The New Product Introduction (NPI) process engineer will provide Dermcut Medical Pte Ltd with technical support and operating knowledge for our medical device operation. This role will conduct critical engineering functions such as product validation, troubleshooting, identifying and implementing process improvements.

The engineer will work closely with project manager and is in charge of taking the prototype from pilot scale into full scale manufacturing in support of commercial efforts. This position will focus on developing various processes and implementing those to support mass production.

Primary Responsibilities

• Establish processes based on product specifications.
• Develop control plans, gage repeatability & reproducibility, test method verification & validation, and pFMEA.
• Identify areas of process improvement to reduce and minimize process related nonconformance incidents and to maximize efficiency of the process.
• Co-ordinate the generation of dossier including but not limited to design files, technical files and project files to include design outputs, shelf-life studies, biocompatibility, sterilisation, risk analysis, validation master plans, IQ's, OQ's, PQ's and test regimes.
• Responsible for screening and optimization of process parameters to achieve robust and stable processes and maximize yields, efficiencies and process capabilities.
• Perform other related duties and responsibilities as assigned.

Education / Experience Requirements

• Bachelor’s degree in process engineering or similar qualification.
• A minimum of 2 years’ experience in the medical device industry.
• A strong understanding of validation strategy (IQ/OQ/PQ), support protocols and reports.
• Experience in root cause analysis of technical discrepancies/abnormalities.
• Familiar with FDA documentation requirements, ISO 13485 quality management system, lean manufacturing, and good manufacturing practice.
• Experience with SolidWorks and Microsoft Project preferred.

Job Description & Requirements

Responsibilities

• Coordination of Mechanical,Electrical, P&S design and installation.
• Ensure all works are carry out accordingly to drawings, specification, and compliance to authorities’ requirements.
• Site coordination and manage M&E personnel on work progress, drawings,material, samples, method statement submission and approval, to ensure quality and timely completion.
• Manage and Coordinate SWC.
• Preparation of CSD & SEM or CCSM drawings.
• Monitoring of construction installation, field coordination and provide necessary problem solving.
• Carry out testing requirement, inspection with consultants.
• Conduct T&C and Handover to Client.
• Proper documentation of all test report, equipment records and As-built drawings.
• Supervision of workers and sub-contractor to ensure safety and compliance of work on site.
• Adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship.
• Other duties as assigned.

Requirements

• Minimum 5 years of engineering experience with Recognized Degree in relevant field.
• Minimum 3 years of supervision experience of E&M work in construction site for projects of similar scale and complexity.

Responsibilities:

• Responsible for providing technical expertise and leadership in the development, support, and management of the system.
• This includes developing new applications and supporting existing applications.
• Applying software engineering principles to analyze and problem-solve, and design a solution
• Developing and executing project plans
• Lead and/or guide junior software developers
• Creating functional and technical specifications
• Designing and developing test cases
• Adopting Agile methodologies to develop software
• Analyzing existing systems to provide recommendations for improvement
• Ensuring proper documentation
• Monitoring system performance and performing predictive maintenance
• Performing system risk and reliability analysis
• Assessing new technologies before adoption and implementation

Requirements:

• Minimal Bachelor of Bachelor or above degree in Computer Science, Information Technology, or similar preferred.
• At least 5-7 years of experience in system development and support.
  Strong technical skills in Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI, DevOps and GitHub.
• Excellent analytical and problem-solving abilities.
• Strong communication and interpersonal skills.
• Ability to manage multiple projects and deliverables simultaneously.
• Develop and support systems using Java, Spring Boot, Angular, Oracle SQL, Power Automate, Power Apps, and Power BI.
• Provide technical support and training to users.
• Troubleshoot and resolve system issues.
• Participate in business analysis and technical design sessions.
• Ensure compliance with industry regulations.
• Document system processes and present progress reports.
• Collaborate with team members and other departments to ensure smooth operation.

The Security Architect Head will shape and manage security architecture across all layers of the organization’s systems, protecting critical assets and ensuring regulatory compliance.

Key Responsibilities:

· Act as the security architecture expert, ensuring alignment with regulations.

· Design, implement, and maintain robust security solutions across various layers, including OS, applications, infrastructure, and integrations.

· Establish multi-layered security controls to build resilience.

