The New Product Introduction (NPI) process engineer will provide Dermcut Medical Pte Ltd with technical support and operating knowledge for our medical device operation. This role will conduct critical engineering functions such as product validation, troubleshooting, identifying and implementing process improvements.

The engineer will work closely with project manager and is in charge of taking the prototype from pilot scale into full scale manufacturing in support of commercial efforts. This position will focus on developing various processes and implementing those to support mass production.

Primary Responsibilities

• Establish processes based on product specifications.
• Develop control plans, gage repeatability & reproducibility, test method verification & validation, and pFMEA.
• Identify areas of process improvement to reduce and minimize process related nonconformance incidents and to maximize efficiency of the process.
• Co-ordinate the generation of dossier including but not limited to design files, technical files and project files to include design outputs, shelf-life studies, biocompatibility, sterilisation, risk analysis, validation master plans, IQ's, OQ's, PQ's and test regimes.
• Responsible for screening and optimization of process parameters to achieve robust and stable processes and maximize yields, efficiencies and process capabilities.
• Perform other related duties and responsibilities as assigned.

Education / Experience Requirements

• Bachelor’s degree in process engineering or similar qualification.
• A minimum of 2 years’ experience in the medical device industry.
• A strong understanding of validation strategy (IQ/OQ/PQ), support protocols and reports.
• Experience in root cause analysis of technical discrepancies/abnormalities.
• Familiar with FDA documentation requirements, ISO 13485 quality management system, lean manufacturing, and good manufacturing practice.
• Experience with SolidWorks and Microsoft Project preferred.

Job Responsibilities:

•Lots handling, WAT analysis and process optimization

•Device development, Yield trouble shooting and reliability improvement

•Fab transfer & Customers handling

•Customized structure process integration development

• To be responsible for helping to drive leading edge process/device development and optimization of devices in order to meet scaling, performance, reliability, and manufacturability requirements.

• Identify and solve IC process and device problems

Job Qualification

•Bachelor degree or above in Materials Science, Electrical Engineering, Chemical Engineering, Mechanical Engineering, Physics, Chemistry or a related engineer discipline.

• 5+ Years Experienced Process Engineering

• Fab 12" knowledge is preferred

• Knowledge of Statistical Process Control (SPC) and/or Design of Experiments (DOE) principles

•Good communication skills, be able to work within cross-functional teams, including internal and external partners

About Antina

Founded in 2020, Antina is a JV between Starhub Mobile and M1 and is responsible for the rolling out of the 5G Standalone (SA) Radio Access Network (RAN) in Singapore for the two mobile network operators.
The Standalone 5G (SA) RAN is a game-changing ultra-high speed, low-latency network, and one which will enable new use cases across entertainment, cloud gaming, transportation, education and healthcare. 5G is used across three main types of connected services, including enhanced mobile broadband, mission-critical communications, and the massive IoT.

Non-standalone 5G (NSA) was the first stage of 5G, using a new 5G radio (or 5G NR) access network overlaid on an existing 4G LTE network core. Standalone (SA) 5G uses the 5G NR access network on a brand new 5G network core. Both approaches provide value, but many of the most exciting new features and innovative use cases of 5G can only be realized through a standalone 5G network.

Purpose

The primary role of our Operations Engineer is to monitor and maintain 3.5GHz C-Band RAN systems to ensure operational efficiency and continuity for the company’s business.

Duties and Responsibilities

1. Carry out 24 x 7 daily monitoring of the 3.5GHz C-Band RAN systems’ faults and alarms.
2. Issue trouble tickets and tracked the fault resolution to ensure that any fault raised is responded to and resolved within the agreed SLA.
3. Coordinate with StarHub and M1 to develop, implement and maintain processes/procedures for daily operations, system configuration and maintenance activities.
4. Coordinate with StarHub and M1 to assess, plan, align, schedule and implement Change Request (CR) raised by StarHub and M1.
5. Generate monthly network performance and usage reports or any ad hoc reports upon request by StarHub and M1.
6. Coordinate and work with the equipment vendor, StarHub and M1 to test all gNode B software upgrade and patches with their respective 5G Core Network to ensure end to end compatibility.
7. Coordinate with equipment vendor, StarHub and M1 to schedule a mutually agreed timeline to load the software upgrades/patches to the live network.
8. Administer all system and user management functions of the 5G RAN OSS, which includes managing the access right of StarHub's, M1's and the equipment vendors, performing software and hardware upgrades, security functionalities and system maintenance (such as database maintenance).
9. For 5G Exploratory Platform (5GEP), to be the interface with IMDA to update on changes to network configurations, software versions and procedures.
10. Coordinate with StarHub and M1 to support project implementation and network expansions.
11. Interface with vendors and contractors on all operational and project support activities.

