Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

Key Responsibilities:

• Design and deploy functional networks (LAN, WAN, WLAN, VLAN) & security (FW, NAC) solutions tailored to client needs
• Configure and install routers, switches, wireless controllers, firewalls and other network devices
• Monitor network performance and integrity, ensuring high availability and reliability
• Troubleshoot and resolve network issues escalated by support teams
• Communicate with clients to understand their requirements and provide technical support
• Maintain comprehensive technical documentation
• Propose and implement improvements to network performance, security, capacity, and scalability
• Participate in project deployments, ensuring seamless integration and implementation of network & security solutions

Requirements:

• 3 to 5 years of experience in the networking field, preferably with a systems integrator
• Hands-on experience with wired and wireless networking deployment
• Aruba Wired or Wireless certification is a must
• Well-versed with the different types of network routing and switching technology.
• Knowledge of wireless technology and products.
• Proven experience as a Network Engineer or in a similar role
• In-depth knowledge of best practices in network management, control, security, and monitoring
• Good experience with firewalls, VPNs, remote implementations, and troubleshooting
• The ability to set up and configure server hardware will be an added advantage
• Excellent organizational, prioritization, and multitasking skills

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Mission Software & Services

Our Mission Software & Services business provides leading-edge mission critical command, control, and communications (C3) systems with secured IT infrastructure and managed services. We support our client’s innovation journey through design thinking, analytics, and AI-enabled decision support with our full suite of cloud computing solutions. We provide intelligent, actionable insights and sustainable solutions to our valued partners in diverse industries including defence, government, and commercial sectors.

Together, We Can Make A Significant Impact

You will be part of the team responsible for the operational support of Authority's Service Desk and expected to work independently. Your primary responsibility is to ensure system functionality, availability, data security, and compliance with industry standard.

Be Part of Our Success

• Providing level 1 technical support and respond to user inquiries via phone, email and ticketing system.
• Hardware – installation, maintenance and trouble-shooting.
• Diagnose and resolve hardware and software issues for end-users.
• Escalate complex issues to higher-level support teams as necessary.
• Maintain and update service desk documentation and knowledge base articles.
• Proactively identify and manage potential problems
• Conducting regular checks to ensure all endpoints are patched to the latest version.
• Conducting regular checks to ensure all endpoints and communication devices in meeting rooms are working properly.
• Collaborate with other IT team members on projects and initiatives.
• Provide training and guidance to end-users on IT systems and software.

Qualities We Value

• Minimum 1 year of experience in a technical support or service desk role.
• Strong understanding of computer systems, communication devices such as skype and video conferencing technology and other tech products.
• Proven track record of excellent problem-solving skills.
• Effective communication skills, both written and spoken.
• Ability to work independently and as part of a team.
• ITIL certification is a plus

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

• Undertake construction supervision as RE of underground building works and civil infrastructure, involving site inspection, meetings and review of drawings and method statements in accordance to customer specifications, applicable codes, standards and other generally accepted practices
• Carry out independent design checks for temporary formwork and formwork support system
• Keep quality records of all works, monitor and report on work progress
• Review and comment on contractor's submissions
• To review and supervise safety, environmental and health matters
• Station full-time on site to support Senior Resident Engineers (SRE) and the QP(S) with projects
• Requirements:
• Experience in Underground work/ viaduct work
• Minimum Diploma in Civil and/or Structural Engineering from an established institution and/or qualification accredited by JAC of IES/ACES as QSS
• Minimum 3 years of relevant experience as RE for LTA project (MRT, underground, tunnelling works) or PUB project
• Has good working knowledge of Geotechnical and instrumentation works and compliance to Singapore Building Regulations
• Good analytical ability with strong verbal and written communication skills
• Independent, organized with positive work attitude

Responsibilities:

- Design and implement integration solutions for various physical security systems, including access control, video surveillance, intrusion detection, video analytics and alarm systems

- Ability to understand and address customer requirements and translate them into technical solutions

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Collaborate with cross-functional teams to gather requirements and define project scope

- Conduct site surveys and assessments to determine integration needs and best practices

- Conduct POC, demo, testing and setup of security system and video analytics

- Manage and execute projects with strong project management skills

- Develop documentation, including system specifications, integration plans, and user manuals

- Stay updated on industry trends, technologies, and best practices related to physical security

Requirements:

- Bachelor’s degree in Computer Science, Engineering, or a related subject

- Programming skills in Python, C++ and/or Javascript

- Fullstack experience is strongly preferred

- Strong understanding of networking, database management, and software integration

- Familiarity with industry standards and protocols (e.g., ONVIF, BACnet, etc.)

