Job description:

· Responsible for organizing, supervising, and directing project construction activities to successfully meet project specifications and schedules as Contractor’s principal representative to Owner at the jobsite.

· Forms preliminary construction plans including organization, staffing, and administration, subject to review by the Project Manager.

· Studies specifications to plan construction procedures; monitors procurement of equipment and materials to be delivered to conform to work schedules.

· Finalizes assignment of field construction personnel and mobilization plan of manpower; assembles members of organization at the start of the project.

· Authorizes work and services to be purchased from outside sources or subcontracted at the jobsite in accordance with construction policy and project economics.

· Confers with or directs supervisory personnel and subcontractors engaged in planning and executing work procedures, interpreting specifications, and coordinating various phases of construction to prevent delays.

· Authorizes the field construction schedule and field construction procedures to ensure good workmanship, safe construction, and on-schedule performance.

· Acts as liaison between Contractor and Owner’s representatives in the interpretation of specifications.

· Receives from subordinates’ reports on progress, materials, manpower, and costs, and directs the work schedule.

· Inspects work in progress to ensure that workmanship conforms to specifications. Develops new construction methods to satisfy unusual circumstances and changes from the original plan.

· Approves jobsite expenditures for labor and services by reviewing cost records, workmanship, material quality and quantity, scheduling, and procurement.

· Approves Safety procedures for all site workers to abide.

Requirements:-

• Diploma or Degree holder in Engineering field
• 3 years’ experience least in oil & gas, chemical construction industry
• Experience in executing construction in process/petrochemical plants and storage terminals
• Degree holder in relevant major
• Independent, resourceful, diligent and good team player.
• Able to lead supervisors & workers to comply, fulfil projects requirements, meeting schedules.
• Expected to perform hands-on duties with acquired skills and knowledge.

Job scope:

• Monitor, analyze and make decisions on how to address MTBE (Metrology and Backend) tools that are out of control for established SPC rules for both process and defect related issues.
• Use SOP to dispose of products that were out of control for established SPC rules for both process and defect related issues.
• Perform daily compilation of presentation materials on daily process and tools issues and present in Passdown meeting
• Carry out and complete process engineering tasks assigned by process engineers which directly contributed to process improvement and flexibility improvement.
• Required to perform basic metrology tool tuning.
• May be required to perform equipment recipe creation.
• Take the initiative to assume added responsibilities.

Requirements:

• Working hours: 8.30am to 6pm (Mon to Fri)
• Understanding of SPC and its applications in semiconductor equipment and processes.
• Direct experience in metrology (Defectivity/Thickness/Geometry), Sorting and packaging, and Characterization lab are plus points.
• Excellent verbal and written communication, good PC skills, presentation skills and strong data collection and analysis skills.
• Willing to work any shift and that you be a behavioral example by being a proactive problem solver, communicating openly, and taking responsibility.
• Possess good teamwork, multi-tasking capabilities and project leading skills.
• Self-motivated
• Ability to troubleshoot problems and address root causes
• Team oriented with a strong focus on effective team dynamics

• MNC (Woodlands)
• Company Transport Provided
• Basic: $1800 to $2500 + AWS + VB (3 to 4 months)
• Excellent Benefits + Career Progression
• Training Provided for candidate without or with lesser experience

Job Responsibilities:

• General maintenance, equipment repair and overhaul plant equipment / instrument.
• Carry out minor fabrication work (piping, support system, vessel, electrical supply, lighting system).
• Maintain good housekeeping and 5S in the work area.
• Assist in plant troubleshooting job.
• Comply to all risk control measures and adhere to safe work procedure according to WSH (Risk Management) requirements while performing assigned work duties.
• Operate processes in accordance to operating procedures, process safety information (where applicable) and safe work practices.
• Participate in relevant safety and health programs, trainings and initiatives.
• Report on safety and health incidents and accidents.
• Any assigned ad-hop task/s.