Requirements

Qualifications:

1. New graduate with NITEC, Diploma or Degree in Electrical/ Electronic/ Telecommunication or related qualification or possess at least two years of related working experience.

Technical Skills:

1. Preferable to have some knowledge in telecommunication networks, knowledge of cellular network would be an advantage.
2. Preferable to have some basic IP knowledge.

Interpersonal skills:

1. Maintain a strong learning attitude and able to keep up in a fast-paced environment.
2. Able to work independently and is also a good team player.
3. Possess good communication skills.
4. Strong commitment to work and have good initiatives.

How to apply

Apply here via myCareersFuture or send your CV directly to [email protected].

Antina is a company driven by ability and hardwork. We adopt fair employment practices and employment decisions will be based on merit, qualifications and abilities. Antina does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Visit our company website at www.antina.com.sg for more information.

Eigen Energy is a systems integrator for solar energy and electric vehicle charging infrastructure, with technical competencies in engineering and construction, energy management, software engineering and cross platform integration.

We are looking for a Assistant Engineer to assist with the scheduling, planning, forecasting, resourcing, and managing of technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

Roles & Responsibilities

• Lead installation team to carry out solar panel installation works which include installation of solar panels on the roof, installation of solar PV inverter and connection to the existing electrical switch board
• Manage multiple solar installation projects across Singapore
• Liaise with client, contactors and internal teams to ensure ontime project delivery
• Execute project installation with the M&E shop drawings provided by engineer
• Assist with ad-hoc duties if needed

Requirement:

• Minimum 2 years of working experience in electrical engineering, solar field is preferred
• Able to read and understand M&E shop drawings
• Able to work outdoor, under the sun

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

Job Overview

In today's information-centric world, the core of information technology lies in the semiconductor industry. UMC is a leading global semiconductor foundry company and we are sincerely inviting process engineers to join us. You have the opportunity to develop your expertise in the semiconductor industry and improve the conditions for advanced technologies through design and development experiments to provide a more stable process at lower cost and higher yield! Learn to establish a cooperative atmosphere with various manufacturers and engineers to jointly develop strategies and solutions to improve the company's efficiency.

Responsibilities

• Day to Day monitoring and ownership to timely address in-line SPC/defect/Equipment abnormality, handling and disposition
• Manage projects in productivity improvement, particularly for new processes, using process characteristic analytical tool to improve process condition and technology
• Establish process parameters for a variety of semiconductor equipment to ensure line stability
• Evaluation and development of new equipment/materials/process

Qualifications

• Minimum requirement of a Bachelor's Degree in Electronic Engineering , Electrical Electronic Engineering, Chemical Engineering, Materials Science, Mechanical Engineering and Physics
• Demonstrated experience of at least 2 years in semiconductor foundry module process
• 22/28 nanometer and below advance technology nodes experience is highly desirable
• Strong understanding of process development, optimization and troubleshooting.
• Proven leadership skills in leading cross-functional teams and managing projects related to process improvement or technology transfer
• Ability to analyze complex process issues, identify root causes, and implement effective solutions
• Experience skills including SPC, 8D reporting, DOE, FMEA and PMO is preferred
• Able to commit shift work

Position Overview:

We are looking for a passionate and motivated AI Engineer to join our team, focusing on innovative projects in image and video applications. In this role, you’ll contribute to the development and improvement of AI algorithms, working alongside experienced team members to create advanced solutions in image processing and computer vision.

Responsibilities:

• Assist in the development of algorithms for image and video processing, including tasks like image restoration, enhancement, and segmentation.
• Contribute to the design and implementation of computer vision and deep learning solutions, proposing ideas to improve algorithm performance and address practical challenges.
• Collaborate with software and hardware teams to support the optimization of algorithms for efficient, real-time performance on various devices.
• Participate in testing and refining algorithms to ensure they perform well across different conditions and environments.
• Work with software engineers to integrate algorithms into broader software systems, learning how to achieve smooth functionality and user experience.
• Stay updated on the latest advancements in AI and computer vision, sharing ideas that could be applied to future projects.

