Requirements:

1. Minimum 4 years experience including Pipe Jacking

2. Civil Engineering Degree recognized by the Professional Engineers Board, Singapore

3. Company Vehicle will be provided

Duties & Responsibilities:

1.Preparation of construction schedule and monitoring of work progress.

2. Coordinate and supervise the civil work progress.

3. Oversee the planning, drawing management and implementation of demolitions.

4. Conduct meeting with sub-contractors to update progress of work.

5. Ensure works are carried out in accordance.

6. Liaising with local authorities, client’s representatives and sub con and consultants.

7. Review project specifications, tender classification and construction drawings.

8. Assist project manager in daily works.

JJob Level & compensation offered may vary depending on candidates’ experiences and competencies.

Responsibilities :

• Incumbent performs established procedures for clinical testing as required in all assigned laboratory disciplines. Incumbent is responsible for analyzing specimens whose results are then reported to the sponsor. Incumbent proactively seeks out opportunities to improve processes and procedures and demonstrates initiative in resolving problems. Supports quality control/quality assurance monitoring programs, and is responsible for assisting with training of personnel.
• Perform assigned clinical laboratory testing accurately and in a timely manner.
• Ensure the validity of tests results through the performance of established quality assurance and quality control procedures.
• Reagents/Materials/Supplies monitoring
• Ensures maintenance of instruments and equipment is performed according to manufacturer and SOP requirements, and documented according to SOP.
• Comply with regulatory guidelines and Labcorp Standard Operating Procedures (SOPs) at all times.
• Demonstrate proficiency in applicable computer systems and software.
• Adheres to established Safety policies and Universal precaution guidelines at all times. Maintains a clean, organized and safe work environment. Minimizes biohazard waste. Cleans workstation and materials daily.
• Takes action for the department when additional responsibilities and opportunities are presented.
• Provide laboratory management with a report of activities upon request.
• Attends, as scheduled, department, mandatory, and other meetings and training as required by training matrices
• Other duties as assigned

Requirements :

• Prior experience is good to have in the laboratory environment
• Bachelor’s degree in a bio-medical, physical or biological science from an accredited college or University and minimum 2 years of experience in the specialty in which testing is to be performed.

Responsibilities

• Prepare QA/QC procedures, Project Quality Plan, Method Statement, checklist and inspection form with project team members
• Monitor daily site QA/QC activities, ensure that QA/QC procedures, Method Statement and Project Quality Plan is adhered by the project team members
• Conduct raw material inspection, site inspection, testing, post installation check out (PICO) and issue QA/QC inspection report
• Monitor and ensure all the tools and equipment are calibrated when it is due and update in Tools and Equipment List FY XXXX
• Investigate the cause of non-conformance with project team members and recommend corrective / preventive actions, if require to prevent recurrence
• Ensure that all audit findings on non-conformance findings / reports and punch lists are properly addressed and closed together with the client
• Ensure proper documentation and filing of QA/QC records
• Conduct internal quality audit based on project quality plan and client requirement
• Attend client QA/QC meeting
• Assist in preparation of Final Documentations for handover to clients

Qualifications and Work Experience

• Diploma in relevant engineering
• Accredited ISO 9001 internal auditor certificate is an advantage
• Good QA/QC knowledge on electrical, signal and communication inspection and testing
• Good knowledge on interpretation of electrical drawings
• Good interpersonal, analytical and problem-solving skill
• Able to work independently
• Good oral and written communication skills
• Good Microsoft office knowledge and skills

1. To perform frontline diagnostic of problem and attend to end user at desk on IT related issues from the incident ticket raised by the end users.
2. To assist and support on network printers and VIP’s printers related issue such as create/modify print queue.
3. To assist and support on Webex Conferencing Video/Audio such as connectivity and accessibility to the end users.
4. To assist on system administration for onboarding and offboarding of domain users on credential account creation and disabled. Password creation, reset and unlock from the Active Directory only.
5. To perform day to day assignment and creation of equipment (desktop and laptops) from the asset management tool, Glpi where deployment guide and coaching will be enabled to the Resident Engineers by Customer.
6. To perform License Management Tracking from the Glpi management tool.
7. To perform support on iPhone such as deploy + install / uninstall of application. Basic troubleshooting.
8. To attempt support activities for after business hour support for VIP users (Adhoc – Remote support or Onsite support needed if requires hardware intervention) – Weekend and Public Holidays as well.
9. To follow the SOP and escalation process given by Customer as well as able to communicate well with VIP users.

