RESPONSIBILITIES:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

• Worked on multiple tapeouts on Netlist to GDSII

• Hierarchical partitioning and budgeting of block-level subsystems.

• Implementation of high performance (HP) cores, low power designs

• Node experience upto 7nm, 10nm, 14nm, 28nm.

• Timing Signoff in loop through STA and ECO cycle at block and at interface.

• Block level floor planning, power planning and IR drop analysis.

• Scan chain reordering / Scan Chain repartitioning

• CTS expertise and clock tree constraints creation for meeting specifications

• MMMC optimization at Block and Sub-System Level

• Timing closure with Crosstalk and AOCV / POCV

• TCL scripting to fundamentally understand tool usage.

MANDATORY EDA SKILLS

• PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

Bachelor / Master’s degree in electrical & Electronic Engineering with at least 3 years of relevant experience in leading successful CMOS IC Test development projects.

• Experience in Advantest 93K tester (should be familiar with SMT 7 & 8) or J750

• Smartest 7 or 8 hands-on experience.

• Multiple years of experience on the V93k platform/J750

• Responsible for preparing the Production Test packages (Hardware and Software), and

• Qualification Test programs

• Ensure Timely transfer of Engineering and Production test packages for Wafersort and Final

• (Packaged) Test to various test sites

• Support SoC Test/Test Program Integrators on day to day debug and analysis as required

• based on schedule Test Program Roadmap

• Support test program buyoff 1st line support as needed inclusive of troubleshooting and

• resolutions

• Strong 93k DC testing experience

• Knowledge on Programming concepts and C/C++, Python, Java/ VBA language – preferred

Job Description & Requirements

• Develop verification environment and tests to perform Functional (RTL) testing at IP level and SoC Level
• Develop IP level/SoC level test plans based on the design/architectural specs.
• Coverage Analysis and Coding
• Run simulations & regressions, debug test failures to identify test case issues & RTL design issues
• Define and develop block/full chip level verification environment and its components

Required Skills:

• 6 & above years of experience in ASIC Verification and Methodologies
• Good knowledge of System Verilog, SV-OVM/SV-UVM Methodologies
• Good understanding of RTL concepts
• Good understanding of AHB/AXI protocol
• Expertise in PCI-e/ USB/ Ethernet
• Need Experience on protocols MAC, FEC, and Serdes
• Knowledge of Perl/TCL is Must
• Good communication skil

Experience / Skills:

• Degree in Mechnical Engineering (or equivalent qualification) or have a proven track record in the delivery of design projects.
• Minimum 8-10 years of working experience, preferably in consulting environment, with minimum 3 years of working experience in detailed design, design with contractor and onsite experience.
• Relevant experience in mechanical/electrical building services engineering design, including areas such as specification writing, calculations.
• Have knowledge and understanding of engineering practices, techniques and procedures and interfaces with design team and client needs.
• Make reference to regulations, industry standards and good practice in engineering design.
• A track record of having worked on a variety of Building Services designs covering for example, Infrastructure, Education, Healthcare and Commercial projects.
• Experience of seeing conceptual designs through to completion and dealing directly with clients.
• Able to contribute to the fee proposal and determine resources.
• Able to assess staff requirements at each work stage, agreeing these with the Project Manager and be able to manage single disciplinary and multi-disciplinary projects.
• Worked in infrastructure projects, e.g. railway projects will be an added advantage
• Experience in BIM (Revit) will be an added advantage.
• A member of a professional Institution or close to achieving professional engineer status.

Role Responsibilities:

• Contribute to the fee proposal and determine resources.
• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.
• Conduct M&E services site survey
• Lead in the coordination with other disciplines in preparation of design deliveries
• Produce mechanical design from concept to detail design
• Assist Professional Engineer in liaison, preparation and follow up of Authority Submission.
• Work closely with Clients / Architects/ Structural Engineers / Quantity Surveyors, etc.
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Prepare outline scheme report/technical content of the design information
• Input to pre-qualification and selection of contractors, respond to tender queries, comment and review tender returns.
• Conduct presentations / workshops on techanical matters.
• Attend tender/client interviews.
• Attend site inspection meetings.
• Ensure the project work complies with the Project Management Plan and Programme.
• Ensure quality, sound and efficient engineering design service being reflected in every project deliverable.
• Conduct design check/review with junior engineers on every project handled.
• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.
• To work closely with junior engineers, provide necessary guidance, training and provide assistance on their technical / professional development at AECOM.

