• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Position: Marine NavCom Service Engineer/Radio Surveyor

As GMDSS Radio Surveyor, you will be performing accurate radio survey onboard the vessel as per IMO Regulation for all GMDSS radio equipment.

• After carrying out the radio survey with no error, you are responsible to issue the certificate and checklist to Class Surveyor and Master.
• Provide advice on GMDSS equipment for safety navigation and conform to IMO, SOLAS and non-SOLAS rules when applicable.
• Prepare survey report or spectral analysis or site scan when applicable.
• Timely renewal of Class accreditations, and get new Class approval when required.

As a Marine Navigation and Communication Service Engineer, you will be responsible for providing technical support and services related to marine navigation and communication systems.

• Install, configure, and troubleshoot marine navigation and communication equipment.
• Perform regular maintenance and repair works on navigation and communication systems.
• Conduct inspections and testing of equipment to ensure safety and quality compliance.
• Provide technical support and guidance to customers regarding system operation and functionality.
• Prepare and submit detailed service reports and documentation.
• Stay up-to-date with industry trends and changes in navigation and communication technology.
• Communicate with customers, vendors and all other stakeholders to complete the jobs.
• Understand and follow safety and quality procedures without fail.
• Serve as IT in-charge for the office premises.

Job Requirements:

• Completed an Electronics & Electrical engineering degree
• Possess a valid GOC or General Operators Certificate
• Minimum 2 years of experience as Radio Surveyor onboard the vessel
• Minimum 5 years of service experience troubleshooting ship navigation/communication equipment.
• Knowledgeable on all IMO regulations regarding Radio Survey requirements.
• Strong knowledge of various marine navigation systems, such as GPS, radar, AIS, and ECDIS
• Must be physically fit with excellent problem-solving and analytical skills.
• Good communication and organizational skills.
• Able to plan and work independently and in a team.
• Willing to travel and work onboard ships and other sites as required
• Woking hours: 44 hours, 5.5 days per week

Our client manufactures and designs innovative environmental instruments that drive sustainability.

• Provide service and spare parts quotations to customers enquiries.
• Performs in-house repair and on-site commissioning for various gas and water quality analyzer, CEMS and AQMS.
• Troubleshoot analyzer and advise customers on the best solutions in accordance with standard procedures and safety guidelines of the company.
• Create and maintain strong relationships with customers and provide good support.
• Support in Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) for projects.

Requirements:

• Degree in Mechanical/Electronics/Electrical Engineering or equivalent.
• At least 3 years working experience in the analytical instruments.
• Strong knowledge on gas analyzers, CEMS and water quality analyzer.
• Possess own transport, transport allowance will be provided.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

The role of the Engineer – Robotics & Automation is to design and develop various automation & robotics system to help increase the labor productivity of the GE MRO Shop and eliminate high labor content non-value work. The candidate will work in the Singapore Automation and Robotics Centre of Excellence.

Essential Responsibilities:

• Work with end-users and analyze user needs to develop concept, design, test, implementation, debug and commission customized semi and fully automatic machines to improve labor productivity, improve process efficiency, reduce quality defects, improve safety & overcoming repair technical challenges in fast-paced production shops.
• Develop new ideas and concept to enhance company’s performance and competitiveness in the field of industrial automation and robotics
• Perform prototype design, assembly, testing and troubleshooting.
• Support troubleshooting, investigation and implement improvement solutions of production process equipment, systems related to quality and safety issues
• Work closely with cross-functional teams and customers to develop work plan, deliverables, required resources, monitor project activities, budget, and timing for new initiatives
• Generate and outline project schedule to keep all stakeholders up-to-date promptly.
• Work with external vendors and system integrators to deliver Automated and Robotic equipment

Qualifications/ Requirements:

• Bachelor's or higher degree in Mechanical Engineering or related discipline
• At least 3years experience in mechanical design of customized automated systems.
• A track record of prototyping, delivering new and custom design automated equipment in production environment.
• Experience of customized automated machine design.
• Good knowledge experience using 3D modeling software such as Solidworks, Creo or NX
• Experience in mechanical drafting practices and a working knowledge of terms, rules, and applications of Geometric Dimensioning and Tolerancing (GD&T)
• Good understanding of material selections, machined part fabrication and processes
• Good and strong knowledge in designing and troubleshooting pneumatic circuit is a must.
• Must have strong knowledge in handling different phases of project management in Automation Equipment Design.
• Strong attention to detail with excellent analytical skills
• Prior experience in leading a team.
• Able to perform work under relatively stressful environment.
• Knowledge of industrial robots’ applications would be an advantage
• Experience in machine programming (control and/or vision) is a plus

