1. Packing of finished product into paper bags weighing 20kg to 25kg
2. Stacking of finished product packed in paper bags onto wooden pallets
3. General housekeeping of work area
4. Ad hoc duties as assisgned by supervisor
5. Candidate will be trained to run production of chemial processes when more experienced
6. Protective gear must be worn during work (E.g. safety helmet, mask, ear plugs, gloves, safety boots)

Domain: Electronics (not mandatory)

Location: North, Singapore

Resource needs to assist Director/Manager in preparing MS Excel presentations, to do interactions with different departments

* Experience in Advanced Excel tool

* Good experience in reports preparation and presentation to seniors

* Good to have PowerBI, Tableau User Level experience

* Good communication skills

* Need to report to Senior Manager/Director

• Operate and monitor the chemical production activities in the plant and ensuring that the product is manufactured within set production schedule and to the required standards of quality and cost effective manner.
• Troubleshoot and resolves technical problem when necessary.
• Operate valves and pumps to admit or drain specified amounts of materials, impurities, or treating agents to or from equipment
• Flush or clean equipment, using steam hose or mechanical reamer
• Draw samples of product and sends to laboratory for analysis
• Perform general clean up and maintain good housekeeping in order to keep working areas clean, organized, and safe
• Patrol and inspect equipment or unit to detect leaks and malfunctions
• Weigh or measure specified amounts of materials
• Read, comprehend, and follow written and oral instructions, safety rules, operating procedures and product recipes
• Load and unload tank trucks and drums containing hazardous and non-hazardous materials
• Perform incidental maintenance as required to troubleshoot processes and to keep processes running properly
• Lock out processing equipment to make sure maintenance can safely repair processing equipment
• Be an active Emergency Response Team member

Responsibilities

• Review engineering deliverables from detailed engineering consultant / equipment vendors to ensure to meet client specifications
• Coordination with detailed engineering consultant or design, client, vendors, sub-contractors and third party specialists
• Monitoring, reporting ad driving engineering process
• Conducting and attend P&ID design review, HAZOP (Hazard and operability study), SIL (Safety integrity level) and 3D model reviews.
• Monitor and drive the closing out of punch lists after design review / HAZOP (Hazard and operability study).
• Supporting procurement team on technical issue with vendors, Construction team during construction phase on site checks and commission team during plant or sub system start-up.
• Function assigned by Department managers.

Requirements

• Bachelor Degree in Chemical engineering or related disciplines
• Experience in Marine/Oil & Gas will be an added advantage
• Knowledge in HYSYS, SmartPlant P&ID
• Able to handle work under tight schedule
• Good sense of Contractual Knowledge

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

(All Yards)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

• Lead the process and mechanical team for process plant EPC project, including design, engineering, supporting procurement & installation, and testing & commissioning works
• Review tender specifications and meticulously evaluate vendor proposals for process mechanical equipment, propose suitable equipment brands for tender submission and procurement, prepare cost estimations for process mechanical work during the tender stage.
• Provide support during the procurement, contract negotiation, and progress claim processes throughout project execution.
• Lead testing and commissioning activities, ensuring the seamless transition to operational status.
• Plan and manage the process mechanical work schedule, and keep the Management Team informed of project progress, emerging issues, and resource requirements.
• Deliver technical presentations to clients and consultants, responding to their inquiries and comments in a professional manner.
• Manage the process mechanical suppliers and subcontractors according to establish schedule and quality requirement.

Requirements

• Minimum bachelor degree in Chemical/Environmental/Mechanical Engineering or Equivalent.
• Minimum 8 years’ proven experience in process/mechanical design of process plant (incineration plant, water/wastewater plant, etc.), at least 2 years’ experience in leadership or team lead role. Experience in the Flue Gas Desulphurization (FGD) wastewater treatment system is an advantage.
• In-depth knowledge of relevant industry standards and Singapore codes of practice.
• Exceptional problem-solving and troubleshooting skills, with a track record of resolving complex technical issues.
• Proficiency in using commonly used software applications such as MS Office.
• Familiarity with Naviswork and Bentley View Software for P&ID is considered an added advantage.
• Strong leadership abilities, including the capability to lead a team effectively.
• Excellent interpersonal and communication skills to facilitate technical discussions and collaborate effectively with individuals at all levels within the organization.