Requirements:

• Preferably 2 to 3 years’ experience in a process manufacturing environment.
• Basic Education Requirements: Minimum NTC-3 in Welding/Maintenance Fitting or Electrical fitting and Installation or other relevant technical certificate.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

Responsibilities:

Carry out activities to addresss & resolve Non-Quality Events (NQEs)

Monitors & carry out activities to resolve NQEs at various product / production lines

• Monitors & records NQEs from the production line
• Reviews, analyses & validates NQE contents
• Executes immediate containment actions for NQE e.g., hold lot in Manufacturing Execution System (MES), etc.
• Prepares and consolidates quality issue review topics (to share on the progress of follow ups on NQEs / MRBs) prior to daily meeting with Yield Dept
• Prepares information package required for MRB (e.g. event chronology, preliminary investigation and analysis results, etc.); Facilitates MRB meetings
• Records, follow ups and reports Quality Engineering activities (e.g. NQE, MRB, etc.) on Quality Activities Tracker
• Issues & drives 8Ds for NQE issues

Monitor product thru Quality Gate

Applies Quality Gate (QG)

• Monitors & records QGs results from the production line
• Performs lab analysis (e.g., SEM / EDX) on QG failed parts
• Participates in task forces (defect analysis, risk assessments)

Following the detection of QG failed lots, proposes short-term actions to ensure integrity of the quality of products and / or processes (i.e., equipment shutdown, etc.)

Others

Data Analysis: Pulls, plots capability & trend and analyses data from JMP & Klarity

Reports: Updates & presents various Quality Engineering reports & KPIs

Others: Performs audits and other tasks as may be assigned

Requirements:

Educational Qualifications :

Diploma – Minimum 2 years of relevant experience in a manufacturing environment

Higher NITEC – Minimum 3 years relevant experience

NITEC – Minimum 6 years relevant experience

Technical / job knowledge :

• Knowledge in Quality tools and methods (SPC/MSA/FMEA, Problem-Solving & Audit skills) is an advantage
• Knowedge in statistical tools (e.g. JMP, Klarity, etc.) is an added advantage
• Knowledge and skills in lab (SEM/EDX, etc.) is an added advantage
• Knowledge of semiconductor products & manufacturing processes

Personal capabilities :

• Meticulous and with a sense of initiative, responsibility & urgency
• Team player with positive attitude and willingness to learn

Others :

• Able to work on normal swing shift (Sunday - Thurs), 8.30am to 6pm

• MNC (Woodlands)
• Company Transport Provided
• Basic: $1700 to $2100 + AWS + VB (3 to 4 months)
• Excellent Benefits + Career Progression
• Training Provided for candidate without or with lesser experience

Job Responsibilities:

• General maintenance, equipment repair and overhaul plant equipment / instrument.
• Carry out minor fabrication work (piping, support system, vessel, electrical supply, lighting system).
• Maintain good housekeeping and 5S in the work area.
• Assist in plant troubleshooting job.
• Comply to all risk control measures and adhere to safe work procedure according to WSH (Risk Management) requirements while performing assigned work duties.
• Operate processes in accordance to operating procedures, process safety information (where applicable) and safe work practices.
• Participate in relevant safety and health programs, trainings and initiatives.
• Report on safety and health incidents and accidents.
• Any assigned ad-hop task/s.

Requirements:

• Preferably 2 to 3 years’ experience in a process manufacturing environment.
• Basic Education Requirements: Minimum NTC-3 in Welding/Maintenance Fitting or Electrical fitting and Installation or other relevant technical certificate.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Developing and optimizing processes, including production flow, assembly methods, and equipment
• Ensuring efficient and profitable manufacturing processes
• Carrying out risk assessments of all equipment and processes
• Writing reports based on data collected and presenting findings to higher-ups
• Coordinating manufacturing launch of new or revised products
• Help with change control, test script writing

Requirements:

• Min Degree in related study
• 1-2years experience in Pharma engineering

If you are interested in any of the positions, do kindly drop your most updated resume to [email protected]

Esther Lim Suk Hui

EA Personnel No: R18728082

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Your Job

Molex Singapore is seeking for a Process Outsource Engineer to support production process improvements for subcontractors outside Molex Singapore, ensuring quality, yield, and productivity enhancements. You will be responsible for the smooth release of new products to manufacturing, resolving process-related issues, and tracking assets.

Our Team

This role involves extensive collaboration with various internal departments, subcontractors, fabrication vendors, and machine vendors/suppliers.