· Conduct reviews to strengthen the security posture and ensure regulatory compliance.

· Develop and oversee the organization’s cloud security strategy using modern technologies and native services.

· Mentor and develop the Security Engineering team, fostering a learning culture.

· Engage with stakeholders to integrate security into business solutions and manage expectations.

Requirements:

· Degree in Computer Science, Computer Engineering, or Information Security.

· 12+ years of experience, with 5+ years in security architecture and 3+ years in team leadership.

· Proficient in AWS Cloud Security Engineering and DevSecOps SDLC.

· Security certifications like CISSP, CISM, CCSP, CISA, or AWS Certified Security are preferred

· Hands-on experience in managing complex security engineering and solution implementation in the FI industry is an advantage

· Knowledge of regulatory requirements and industry practices (e.g. MAS TRM Guidelines, MAS Cyber Hygiene etc.)

Role Overview:

Our client is looking for a Technical Support Specialist to join our team in Singapore. In this role, you will be at the forefront of our Electronic Shipping Solutions (ESS), helping customers integrate and maximize the benefits of our solutions. You will be responsible for delivering technical support, managing deployment projects, and driving continuous improvements in the adoption and success of our client's ESS.

Key Responsibilities:

Customer Engagement:

• Deliver engaging presentations to customers, showcasing the benefits of Electronic Shipping Solutions (ESS).
• Assist customers with onboarding and guide them through the implementation of ESS.
• Provide on-site and remote technical support to resolve issues and queries related to ESS.

Technical Support & Escalation:

• Act as a technical escalation point, resolving complex issues related to ESS.
• Ensure all solutions are configured and maintained according to IT policies, including version control and label format management.

Project Deployment:

• Proactively plan and manage the deployment of ESS, ensuring timelines and targets are met.
• Collaborate with the commercial and project teams to ensure successful ESS implementations.

Continuous Improvement & Innovation:

• Contribute to the continuous improvement of our solutions and processes, driving efficiency and customer satisfaction.
• Collaborate on various initiatives aimed at improving ESS services.

Customer Facing IT Helpdesk Support (Backup Role):

• Provide backup support for the Customer Facing IT Helpdesk, assisting with ESS-related queries and problems.

Key Performance Indicators (KPIs):

• Achievement of customer-facing IT objectives and deployment timelines for eCommerce tools.
• Meeting country and regional targets for ESS implementations.
• Timely and accurate reporting on project progress and performance.

Qualifications & Requirements:

Educational Requirements:

• Degree in Information Services or equivalent.

Experience:

• Minimum 2 years of experience in IT customer support, with a preference for candidates with experience in the eCommerce industry.
• Senior-level candidates should have 4-5 years of experience in a similar IT support role.
• Fresh Graduates are also welcome to apply

Technical Skills:

• Excellent IT skills with a strong understanding of eCommerce technology.
• Proficient in software tools (Word, Excel, PowerPoint)
• Strong analytical, organizational, and technical troubleshooting skills.
• Basic coding skills

Soft Skills:

• Strong presentation, communication (both spoken and written), and negotiation skills.
• Proven ability to influence decisions and work collaboratively across teams.
• Ability to manage multiple priorities and work effectively under pressure.

Competencies & Leadership Traits:

• Results Orientation: Demonstrates focus on achieving goals, overcoming obstacles, and delivering measurable results.
• Teamwork: Collaborates effectively with others to achieve shared goals and objectives.
• Adaptability: Remains optimistic and resilient in the face of challenges, managing uncertainty and change positively.
• Communication: Provides clear, concise, and timely information to internal and external stakeholders.
• Accountability: Acts with integrity, taking responsibility for actions and commitments.

Career Development:

• Next Steps: Possible career growth opportunities include roles such as Program Manager, Integration & Solutions or Project Manager.
• Feeder Roles: Candidates with technical support experience or a background in eCommerce-related IT services will be ideal for this position.

For quick response, applicants who express interest in this job advertisement, kindly contact 84945469.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.**

We wish you all the best in your career search.

EA Personnel Name: Jess Clarke
EA Personnel No: R24123918
EA License No: 03C5577

RED an expanding international M&E consultancy, with a proven track record in low energy design, focused on providing excellent design solutions to clients.