Purpose of the Job :

• Plan and direct all aspects of engineering activities

• Drive team for continuous improvement in cost, yield and quality

• Responsible for setting up department KPIs

Job

• Understand customer requirements and meet/exceed customer goals

• Drive team to set up stable manufacturing processes with CpK >1.67

• Drive engineering discipline (use DOEs and Statistical Process Engineering tools) in cost, yield and quality improvement

• Arrange training for Process Managers and Engineers.

• Deploy FDC and SPC on key equipment

• Partnership with cross functional teams to meet production schedules, quality and safety

• Customer engineering and issues resolution

Requirement:

• Degree in Electrical/Electronics/Mechanical/Chemical Engineering/Chemistry or its equivalent with minimum of 15 years engineering experience in wafer fab or wafer bumping house, with at least 5 years management experience as a Director/Deputy Director level in a fast moving environment

• Thorough knowledge of wafer level packaging, engineering and production

• Have experience in setting up FDC and SPC

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Please email your resume in a detailed MS Word format to [email protected] stating

Expecting Salary

Date Available

Reason to Leave each job:

We regret that only shortlisted candidates will be notified

Joyce Koh Ai Leng

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building, Singapore 049705

Tel: 6950 9737

www.peopleprofilers.com

EA License Number: 02C4944

EA Personnel Reg nos R1110618

Job ID: L95W6R86

Summary

BPS Associate Accountant fulfils an integral transactional and reporting function in Deloitte’s Business Process Solutions (“BPS”). This role touches all aspects of finance function including GST compliance, documentation of process improvements and other special projects as needed. This position will report to the BPS Senior / BPS Manager.

Job Purpose:

Provide support on recording accounting transactions, and generating timely financial reports including the GST reporting process. Prepare online bank payments and provide cash flow projections to our clients by coordinating with relevant contacts and maintaining and reconciling general ledger accounts. Provide support to the BPS Manager, the other members of the BPS accounting team and the client.

Responsibilities may include:

• Obtain and file accounting related documents on a timely manner and highlight any improvements to the data collection process as necessary

• Key in data in the accounting system and maintain the general ledger accounts for clients

• Preparing monthly accruals, prepayment and other manual journal entries and reconciling accounts monthly

• Accounts receivable – assisting with daily/weekly/monthly invoicing

• Payment processing and monitoring payables

• Be Seconded to client offices to assist in assisting the accounting process, when necessary

• Compile and provide financial or transactional information or data as necessary.

Knowledge, Skills and Abilities Required

• Bachelor’s degree in accounting or a comparable professional qualification with 1 year or more experience in a similar accounting related role

• Self-starter, organized, attention to detail, deadline oriented, hands-on.

• Ability to work in a fast-paced team environment on several projects.

• Some experience with ERP systems in the past – Xero/ MS Navision / SAP is a plus.

• Must have excellent work habits, including a willingness to work the hours necessary to get the job done, especially when important deadlines cause greater than normal pressures.

• Knowledge of finance, accounting and cost control principles including Generally Accepted Accounting Principles.

• MS Office experience required including extensive Excel knowledge.

• Excellent verbal and written communication skills.

Summary

Senior Accountant fulfils an integral transactional and reporting function in Deloitte’s Business Process Solutions (“BPS”) team. This role encompasses all aspects of accounting from Accounts Receivable, Accounts Payable, Inventory recording, Cash Management, Fixed assets, Monthly Account Reconciliations, Credit Analysis, Payroll and other special projects as needed. This position will report to the BPS Manager / Partner.

Job Purpose:

Provide support for the daily, weekly and monthly accounting functions. Provide financial reports to our clients by maintaining and reconciling general ledger accounts. Provide support to the BPS Manager, other members of the BPS accounting team and allocated clients.