Qualification/ Requirements:

• Education: Master’s or Ph.D. degree in Computer Science, Electrical Engineering, or a related field.
• Relevant academic or project experience in image processing and computer vision, with hands-on work in areas such as image restoration, generation, enhancement, or segmentation.
• Proficiency in programming languages such as Python, with familiarity in deep learning frameworks like PyTorch or TensorFlow.
• Strong foundation in mathematical concepts, such as probability and optimization, with an eagerness to apply these skills in AI algorithm development.
• Enthusiasm for learning advanced AI techniques, including generative models (e.g., GANs, VAEs) and language-guided generation, with a proactive attitude towards skill-building.
• Effective communication skills and a collaborative mindset, with a passion for teamwork and innovation.
• Interest in image processing, computer vision, or multimedia technologies; personal projects or hobbies related to photography or similar fields are a plus.

EDP Renewables APAC is the main subsidiary of EDP Group, a global leader in the renewable energy sector and one of the world’s largest wind producers. With its headquarters in Singapore, EDP Renewables is the leading sustainable development hub for the Asia Pacific region with activities across nine different markets. Our activities are focused on the design, development, management, and operation of renewable energy sources, namely solar, wind, as well as new technologies such as storage.

EDP is a global energy group leading the Energy Transition, Innovation and Sustainability. Using the technology of the future, we create solutions highly focused on the needs of our people and our customers, never neglecting our role and contributions to society. To achieve our goals, we aim to attract diverse people with high potential through the professional opportunities we create.

Join us to be part of a renewable energy leader that reinvests in society through sustainable projects and social as well as cultural causes. You will have the opportunity to actively participate in our global transformation, by changing tomorrow now.

Manage construction of assigned projects from start of construction to Commercial Operation Date (COD), ensuring compliance with assigned targets in terms of schedule, cost, while making sure all the internal requirements (e.g. HSE) are fulfilled.

Responsibilities

• Track and monitor project schedules and budget, flagging out any potential deviations in terms of timings and costing, using the corporate tools and platforms
• Manage contractors and other third parties in an effective and efficient manner to ensure projects run smoothly
• Identify potential risks in terms of construction and progress, making sure these are flagged to the senior project manager
• Enforce quality checklists for review or inspection of solar projects
• Manage and interact with client throughout construction

Education/Experience

• Diploma or Bachelor’s degree in Engineering
• At least 3 years of working experience in construction / installation projects
• Prior renewable energy or construction industry experience, particularly solar preferred

Core Requirements:

• Proven track record of effective communications with project stakeholders
• Good project management skills with ability to report in a clear and concise manner
• Excellent interpersonal skills with strong verbal and written communication abilities
• Skilled in project management frameworks (eg. Gantt Chart/Scrum/PMP)

When you join EDP Renewables APAC, you will have access to:

• Professional experience in a leading global company in the renewables industry with flexible work conditions
• Recognition through remuneration compatible with the role and other additional benefits
• Opportunities for personal and professional development, e.g. cross-cutting projects, mobilities and volunteering

About EDP Group:

As a socially responsible company, we incorporate our values and practices with the principles of Diversity and Inclusion. To achieve all our objectives, we intend to attract, develop and retain different profiles, assuming diversity as a key factor and differentiator of fundamental innovation in our organisation. We welcome and value all people, and we are committed to the inclusion and sense of belonging of each person who is part of the EDP Group.

What makes us proud as an employer:

• TOP Employer APAC, Singapore 2024 certification
• TOP Employer Europe 2024 certification
• Bloomberg Gender Equality Index 2021
• Top Workplaces US 2021
• Certification in Conciliation (Excellence) by the Más Familia Foundation

Essential Duties and Responsibilities

• Responsible for software development lifecycle activities, including system study, analysis, design, code, test, and deployment for product using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Work with project team members to identify product requirements and help define project scope, objectives, and plans accordingly.
• Write, analyze, optimize, and debug product application code to maximize performance and quality.
• Create automated unit tests and integration tests.
• Write and maintain the internal tools to diagnose software component issues, improve productivity of build and release.
• Document technical specifications and functional specifications
• Participate in agile planning and scope estimation for team projects.
• Mentor and execute in Agile, Lean, and Continuous Delivery best practices.

