IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Job Responsiblities :

• Responsible for environmental protection, safety and health, radiation protection and other new government announcements or revised laws and regulations.
• Responsible for the planning, reviewing and implementation of occupational safety and health management plan.
• Assist in the investigation of occupational accidents, and be responsible for external notification and declaration.
• Responsible for various environmental safety and health related Management Systems audits and inspections and tracking the gaps and recommendation for improvements.
• Responsible for the planning, reviewing and implementation of GHS, chemical classification management.
• Responsible for the audit of contractors, suppliers and licensed waste disposal companies.
• Responsible for the company's various environmental safety and health related education and training planning and implementation.
• Responsible for ISO 14001, ISO 45001, SS 651 and other management systems operation, maintenance and internal audit, and complete the external audit planning and execution.
• Responsible for the IH and Medical Monitoring program.
• Organize all Fire Drills and CERT related activities.
• Perform ISEP related project plan assigned by the management.

Job Requirements:

• A Degree qualification in a relevant discipline
• Min 2 years of relevant working experience in Semiconductor Environment,.
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure

Roles & Responsibilities

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations.

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent.
• Must be CCNA certified, CCNP preferred.
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools.
• Experience in IPv6 and Data Centre operations an advantage.
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses.
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.

Roles and Responsibilities

Cluster Setup and Maintenance:

• Install, configure, and maintain big data platforms like Hadoop Clusters, Elastic Search, Spark, Kafka, Hive etc.
• Set up and manage distributed file systems (HDFS) and NoSQL databases (HBase, Cassandra).
• Ensuring high availability and reliability of Hadoop, Kafka and Elasticsearch Clusters.

Performance Optimization:

• Monitor system performance, fine-tune jobs, and optimize cluster utilization.
• Manage and resolve performance bottlenecks in big data environments.

Security Management:

• Implement data security policies, user authentication (Kerberos), and access control (Ranger, Knox).
• Regularly review and plan patch systems to ensure data integrity.
• Apply updates, patches, and version upgrades to all managed systems.
• Ensuring the backward compatibility and minimal downtime during upgrades.

Backup and Recovery:

• Plan and implement backup and recovery strategies for big data environments.
• Develop disaster recovery solutions and test failover scenarios.

Workflow Automation:

• Design and implement workflows using tools like Apache Oozie or Apache Airflow.
• Automate cluster management tasks like upgrades and scaling.
• Developing shell scripts and Ansible Playbooks to automate routine tasks, including monitoring, backups, and deployments.

Monitoring and Support:

• Monitor logs, metrics, and system health using tools like Ambari, Cloudera Manager, or Prometheus.
• Provide 24/7 on-call support for production systems and resolve incidents.

Collaboration:

• Work closely with data engineers and developers to support ETL pipelines and data processing jobs.
• Collaborate with stakeholders to ensure big data systems meet organizational needs.
• Working transversally with other teams to guarantee high data quality and availability.

Cloud migration

• Migration planning from On-premises to GCP & AWS cloud

Required Skills and Qualifications

Technical Skills:

• Strong knowledge of big data ecosystems (Hadoop, HDFS, YARN, Hive, HBase, Spark, Kafka and Elastic Search).
• Proficiency in Linux/Unix system administration.
• Experience with monitoring tools like Nagios, Grafana, or Splunk, HPOMI.
• Scripting skills in Python, Ansible, Shell, or Bash.
• Familiarity with cloud platforms (AWS, Azure, GCP) and their big data services.

Soft Skills:

• Strong problem-solving and analytical abilities.
• Effective communication and collaboration skills.
• Ability to handle high-pressure production environments.

Preferred Experience

• 8-9 years of experience in big data administration or similar roles.
• Hands-on experience in scaling and managing large, big data clusters in production environments.

Interested applicants please send your resume in MS Word format and attention it to Tan Joanna (R1104661)

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

EA Registration Number: R1104661

Business Registration Number: 200611680D. Licence Number: 10C5117

Overall Summary:

Network Engineer will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services.

Roles and Responsibilities:

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Qualifications/ Requirements:

• Bachelor in Computer Engineering
• Possessed CCNA, CCNP, CCIE is preferred.
• At least 5-8 years of network experience
• Experience in leading a team of 3-5 network engineer.
• Familiar with Cisco, F5, VM
• Exposure to large scale project execution
• Open to support patches/ upgrades and Tech refresh (after office hours/ weekends)

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will be involved in the requirements gathering, development and testing of products as per evolving business needs as part of the end-to-end agile development lifecycle starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Participate in the requirements gathering sessions and contribute to the development of the functional/design specifications

2. Design algorithms and flowcharts to create new software programs and systems

3. Develop clean, efficient and extendable codes using HTML/CSS, Javascript, Java, .NET, React Native and other relevant programming languages.