Nice to have:

- Professional experience working with VMS systems and integrating 3rd party solutions

- B2B (Business-to-Business) experience in physical security

- Technical security system certifications (I.e., Gallagher, Genetec, BICSI, Milestone) and/or related IT (i.e., CCNA) certifications preferred

- Possess market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

Job Scope:

• Develop and implement quality control procedures and policies
• Conduct inspections and audits to ensure compliance with quality standards
• Monitor and test materials, products, and processes to verify quality
• Identify and resolve quality issues and non-conformance
• Review project specifications, drawings, and standards for quality requirements
• Prepare quality reports and document test results and inspections
• Coordinate with suppliers and subcontractors to ensure quality requirements are met
• Perform root cause analysis for quality failures and implement corrective actions
• Ensure that safety and environmental standards are followed during inspections
• Train and mentor staff on quality control processes and best practices
• Maintain records of quality inspections, certifications, and test results
• Support project managers in quality planning and control
• Ensure continuous improvement in quality processes and systems

Requirements:

• Engineering degree
• 5+ years of QA/QC experience in construction
• Experience in structural steel or precast RC works
• Strong interpersonal and communication skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Functional and Automation testing experience including tools such as Selenium, UFT, JIRA, Postman

• Bachelor's Degree in software engineering, computer engineering, electrical engineering or infocomm-related discipline

• Must have professional software quality testing experience with hands-on automation

• Strong understanding of testing techniques, risk analysis

• Strong understanding of test-driven development, continuous integration and continuous delivery

• Experience with automation scripting (i.e. Python and shell scripts)

• Experience with open-source automated testing frameworks (i.e. RobotFramework, Selenium Webdriver)

• Experience with open-source performance testing tools (i.e. JMeter, Gatling, Locust) or enterprise level testing tools (HP LoadRunner)

• Experience with open-source penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise level penetration testing tools (HP WebInspect, Nessus, CheckMarx)

• Working experience in Agile environment will be an added advantage

• Excellent verbal communication and listening skills

• Proactive, self-driven and motivated

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Net's Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asia's Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. It's uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

This role is required to managed and support 1-Net's IT Services business, including Cloud Services, Managed Services, DC services, and Business Continuity Management Services.

Responsibilities

• Providing 2nd/3rd level support to Network Services
• Problem resolution in customer network issues
• Plan, implement, review and project manage network infrastructure projects and operations
• Test, evaluate and recommend new networking products for customers
• Review and continuously enhance existing network services
• Improve network performance; optimize network usage and bandwidth usage and secure the core network
• Optimize routing policies and capacity management to ensure minimal network latencies and outages
• Secure network with relevant security policies
• Responsive to solve network issues, on standby 24x7
• Assist L1/L2 Engineers to handle customers' issues directly
• Recommend suitable and relevant solutions to solve customers' issues
• Provide maintenance support for all network infrastructure
• Provide monthly network infrastructure performance review report and capacity planning recommendations
• Ensure efficiency and effectiveness of the implemented solutions in meeting user's requirements and work processes and procedures.
• Ensure timeliness & quality of project delivery.
• Structured cabling system implementation and cross connect provisioning.

• In depth practical experience in LAN/WAN implementation which include router & switches setup and configuration.
• Knowledge and experience with networking protocols, including BGP, VXLAN EVPN, OSPF, IOX-XR, NX-OS
• Structured Network Infrastructure for Layer 2 & 3 support.
• Certification in CCNA, CCNP is highly preferred
• Shift work required

Job Description :

• Develop a preliminary and/or baseline schedule based on the client's requirements/milestones, and scope of work.
• Identify the critical path and take note of any foreseeable risk that may affect the project schedule.
• Prepare manpower and equipment loading plans
• Preparation of all the necessary materials for Plant
• Maintenance Works (Piping & structural works)
• Planning & execution of works based on the work Schedule
• Preparing necessary Q.C Documents RA / JSA & Permits to Work at Site
• Preparing necessary payment documents for completed jobs.
• Determine and implement the most efficient sequence of work to ensure it meets the client's and the company's needs.