Requirements

• BS/MS in Computer Science/Engineering or related field
• 5+ years of software development experience in user interface application development using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS.
• Experience in turning designs into responsive UIs with ReactJS /HTML5 / CSS (LESS)
• Experience in leveraging development workflow with tools like npm, webpack and Node.js.
• Experience developing in Node.js development.
• Experience with design patterns, performance/memory analysis, multithreading.
• Agile / Scrum experience including TDD, unit testing, and continuous integration.
• Strong analysis and problem-solving skills.
• Excellent interpersonal skills including verbal and written communication skill.
• Communicates well in English.

Bonus

• Experience in WPF/WCF and MVVM programming
• Experience on creating webview2 UWP apps.
• Experience in integrating with RESTful APIs

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:
As an Embedded Software Engineer, you will contribute to the development of application test software, device drivers and customer reference software. You will be working in various aspects of the SoC development in FPGA prototyping, post silicon validation and customer reference applications.

• Work closely with SoC Design and Verification engineers to develop a comprehensive and complimentaryvalidation test plan.
• Participate in SoC design reviews to have in-depth understanding of the chip.
• Participate in PCB design review to provide requirements from software perspectives.
• Develop Hardware Abstract layer drivers for in-house testing as well as production ready SDK for customers.
• Validate new and existing hardware IP on FPGA prototype and actual silicon.
• Validate system level performance and test for robustness of SoC.
• Working with Product and Application team to develop software for the customer reference design in areas such as motor controls, Human Machine Interface (GPU), Edge Machine Learning applications.

Your Skills and Experiences:

• Bachelors or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Minimum 3 years in firmware development in ARM-based MCU products.
• Minimum 2 years’ experience in the Semiconductor industry or equivalent technical knowledge/experience in electronics circuit design.
• Understanding of ARM architecture, heterogeneous multicore system, and communication interfaces such as USB, Ethernet, CAN, Bluetooth, SPI, I2C, UART, SDMMC will have an added advantage.
• Understanding of DVP, Graphics accelerator and machine learning models deployment.
• Worked with RTOS, device drivers, filesystems, HAL, security, and Software development cycle.
• Proficient in programming language of C, C++, and assemble language.
• Proven experience in common firmware development tools and lab tools, such as IDE (KEIL, IAR, GCC), Debugger (ULink, JLink), Lab equipment (Oscilloscopes, Programmable power supplies, Logic Analyzers etc.).
• Good with Electrical interface, schematic, electronic component specification and datasheet.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

About Us:

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary:

You are responsible for ensuring robust infrastructure, managing servers, databases, analyzing system operations, and supporting digital transformation in semiconductor manufacturing.

Key Responsibilities:

• Supervising and managing the IT infrastructure to ensure the seamless operation of a semiconductor intelligent manufacturing.
• Leading and driving digital transformation initiatives within the organization to enhance operational efficiency and effectiveness.
• Navigating and overseeing the complexities of international IT projects, ensuring successful collaboration and cross-cultural teamwork.
• Planning, designing, and implementing Fab infrastructure system solutions.
• Performing server, storage, and database management to maintain optimal system performance and reliability.
• Conducting system operation optimization analysis to identify and implement improvements for enhanced performance.

Education Qualification & Essential Experiences:

• Bachelor’s or higher degree in Information-related Degrees
• Over three years of management experience in x86 servers and SAN storage.
• Experience in VM and Linux management.
• Proficient in Windows platform management and DB2, Oracle, or SQL database administration.

Personal Attributes:

• Must be available to travel to Taiwan for a training period lasting 6 to 9 months.
• Able to be reliable and accountable in all tasks and responsibilities.
• Have the drive to achieve goals and complete tasks independently.
• Proficient in effectively conveying information through both written and verbal communication.
• Open to taking on challenging tasks and embracing new opportunities.
• Flexible with availability after hours and skilled at handling on-call or on-site issues effectively.

