Duties & Responsibilities

• Prepare, interpret and evaluate stress/vibration result.
• Review piping layout and piping information.
• Review piping engineering progress against approved schedule.
• Evaluating changes and taking corrective action when required.
• Provide technical guidance, executing and coordinating the above responsibilities to ensure timely completion and meets project schedule and budget.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements

• Bachelor’s degree in Mechanical Engineering.
• Minimum 10 years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support.
• Good knowledge of Caesar II.
• Interpretation of stress/ vibration analysis report.
• Basic knowledge of AutoCAD.
• Basic knowledge of 3D model review through Naviswork or SPR.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication skills.

Roles and Responsibility:

• Preparation of Piping Material Specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To calculate/validate pipe wall thickness, branch reinforcement etc.
• To prepare line index, Material summary (BM/BQ).
• To carry out engineering support work during the construction phase of the project.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Minimum of Ten (10) years in the field of piping engineering involving material, design, production work, 3D model review, stress and construction engineering support.
• Bachelor’s Degree in Mechanical Engineering or equivalent combination of education and experience.
• Good knowledge and experience of ASME, ASTM, BS and other relevant standards.
• Basic knowledge of AutoCAD/AP3D/S3D.
• Basic knowledge of 3D Model review through Navisworks or SPR.
• Strong analytical and reasoning abilities.
• Good leadership skills.
• Good interpersonal and communication skill.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to perform modelling and real-time simulation of electric vessel’s onboard microgrid and propulsion system.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to develop onboard microgrid simulation models with energy management systems as well as to plan and test the relevant hardware systems.
• Work with research team to deliver the work scope and undertake these responsibilities in the project.
  Work Responsibilities:
  1. Develop detailed electrical models of the microgrid (power system) of various e-vessels based on the concept design in a simulation environment such as Matlab/Simulink.
  2. Design and develop an intelligent energy management system for the e-vessel microgrid for coordinated control of multiple energy sources considering cost, carbon, and operation constraints.
  3. Operate the simulated electrical model with EMS controller to perform simulations for various cases to demonstrate performance and recommend improvements at unit, sub-system and whole system level.
  4. Implement and carry out simulation studies for onboard microgrid and connection to shore charging infrastructure.
• Recommend efficient and reliable power system architecture(s) with other merits of high-density and light-weight.
• Test the relevant power electronics and drives system hardware and troubleshoot the challenging problems.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment and assist in laboratory management.
• Mentor students involved in the research project
• For those hired at senior levels, management responsibilities may be included

Job Requirements

• Have a Master’s or PhD’s degree in Electrical Engineering or equivalent from a recognized University. Major in Power Engineering will be advantageous.
• Minimum 3 years of relevant experience in modelling and energy management algorithm development using MATLAB/Simulink for microgrid applications.
• Knowledge of power electronics, drives, and control is highly preferred. Hardware testing experience will be advantageous.
• Have experience and commitment to participate in project meetings.
• Self-motivated team player and good project management skills.
• Excellent writing, communication, presentation, and interpersonal skills.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.
• We are looking for people who
• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Research & Development (R&D), Post Market Surveillance, and Global Regulatory Affairs (RA) Teams

Reports to: Senior Manager QA R&D

Function: Global QA & Compliance Organization

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible to ensure that products meet quality goals and regulatory requirements, including but not limited to FDA Regulations, ISO 13485, EU MDR requirements, and Risk Management per ISO 14971 and maintain compliance of the Quality Management System (QMS).