4. Troubleshooting, debugging, maintaining and improving existing software

5. Perform code reviews and functional testing to ensure that standards are upheld.

6. Continuous review and refactoring code for reusability and reduce technical debt.

7. Work with QA Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

8. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively

9. Maintain and update library of reusable APIs, components and modules

10. Develop technical documentation to guide future software development projects

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as HTML/CSS, Javascript, Java, AngularJS, Bootstrap or other relevant programming languages

3. Participated in at least one full software or product development cycle, preferably using Agile Methodology

4. Excellent communication skills

5. Teamwork and collaboration skills

6. Possess critical thinking and problem-solving skills

Position Summary

The CIM Engineer is responsible for the implementation, maintenance & development of semiconductor automation facilities.

Candidates with Semiconductor, LCD industrial automation industries or smart factory / CIM experience are encouraged to apply for this position.

Key Responsibilities

• Development and maintenance of Quality Management system (QMS), Facility Automation (MC) system and Logistics automation (MCS) system.
• Responsible for new automation requirement, system survey, any modifications or improvement works.
• Identify equipment failures, root cause analysis, and recommend solution for technical issues.
• Provide cross-functional cooperation and vendor interaction to troubleshoot, analyze and develop solutions for problems involving integrated systems.

Requirement

• Bachelor’s Degree in Engineering, Computer Science, IT or similar.
• More than 5 years of experience in related field including 3 years of development experience.
• Team player with strong analytical and problem-solving skills.
• Experience in the following:

1. Programming languages (C, C#, .Net, etc.) and DBMS (Oracle, MS-SQL, etc.)
2. SECS-I, SECS-II, HSMS/GEM, OPC, TCP/IP
3. Facility and supersystem (MES, EMS, etc.) interface
4. Logistics AGV, ACS for OHT control, OCS
5. Smart factory/CIM implementation experience

Preferred Qualifications

• Quality related implementation and operation (SPC, TAMS, YMS, DMS, RMS, etc.)
• Facility interface experience through facility automation solution
• MCS solution R&D experience

Role Description

This is a full-time on-site role for a Design Engineer at Firetec (Singapore) Pte Ltd. The Design Engineer will be responsible for designing and developing new products, creating detailed engineering plans, collaborating with cross-functional teams, and ensuring that the engineering meets quality standards.

Qualifications

• Diploma in Business Administration or relevant field
• Proficiency in CAD software, such as AutoCAD
• Strong knowledge of engineering principles and design techniques
• Familiarity with rules, regulations, best practices and performance standards
• Excellent problem-solving skills,attention to details and meeting deadlines
• Effective communication and teamwork abilities
• Previous experience in the marine or engineering industry is a plus

Employment Type

Full-time

Responsibilities:

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user.
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Candidate must possess at least a Diploma in Computer Science / Information Technology or equivalent.

Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.

Minimum 4 years and above of relevant hands-on experience in system operation support and project management.

Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.

Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.

Possesses strong analytical skills to diagnose and address application problems.

Result and customer oriented with multi-tasking capabilities

Job Description

• Conceptualisation and design of facades, preparation of drawings and structural calculations
• Delivery of technical presentations
• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members
• Supervision of construction, site inspection and training of constructors
• Preparation of technical submissions, proposals and documentation

Job Specifications

• Singaporean or PR preferred
• Degree in Civil, Structural or Mechanical Engineering or related disciplines.
• 3 – 5 years of experience in façade design, engineering and construction and project management
• Proficient in CAD software to create designs and solve technical issues.
• Strong and diverse technical background with effective presentation skills
• Well-versed in construction trends, international design standards and building regulations.
• Possess a wide network of building professionals and property developers.
• Ability to multitask and work well in a team

Knowledge, Skills and Abilities

• Proficient in CAD and 3D Modelling software - Revit, Rhino, Sketchup software
• Possesses deep understanding about various façade materials.
• Well informed in construction trends, international design standards and building regulations.
• Demonstrate organisation and communication skills
• Possesses relationship building and networking skills.
• Skilled in interacting with people of diverse cultural backgrounds at various levels.
• Possesses strong project management skills.
• Willing and able to travel as needed (1 – 2 times/month)

Position Summary:

The Systems Engineer undertakes complex projects related to systems

provisioning, installations, configurations as well as monitoring and

maintenance. He/She applies highly developed specialist knowledge and

skills in systems administration and works toward continuous optimisation

of systems performance. He/she implements systems improvements and

instructs other IT staff in the resolution of complex issues. He/She is required

to be on standby with on-call availability with varied shifts including

nights, weekends and holidays.