Desired Characteristics:

• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

• Provide presales support by solving technical business solutions for the client.
• Responsible for product demonstration, proposal writing, creating compliance table, training and product enablement.
• Develop working proficiency and obtain certifications on assigned products and technologies.
• Conduct hands-on POC independently and present vendor’s solution to partners and end-users.

Requirements:

• Diploma in Computer Studies or equivalent
• At least 2 years of presales experience in IT network and Cybersecurity domain.
• Good knowledge of security and networking infrastructure environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description:

Test Planning and Strategy

• Lead the development of comprehensive test strategies and plans in collaboration with stakeholders.
• Define test objectives, criteria, and priorities based on software requirements and business goals.
• Ensure alignment of testing efforts with project timelines.

Test Execution

• Execute hands-on testing, including manual and automated testing, to verify software functionality, performance, and security.
• Conduct rigorous regression testing, exploratory testing, and user acceptance testing (UAT).
• Review and approve test cases and test scripts for accuracy and coverage.

Test Automation

• Develop and maintain automated test scripts using industry-standard tools and frameworks.
• Champion test automation best practices and contribute to the growth of automation coverage.
• Continuously improve the test automation infrastructure for efficiency and scalability.

Defect Management

• Establish and maintain a defect-tracking system.
• Ensure defects are documented, prioritized, and resolved in a timely manner.
• Communicate defects and testing progress to stakeholders.

Collaboration and Communication

• Collaborate closely with software developers, product managers, and other stakeholders to resolve issues and improve product quality.
• Communicate testing status, results, and recommendations to senior management.

Test Documentation

• Create and maintain test documentation, including test plans, test cases, and test reports.
• Ensure that testing documentation is up-to-date and accessible to the team.

Responsibilities:

• Proven experience as a Software Test Engineer, with a focus on automation and leadership.
• Strong knowledge of software testing methodologies, tools, and best practices.
• Proficiency in programming/scripting languages (e.g., Typescript, Svelte, Golang).
• Extensive experience with test automation tools and frameworks (e.g., Playwright, Testify, Selenium).
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.
• ISTQB or similar certification is a plus.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Role:

Production Engineer (Mechanical / Manufacturing)

• Singapore Based (Senoko, Sembawang area, company transport provided)
• 5 Days work per week (8am to 5.30pm)
• Salary: $3,500 - $4,500 + Allowance + AWS + VB
• Degree in Mechanical/Manufacturing Engineering or equivalent + 2 years with relevant experience is an added advantage.
• Knowledge on TS/IATF 16949, OHSAS18001, ISO14001, SPC, FMEA and TPM will be added advantage.
• Require putting on jumpsuit and protective mask as Personal Protective Equipment whenever it is necessary. + Willing to work overtime when needed
• Career Progression Opportunities

Responsibilities

• Responsible for production operation activities to ensure smooth and efficient manufacturing process.
• Liaise with cross functional department on effective corrective/preventive actions, including carry out improvement activities such as process optimization, benchmarking, etc through various statistical tools and software.
• Handle audit in accordance with TS/IATF & ISO and OHSAS requirements

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Laser Machine Service Engineer

• Office: (Bendemeer), most of the time at customers site (island-wide)
• 5 days Mon-Fri 830am-530pm,1 hour break
• $ 3,500 - $ 4,000

Job scopes and requirements:

• Install, troubleshoot, repair & service of laser machine.
• Carry out regular maintenance, repairing of equipment/machines and follow up on work orders, onsite-support equipment/machines installation
• Diploma in Electrical /Electronic or Engineering.
• 1-2 years working experience in Laser Application Equipment and Semiconductor Industrial, knowledge of electrical & mechatronics.
• Willing to travel island-wide

Apply now for Interview arrangement

Daniel Wong Reg No: R2095781

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Responsibilities:

1. Lead the Facility and Maintenance team as an area owner
2. Champion for plant machinery performance with overall OEE and TPM ownership.
3. Design, Review and Monitor machinery performance and meet machine performance based on its design capacity.
4. Work closely with the Production team to maximize machine utilization, cut down idle time, or shorten machine setup time and machine downtime.
5. Champion for lean machinery optimization to create value for production and increase the volume of output.
6. Engineering mindset to approach challenges in a systematic drawn from the problem statement, to use methods such as idea brainstorming to troubleshoot issues that arise.
7. Ensure plant machinery TPM and OEE are at optimal levels with tight control in preventive and predictive maintenance.
8. Plan, scheduled, and control machinery parts renewal, consumables, and tools optimization as well as a good organization system at the mechanical plant with the 5s and Kaizen approach.
9. Positive learning attitude, contributing to mechanical and machinery improvement program, able to read and understand P and ID, flow chart, work instructions, risks assessment, and equipment specification with good engineering knowledge and practices.
10. Able to troubleshoot, and ad-hoc problem-solving while being able to engage/liaise with external contractors to do critical jobs within the plant.
11. Manage facility and building management with contractor management support.
12. Report to operation management and render any service to the production sector to ensure production output and KPIs are met.

Job Requirements:

1. Degree holder and above.
2. Computer literate.
3. Able to use Microsoft Office.
4. Able to maintain and upkeep filing of documents and records.
5. Experience in Facilities and Maintenance.
6. Able to manage team members and external suppliers or contractors.
7. Cooperative, teamwork and willing to learn.

Main Responsibilities:

• Project management knowledge.
• Systems design, programing, equipment installation, testing and commissioning.
• Assist with any sales activities and pre-project work.
• Solving problem and trouble shooting.
• Maintain high level knowledge related to security systems, tech, and management.
• Client engagement and training.

Requirements:

• Minimum Diploma in Electronic, Computer, Automatization / Mechanical Engineering or equivalent.
• Previous related working experience is an advantage (Minimum 2 years’ experience)
• Basic IT knowledge in Hardware, Database and Network.
• Candidates have Project Management experience is an advantage.
• Familiar with CCTV and Alarm system products, Access Control and System is an advantage.
• Must be willing to work onsite.
• Past experience with Cisco, Tyco, Lenel and GE is a clear advantage.
• Good communication and coordination skills.
• Client service oriented.
• Fast learners.
• Good communication skills, fluent in English (Listening, oral, read and writing).

Key Roles and Responsibilities:

• Deliver technical solutions to clients and take responsibility for the standards of work, project sign off and client satisfaction.
• Provide client support, assisting with troubleshooting and design, configuration and escalated problem management.
• Act as key project team members charged with the analysis of client and technical requirements, specifications development, solution design and development, and in some environments may consult on testing and deployment processes.
• Expected to be technology leads for specific technologies and to use their deep knowledge of these technologies to propose enhancements.
• Interact with clients on site to meet complex requirements of a solution.
• Escalate unresolved problems and issues to the relevant third parties.
• Respond to escalated client requests and support client applications to a first line resolution.
• Escalate complex problems to the relevant third parties.
• Write reports and proposals and complete and maintain project documentation.
• Assist with the documentation of standard operating procedures relating to installations and fixes.
• Act as coach and mentor to more junior Implementation Engineers and Technicians.
• Assume responsibility for the co-ordination of the activities of the Engineers, in line with performance targets.
• May be required to serve periodically on the customer service desk, providing third line telephonic, remote and on-site support and problem management.
• Included in higher complexity design work, with input to the design expected.
• Expected to take ownership of relevant technologies according to domain or specialization.
• Knowledge, Skills, and Attributes:
• Good understanding and appreciation of technical design and business principles
• Demonstrates project management and administration ability.
• Good project skills which are demonstrated in the execution of installations and other assignments.
• Demonstrate customer engagement skills.
• Demonstrate relevant domain specialist knowledge.
• Good verbal communication skills
• Client focused and displayed a proactive approach to solving problems.
• Ability to work under pressure.
• Ability to coach, mentor and provide guidance to team members.
• Good understanding of project management principles

Academic Qualifications and Certifications:

• Computer Science / Information Technology Degree or equivalent together with specialized training in new technologies and legacy systems or equivalent
• CCNP (SDN, ACI, SDA, SD-WAN, DNAC), Meraki
• CCNP (Wireless, Meraki)
• ACMA, ACMP, ACCA, ACCP
• ACFE, ACSE
• JNCIA, JUNCIP-ENT, JCIA-MistAI
• CCSE, PCNSE, NSE4
• SolarWinds NPM, NCM
• CCIE – highly advantageous
• F5 Certified Technical Specialist (30X track) – highly advantageous
• Nokia GPON – highly advantageous
• Project management certification

Required Experience:

• At least 5 – 8 years' professional technical experience related to software development, systems design and deployment, or networking and infrastructure within a large scale (preferably multi- national) technology service environment.
• Experience in designing and building complex LAN and large WAN.
• Expertise in routing/switching technology, including BGP, OSPF, etc.
• Experience in designing and building complex data center network with Software Defined Networking (SDN) solutions such as SD-WAN, Cisco ACI, VMware NSX or any OpenFlow protocol.
• Experience in designing and building complex WLAN – Cisco/Meraki/ Aruba/ Alcatel/ Juniper Mist
• Extensive in Network Access Control – ISE/ Aruba ClearPass
• Extensive hands-on LAN switches: Cisco N9K, Alcatel Omni Switches, Juniper EX switches
• Extensive hands-on Wireless site survey; Post & Pre heatmap generation
• Experience in designing and building complex campus network with Software Defined Access (SDA) solutions from Cisco or any other SDA vendors.
• Experience in network automation via scripting (e.g., Python, Ruby) or tools (e.g. Ansible, Algosec, Chef)
• Experience in designing and building network security (Checkpoint, Palo Alto, FortiGate, Cisco firewall, IDS/IPS, VPN, SSL), Content Networking (cache, load balancer, F5, etc.)
• Experience in project management methodologies

About ACP:

ACP is the leading provider of learning management systems (LMS), e-learning, website development, and ICT solutions. In our current day and age, the adoption of technology in jobs worldwide has enabled us to streamline job processes and increase organisational efficiency, all thanks to the power of the internet. As such, digital literacy is a crucial skill that must be imparted to the next generation, and we continuously strive to empower every individual to learn through technology in our borderless world.

As a Quality Engineer, you have the opportunity to accelerate the delivery and to improve the quality of the software we build through recommending and implementing automated test suites.

Job Description:

• Work with the supporting vendors and government agencies to identify end-to-end test scenarios as well as to automate these test scenarios, applying risk-based strategy to minimize manual interventions.
• Conduct research on emerging technologies that can optimize and accelerate the project delivery.
• Ensure all required testing documentation are in place as part of production preparation checks.
• Drive and advocate continuous improvement in testing practices and tools.

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines
• Minimum 3 years' experience in application exploratory testing and regression test automation
• Understanding of Web-based project test methodology, test environments, bug life cycle, and frequent code release deployment QA support
• Create, review and/or support test automation strategies and implementations
• Experience working with highly trafficked, scalable Web applications
• Troubleshooting/debugging skills
• ISTQB, CSQA, CSTP or other relevant certification
• Experience with Katalon Recorder and/or Katalon Studio or equivalent
• Advanced knowledge of common desktop and mobile browser technology

RESIDENT ENGINEER - RE

(Civil & Structure)

LTA project

Overseeing construction projects, ensuring compliance with specifications, codes, and safety standards. Focus on supervising the technical aspects of the project, ensuring timely execution, and resolving any issues that may arise during construction

Responsibilities:

1. Project Supervision and Oversight: Act as the key on-site representative, ensuring that all civil and structural works are carried out in compliance with contract specifications, design drawings, and regulatory requirements.
   Oversee construction activities to ensure project schedules are adhered to, and work quality is maintained.
   
2. Coordination with Stakeholders: Liaise with the project management team, contractors, sub-contractors, and consultants to resolve issues related to design, construction methodology, or site conditions.
   Ensure clear communication between all parties to facilitate smooth project execution.
   
3. Quality Assurance & Control: Inspect and monitor construction activities to ensure adherence to design standards and quality benchmarks.
   Conduct quality control checks and verify that materials used meet project specifications.
   
