• Reports to Construction Manager
• Review traffic layout plans
• Assess public feedback and develop traffic scheme design
• Laisse with consultants, contractors, advisors/grassroots leaders on external projects
• Prepare/plan Temporary traffic management scheme for temporary traffic diversion works
• Prepare reports on road conditions before and after traffic diversion.
• Ensure the activities comply with the quality, environment, health & safety requirements

Job requirements:

• Bachelor’s Degree in Civil engineering or equivalent
• Minimum of 3 years relevant experiences related to Traffic Engineering jobs
• Experience in LTA projects traffic management & traffic diversion works
• Technical expertise and knowledge in traffic/road diversion jobs
• Proficient in different stages of traffic diversion works
• Proficient in Microsoft Office and can use Auto CAD
• Attained CSCPM/BCSS certification
• Good interpersonal skills
• Hardworking and willing to learn
• Location : Woodlands
• Project : Viaducts

• Report to Precast yard Manager
• Responsible for All Precast segments casting work
• Responsible Precast Mould Assembly
• Profiling of Precast Segment Rebar and Post Tensioning Duct
• Preparation of Pre and Post Tensioning Calculation
• Ensure the quality of work as per the approved standard
• Assure that work is done according to safety work practices
• Post Tensioning Duct Layout and Profile works
• Coordinate with site Engineer and supervisor
• Assist with Senior Engineer and attend internal meetings

Job Requirements:

• Degree in Civil Engineering or equivalent
• At least 2 years of experience in civil engineering projects, inclusive of relevant experience in precast yard or fabrication yard
• Experienced in the fabrication of segmental box girder for viaduct, precast mould assembly & repair, and/or similar projects is preferred
• Knowledgeable on the applicable standards for the casting works
• Location :Woodlands
• Project : Viaducts

• Reports to the Construction Manager
• To ensure that day to day lifting operations are monitored at an appropriate level.
• Plan, organize, supervise and liaise closely with sub-contractors and operation teams on all ongoing lifting activities.
• Perform routine checks and inspections on site to ensure the compliance with authorities’ requirements.
• Address to concerned party regarding the safety of any lifting operations
• Provide reports to construction team regularly
• Liaise closely with HSE team to ensure operations comply with safety standards

Job Requirements:

• Degree in Civil Engineering or equivalent
• Minimum of 5 years’ experience in the construction field; inclusive of 3 years’ experience in construction and supervision for vehicular structures and road projects (LTA Road / MRT / Viaduct)
• Technically expert and highly knowledgeable in lifting of heavy structures
• Candidates with previous experiences in LTA Projects are preferred
• Attained IES/SHETC Appointed Person for Lifting Operation certification is mandatory for this position
• This position require to perform night lifting works when necessary
• Location : Woodlands
• Project : Viaduct

COMPANY DESCRIPTION

Care Corner Singapore Ltd was founded in 1981, in a climate of changes in the early 1980s, as economic competition in the region intensified and the rift between the wealthy and the lower-income in particular the Chinese blue-collar workers, widened. Rev Tan Tien Ser and a group of passionate individuals believed that these marginalised people with lower income and little opportunities for a formal education could be helped to realise their potential and become more competent and fulfilled persons. Through a series of early outreach initiatives, Care Corner has evolved into an organisation offering a wide range of programmes and services delivered through various social service centres located island-wide. In a bid to stay relevant to the needs of the community, Care Corner has continuously strived to offer new and innovative programmes to support those in need and the less privileged.

RESPONSIBILITIES

Job Purpose

Reporting to Head (People & Organisation Development, P&OD), you will be responsible for leading talent acquisition strategies and drive end-to-end recruitment activities in Care Corner. Working in partnership with all service points/departments, you will manage an efficient and robust hiring approach to secure a strong talent pipeline with the capability to achieve the organisation mission and goals. You will also oversee employer branding initiatives and related programs e.g internship programs and learning journeys, to attract and build talent pipelines. Support and work closely with P&OD colleagues and other departments to develop and enhance HR systems and processes, especially as they relate to talent acquisition and EVP.