Duties and Responsibilities

• Partner with R&D teams in the USA, Japan, and Singapore to ensure that design control is completed in accordance with procedures, WI, regulatory requirements, and assure that required outputs have been completed
• Execute risk management for devices, processes, and provide the assessment results from product development through to the launch
• Maintain and update risk management files with Global R&D/Manufacturing Engineering (ME) teams to support product development (Risk Management Plans, Risk Control Log, Benefit Risk Assessment Risk Management Report, xFMEA, etc.), and act as the Risk Management expert
• Assist in the review and approval of design development plans, verification and validation protocols, reports, master V&V plans and reports, and design transfer
• Review and approve design verification test protocols, reports and data from a logical point of view (Compliance, rationale, objectiveness and statistics)
• Partner within Quality and R&D to ensure design control documentation (Risk Management, Traceability/Linkages) & design change control requirements are met
• Review and approve biocompatibility protocols and reports
• Ensure compliance of IQ, OQ, tests method validation, Standard Operating procedures and work instructions regarding product development
• Maintain compliance to QMS procedures of the R&D Singapore site, and support the Singapore R&D Site - QA
• Support External audits by competent authorities and notified bodies
• Support internal audits at the local site, and other sites as required
• Review and approve other quality documents (e.g., IQ, OQ, PQ, WI, etc) within areas of responsibility
• Propose and execute quality/process improvements. Write/review policies/ processes/ procedures and related documents
• Manage and monitor the progress of the calibration and maintenance of testing equipment. Ensure calibration or maintenance records satisfy regulatory and QMS requirements (act as Equipment Control Administrator in Singapore)
• Participate in development projects and change control request meetings to support the resolution of engineering issues
• Collaborate with the post-market surveillance team and complaints investigation teams to maintain risk management process throughout a product’s lifecycle
• Provide support for other quality activities and improvement initiatives, quality data collection and trending, CAPAs, change controls, training, etc.
• Support initiatives as identified by management to support QMS and other regulatory requirements in Singapore

Requirements

Experience

• At least 4+ years of Industry experience working as QE Engineer in Medical Device/ Pharmaceutical product or optical engineering business field
• Experience in test method validation
• Experience in Design control, Design Transfer, Design and Development Process
• Demonstrated knowledge of Risk Management (ISO14971), Design control, Design and Development Process and Quality System (any one of ISO13485).
• Understanding and Knowledge of biocompatibility studies
• Experience in coordination and planning of complex activities and ability to identify and resolve complex problems through effective use of technical and interpersonal skills
• Product development experience (e.g. approaches for definition of requirements and specification setting for verification and validation). Practical experience in design control and risk management
• Effective use of oral and written communication skills to clearly communicate the quality position, and the actions necessary to resolve issues
• Interpersonal, team, leadership, and negotiation skills to handle conflicting priorities
• Strong oral and written communication skills, excellent interpersonal and cross-cultural skills required
• Capable of clearly presenting and justifying quality requirements to management
• Accreditation by a professional body is highly desirable. Examples include American Society for Quality (ASQ) Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)

Skills/Accreditations

• Smooth communication ability
• Business software skills (e.g. Word, Excel and Power point)
• Experience with statistical software such as Minitab
• Voluntary working attitude with a creative idea
• Passionate working attitude to pursue a goal with patience.
• Flexibility for changes

Academic Qualifications

• A bachelor’s degree or higher in Chemical, Bioengineering, Mechanical, Optical Engineering or related fields.

Travel requirements

• 2-3 international travel annually mainly Thailand.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Responsibilities

1. Technical oversight and issue resolution

2. Safety and quality management

3. Project administration and progress monitoring

4. Stakeholder management and coordination

5. Reporting and compliance

Key Skills:

1. Technical knowledge

2. Communication and coordination

3. Analytical and problem-solving

4. Safety and quality management

5. Stakeholder management

Qualifications & Experience

1. 8+ years of experience in civil & structural engineering

2. Relevant experience in deep excavation, foundation, tunnel, and building works

3. Recognized Civil & Structural Engineering degree (PEB Singapore)

4. Accredited by JAC (IES/ACES)

5. Proficient in PSSCOC contract administration

6. Strong leadership, supervision, and interpersonal skills

7. Commitment to safety and health

8. Familiarity with statutory codes, quality control, and construction administration

Desired Qualities:

1. Proven track record in leading supervision teams

2. Excellent organizational skills

3. Strong communication and interpersonal skills

4. Ability to manage teams and ensure personnel welfare

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Role Description:

• Responsible for semiconductor fab automation with Autonomous Mobile Robot (AMR) & SECS/GEM
• MES knwolegeable and work with vendors to evaluate and enable communication between MES, Tool and AMR.
• Responsible for proposing/developing/implementing/maintaining IOT automation systems collecting/cleaning/restructuring equipment data and storage in data management system
• Maintenance of AMR and existing system performing periodic data integrity checks, create automated failure alerts, perform timely fixes when necessary and continuously improve the automation frameworks with new innovative features\
• Create Web UI for admin/user required view & operation. Create automated periodic insights/analytics/reports/visualisation/alerts operations required for timely decision-making processes.

