JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

As a Salvage engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to repair the ship's plant and get the systems up and running again. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, provide support to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager in the selection of new salvage equipment and setting up the right maintenance procedures.
• Maintaining company owned salvage equipment.
• Sharing knowledge with other engineers about complex ship's systems.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities
To make your mark as a salvage engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• A minimum degree in any field with experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Willingness to work on weekends and public holidays frequently, with OT and allowances compensated.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Purpose

To independently handle the piping activities, prepare, manage, and produce the critical engineering deliverables for the assigned project (that may include short-term assignment to Construction, Commissioning, and Offshore) effectively and efficiently according to the specified technical requirements, timelines and within budget, and deal independently with and resolve all the issues of the project.

Core Responsibilities

Works independently to perform the assigned task and develops a solution to technical/engineering and related problems by analyzing the issue or data, interpreting the analysis, and evaluating various options/measures using experience, precedents, and professional references with minimal or no supervision or guidance.

Understands technical requirements of project specifications and standards, local statutory and regulatory requirements, Classification society requirements, and applicable codes and standard industry practices to carry out the piping activities and prepare piping deliverables for assigned projects.

Carries out the pipe wall thickness calculations using applicable design code.

Prepares the piping material specification, valve specification, piping design specification, criteria for pipe supports, and pipe support specification by using and modifying the MODEC corporate specifications suitably to match the project-specific requirements.

Prepares piping fabrication specification, piping insulation specification, and flange management specification (bolt torquing and tensioning) by using the MODEC corporate specifications and modifying these to meet the project requirement.

Prepares bill of materials for piping bulk items (like pipe, flanges, and fittings), valves, piping specialty items, gaskets, stud bolts and nuts, and pipe support materials.

Provides piping weight inputs for weight control reports.

Prepares data sheets for process-critical and non-critical piping specialty items obtaining the process parameters required for designing and manufacturing process-critical items.

Prepares requisitions for piping bulk items, valves, piping specialty items, gaskets, stud bolts and nuts, spring supports, cargo tank heating coil (marine), and valve remote control system (marine) and performs a technical evaluation of bids received from various suppliers to ensure shortlisted vendors meet technical requirements as per project specifications, and provides an assessment on technically acceptable bids for Buyer to follow up tender evaluation further to conclude and award the purchaser order.

Conducts kick-off meetings with successful suppliers to ensure a clear understanding of scope supply, technical requirements, documentation, and delivery conditions to enable the supplier to execute the work strictly as per purchase order, reviews supplier drawings / documents, and shares the relevant data with engineering contractor to get it incorporated in piping layout design.

Works closely with suppliers/contractors concerned to resolve technical issues, and visits supplier’s manufacturing facilities to witness the FAT, where necessary.

Provides technical support and advice to construction yard and commissioning work at the site. Where necessary, provides off-site support and advice.

Supports the Lead Piping Engineer and assists in preparing lessons learned during the course of execution of the project for further processing through MIMS.

Shares the knowledge and experience with team members and guides the engineers in carrying out the assigned task in right and efficiently.

Job Challenges and Problem-Solving

Independently handles technical/engineering matters and provides a solution to issues without affecting the quality of work and not impacting the project schedule.

Works within available resources and constraints, meeting stringent timelines while maintaining compliance with project specifications and requirements.

Satisfying the requirements of internal stakeholders, such as Construction, Quality, and HSE, as and when arises.

Need disciplined in planning and managing the time to meet the schedule while carrying out the assigned work.

Focus on Quality deliverables and Product Quality

Job Responsibilities

• Design of plastic and metal parts for electronic boxes using 3D CAD
• Conduct rapid prototyping and rapid testing to validate design requirements
• Perform design trouble shootings and design solution implementations
• Support parts fabrication, product assembly and production processes
• Generate technical drawings, design reports, test plans and technical documentation

Requirement

• Familiar with various 3D printing technologies
• Familiar with designing of mechanical tests for design verifications
• Familiar with plastic molding and metal fabrication processes

Apply now and be a part of a team where your skills, ideas, and expertise truly make a difference! Send your CV to [email protected] for a confidential chat.

PS: However, only shortlisted candidates will be notified.