Contract is 1 year and renewable

Location : CBD Area

• Manage all aspects of the construction execution; from site preparations to build-out, are carried out in accordance with the project timelines and specs.
• Ensure that the construction, installation and assembly of components, equipment and systems of the construction is aligned with the construction plans and drawing designs.
• Prepare construction progress reports based on contractual terms on time, cost and quality.
• Document action items and follow-ups from project meetings.
• Liaise with clients for site inspections, submission of necessary technical reports, and maintain all required records at the sites.
• Drive safety and sustainability.

The Requirements

• Possess a Degree in Civil Engineering or equivalent recognized by Singapore PE Board.
• Minimum 3-5 years' of relevant site experience work for mega projects is preferred.
• Must be technically inclined and possesses excellent problem-solving skill.
• Be able to work independently as well as acquiring good interpersonal skills to coordinate between the various disciplines and construction teams.
• Candidate can start work in short notice is preferred.

Only shortlisted candidates will be notified.

Responsibilities

• Responsible for planning and developing the organization’s long term and short term strategies.
• Conducts special studies for top management in areas such as organization's operational effectiveness, capacity utilization, operating cost containment, external environment etc.
• Implements corporate governance initiatives; manages and reviews Balanced Scorecard indicators.
• Monitors periodically and assesses the validity and viability of the organization’s existing strategies and projections.let
• Determines necessary revision to existing strategies with respect to economics, political, regulatory, market and competitive environment as well as internal organizational, financial and technical analysis.
• To develop a strategic fit strategies with the organization’s resources.

Requirements

• Candidate must possess at least a Bachelor’s/ Master’s Degree level in Business Admin/ Finance or equivalent.
• Minimum 5 year(s) of working experience in IT industry environment.
• Previous overseas experience in Japanese Multinational Companies will be an added advantage
• Fluent in Japanese/English.
• Proficient in Microsoft Office application.
• Excellent analytical, written, verbal communication and presentation skills.
• Pleasant personality.

Responsibilities

• Responsible for providing technical support to the plating department laboratory and engineering and manufacturing activities
• Responsible in resolving all chemical related issues.

Requirements

• Min Diploma in Chemistry or Chemical Engineering
• Min 3 years of working experience in laboratory in chemical industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Mechanical Design Engineer

• Working Hours: Monday-Friday [8.30am - 5.45pm]
• Location: Kaki Bukit
• Salary: $3,000-$4,500

Requirements:

• Degree/Diploma in Mechanical Engineering
• Degree with min 3 years design experience and Diploma with min 4 years design experience
• Good design experience in Machine Automation, Robotic Systems, Material Handling Systems and good to have experience in Fixtures & Tooling.
• Good knowledge on Solid Works / Pro E / AutoCAD
• Must able to travel in short notice & Good in Customer Engineering

Jobs Scope:

• To plan organize, co-ordinate and implement projects in timely manner
• Ensure schedule and requirements are met to customer criteria
• Participation in feasibility studies, quotation, design, product development to presentation.
• Follow up with hand on troubleshooting and training.

If Interest please kindly click on the Apply button

Ong Choon Kiat (James) | Reg No: R22104989

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Responsibilities:

• Responsible for installation, maintenance, troubleshooting and repairing of MALDI and TOF systems.
• Manage technical service matters including but limited to warranty claims from customers.
• Provide technical solutions and expertise to support regional partners' engineers via both onsite and remote modes.
• Other duties as assigned.