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

Our client is a top-tier global pharmaceutical powerhouse, committed to pushing the boundaries of medical innovation and delivering breakthrough treatments to patients worldwide. Be a part of a mission to transform healthcare and make an impact on patients' lives.

As the Senior Production Engineer, you'll be at the forefront of R&D manufacturing operations.

Your Role:

• Manage R&D manufacturing operations and be a technical expert in the process.
• Refine manufacturing techniques, lead method validation projects, and be the go-to expert for training operators on Standard Operating Procedures (SOPs).
• Documenting crucial process safety and risk assessments, maintaining the highest standards of excellence.

Requirements:

• Background in a regulated manufacturing environment (pharmaceutical or biotechnology preferred).
• Master's or PhD in Chemistry, Chemical Engineering, or Pharmaceutical Sciences.
• 5+ years of hands-on experience in formulation development.
• In-depth understanding of GMP, process development, validation, and pharmaceutical quality systems.
• Proven track record in pharmaceutical formulation development and technology transfer.

If you are interested, please apply with your CV attached.

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

About Mikomiko Pte Ltd:

At Mikomiko, we are at the forefront of AI Technology and AI Solution development and deployment. Our expertise spans across machine learning, deep learning, multi-model learning, transformer, NLP, frontend, backend, cloud and embedded software development, to focus on AI Generated Content (AIGC) generation and beyond. Join us in shaping the future of AI and revolutionizing industries through innovation and advanced technology.

Job Description:

The incumbent attached under AI Software Development will be involved in AI software and Social Media platform development, frontend and backend development, integration and testing for AI product and AI platform, where AIGC, machine learning (ML), deep learning (DL), computer vision, speech processing, NLP, 3D and Computer graphics and their combination might be used.

Job Responsibilities:

As a full-time employee in AI Software Development, you will be responsible to:

· Lead the architecture, design, and development of robust full-stack solutions.

· Collaborate and work closely with product managers, designers, and AI developers to understand project requirements and design UI, develop and test AI system in docker for commercial applications or to improve existing products.

· Provide technical leadership and mentorship to junior developers.

· Assist the team to develop Web/Mobile application with frontend and backend (full stack) and deploy AI system with cloud service in applications

· Participate in code reviews to maintain code quality and ensure best practices are followed.

· Be involved in system integration and operation in DevOpps, with testing and evaluation work

· Continuously research and evaluate new technologies to drive innovation.

· Troubleshoot, debug, and optimise application performance and AI systems.

· Stay ahead of industry trends, continuously researching and evaluating emerging technologies to drive innovation.

Job Requirements:

· Proven experience as a Full Stack Developer, with strong skills on both front-end and back-end technologies.

· Programming skills with experience in GUI design and implementation, frontend and backend development, and cloud/server system design and integration in the use of programming languages such as C/C++, Python, Java, Javascript/Typescript, Swift programming, C#, web related programming; strong proficiency with Database, React, Angular, Vue.js., NextJS, Nodejs, Docker, embedded software development

· Solid understanding of database systems (SQL, NoSQL).

· Extensive use of APIs and strong understanding of HTTP(S) and REST architecture.

· Knowledge of cloud services and deployment (AWS, Azure, Google Cloud, Firebase).

· Familiarity with DevOps practices and CI/CD pipelines.

· Experience with micro-services architecture.

· Familiarity with containerization and orchestration (Docker, Kubernetes).

· Ability to quickly develop expertise in new domains and products, and eagerness to master new challenges.

· Strong communication, collaborative, leadership abilities along with analytical and problem, solving skills

Additional advantages:

· Experience with data stream processing, data platforms at scale and distributed systems i.e. Spark, Kafka, Hadoop.

· AI application and deployment in limited resource with the performance optimization.

Educational Requirements:

· Bachelor’s degree in Computer Science or related field with of 3 - 6 years hands-on programming experience.

Benefits:

· Gain hands-on experience in a leading AI company at the forefront of technological advancements.

· Work closely with a diverse team of experts and professionals in the AI industry.

· Flexible working hours with official annual leaves, medical leaves, insurance provided.

· Potential for performance-based incentives

Job Description:

Responsible for field test of the mobile communication module, capturing bug log, writing test daily reports, sorting and uploading test logs, etc;

Job Requirements:

1. Be familiar with the basic principle of wireless communication and 3GPP protocol;

Experience in GSM, LTE-related wireless network test optimization, vivo or field test of other mobile phone manufacturers, familiar with mobile phone and network-related interactive signalling is preferred.