He/She is able to quickly and effectively solve issues as they arise. He/She is able

to methodically identify the cause of the issue, evaluate it and develop a

solution in

collaboration with the team. He/She communicates effectively and displays

high level of service standards.

Role and Responsibilities:

Execute Systems Administration Service Levels

• Monitor systems performance and usage, including response times
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security
• Determine the systems’ short- and long-term requirements
• Manage systems report production

Advise on System Capabilities

• Advise senior leaders on system concepts and functional capabilities
• Provide technical advice to the team and clients on installation, setup configuration of systems
• Interpret internal or external business issues and recommends solutions/best practices
• Implement plans to make systems available to users in a shared, secure and controlled manner

Develop New Systems

• Lead the development of new systems as per the system requirements
• Design security and integrity controls
• Conduct new systems testing and implementation
• Define the system maintenance procedures
• Analyse the use of new systems to identify enhancement needs
• Lead research initiatives for the development of advanced and automated approaches for system administration
• Optimise systems performance
• Seek opportunities to optimise the delivery of systems services with emphasis on availability, reliability, scalability, and security
• Conduct regular system audits and upgrades
• Develop automated processes to define, measure, and report on service quality, stability and capacity Resolve issues
• Oversee the assessment of risks to systems
• Identify complex system issues to provide advisory to the stakeholders
• Investigate cause of systems issues
• Resolve complex issues
• Provide escalation support for issues presented by the user

Requirements / Qualifications

• Degree in Computer Science, Engineering or equivalent.
• At least 5 - 8 years’ experience in developing, implementing and
• maintaining IT systems
• Systematic in approach and familiar with enterprise level troubleshooting.
• Strong communications skills with stakeholders and ROs.
• Experience in healthcare applications preferred and/or willing to take up the challenges in a healthcare related industry.

Position Summary / Project Description

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

Roles And Responsibilities

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Requirements / Qualifications

• Minimum Degree in Computer Science / Information Technology or equivalent.
• Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.
• Minimum 4 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• MIn 3 years QAQC experiences in building projects.
• Detail-oriented and have strong communication skills and able to work with people from all levels.

IT Engineer's Job Description

• Monitoring, support, and maintenance and documentation of the CIM systems
• Design, develop, maintenance and continuous improvements of assigned CIM applications and components
• Provide Level 2 & 3 supports for the proper operation of Production lines

IT Engineer's Requirements:

• Degree in Computer Science, Computer Engineering or related fields. Diploma with relevant experience will be considered
• Min 2 years of experience CIM with High Automation, MES and SECS/GEMS
• Knowledge of basic SQL in Oracle and Java
• Experience in Tibco (TIB / RV) / high technology manufacturing environment is an advantage
• A good team player with good communication skills and able to work independently

About TUMCREATE

TUMCREATE is a multidisciplinary research platform of the Technical University Munich (TUM) at the Singapore Campus for Research Excellence and Technological Enterprise (CREATE). We are joining forces with universities, public agencies, and industry for the advancement of future technologies.

A new multi-disciplinary project named “Centre for Energy & Emissions Modelling (CE2M) Phase 2” hosted by A*Star with TUMCREATE as one of their partners has been launched. The overall goal of this project is to provide policymakers with a toolbox to explore pathways to “net zero” in Singapore. For this purpose, an existing model integration framework shall be enhanced through a systems of system modelling & simulation approach. Different models will be coupled using interfaces that enable them to communicate with one another.

Please visit www.tum-create.edu.sgfor more information about TUMCREATE.

Objective of the position:

We are looking for an experienced Software Engineer who will work on building interfaces between models and to expand existing models to facilitate model coupling. This is a 24-month fixed term contract with the possibility of extension.

Job Responsibilities:

• Familiarise with and review existing models developed by the project partners.
• Identify weak points of the models, particularly with regards to interfacing them with other models.
• Define and implement interfaces between the models.
• Contribute to the development of a system-of-systems model that includes all models.
• Presentation of the results in at least one international scientific journal.

