Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Job Duties

• Under broad direction, identifies user requirements and assists with the design, development and documentation of supply chain business processes.
• Assists in the development of user training and works with users to ensure that processes are correctly followed.
• Communicates with supply chain business units to ensure business needs are met.
• Is an advocate to the business unit and user community.
• Coodinates and conducts user training.
• Assists in supervising others. Provides basic job training and guidance on a regular basis; performs work of same or closely allied nature.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.

Requirement

Skills are typically acquired through completion of an undergraduate degree in a Technical, Supply Chain, or Business related field and 4-10 years of experience in a supply chain related field. Should have direct experience in and extensive knowledge of supply chain business processes and process management techniques.

Responsibilities:

• Develop and design engineering plans and construction documents for projects.
• Conduct site inspections and assessments to ensure project feasibility and adherence to regulatory standards.
• Perform calculations to assess structural integrity, safety, and sustainability.
• Manage project timelines, budgets, and resources, collaborating with contractors and local authorities.
• Oversee and provide guidance during the construction phase to ensure quality and compliance with designs and plans.
• Monitor environmental impact and ensure all designs are sustainable and eco-friendly.
• Update project records and ensure that all documentation is accurate and up to date.

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

Job Description & Requirements

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams,

As a Senior Backend Engineer specializing, you will be responsible for designing, developing, and maintaining backend systems that support the integration and optimization of AI models & LLM in trading applications. You will work closely with the AI engineering team to integrate various machine learning models and algorithms into the backend systems to address business needs, ensuring high availability and low latency.

Key Responsibilities:

• Design, develop, and maintain backend systems and services that support AI models, ensuring high availability and low latency
• Integrate machine learning models and algorithms into backend systems for recommendation systems, predictive analytics, and other business applications
• Collaborate with frontend engineer, AI engineer and other stakeholders to identify business problems and design backend solutions
• Develop efficient APIs, ensuring high standards of performance, reliability, and security
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Document system design and API specifications to foster collaboration and transparency

Qualification & Skills:

• 4+ years of professional experience as Backend Engineer
• Proficiency in Python/ Typescript
• Strong understanding of database systems, including both SQL and NoSQL, and web development frameworks
• Solid experience in complex system design or architecture building.
• Familiarity with API design principles and best practices.
• Familiarity with caching mechanisms and cache invalidation strategies.
• Experience with cloud infrastructure, preferably AWS or GCP.
• Strong problem-solving, communication, and interpersonal skills.
• Passionate about AI/ML, with a keen interest in LLM technology.

We offer a competitive salary that is commensurate with the experience of the successful candidate

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 5+ years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications.

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements:

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field
• 8 years of experience in software development, with a focus on backend .NET C# and frontend Angular
• Proficient in designing and implementing maintainable, scalable, and secure software architectures
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes)
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure
• Understanding of DevOps practices, including CI/CD pipelines
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software
• Familiarity with industrial IoT and edge computing in manufacturing environments
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi disciplinary team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Controls COE is Looking for You

Halliburton invites qualified candidates to apply for a position with the Advanced Controls Center of Excellence (COE) in Singapore. Candidates with interests and background in control systems theory, robotics, mechatronics, dynamic modeling, or data analytics and machine learning are encouraged to apply. This position provides an opportunity to participate in a strategic research and development program shaping the industry’s future technology. By solving challenging technical problems you can have a rapid impact on a commercial market with significant revenue. Successful candidates are expected to perform original and relevant research and development to expand the group’s expertise and technology portfolio. The Advanced Controls COE at Halliburton encourages a culture of continued learning, inventing, and innovating by bringing together a diverse group of top-notch engineers and researchers. The group has a track record of developing advanced control and smart systems that are used to produce value around the world every day. Our goal is to continuously grow the group’s core research expertise in the area of control, robotics, dynamic modeling, filtering, data analytics, and machine learning to build advanced automation and control technologies and maximize the value of data to ensure the long-term success of Halliburton.