Job Requirements

• Degree in Computer Science, Engineering or relevant field
• Ability to work independently and team player to deliver result in fast paced and collaborative environment
• Preferable with 1-3 experience in various semiconductor process module/knowledge, equipment engineering or digital transformation, specifically in SECS/GEM Automation.
• Knowledge in communication systems and network protocols used between tool and factory automation (SECS/GEM knowledge & semiconductor/manufacturing environment)
• Knowledge in variety of operating system (OS) used for automation (e.g SECS/GEM, php, js, sql). Other technical skills such as AMHS, vb, xml will be a plus/
• Preferable to have experience in data mining, database engineering, software development

Role Description:

• Responsible for semiconductor fab automation with Autonomous Mobile Robot (AMR) & SECS/GEM
• MES knwolegeable and work with vendors to evaluate and enable communication between MES, Tool and AMR.
• Responsible for proposing/developing/implementing/maintaining IOT automation systems collecting/cleaning/restructuring equipment data and storage in data management system
• Maintenance of AMR and existing system performing periodic data integrity checks, create automated failure alerts, perform timely fixes when necessary and continuously improve the automation frameworks with new innovative features\
• Create Web UI for admin/user required view & operation. Create automated periodic insights/analytics/reports/visualisation/alerts operations required for timely decision-making processes.

Job Requirements

• Degree in Computer Science, Engineering or relevant field
• Ability to work independently and team player to deliver result in fast paced and collaborative environment
• Preferable with 1-3 experience in various semiconductor process module/knowledge, equipment engineering or digital transformation, specifically in SECS/GEM Automation.
• Knowledge in communication systems and network protocols used between tool and factory automation (SECS/GEM knowledge & semiconductor/manufacturing environment)
• Knowledge in variety of operating system (OS) used for automation (e.g SECS/GEM, php, js, sql). Other technical skills such as AMHS, vb, xml will be a plus/
• Preferable to have experience in data mining, database engineering, software development

Mission statement:

Lead the engineering execution of medium-size projects and ensure that all related activities are performed in accordance with Hitachi Energy policy, contractual agreements, quality standards, health, safety & environment requirements. Responsible for day-to-day designing and engineering activities aligned with schedule commitments. He / She is to possess technical knowledge and skills relating to the design of various transmission substation/Industry components, systems and equipment. To provide technical guidance to his/her project team and lead project engineering discussion.

Your responsibilities:

• You will design system while adhering to design and engineering principles of transmission substation/Industry, incorporate equipment, system, and safety features in design plans, comply with local and national safety standard and ethics that come with the design engineer role.
• You will maintain records and documents of all the work and design in accordance with unit and customer requirement.
• You will work in within the proposed schedule and budget for the project and liaise with project stakeholders with status update to them regarding the status of the work.
• You will coordinate mechanical and electrical tests on design, if required, conduct tests on equipment against fundamental design.
• You will manage department's compliance with organization’s risk management framework, review design drawings for practicability, completion timeframe and research capabilities.
• You will assist in development engineering resource planning strategy, coordinate with factory and supplier to ensure the design meet with the requirement, prepare design related calculation and issue bill of material·
• Living Hitachi Energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Your background:

• You hold Electrical Engineering degree or equivalent.
• Preferably with 3 years’ experiences in Electrical/Transmission Industry.
• Experience and proficient knowledge and skills in BIM - Autodesk REVIT (3D model)
• Experience in switchgear planning, design and bidding related tasks.
• Good knowledge of substations equipment, protection relays and network automation.
• Knowledge of Electrical/Transmission Utilities Industry is preferred.
• Proficiency in English language.

