability to work independently and as part of a team.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Company description

Wise Oaks International School is an established school based on Cambridge Curriculum enhanced with Singapore methodology for Math's teaching. We value our employees and our vision is to be the most sought after school by Parents, Students and Educators alike. We aspire to build a long lasting relationship amongst all the key stake holders - Students, Parents and Educators.

Job Description

Job Summary:We are seeking a dedicated and organized Schools Operations Executive to oversee the day-to-day operations of our school. This role will involve managing school transport operations, maintaining an inventory of school assets, and ensuring the smooth functioning of school activities.

Key Responsibilities:

• Manage and oversee day-to-day school operations to ensure efficient functioning.
• Coordinate and manage all aspects of the school's transport operations, including working closely with transport vendor(s) and parents for smooth day to day transport deployment and operations.
• Maintain an accurate inventory of school assets, including, Books, Uniforms, furniture, equipment, and supplies, ensuring proper usage and maintenance. Candidate will work on School's Inventory management system.
• Collaborate with faculty, staff, and external stakeholders to facilitate a productive learning environment.
• Assist in the development and implementation of operational policies and procedures.
• Address any operational challenges that arise promptly and effectively.
• Support budgeting and financial management related to school operations.
• Foster a collaborative team environment to promote teamwork and communication.

Qualifications:

• Basic degree in any discipline.
• Minimum of 3 years of experience in an operations executive or manager role, preferably in an educational setting.
• Excellent communication and interpersonal skills to effectively interact with staff, parents, and students.
• Strong teamwork capabilities with a focus on collaboration and support.

Skills and Competencies:

• Strong organizational and multitasking skills.
• Proficiency in using computer applications for data management and reporting.
• Ability to assess problems and implement solutions effectively.
• Familiarity with school management systems or operations is a plus.

· Compliance with requirements of the Safety Management System

· Operate and monitor process plant, relevant marine and utility systems in accordance with operating procedures and as directed by the Central Control Room and Facility Supervisors

· Identify and report operational deviations to facility management.

· Identify and report process, utility or marine system problems requiring maintenance intervention.

· Carry out housekeeping, routine cleaning including pressure washing and de-greasing of equipment and deck areas, waste collection and disposal.

· Carry out first line maintenance on process and utility systems in accordance with operating procedures.

· Support the preparation of equipment and systems for safe handover to maintenance and safe reinstatement and testing thereafter.

· Take samples from the process and utility systems under the direction of the Laboratory Technician.

· Assist the Laboratory Technician in sample analysis; undergo training in laboratory duties as required.

· Liaise with other departments for coordination of maintenance activities.

· Inform Senior Technicians / Supervisors / OIM of any issues relating to safety or facility operability.

· Identify and report equipment faults and breakdowns and use IFS to generate corrective work orders if required.

· Responsible to provide clear and concise daily work logs that have occurred during the shift and give a comprehensive handover to back-to-backs of all events and information relevant to time on duty. This will include an update on all changes in plant conditions, changes and additions to standing and daily instructions and, as required, the status of work permits within assigned area. Handovers are regarded as critical to the safe operation of the FPSO systems and equipment

· Assist in any other work as directed by facility management.

· Participate in the Emergency preparedness drills, safety meetings, and on the job training as required.

· Perform Emergency Duties as required by the Emergency Response Plan

Benefits:

Meals provided

21 days annual leave

Health insurance benefit

Medical benefit

Dental benefit

POSITION OVERVIEW:

As an Operations Manager, you will play a crucial role in overseeing and optimizing the logistical and operational aspects of our business. Your responsibilities will include planning delivery routes, vehicle management, buffet monitoring, warehouse cleanliness, kitchen hygiene compliance, scheduling, stock management, on-site driver spot checks, client meetings, site reconnaissance, and troubleshooting during events.

KEY RESPONSIBILITIES:

Schedule and Delivery Planning:

• Plan efficient delivery routes for the next day, considering time, distance, and traffic conditions.
• Check orders in advance on the system to plan schedules and allocate manpower effectively.