Roles & Responsibilities

• Plan the overall talent acquisition strategies in line with organisation manpower needs and growth.
• Manage the end-to-end recruitment process, from job requirements, posting, sourcing, interviewing, offering and pre-boarding arrangement.
• Partner with communications team to proactively promote our Employee Value Proposition (EVP) and Employer Branding through various social media and career sites (both internal and external).
• Review and enhance recruitment-related policies and practices to ensure a seamless candidate experience and alignment to fair employment considerations framework.
• Monitor the usage of recruitment tools, systems and platforms that enables effectiveness and efficiency of the recruiting processes.
• Build and maintain a talent pipeline through networking, talent mapping, and relationship building with IHLs, industry professionals and partners.
• Proactively seek market intelligence to gain competitive advantage in attraction, assessment, and sourcing methodologies.
• Leverage data and analytics to make informed decisions, track recruitment key performance indicators (KPIs), generate reports and insights to identify areas for improvement and optimise recruitment efforts.
• Lead or participate in transformation programmes that serve to achieve HR service and operational excellence. Such projects may include HRIS improvements, career progression pathways/mapping, job description library, etc.
• Support the development of processes and guidelines to onboard new hires and to facilitate their assimilation into the organisation to become effective contributors.
• As a secondary portfolio, assume ad-hoc HR operational responsibilities as delegated by Head (P&OD), such as staff engagement and staff welfare activities.

Requirements

• Bachelor degree, preferably in business or human resources.
• Minimum of 3 years' progressive talent acquisition/recruitment leadership experience within an in-house or recruitment process outsourcing (RPO) environment for managerial position.
• Knowledge of full-cycle recruiting, employer branding techniques and selection methods (e.g competency-based interviews, reference checks, psychological test etc.) and employment legislation and regulations
• Industry knowledge of social service sector will be beneficial.
• Demonstrated ability to lead change initiatives and innovation in HR practices, preferably in a large and complex organisation
• Able to communicate and influence effectively and build collaborative relationships.
• Possess tenacity, resilience and patience to deal with ambiguity and change and flexibility to support HR projects and tasks.
• Uphold integrity and sensitivity of confidential information as a trusted advisor.

Bachelor degree, preferably in business or human resources.

Thank you for your application. We regret that only shortlisted candidates will be notified.

How Will You Make an Impact at Thermo Fisher Scientific?

Joining Thermo Fisher Scientific means being part of a team dedicated to significant work. You'll find opportunities for growth and learning in a culture that fosters development. Our inclusive, global environment celebrates diverse talent, backgrounds, and experiences, contributing to our goals of speed, efficiency, innovation, and growth.

Our extensive product and service range, from cutting-edge instruments to essential lab supplies and life-saving medicine, is trusted by customers worldwide. Thermo Fisher Scientific offers you a chance to be part of a world-class team, working in manufacturing to create products that make the world healthier, cleaner, and safer.

Continual growth and learning await you here, backed by our $40+ billion revenue and industry-leading R&D investment. Be part of a team that makes substantial contributions to the world.

Your Role:

We are seeking a highly skilled and experienced Manufacturing Process Engineer II to join our team, with a specialization in MES Camstar. This role is crucial for driving process improvements, lean transformation, and simplifying manufacturing processes through effective integration and optimization of MES Camstar. The ideal candidate will be adept at utilizing lean manufacturing principles to enhance efficiency, reduce waste, and contribute to the overall productivity of our manufacturing operations.

Key Responsibilities:

• MES Camstar Implementation and Optimization:
• Serve as the primary engineer for the implementation, configuration, and optimization of MES Camstar solutions.
• Ensure MES Camstar integration aligns with manufacturing processes to enhance operational efficiency and data accuracy.
• Conduct regular system audits and updates to maintain optimal performance of MES applications.
• Lead lean manufacturing initiatives to streamline workflows, reduce waste, and improve process efficiency.
• Apply continuous improvement methodologies, such as Kaizen, Six Sigma, or 5S, to drive process enhancements.
• Collaborate with cross-functional teams to identify bottlenecks and implement effective solutions.
• Analyze current manufacturing processes to identify complexities and redundancies. Propose and implement strategies to simplify these processes.
• Facilitate the integration of new technologies or process changes, ensuring minimal disruption to production.
• Develop and maintain detailed process documentation to support training and process standardization.
• Work closely with IT, production, quality, and maintenance departments to ensure seamless integration of MES Camstar with existing processes.
• Provide training and support to end-users, ensuring they are proficient in using the system and understanding the processes.
• Communicate effectively with all levels of the organization to report progress, results, and future plans.