What You Will Do

• Develop and continuously improve the sub-con quality system to meet agreed goals.
• Monitor project deadlines and budgetary expenditures.
• Collaborate with Sub-Con, Product Design, QA, and Components Engineers to ensure new product release for manufacturing, including full qualification.
• Implement productivity, quality, and cost reduction programs, as well as machine and process improvements.
• Address and resolve quality and process-related issues at sub-cons for assigned products.
• Provide production support to resolve sub-con quality/process problems.
• Manage product capacity expansion, including duplicating machines/fixtures if necessary.
• Qualify all tooling releases to manufacturing at sub-con.
• Maintain proper documentation control for process capability studies, process FMEA, SOPs, process specifications, OJT task analyses, training records, production records, and assets.
• Oversee equipment transfers from in-house to sub-con, ensuring machine setup and production qualification.
• Provide coaching and supervision for new engineers.

Who You Are (Basic Qualifications)

• Degree or Diploma in Mechanical, Manufacturing, or Production Engineering.
• Minimum of 4 years of experience in a similar position (for external candidates) or a minimum of 2 years in a Process Engineer position at Molex (for internal candidates).
• Proficient in process improvement.
• Knowledge of quality systems.
• Ability to identify and propose solutions for directional errors.

What Will Put You Ahead

• Ability to work effectively in a team environment.
• Willingness to take on challenges and demonstrate initiative.
• Six Sigma certification

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

As a Process and Digital Consultant, you will identify the areas of process improvement and drive digital topics, along with supporting the organization in identifying the system or process issues and consulting on the solutions end-to-end on a daily basis.

You will:

• Discuss with business users, customers and identify the pain points and provide solutions - SAP, Digital, or PowerBI.
• Conduct workshops and continuously improve the Business processes.
• You will also be required to support Data driven initiatives, S/4 Rollout projects and other digital projects as and when require.
• Identify the opportunity of new digital solutions and market trends.
• Ensure you understand the market trends and business targets and bring ideas and solutions.
• Define KPIs, build Dashboards and reports with Celonis, Power-BI etc. for continuous process improvement.

Qualifications

• Degree in Business Administration, IT or similar.
• Minimum 6 years of Experience in SAP consulting.
• Deep Knowledge in any one of the Process Areas: Order-to-Cash, Source-to-pay and logistics.
• Strong knowledge in Data analytics tool by Power-Bi, Red-Lake and Celonis.
• Knowledge about new digital trends & motivation to learn.
• Good project management skills with experience in PM Tools.
• Strong team player with an adapting and open mindset for changing on fast-moving environments.
• Willingness to work with cross functional teams in an international environment.
• Strong presentation and coordination skill.
• Very good language skills in English.
• Key strength require for this role is to identify the Process improvement areas and execution of the improvement.

Additional information

• An in-depth understanding of SAP business solutions in different process Chains
• Overall integration knowledge with SAP Modules e.g., Finance, Costing, Manufacturing, Inventory Management, Quality Management, Procurement and Sales
• Experience of collaborating with the team working from multiple locations/regions
• Good communication skills and stake holder management
• Self-driven and able to drive topics on their own.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

[Order Number: 671284-R]

Responsibilities

• Assist customer engineers in improving machine performance and processes.
• Develop and adjust process methods, equipment setups, and production techniques.
• Work with teams to troubleshoot issues, enhance processes, and implement automation solutions.

Requirements

No experience candidates are welcome to apply.

• Must be comfortable working in a cleanroom environment.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

Karen Lee Kai En Reg No: R22108159

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Process Engineer (Pick and Place) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line in Pick and Place Process.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects.
• Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
  • New material, process & machine development and qualification.
  • Handle and manage customer audits and 8D reports.
  • Provide disposition for engineering and production lots.
  • Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum Degree in Electrical & Electronics, Microelectronics, Mechanical engineering or relevant engineering discipline
• Experience in Semiconductor manufacturing industry & working in cleanroom environment
• Minimum 3 years hands-on process experience in area of in the Wafer-level Fanout packaging production line or LCD/FPD production line in Pick and Place Process.
• Experience in SPC, DOE, FEMA, and 8D reports