2. Skillfully use common log capture analysis tools, such as Qualcomm's qxdm, qpst, qcat, etc.

3. Major in computer and communication, college degree or above.

4. Speak fluently English and local language.

5. Legal visa and residence permit.

6. Can do all local operators post-payment card.

7. Work in an office.

Position Summary:

The Systems Engineer undertakes complex projects related to systems

provisioning, installations, configurations as well as monitoring and

maintenance. He/She applies highly developed specialist knowledge and

skills in systems administration and works toward continuous optimisation

of systems performance. He/she implements systems improvements and

instructs other IT staff in the resolution of complex issues. He/She is required

to be on standby with on-call availability with varied shifts including

nights, weekends and holidays.

He/She is able to quickly and effectively solve issues as they arise. He/She is able

to methodically identify the cause of the issue, evaluate it and develop a

solution in

collaboration with the team. He/She communicates effectively and displays

high level of service standards.

Role and Responsibilities:

Execute Systems Administration Service Levels

• Monitor systems performance and usage, including response times
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security
• Determine the systems’ short- and long-term requirements
• Manage systems report production

Advise on System Capabilities

• Advise senior leaders on system concepts and functional capabilities
• Provide technical advice to the team and clients on installation, setup configuration of systems
• Interpret internal or external business issues and recommends solutions/best practices
• Implement plans to make systems available to users in a shared, secure and controlled manner

Develop New Systems

• Lead the development of new systems as per the system requirements
• Design security and integrity controls
• Conduct new systems testing and implementation
• Define the system maintenance procedures
• Analyse the use of new systems to identify enhancement needs
• Lead research initiatives for the development of advanced and automated approaches for system administration
• Optimise systems performance
• Seek opportunities to optimise the delivery of systems services with emphasis on availability, reliability, scalability, and security
• Conduct regular system audits and upgrades
• Develop automated processes to define, measure, and report on service quality, stability and capacity Resolve issues
• Oversee the assessment of risks to systems
• Identify complex system issues to provide advisory to the stakeholders
• Investigate cause of systems issues
• Resolve complex issues
• Provide escalation support for issues presented by the user

Requirements / Qualifications

• Degree in Computer Science, Engineering or equivalent.
• At least 5 - 8 years’ experience in developing, implementing and
• maintaining IT systems
• Systematic in approach and familiar with enterprise level troubleshooting.
• Strong communications skills with stakeholders and ROs.
• Experience in healthcare applications preferred and/or willing to take up the challenges in a healthcare related industry.

Position Summary / Project Description

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

Roles And Responsibilities

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Requirements / Qualifications

• Minimum Degree in Computer Science / Information Technology or equivalent.
• Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.
• Minimum 4 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities

Responsible in the preparation of line index, tie-in list, piping layout and information, loading calculation, MTO sketch, BM/BQ, and 2D/3D CAD modeling of piping system, equipment and structure, interference detection, and model review.

Has the technical responsibility for developing stress/vibration sketch/model, and mechanical data, for interpreting moment, stress, reaction force, and displacement, and for coordination these responsibilities with reports to ensure timely completion that meets project schedule and budget.

Duties & Responsibilities:

• Studies ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan through the guidance of Senior Piping.
• Prepares line index, tie-in list, piping layout, piping information, loading calculation, steam trace layout, MTO sketch, BM/BQ, plan and isometric drawing in compliance with project standards, specifications, contract requirements, and accepted engineering and construction practices.
• Selects line which requires stress/vibration sketch following the criteria set for analysis and evaluation, prepares mechanical data, and performs calculation for initial displacement with assistance of Senior Piping Engineer.
• Assists in developing model for stress/vibration analysis, interprets and evaluates result, and recommends method of resolution to comply with applicable vendor’s allowable or code requirements.
• Performs highly specialised 3D CAD modeling of equipment, structural, and piping system, interference detection, annotation, model review, and plan drawing extraction according to project 3D modelling procedure and by the use of PDS Intergraph or SP3D CAD software.
• Prepares steam trace piping drawings and pipe support drawings in 2D CAD format.
• Assists the Senior Piping Engineers or project Key Person in field survey work to develop conceptual routing, verify tie-in location, and other related activities.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Bachelor’s Degree in Mechanical or Chemical Engineering with 5 years of experience.
• Training will be provided.
• Ability to use computer equipment and peripherals to carry out routine computing and 2D/3D CAD tasks. Ability to adapt with changes due to upgrading of computer software. Capable to utilize AutoCAD/Cad Pipe /Microstation 2D CAD; PDS Intergraph and SP3D softwares with minimal assistance.
• Ability to apply mathematical concepts in piping calculations such as exponents, logarithms, trigonometric functions, quadratic equations and other applicable formulas.
• Ability to read, analyse and interpret common technical information, reports and instructions. Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communication.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication.