Job Requirements:

• Diploma or bachelor's degree in electronic and electrical engineering or equivalent.
• At least one year of experience in regional technical support role.
• Must be able travel in the Asia Pacific region.
• Familiarity with remote technical support is desirable.
• Prior experience with Mass Spectrometry (MS) or Time of Flight (TOF) will be a distinct advantage.

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates will be notified.

Jonathan Tan

Consulting Manager

EA Reg No: R1545359

Recruitment Agency License No: 23C1498

Join Our Team and Shape the Future of the Medical-Aesthetics Industry!

ClearSK Healthcare Pte Ltd manages the award-winning ClearSK® chain of medi-aesthetics clinics island-wide in Singapore and overseas branches in Shanghai, Hangzhou and Kuala Lumpur. As a Singapore leading aesthetics chain, it will be a great opportunity for you to grow and learn in a multi-disciplinary environment with medical and management professionals. You will find yourself working in a challenging environment, where your capabilities will be developed to the max. To fit in with our culture of excellence, we look for only the F.I.T.: Fast, Innovative and Trainable as well as commitment, integrity and professional skills.

Job Summary: ClearSK Medical Aesthetics Group is inviting a Corporate Development Analyst to support our strategic growth initiatives. This role is pivotal in analyzing and monitoring the progress of our corporate development projects and programs.

Responsibilities:

• Support the Marketing and Corporate Development Director in strategic project analysis and monitoring.
• Analyze daily reports and trackers from program PICs to assess performance against KPIs.
• Provide insights and recommendations based on quantitative analysis to guide corporate development strategies.
• Ensure alignment of project outcomes with the company’s growth objectives.

Qualifications and Requirements:

• Strong analytical and quantitative skills, with proficiency in data analysis tools.
• Ability to understand complex concepts and process flows.
• Background in business, finance, or a related analytical field.
• Excellent communication skills and a systematic approach to problem-solving.

Become a key player in driving the strategic direction of ClearSK Medical Aesthetics Group.

Application process:

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on MyCareersFuture:

https://forms.gle/hRJVt819mXFCyWXp8

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

Job Description

• Industry/Organization Type: Manufacturing of Scientific Instruments
• Position Title: Sales & Application Engineer
• Working Location: Upper Thomson
• Working Hours: Monday – Friday, 8.30 am – 5.30 pm
• Salary Package: Up to $4,500 + AWS + Transportation Allowance/Reimbursement
• Duration: Permanent

Key Responsibilities

• Perform end-to-end sales processes, including lead generation, negotiation, and closure, for a range of Scientific Instruments.
• Actively seek out new business opportunities and achieve sales targets through strategic planning and market analysis.
• Provide detailed technical consultancy to clients, offering solutions and addressing application challenges.

APPLY NOW!!!

• Minimum Diploma in Chemistry/Chemical/Engineering with at least 1 year of relevant working experience
• Candidates with background in sales or laboratory experience would be advantageous

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66161 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job description:

• Prepare basic design of heat, mass balance, PFD, P&ID, process calculation for Water & Wastewater, RO, Demin, Pre-Treatment, Biological, Chemical, Produced Water Treatment, Desalination, Electrochlorination, Zero Liquid Discharge, Ammonia/Sulphate Removal, Condensate Polishing, etc. applications.
• Knowledge of equipment sizing, vessel, tank and selection of material, instrumentation, control philosophy, cause and effect matrix, HAZOP, IPF, SIL study, IOM manual, etc.
• Prepare a bill of material for equipment and material and source for manufacturer, supplier and fabricator to build up the costing sheet with quotation and proposed additional AVL.
• Verification of performance guarantee such as process parameters, electrical power, chemical consumption, replacement, etc.
• Preparing datasheet for RFQ and review offers from sub-vendor for compliance to technical specification, Ex-d, ISA standards, codes and regulation.
• Support Tendering team in preparing proposals inline with tender requirements.
• Ensure all costs are captured accurately in the costing file. Review costings and technical solution with Head of Departments.
• Work with commercial and various cross functional teams like SCM, Project Management, Process, Mechanical applicants for supporting the bids in terms of techno-commercial costings and writeups.
• Identify potential risks in the bids, vendor quotations and estimates, and in any related contract agreements across customers/channels.
• Occasional travel to handle customer clarifications.
• Collects and archives documentations regarding the offer/order and records assumptions and decisions taken during the tendering process.