We now seek an experienced Principal Electrical Engineer to be based in our Singapore office to inspire others. You will have the ability to run small and large sized projects, undertake a client facing role in the development, design, and co-ordination of engineering projects You will have experience in the delivery of data centres along with other sector experience including commercial, hotel, retail, and hotel design desirable.

Your excellent communication and interpersonal skills, both with colleagues and clients, and experience working on innovative projects with leading client organisations, and contractors will equip you to take a future pro-active role in forging client relationships of our sector portfolio.

You will possess good commercial awareness, in addition to having robust technical knowledge relevant to building services design, and capable of incorporating those technologies into the hotel / hospitality and leisure sector. The position will ideally suit someone who is currently working in building service consultancy and is prepared to work ‘hands on’.

Job Description

Responsible for the running of large projects. Undertakes a client facing role in the development and design and coordination of engineering project services for Electrical installations, systems, equipment, facilities etc. (Several building types)

• Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes
• Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations
• Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements
• Day to day decision making on project progress and direct liaison with and provides advice to client
• Represents Company at technical meetings with customers, professional teams and contractors teams
• Ensures engineering calculations and drawings meet required robust industry and legal standards
• Leads on the coordination of engineering services

Takes a holistic view in the selection and application of engineering concepts and solutions

Qualifications / Experiences

• BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience
• MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent
• Working towards Chartered Eng status
• Significant experience of specification design for several building types
• Sound knowledge of key Health and Safety issues and legislatio
• Knowledge of MS Office applications word, excel etc
• Ability to use IT based calculation and spreadsheet softwar
• Good understanding of BS standards/ UK Regulations/Codes
• Ability to prioritise own workload
• Ability to work to deadlines
• Managerial skills
• Presentation skills

If you think you have what it takes to join an award winning team and help RED continue its exciting journey, we want to hear from you!

Responsibilities:

• Supervise/perform fault diagnosis, trouble shooting and maintenance of power system/component in workshops and onboard vessels
• Liaise with various departments within company and client to expedite the scope of work
• Lead a team of electricians in corrective and preventive maintenance
• Prepare work completion reports for Customer's Acceptance.
• Perform maintenance works in accordance with vessel safety requirement
• Conduct in-depth troubleshooting of electrical connections and Programmable Logic Controllers (PLC) programs.
• Coordinate with vendors and partners, conduct design reviews with customers, and maintain documentation according to our ISO quality systems.

Responsibilities:

• Liaise with appointed engineering firm and internal stakeholders
• Responsible for end-to-end project delivery, execution and documentation
• Participate in cross functional internal/external discussions for project execution
• Responsible for timely delivery and completion of project milestones and updates
• Ensure project completion within allocated budget expenditure

About You:

• Minimum 4 years of experience in the pharmaceutical industry
• Clean Utilities experience is preferred

Duration : 12 months. Option to extend/convert subject to performance review.

Design, code, test, implement, maintain, and support application.

Creates technical system designs that meet the business needs.

Delivers quality solutions with minimal rework.

Work independently on high complexity designs & programs.

Follow and help to establish architectural standards.

Estimate effort and write technical specifications that accurately reflect the design requirements and standards.

Create functional code from design specifications for new development, enhancements, or maintenance projects.

Database constructs and create database design specifications associated with new development or enhancements.

Provide customer support and conduct customer training as required.

10+ years of experience in Microsoft technologies.

Experience with Microsoft Dynamics CRM either in Azure or Government Commercial Cloud (GCC) is a must

Experience in supporting implementing large-scale, highly-available applications or large project implementation using Dynamics CRM

Strong experience with Dynamics 365 Customization and Configuration

Strong experience of the Power Platform (PowerAutomate, PowerApps, Power BI)

Object Relational Mapping (Entity Framework) and ADO.Net

C#.NET, .net core, ASP.NET Web Forms, ASP.Net MVC 4.0, jQuery, JavaScript.

Sound knowledge in Web technology.

Outstanding verbal and written communication skills

Strong troubleshooting skills and attention to detail

*We welcome junior level candidates also to apply!

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

A Cloud Data Engineer specializing in AWS, Databricks, and Informatica IDMC is responsible for building and maintaining a robust, integrated, and governed data infrastructure that leverages the strengths of the analytics platforms to extract valuable insights from data while ensuring data security, compliance, and high-quality data management.