Responsibilities

• Responsible for equipment benchmarking, technical strategies, and technical roadmaps at Solar Cell manufacturing tools
• Provide technical expertise and recommend technical solutions to the development and design of equipment to maximize overall equipment effectiveness
• Harmonize and standardize manufacturing equipment and solutions across all sites worldwide
• Strong coordination and communication network with both local and overseas manufacturing sites
• Partner with suppliers and subcontractors on new equipment projects, commissioning, qualification, and installation, according to the planned schedule to add capacity on time
• Identifying and pursuing potential opportunities for hardware capability enhancement, and driving defect reduction

Requirements

• Relevant bachelor’s degree in Mechanical/ Electronic Engineering/ Automation Engineering and/or equivalent
• More than 4 years experience in Equipment Engineering
• A team player who can multitask and thrive in a dynamic and fast-paced environment
• Good experience in problem-solving techniques, methodologies, and project management are a plus
• Able to work in a clean room environment, gowning up in coveralls, hoods, boots, safety glasses, and gloves(PPEs). Spend significant amount of time on the factory floor working on the tools
• Proficient in Microsoft (PowerPoint/ Excel/ Word) & AutoCAD applications
• Oversea traveling may required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description & Requirements

1. Preparation of shop drawing

2. Preparation and submission of necessary document prior to start boring work

3. Supervise in confirmation of soil boring and rock caring. And submissio0n of pile length calculation (if required)

4. Co-ordination with main contractor and consultant’s representative.

5. Preparation and submission of bored pile installation record

6. Supervise and arrange the site team & progress thereafter report to project manager

7. Preparation of bored pile summary and submit to main contractor and HQ

8. Submission of as built pile penetration and eccentricity drawing

9. Receiving the time to time instruction of project manager

Bachelor / Master’s degree in electrical & Electronic Engineering with at least 4 years of relevant experience in leading successful CMOS IC Test development projects.

• Experience in Advantest 93K tester (should be familiar with SMT 7 & 8) or J750

• Smartest 7 or 8 hands-on experience.

• Multiple years of experience on the V93k platform/J750

• Responsible for preparing the Production Test packages (Hardware and Software), and

• Qualification Test programs

• Ensure Timely transfer of Engineering and Production test packages for Wafersort and Final

• (Packaged) Test to various test sites

• Support SoC Test/Test Program Integrators on day to day debug and analysis as required

• based on schedule Test Program Roadmap

• Support test program buyoff 1st line support as needed inclusive of troubleshooting and

• resolutions

• Strong 93k DC testing experience

• Knowledge on Programming concepts and C/C++, Python, Java/ VBA language – preferred

Responsibilities

· Responsible for the service management in the maintenance services

· Prepare and maintain project execution plans, and track all activities against the plan, providing regular and accurate reports to internal management and customer management

· Deliver quality outputs based on defined processes, review project performance and take timely corrective actions where necessary to ensure that project performance targets are achieved; identify and mitigate risks before they seriously impact the project delivery

· Monitor and control allocated manpower, associated revenue costs and all capital costs against the project budget

· Provide effective leadership to the project teams and ensuring that the team members are motivated, and developing their technical competencies and knowledge base

· Participate in client / partner contract negotiations and pre-sales solutioning support to sales team

· Manage a team and ensure SLA are fulfill

Requirements

· Degree in IT / Engineering, or diploma with years of experience equivalent

· At least 5 years of experience in managing large-scale system and engineering integration projects and cross-functional delivery teams

· Experience in turn-key development, implementation and maintenance of large-scale, multi-platform, multi-vendor systems in the IT and engineering domain

· Large-scale program management of multi-service line teams, including strong project management and communications skills, service delivery, client relations, planning, scheduling, budgeting, financial management, resource management, quality assurance and situational negotiations

· Proven track record in managing multi-million dollar projects in the government and/or commercial sectors

· Proven record of successful staff management in the area of leadership, staff motivation, performance appraisal, professional development and recruitment

· “Hands-on” attitude

· Good presentation skills, communication, negotiation, interpersonal skills and customer-service orientation

· Knowledge of Voice switching system will be a plus

· Professional project management certification (e.g.. PMP, ITIL, etc.) is preferred

· Preferably with Class 3 driving license

· Working location is in Ang Mo Kio

• This is a 2 years’ direct contract

· Singaporeans only

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Job Description & Requirements

• Design of electrical systems for infrastructure/ Water / building projects
• Conducting technical feasibility study, life cycle study and planning for all electrical systems
• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Evaluation of tenders and preparation of tender assessment reports.
• Assist Professional Engineer in liaison preparation and follow up of authority submission.