Responsibilities may include:

· Maintain the general ledger accounts by monitoring journal entries, preparing monthly accruals, prepayments and other manual entries and reconciling accounts on a monthly basis

· Year-end statutory financial statements preparation

· Accounts receivable – assist with the invoicing process and monitor collections

· Payment processing – setting up online bank payments and seeking approvals

· Assist with outsourcing or technology related special projects giving insightful analysis when needed.

· Assist in the year-end consolidation process of clients

· Assist in the provision of information and transactions as necessary and liaise with auditors and tax agents.

· Reconcile financial discrepancies by collecting and analyzing account information.

Knowledge, Skills and Abilities Required

· Bachelor’s degree in accounting or professional qualification with 2 years or more experience in a similar accounting role

· Self-starter, organized, attention to detail, deadline oriented, hands-on.

· Ability to lead a team of junior professionals in a fast-paced team environment on several projects.

· Experience with ERP systems such as SAP, MS Navision, Xero and other accounting systems.

· Must have excellent work habits, including a willingness to work the hours necessary to get the job done, especially when important deadlines cause greater than normal pressures.

· Knowledge of finance, accounting and cost control principles including Generally Accepted Accounting Principles.

· MS Office experience required including extensive Excel knowledge.

· Excellent verbal and written communication skills.

JOB HIGHLIGHTS

· Cutting Edge Internet-of-Things and AI Technologies

· Open Source and Maker Culture

· Friendly Working Environment

JOB DESCRIPTION

· Realtek is one of the leading fabless semiconductor design companies in the world, with this position, you will get to play a role in value-add to the latest Realtek wireless communication IC product line.

· You will develop software and firmware for the state-of-the-art Internet-of-Things microcontrollers, writing tools, automation, and build systems.

· You will also work closely with the hardware, driver, test, and marketing team to be exposed to the entire product designing cycle.

· You will have the chance to prototype your ideas and make them public through social media, workshops, and events.

· You will be able to follow the latest tech trend and learn new skills when working with cutting-edge technologies.

ROLES & RESPONSIBILITIES

· Be a part of a team that maintains, implements, and validates embedded software for Realtek's latest IoT SoCs

· Design application-level middleware to simplify the customer development process

· Port new features, capabilities, and platforms to Realtek IoT SoCs

· Prototype innovative IoT applications using various network protocols, tools, and open source software

· Debug and fix peripheral, wireless connectivity(Bluetooth, Wi-Fi, etc.), and network-level issues

· Collaborate with third parties for hardware and software projects (ARM, SeeedStudio, Sparkfun, Adafruit, AI-Thinker...)

· Online & offline event organization with groups, institutes, and local universities

· Content creation and social media marketing strategy based on Realtek IoT solutions

· Community management and customer support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electrical Engineering, or other related majors

· Fresh graduates are welcome to apply

· Experience with C/C++ and a scripting language(Python/Bash/etc.) is a must

· Experience with embedded system drivers, peripherals, computer networks, wireless connectivities, and open source development platforms (Arduino, PlatformIO, etc.)

· Experience with TinyML and/or AIoT-related development is a bonus

· Experience with video editing and content creation

· Willingness to learn new technologies and ability to follow the latest software and electronics trend

· Good Communication and Teamwork Skills

Tyco Electronics Singapore Pte Ltd (TE Connectivity) is looking for a Staff Software Engineer to join our Corporate R&D Center. The Software Engineer will be part of a newly formed Artificial Intelligence team to create an AI Hub for TE in Singapore. Team members will collaborate with R&D peers, business unit partners as well as local university and government research centers to undertake projects that will embed AI in TE’s design and process development work flows to deliver a competitive advantage to TE’s technologies. This position is based at our Singapore HQ.

The Singapore Corporate R&D Center is chartered to work with the CTO’s and Advanced Development Groups of TE Business Units to identify technical areas of interest for R&D and develop forward looking technologies that will deliver broad value to the business. In order to improve the New Product Development process, TE is expanding our Artificial Intelligence capabilities as a part of our Digitalization strategy to improve efficiency, decrease cost, and decrease time to market.