Roles And Responsibilities: • Design and architect data storage solutions, including databases, data lakes, and warehouses, using AWS services such as Amazon S3, Amazon RDS, Amazon Redshift, and Amazon DynamoDB, along with Databricks' Delta Lake. Integrate Informatica IDMC for metadata management and data cataloging. • Create, manage, and optimize data pipelines for ingesting, processing, and transforming data using AWS services like AWS Glue, AWS Data Pipeline, and AWS Lambda, Databricks for advanced data processing, and Informatica IDMC for data integration and quality. • Integrate data from various sources, both internal and external, into AWS and Databricks environments, ensuring data consistency and quality, while leveraging Informatica IDMC for data integration, transformation, and governance. • Develop ETL (Extract, Transform, Load) processes to cleanse, transform, and enrich data, making it suitable for analytical purposes using Databricks' Spark capabilities and Informatica IDMC for data transformation and quality. • Monitor and optimize data processing and query performance in both AWS and Databricks environments, making necessary adjustments to meet performance and scalability requirements. Utilize Informatica IDMC for optimizing data workflows. • Implement security best practices and data encryption methods to protect sensitive data in both AWS and Databricks, while ensuring 1 | P a g e compliance with data privacy regulations. Employ Informatica IDMC for data governance and compliance. • Implement automation for routine tasks, such as data ingestion, transformation, and monitoring, using AWS services like AWS Step Functions, AWS Lambda, Databricks Jobs, and Informatica IDMC for workflow automation. • Maintain clear and comprehensive documentation of data infrastructure, pipelines, and configurations in both AWS and Databricks environments, with metadata management facilitated by Informatica IDMC. • Collaborate with cross-functional teams, including data scientists, analysts, and software engineers, to understand data requirements and deliver appropriate solutions across AWS, Databricks, and Informatica IDMC. • Identify and resolve data-related issues and provide support to ensure data availability and integrity in both AWS, Databricks, and Informatica IDMC environments. • Optimize AWS, Databricks, and Informatica resource usage to control costs while meeting performance and scalability requirements. • Stay up-to-date with AWS, Databricks, Informatica IDMC services, and data engineering best practices to recommend and implement new technologies and techniques.

Requirements / Qualifications Requirements / Qualifications • Bachelor’s or master’s degree in computer science, data engineering, or a related field. • Minimum 7 years of experience in data engineering, with expertise in AWS services, Databricks, and/or Informatica IDMC. • Proficiency in programming languages such as Python, Java, or Scala for building data pipelines. • Evaluate potential technical solutions and make recommendations to resolve data issues especially on performance assessment for complex data transformations and long running data processes. • Strong knowledge of SQL and NoSQL databases. • Familiarity with data modeling and schema design. • Excellent problem-solving and analytical skills. • Strong communication and collaboration skills. • AWS certifications (e.g., AWS Certified Data Analytics - Specialty, AWS Certified Data Analytics - Specialty), Databricks certifications, and Informatica certifications are a plus.

Interested candidates, please email your resume to [email protected] or click apply here

Job Responsibilities:

• Plan and oversee the operations and support activities for the proper running of a major Internet-facing, public-facing application deployed on a cloud-based network.
• Ensure compliance to process, policies, standards, procedures to support governance and compliance requirements, and manage reviews and audits on these compliance requirements for the system.
• Manage procurement activities, contract and vendor admin
• Review system and application activities to detect abnormalities based on provided criteria
• Review existing processes and deliver continuous improvements to keep pace with policy and business process changes, and implement technology refresh for supporting tools and technologies
• Support enterprise level programmes and initiatives
• Manage system retirement and disposal

Job Requirements:

• Recognized Degree/Diploma in Computer Science, Engineering or equivalent
• Min 1 year relevant working experience in full stack development and maintenance

Cyber Security Engineer Job description

- To implement and deploy solutions like SIEM, EDR, and NMS:

o Splunk

o QRadar

o Carbon Black EDR

o SolarWinds NMS

o Other new onboarded products or solutions

- To manage and work/liaise with product vendors, partners, and customers in terms of schedule, expectation, and requirements

- To be able to research and stage test environment for project preparation

- To provide consistent and clear communication to external and internal stakeholders