Overall Summary:

Senior Network Engineer will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services.

Roles and Responsibilities:

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Qualifications/ Requirements:

• Bachelor in Computer Engineering
• Possessed CCNA, CCNP, CCIE is preferred.
• At least 5-8 years of network experience
• Experience in leading a team of 3-5 network engineer.
• Familiar with Cisco, F5, VM
• Exposure to large scale project execution
• Open to support patches/ upgrades and Tech refresh (after office hours/ weekends)

JOB DESCRIPTION

We are looking for highly-motivated and skilled programmers to join us in Biomed DAR (BII A*Star), to work on a new initiative in the development and deployment of software tools for data management support systems/biomedical data repository. Our work supports BMRC-wide research programmes and industry collaborations.

Successful candidates will work with a team of data scientists, data engineers and UI designers to program a web-application stack for automated data integrity checks, data curation, data annotation, and data imputation for structured data generated by research programmes. Successful candidates will have the opportunity to tap into a large pool of biomedical data from different disciplines and to interact with the companies/researchers to understand their real data needs.

JOB REQUIREMENT

· Minimum bachelor’s degree or diploma in the field of computer science, computer engineering, or other web programming intensive course. With expertise in at least one of the following areas: creating, maintaining, implementing APIs, front-end development, microservices architecture

· Possess minimum 5 years or more of relevant work experience.

· Ability to work independently to translate design templates and ideas into programs with efficient coding.

· Basic knowledge in data analytics and proficient in Python, Node.js, React, SQL

· Prior industry experience with engineering, financial services, healthcare is a plus.

· Able to deliver under tight schedule.

· Good team player with understanding of best practices and cybersecurity.

· Good interpersonal and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:

As a SoC Design Verification Engineer, you will be you would be part of a passionate team developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C co-simulation, to mixed-signal simulation and formal verification. You will be part of the Singapore team in developing high performance MCU chips.

• Develop detailed verification plans based on design specifications and architectural requirements.
• Create and maintain test benches for complex digital designs using System Verilog and UVM (Universal Verification Methodology).
• Write, debug, and execute test cases to verify functionality, performance, and power consumption of our SoC products.
• Collaborate with design engineers to identify, analyze, and resolve design issues.
• Conduct coverage analysis and drive verification closure to ensure all functional requirements are met.
• Mentor junior verification engineers, providing technical guidance and support.
• Continuously improve verification processes and methodologies to enhance efficiency and effectiveness.
• Participate in design and verification reviews, providing constructive feedback and recommendations.
• Stay updated with the latest industry trends and advancements in verification techniques and tools.

Your Skills and Experiences:

• Education：Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Experience: 5 years+ prior industry experience of design verification including significant System Verilog and UVM usage.
• Technical skills:

-Deep knowledge of digital logic design, SOC architecture and microarchitecture

- Proficient in simulation-based verification methodologies and languages such as UVM and System Verilog

- Skilled in developing and maintaining test benches, test cases, and verification environments

- Experience across the full verification cycle from initial planning to final tape out

• Preferred skills:

- Knowledge of low-power design techniques and verification methodologies.

- Knowledge of hardware-software co-simulation mixed-signal verification techniques.

- Knowledge of gate level simulation methodologies.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

JOB DESCRIPTION

We are looking for highly-motivated and skilled programmers to join us in Biomed DAR (BII A*Star), to work on a new initiative in the development and deployment of software tools for data management support systems/biomedical data repository. Our work supports BMRC-wide research programmes and industry collaborations.