Job Responsibilities:

• Lead multiple projects in developing data science solutions to support new product development in TE
• Adopt cutting-edge data science techniques (using in-house coding tools or commercial software) to solve engineering problems (such as product design, manufacturing process, operations, material formulation, etc.)
• Assist in developing high-performance AI/ML infrastructure (local/cloud-based software) to deploy AI hub projects.
• Develop multiple algorithms powered by machine learning to work on experimental and simulation data sets
• Create awareness across TE of the AI modelling capabilities of the Singapore Corporate R&D Center
• Work in a multi-disciplinary environment with specialists in data science, electronics, material science, mechanics, additive manufacturing and other fields
• Work with local and global TE sites, external customers, and vendors to address tactical or strategic needs
• Partner with Singapore research institutes to develop advanced AI techniques and assist with validation and knowledge transfer of outsourced projects

Job Requirements:

Required:

• Master’s Degree in Computer Science Engineering (or related) with 8-12 years (or Bachelor degree with 10-15 years, or PhD degree) plus relevant working/research experience
• Keen interest in R&D involving coding and data
• Deep understanding of back-end development, data science and machine learning;
• Familiar with machine learning algorithms involving multiple data types
• Strong programming skill in Python, HTML, JavaScript, SQL, Bash or similar languages
• Understanding of the following: data processing techniques, high performance computing, cloud computing (like AWS), deployment and maintenance, web services, object-oriented programming (OOP), etc.
• Knowledge of front-end development and database management
• Knowledge of Linux operating system (Ubuntu, CentOS, etc.)
• Experience with version control Gitlab/GitHub or similar platform
• Experience in effective project management strategies and tactics

Preferred:

• Familiarity with TE products, such as connectors, cables, sensors etc.
• Broad knowledge of different materials’ mechanical, electric, thermal properties, including polymers, metals and alloys
• Broad knowledge of manufacturing processes (molding, extrusion, plating, stamping, assembly etc.), material development and product design
• Experience of programming for mechatronics and robotics

Context:

• Participate in product development of data quality monitoring and management. The product implements quality control and monitors trade messages between various systems with custom routing rules and message transformation with extensive use of message queues and middleware technologies.
• The Software Engineer should be an experienced cloud practitioner and have the mindset to keep improving the software development process and use DevOps tools with a focus on security, quality & performance.

Job Description:

• Study, evaluate, understand, and provide feedback on functional specifications
• Develop solutions following defined standards and high-quality
• Provide detailed estimation for the development of solutions
• Implement solutions using TDD
• Implement BDD for the features
• Perform non-functional testing
• Perform design and code review for other team members
• Prepare documentation for design and implementation
• Enable and support functional and user acceptance testing
• Support applications in production - analyze and resolve issues as they arise
• Work with various technical/functional teams to ensure proper delivery
• Maintain lessons learned, release post-mortem outcomes, and convert them into best practices
• Automation approach or suggest automation as and when applicable
• Be at the forefront of communications and have a good relationship with any stakeholder involved

Job Requirements:

• At least Bachelor’s Degree in Computer Science, Information Technology, Programming & Systems Analysis, Science (Computer Studies) or related fields
• Minimum 6 years in Java/J2EE development

Must Have Technical Skills and Experience

• Solution design using proven patterns, awareness of anti-patterns, performance tuning
• Java/J2EE, Spring, Angular JS, Spring MVC/Struts, Multi-threading, Restful web services, Swagger, JMS/WebSphere MQ, Javascript, JQuery, XML, XSLT, XPath, XSD
• Docker/Kubernete, Kafka, Spark, Mongo DB
• A strong understanding of recent Java language features, such as lambdas, streams, and futures
• Relational databases – MSSQL, Oracle, PostgreSQL
• Source management – SVN/GIT, TDD using Junit, DBUnit, Jira / QC
• Application server – Jboss / WildFly / Websphere
• Well experienced and have a good understanding of SQL language,
• Well experienced and have a good understanding of Unix/Linux Shell Scripting,
• Experience with JIRA, Confluence, Maven, GitLab, Jenkins, SonarQube, and other deployment tools.
• Having exposure to DevOps and DevOps tools.
• Knowledge on implementing solutions on the Cloud, preferably AWS