Requirements:

• Diploma in any discipline with minimum 4 years and above of relevant experiences in oil/gas, storage tank terminals etc.
• Having CSWIP 3.1 Welding Inspector certificate is advantageous
• Familiarity with the techniques and working methods used in the sector
• Familiar with codes such as ASME ,API codes etc.

• Well Established Company
• Basic $3800 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Work with both R&D and Operation Managers to kick off improvement projects that aims at cost reduction, yield improvement, Human Resource Management (work along with HR), etc.
• Implement Lean manufacturing principles and best practices to drive process improvements across all production lines
• Develop Production standard procedure or Work Instructions and align these documents with quality management systems requirements
• Prepare and conduct training for Operation teams to ensure up-to-date compliances are practiced consistently
• Identify opportunities for process optimization and implement strategies to improve productivity and efficiency
• Collaborate with the R&D team to introduce new technologies and innovations to our manufacturing process
• Report monthly CI & other assigned KPI performance
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s Degree in Mechanical/Industrial Engineering, with minimum 1 year working experience in manufacturing environment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Description:

• Coordinate office activities and operations to secure efficiency and compliance with company policies
• Manage agendas/office arrangements/appointments etc. for the upper management
• Manage phone calls and correspondence (e-mail, letters, packages, etc.)
• Support budgeting and bookkeeping procedures
• Create and update records and databases with personnel, financial, and other data
• Track stocks of office supplies and place orders when necessary
• Submit timely reports and prepare presentations/proposals as assigned
• Assist colleagues whenever necessary
• Other ad-hoc duties assigned by management

Requirement:

• High school diploma and above, preferred with minimum 3 years experience related works
• Excellent communication and presentation skills
• Ability to multitask, prioritize, and manage time effectively

The M&E Officer need to manage the "M&E process" which can include multiple task and people.

• Performing checks on the M&E materials/works to ensure that the final touch-up works are ready for inspections.
• Good knowledge of construction quality control/assurance
• Conducting regular inspections to ensure works are in compliance with method statements (in accordance to BCA’s Good Industry Practice)
• Monitoring the performance of maincontractor workers for all trades and ensure any defects are properly rectified
• Supervising M&E maincon works and ensure main-contractor’s progress in accordance to schedule set
• Any other duties as may be required by the Company.

Job Requirements

• Diploma or Certified in construction related field.
• Minimum 5 years’ experience in construction projects.
• Able to work independently and possess strong leadership quality
• Require working on site experience
• Related safety course certificate
• Ability to use measuring devices like gauges, meters,calipers etc.

1. To carry out all responsibilities of a Site Supervisor in a Construction site

2. Able to train skills for both carpenters and rebar workers

3. Min 10 years relevant experience in the related field for this position

4. Be able to work independently with minimum guidance

5. Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of project

6. Ensure a consistently high standard of work is produced in accordance with specification and quality standards through regular quality inspections with sub-contractors.

7. To oversee daily operation at site. Direct and supervise day to day operations of sub-contractors ensuring appliance of common operational procedures.

8. To ensure that workers comply with all safety measures required. Require to carry out the effective implementation of work safety programme.

9. Liaise with sub-contractors Manager/Project Manager, Site Manager/Agent, and Contract Surveyor regarding cost control, waste management, variations and confirmation of instructions.

• To prepare the site for work, which may include taking on staff, planning the work schedules, and establishing on site offices, in accordance to the objectives established by the Site Manager.
• Laying down the preferred construction methods.
• Negotiate contracts with external vendors to reach profitable agreements Determine needed resources (manpower, equipment and materials) from start to finish with attention to budgetary limitations
• Plan all construction operations and schedule intermediate phases to ensure deadlines will be met
• Acquire equipment and material and monitor stocks to timely handle inadequacies
• Hire contractors and other staff and allocate responsibilities
• Supervise the work of laborers, mechanics etc. and give them guidance when needed
• Ensure adherence to all health and safety standards and report issues

Requirements and skills

• At least 10 years related working experience in Building Construction
• In-depth understanding of RC structure work, expert in Formwork and Rebar.
• Well known in construction procedures and material and project management principles
• Working hours 6 days per week
• Strong construction background to discuss and advise technical matters with Main and Sub Contractors.
• Excellent Communication skills and highly organized, driven and conscientious.
• Bilingual in English and Mandarin in order to communicate and engage with Mandarin speaking customers

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

As an Associate Process Engineer, you will work on monitoring and sustaining process / SPC to ensure quality of products are meeting specification.