Vehicle Management:

• Monitor and ensure the proper status, mileage, servicing, and fuel levels of all company vehicles.
• Regularly check and maintain the condition of driver vehicles to ensure safety and optimal performance.

Quality Assurance:

• Check and monitor daily buffets when the team is delivering food, ensuring quality and adherence to standards.
• Conduct spot checks on drivers during on-site setups to ensure adherence to operational standards.
• Ensure that the operations team follows kitchen hygiene protocols when entering the kitchen or handling food.

Warehouse and Storeroom Management:

• Ensure cleanliness and organisation in the warehouse/storeroom for efficient operations.
• Monitor and manage stock levels to prevent shortages or excess inventory.

Event Preparation:

• Attend meetings with clients, particularly for significant events, to discuss logistics and operational requirements.
• Conduct site reconnaissance to familiarize yourself with event locations and logistical details.
• Inspect delivery locations for details on loading/unloading bays, ensuring seamless delivery for drivers.

Event Management:

• Attend events and ensure both BOH and FOH are well coordinated.
• Address and rectify any sudden issues that arise during events to ensure smooth operations.
• Address and rectify any incident.

Requirement:

Catering experience is a must

Valid Class 3 licence

2 years experience in leading a team

Attention to detail

Willing to work outside of regular office hours

A well-established security company is inviting applications for the position of Operations Director (Male or Female).

Requirements:

• Must be a graduate (degree holder).
• At least 3 years of experience in a senior position with the SPF (retirees will be considered), or a minimum of 5 years of experience in the security industry.

Job Description:

The selected candidate will be fully responsible for the day-to-day operations of the company, reporting to the Managing Director, and will also handle administrative duties. This position involves managing more than 100 permanent security officers and may require working irregular hours, 6 days a week.

Compensation:

• A starting monthly salary of no less than $8,000 to $9,000, with own transportation required.

Interested candidates are invited to submit their full resume to: [email protected].

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Job Highlights:

• Working with world's leading company in SMT / PCB / semiconductor industries.
• Attractive salary package: AWS, variable bonuses, comprehensive medical coverage.
• Career growth opportunities with trainings provided.

About the Company:
Our client is a global technology company and a market leader that develops and provides leading-edge solutions in surface mount technology, equipment and materials for the semiconductor assembly and packaging industries.

Role Overview:
Join our client's dynamic team as a Software Engineer or Senior Software Engineer, where you will develop and manage cutting-edge solutions for SPI, factory line systems, and associated modules. The role demands technical expertise, creativity, and a strong focus on quality to deliver scalable and maintainable software solutions. Senior candidates will additionally lead complex design tasks, mentor junior engineers, and drive innovation in a competitive landscape.

Key Responsibilities:

• Design, develop, and maintain software solutions for SPI and factory line systems, focusing on quality and scalability.
• Provide effective solutions for production units and address customer requirements with a balance between functionality and time-to-market.
• Solve complex engineering problems using innovative approaches and technical analysis.
• Conduct technical reviews and provide evidence of appropriate solutions to customers.
• Stay updated on industry trends through continual professional development.
• Guide junior team members (for Senior roles) and support their growth.
• Perform any additional ad-hoc duties as assigned.

Requirements:

• Bachelor/Master Degree in Engineering or a related discipline.
• A minimum of 3–5 years of relevant working experience, depending on the role.
• Strong experience in software design, analysis, and validation of engineering requirements.
• Proficient in C++, UML, and the appropriate usage of design patterns.
• Familiarity with Source Control Systems, Visual Studio, and Software Development Lifecycle.
• Knowledge and experience in hardware systems, real-time control systems, Unit Testing, Dependency Injection, and WPF are advantageous.
• Demonstrated ability to balance functional design with time-to-market considerations while maintaining scalability and maintainability.
• Senior candidates should have experience mentoring junior engineers and leading complex software design tasks.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

Job Responsibilities:

• Supervise cold-store operations to ensure that picking & packing activities are executed accurately and efficiently.
• Ensure order accuracy before releasing goods for delivery
• Monitor inbound and outbound stocks, and ensure inventory is promptly and accurately updated in ERP system
• Manage stock transfer and adjustments
• Perform scheduled stocktaking and inventory checks and highlight discrepancies / anomalies.
• Identify, investigate and resolve inventory discrepancies and ensure they can be reconciled.
• Review the workflow and liaise with the respective department to put in place preventive measures to reduce stock loss
• Determine and highlight slow moving, obsolete and near expiry stocks in store for Management actions.
• Manage reconciliation of damage stocks and aging stocks
• Prepare & Submit Weekly Inventory Report to management
• Participate in internal and external audit stock takes
• Other Ad Hoc projects or responsibilities as required or assigned by Head of Operations

Other Requirements:

• Good planning & organizational skills
• Problem solving and good leadership skills
• Must have a working knowledge of GMP concepts and guidelines
• 5.5 Day or 6 Day (Alternate) work week

Education, Experience & Training

• 3 years of experience working in food manufacturing / cold store or similar environment
• Minimum 2 years of supervisory experience in food manufacturing / cold chain
• Possess a valid forklift license (preferable)
• Experience in Microsoft Navision is highly advantageous.

1. Job Description

· Prepare and provide responses for tender bidding, submission of relevant costs spreadsheets and profitability analysis.

· Managing contractual claims to protect commercial interest.

· Prepare requests for proposals for distribution to vendors.

· Analyze all requirements and provisions in contracts, including terms and conditions, to ensure compliance with all laws and regulations and company policies and procedures.

· Ensure that contracts are executed in accordance with guidelines.

· Analyze a contract’s risk to the business.

· Visit client sites and meet with business partners.

· Communicate contract implementation to team members and other internal stakeholders.

· Lead complex contract negotiations and manage all changes and addendums to existing contracts.

· Ensure that all raw material used meets the specified requirements.

· Prepare reports on the status of contracts for the Management

· Establish margins for overheads and profits in tender sums.

· Drive cost planning and control.

2. Administrative works

· Communicate payment regime to relevant stakeholders.

· Attend project meetings.

· Prepare valuations for interim payments and/or recommendation for payment to contractors, specialists and sub-contractors including recommendations for payment.

· Measure variation of cost claims.

· Prepare final accounts and/or relevant pricing variations.

3. Team Management

· Establish good working rapport with colleagues, to improve work processes, productivity and hit rate of tenders.

· Ensure that team members have a complete understanding of the project scope of works.

· Conduct/participate at briefings and regular meetings.

Requirement:

· Good communication skill is needed for discussion with both internal and external members, such as the sales, designer, production, operations, subcontractor, and suppliers.

· Familiar with the use of MS applications, such as Words, Excel, PowerPoint, and Outlook

· Conflict management and problem-solving abilities.

· Independent, positive attitude, strong sense of responsibility.

· Prior project management experience is preferred (1-3yrs)

· Good with numbers which will be meant for computing costing and on-site measurement.

· Knowledge in filing system and processes

· Proficiency Mandarin is an advantage.

Benefits:

· 5.5 days’ work week (weekend attendance only when required)

· 2% commission based on the net profit value.

· Staff pantry

· Medical, dental, transportation ($200- $300), and mobile phone bill ($50) reimbursement

· Friendly and conducive environment

· Flexible working arrangement

· Clear career advancement

Join Skyy Design Workshop to realize your true potential!

Kindly email your resume/CV to [email protected] and attention to HR Manager.

The Manager will be responsible for overseeing automotive maintenance projects and supporting the Engineering and Operations Control team through innovation and data analysis. The role requires expertise in project execution, optimizing maintenance processes, and leveraging data analytics to drive operational efficiency. The Manager will also play a key role in implementing technological advancements and continuous improvement initiatives to support business objectives.