EnviroDynamics Solutions Pte Ltd | EA License No.: 12C6285

Xie Jiani | EA Personnel Reg No.: R1548854

Job Description:

• Manage customer’s RFQ, review quote package
• Collaborate with customers and internal resource to define requirements
• Generate accurate and detailed quote summary for review
• Apply work knowledge to improve quote formats and output efficiency

Job Requirement:

• Diploma / Higher Nitec, preferably in Mechanical or Precision engineering.
• Preferably with 5 years experiences in precision machine shop environment.
• Must be able to interpret technical drawings, BOM and GD&T.
• Review material specifications, surface coating and material pre/post treatment
• Familiar with CNC metal machining process like turning and milling etc.
• Meticulous and excellent with details
• Pleasant personality and able to communicate well with customers for their request.
• Well verse in Microsoft WORDS and EXCEL.

We are looking for Service Engineers for commissioning, troubleshooting and repair of marine/ship propulsion equipment. Qualified candidates should have hands-on experience with assembly and repair of heavy mechanical equipment, and/or familiar with marine electronics and automation systems.

Responsibilities and Duties:

· Complete repair and installation work

· Perform Maintenance and service work

· Determine the extent of damage and repairs in case of warranty

· Identify the causes and undertake error diagnostics for propulsion systems with mechanical, hydraulic, pneumatic

and electrical components

· Carry out modifications with ease and confidence

You should be prepared to work in a shop environment, in shipyards or on board of ships.

International traveling in the region is required. You should be able to handle work situations under time constraint, acting as the on-site expert with our customers.

Suitable candidates should hold an engineering degree in the fields of mechanical, marine, automation and electronics or mechatronics engineering. Candidates with equivalent professional background will be considered.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Senior QA Engineer (Automation Testing)

Internal Code: A24048

What will you do?

• Develop and execute test plans, test cases, and test scripts to ensure the quality and reliability of mobile application and web application
• Collaborate with software developers, project leads, and others to understand the requirement and identify test scenarios
• Perform manual and automated testing of mobile application and web application, including functional, regression, and sanity testing
• Design and implement test automation framework and tools to improve testing efficiency
• Identify, document, and track software defects and work closely with development teams to ensure timely resolution.

What are we looking for?

• Proven experience as QA Engineer or Software Tester, with solid understanding of software testing methodologies and practices.
• Strong knowledge of testing techniques, tools, and frameworks, including manual and automated testing.
• Experience in writing test automation using test automation tools such as Selenium, Appium.
• Experience in testing mobile application and web application
• Experience running automated testing using device farms is a plus
• Proficiency in writing clear, concise, and comprehensive test plans and test cases
• Excellent analytical and problem-solving skills, with attention to detail
• Ability to work independently and in a team environment.
• Experience with python is a plus

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• To lead the process and mechanical design of the assigned project related to Industrial water and wastewater treatment plant design.

• Ensure the timely submissions / approvals of the designs and best quality work for utmost client satisfaction. Also ensure the designs are optimized for the cost and timely completion.

• Ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.

• Coordinate with the supporting team (Process/ Mechanical / Piping / E&IC) to ensure all engineering documents and deliverables are prepared accurately and within the desired schedule.

• Work closely with Gradiant Proposal/ NPI (R&D) to understand Gradiant's suite of proprietary technologies and transition to commercial applications.

• Work with NPI to understand project specific Heat & Mass Balance and translate to create system PFD's

• Prepare and review the project documentation including PFD, P&ID, General Arrangement, Equipment - Calculations/ Datasheets / Specifications, BOO, BOM, RFQ packages, GA & Manufacturing drawings, Operation & Maintenance Manuals.

• Size and selection of system components including but not limited to Pressure vessels, Heat Exchangers, Tanks, pumps, blowers, piping, valves and instrumentations.

• Ensure process and equipment designs as per the membrane, resin, and equipment supplier's guidelines to ensure the process guarantee meets the contract commitment.

• Be able to identify and provide necessary solutions for the technical issues related to process design and engineering in the field of water and wastewater treatment plant design.

• Be able to work through problems from a technical and practical prospective, while maintaining cost controls.

• Work with outside vendors and purchasing to select and establish equipment component specifications, material take-offs, requisitions and vendor orders while coordinating cost control, project schedule and manufacturing efforts.

• Have good organizational and communication skills

• Support Gradiant Subsidiaries across the globe as required.

• Support Proposal, NPI, Project & Operation (Site installation/ Commissioning/O&M) as required.