Requirements:

• Bachelor Degree in Electrical Engineering
• Minimum 5 years hands-on design experience in building and/or infrastructure projects
• Good project management and technical skills
• Familiar with local code and authority submission procedures
• Team player and able to work independent with minimal supervision
• Proficient in AutoCAD and BIM
• Good communication skills; ability to work well in a team

Job Description & Requirements

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

• Netlist to GDSII at block level, Subsystem Level and at Full chip.
• Worked on multiple tapeouts on Netlist to GDSII
• Hierarchical partitioning and budgeting of block-level subsystems.
• Implementation of high performance (HP) cores, low power designs
• Node experience upto 7nm, 10nm, 14nm, 28nm.
• Timing Signoff in loop through STA and ECO cycle at block and at interface.
• Block level floor planning, power planning and IR drop analysis.
• Scan chain reordering / Scan Chain repartitioning
• CTS expertise and clock tree constraints creation for meeting specifications
• MMMC optimization at Block and Sub-System Level
• Timing closure with Crosstalk and AOCV / POCV
• TCL scripting to fundamentally understand tool usage.

MANDATORY EDA SKILLS

• PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

Responsibilities:

• To perform all roles and responsibilities required of site supervisors under the Building Control Act
• Ensure that the M&E works are constructed in accordance with drawings and specifications and the Building Control Act and Regulations
• Monitor and report on the progress of works
• Carry out inspection of M&E engineering works prior to concreting, subsequent construction work and defects rectification works
• To carry out supervision and inspection of the works as directed by the Supervision QP, CRE,SRE, consultants or Superintending Officer
• To manage and supervise the Resident Technical Officer under his charge
• Ensure records of all mechanical and engineering works including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety, etc, are timely updated and properly kept
• Attending site, progress, variation and coordination meetings
• Verifying all reports and claims relating to M&E works submitted by the contractors
• Liaise with all relevant authorities and stakeholders to maintain proper and updated daily records of all works done including records of tests, inspections, status of work, safety, site diary, material on site and equipment on site, labour force, day works, provisional items or provisional quantities etc.
• Keeping accurate record of variations as instructed or approved by the Superintending Officer and to maintain a set of updated drawings on site
• Check all drawings (including shopdrawings, construction drawings and specifications for discrepancies and to report to the Supervision QP, consultants or Superintending Officer

Requirements:

• Minimum five (5) years of relevant experience as a mechanical and electrical engineer, of which at least three (3) years shall be in supervision of works similar in nature to major construction works in buildings, services laying and lighting & control systems.
• Degree/ Diploma in mechanical or electrical engineering degree recognised by the Professional Engineers Board of Singapore.
• Preferably with experience in the supervision of infra services laying, lighting & control systems.
• Contract Period: 1 year, subjected to extension depending on project requirement

Responsibilities/Job Scope:

• Pre-silicon verification and post-silicon system validation

• Test case and test automation scripts development and test plan execution

• Debug system (hardware, software and firmware), provide expert support to internal as well as external customer

• Silicon characterization and failure analysis

• Booting and other source code development

• Interoperability Testing (IOP), debugging and propose solutions

• Requires interfaces with Architecture, Design, and Pre-silicon Validation teams in improving post-silicon test content and providing feedback for future on-die debug features

Qualifications and Experience:

• Bachelor’s degree and above of computer science or electronic and electric engineering or embedded system

• Minimum three years’ experience of hardware, firmware development and system verification in consumer/electronics products

• Familiar with system board design/debugging and usage of lab equipment like Oscilloscope and Logic analyzer

• Experience of silicon verification and test plan execution

• Understand Ethernet GPHY, Ethernet Switch/PCI/USB/PCI-E/ /SGMII/SPI bus protocol

• Experience of C/C++ and Python Programming language

• Knowledge of physical layer components such ADC, DAC, AGC, DSP, filtering, line driver, differential signals

• System Debug tools JTAG, EJTAG. Knowledge of Spirent Test center and scripting

• Team player, very proactive and self-motivated

• To carry out instrumentation related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out instrumentation calculation for the design
• Responsible for reviewing of instrumentation documents and specification from clients and consultants
• To check and review all instrumentation related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim.