4. Regulatory and Code Compliance: Ensure that all civil and structural works comply with local building regulations, safety standards, and codes.
   Prepare and submit necessary documentation to regulatory authorities, and ensure compliance with inspection and approval processes.
   
5. Technical Issue Resolution: Identify and resolve technical issues related to design, materials, and construction methodologies.
   Propose solutions to problems that may arise during construction without compromising on safety, quality, or project timelines.
   
6. Site Safety: Ensure adherence to all site safety protocols and statutory safety regulations.
   Conduct site safety inspections and enforce corrective actions when needed.
   
7. Documentation and Reporting: Maintain detailed records of all construction activities, site conditions, test results, and progress reports.
   Provide regular reports on project progress, quality control issues, and any non-conformance issues.
   

Key Activities:

1. Daily Site Supervision: Inspect the site daily to monitor progress, assess workmanship, and check material deliveries.
   Identify any potential delays or risks and take preemptive measures to mitigate these.
   
2. Review of Drawings and Specifications: Review construction drawings, specifications, and method statements to ensure they are up-to-date and reflect actual site conditions.
   Ensure any design changes are communicated clearly and implemented correctly on-site.
   
3. Coordination of Structural Tests and Inspections: Arrange for and oversee structural tests (e.g., soil tests, pile load tests) to confirm that materials and construction techniques meet required standards.
   Coordinate with independent inspectors for statutory inspections.
   
4. Contractor and Subcontractor Management: Oversee contractors and subcontractors to ensure their work aligns with project goals, standards, and timelines.
   Approve or reject works based on their quality and adherence to plans.
   
5. Problem-Solving and Issue Resolution: Proactively identify and resolve potential issues related to construction sequencing, materials, or structural integrity.
   Work with design engineers to adjust plans if necessary based on on-site conditions.
   
6. Regular Site Meetings: Attend regular site meetings to discuss project progress, resolve any issues, and ensure alignment with project timelines.
   
7. Final Inspections and Handover: Participate in the final inspections to ensure that the project meets all contractual and regulatory requirements before the handover to the client.
   Ensure all necessary certifications, as-built drawings, and warranties are in place for the final project handover.
   

Requirements:

Qualified & Recognized RE cert awarded by The Institution of Engineers, Singapore

Minimum three (3) years of relevant experience as a Resident Engineer with related project experiences.

Preferably road diversion, Infrastructure work, Linked bridge, and cycling pathway experiences

We seek a passionate research engineer to work on the development of novel ultrathin liquid metal oxides for applications in two-dimensional material heterostructure nano-electronics. This project aims to develop scalable techniques to create atomically smooth dielectric interfaces with 2D semiconductors to enable next-generation devices.

Job Description:

• Synthesize and characterize novel liquid metal based ultrathin 2D oxides.
• Fabricate, and measure electronic and quantum devices using 2D materials, such as field effect transistors, tunnelling transistors, and gate-defined quantum dots.
• Optimize and document fabrication recipes and material processing capabilities within the research group.
• Prototype, upgrade, and customize experimental setups.
• Ensuring experimental systems are serviceable through regular maintenance.
• Automate measurements and analyze data.
• Assist in filing technology disclosures and technical documentation.
• Assist in preparing manuscripts for publication.

Requirements:

• Bachelor's degree in mechanical engineering, chemical engineering, material science, applied physics/chemistry or related fields.
• Experience with gloveboxes and cleanrooms.
• Experience with deposition equipment such as atomic layer deposition and thermal evaporation.
• Experience with 2D material synthesis, processing, and stacking.
• Knowledge of basic programming languages such as Python.
• Strong team player.
• Resourceful in problem solving.
• Meticulous and analytical in experimental work.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Job Summary:

• Salary up to $4,300!
• Mon – Fri; 8:30am – 5:30pm
• Location: Tuas
• AWS
• VB
• Transport Allowance

Job Responsibilities:

• Maintaining customer accounts.
• Reviewing and preparing sales quotations.
• Providing regular updates on project development.
• Coordinating sales between factory and overseas offices.
• Liaising with customers on technical specifications.
• Supporting team in preparing marketing, sales, and presentation materials.
• Assist in Supply Chain Role: Ordering Pipes & Raw Materials and cost controlling.
• Any other adhoc duties as required