Job requirements:

• Bachelor Degree in Chemical/Environmental Engineering or equivalent.
• Familiar with international standards, codes and regulations, offshore and onshore.
• Minimum 3 years of relevant experience in Oil & Gas, Chemical, Power Plant Industries.
• Meticulous with ability to prioritize work tasks to meet deadlines.
• Good communication and presentation skills.
• Have experience working with international teams.
• Willing to travel.

Location: Jurong East

Working Hours: Mondays to Fridays @ 9:00 am – 6:00 pm

Cost Range: S$8k to S$9k

Requirements

Technical + Junior management role

1. Role and responsibilities

o This includes but is not limited to ticket handling, resource allocation, technical advisory and resolution, etc.

o Assist the Tier 1 Engineer to resolve the technical challenges. Guide/Mentor the Tier 1 Engineer for ticket closure and our best practices.

o Undertake tickets that are beyond the capability of Tier 1 Engineer.

o Validate and reject/approve Tier 1’s MOP to ensure the contents are appropriate and address the intent.

o Undertake the patching for products that are new to the team. Empower Tier 1 Engineer with the knowledge for future undertaking.

o Devise technical propositions with validation to address highly challenged situations.

• Minimum Cisco CCNP (12 months upon onboarded) and Alcatel ACSE certified.
• Pick up new skillset for work requirements.
• Co-train the Tier 1 Engineers to align and upskill the team’s technical competency.

1. Technical Competency

Tier 2 must be skilled in the following:

Products Knowledge

• Cisco Routers, Cisco Catalyst Switches, Cisco Nexus Switches, Cisco ISE, Cisco wireless, Cisco Firepower, SolarWinds, Alcatel Switches, and Smart Licensing (air-gapped environment).
• I/O Modules, SSO, RPR, Sup Replacement with zero downtime, etc for the abovementioned products.

Hands-on Skillsets

Hardware Issue / Patching / Vendor Engagement

• Provide remote or physical onsite support to rectify the technical issue.
• Understand the escalation process well enough to provide timely and accurate support to the team members.

Troubleshooting Skillset

Strong troubleshooting Knowledge in:

• Strong technical competency. Able to resolve 70% of the tickets undertaken.
• VLANs (Access/Trunk/Native VLAN), Spanning tree protocols (802.1d and 802.1w).
• First Hop Redundancy Protocols (HSRP, VRRP – with and without object tracking).
• EtherChannel/Port Channel/virtual Port Channel (vPC), Port Security, Local SPAN.
• IP Routing (Static routing, OSPF, EIGRP, and BGP) for VRF and non-VRF routing.
• Tunnelling Protocols (GRE, IPSEC), IP MTU, IP MSS
• Intermediate understanding of Multicast (PIM-SM) – Able to explain the functional components of PIM-SM. Able to troubleshoot MSDP issues and devise a plan to restore the multicast flow.
• VRF-based troubleshooting for IP routing and Multicast.
• ACL, AAA, 802.1x, Radius and TACACS+.
• NTP, Syslog, local logging
• SNMPv2 & SNMPv3 – SNMP polling vs trap.