Responsibilities

• Conducting research and development in modeling, control, and data analytics for solving challenging problems in the oil & gas industry
• Contributing to the identification of high value problems and opportunities
• Participating in control system design, control system prototyping, and implementation
• Design smart systems to augment complex tasks
• Collaborating with team members and providing necessary support for technology transfer
• Publishing results in patent applications, technical journals, and conferences

Required Education and Skills

• A PhD (or equivalent experience) from Mechanical Engineering, Aerospace Engineering, Computer Science, Chemical Engineering, or Electrical Engineering with a focus on Control Theory and Applications, Robotics, Mechatronics, Machine Learning, or Data Analytics.
• Skills typically acquired through the completion of an undergraduate degree in Science, Engineering or similar discipline, and 2 years of related experience. Completion of a masters or PHD in Science or Engineering is preferred
• Experience and strong interest in solving practical problems, from invention to implementation in the field
• An excellent publication and patent record consistent with experience.
• Extensive knowledge in control theory, such as modern control, adaptive control, robust control, nonlinear control, optimal control, Model Predictive Control, etc., with outstanding ability to identify the proper control method for solving practical control problems and, when necessary, to develop new control methods, and/or
• Extensive knowledge and practical experience in the application of Data Analytics including machine learning techniques such as SVM, Neuro Network, Bayes network, Genetic Algorithms, etc., preferably with control applications, and/or
• Knowledge of robotic systems with high DoF control, path planning, mechatronics, or dynamic modeling of complex systems
• Demonstrated teamwork, strong communication skills, and collaborative in complex engineering projects

Preferred Experiences

• Worked with large data sets, unstructured data, structured data and supporting compute/cloud systems like Microsoft Azure
• Built tools/workflows and support structures needed to analyze data, perform data cleaning, execute feature detection and extract business value from data
• Developed models, control algorithms, workflows, & software for use in field operations.
• Leveraged data visualization software applications, such as R, Power BI, Spotfire or Tableau

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher-level roles give (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available

Roles & Responsibilities

• Prepare final reports for Incoming, In-process and outgoing processes.
• Compile and ensure timely submission of Manufacturing Record Book (MRB).
• Verify external provider's documented information (Incoming or secondary processes).
• Investigate and prepare non-conformance reports.
• Implement and verify corrective actions and ensure compliance with requirements.
• Present NCR findings to Management and customer.
• Liaise with customers on Notification of Inspection schedule and Pre-production meeting.
• Conduct internal training and process improvement plan.
• Involve in quality audits (Internal or External).
• Assist QA Manager on all issues.
• Any ad-hoc tasks which may be assigned.

Requirements

• Diploma or Degree in Engineering. Preferably Mechanical.
• 3 years of working experience in oil and gas industry.
• Familiar with international codes and standards (ASME/ASTM/API).
• Understanding and interpretation of drawing.
• Knowledge in Welding, NDE, CMM and manual inspection will be added advantage.
• Fresh graduates are welcome to apply. Training will be provided.

• Designing and developing electrical systems for marine vessels
• ⁠Installing and commissioning electrical systems on ships
• Supervising the work of marine engine technicians
• Inspecting and testing electrical systems and equipment
• Maintaining and repairing electrical systems and equipment
• Designing tray routes and electrical panel positions
• Creating single-line diagrams of lighting and other electrical panels
• ⁠Supervising the installation, cabling, and termination of electrical equipment
• Independently testing and commissioning electrical panels
• ⁠Loading testing D.G. sets
• Presenting surveys of electrical systems to relevant authorities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Oversee and mentor staff and liaise with a variety of Clients
• Handle over the resulting structures and services for use
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

· Coordinate with precast supplier on technical details assistance.

· Checking & submitting shop drawings to QPS/LTA for approval..

· Preparing MSRA for all work activity to be done at site.

· Monitor, planning & supervise setting up of precast storage yard.

· Monitor & supervise erection of gantry cranes at precast yard.

· Preparing the schedule for production based on site's delivery requirement.

· Checking & maintaining quality of PC production.

· Planning and scheduling of site works for PC installation.

· Monitoring storage space for precast deliveries.

· Checking quality of delivered products before installation

· Directed all necessary day to day Site activities.

· Monitoring work progress.

· Administration of all site works.

· Quality analysis and control of works.

.

Job Responsibilities

• Sales and marketing of valves (Own and well known brand in the industry)Able to secure & generate sales of valves & Actuators to achieve company order targets
• Aggressive PIC for Sales Division who can develop new business(sales) from scratch & be able to conclude orders.
• Establish relationship with End Users, Contractor (Industrial Market, main Market is semiconductor, & petrochemical related) who use valves, gathering market information and expand sales
• Market survey of new business field and reporting
• Work closely and liaise with related divisions such as Sales Team, Warehouse, Engineering, Factories, Japan head office
• Properly understand the needs from customers and follow upongoing project
• Person in charge to communicate with customers if a claim occurs, and liaise with related divisions to solve the problem
• A highly dedicated, responsible & passionate person who can perform task accurately & promptly, and able to work under pressure by taking challenge.
• Ad-hoc duties by MD or GM.