- To provide informal training to partners and customers

Requirements:

- Diploma/Degree in Computer Engineering, Computer Science, Information Systems or equivalent

- Minimum 2 years of relevant work experience in IT security implementation and deployment

- Minimum 1 year of relevant work experience with relevant product deployment

- Good understanding of operating system technology, such as Unix, Linux, and Windows Server

- Good networking & scripting knowledge

- Technically inclined and hands-on

- Good interpersonal skills, independent, proactive and a team player

- Good communication, presentation, and writing skills

- Able to work independently

- Preferably from a System-Integrator or Distributor background

Department Overview:

Aristos Solutions BU focus on creating customised state-of-the-art automation solutions for all possible industries. By utilising Akribis Systems' direct drive linear and rotary system, we are able to achieve high speed and high precision assembly, inspection or testing solution for our customer.

Job Description

• Application support and setup of motion control system, machine vision system, signal and control devices, used in motion control products and automation equipment
• Design of electrical schematic diagram, single line diagram, cable harness and build, for motion controller systems, device and sensors, used in Industrial automation machine and equipment
• Perform DOE for risk mitigation and feasibility studies on design concept
• Creation of Bill of Material of cables assembly and electrical component used in project
• Review and guides the development of product manual and application notes for new products/applications
• Evaluate and recommend product / solutions for new applications according to customer’s specification
• Understand and help to resolve application issues encountered in projects and by customer
• Work with team to fomulate work instructions
• Machine commisioning in factory/customer Site
• Ensure design meets project required milestone and timeline
• Provide training to customer
• Overseas travel is required with short notice period

Qualifications

• Candidate must process at least Bachelor Degree in Mechanical / Electrical / Mechatronic Engineering or equivalent OR-Fresh graduates with relevant knowledge in their course of study are welcome to apply.
• Knowledge in programming and / or experience in automation field are added advantage
• Preferably with 1-2 Year(s) of working experience in Industrial Automation, Semiconductor or any other related field/industry is required for this position.

Other Information

Skillset(s) Requirement:

• Required Knowledge: Power sizing, power distribution, motion control (advantage)
• Required Skill(s): AutoCAD, Solidworks, Motion control software (advantage)

Attributes:

• Strong communication and analytical skills, energetic and willing to work hard
• Ability to prioritize and multi-task in a fast-paced environment
• Responsible, Positive Attitude and able to work well as a team
• Possess good initiative and good critical thinking skill to solve issue at root cause level

Normal working hours + Standby support

Work Location: East

Skillsets Required (MUST):

F5 Load Balancer

AWS Load Balancer - Application Load Balancer (ALB) / Network Load Balancer (NLB)

Firewall

Palo Alto

Junior Network engineer with minimum 1 year exp is ok for the role with the avove skillsets. this is a level 1 role

• Independently conduct key operational activities, for example, Installation, commissioning, maintenance and troubleshooting of Edwards products to achieve >95% First time fix rate (FTFR), whilst ensuring high levels of customer satisfaction.
• Adherence to defined work processes, risk assessment and SOP is required to be strictly comply.
• Where required, select, accurately maintain, and appropriately use Edwards Product and Field Service Operational information. When required use Edwards processes, systems, and people network (inc Edwards Service management application system (SMA). When applicable use escalations (e.g., CMS), comms & reporting etc., to ensure a strong focus of customer satisfaction.
• Undertake Software setup, operation, maintenance and (basic) analytics. Conducts basic fault-finding and troubleshooting support to resolve or escalate issues within the agreed contractual timeframes and or Service level agreements (SLA’s) to meet customer expectations.
• Works alongside teammates - Demonstrates situational risk awareness for on the job SHE as well as providing strong support of teammates. Adheres to all relevant aspects of the risk control elements associated with all field service activities
• You will be expected to learn and develop your knowledge and skills as a Field service engineer. You will be expected to advance to more complexed product ranges after completion of applicable product training.
• Provides detailed and accurate feedback on field service activities and compiles clear and concise reports for submission to your line manager and/or technical support to enable informed decisions to be made to resolve product issues. Submit relevant SMA data after completion of activities to help support operational data collection.
• As part of your role, you will be expected to setup, operation and maintenance of software products and monitoring platforms on Edwards equipment.
• You will be expected to work with Edwards processes and operating platforms to accurately capture service-related information as determined by the scope of responsibility for creation of field service notifications and orders, through to the completion of work orders.
• Strong alignment with organisation expectations to deliver and achieve the targets.