Job Description & Requirements

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Job Description

• This is a delivery cum support role, working on cloud (private and/or public) operations with the infrastructure delivery and support teams.
• You will execute daily operational activities as well as implementations in technical customer engagements including basic infrastructure operations and administration, specific implementation projects and/or proof-of-concepts in the infrastructure.
• The ideal candidate will have experience in delivery roles and successes in implementation discussions, hands-on experience with good client handling skills and good team player within the team.
• The candidate should also be able to provide solutions and technical expertise to fellow team members and in client accounts.

Responsibilities

• Apply technical knowledge, hands-on and customer insights to operate and administrate a cloud (private and/or public) infrastructure.
• Ensure all configurations conform to high levels of performance, security, scalability, maintainability, and appropriate reusability and reliability upon deployment, aligning to design documentation specifications.
• Ability to codify or implement/deploy configurations with the principles of automation by default in new projects with proper documentations will be advantageous.
• Ability to codify or maintain infrastructure systems in an automated fashion using tools such as but not limited to Ctrl-M, Ansible, Terraform etc with proper documentation will be advantageous
• Collaborate with team members to engage clients in operational meetings, discussions, process betterment and contribute to optimisations for the client’s environment.
• Maintain technical skills, certifications and knowledge of market trends and competitive insights; collaborate and share with the technical community specifically in the infrastructure.
• Ability to resolve issues with proper resolution/documentation technically and SLAs is required for this role.

Job Requirements:

• Job Role/Level: Engineer, Workload Automation Mgmt.
• Mandatory Skills (must-have): Control-M
• Preferred Skills: Troubleshooting, Problem and Change Management
• Work Location: Tanjong Pagar
• Contract Duration: 12 months
• Security clearance * Need to be cleared for the project (project clearance) before onboarding
• 24 * 7 standby: Yes
• Shiftwork: No
• Monthly Claims: Mobile: up to $ 50 per month (on reimbursement basis along with receipt/invoice subjected to project team’s approval)
• Transport: on reimbursement basis along with receipt/invoice subjected to project team’s approval
• Monthly Allowance: NA
• Bonus: 1 month of Performance Bonus
• Notice Period: 2 Months

Professional Experience

• At least 2 years of successes in operational/administration and deployment/migration infrastructure projects.
• Problem Solving. Ability to solve customer problems through technologies.
• Collaboration and Communication. Acknowledged helping to provide solutions to issues collaboratively, resolving conflicts and ensuring follow through with proper follow up and closure.

Technical Experience

• Strong technical experience with cloud infrastructures, migrations, and technology management preferred

1. Should be able to perform Control-M Administrative activities involving:

a. Agent on-boarding on Windows and Linux platform

b. Control-M Env Configuration – Windows Servers and MSSQL DB

c. Monitor Housekeeping jobs and Control-M Server resources.

d. Configure/Update authorization profile (RBAC)

e. Configure/Update Calanders, Workload policies, Site standards.

f. Support maintenance activities like OS patching and DR activity

g. Troubleshooting issues and provide RCA, involve vendor if required.

2. Should have good knowledge on Control-M Application HA and DR setup.

3. Will be responsible to perform job configuration inline to site-standards and naming convention.

4. Provide consultation to application team to address there scheduling requirements.

5. Should be well worse with change life cycle and Jira.

6. Should provide inputs to documentation like – TDS, OPS Guid etc.

7. Mitigate security risk highlighted by VA scan.

8. Conduct KT session for customer

9. Should have good knowledge of Linux and windows platform

Certifications

BMC Ctrl-M Certified Associate, BMC Ctrl-M Certified Fundamentals, BMC Ctrl-M Certified Professional

Vmware Certified Technical Associate and/or VMware Certified Professional will be desirable.

Job Type: Contract

Salary: Up to $12,500.00 per month

Work Location: Tanjong Pagar (In person)

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

• To carry out electrIcal related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out electrical calculation for the design
• Responsible for reviewing of electrical documents and specification from clients and consultants
• To check and review all electrical related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim

Job Description:

As a Software Engineer at our company, you will play a crucial role in designing, improving, and implementing software solutions for our high-tech products in the semiconductor manufacturing industry. You will collaborate closely with the software manager and other members of the Scrum team, taking ownership of assigned software development tasks. Your responsibilities will include writing, debugging, and maintaining source code, as well as conducting unit tests to ensure the robustness of the developed software.

Key Responsibilities:

· Design and enhance software architecture.

· Execute assigned software application development tasks.

· Report to the software manager and collaborate closely with other software engineers in the Scrum team.

· Take responsibility for writing, debugging, and maintaining source code and conducting unit tests.