Key Responsibilities:

1. Project Management for Corporate Fleet:

• Oversee projects, from planning and execution to monitoring and closure.
• Ensure all maintenance activities align with safety standards, quality control, and regulatory compliance.
• Coordinate with cross-functional teams to ensure timely and cost-effective project delivery.
• Manage project timelines, budgets, and resources effectively.
• Track and report project progress to senior management and key stakeholders.

2. Support Engineering & Operations Control:

• Collaborate with workshop operations teams to drive improvements in fleet maintenance operations.
• Develop and implement data-driven strategies to enhance operational performance, including efficiency, productivity, and resource utilization.
• Use data analytics and KPIs to monitor and evaluate the performance of maintenance processes.
• Assist in the development of dashboards and reporting tools to provide real-time insights into maintenance performance and equipment health.

3. Innovation & Continuous Improvement:

• Identify opportunities for innovation and process improvement in automotive maintenance operations.
• Stay up-to-date with the latest trends in automotive engineering and operations control to ensure the company remains competitive.

4. Stakeholder Collaboration:

• Work closely with internal teams (Engineering, Operations, IT, etc.) and external partners (vendors, subcontractors, etc.) to ensure alignment on project goals and execution.
• Engage with senior management to align project outcomes with business strategy.
• Provide technical guidance and support to the maintenance and operations teams.

5. Resource & Team Management:

• Lead training initiatives to ensure that teams are proficient in the latest tools and technologies related to automotive maintenance.

Key Qualifications:

• Bachelor’s degree in Mechanical Engineering, Automotive Engineering, or related field.
• Minimum of 5-7 years of experience in automotive maintenance, project management, or engineering operations control, with at least 2 years in a managerial or supervisory role.
• Proven experience managing complex automotive maintenance projects. PMP or similar certification is advantageous.
• In-depth knowledge of automotive systems, fleet maintenance, and data analytics.
• Strong analytical skills and experience with data analysis tools to optimize operations.
• Experience implementing new technologies, driving process improvements, and promoting innovation.
• Strong written and verbal communication skills, with the ability to influence stakeholders and present data-driven insights.

Competencies:

• Strong problem-solving and critical thinking skills.
• Proactive approach to identifying and implementing solutions.
• Ability to manage multiple priorities and projects simultaneously.
• Ability to work effectively in a fast-paced and dynamic environment.

Working Conditions:

• Office-based with regular visits to automotive maintenance sites and operations centers.
• Occasional travel may be required to meet with external vendors and stakeholders.

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Responsibilities:

• Oversee the construction activities and progress, plan, implement, and monitor work
• Schedule following the master and detailed work program
• Liaise with a Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle technical and engineering problems
• Guide supervisors about construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep the site safer and neat
• Supervise ongoing site activities closely

Requirements:

• Diploma in Civil Engineering or equivalent
• must have Lifting Engineer Certification for a Senior role
• Experienced in Singapore underground project, D/wall, and other structural works
• Minimum 2 years of relevant experience in LTA Project is preferred
• willing to work 6 days and/or 5.5 days per week

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

ABOUT THE ROLE

As a Product and Operations Manager, you will be responsible for the installation, maintenance, and troubleshooting of LED lighting systems. Your role involves working with various LED technologies, ensuring optimal performance, and provide technical support. This position requires a combination of technical expertise, problem-solving skills, and a commitment to deliver high-quality LED solutions. You would also be responsible for the selection of suitable LED products, and vendors for various projects.