Job Requirements

• Strong customer focus to ensure delivered solutions meet customer expectations and timeframes, whilst working in alignment with Edwards strategies and processes.
• Self-directed, with the ability to understand and resolve problems aligned with job responsibilities and escalates through the appropriate channels when required.
• Proactively seeks feedback and asks questions to understand business and improve decision making
• Collaborates and supports with team members to deliver company objectives
• Complies with all applicable laws, policies and standards to ensure organizational, safety and health obligations are met.
• Good written and verbal communication skills. Proficient in home country language, a basic command of written and spoken English is required.
• Able to use computer software to record data and write reports
• Can understand and interpret technical documentation relevant to work e.g. technical drawings
• Education level: Formal qualification in a mechanical, electromechanical or an electronics discipline.
• Minimum of 2 years working experiences in relevant or related industry or technical experience in an engineering, service or maintenance role, involving direct contact with external and internal customers.
• Fresh graduates can be consider based on merits.
• Previous field service experience in a relevant or related industry, ideally customer facing.
• Ability to manage and prioritize activities as directed by line manager.
• Logical approach on fault finding, adopting systematic problem solving methodology.
• Able to interact positively in a multi-cultural and multilingual environment.
• Team player, able to provide support among the team and/or required by the Line Manager.

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

C# Software Engineer - 2 years contract, renewable & convertible - Singapore

Our Client is looking for mid-level C# Software Engineer:

• At least 2 years in software development
• At least 2 years of in C# .Net Framework

Why Join Us?

• Career Growth: This role offers significant growth opportunities, allowing you to expand your skills and advance in a dynamic, innovative environment.
• Innovative Projects: Be at the core of impactful digital transformation, working with cutting-edge tools and technologies.

Responsibilities:

• Analyzing, designing, programming, testing, documenting and maintaining IT applications
• Performing Service Request submission and deployment support activities for the different environment. (SIT, UAT, PROD)
• Updating system documentation.
• Performing and managing stages of the SDLC and participate in the systems review with Project Lead/Manager.
• Developing applications for better productivity using development tools
• Designing and documenting system design, architecture and propose appropriate technologies and tools required to implement systems; and ensuring users sign-off on design specifications.

Requirements:

• Bachelor’s degree in Computer Science, Software Engineering, or related field.
• 2+ years of experience in C# .Net Framework
• Experience with WPF and ASP.Net
• Familiar with relational database concepts and SQL (MS SQL)
• Experience in Git and good knowledge in Git workflow
• Experience in productivity tools such as Jira and Confluence
• Experience working in an agile scrum environment
• Knowledge in Jenkins and Kubernetes is a plus

This is a 2 years contract to start, renewable and convertible to permanent.

EA License Number: 16S8131

Recruiter License Number: R22105628 (Yeo Zhi Qi Jeanette).

• To lead and oversee Supervision Team to ensure all works are carried out in accordance with the Contract and authorities’ requirements.
• Manage the Supervision Team to monitor, supervise and inspect works as directed by CAG, QP(S), QP(Geo) and/or the project consultants, including planning the roster shift duties based on the work schedules of the contractors and ensure the welfare of the personnel reporting to him are well taken care of. The shift roster shall comply with all relevant Acts and Regulations. In event of any Personnel not turning up for duty, he shall immediately arrange for a qualified and competent replacement.
• Work with the QP(D) / QP(S) / QP(Geo) to resolve all design and technical issues arising from the construction of Temporary Works and Permanent Works.
• Review contractors’ proposal, method statements, risk assessments and designs, including to assist QP(S) and QP(Geo) in reviewing the
• construction proposals and implement supervision oversight of these construction works carried out by the contractors.
• To provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site.
• To have overview of the quality system implementation, materials approval and compliance testing procedures. To assist the Superintending Officer as an S.O. Rep Assistant in aspects such as quality assurance-quality control and workmanship of constructed works, compliance with authority requirements, material and other testing procedures during construction, project progress monitoring and reporting, compliance with WSH safety and security regulations and requirements.
• To ensure the stipulated number of Personnel are on site throughout the duration of the Contract and ensure its adequacy by monitoring and proposing manpower deployment according to the inspection trend and contractor’s rolling programme.
• Manage interface points between packages of work, scope of work and that of other parties working on site.
• Identify potential problems during construction and work to mitigate these.
• Monitor project progress to ensure timely completion.
• To attend risk workshops or meetings (such as Design for Safety review meetings) and other meetings relating to the Project as directed by the Superintending Officer, including attending any safety and environmental meetings, promotions, risk assessments and campaigns.
• To attend site, progress, variation and coordination meetings with CAG and the contractors.
• Prepare necessary site progress and status report for update to CAG.
• To ensure CAG emergency preparedness protocols are adhered to by the contractors during trial runs or actual emergencies.
• Monitor and report to the Superintending Officer and Contractors on quality, workmanship, WSH safety, security, housekeeping and public relationship issues of main contractors, sub-contractors and direct contractors/ suppliers at site.
• Carry out any other duties related to the Project, including contract administrative tasks as directed by the CAG.