Successful candidates will work with a team of data scientists, data engineers and UI designers to program a web-application stack for automated data integrity checks, data curation, data annotation, and data imputation for structured data generated by research programmes. Successful candidates will have the opportunity to tap into a large pool of biomedical data from different disciplines and to interact with the companies/researchers to understand their real data needs.

JOB REQUIREMENT

· Minimum bachelor’s degree or diploma in the field of computer science, computer engineering, or other web programming intensive course. With expertise in at least one of the following areas: creating, maintaining, implementing APIs, front-end development, microservices architecture

· Possess minimum 2 - 3 years or more of relevant work experience.

· Ability to work independently to translate design templates and ideas into programs with efficient coding.

· Basic knowledge in data analytics and proficient in Python, Node.js, React, SQL

· Prior industry experience with engineering, financial services, healthcare is a plus.

· Able to deliver under tight schedule.

· Good team player with understanding of best practices and cybersecurity.

· Good interpersonal and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

Competency Requirements

· Responsible for creation/ modification/ improvement of work instructions based on feedback from stakeholder(s).

· Responsible for building on medical robot/ controller unit/ cart.

· Ensure production quality and consistency.

· Provide feedback to development team on product improvement base on production flow.

· Maintain production documents.

· Analyze production process and propose production improvement plan.

· Troubleshoot production discrepancy/ variance.

· Conduct in-process verification on modular and system level.

· Program controller units

As a Senior Piping Engineer, he/she shall act as key person of the project as designated by Piping Department Manager and Lead Piping Engineer and performs the function inherent to this position. Responsible for the preparation of major piping layout, MTO sketch, and 3D CAD model review on piping system, equipment and structure, and interference detection. Has the technical responsibility for interpreting and evaluating stress/ vibration result, for reviewing piping layout, and piping information. He/She will also be responsible for reviewing piping engineering progress against approved schedule, for evaluating changes and taking corrective action when required, for providing technical guidance, and for organizing, executing and coordinating these responsibilities to ensure timely completion and meets project schedule and budget.

Duties and Responsibilities:

• To study ITB, project and design basis such as scope of work, overall project schedule, basic design data, client specification, client standard drawings, existing drawings, and plot plan.
• To assist in planning and organizing piping engineering activities and manpower requirement for the project.
• To assist in developing piping engineering and design schedule, manpower requirements, manhour distribution and execution plan based on the scope of work and approved budget manhour/schedule.
• To coordinate piping design and engineering effort with other area Lead Engineers and disciplines of the project as directed by Piping Design Supervisor.
• To prepare piping information list and layout and document list following standard procedure created for the project.
• To prepare piping general specification inclusive of specification for piping arrangement, piping support standards.
• To interpret and evaluate stress/vibration analysis result and provides necessary recommendation on resolving the method of analysis.
• To develop conceptual routing, piping layout and piping information of major critical equipment of the project such as tower/column, airfin coolers, heaters, compressors and reactors, preferably in 3D CAD format.
• To check and review all work such as piping layout and information prepared by Engineers, 3D model, MTO, BQ and other deliverables of the project for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To provide field engineering support/advice towards piping installation and testing at construction site.
• To perform the function inherent to Piping Key Person as designated by Piping Department Manager and Lead Piping Engineer.
• To evaluate the performance of and provide counseling and guidance to members of the project.
• To prepare lesson learned upon completion of the project and recommend preventive actions to avoid recurrence on future projects to Piping Design Supervisor.
• To perform other tasks that may be assigned by the Department Manager and Lead Piping Engineer.
• To carry out engineering support work during the construction phase of the project.

Requirements:

Education:

• Bachelor degree of any four years BS Engineering course preferably Mechanical Engineering or at least ten (10) years related experience and/or training; or equivalent combination of education and experience.
• Minimum of eight (8) years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support, three (3) years of which in a supervisory capacity.

Skill Requirements:

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good Knowledge of AutoCAD.
• Good knowledge of SP3D.
• Basic knowledge of 3D Model review through Naviswork or SPR.
• Interpretation of stress/vibration analysis report.
• Ability to read, analyze, and interpret common technical information, contracts reports and instructions.
• Ability to respond to common inquiries or complaints from clients and ability to write effective minutes of meeting and other related business communications.
• Strong leadership qualities and analytical and reasoning abilities.
• Good interpersonal and communication.