Your Job:

• Analyze SPC charts using SPACE
• Respond to all PR rules and follow CAS correctly.
• Work on basic annotation and achieve quality troubleshooting rate for SPC OOC points.
• Monitor all qualified processes using SPC and other statistical tools.
• Perform shift duties (12-hours shift) to support the running of production in the Module and ensure that integrity of the tools is in place to run the process.
• Assist Engineers in the qualification and fine tune of new processes and new equipment for production.
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements, and programs

Required Qualifications:

• Diploma in any Engineering streams
• Experience in wokring with Electronics / Manufacturing sectors
• 1-2 years of experience in working with SPC tools
• Good understanding of the SPACE
• Willingness to work in weekend / rotational shifts

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Intro to GF

GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF

Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Introduction:

We are expanding our Fab Operations and are looking for Process Engineers, in this role you will sustain and improve process / SPC to meet quality, cost, productivity requirements. Process improvement to eliminate inherent process weakness to achieve company goals.

Your Job:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance.
• Do proper annotation to maintain quality troubleshooting rate for SPC OOC.
• Understand Cp and Cpk indices.
• Monitor critical SPC charts daily.
• Perform process window study and provide improvement plan to reduce OOC and improve CPK.
• Review ESPC charts using SPACE.
• Know all the rules for ESPC.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Raise PCRB and understand the requirement for PCRB opening, follow through with qual plan, analyze data using required software and CR closure.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues.
• Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline.
• Work closely with Equipment Engineer on new equipment acceptance.

Required Qualifications:

• Degree in electrical / electronic / Mechanical / Microelectronics / Chemical process Engineering / Chemistry / Physics
• 2 years of working experience in electrical / electronics industry
• Team Player
• Good ownership and accountability
• Good verbal and written communication skills
• Flexible and able to support overtime
• Self motivated, meticulous, and discipline
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

This role is responsible for one of the front-end process modules in Office Printhead or PageWide Printbar manufacturing lines and required to apply subject matter knowledge to drive technical and operational excellence in the manufacturing processes. Expected also to work on problems of diverse complexity and scope.

May participate in project team activities and facilitates information validation and team decision making process. Exercises independent judgment within generally defined policies and practices to identify and select a solution. Ability to handle most unique situations. May seek advice in order to make decisions on complex business issues.

Responsibilities

• Designs engineering solutions, including methods, operation sequences, and processes for the manufacturing of parts, component sub- assemblies, and final assemblies, based on established engineering principles and in accordance with general specifications and requirements.
• Lead issue diagnosis and problem-solving, using a systematic problem solving approach.
• Work in a project team of other manufacturing engineers and internal and outsourced manufacturing partners to develop and execute reliable, cost effective and high quality manufacturing solutions for moderately-complex products from new- product introduction through end of lifecycle.
• Delivers professionally written reports, and supports realization of operational and strategic plans.
• Collaborates and communicates with management, internal and external partners in outsourced manufacturing or development r regarding process and standards compliance, recording and reporting issues, and recommendations for problem resolution for manufacture of existing products.
• Represents the manufacturing engineering team for all phases of larger and more- complex development and manufacturing projects.

Education & Experience Recommended
• Bachelor’s or Master’s degree in Manufacturing engineering, Mechanical Engineering, or any other manufacturing related discipline
• Typically has 2-4 years of work experience, preferably in product/process engineering, or a related field or an advanced degree with 0-2 years of work experience.

Knowledge & Skills

• Using engineering tools and software packages to design and automate manufacturing processes.
• Strong analytical and problem-solving skills.
• Competent in adopting manufacturing methodologies such as Lean Manufacturing, Continuous Improvement etc.
• Understanding of material properties and hardware and electrical component design.
• Using empirical analysis, modeling and methodologies to validate manufacturing process and tooling design and specifications.
• Proficient in English. Good written and verbal communication skills.
• Ability to effectively communicate ideas to stakeholders
• Competency in Industry 4.0 technologies/Digitalization/Data Analytics is a plus.

Impact & Scope
• Impacts immediate team and acts as an informed team member providing analysis of information and limited project direction input.

Complexity
• Responds to routine issues within established guidelines.

Disclaimer
• This job description describes the general nature and level of work performed in this role. It is not intended to be an exhaustive list of all duties, skills, responsibilities, knowledge, etc. These may be subject to change and additional functions may be assigned as needed by management.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Associate Engineer to be part of our PHOTO Process Department diverse team of talent.