1. Mastery of New Technology

• Mastery of Cisco Firepower (FMC, FTD, and FDM) for Day 2 function
  • Able to perform image software of Cisco FMC, FTD, and FDM (all in standalone and HA configuration). Backup and restore config. Understand and able to deploy basic firewall rules.
  • Understand and able to execute license transfer for Firepower and other Cisco equipment (Understand Traditional License vs Smart Licensing – air-gapped environment (SLR, PLR))
• High-level understanding of Cisco ISE for 802.1x and AAA
  • Able to infer based on technical assessment if the issue is related to network devices or Cisco ISE.
  • Able to articulate the function of 802.1x and AAA in an operational or failure state. What are the workarounds if ISE’s services have misbehaved or failed.

Job Description

• Pre-plan and prepare construction schedule, coordinate activities

• Close monitoring of construction work activities

• Study project specifications such as civil/structural, architectural and M&E drawings

• Prepare daily/weekly/month site report

• Maintain safe and clean working environment and ensure compliances according to standard rules and regulations

• Liaise with both internal and external parties for efficiency.

• Other ad-hoc duties as assigned by Project Manager

Requirement

• Degree in Engineering (Civil) or related field recognised by PE Board.

• Minimum 5 years of work experience in similar capacity

• A team player with good communication skills

• Meticulous and attentive to details

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring products produced meet the product and customers' quality requirement
• Responsible for developing and improving the processes to gain productivity, efficiency, quality and costs.
• Responsible for coordinating NPI/NPQ activities with details and meeting timeline.
• Responsible for supporting and resolving daily technical issues in operations
• Responsible for supporting analysis of failures from yield loss, reliability failures, new products, new materials.

Requirements

• Min Diploma in Electronic Engineering, Material Science or relevant
• Min 5 years of working experience in semicon assembly and test environment
• Experience in Assembly FOL of dicing, die attach, wire bond
• Experience in maintenance of assembly and test machines of dicing, die attach, wire bond encapsulation, testing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

You will be involved in initiatives for the attraction and retention of various professional talents within SingHealth, which will include administration of awards ceremonies, coordination of staff recognition nominations and management of pre-service scholars. You will also partner stakeholders to organise career talks and career fairs to promote SingHealth as an employer of choice to students and mid-career switchers.

Job Requirements:

• Bachelor’s degree in Business Administration/ Marketing/ Communications or other related fields
• Fresh Graduates are welcome to apply
• Strong communication, organisational and interpersonal skills
• Good team player, independent and resourceful
• Proficient with Microsoft Office applications
• Must be fully vaccinated against COVID-19

Our client is a local Audio Video (AV) System Integration Company. They are now recruiting an Engineer to be part of their Engineering team for ongoing transformation projects. They are located in the East Area - easily accessible.

Roles and Responsibilities:

• Configure, test, and commission integrated audiovisual and video conferencing solutions.
• Collaborate with internal teams and engineers from various manufacturers (Samsung, BOSE, Crestron, Extron, Poly, Logitech, etc.) to implement integrated solutions for diverse venues such as meeting rooms, lecture halls, experience centers, command centers, auditoriums, ballrooms, etc.
• Analyze schematic drawings to grasp technical and functional requirements for solution implementation.
• Conduct testing and commissioning (T&C) as well as user acceptance testing (UAT).
• Develop system documentation/user guides and provide end-user training.

Requirements:

• Minimum ITE in IT related discipline
• Minimum 2 years of experience in Audio Visual solution
• Proficient in programming languages and control system design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

About MyrLabs

MyrLabs is an A*STAR spin-off that creates cutting edge hardware and algorithms. The MyrLabs team consists of driven and multi-disciplinary engineers dedicated to bringing game-breaking solutions for our partners by innovating at the PCB, firmware, and software levels. We work on problems that academia fears to, cannot, or will not address. These are problems that are difficult and require multi-disciplinary efforts. Our approach focuses on the use of non-mainstream techniques to spark creativity and to solve problems in ways that are not seen before.

Job Brief

We are looking to hire Robot Designer Engineers to join our Robotics Team. This is a position for a research-focused role towards designing, building, and prototyping ground wheeled robots. Our roadmap of planned robots includes small robots (200W x 150D x 200H mm) and large robots (1800W x 1200D x 1800H mm). These robots’ purpose is to showcase our work on cutting edge algorithmic capabilities for robots and new design paradigms for robots. Your work will involve the creation of robots from scratch and enclosures that sit atop existing off-the-shelf robot chassis platform.