Job Description:

• Manage customer’s RFQ, review quote package
• Collaborate with customers and internal resource to define requirements
• Generate accurate and detailed quote summary for review
• Apply work knowledge to improve quote formats and output efficiency

Job Requirement:

• Diploma / Higher Nitec, preferably in Mechanical or Precision engineering.
• Preferably with 5 years experiences in precision machine shop environment.
• Must be able to interpret technical drawings, BOM and GD&T.
• Review material specifications, surface coating and material pre/post treatment
• Familiar with CNC metal machining process like turning and milling etc.
• Meticulous and excellent with details
• Pleasant personality and able to communicate well with customers for their request.
• Well verse in Microsoft WORDS and EXCEL.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

What you'll do: 

• Assist QP(S) in the daily supervision and coordination duties including civil (drainage, road) and structural works, site investigations, building works, etc, 
• Lead, monitor and supervise RTOs on Site
• Responsible for the consistency of quality assurance inspections and testing for works
• Attend site meetings and resolve technical issues with Contractor
• Keep quality records of all works, monitor & report on work progress
• Review and comment on contractor’s submissions
• To review and supervise safety, environmental and health matters

Job Responsibilities:

• Provide engineering expertise support to the Singapore Manufacturing Complex for safe and reliable operations
• Responsibilities include engineering assessments, engineering design, troubleshooting, root cause failure analysis & solutions and long-term equipment improvement initiatives
• Provide engineering expertise support for project developments, Factory Acceptance Tests & Site Acceptance Tests in the Singapore Manufacturing Complex
• Support maintenance & inspection work during major shutdown
• Engineering point of contact to assigned process unit
• Provide engineering expertise training within organization

Job Requirements:

• Bachelor Degree in Electrical Engineering (major in Power Engineering) or equivalent
• Experienced in equipment engineering specifications and familiar with industrial standards & local codes
• High analytical capability & commitment to high standard in resolving engineering issues
• Adaptable, good interpersonal skills & effective team player with good communication skills to work in cross functional organization

Job Description:

• Be Involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure worksare constructed as per project & safety requirement
• Supervise site works
• Liase with clients on site works / project
• Other adhoc duties as assigned

Requirement:

• Degree in Civil Engineering / relevant
• Able to lead and work independently
• MS OFFICE, AutoCAD
• Good Communication Skills

You may send your resume / CV to email address directly: [email protected]

Job Summary:

• Salary $2,800 - $3,000
• 5 days Work Week: Mon – Fri; 8:30am – 5:30pm
• One Sat a month: 8am – 12noon
• Location: Pioneer
• VB + PB

Job Responsibilities:

• To carry out engine repair work, engine testing, engine commissioning or any troubleshooting works for power generation engines (Land & Marine) & Main propulsion engines.
• To carry out other Mechanical repair & troubleshooting works such as MHI Deck crane, Mooring Winches, Kamome Propeller & Thruster, Kawasaki Thruster.
• To provide a service report with necessary recommendations & findings.
• To provide technical support for site engineers whenever necessary.
• To provide technical support to customers whenever necessary.

Additional Information:

• Diploma/Degree in Mechanical Engineering; Fresh Graduates are welcomed
• Can read & understand basic Mechanical diagrams
• Able to travel (Anchorage/Overseas) by flight or by sailing with the vessel.
• Able to work outdoors & onboard vessels and stations overseas.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Ong Xinyu Charmaine
Registration Number: R24122875
EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

Job Description

• Site project management
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operation, site coordination, monitoring and reporting work progress
• Other adhoc duties as assigned

Requirements:

• Bachelor Degree of Civil Engineering/Geology or relevant vocational certificate
• Able to speak and written English and Chinese in order to communicate effectively with Chinese speaking client and associate.
• Knowledge of geotechnical engineering or soil data interpretation or Singapore Geology
• A good team player, Self-Driven and willing to take responsibility for assigned tasks as project engineer / manager
• Preferably Engineer specialized in Engineering/Civil/Construction/Structural or equivalent

You may send your resume / CV to email address directly: [email protected]

Job Description

The successful candidate will be based in Singapore and its responsibilities include service management, vendor management, product deployment, administration, and support escalation of enterprise storage infrastructure across multiple countries. The role requires collaboration with architecture and technology teams to engineer and deliver innovative storage solutions to accelerate technology transformation.

Responsibilities

· Provide operational support for the storage infrastructure, including service management, vendor management, lifecycle management, product deployment, administration, and support escalation of enterprise storage systems from Huawei, Hitachi, Dell EMC, NetApp, HPE, IBM and Brocade.

· Partner with infrastructure and application teams to deliver storage solutions, projects, and drive migration to strategic storage platforms.

· Take ownership of storage related incidents till resolution with impact analysis, root cause analysis and preventive measures. Ensure problem tasks are timely closed.