Additional Information:

• Minimum Diploma in Mechanical Engineering, Petroleum or any engineering related course
• Prior experience in the Oil & Gas equipment Manufacturing Environment preferred
• Experience in Solid Works, Inventor or Pro-E and able to read technical drawings in a MUST

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Ong Xinyu Charmaine
Registration Number: R24122875
EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

Skills and experiences required

• Degree in Building Services Engineering or its equivalent
• Proficient in use of application software such as AutoCAD 2D and 3D, M.S. Office, Primavera, etc
• At least 5 years of Design and Construction experience in related field or multi discipline-oriented construction firm.
• A good knowledge in Layout and Foundation design for process plants and equipment, fabrication techniques (e.g. welding, cutting and assembly) and standard components (e.g. bearings, motors and power transmission)
• Knowledge on local code of practices, and international standards and specifications
• Possesses intermediate knowledge of applicable codes, and implications on design
• Proficient in electronic mark-up software, MS Office, MS Project, Sketchup, AutoCAD and other relevant 3D software
• Ability to work well in a high volume, fast-paced environment as a member of a collaborative team
• Able to communicate effectively to meet our client’s requirements
• Good written and spoken English, proficiency in Chinese will be an added advantage (to liaise with our Chinese speaking counterparts)

Duties & Responsibilities

• To handle all design-related tasks and the technical improvement process
• To review and advice on existing (in-house or from external) design documentation.
• To provide technical support to project teams during the construction phase of the project
• To ensure conformance to design and equipment specifications, and that they are in compliance with operational and safety standards
• To be able to communicate effectively with our clients

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Solar Energy Research Institute of Singapore (SERIS) is looking for suitable candidate(s) to fill in Research Engineer position(s).

• The applicant will coordinate and/or attend site inspections related to Solar PV installation works and prepare a periodic report of findings for submission to Client.
• The applicant will assist in the Testing and Commissioning activities for Solar PV installations.
• The applicant will act as SERIS technical representative between Client and their appointed Solar PV Contractor. Attend and participate in meetings when required.
• Define the client specification into either a departmental action or subcontractor order. Produce deliverables on-time to client’s requirements, clarifying these requirements where necessary.
• Help manage and track the teams’ equipment and tools to ensure task carry out are to the required quality and standard. Liaise with suppliers when necessary.
• The applicant will assist in Lender’s Technical Advisory and assist in Owner’s Engineering projects, both of which include client interfacing, documentary and contract reviews, compliance
  check, site inspections and supervision on behalf of clients, and report writing.
• The applicant will have project management and leadership responsibilities.
• The applicant will assist in other group activities where required by the direct supervisor and group head.

Requirements

• At least a Diploma in Engineering (Civil, Mechanical or Electrical)
• Bachelor’s degree in Engineering is preferred, though proven working experiences in coordinating and/or managing Solar PV installation can offset this.
• At least 3 years’ experience in coordinating and/or supervising Solar PV installation or at least 2 years’ experience in a project management role in the PV, consultancy, or construction industry.
• Knowledge of PV systems O&M will be advantage. Internship in related field highly desired.
• Experience in other forms of electrical engineering works will also be considered.
• Comfortable to work in an outdoor and rooftop environment. Having “Work at Height” certification or equivalent is an advantage.
• Demonstrates initiative on moderate problem solving within assigned tasks.
• A dynamic team-player with a positive effect on the mood in an on-site group setting.
• Resilient, optimistic and open to change. Shows moral courage, openness and honesty in all dealings
• Proficient with Microsoft Office, especially Excel skills and able to analyses data or related a programming language.

Do you want to be part of creating a safer world? Without thinking about it, you meet us in your everyday life – at home, in transit and at work. We are at the airport, where you commute, where you work, play and shop. Diverse in our offering, our customer outreach and in our mindset, Gunnebo is leading the transformation of the security business through digitalization and connectivity for the continuous development of smart entrance control and safe storage solutions.

If you are passionate about being part of an exciting transformation journey working with a global, multi-cultural and highly motivated organization this is the opportunity for you.  Gunnebo is small enough to see your ideas come true, and big enough to realize your career goals.