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

As a Process Control System Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

As a PDE Network Engineering Process Control System (PCS) Engineer/Senior Engineer, we will be responsible to develop smart manufacturing solutions towards the Industry 4.0 standard. We will gain exposure and knowledge in many cutting-edge areas including Machine Learning, Advanced Control Solutions and Deep Learning. As a PDE PCS Engineer, we will have the opportunity to develop a complete solution that starts from requirements gathering, data analysis and modeling with big data platform, followed by system development and integration; and then network wide implementation. The work we do directly affects the bottom line of the entire company by providing scrap/excursion control, Statistical Process Control (SPC), Advanced Process Control (APC or Run-to-Run), Fault Detection and Classification (FDC), and overall enhanced process capability. We will meet regularly and team with Process areas to understand their tools, processes, and challenges and work with them to create process control models, strategies, and other methods for ensuring quality output.

Responsibilities

• We develop, implement and improve smart control solutions for optimum manufacturing performances.
• We provide technical oversight, guidance and support for process control implementation
• We conduct intensive data analysis and modeling to identify sources of variation in the process and translate it into control solutions.
• We support PDE KEG team in Classification, Characterization and Categorization and define Data Collection Requirements, Perform Integration and Setup Data Collection in E3 Environment.
• We define Analysis and setup Requirements and Setup Limits and OCAP and engage in periodic review with PCS team and network on BKM practices.
• We develop and deliver training on control systems and related topics.

Requirement

• PhD, Masters/Bachelor’s Degree in Electrical and Electronics Engineering/Computer Science/Statistics/ Mathematics/Physics
• At least 4 years of experience in semiconductor manufacturing advanced process control.
• Experience and knowledge in Programming and Data Analysis. Preferred experience in Python/R/SQL/Hadoop eco-system and/or in the development of web-based applications
• Familiar with Machine Learning.
• Good communication and interpersonal social skills.
• Excellent problem solving and analytical skills.
• Excellent verbal and written communications skills. Good interpersonal skill and a good teammate.
• Excellent Project management skills.
• Ambitious and ability to multi-task and balance dynamic priorities.
• Ability to participate in a multi-functional team environment.
• Willing and capable of international travel, as needed, to accomplish your objectives.

Keen on the role? Apply now!

• MNC Company
• Basic $4500 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Company Transport Provided)
• Working day: Monday to Friday
• Working hours: 8am to 4.30pm

Job Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Permanent Position / MNC/ Manufacturing/ Near Woodlands MRT/ Urgent Hiring!!
• AWS/ Annual Leave/ Medical Benefit/ Dental Benefit/ 5 days’ work week
• Possess Master Molder Certificate 1 or 2

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities

• Heading entire process engineering team in production, tooling, NPI and validation.
• Responsible for injection molding and its associated processes for the medical, automotive and technology sectors.
• Lead the activities of process engineering, production/process improvement pertaining to molding process development, mold buyoff, new mold transfer, quality issues.
• Provide documented procedures on buyoff on new / transfer molds prior to mass production release keeping process development as the core activity.
• Lead process validation activities including generation of validation protocols and reports such as IQ, OQ and PQ.
• Ensure that yields and cycle time are in accordance with BOM standard.
• Work in cross-functional group to coordinate with all process-related issues.
• Investigate and implement solutions on process or material related problems.
• Extend support to productivity program such as process automation, tool fabrication and improvement activities.
• Provide adequate support for the cross functional activities such as handling non-conformance product; Initiate actions to prevent recurrence through proper documentation of process instructions, root cause analysis, process flow chart, FMEA, Control Plan.
• Conduct periodical review of process-oriented SOPs & other documentations & keep them up to date a timely basis.
• Drive for continuous improvement projects. Maintain the effectiveness of the validated processes through the understanding of cGMP (current Good Manufacturing practice.

Requirements

• Bachelor’s degree / Diploma qualification in plastic processing / chemical / mechanical engineering.
• Possess Master Molder Certificate 1 or 2.
• Min 10 years industrial experience in plastic engineering and its processing technique.
• Possess through knowledge and practice on scientific molding techniques.
• Knowledge of handling all sort of plastic polymers and molds.
• Familiar and hands on with medical device validations.
• Expert in analysing cycle time and provide support to RFQs.
• Knowledgeable in Risk Assessment, Failure mode analysis, Process Validation, Continuous Improvement and Design of Experiments (DOE).