Job Requirements:

• PhD or Master’s degree in Electrical Engineering, Computer Science or a related field from a reputable university.
• Knowledge of software development and versioning systems.
• Programming knowledge of Python.
• Experience in software modelling, preferably in the field of energy and power systems.
• Knowledge of energy and power systems is preferable.
• Knowledge of the tools URBS and TIMES is a plus.
• Ability to interact with other researchers and define a working structure.
• Good English writing and communication skills.
• Good interpersonal skills for working in an international research team with people of different backgrounds.

What TUM CREATE offers you:

• Competitive salary that commensurate with experience
• Medical insurance
• Good amount of leave/vacation days
• Vibrant, modern and positive working environment in Singapore
• Campus-sited office location with a host of facilities
• In-building perks including gym, game room and coffee room

Applications:

Please send your application including cover letter and CV to [email protected].

We look forward to receiving your application.

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Responsibilities

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

Key Responsibilities:

• Provide remote and on-site technical support, including but not limited to, Incident Management and Problem Management

• Escalate incidents, problems, changes to Team Lead, Service Delivery Manager, Account Manager or vendors as per defined business rules, ensuring timely resolution of client service requests

• Liaise with vendors needed to achieve incident and problem resolution.

• Maintain detailed knowledge of clients’ environments, where applicable, by maintaining and updating relevant documentation.

• Provide high levels of customer service and resolving problems/issues with the client in a constructive manner.

• Prepare adhoc reports as required for contractual requirements.

• Contribute to ITIL based processes to ensure successful delivery of services and initiate solutions to improve quality and productivity

• Participate in client presentations when necessary

Job Requirements:

• CCNP or CCIE in Enterprise is required

• Hands-on experience in installation, configuration and troubleshooting of Cisco routers, wireless or switches

• Have some working knowledge of Cisco Routers, Switches, SD-WAN, DNA, Wireless products in addition to Meraki Switch, Router, Wireless products

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

• At least 3 years of experience in a technical support environment working with Cisco products

• Experience with VMWare NSX and VMWare Load balancers, is an added advantage

• Knowledge of Aruba, Bluecoat, Ironport, F5, Checkpoint, Fortigate or Juniper products is also preferred

• Able to work in a 24x7 and team environment

About the team:

The Enterprise Technology team is a diverse and collaborative group of professionals responsible for driving the technological advancements within GXS Bank. We work on cutting-edge projects that aim to enhance the bank's infrastructure, security, and operational efficiency. Our team is at the forefront of innovation, leveraging the latest technologies such as cloud computing, artificial intelligence, and data analytics to deliver exceptional solutions.

About the Role:

The End-User Computing (EUC) Specialist/Engineer will be responsible for managing and supporting the endpoint devices used by GXS Bank employees. This includes desktops, laptops, mobile devices, and peripherals. The role involves ensuring the reliability, security, and optimal performance of these devices, addressing technical issues, and implementing best practices for endpoint management.

Key Responsibilities:

1. Endpoint Device Management

• Oversee the deployment, configuration, and management of endpoint devices (desktops, laptops, mobile devices, etc.).
• Manage and maintain device lifecycle, including procurement, setup, patch management, and decommissioning.
• Ensure devices are compliant with security policies and regulations.

2. Technical Support and Troubleshooting

• Provide first and second-level technical support for endpoint devices.
• Diagnose and resolve hardware and software issues, including connectivity, performance, and application problems.
• Escalate complex issues to higher-level support or external vendors as necessary.

3. Software and Patch Management

• Deploy and manage software applications and updates across endpoint devices.
• Implement and monitor patch management processes to ensure devices are up-to-date and secure.
• Utilize endpoint management tools (e.g., Jumpcloud, Automox, Microsoft Endpoint Manager, SCCM, Intune) for software distribution and compliance monitoring.

4. Security and Compliance

• Implement and enforce security measures, including antivirus software, encryption, and endpoint protection solutions.
• Conduct regular security audits and vulnerability assessments on endpoint devices.
• Ensure compliance with internal security policies and external regulations (e.g., MAS, NIST, CIS).

5. User Training and Documentation

• Create and maintain documentation for device configurations, troubleshooting procedures, and best practices.
• Conduct training sessions for end-users to enhance their understanding and effective use of endpoint devices.
• Develop FAQs and knowledge base articles to support self-service and reduce sup
• port requests.

6. Performance Monitoring and Reporting

• Monitor endpoint device performance and usage metrics to identify trends and potential issues.
• Generate regular reports on device health, support ticket resolution times, and user satisfaction.
• Provide recommendations for system improvements based on performance data.