About The Role

The Airport projects department of Gunnebo Entrance Control requires a Project Engineer to support its expansion in the Airport passenger processing solutions.

The candidate will oversee delivering of Airport projects globally.

They will work closely with Multiple Stakeholders, in ternal and external, in a successful delivery of projects, on time, within budget and with required quality.

The Projects they will be involved with will be in different time zones and local teams from many different cultures. The Project Engineer will also be required to support some large installation worldwide.

There will also be global travel required for this role dependent on requirements.

What You Will Do

· Work with internal Airport team (Project managers, Bid managers and Product managers) to provide technical, remote or on-site support for installation and commissioning.

· Work with internal Stakeholders such as Engineering Team, Operational teams, Global tech support teams, Spare parts teams and regional Support teams to deliver retrofit projects.

· Enhance Gunnebo documentation for Mass Transit products including and not limited to: Installation documents / O&M / Process Improvement and share all feedback with stakeholders to improve process.

· Assist on installing and testing the products during tradeshow.

· Assist with prototypes, and testing procedures.

· Drive the end to end Training for products: internal and external training

Who we are looking for

Essential

-       Ability to work within a remote multinational team

-       Being a team player with result focused approach

-       Experience in a B to B business model

-       Strong communication skills and adaptability to situations

-       Experience in working in large and complex projects environment involving integration of Hardware in IT environment.

-       Capacity to design optimal solutions taking into account ROI and limitations of each party + risk assessment.

-       Highly Structured and organized.

-       Multi-tasking and ability to work under customer pressure.

-       English fluent

Desirable

-       Previous experience in project management of integration projects within Mass Transit Environment (Airports, Metro, Intelligent Transportation, Fare Collection…)

-       Issue resolution

-       Other speaking languages

Why join us

Are you passionate about sustainability, innovation, safety, and collaboration? Our employees have ideas on how to build a safer and more sustainable tomorrow and the drive and passion to realize them. Our attention to societal trends, and our ability to translate these into business opportunities, alongside our dedication to customers, sustainability and digitalization have earned us a place among the leading companies in our industry.

We believe that building long-term relationships and integrity are keys to success. Performance driven by a forward-thinking attitude, passionate teamwork, and the strong will to continuously learn. If that describes you, we will gladly make way for your ambitions. From day one we support you with your personal growth, through challenging positions and comprehensive learning and development opportunities, in a dynamic, international and diverse and pro-active working environment.  Gunnebo is small enough to see your ideas come true, and big enough to realize your career goals.

At Gunnebo, we have a bigger mission, we are working For a Safer World. Welcome with your application.

About Gunnebo Group

The Gunnebo Group is a global leader in security offering innovative products and services to protect and control the flow of people, and to safely secure valuables. Through our businesses Gunnebo Entrance Control and Gunnebo Safe Storage we offer solutions to customers in retail, public transport, public and commercial buildings, industrial and high-risk sites and banking. We operate worldwide through our 3,400 employees, 25 country locations and 10 production facilities to serve customers in over 100 markets. Together we create a safer world.

Gunnebo Entrance Control specializes in access control solutions enabling customers increased efficiency, safety and end-user experience. Our wide range of products are designed to create a safe environment without restricting freedom of movement, whether it is to enter the lobby of a company, a store, an entertainment area, an industrial area and public transport. We shape the future of people flow management.

Gunnebo Entrance Control is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our products so unique. We welcome applications from all backgrounds and employment decisions are made without regard to race, colour, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other any other dimension of diversity.

1. Lead the Facility and Maintenance team as an area owner
2. Champion for plant machinery performance with overall OEE and TPM ownership.
3. Design, Review and Monitor machinery performance and meet machine performance based on its design capacity.
4. Work closely with the Production team to maximize machine utilization, cut down idle time, or shorten machine setup time and machine downtime.
5. Champion for lean machinery optimization to create value for production and increase the volume of output.
6. Engineering mindset to approach challenges in a systematic drawn from the problem statement, to use methods such as idea brainstorming to troubleshoot issues that arise.
7. Ensure plant machinery TPM and OEE are at optimal levels with tight control in preventive and predictive maintenance.
8. Plan, scheduled, and control machinery parts renewal, consumables, and tools optimization as well as a good organization system at the mechanical plant with the 5s and Kaizen approach.
9. Positive learning attitude, contributing to mechanical and machinery improvement program, able to read and understand P and ID, flow chart, work instructions, risks assessment, and equipment specification with good engineering knowledge and practices.
10. Able to troubleshoot, and ad-hoc problem-solving while being able to engage/liaise with external contractors to do critical jobs within the plant.
11. Manage facility and building management with contractor management support.
12. Report to operation management and render any service to the production sector to ensure production output and KPIs are met.