· Lead and review storage system changes to ensure smooth execution and compliance to the change management framework.

· Conduct performance analysis, tuning, automate system operations, and capacity planning.

· Perform proactive review of processes, improve, automate, and harmonize them.

· Conduct deep dive analysis of operational issues, identify improvements to mitigate risks, and develop appropriate control measures.

· Coordinate the execution of periodic controls and reviews, including the development of metrics, reports, and standards.

· Support audit and compliance activities, manage department corrective actions, provide input to the risk assessment process.

· Participate in morning coverage, weekend work, DR tests, bank-wide maintenance activities, etc.

· Able to support and respond to ad-hoc requests from time to time including outside of office working hours.

Qualifications

· Qualifications, Skills and Experience Essential

· Bachelor’s degree and/or equivalent experience in Information Technology, Computer Science or Information Systems.

· At least 10 years’ experience working in a storage environment with understanding of service and project management.

· Extensive experience in IT infrastructure concepts and solutions.

· Strong working knowledge of enterprise SAN / NAS storage technologies from Huawei, Hitachi, Dell EMC, NetApp, HPE, IBM and Brocade.

· Working experience in scripting and automation.

· Working knowledge of virtualization technologies (e.g., VMware, Hyper-V), Windows, Linux, Vx-Rail, PowerMax

· Knowledge of automation tools, scripting such as Ansible, Terraform.

· Platform performance management and capacity planning.

· Extensive experience of investigating and managing infrastructure related incidents.

· Excellent product management experience.

· Strong knowledge of cyber-security, data security best practices and compliance requirements related to Storage and Backup.

Personal Characteristics

· Excellent communications skills with the ability to explain complex technological ideas and concepts in a way that is understandable to a non- technical audience.

· Strong sense of personal accountability in providing efficient end-to-end delivery with a high focus on costs.

· Highly motivated, result oriented, attention to details, ability to work independently with a high sense of integrity, flexibility, and urgency.

· Ability to manage multiple assignments while keeping the focus and meeting key goals.

· Ability to build and maintain partnerships.

· Extensive experience in collaborating with vendors, professional services, and providers.

· Excellent team player with strong interpersonal and communication skills.

Description

The successful candidate will be based in Singapore and its responsibilities include service management, vendor management, product deployment, administration, and support escalation of enterprise storage infrastructure across multiple countries. The role requires collaboration with architecture and technology teams to engineer and deliver innovative storage solutions to accelerate technology transformation.

Responsibilities

· Provide operational support for the storage infrastructure, including service management, vendor management, lifecycle management, product deployment, administration, and support escalation of enterprise storage systems from Huawei, Hitachi, Dell EMC, NetApp, HPE, IBM and Brocade.

· Partner with infrastructure and application teams to deliver storage solutions, projects, and drive migration to strategic storage platforms.

· Take ownership of storage related incidents till resolution with impact analysis, root cause analysis and preventive measures. Ensure problem tasks are timely closed.

· Lead and review storage system changes to ensure smooth execution and compliance to the change management framework.

· Conduct performance analysis, tuning, automate system operations, and capacity planning.

· Perform proactive review of processes, improve, automate, and harmonize them.

· Conduct deep dive analysis of operational issues, identify improvements to mitigate risks, and develop appropriate control measures.

· Coordinate the execution of periodic controls and reviews, including the development of metrics, reports, and standards.

· Support audit and compliance activities, manage department corrective actions, provide input to the risk assessment process.

· Participate in morning coverage, weekend work, DR tests, bank-wide maintenance activities, etc.

· Able to support and respond to ad-hoc requests from time to time including outside of office working hours.

Qualifications

· Qualifications, Skills and Experience Essential

· Bachelor’s degree and/or equivalent experience in Information Technology, Computer Science or Information Systems.

· At least 10 years’ experience working in a storage environment with understanding of service and project management.

· Extensive experience in IT infrastructure concepts and solutions.

· Strong working knowledge of enterprise SAN / NAS storage technologies from Huawei, Hitachi, Dell EMC, NetApp, HPE, IBM and Brocade.

· Working experience in scripting and automation.

· Working knowledge of virtualization technologies (e.g., VMware, Hyper-V), Windows, Linux, Vx-Rail, PowerMax

· Knowledge of automation tools, scripting such as Ansible, Terraform.

· Platform performance management and capacity planning.

· Extensive experience of investigating and managing infrastructure related incidents.

· Excellent product management experience.

· Strong knowledge of cyber-security, data security best practices and compliance requirements related to Storage and Backup.