Education:

• Bachelor's degree in Engineering (Industrial, Mechanical, Electrical, or related field).

Qualifications:

• Minimum of 3 years of experience in a manufacturing process engineering role, with a strong focus on MES, preferably Camstar.
• Proven track record of implementing lean manufacturing principles and achieving tangible improvements.
• Solid understanding of manufacturing processes and systems integration.
• Excellent problem-solving skills and the ability to manage complex projects.
• Strong communication and interpersonal skills, with the ability to work effectively in a team environment.

Responsibilities:

• Communicate and coordinate with suppliers, customers, and internal department, to meet objective and requirements, plan, monitor and control the project, including carrying out implementation of the project
• Responsible for conceptual and detailed design for standard and customized build automation/equipment such as material handling, process automation,fixturing, and tooling.
• Hands-on prototype assembly, testing, and qualification inclusive of troubleshooting.
• Prepare cost estimation, budget, control report and other technical documentations when required
• Hands-on and assist in the factory manufacturing, installation, buyoff, supporting of projects internally and at customer sites, and other technical activities when required
• Assist in monitoring of projects, prepare reports on project progress and ensure project schedule is being met
• Prepare design, details and assembly drawings by using Solid Work, Auto CAD or equivalent software
• Resolve and escalate cross-functional technical issues for projects

Requirements:

• Diploma/Bachelor's degree in Control and Automation / Mechatronics / Computer Science / Electrical Engineering or relevant field
• Minimum 2-3years experience in handling and designing automation machine
• Ability to identify problems and resolve them in a timely manner
• Knowledge of ISO 9001, ISO 17025 and BizSafe

Location: Woodlands

Mon to Fri 8.30am to 5.30pm

Industry: Semicon Manufacturing

Salary: $3000-$4500

Job Description

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Issue and closure of CAR for customer (RMA) and Supplier issue – External
• RMA receipt and disposition of RMA in Macola – External.
• Work with QA department and Engineering on customer related issues e.g. RMA

Requirements:

• Degree / Diploma in Engineering (Electrical Engineering, Mechanical Engineering, etc).
• Knowledge of CMM, profile projector, and measuring equipments.

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Roles & Responsibilities:

• Assist Project Manager in planning, execution and completion of ACMV Project.

• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively.

• Supervise and liaise with relevant authorities / subcontractors / workers at site and ensure work performed on-site complies with local authorities’ requirements.

• Analyze, manage and track project costs against budget.

• Any other tasks assigned by the management.

Job requirements:

• Degree/Diploma in Mechanical Engineering or its equivalent

• Work experience in ACMV or Mechanical Engineering in the construction industry.

• Good technical knowledge of ACMV system for Commercial Project.

• Good communication, interpersonal and problem-solving skills

• Possess Class 3 license.

*Salary is commensurate to working experience.

Please indicate the below information in your resume:

o Current & expected salary

o Reason(s) for Leaving

o Availability to commence work

We regret that only shortlisted candidates will be contacted.

Located at Woodlands

Mon to Fri 8.30am to 5.30pm

Salary: $4000-$4800

US MNC

Have AWS & bonus

Responsibilities:

• Reviewing production schedules, processes, specifications, and related information.
• Designing production processes that maximize efficiency and reduce waste.
• Preparing material and equipment lists, purchase orders, cost analyses, and estimated
  production costs.
• Designing the layout of facilities and determining personnel tools requirements.
• Work with NPI Team to improve the Work Instructions (WI) and update WI.
• Work with NPI Team to perfect the BOM and update BOM.
• Managing process documentation and preparing production reports.
• Enforce Safety Procedures and practices at all times in compliance to company safety
  policies and regulatory standards.

Requirements:

• Possess Degree in Mechanical Engineering or related discipline.
• Possess 3 years relevant experience in contract manufacturing environment.
• Experience in medical devices, cleanroom, GMP environment is a plus.