Job Requirements:

1. Minimum degree or equivalent.
2. IT savvy.
3. Proficient in Microsoft Office.
4. Able to maintain and upkeep filing of documents and records.
5. Experience in Facilities and Maintenance.
6. Able to manage team members and external suppliers or contractors.
7. Cooperative, teamwork and willing to learn.

• Plan sales activities with retailers to meet or exceed sales target.
• Checking & improving the product display quality for both Aircon & Air Purifiers.
• Manage inventory of demo units & marketing assets.
• Zone for both Aircon & Air Purifiers.
• Regular reporting on in-store related matters.
• Generate Sales and maintain growth for company for both Aircon & Air Purifiers.
• Weekly Sell-in & Sell-out sales management for both Aircon & Air Purifiers.

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

Major works scope as following:

· Setting up company’s technical standardization system, documentation filing

system, technical library, technical document & drawing template etc., share to

project team when new project awarded.

· Organize to provide technical support during tender stage & coordinate with

internal/external parties.

· Organize to brief the technical planning to project team upon new project award.

Early involvement for technical planning and implementation during

preconstruction stage to optimize cost & time.

· Assist project to review on shop drawing/method statement/material submission

scheduling, monitor the quality & schedule of technical documents submission if

necessary.

· Regular site visit & assist project team on solving critical technical issues if

necessary, such as major construction method/technology, ERSS, VE & Innovation

etc.

· Review technical deviation which submitted by individual project & provide

technical advice.

· Organize project technical audit & feedback comments to project team.

· Organize internal technical meeting & technical training/sharing.

· Organize project team to work out the report which highlight common good

practice and problem solving to share with relevant staff.

· Involve technical staff recruitment interview & provide training to new technical

staff.

· Evaluate technical staff performance & feedback to admin department if

necessary.

Job Description

• Responsible for managing a team of Architectural coordinators and BIM Modellers in the design and coordination works;
• Attend technical and site meetings with consultants;
• Study Architectural drawings and coordinate Architectural works with the consultants and sub-contractors to resolve any technical / site issues;
• Architectural planning, coordination with consultants and document control such as monitoring of sample submission, approval status of drawing
• Coordinating, organizing and preparing construction and architectural documents and drawing
• Ensure Architectural works are carried out according to specifications / drawings;
• Inform Project Director / Project Manager on any technical / site problems pertaining to Architectural works;
• Supervise the progress of Architectural works on site;
• Coordination of sub-contractor's Architectural work and ensuring the work is on schedule.

Requirements

• Degree in Architecture/Building
• 5-8 years’ of working experiences in main contractor companies preferably in large scale commercial projects
• Highly motivated and independent with excellent team spirit and communication skills Excellent written and verbal communication skills
• Understand in Autocad/ BIM/ construction drawing/ architectural drawings

Job Description

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades eg M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural/Civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements

• Degree in Civil/Structural Engineering / Building
• 3-5 years architectural and structural coordinator experience in building construction Project
• Good knowledge of Structural specifications & requirements
• Preference will be given to those who can commence immediately

Responsibilities:

• Attend technical meeting/site meetings with consultants, and provide technical solutions
• Study drawings and coordinate architectural works with the consultants and sub-contractors to resolve any technical / site issues
• Ensure architectural works are carried out according to specifications / drawings
• Inform Project Director / Project Manager on any technical / site problems pertaining to architectural works
• Supervise the progress of architectural works on site
• Coordination of sub-contractor's architectural work and ensuring the work is on schedule

Requirements:

• Minimum Diploma in Civil Engineering / Architect or equivalent
• 2 years relevant working experience in Architectural coordination
• Excellent written and verbal communication skills