Personal Characteristics

· Excellent communications skills with the ability to explain complex technological ideas and concepts in a way that is understandable to a non- technical audience.

· Strong sense of personal accountability in providing efficient end-to-end delivery with a high focus on costs.

· Highly motivated, result oriented, attention to details, ability to work independently with a high sense of integrity, flexibility, and urgency.

· Ability to manage multiple assignments while keeping the focus and meeting key goals.

· Ability to build and maintain partnerships.

· Extensive experience in collaborating with vendors, professional services, and providers.

· Excellent team player with strong interpersonal and communication skills.

Job Purpose

Provide strong technical expertise and leadership in Process Development of project transfer. Responsible for the overall development of the Molding process. Work closely with team to ensure successful implementation of project. Lead and/or support the team for transfer I development, equipment design, processes optimization and qualifications efforts. To ensure compliance to ISO/FDA, cGMPs, HSE regulatory requirements.

Accountabilities

• To lead the Molding process development aspects of project implementation to deliver results within projected timeline, excellent execution and documentation.

• To lead user requirement specification (URS) development for processes equipment and liaise with vendors on technical discussion.

• To lead design reviews for processes equipment and work with global/ R&D team to develop and transfer the technology to site.

• To develop and execute equipment and processes validation approach / plan.

• To lead and execute new equipment and processes installation, optimization, commissioning, qualification and validation.

• To proactively communicate project progress, key issues and any other critical topics in a timely manner to the appropriate management level and vendors.

• To ensure compliance to cGMPs, IS013485 / FDA, HSE, and policy requirements.

Requirements

• Education: Minimum Diploma in Engineering (Mechanical, Electrical, Automation)or relevant discipline or equivalent.
• Experience: 5-10 years working experience in contact lens or optical device manufacturing or similar environment.
• Good understanding of processes automation system, vision inspection system, robotics and GMP/GDP requirement.
• Good analytical and troubleshooting skill with systemic approach.
• Good leadership and management skills.

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Lead all aspects of electrical controls, power and instrumentation systems related to the equipment and machinery.
• Be responsible for the design and technical support of all hardware, software, instrumentation and controls elements as part of an integrated system.
• Identify, create and support project documentation including, but not limited to HMI, PLC programing, power distribution, control/signal wiring, wireless technology, cabinet/panel design, BOM and layout drawings to corporate standards.
• Develop instrumentation specifications as related to process requirements and control schemes.
• Support engineering, project management and deployment groups to identify and resolve technical issues.
• Provide technical direction as required.
• Work with outside vendors and purchasing to select and establish equipment component specifications, material take-offs, requisitions and vendor orders while coordinating cost control, project schedule and manufacturing efforts.
• Have the ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.
• Must be able to work through problems from a technical and practical prospective, while maintaining cost controls.
• Have good organization and communication skills.
• Have the ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.
• Must be able to work through problems from a technical and practical prospective, while maintaining cost controls. Ø Prepare, check, and issue instrument schedule and list, including document index, instrument index, I/O list, cable schedule, interconnection wiring drawings, termination drawings, junction box schedule, instrument hookup drawings, and material take off.
• Check and issue block diagrams, control/rack room layout, cable route, instrument location plan, DCS, SIS, BMS systems loop drawings, instrument hook-up details, and instrument sizing and calculation.
• Prepare and issue instrument data sheets for control valves, on-off valves, PCVs, MOVs, PSVs, and other field instruments. Ø Guide designers to prepare drawings.
• Coordinate requirements with other disciplines.
• Work with Project Managers and other team members

Skills & Experiences required:

• Bachelor’s degree in engineering or related field with 10+ years of experience in system controls, instrumentation and wiring.
• Wastewater, Chemical Processing and/or Oil & Gas systems experience is preferred.
• Experience designing PLC & control panels, PLC and HMI programming is preferred.

Must possess in depth knowledge of Automation programmable controller hardware, automation software and AC Drives

Knowledge of Microsoft Office and AutoCad

Key Responsibilities:

1. Full Stack Development:

· Design and implement user-friendly web interfaces using modern frontend and backend technologies (e.g., NodeJS, React, Angular).

· Collaborate with UX/UI designers to create responsive and visually appealing applications.

· Optimize web applications for performance, scalability, and maintainability.

1. DevOps:

· Develop and maintain CI/CD pipelines to automate the deployment of applications.

· Monitor system performance, troubleshoot issues, and ensure high availability and reliability of applications.

1. ROS2 Integration:

· Develop and integrate software components using ROS2 for robotic systems.