RESPONSIBILITIES

1. Installation and Configuration: Install and set up LED lighting systems in accordance with specifications and industry standards.
   Configure LED controllers, drivers, and associated components to ensure seamless functionality.
2. Maintenance and Upkeep: Conduct routine inspections and assign technician maintenance of installed LED systems to identify and address any issues promptly.
   Replace faulty components and perform upgrades to enhance system performance.
3. Programming and Tuning: Program LED controllers and drivers to achieve desired lighting effects and meet customer requirements.
   Fine-tune LED systems for optimal brightness, colour accuracy, and energy efficiency.
4. Troubleshooting: Diagnose and troubleshoot technical issues with LED installations.
   Collaborate with cross-functional teams to identify and implement effective solutions.
5. Quality Assurance: Ensure that all LED installations meet quality standards and comply with safety regulations.
   Conduct testing and validation procedures to guarantee the reliability of LED systems.
6. Customer Support: Provide technical support to customers and address inquiries related to LED systems.
   Offer guidance on best practices for optimal system performance.
7. Understanding NovaStar system, ColorLite & Huidu system. Maintain cloud technologies Vnnox and Colorlight for LED content management.
8. LED Project planning and assign resource allocation to execute the project.
9. Laise with Vendor on the LED specification and delivery.
10. Onsite LED survey, LED design, specification and measurement.
11. Provide LED recommendations to customers and sales
12. Support sales in the quotation and tender bidding.

REQUIREMENTS

● Diploma or Degree in Electrical Engineering, Electronics, Mechatronics, or related field

● 2-5 years working with LED systems (Installation, Maintenance, Troubleshooting)

● Familiar with LED technologies like NovaStar, ColorLite, Huidu, Colorlight and Vnnox

● Experience in project planning, resource allocation, and working with various vendors

● Strong technical expertise in LED systems, programming and tuning controllers

● Knowledge of quality assurance and safety regulations for LED installations

● Customer support and communication skills

● Project management capabilities and willingness to travel for site visits and review installations by technicians

● Strong problem-solving skills and ability to work independently

Responsibilities:

• Manage and supervise a team in the operations department.
• Ensure seamless daily operations for air and sea freight shipments.
• Address challenges and resolve issues related to operations.
• Uphold discipline and professionalism within the department.

Requirements:

• Lead, manage and supervise staff
• Degree in Supply Chain/Logistics or Business or related field.
• At least 2 years of working experience in a similar industry.
• Profound expertise in ocean and air freight industry.
• Strong knowledge of Customs regulations, airline protocols, and shipping line procedures.
• Proficient in using MS Office Applications.
• Good in presentation and negotiation skills.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R23117344

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

We Are

YouTrip is at the forefront of Asia's financial revolution, defining the future of digital finance with its leading multi-currency payment platform. Launched in 2018, YouTrip has swiftly ascended as a powerhouse, orchestrating billions in transactions annually and securing the trust of millions. With innovative solutions like YouTrip for consumers and YouBiz for businesses, we offer unmatched financial ease and cost-effectiveness. Fresh off a successful US$50 million Series B funding round led by Lightspeed Venture, we're setting new benchmarks in the digital financial services sector.

At the heart of our mission is a commitment to eliminate financial borders across Asia, propelling us into the next wave of digital finance.

You will:

• Support our CFO in managing FinOps & Treasury on market expansion strategies and executing licensing, partnerships and M&A opportunities
• Manage and mentor a team of treasury and FinOps professionals across jurisdictions, fostering a collaborative and growth-oriented work environment.
• Oversees overall settlement operations and chargeback process
• Streamline and optimise business process and operations, iIdentify and manage risks
• Define and calibrate operational metrics on KPIs and OKRs for efficiency and accuracy
• Analyze (often ambiguous, unstructured) operational and business problems to identify areas for commercial growth, efficiency gains, and cost reduction
• Create and maintain documentation related to operational processes and improvements
• Implement automation strategies to minimise manual processes and optimise operational efficiency in payment workflows.
• Work with the product and engineering teams to ensure FinOps and treasury requirements are built into the payment product lifecycle.

You have:

• Bachelor’s degree in Business, Finance, Accounting, Economics, or a related field
• 10+ years of experience in financial operations and treasury management, preferably within fintech, payments, or banking sectors.
• In-depth knowledge of payment processing, settlement, and reconciliation workflows, with experience in high-volume transaction environments.
• Strong analytical and problem solving skills
• Self-starter who can identify and prioritise opportunities to focus on

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 4 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.