· Demonstrate developed features to the company team and product managers, collecting feedback for continuous improvement.

· Provide customer support and on-site debugging as needed.

Requirements:

· Bachelor's, Master's, or Ph.D. degree in Computer Science, Computer Engineering, Electronics, Automation, or related technical fields from a reputable university.

· 5 years of programming experience in C#, .Net/WPF, and C++ on the Windows platform.

· 5 years of professional design and development experience in object-oriented design patterns for scalable, high-performance large software applications.

· 5 years of experience with commercial system software and hardware integration in a production environment.

· Familiarity with open source or popular commercial image processing libraries.

· Experience in factory automation and MES development.

· Prior experience in CUDA-based GPU programming is a plus.

· Experience with detection and measurement devices is a plus.

· Prior experience working in Scrum agile development teams is preferred.

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

1. INTERFACE MANAGER

Job Description:

• Responsible for design, implementation, testing and commissioning of Large-Scale, Rail Transportation projects for Supervisory Control & Data Acquisition (SCADA) System
• Manage a team of interface engineers and coordinate with interfacing contractors and stakeholders to firm up the interface design including getting the interface design and interface documents accepted by the client.
• Participate in interface meetings and interface testing on site with the interfacing parties.

Job Requirement:

• Diploma/Degree in Electrical, Electronics or Computer Engineering
• Excellent working knowledge of SCADA software package on UNIX and Windows platforms
• 3 – 5 years’ working experience in the design and implementation of Real Time Control System in a project environment
• Experience with various types of interfaces and protocol
• Ability to participate in multiple projects and work under pressure
• Pro-active, resourceful and able to work with various stakeholders
• Team player and independent

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for
- Current remuneration
- Expected remuneration
- Notice period

John Goh Meng Chye

EA License No : 06C4642
EA Reg No : R1102621

• Managing the planning and design stages of construction projects.

• Contributing technical expertise to project drawings and designs.

• Performing cost calculations and preparing financial projections.

• Preparing work schedules in collaboration with the project manager.

• Liaising between contractors, subcontractors, vendors, and suppliers.

• Overseeing construction engineering processes.

• Performing regular tests on materials and procedures to ensure compliance with industry regulations.

• Ensuring that the construction project is completed on time and within budget.

• Documenting processes and keeping detailed construction logs.

• Presenting construction project progress updates to clients and senior managers.

KEY RESPONSIBILITIES:

• To provide support on maintenance project.

• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

GENERAL REQUIREMENTS:

• Candidate must possess at least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• A team player with good communication and interpersonal skills
• Able to work without minimal supervision
• Able to work on scheduled standby on rotating weeks.
• Working hours: Mon to Fri, 8.30am to 5.50pm.

Only shortlisted applicants will be notified.

EA License: 14C7275| Juhi Dwivedi : R23112291

RESPONSIBILITIES:

Netlist to GDSII at block level, Subsystem Level and at Full chip.

• Worked on multiple tapeouts on Netlist to GDSII

• Hierarchical partitioning and budgeting of block-level subsystems.

• Implementation of high performance (HP) cores, low power designs

• Node experience upto 7nm, 10nm, 14nm, 28nm.

• Timing Signoff in loop through STA and ECO cycle at block and at interface.

• Block level floor planning, power planning and IR drop analysis.

• Scan chain reordering / Scan Chain repartitioning

• CTS expertise and clock tree constraints creation for meeting specifications

• MMMC optimization at Block and Sub-System Level

• Timing closure with Crosstalk and AOCV / POCV

• TCL scripting to fundamentally understand tool usage.

MANDATORY EDA SKILLS

• PnR tools such as Synopsys ICC/ICC2 and/or Cadence Innovus

Responsibilities:

• Responsible for the electrical design contents as assigned together with its follow-up for Authority and Client’s approval.
• Preparation of electrical design calculations, drawings, specifications, and tender documents for the design projects.
• Participation in design progress and design coordination meetings.
• Liaison and coordination with all applicable Local Authority Departments to obtain approval on projects.
• Responsible for the design review of the electrical services.
• Participation in design review meetings and workshops.
• Preparation of meeting records, design review and design progress reports.

Requirements:

• Degree in Electrical Engineering or other related field
• Minimum 8 years of professional hands-on electrical design experience in building and infrastructure projects
• Excellent technical skills and knowledge in field of expertise
• Experience with full project life-cycle engineering stages from feasibility study, through construction to commercial operation
• Strong project management, communication and interpersonal skills
• Proven track record of developing and delivering innovative client technical solutions