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Full job description

Job Responsibilities

• Plan and monitor project progress to ensure timely delivery
• Liaise with contractors, consultant, design team, client etc
• Manage project resources availability to meet project needs e.g manpower, build components, equipment
• Monitor and control project cost
• Conduct risk assessment for projects
• Arrange O&M work as required

Job Requirements

• Good knowledge of solar power system design
• Good communication and interpersonal skills which is essential for project work
• Self- motivated, hardworking, enthusiastic
• Willing to put in overtime when necessary to meet project datelines
• Experience in solar PV installation
• Diploma/Degree in Solar/ Renewable/Electrical engineering or related field
• Proficient in PVSyst/CAD/MS Office (Project/Word), PowerPoint, etc
• Familiar with fieldbus and other industrial communication protocol including Modbus, TCP/IP etc

We are seeking a highly organized and motivated Mechanical Project Engineer to join our dynamic team. He/She will be responsible for planning, executing, and closing out engineering projects. The ideal candidate will have strong project management skills, technical expertise, and the ability to collaborate effectively with cross-functional teams.

Responsibilities:

1. Project Planning: Develop comprehensive project plans, including scope, timelines, budget, and resource requirements. Ensure alignment with organizational goals and client expectations.
2. Coordination: Collaborate with various stakeholders, including internal teams, clients, suppliers, and contractors, to ensure effective project execution. Maintain open communication channels and manage expectations.
3. Risk Management: Identify potential risks and develop mitigation strategies. Proactively address issues to ensure projects are delivered on time and within budget.
4. Budget Management: Monitor project budgets and expenditures, ensuring financial goals are met. Identify cost-saving opportunities without compromising project quality.
5. Quality Assurance: Implement quality control measures to ensure that project deliverables meet established standards and client requirements. Conduct regular inspections and testing as needed.
6. Technical Oversight: Provide technical expertise and guidance throughout the project lifecycle. Collaborate with engineers and technical staff to resolve complex issues and ensure project success.
7. Reporting: Generate regular progress reports for internal and external stakeholders. Communicate project status, milestones, and challenges effectively.
8. Documentation: Maintain accurate and up-to-date project documentation, including design documents, drawings, and change orders. Ensure compliance with industry regulations and company standards.
9. Client Relations: Build and maintain positive relationships with clients. Address client inquiries and concerns promptly, ensuring high levels of customer satisfaction.

Qualifications:

1. Bachelor's degree in Mechanical Engineering or a related field
2. Proven experience as a Project Engineer or in a similar project management role.
3. Experience in Cleanroom
4. Strong knowledge of project management principles, techniques, and tools.
5. Excellent communication and interpersonal skills.
6. Proficiency in project management software (e.g., Microsoft Project).
7. Ability to manage multiple projects concurrently.
8. Problem-solving and decision-making skills.

Skills:

1. Project Management
2. Risk Assessment and Mitigation
3. Budgeting and Financial Management
4. Technical Expertise
5. Communication and Presentation
6. Quality Control
7. Client Relationship Management
8. Team Collaboration

Requirement

Degree holder in Electrical Engineering.

Experience in electrical switchboard line - 1 to 3 years in same or similar role.

Familiar In control panel design.

Ability to understand control philosophy.

Job Description

Design electrical control system & prepare electrical General Arrangement, SLD & Schematic drawing using Autocab.

Source and select components in accordance to technical specification requirement.

Good understanding on functionality of electrical components, physical failure and measurement techniques.

Able to work in a diverse team, self-reliant & excellent decision making skills.

Provide technical support on site. (If required)

Interested parties may email your resume, contact & expected salary to [email protected]

We are in the lookout for a Business Development Executive to be part of our team. You will be given the opportunity to develop your skills within the overall sales process when it comes to this role.

Aside from the base salary, this role offers a competitive multi-commission scheme as we believe in rewarding our people and recognizing their achievements.

Job Function

• Assist in the preparation, presentation, negotiation, following up of business proposals.
• Establish good rapport with customers and assist in identifying business opportunities.
• Develop sales strategies to penetrate the market for products and services
• Presentation of business proposals and models to potential customers.
• Develop product/service introduction plans and processes.

Job Requirements

• Minimum Professional Certificate, Diploma or BSc in Marketing or any other tertiary discipline
• Fresh Graduates are welcome to apply
• Self-motivated and disciplined to achieve sales targets
• Able to converse well in English and other language (Chinese) is an advantage.
• Good interpersonal and communication skills
• Pleasant personality with ability to interact with people at all levels
• Proficient in Office application skill(s).
• Possess own transportation as travelling is involved

Why Join Us

• We thrive in being dedicated to culture of EXCELLENCE
• PASSIONATE in what we do
• Growing to strong as a TEAM through collaboration

We apologize that only shortlisted candidates will be notified.