Qualification:

• Minimum eight (8) years of relevant experience as a civil & structural engineer, of which at least 6 years on projects similar in size and complexity; in particular deep excavation, foundation, cut and cover tunnel works and building works;
• Possess a Civil and Structural Engineering degree recognized by the Professional Engineers Board of Singapore;
• Accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore;
• The SRE shall be proficient in contract administration with Public Service Sector Conditions of Contract (PSSCOC);
• Demonstrate capability to manage the Supervision team to monitor, supervise and inspect works as directed by CAG, QP(S), QP(Geo) and/or the project consultants and FUI owners, including planning the roster shift duties based on the work schedules of the contractors and ensure the welfare of the personnel reporting to him are well taken care of. The shift roster shall comply with all relevant Acts and Regulations;
• Past project experience in leading supervision teams in projects of similar nature. He/she must demonstrate proven commitment to safety and health on site, possess excellent leadership qualities, organisational and inter-personal skills;

Responsibilities:

• Manage, maintain, and support network, desktop & server infrastructure which includes setting up and maintenance of servers, storage equipment and conducting backup and data recovery activities

• Provide Server administration support and Database support for MSSQL DB.

• Providing operational support for systems (virtual/physical servers).

• Responsible for patch management (rollout of server patches), & hardening

Requirements:

• Diploma in Computer Science/Information Technology or related qualifications

• At least 1 year of relevant working experience

• Hands on experience in VMWare, Storage, Windows 2008/2012/2016 Server

• Knowledge in Active Directory, DHCP, DNS, Group Policy

• Knowledge in troubleshooting skills

Licence no: 12C6060

• Must have experience in data center deployments, building large-scale infrastructure.
• Knowledge of network routing and switching concepts and protocols including BGP, TCP/IP, VLAN, ISIS, OSPF, and MPLS
• Comfortable accomplishing basic tasks from Linux/Unix command line interface
• Demonstrated ability to analyze complex situations and utilize troubleshooting skills, systems and tools, and creative problem-solving abilities under pressure.
• Experience with Service Provider network hardware platforms and architectures including routers/switches and data center switching platforms is preferred (Good to have)
• Experience with field-based work in data centers

Responsbilities:

• Provide highly visible customer support through the performance of on-site installation, as well as overseeing any necessary diagnoses, troubleshooting, service, and repair of complex equipment and systems
• Perform continual improvement programmes, parts overhaul, preventive maintenance, modifications and repair works on equipment
• Serve as company liaison with customers on administrative and technical matters for assigned projects
• Coordinate logistics arrangements with customers on equipment related matters.
• Responding to customers' complaints provides time to solutions to resolve customers' issues
• Monitor the performance of the product, provide regular update reports and feedback on customer's service requests
• Report common complaints of customers to management in order to address the situation for future reference.

Requirements:

• Degree/Diploma in Electrical/Electronic/Mechanical/Mechatronics Engineering or its equivalent
• Some relevant experience with semiconductor equipment knowledge
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment
• Required to work or on standby after office hours/weekend/public holiday.

EA Personnel Name: Jackie Ng
EA Personnel No: R22109024
EA License No: 95C5411

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.