Key Responsibilities:

• Project Planning and Scheduling: Develop comprehensive project plans and schedules that incorporate all project activities, milestones, and deliverables. Utilize project management software to ensure accurate tracking and reporting.
• Risk Management: Identify potential project risks and develop mitigation strategies to minimize impact on project timelines and budgets.
• Resource Allocation: Efficiently allocate resources, including manpower, materials, and equipment, ensuring that projects are completed within budgetary constraints.
• Stakeholder Communication: providing regular updates on project progress, potential challenges, and changes to project plans.
• Quality Control: Ensure that project planning and execution adhere to industry standards, company policies, and client specifications, maintaining high quality and safety standards.
• Continuous Improvement: Analyze project outcomes and processes for lessons learned and opportunities for improvement in future planning and execution phases.
• Team Leadership: Lead and mentor junior planning engineers and other project staff, fostering a collaborative team environment.

Required Qualifications:

• Bachelor’s degree in Engineering, Construction Management, or a related field.
• A minimum of 5 years of experience in project planning and management within the construction or engineering industry.
• Proficiency in project management software (e.g., Primavera P6, MS Project, powerpoint).
• Strong understanding of engineering principles, construction methodologies, and project management best practices.
• Excellent analytical, organizational, and problem-solving skills.
• Desired Skills and Attributes:
• Strong leadership and team management skills.
• Exceptional communication and interpersonal skills.
• Ability to work under pressure and manage multiple projects simultaneously.
• Strategic thinker with a proactive approach to project planning and risk management.
• Commitment to continuous learning and professional development.

Job Descriptions:

• Overseeing and directing construction projects from conception to completion
• In-depth reviewing of projects to schedule deliverables and cost estimation
• Ensure safety procedures are implemented and meet company’s standard and legislation
• Ensure safety and health are in place according to building and safety regulations
• Monitor, control, and coordinate site works
• Ensure projects meet customer’s quality standards
• Any d-hoc duties as require

Requirements:

• Degree in Civil Engineering or equivalent with at least 5 years relevant experiences at or equivalent managerial level in construction
• Knowledge in Design and Auto Cad (3D) for Civil Structure work.
• Good communication skills
• Able to communicate in English and Japanese language (to handle queries and feedback from Japanese speaking associates/ clients)

Summary

People at Apple don't just build products — they craft the kind of experiences that have revolutionized entire industries. The diverse collection of our people and their ideas inspire innovation in everything we do. Imagine what you could do here! The Apple Services Engineering (ASE) team builds and provides systems and infrastructure that fuel Apple's Services. These are the people who power the App Store, Apple TV, Apple Music, Apple Podcasts, Apple Books, and more. And they do it on a massive scale. They consistently exceed Apple’s high standards with high-performance solutions, delivering a diverse array of products in over 35 languages to more than 150 countries. The ASE Production Support Engineering team is looking for an Escalation Engineer for troubleshooting, tracking, and resolving technical issues. This Engineer will play a vital role in technical troubleshooting for Apple’s customers, internal business partners, and strategic partners for all of Apple’s Media Services.

Description

As a vital member of an exceptional global team, you will play a key role in Tier 4 support, addressing technical issues for customers, internal business partners, and strategic partners. Your responsibilities will include efficiently triaging issues, evaluating their impact, delving into server logs, replicating problems, capturing device logs, and methodically determining root causes. Collaboration with diverse engineering teams to prioritize and resolve issues will be a central aspect of your role. Acting as the problem manager for top issues, you'll communicate updates and estimated time of resolution to a broad audience, including senior leadership. In addition to driving issue resolutions, you will contribute to the enhancement of operational efficiency. This involves developing exceptional tools, documentation, and refining processes to elevate the quality and speed of issue handling. Furthermore, your commitment extends to participating in On-Call duties and assisting during spikes in issues or when faced with time-critical situations.

Minimum Qualifications

• Proven track record in solving problems within complex distributed applications
• Proficiency in scripting, such as Python, and server-side programming languages, such as Java.
• High logical and critical thinking skills
• Demonstrated expertise in analyzing client and server-side logs
• Strong knowledge of SQL, relational database systems, and/or distributed SQL query engines (such as Oracle and Trino)

Preferred Qualifications

• Experience with log analysis tools, such as Splunk, is a huge plus
• Experience in Charles Proxy or Wireshark and Sysdiagnose is a plus.

Responsibilities:

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in electronics product manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are a looking for a Application Engineer (BMS/EPMS) to make an impact!