1. Performed on site (Cleanroom) repairing, installation and maintenance of automation equipment and machinery which include mechanical, electrical, etc

2. Work with customers to diagnose technical problem, determine the solution and assist customer in implementing the fix.

3. To liaise with customers on unresolved technical problems, and ensure proper record are maintained

4. Perform stand-by duty

Full job description

Job Responsibilities :

• Solar and Electrical background required
• Identifying new opportunities
• Building and expanding the company's presence
• Leading sales and client - relationship management
• Tracking new markets and trends
• Recommending new products and services
• Proposing and developing new strategic partnerships
• Writing proposals and plans
• Guiding long term objectives to meet business needs

Job Requirements :

• Good knowledge of solar power system design
• Good communication and interpersonal skills which is essential for project work
• Self- motivated, hardworking, enthusiastic
• Willing to put in overtime when necessary to meet project datelines
• Experience in solar PV installation
• Diploma/Degree in Solar/Renewable/Electrical engineering or related field
• Proficient in PVSyst/CAD/MS Office (Project/Word), PowerPoint, etc
• Familiar with fieldbus and other industrial communication protocol including Modbus, TCP/IP etc.

 

Responsibilities

• Work with internal and external stake holders for smooth production transfer to mass production.
• Establish effective communication system or process in view of dynamic changing priority for production readiness.
• Responsible in buying off new machines and maintaining internal inventory and monitoring system.
• Collaborate closely with machine suppliers to drive process improvement.
• Identify and recognize machine shortfall via existing and constant usage.

Requirements

• Diploma / Degree in Electrical / Mechanical Engineering or related field.
• Minimum of 1 year work experience preferred
• Able to work individually and as a team.
• Good communication and interpersonal skills.
• Excellent project management, analytical and problem-solving skills.
• Proficient in Microsoft office.

Responsibilities

• Responsible for the daily hardware maintenance of sockets, nests, pins etc.
• Support incoming and outgoing hardware check, and production hardware release/obsolete.
• Liaise with internal and external parties to effectively manage released hardware.
• Responsible for effective hardware and Probe Card maintenance and repair.
• Support daily operational needs such as tracking of consumables inventory and re-ordering.

Requirements

• Diploma in Electrical / Mechanical Engineering.
• Relevant experience in Hardware Maintenance especially load boards, sockets, change kits and probe cards.
• Proficient in Microsoft Office.
• Good communication skills and team player.
• Good planning and organization ability.

Responsibilities

• Responsible for implementing the defined ESD protective measures and conducting ESD Quarterly Audit.
• Ensure that all non-conformances found during the audit have been rectified and closed prior to publishing the audit report in the ESD Control System.
• Develop ESD training materials and train personnel in ESD programs and procedures.
• Perform product qualification activities for new items / materials to be used inside the production floor.

Requirements

• Diploma / Higher NITEC / NITEC in Electronic / Electrical / Mechanical / Mechatronics Engineering or equivalent.
• Preferably with minimum 1 year relevant experience in semiconductor industry
• Knowledge in auditing and ANSI/ESD S20.20 is an advantage
• Proficient in Microsoft Word, PowerPoint & Excel
• Good communication skills, planning and organizing ability

Responsibilities

• Responsible for daily operational equipment issues and strategize recovery actions to support production requirement.
• Perform equipment buy-off and qualification for machine installation, modification, upgrade and maintenance.
• Involve in WLCSP process (Taping & Detaping, Wafer Mount, Backgrinding, Laser Grooving, Laser Mark, Dicing, AOI, Die Sort etc)
• Monitor and analyse equipment performance and reliability.

Requirements

• Diploma / Higher NITEC / NITEC in Electronic / Electrical / Mechanical / Mechatronics Engineering or equivalent.
• Tape and Reel experience in wafer level and knowledge on vision system is preferred.
• Possess strong analysis and good teamwork.
• Good communication and interpersonal skills.
• Able to commit to either 12-hr permanent day / night shift.

**Job Description:**

We are seeking a talented Mechanical Engineer with a passion for automotive technology to join our team. As a key member of our engineering department, you will be responsible for conducting detailed reports, performing scanning operations, and contributing to the development of our scanning technology.

**Responsibilities:**

- Conduct detailed reports on scanning results and findings, providing comprehensive analysis and recommendations.

- Perform scanning operations using advanced automotive scanning equipment and software.