7. Collaboration and Communication

• Work closely with other IT team members, business units, and external vendors to ensure cohesive support and implementation of endpoint management solutions.
• Communicate effectively with stakeholders to understand their needs and address technical concerns.
• Participate in regular team meetings and contribute to strategic planning for IT services.

Qualifications:

Education: Diploma/bachelor’s degree in computer science, Information Technology, or a related field.

Experience:

• Minimum of 3 years of experience in IT support or endpoint management.
• Hands-on experience with endpoint management tools (e.g., Automox, SCCM, Intune, Jumpcloud).

Technical Skills:

• Proficiency in troubleshooting and resolving hardware and software issues on endpoint devices.
• Knowledge of endpoint management tools for software deployment, patch management, and compliance monitoring.
• Familiarity with scripting languages (e.g., PowerShell, Python) for automation tasks.
• Understanding of IT security practices and endpoint protection solutions.
• Experience with mobile device management (MDM) solutions.

Soft Skills:

• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Customer-focused mindset with a commitment to delivering high-quality support.

Jason Energy Pte Ltd, a wholly owned subsidiary of Jason Marine Group Limited has significant experience in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised Telecommunication System Integrator in the oil and gas global market, we provide turnkey project systems that covers a full spectrum of services from the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

We are looking for a Project Engineer to prepare, schedule, coordinate and monitor the projects that are being assigned to him/ her. Reporting to the Project Manager in the Project Team, he/ she will

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements:

• Diploma or Degree in Engineering or relevant field
• Proven working experiences as a project engineer
• Project management and organizational skills
• Commitment to exceeding customer’s expectations
• Time management and organization skills

Good to Have

• MS Office Skills
• Microsoft Project Skill
• Dynamic Business Central knowledge will be an advantage
• Negotiation skills

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Reponsibilites

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

Job Title

Software Engineer / Software Engineer Intern

Job Location

Singapore (Pasir Panjang)

Years of Experience

0 - 5 years

Job Description

Join Garuda Robotics as a Software Engineer and be part of a dynamic team building the future of drone technologies in a fast-paced, start-up-like environment. You’ll work on innovative projects, developing software products that form an essential part of cutting-edge autonomous uncrewed aircraft systems, while gaining hands-on experience with real-world applications. This is your chance to contribute to groundbreaking technology, collaborate with passionate engineers, and shape the future of aerial innovation!

As a Software Engineer / Software Engineer Intern in our Design & Engineering Team, you will be building full stack, real time, mission critical software on the cloud for the unmanned aerial vehicles(UAVs) operations.

You will help create exceptional user experiences for our clients, contributing throughout the software development lifecycle—designing, developing, testing—mission-critical web and mobile apps for drone operation, data visualization, and industry services. This role offers exposure to cutting-edge UX technologies, including web, mobile, geospatial, and 3D tools.

You will contribute to designing and developing reusable back-end applications and infrastructure for drone apps. This includes data and object modeling, enhancing system reliability, securing critical information flow, and managing configuration changes.

Responsibilities

1. Build and design frontend and backend systems
2. Design UI/UX with intuitive, clear and consistent user interfaces
3. Design performant, maintainable and reliable microservices
4. Join a team of engineers in SDLC to push the product and project for customers

Benefits

1. Learn to design and develop applications in a hybrid cloud environment, blending on-premise infrastructure with AWS, Mobile Edge Compute, and other major cloud service providers, to create web, mobile, mapping, and real-time video streaming with AI video analytics for mission critical applications.
2. Learn about full stack software development using JavaScript, Python, React, NodeJS, NoSQL databases, and enterprise message bus (RabbitMQ). Advanced candidates will also be exposed to ROS, IoT / embedded systems, and simulators.
3. Learn about DevOps and cybersecurity, maintaining Linux servers, tuning video streaming applications, optimising CI/CD pipelines, and implementing information security controls as part of our ISO/IEC 27001 commitment.
4. Learn to build live applications for facilities management, aerial surveillance and agriculture use cases

Requirements

1. Strong problem solving and software development skills.
2. Experience with any of the abovementioned technologies is a plus.
3. Excellent teamwork and ability to work with engineers of different disciplines.
4. Positive attitude and willing to explore new technologies.
5. For Internship: sponsorship of your working visa from the school or self to be able to work in Singapore.

Working Hours

Total work hours: 40 hours per week.