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Leading the Deployment of Application for Building Management System / Electrical Power Management System
• Lead technical discussion and clarification with the customer acting as key contact person for all technical related topics. Under Project Manager leadership monitor engineering deliverables and progress through continuous communication with team members and perform regular technical status reports.
• Take active part in meetings with the customer. Prepare and conduct Factory Acceptance Tests (FAT) with the customer.
• Perform and get customer approval on basic and detailed design of integrated solutions in line with the contract (technical, time & performance requirements) and leveraging Schneider Electric portfolio of products and systems, maximize project profitability and manage technical risk.
• Ability to work independently while also collaborating with global teams and complying to global standards.
• Produce engineering outputs such as System architecture, sub-systems interfacing points, detailed point schedules, control panel drawings, equipment and control valve schedules, description of operations, database generation, graphics development, system hardware and software configuration and programming, etc. Proposal of HVAC and EMS controls strategies in various application.
• Master all technical aspects of the Project: design, integration, testing, FAT, installation, commissioning, warranty. Validate technical choices compliance with the design (based on Technical Design Process).
• Manage stakeholders involved in the execution.

What qualifications will make you successful for this role?

• Degree in Engineering or its equivalent discipline
• 5 years leading technical projects or as Solution Application Engineer
• 5 years in his technical field of expertise (PLC/ DDC, SCADA Systems)
• Knowledge of data center and/or other mission critical facilities design, operation and maintenance.
• Proven ability to lead with agility functional and remote technical team having different fields of expertise
• Proficiency in Programmable Logic Controller, SCADA and DDC Controllers (preferably in Schneider brand) development and implementation for redundant system architectures on HVAC applications including chiller systems
• Knowledge of HVAC applications including Chiller Systems, Air Handling Units, Fan Coil units, Computer Room Air Handlers, Mechanical ventilation units, Sanitary and Plumbing, Fire Alarm, Low voltage and Medium/High Voltage Electrical systems and other miscellaneous systems.

What’s in it for me?

• Global family leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership

…and more!

Let us learn about you! Apply today.

Job Description:

• Preparation of project documentation e.g. tender, quotation, progress claims, drawings, checklist, etc
• Responsible for site coordination and supervising to ensure projects are completed according to schedule.
• Liaise closely with clients, consultants, and suppliers on all project-related matters.
• Attend site walks, meetings, and site inspections when required.
• To carry out technical support functions in mechanical engineering work on site.
• To ensure effective project management on design, installation, testing, commissioning, servicing, and maintenance activities.
• Attend meetings, and prepare project schedules and progress reports.
• To ensure smooth and timely delivery of the project.
• Any other duties as assigned by superior.
  

Job Requirements:

• At least a Diploma in Mechanical Engineering or its equivalent.
• Minimum 3 years of relevant working experience in M&E or the construction industry.
• Possessing relevant safety certificates is an advantage.
• Knowledge of equipment installation, testing & commissioning, and troubleshooting as per M&E drawings or engineering specifications.
• Ability to work independently and under pressure to meet tight project schedules.
• Willing to travel & based at the project site.
• Have knowledge of AutoCAD & Microsoft Office.
• Candidates without experience but with relevant qualifications will be considered as well.
  

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Bachelor Degree in Engineering or relevant field
• Experiences of (small-scale) simulations of air pollutant dispersion, meteorology modelling, data processing
• Demonstrating as a fast learner of conducting literature study and literature summary
• Experiences of handling big data via R, Python, Matlab, etc.
• Experience with UNIX-based operating systems and bash script or similar
• Strong interests in applying machine learning models and applications to atmospheric research
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

About the role

We are looking for a LEAN Programming Engineer to take a hands-on implementation approach in designing, implementing, and optimizing our theorem-proving AI system. You will contribute to research and development of critical components of our AI architecture: (a) formalizing mathematical, scientific and engineering problems into a domain knowledge model and representation, and (b) independent validation of outputs via formal verification systems. The ideal candidate will have a strong background in functional programming languages, which we believe is the foundation for developing a logical reasoning AI system. We are especially interested in candidates who have worked in developing and using automated theorem provers, formal verification systems or applications, and symbolic computation/algebra systems extensively. A strong academic or research foundation in logic systems (higher/first-order logic, etc.) will be invaluable.