- Collaborate with cross-functional teams to optimize scanning processes and enhance product performance.

- Maintain accurate documentation of scanning procedures and results for future reference.

- Assist in the development and testing of new scanning technologies and solutions.

- Stay up-to-date with industry trends and advancements in automotive scanning technology.

**Requirements:**

- Bachelor's degree in Mechanical Engineering or related field.

- Proven experience in report writing and technical documentation.

- Proficiency in using automotive scanning equipment and software.

- Strong analytical and problem-solving skills.

- Excellent communication and collaboration abilities.

- Ability to work independently and as part of a team in a fast-paced environment.

**

- Opportunities for professional development and career growth.

- Dynamic and collaborative work environment with a focus on innovation.

Responsibilities

• Responsible for troubleshooting, calibration, repair and maintenance of assigned Testers and Handlers / Probers platform.
• Ensure equipment are in production condition with minimum downtime and running at yield specified.
• Responsible for tracking, monitoring and reporting daily equipment downtime.
• Responsible for daily house keeping and any other responsibilities as assigned.

Requirements

• Diploma / Higher NITEC / NITEC in Electronic / Electrical / Mechanical/ Mechatronics Engineering or equivalent.
• Specialized knowledge of equipment, testers, handlers, probers, etc is preferred.
• Possess Trouble shooting skills on equipment maintenance and repair.
• Possess strong analysis and good teamwork.
• Good communication and presentation skills.
• Able to commit to either 12-hr permanent day / night shift.

Responsibilities

• Be responsible for direct sales to professionals and corporate customers.
• Identify, build and manage sales pipeline and business relationships.
• Drive the entire sales cycle – from leads generation, initial customer engagement, qualifying, consultation to closure.
• Participate in prospecting activities to build a strong pipeline for the company.
• Consult with prospects and pursue sales opportunities to close the deals effectively.
• Engage professionals to advance opportunities by sharing on the benefits of our curriculum and understanding their learning aspirations.

Requirements

• Diploma / Degree or equivalent practical experience.
• At least 2 years of experience in sales or client engagement.
• Hunter mentality and a “no fear” approach to prospecting clients.
• Ability to communicate efficiently and possess strong presentation skills.
• A strong work ethic, positive attitude and genuine desire to learn.
• Highly disciplined and good time management.
• Able to converse in Mandarin in order to liaise and communicate effectively with Mandarin speaking clients

We are seeking a meticulous and detail-oriented Quality Control Engineer with a focus on chemical engineering to join our team. The ideal candidate will be responsible for ensuring the quality and integrity of industrial paintings through rigorous quality control processes. As a Quality Control Engineer, you will collaborate closely with chemical engineers to implement and maintain quality standards throughout the production process.

Key Responsibilities:

• Quality Assurance: Develop and implement quality control procedures specific to industrial paintings. Conduct thorough inspections of materials, processes, and finished products to ensure compliance with industry standards and specifications. Identify areas for improvement in quality control processes and recommend solutions to enhance overall product quality.

• Chemical Analysis: Utilize chemical engineering principles to analyze raw materials and finished products for quality assessment. Perform chemical tests and experiments to evaluate the performance and durability of industrial coatings. Interpret chemical analysis data and provide insights to optimize product formulations and processes.

• Collaboration: Work closely with chemical engineers and other cross-functional teams to troubleshoot quality issues and implement corrective actions. Communicate effectively with production staff to ensure adherence to quality standards and procedures. Collaborate with suppliers and external partners to maintain quality control throughout the supply chain.

• Documentation and Reporting: Maintain accurate records of quality control activities, including test results, inspections, and corrective actions. Prepare comprehensive reports detailing quality metrics, trends, and improvement initiatives. Present findings and recommendations to management and stakeholders as needed.

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

Responsibilities

• Generating leads and cold calling to get appointments with potential clients
• Attending face to face client meeting to understand business needs and consultatively pitch our solutions
• Consult with prospect about business challenges and requirements with analysis of costs and benefits.
• Build and enhance relationship with clients to grow portfolio.
• Report on sales activity on a weekly basis
• Other general admin duties as assigned

Requirements

• Hunter mentality and a “no fear” approach to prospecting corporate clients
• A strong work ethic, positive attitude and genuine desire to learn
• Candidates with no experience are welcome to apply as training will be provided
• Candidates with prior experience in related fields can be considered for senior position