· Work with robotic sensors, actuators, and control systems to enable seamless operation.

· Collaborate with robotics engineers to design and implement software architectures that meet project requirements.

1. Collaboration and Communication:

· Work closely with product managers, designers, and other engineers to gather requirements and deliver solutions.

· Participate in code reviews, design discussions, and team meetings to ensure code quality and knowledge sharing.

· Mentor junior engineers and provide technical guidance to the team.

Requirements:

· Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.

· 2 to 4 years of experience in software engineering with a focus on full stack development and DevOps practices.

· Proven experience with modern frontend frameworks such as React, Angular, or Next.JS and backend frameworks like Node.js, FastAPI and Flask.

· Strong knowledge of DevOps tools and practices, including CI/CD, and containerization (Docker, Kubernetes).

· Experience working with ROS2 and integrating robotic systems.

· Proficiency in HTML, CSS, JavaScript, and Typescript.

· Familiarity with cloud platforms such as AWS, Azure, or Google Cloud.

· Strong understanding of software development methodologies and best practices.

Job Purpose

Provide strong technical expertise and leadership in Process Development of project transfer and start-up. Responsible for the overall development of the Extraction process. Work closely with team to ensure successful implementation of project. Lead and/or support the team for new product transfer I development, equipment design, processes optimization and qualifications efforts. To ensure compliance to ISO/FDA, cGMPs, HSE regulatory requirements.

Accountabilities

• To lead the Extraction process development aspects of project implementation to deliver results within projected timeline, excellent execution and documentation.

• To lead user requirement specification (URS) development for processes equipment and liaise with vendors on technical discussion.

• To lead design reviews for processes equipment and work with global/ R&D team to develop and transfer the technology to site.

• To develop and execute equipment and processes validation approach / plan.

• To lead and execute new equipment and processes installation, optimization, commissioning, qualification and validation.

• To proactively communicate project progress, key issues and any other critical topics in a timely manner to the appropriate management level and vendors.

• To ensure compliance to cGMPs, IS013485 / FDA, HSE, and policy requirements.

Requirements

• Education: Minimum Diploma in Engineering (Mechanical, Electrical, Automation)or relevant discipline or equivalent.
• Experience: 8-15 years working experience in contact lens or optical device manufacturing or similar environment.
• Good understanding of processes automation system, vision inspection system, robotics and GMP/GDP requirement.
• Good analytical and troubleshooting skill with systemic approach.
• Good leadership and management skills.

Provide strong technical expertise and leadership in Process Development of the project transfer and start-up. Responsible for areas of the Frontend processes. Work closely with team to ensure successful implementation of project. Lead and/or support the team for new product transfer I development, equipment design, processes optimization and qualifications efforts. To ensure compliance to ISO/FDA, cGMPs, HSE regulatory requirements.

Accountabilities

• To lead process development aspects of project implementation to deliver results within projected timeline, excellent execution and documentation.

• To lead user requirement specification (URS) development for processes equipment and liaise with vendors on technical discussion.

• To lead design reviews for processes equipment and work with global/ R&D team to develop and transfer the technology to site.

• To develop and execute equipment and processes validation approach / plan.

• To lead and execute new equipment and processes installation, optimization, commissioning, qualification and validation.

• To proactively communicate project progress, key issues and any other critical topics in a timely manner to the appropriate management level and vendors.

• To ensure compliance to cGMPs, IS013485 / FDA, HSE, and policy requirements.

Requirements

• Minimum Diploma in Engineering (Mechanical, Electrical, Automation)or relevant discipline or equivalent
• Experience: 5-10 years working experience in contact lens or optical device manufacturing or similar environment
• Good understanding of processes automation system, vision inspection system, robotics and GMP/GDP requirement
• Good analytical and troubleshooting skill with systemic approach
• Good leadership and management skills

Roles & Responsibilities

•Inspection of project sites

•Coordinate, manage, and supervise all the instrument installation and monitoring works.

•Liaise and coordinate with contractor for installation and monitoring issues

•Attending site progress meetings, preparation of minutes and coordination with clients.

•Process and interpret monitoring readings

•Coordinate with construction team to minimise obstruction and damage of the monitoring instruments

•Supervise and quality control in instrumentation works

•Any other duties as assigned by Manager.

Requirements

•Relevant education background in Civil Engineering / Geotechnical / Geology

•Min 3 years’ experience in instrumentation and monitoring works

•Experience in LTA projects

•Senior position will be considered with relevant experience.

You may send your resume / CV to email address directly: [email protected]