KEY RESPONSIBILITIES

▪Implement and optimize algorithms for automated theorem proving, including but not limited to, proof search, term rewriting, and logical inference.

▪Incorporate advanced mathematical concepts and formal methods into the design and development process.

▪Utilize knowledge of various logic systems and frameworks such as HOL, FOL, DL, Modal Logic, and Temporal Logic in algorithm development.

▪Leverage Computer Algebra Systems (CAS) such as Mathematica, Maple, SageMath, Maxima, or SymPy for symbolic computation and algebraic manipulation.

▪Collaborate with AI researchers and mathematicians, and other engineers to write good quality code and ensure seamless integration and interoperability of different system modules.

MUST-HAVE QUALIFICATIONS

▪Masters / Ph.D. in Computer Science or Mathematics (or Advanced Master’s degree)

▪6+ years experience in at least one of Lean, Coq, Agda, or Isabelle.

DESIRABLE SKILLS

▪Strong understanding of functional programming principles and paradigms.

▪Familiarity with automated theorem proving techniques and tools.

▪Knowledge of formal methods and formal verification.

▪Understanding of category theory, type theory, or other advanced mathematical concepts.

▪Familiarity with logic theories such as Higher-Order Logic (HOL), First-Order Logic (FOL), Description Logic (DL), Modal Logic, and Temporal Logic.

▪Understanding of algebraic structures and symbolic computation.

▪Experience with AI and machine learning frameworks is highly desirable.

▪Contributions to open-source projects in the functional programming, AI, or formal verification communities.

Hummingbird Bioscience is firmly committed to Equal Employment Opportunity (EEO) and to compliance with all Singapore and US federal, state and local laws and/or guidelines that prohibit employment discrimination on the basis of age, race, color, gender, sexual orientation, gender identity, ethnicity, national origin, citizenship, religion, genetic carrier status, disability, pregnancy, childbirth or related medical conditions, marital status, protected veteran status and other protected classifications.

A world empowered by autonomy. We build robotic vehicles to improve logistics safety, forge a greener Earth, and enhance human lives.

We are a closely-knit team aspiring to change the world through disruptive technology. We are innovators. We are tinkerers. We are problem-solvers. And we have a fair amount of magic dust up our sleeves. We have a plan for fleet-level deployment of autonomous vehicles, and we are looking for the best-of-the-best to join us in making this a reality.

About Venti Technologies

Based in the U.S. and Asia, Venti Technologies is the leader in safe-speed autonomous logistics systems, developing the future of goods transportation. Using rigorous mathematics, deep learning, and theoretically-grounded algorithms, Venti has a proprietary collection of autonomy technologies including a suite of powerful logistics algorithms. Venti’s proven value proposition of saving costs, increasing vehicle utilization, and improving safety is recognized by customers and driving growth. Launched in 2018, Venti brings together an unsurpassed team internationally. The company has autonomous systems deployed in Asia for industrial and logistics sites and a growing pipeline. Venti has offices in Cambridge (Massachusetts, USA), Suzhou (China), and Singapore – our Asian headquarters.

This is a new role within our Operations Team where you will be responsible for autonomous vehicle operations in our customer sites where you will be responsible for Remote Vehicle Operations, Maintenance and Systems testing. where you will be cross-deployed to both the testing and operations team. This role will operate on a shift-based schedule. You will play a crucial role in ensuring the safe and efficient operation of autonomous vehicles, monitoring and controlling real-time vehicle operations, conducting general maintenance and executing testing procedures.

On a day to day, you will be collaborating with cross-functional teams while integrating new technologies, troubleshooting technical issues and contributing to continuous improvement initiatives. Your expertise will be vital in the success of maintaining compliance with safety regulations, optimizing vehicle performance, and fostering innovation in autonomous vehicle operations.

Role responsibilities

Vehicle Maintenance and Testing.

• Conduct diagnostics and maintenance on autonomous vehicles.
• Collaborate with engineering teams to integrate new technologies and features into autonomous vehicle systems.
• Execute testing procedures for autonomous vehicle systems in an operational environment.
• Provide technical support to on-site and remote teams during autonomous vehicle operations.
• Troubleshoot and resolve technical issues promptly to minimize downtime.