Requirements

• Minimum 2 years’ experience related valves, actuators & similar industry in sales including planning sales approach
• Proactive attitude to analyze the current situation and change to better way
• Depending on the performance, this position could be the future Senior Manager
• Proactive attitude to hit the target and logical way of thinking, and to develop new business and sales channel
• Confident in communication
• General Skill in Excel, Word and Power Point
• Team Player
• Ownership
• Decisive, drive and ability to deliver effective, innovative solutions
• A person who has positive and can think and act for himself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication andinterpersonal skills at all levels
• Some understanding of Japanese is a plus.

Reporting Function

• Directly report to Sales General Manager

Roles & Responsibilities

Job Description

• Industry/ Organization Type: Marine Shipbuilding and repairs
• Position Title: Mechanical Engineer
• Working Location: Jurong West
• Working Hours: 6 days (Monday to Friday (8 AM - 6 PM) Sat 9am -1230pm
• Salary Package: Basic Salary up to $8,500 + OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Focus on equipment repairs, hands-on assembly, testing, troubleshooting, and supporting projects related to Scrubber systems and valves
• Assess the client's needs to understand design requirements.
• Use CAD software to create design drafts (such as P&ID and GA drawings).
• List necessary materials, compare with current stock, and manage inventory reports for project implementation.
• Keep track of the project's progress to ensure it aligns with the planned timeline.
• Test, diagnose issues with, and fix equipment or products manually.
• Manage the submission of documents to clients.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or a relevant advanced qualification.
• Minimum 1-2 years of mechanical engineering experience in the marine/mechanical industry.
• Skilled in using AutoCAD for drafting and competent with Microsoft Office.
• Hands-on technical skills are an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at) [email protected] Kindly indicate #me on the email subject.

Zantra Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

• Able to plan/coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at the site and recommend solutions to relevant teams/departments.
• Review Architectural drawings for conflicts with Structural/M&E and liaise with consultants to resolve issues.
• Ensure all work is carried out within the schedule and maintain the required quality.
• Ensure a safe work environment at the work site and manage workers.
• Assist the Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submitting and monitoring technical drawings, method of statements, and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

Job description

• Proactively engaging with customers on service sales and technical inquiries to support the sales team in meeting sales growth objectives and nurturing positive client relationships.
• Provides technical support during site installation, troubleshooting and testing & commissioning.
• Deliver in-house (phone/email) and on-site service support, as well as conduct demonstrations for potential customers.
• Provides technical support throughout site installation, troubleshooting, testing, and commissioning, including diagnosing issues, providing quotations, and processing purchase orders.
• Source and fabricate troubleshooting tools, as well as manage the ordering process to ensure spare parts availability and reordering when necessary.
• Prepare documentation for repair cases as required and assist with payment issues related to repair orders.
• Enhance service revenue and expedite repair process turnaround time (TAT), while also managing warranty claims for both local and overseas customers.
• Keep the repair/workshop area tidy and orderly, ensuring that demo equipment remains in operational condition.
• Perform any other duties as assigned from time to time.

Requirements :

• Minimum a Higher NITEC qualifications.
• Preferably with at least 3 years of commercial experience in the Electrical/ Electronic industry. Fresh graduates are welcome too.
• Good understanding of Standard Electrical Schematic Diagrams, and able to perform System, Hardware Testing & Troubleshooting.
• Knowledge and practical use of standard vacuum technology practices is an advantage.
• Service-minded with passion and patience for handling customers.

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems.
• Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• 5 days, Alexandra (South-West), walking distance from MRT
• $3200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• No experience can apply

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• 1 year of relevant experience as Process Engineer
• Candidate with no experience can apply as on-the-job training is provided
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

• 5 days, Alexandra (South-West), walking distance from MRT
• $4200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Suppor current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time
• studies

Interested applicants, please send your resume to [email protected]

About Us:

Metalcool Pte Ltd specializes in delivering high-precision tooling solutions, with a commitment to quality and technical expertise. We are looking for a detail-oriented Junior Tooling Engineer to support our engineering team with technical drawings, CNC programming, and tool inspection, ensuring that all customer requirements are met with precision and efficiency.