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

You'll be at the heart of shaping the company success by optimizing operations, and guiding teams toward peak performance. Apply Now!!

• Permanent Position / MNC/ Manufacturing/ Near Woodlands MRT/ Urgent Hiring!!
• AWS/ Annual Leave/ Medical Benefit/ Dental Benefit/ 5 days’ work week
• Possess Master Molder Certificate 1 or 2

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities

• Heading entire process engineering team in production, tooling, NPI and validation.
• Responsible for injection molding and its associated processes for the medical, automotive and technology sectors.
• Lead the activities of process engineering, production/process improvement pertaining to molding process development, mold buyoff, new mold transfer, quality issues.
• Provide documented procedures on buyoff on new / transfer molds prior to mass production release keeping process development as the core activity.
• Lead process validation activities including generation of validation protocols and reports such as IQ, OQ and PQ.
• Ensure that yields and cycle time are in accordance with BOM standard.
• Work in cross-functional group to coordinate with all process-related issues.
• Investigate and implement solutions on process or material related problems.
• Extend support to productivity program such as process automation, tool fabrication and improvement activities.
• Provide adequate support for the cross functional activities such as handling non-conformance product; Initiate actions to prevent recurrence through proper documentation of process instructions, root cause analysis, process flow chart, FMEA, Control Plan.
• Conduct periodical review of process-oriented SOPs & other documentations & keep them up to date a timely basis.
• Drive for continuous improvement projects. Maintain the effectiveness of the validated processes through the understanding of cGMP (current Good Manufacturing practice.

Requirements

• Bachelor’s degree / Diploma qualification in plastic processing / chemical / mechanical engineering.
• Possess Master Molder Certificate 1 or 2.
• Min 10 years industrial experience in plastic engineering and its processing technique.
• Possess through knowledge and practice on scientific molding techniques.
• Knowledge of handling all sort of plastic polymers and molds.
• Familiar and hands on with medical device validations.
• Expert in analysing cycle time and provide support to RFQs.
• Knowledgeable in Risk Assessment, Failure mode analysis, Process Validation, Continuous Improvement and Design of Experiments (DOE).

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

Employment Type: 1-year contract (renewable subject to work performance)

Salary: Up to S$5,500

Location: Serangoon North (onsite)

Key Responsibilities:

• Collaborate with internal stakeholders for tender and quotation updates.
• Liaise with Procurement and Contract Managers on requests.
• Renew maintenance contracts, overseeing the entire process from approval to award.
• Prepare letters of award and compile contract documentation.
• Coordinate contract commencement meetings with vendors.
• Conduct final account assessments before contract expiry.
• Manage and maintain records of maintenance contracts.
• Analyze contractor assessment results and coordinate vendor management with Facilities Managers.
• Assist with audits and reporting related to contracts and vendors.
• Perform administrative tasks as assigned and support team members.

Requirements:

• Diploma/Degree in Quantity Surveying or Facilities Management.
• Minimum 3 years of experience in contract management / procurement in building facilities/ services related.
• Experience in dealing with tender management (e.g. calling tender, tender evaluation, and tender award).
• Candidates with Quantity Surveying background is advantageous.
• Strong understanding of procurement processes and budgeting.
• Team player, organized, detail-oriented, and able to work under tight deadlines.
• Proficient in Microsoft Office; experience with e-sourcing tools like Ariba, Acubuy, and SAP is a plus.
• Good verbal and written communication skills.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

• Well Established Company
• Basic $4000 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Work with both R&D and Operation Managers to kick off improvement projects that aims at cost reduction, yield improvement, Human Resource Management (work along with HR), etc.
• Implement Lean manufacturing principles and best practices to drive process improvements across all production lines
• Develop Production standard procedure or Work Instructions and align these documents with quality management systems requirements
• Prepare and conduct training for Operation teams to ensure up-to-date compliances are practiced consistently
• Identify opportunities for process optimization and implement strategies to improve productivity and efficiency
• Collaborate with the R&D team to introduce new technologies and innovations to our manufacturing process
• Report monthly CI & other assigned KPI performance
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s Degree in Mechanical/Industrial Engineering, with minimum 1 year working experience in manufacturing environment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492