Operations Control:

• Monitor and control the real-time operations of autonomous vehicles.
• Execute and manage autonomous vehicle operations to ensure safe and efficient performance.
• Respond promptly to system alerts and emergencies, taking corrective actions as necessary.

Shift Operations:

• Work on a shift-based schedule to ensure 24/7 coverage for autonomous vehicle operations.
• Collaborate with cross-functional teams to maintain continuous and reliable system functionality during all shifts.

Safety and Compliance:

• Ensure strict adherence to safety protocols and compliance with regulatory requirements.
• Collaborate with safety and compliance teams to implement and maintain best practices.

Required experience

• Diploma in relevant field or equivalent experience.
• Proven experience in vehicle/transport operations and testing.
• Strong analytical and problem-solving skills.
• Experience with vehicle/transport technologies and systems.
• Hands-on experience in mechanical systems and electrical/electronic wiring
• Hands-on experience with Linux OS environment.
• Knowledge and background in Robotics/Automation.
• Hands-on experience in Bash, Python, C++ and ROS is a plus.
• Possession of a Class 3 Driving licence is a plus.
• Excellent communication and collaboration skills.
• Ability to adapt in a shift-based and 24/7 working environment.

Salary is commensurate with experience. We also offer world-class benefits, fantastic culture, flexible working arrangements, and a great international working environment. Come and join us!

Rapsodo Inc. is a sports technology and analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping golfers of all abilities, including PGA professionals, to optimize their launch conditions, to allowing MLB pitchers to increase the efficiency on their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1,000 NCAA athletic departments.

We are seeking a highly skilled and experienced Senior Engineer, Perception, to lead the development and implementation of our cutting-edge perception systems focused on tracking multiple objects using camera and radar technologies. This role is critical to advancing our capabilities in object detection and tracking, contributing directly to the success of our innovative projects.

Key Responsibilities

• Lead the development of advanced perception systems for real-time, multi-object tracking using camera and radar data.
• Innovate and improve camera pipeline processes to enhance image quality and system performance.
• Design and implement sensor fusion algorithms to accurately integrate data from radar and camera sensors.
• Apply deep learning and computer vision techniques to improve detection and tracking accuracy.
• Develop and optimize tracking algorithms, including Kalman filters and Multiple Hypothesis Tracking (MHT), for enhanced tracking performance.
• Collaborate with cross-functional teams to ensure seamless integration of perception systems into the overall project architecture.
• Provide technical leadership and mentorship to junior engineers, fostering a culture of innovation and excellence.
• Stay updated with the latest advancements in perception technology, applying cutting-edge research to practical applications.

Skills & Qualifications

• Advanced degree (MS or PhD) in Computer Science, Electrical Engineering, Robotics, or a related field.
• A minimum of 10 years of experience in perception system development, with a focus on multi-object tracking using camera and radar technologies.
• Deep understanding of computer vision, signal processing, and sensor fusion.
• Proven experience in designing and implementing deep learning models for computer vision applications.
• Expertise in developing and optimizing camera pipeline and tracking algorithms, such as Kalman filters and MHT.
• Proficiency in programming, particularly in C/C++.
• Exceptional analytical and problem-solving skills, with the ability to lead complex technical projects.
• Strong communication and teamwork skills, with a track record of successful cross-functional collaboration.

If you are excited about the prospect of contributing to a dynamic, innovative, and driven environment while also being able to work independently, we invite you to submit your application.

Get to Know the Team

As a Lead Engineer in our team, you would architect, implement, and roll out our next generation of Grab platform for merchants.

Get to Know the Role

The Business Platform tech family is an engineering team which is responsible for multiple key products for Grab Merchant Partners (e.g GrabMerchant App, GrabMerchant Portal). We are running on a micro-service architecture in backend and are also providing multiple frontend techniques (e.g. IOS, ADR, Flutter, Web) for our end users (e.g. Merchants, to-B partners) across 7 countries. We are aiming to provide a high quality, stable, and efficient platform for merchants, and extend our platform to support offline transactions for merchants.