Job Scope:

Technical Drawing and Program Preparation -

• Generate product engineering drawings using CAD software, ensuring that specifications and customer requirements are met with high precision.
• Prepare CNC machine programs using specialized software (e.g., ToolStudio) to facilitate production, subject to verification and approval by a senior engineer.

Inspection of Incoming Tools for Regrinding -

• Inspect incoming customer tools for regrinding, verifying tool condition and identifying regrinding requirements in line with quality standards.

Work Order and Documentation Management -

• Prepare detailed production work orders in line with company standards, ensuring clear and organized documentation for all projects.
• Maintain organized records of all work orders, Standard Operating Procedures (SOPs), and Certificates of Compliance as per the company’s established filing framework.

Data Entry and Record Maintenance -

• Record production data accurately for performance tracking, ensuring accessible and well-organized records that support senior engineers in analysis and verification.

Quality Compliance -

• Submit all drawings and CNC programs for review, ensuring compliance with established procedures and accuracy standards before final approval.

Job Requirements:

Skills & Experience -

• Proven experience using CAD software; knowledge of SolidWorks is advantageous.
• Understanding of CNC programming concepts; familiarity with ToolStudio or similar software is beneficial.
• Detail-oriented with strong spatial and computational skills to produce precise technical drawings.
• Experience with tool inspection or quality control is a plus.

Educational Background:

Diploma in Mechanical Engineering, Manufacturing Engineering, or a related technical field.

Communication Skills:

Effective written and verbal communication in English (Mandarin proficiency is a plus).

Work Environment:

This role is based in a structured, process-driven industrial environment with a focus on technical precision and compliance. You’ll be working alongside a team of experienced engineers who will provide guidance and support as you gain hands-on experience.

Why Join Us?

Gain valuable experience in technical drafting, CNC programming, and quality inspection within a supportive environment, with potential for future advancement as you develop your expertise.

We are looking for Software Engineer who possesses a passion for pushing mobile technologies to the limits and will work with Creative’s engineers to design and build our mobile applications that will be the enabling software for Creative’s range of audio products. You will undertake development work on Android and iOS applications to support Creative’s audio products. You need to collaborate with cross-functional teams to define, design and ship new features and support new products. You have to unit-test code for robustness, including edge cases, usability and general reliability and robustness. You are required to adopt automated testing to improve productivity and software quality. You must work on bug fixing and improving application performance. You should continuously discover, evaluate and implement new technologies to maximize development efficiency.

Requirements:

• Degree in Computer Science / Computer Engineering or its equivalent.
• Strong programming foundation in object-oriented programming/design, Java, Swift, Android and iOS development.
• Experience with Agile software development methodologies such as Scrum and Kanban.
• Experience with Software testing methodologies such as unit testing, black box testing, white box testing etc.
• Experience with version control systems such as Subversion, Git.
• Experience with Wifi/Bluetooth interface, Internet and Cloud Computing and knowledge in Unix, Linux and Macintosh OS environment is an added advantage.

Job Scope

• Involved in planning and development of projects.
• Assist to develop mechanical and/or electrical engineering designs based on project requirements, from conceptual to schematic and detailed designs.
• Assist to design mechanical and electrical systems.
• Assist to conduct project assessments and is able to suggest feasible and creative solutions based on the assessment results.
• Support tendering process.
• Assist to plan the team's manpower and provides on-the-job guidance to junior staffs

Requirements

• Degree in Mechanical or Electrical Engineering or related fields
• Meticulous and highly detail-oriented.
• Has a keen interest to incorporate new technologies into engineering design projects.
• Excellent knowledge in mechanical and/or electrical engineering fields
• Good problem-solving skills.
• Good interpersonal and project coordination skills crucial for networking with internal and external stakeholders.
• Required to work both in office and at project sites.
• Applicants with good experiences will be considered for Senior positions

PLC/SCADA Project Engineer - European Engineering MNC

2 years contract

Salary: $5500 max

5 days work week

8am - 5pm

Location: Tuas

Job Scope:

• Reporting to lead engineer and project manager.
• Directly involves in the Technical meeting with customer, analyze customer inputs and understand the requirements, such as Technical Specification, IO list, etc.
• Raise Technical Queries and clarification to customer.
• Develop drawing/documentation as required for the project; and work together with lead engineer for document submission.
• Together with lead engineer to design and develop 800xA Object Library.
• Develop test plan and procedures.
• In the absence of lead engineer, able to take the leadership and ownership.