This is a difficult job role that will require a mix of design, mechanical engineering, and electrical engineering expertise. While we do not demand for you to possess the entire skillset, you must be willing to acquire the missing skillsets over the course of your employment and commit to becoming a multi-disciplinary engineering staff.

MyrLabs’ intends to create robots that defy existing design norms. We are looking for people who are creative and have the passion to create sophisticated mechanical objects.

Responsibilities

1. Work with the Senior Management Team to conceptualize robots that align with the Company’s roadmap and plans

2. Developing new ideas for robots and presenting them to the Senior Management Team

3. Sketch, CAD, and then realise/produce the concept robots

4. Work with other R&D staff to integrate sensors, computers, and other hardware on the robots

Stance on Skills-based Hiring

MyrLabs has pledged support for the skills-based hiring movement; candidates are assessed based on a ‘skills first’ approach over qualifications. Candidates from ITE or Polytechnics are welcome to apply for the position.

Critical Skills

- Demonstratable expertise in using SOLIDWORKS, Fusion 360, NX, or equivalent professional CAD software

- Demonstratable ability to draw, sketch, create, and present conceptual drawings

- Demonstratable expertise in product design, problem solving, and/or creative thinking

Nice to Haves

- Demonstratable expertise in mechanical engineering, electrical engineering, and/or programming

- Demonstratable ability to conduct focus groups and extract requirements

- Demonstratable knowledge of manufacturing standards and practices

- Demonstratable experience in identifying design, production, material and technology market shifts

After application, please send your resume, MBTI profile, and portfolio of previous work or ideas to [email protected]

You can do a free MBTI test at: https://www.16personalities.com/free-personality-test

Requirements

· Bachelor’s degree in IT related field with relevant work experience.

· At least 2 Year(s) of working experience in the related field is required for this position.

Responsibilities

· Provide onsite and remote desktop assistance to identify and resolve issues with Windows, CCTV, and network switches.

· Administration of WordPress, cPanel, Backup, Office 365, Anti-Virus, Windows Deployment Services and Window Server Update Services for servers and workstations.

· Administration of Windows Server 2008 R2/2012, Windows 7/10, cPanel – Mailbox Creation, and Distribution Groups.

· Handling of TCP/IP networks with the interrelation with Windows systems.

· Schedule purchase and deliveries of material for the project.

· Responsible for attending for system breakdown call and able to troubleshoot the system.

· Administration of Checklist System, Fault Monitoring System.

· Carry out planned system check to ensure system working properly.

Job Description

• Industry/ Organization Type: Equipment Manufacturer/ Advanced Packaging Solutions
• Position Title: Software Engineer / Senior Software Engineer
• Working Location: Woodlands
• Working Hours: 5 days, Monday – Friday (9 AM – 6 PM)
• Salary Package: Basic + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Sustain and continuously improve current machine software.
• Develop and enhance software features based on customer requirements.
• Provide on-site software issue support and troubleshooting.
• Review and update user requirement documents and operation procedures.
• Collaborate with mechanical, electrical, and application teams to implement new hardware and software features.
• Develop software utilities to improve equipment setup and ease of operation.

APPLY NOW!!!