What you will be working on:

• Perform shift duties (12-hour shift) to support the running of Production in the module and ensure that process integrity for machines is in place for production
• Assist Engineers in the qualification and fine tuning of processes for production
• Trouble-shoot process related issues and minimize the time lots are on hold
• Monitor and improve on the qualified process using SPC and other statistical tools
• Co-ordinate with Specialists to ensure that work is carried out efficiently to meet module objectives and that SOPs are strictly followed
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the module
• Work with QA on internal audit
• Create job-files for metrology tools for production set-up, and housekeeping of files
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Diploma / ITC / NTC in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Able to perform 12-hour rotating shift
• Team Player

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities:

• Preparation of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Prepare technical proposal c/w PFD, P & ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new products technical evaluation

Requirements:

• Degree in Chemical Engineering / Mechanical engineering / Equivalent
• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/MBR), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)
• 3 years relevant working experience in Water & Waste Water Treatment industries is preferable. Fresh graduate can also apply.
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details
• Process the mental and physical staminal to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / visions
• Proficiency using Microsoft Office and Microsoft Project
• An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate.

Interested applicants, please apply directly to the email below, with a detailed resume, stating present and expected salary, date of availability and/or notice period required.

Please indicate in your application the position applied.

We regret to inform that only shortlisted candidates will be notified.

MEMIONTEC PTE LTD
20 Woodlands Link #04-30/31

Woodlands East Industrial Estate
Singapore 738733

Company Overview

Emplifi is a culture-driven, growing, fast paced human resource agency and licensed recruitment agency. We specialise in enabling Small & Medium Enterprises (SMEs) in Singapore from professional services, F&B, retall, Construction, Wholesale industries to grow competitively.

We offer Recruitment Process Outsourcing, Outsource HR Operations & HR Business Partnering Advisory services. Our unique value comes from our active sourcing methodologies and full time experienced HR team and the advisory we provide to our clients on how to navigate human capital challenges in Singapore.

Role Overview

As a Business Development Director, you will play a key role in driving new business opportunities and growing our client base, targeting foreign entities entering Singapore. You will be responsible for identifying and nurturing leads, building relationships with prospective clients, and presenting our suite of recruitment solutions to key decision-makers in various industries. This position offers a unique opportunity to contribute directly to the company’s growth and success.

Key Responsibilities

• Lead Generation & Prospecting - Identify and generate new business leads through various channels including, networking, and referrals, partnership. Leverage market research to identify potential clients in need of RPO & HR Operation services in the Professional Services, Retail and F&B sectors.
• Sales Presentations & Proposals - Conduct consultative sales calls and meetings with prospective clients to understand their HR needs, pain points, and business goals. Present tailored HR solutions and services to prospects, demonstrating how Emplifi can meet their hiring challenges.
• Contract Negotiation & Closing - Lead negotiations to close sales and secure new contracts. Work closely with internal teams to ensure successful service delivery and client satisfaction post-sale.
• Sales Forecasting & Reporting - Track and report on sales activities, pipeline progress, and performance metrics. Weekly updates with accurate information regarding lead status, opportunities, and potential deals.
• Market & Industry Expertise - Stay current on market trends, competitor offerings, and industry best practices to continuously refine the sales approach. Use this knowledge to effectively position Emplifi’s services and differentiate it from competitors.
• Collaboration with Internal Teams - Collaborate with the recruitment, HR Operations and client success teams to ensure seamless service delivery and to identify new opportunities for cross-selling or upselling existing clients.

Key Requirements

• Experienced in regional and/or China markets.
• Native speaker and business proficiency of Mandarin as candidates will be targeting Chinese firms entering Singapore
• In-depth understanding of the Chinese corporate culture and decision making process
• Proven track record in B2B business development, sales, or account management, ideally within the recruitment or talent acquisition industry

Skills & Competencies

• Excellent communication, presentation, and negotiation skills.
• Ability to build and maintain long-term relationships with clients.
• Self-motivated, goal-oriented, and comfortable working independently.
• Strong analytical skills with the ability to identify business opportunities and effectively manage the sales pipeline.