You are expected to understand the requirements from different partners, and work with the team to design and improve the system architecture which could adapt to multiple business flows, and also serve high throughput (thousands of QPS) at millisecond latencies. You will report to the Senior Engineering Manager and be based onsite in our Singapore One North Office.

The Critical Tasks You Will Perform

• Develop APIs, interfaces, and database schemas to ensure scalability, maintainability, and performance across the Business services domain.
• Design, implement, instrument, and deploy available services with tight Service level agreements, and champion for operational excellence across projects.
• Collaborate with partners across teams and roles, to resolve ambiguous, multi dimensional business, legal, and product needs to ensure Business Platform architectures are not just performant and usable, but also compliant.
• Lead architecture reviews, code reviews, design reviews, postmortems, and improve for engineering best practices across teams and tech families.
• Identify process gaps and establish engineering processes — project management, collaboration, code quality.
• Mentor and be a role model for junior engineers.
• Participate in interview loops to help Grab continue hiring top industry talent.

Qualifications

What Essential Skills You Will Need

• 7+ years of relevant experience.
• Prior experience designing, implementing and maintaining critical backend services with tight SLAs, at scale.
• Proficient in at least one programming language for backend services Go, Java or C++.
• Knowledge in distributed systems design and internals.
• Prior experience with any / all of Kafka, ElasticSearch, Redis, MySql, Aurora, and managed cloud services (specifically, AWS and Azure).
• Experience approaching a problem from different angles, analyzing pros and cons of different solutions.
• Strong written and verbal communication skills in English.

As a Quality & Reliability Assurance Engineer in Global Quality, we are encouraged to conduct electrical failure analysis and data analysis of next-generation 3D NAND memory devices. To sustain and improve Micron's memory quality, and developing outgoing monitor strategies together with risk assessment and product disposition in deviation management in HVM (high volume manufacturing( environment.

Responsibilities and Tasks

• Develop outgoing quality and reliability monitor strategies of NAND products in production phase.
• Perform product failure analysis on rejects to identify the failure mode and mechanisms that will lead to successful corrective actions and/or preventive actions.
• Assist and consult on post qualification quality and reliability issues and assist in the analysis and disposition of these materials.
• Coordinate with Research and Development and Product Engineering teams to comprehend new reliability issues and how to test for and assess their impact to customer risk and reliability.

Requirements

• Excellent problem-solving and analytical skills with strong attention to details.
• Ability to communicate clearly and concisely both verbally and in writing is essential in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work optimally in cross-functional teams and handle pressure situations in a professional manner.
• Candidates with at least 2 years of experience in the semiconductor industry as QRA or Product Engineer are preferred but fresh graduates are welcomed to apply. Experience in flash memory debugging and failure analysis is a plus.
• Bachelor's or Master's degree Electrical Engineering, Electronics Engineering, or a related discipline.

• Participate in research and analysis to identify project requirements, conceptualizing plans, designing, and developing systems, establishing guidelines and goals, and creating strategy to optimize operational activities for new product introduction.
• Work with Engineering, Quality, Commodity and NPI to ensure success in new product development and launch.
• Manage and coordinate in earlier supplier involvement in new product introduction from part design phase through mass production, ensure critical timeline and target COSS are met.
• Ensures that Cost, Quality and Availability are achieved for product development phase and through their full life cycle.
• Manage supplier onboarding process and selection with integrity, alignment across value-chain and value engineering.
• Manage cost activities.
• Responsible in ensuring best-in-class cost, thru negotiation and/or tear down activities.
• Identifies cost drivers to influence design decision making towards target costing.
• Ensure product/module cost models and quotes are up to date at launch and effectively rolled out.
• Reviews and negotiates supplier terms and conditions exceptions to mitigate risk.
• Supports price negotiations with opportunities to drive short- and long-term cost reduction improvement.
• Builds strong, value-added relationships with suppliers, internal customers, and cross functional departments.
• Collaborates with Supplier Quality in the new supplier/component release process, including compliance and sustainability aspects.
• Partners Category team, ensuring BU product requirement and supplier technology alignment are included in building Commodity Strategy. Supporting and executing category strategy.
• Analyze lead times, identify critical paths, and prioritize demand requirements.
• Participates in project meetings/brainstorming sessions to identify solutions available.
• Performs other duties as assigned.