Nice to Have

• Experience in Business intelligence tools
• Experience in working with application monitoring and automation
• Experience in the Banking environment, especially in Capital Market IT

About ASUS

AICS is part of ASUS, a multinational company known for the world’s best motherboards, PCs, monitors, graphics cards and routers. Along with an expanding range of superior gaming, content-creation and AIoT solutions, ASUS leads the industry through cutting-edge design and innovations made to create the most ubiquitous, intelligent, heartfelt and joyful smart life for everyone. With a global workforce that includes more than 5,000 R&D professionals, ASUS is driven to become the world’s most admired innovative leading technology enterprise.

About AICS

AICS focuses on providing SaaS platform to solve the real problems in the healthcare industry. We are looking for a skilled and experienced backend software engineer to join our team!

As a backend software engineer, you will design, build and deploy distributed systems on the public cloud. Our culture advocates grass root innovation and continuous learning. Feed your passion, get inspired, and grow with us!

Responsibilities:

• Design and implement on-prem and cloud-based systems for scalability and security.
• Build and maintain high-availability backend services and reusable frameworks.
• Develop and optimize data platform solutions.
• Collaborate with cross-functional teams in agile sprints.
• Continuously monitor and enhance system performance.

Qualifications:

• 2+ years of experience in backend development.
• Strong interpersonal communication, problem-solving skills, and experience with peer code reviews to maintain code quality.
• Experience in designing, building, and running microservices in a polyglot environment, leveraging technologies such as TypeScript, Node.js, Python, and FastAPI.
• Proficiency in working with PostgreSQL and/or MongoDB.
• Familiarity with cloud platforms like Azure, GCP, or AWS.

Relocating to Norway, this is full time role .

Our client is a start-up developing solutions to bring small-scale hydropower plants into the future, turning them into flexibility resources for the energy market.

By creating intelligent control systems to coordinate hydro power production and utilise supercapacitors, it enabling these resources to operate in the frequency market and help stabilise the power grid.

You’ll join a team backed by industrial investors and public investment funds.

working along with a dynamic work environment with high skilled scientists from all over the world.

You will involve in building pioneering technology for energy optimization and stabilization of the power grid through advanced software.

Combining physics-based and data-driven modeling with state-of-the-art control and machine learning methods to build cutting edge autonomous solutions.

You’ll dive into complex R&D tasks like:

Modeling the dynamics of hydro power systems and power grid to serve as digital twins for simulation, estimation and control

Developing learning algorithms that fit models to real-world data.

Using models to develop advanced autonomous control solutions.

Creating predictive solutions to optimise operation and detect problems.

Qualifications

You have an engineering degree (M.Sc./Ph.D.) within cybernetics engineering, dynamical systems, optimization, estimation, or control.

You’re fluent in mathematical modeling, coding, automation, control systems, and/or machine learning.

Your expertise lies in fields like parameter estimation, machine learning/AI, nonlinear systems, Kalman filters, Bayesian methods, and adaptive control design.

Knowledge of hydro power, power grid or power electronics technologies are an avantage, but not a requirement.

If you specialise in one or more of these areas, you’ll be a great fit!

Personal Traits We Value:

Someone who are structured and good at planning.

You can break down complex problems into concrete, manageable tasks.

You combine theoretical knowledge with practical problem-solving.

You love team collaboration but also enjoy diving deep into technical challenges.

Motivated by solving the unsolvable, and thrive in a fast-paced, results-oriented environment.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 5+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 3+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Joining Razer will place you on a global mission to revolutionize the way the world games. Razer is a place to do great work, offering you the opportunity to make an impact globally while working across a global team located across 5 continents. Razer is also a great place to work, providing you the unique, gamer-centric #LifeAtRazer experience that will put you in an accelerated growth, both personally and professionally.