• Bachelor's or Master's degree in Electrical / Electronic / Computer Engineering or equivalent.
• Proficient in C and C++ programming with Windows OS.
• Experience in PC-based control programming.
• Willingness to travel regionally.
• Knowledge of real-time control systems, object-oriented software design methodologies, and database technologies.
• Strong knowledge of vision, motion, and Secsgem would be advantageous for a senior position.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65762 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Process Technician (Jurong Island)

Responsibilities:

• Perform field logging, routine sampling and plant process testing work
• Provide operating support in the assigned process unit in DCS panel and/or field position.
• Handle daily operational tasks and participate in plant troubleshooting.
• Prepare process equipment for maintenance work according to Standard Operating Procedures and Instructions
• Carry out loading/unloading and raw material charging activities
• Perform housekeeping in the process area
• High awareness of job safety and housekeeping

Requirements:

• Minimum NITEC/Diploma or equivalent qualification (Chemical /Mechanical or Mechatronics Engineering)
• Possess working experience in an oil/ gas/ petrochemical/Chemical industry
• DCS panel experience will be an added advantage
• Transport provided

Interested applicants please submit your updated resume to [email protected]

Job Description

• Industry/ Organization Type: Manufacturing/Semi-conductor
• Position Title: Senior Sales Engineer/Sales Engineer
• Working Location: Kaki Bukit
• Working Hours: Monday – Friday, 8.30 am – 5 pm
• Salary Package: Up to $5,500 + VB
• Duration: Permanent

Key Responsibilities

• Responsible for sales of Spare Parts, General Service, and Modification (Customer account based).
• Handle customer sales enquiries/ complaints regarding modification/spare parts/ service etc.
• Work with Equipment Sales Account/ FSO Technical/ Direct Dealing with customers for closing the issue or sales matters.
• Handle customer enquiry, RFQ, make sales proposal and quotation activities etc.
• Responsible for sales negotiation and closing of sales.
• Liaise with customer, Japan counterpart for urgent delivery issue and any commercial sales/spec/ price issue.
• Responsible for Japan factory engineer labour order and process.
• Bi-weekly/Monthly reporting for sales of spare parts, service, modification, sales forecast update (Customer account based).
• Analyze monthly sales invoice of modification/ spare parts, and the forecast planning (Customer account based).

APPLY NOW!!!

• At least a Diploma in any discipline with minimum 3 years of relevant experience
• Proficient in Microsoft Office programs

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65835 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing/Aerospace Engineering
• Position Title: CAD/CAM Engineer
• Working Location: Seletar Aerospace Park
• Working Hours: Monday – Friday, 8 am – 5.30 pm
• Salary Package: Up to $4500 + AWS + VB
• Duration: Permanent

Key Responsibilities

• Perform CAM programming for mills and lathes in 4 & 5-axis machines.
• Create new and edit/modify existing NC programs using NX12 software.
• Create 3D solid models.
• Able to interpret CAD drawings and consider processes required.
• Identify & design work holding/ fixturing, as needed.
• Identify and apply appropriate tooling based on material types, equipment considerations, cutting conditions, etc.
• Maintain tooling database and inventory.
• Troubleshoot issues.
• Any other duties as and when assigned by immediate superior.

APPLY NOW!!!

• Diploma in Mechanical Engineering or a minimum of 3 years of experience in CNC programming.
• Demonstrated knowledge of CNC programming with the ability to program mills and lathes in 4 & 5-axis machines.
• Demonstrated ability to read and interpret CAD drawings.
• Demonstrated knowledge of GD&T.
• Proficient with UG NX12 CAD/CAM software.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66090 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Job Description

• Industry/ Organization Type: Manufacturing/ Petrochemical
• Position Title: Process Technician
• Working Location: Tuas
• Working Hours: 5 days, Mon – Fri (8.15 am – 5.30 pm)
• Salary Package: Basic + Allowance + AWS
• Duration: Permanent

Key Responsibilities

• Provide support to ensure smooth and safe operations in the process plant.
• Safely operate pumps, compressors, reactors, and other plant equipment.
• Monitor performance of plant equipment and process conditions.
• Read flow meters and temperature and pressure gauges.
• Take routine readings on process variables.
• Ensure environmental compliance.
• Collect product samples for laboratory testing.
• Test process streams as needed.
• Other ad hoc tasks as assigned.

APPLY NOW!!!

• Willing to work in a Petrochemical environment.
• Candidates without experience are welcome to apply, training will be provided.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65087 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781