Location: Novena

Working days/hours:

Mon - Fri Office Hours

Job Description:

- To conduct analysis to identify trends, patterns, and insights through healthcare data, to drive value-based care initiatives

- To collaborate with healthcare professionals to translate requirements into measurements and into insightful dashboards

- To partner key stakeholders to translate priorities and performance indicators into effective action plans

- To perform a periodic review of key performance indicators and to take pre-emptive action with relevant stakeholders

- To present routine reports and updates to stakeholders

- To support and facilitate the formulation of strategic workplan for Clinical transformation

- To do project management and align Clinical transformation’s work plans to that of MOH

Requirements:

- A bachelor’s degree from a recognized university.

- Proven track record of using Tableau for visualization and analysis, along with a strong understanding of data management and interpretation to drive impactful decision making

- Relevant experience in Project Management, Data Analytics and/or proficiency in programming language such as Python and/or R and visualization tools such as Tableau.

Interested candidates, kindly send a copy of your resume to: [email protected]

Jessica Fong Zhi Tong [R1879124]

Email Address: [email protected]

Recruit Express Pte Ltd

EA Licence No: 99C4599

Location: Redhill

Basic + Commission + VB

JD:

• Research market trends, competitor offerings, and emerging client needs within sectors like commercial office/Retail design & renovation
• Proactively seek out and generate new business leads through networking, events, industry associations, cold call and referrals.
• Draw up networking proposals customized to individual sector
• Liaison between client, designer and other parties leading up to the securing of project, while ensuring client’s requirements are met and exceeded
• Prepare sales and marketing materials
• Work on project pricing, contracts, and fee negotiations that balance profitability with competitive positioning.
• Achieve and Deliver Sales Target
• Support in all aspect of Sales activities
• Manage and maintain clientele relationship
• Collate and evaluate client feedback and highlighting client feedback from customers for management analysis and follow-up

Requirement

• Diploma in Marketing, Business, Interior Design, or a related field.
• Min 3 years of experience in Business development, preferably in the interior design on commercial office/retail.
• Strong communication and interpersonal skills, with an ability to understand design concepts & to liaise with individuals at all level
• Committed, sales target driven and self-motivated
• Responsible and team player.
• Creative mindset with a passion for interior design.
• Excellent networking & communication and negotiation skills, with the ability to liaise with individuals at all level
• Committed, sales target driven and self-motivated

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

Description:

• Client Acquisition: Identify, prospect, and secure new clients in the IT Services & Consulting space.

• Lead Generation: Develop and implement strategies to generate leads and build a robust sales pipeline.

• Sales Strategy: Design and execute strategic plans to achieve sales targets and expand the client base.

• Client Relationships: Build and maintain strong relationships with clients, understanding their needs and offering tailored solutions.

• Market Analysis: Research industry trends, market dynamics, and competitor activities to identify new business opportunities.

• Professional Services Expertise: Demonstrate a clear understanding of professional services, including staffing, project-based solutions, and managed services.

• Presentations and Proposals: Create and deliver compelling presentations and proposals to prospective clients.

• Collaboration: Work closely with internal teams, including delivery and technical teams, to ensure successful project implementation.

• Sales Reporting: Track, analyze, and report on sales metrics and progress against targets.

Requirements:

• Proven experience in sales or business development within the IT Services & Consulting industry

• Proven ability to acquire new clients and achieve sales targets in the APAC region.

• 5+years of experience in sales or business development within the IT sector.

• Strong knowledge of IT services and solutions.

• Proficient in drafting and reviewing MSA, SOW, and other contractual agreements.

• Strong understanding of the sales process and client relationship management.

• Proficient in MS Office Suite (Word, Excel, PowerPoint) and CRM software.

• Familiarity with recruitment processes and project staffing.

• Responsible for achieving assigned sales performance targets.
• Develop a merchant development plan in accordance with the company's overall strategy.
• Stay informed about market trends, actively and effectively explore new customers, expand business channels, and continually increase the market share of company services and products.
• Regularly report on business activities and collaborate closely with operational departments to make timely adjustments.

• Identify potential clients and business opportunities.
• Develop and maintain strong relationships with clients.
• Conduct market research to identify trends and customer needs.
• Create and present sales proposals and pitches.
• Negotiate and close deals with clients.
• Develop and execute strategies to achieve sales targets.
• Collaborate with internal teams to deliver customer solutions.
• Maintain accurate records of sales activities and results.
• Attend networking events and represent the company.
• Provide feedback to improve products or services.
• The role involves working in an English and Mandarin-speaking environment to facilitate effective communication with clients and team members.