Job Responsibilities :

• Lead the development and packaging of new features and updates for Razer's Linux distro.
• Develop Linux applications and installers specific for Razer's Linux distro .
• Collaborate with cross-functional teams (e.g., product developers, system administrators, security engineers) to understand and address their needs in the distribution.
• Build and maintain an automated CICD pipeline for building and testing the applications and packaging for the distribution.
• Contribute to the upstream open-source community for projects relevant to the distribution.
• Stay up-to-date with the latest trends and advancements in the Linux kernel and distributions.
• Document processes and best practices for development and maintenance of the distribution.
• Troubleshoot and debug issues related to the distribution.

Pre-Requisites :

• Bachelor's degree in Computer Science, Engineering, or a related field.
• 5+ years of experience developing and maintaining Linux systems.
• Proven experience building and customizing a Linux distribution from scratch (e.g., Ubuntu, Arch, ) or significant contributions to existing distros.
• Strong understanding of the Linux kernel architecture and build system.
• Familiarity with packaging tools like APT, DPKG, RPM, Snap,Flatpak, etc
• Experience with scripting languages like Bash and Python.
• Excellent problem-solving and debugging skills.
• Strong communication and collaboration skills.
• Passion for open-source software and the Linux community.
• Familiarity with the Linux graphics stack and Vulkan API is a plus.

Preferred Qualifications

• Familiarity with containerization and sandboxing technologies, such as Docker or Podman.
• Experience with CI/CD pipelines for building and testing software.
• Experience with security best practices for Linux systems.

• Well Established Company
• Basic $4000 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Work with both R&D and Operation Managers to kick off improvement projects that aims at cost reduction, yield improvement, Human Resource Management (work along with HR), etc.
• Implement Lean manufacturing principles and best practices to drive process improvements across all production lines
• Develop Production standard procedure or Work Instructions and align these documents with quality management systems requirements
• Prepare and conduct training for Operation teams to ensure up-to-date compliances are practiced consistently
• Identify opportunities for process optimization and implement strategies to improve productivity and efficiency
• Collaborate with the R&D team to introduce new technologies and innovations to our manufacturing process
• Report monthly CI & other assigned KPI performance
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s Degree in Mechanical/Industrial Engineering, with minimum 1 year working experience in manufacturing environment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Chemical Process Engineer (Chemical Engineering / Operations)

• Tuas (Company Transport / Transport Allowance if candidate travel to work by themselves (S$120)
• 5 Days work per week (Mon to Fri 8am to 5pm)
• Basic: $3800 to $4300 + site allowances
• At least a Bachelor in Chemical Engineering + Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Career Progression Opportunities

Job scope

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turnkey manager to plan and execute plant shutdown

Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Package Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

• 5 days, Boon lay, Transport provided to & fro
• $4000 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• MNC (Manufacturing) - Cable & Connection Technology

• Working Hours: Monday - Friday: 8.30am - 5.30pm

• Working location at Tuas

• AWS + Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Interpret technical information (documents, drawings, and data) and analyse the manufacturing process elements.
• Create Bill of Materials structure.
• Create manufacturing Work Instructions and other process documents in collaboration with the Program Management, Production and Quality Assurance Teams.
• Carry out time studies and update the process cycle times.
• Provide timely technical support to the Production Team pertaining to manufacturing process and quality issues.
• Engage in DFM and Lean Line Design activities.
• Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.
• Actively and continuously improve the work processes to improve work efficiency and quality.
• Work with Program Management, Production, and Quality Assurance Teams to identify potential process risks and make recommendations to mitigate these risks.
• Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Requirement

• Diploma in Electrical, Mechanical/Mechatronics, Manufacturing/Production, Industrial Engineering or relevant discipline
• 2 - 3 years of relevant experience in manufacturing process engineering
• Possess experienced in the creation Bill of Materials structures will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

SIM BEI NA (R22111637)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a leading global company in semiconductor and FPD production equipment.

Duration: 1 year (renewable and convertible)
Working Location: Woodlands
Working Hours: Monday – Friday @ 8.30am - 6.30pm

Salary: Up to $4k

Responsibilities:

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling
• equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret to inform that only shortlisted candidates will be notified.

Interested candidate, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile > https://go.persolkelly.com/job/apply/10278

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394

• Reg. R24124631 (Moh Cheng' En, Desean)

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114