• To handle the full spectrum of project management
• To lead a site Management team to complete the project on time and within budget
• To inspire and motivate the site team to work effectively and efficiently
• To enforce appropriate measures so as to comply with the required standard of safety in execution of tasks.
• To drive high productivity on site using relevant cost saving methods at all times.
• To ensure that the documented Quality and workplace health and safety (WHS) policies are effectively implemented, maintained and reviewed.
• To ensure the Project Quality and WHS objectives are being met and any discrepancies are being addressed immediately.
• To ensure that the overall phases of the project is effectively coordinated and organized.
• To liaison with the client, consultant, suppliers (sub-contractors) and other relevant authorities on management issues pertaining to the project.

Requirements:

• Degree / Diploma in relevant Engineering discipline.
• Must have at least 5 years of post-graduate experience in project management
• Ability to handle Projects independently.
• Ability to display initiative in execution of tasks and being pro-active in the delivery of tasks
• Dealing professionally in managing tasks and consistently meet tight deadlines
• Attention to details and good problem solving skills

· Minimum 5 years of relevant experience

· Responsible for the planning activities within a project and organisation planning across all projects.

· Provide project Progress S curve, activity list, logic diagram (PERT , CPM), time scaled logic diagram, Bar chart, manpower histogram, resource and cost curves.

· Publish the planning weekly report of all projects and disseminate to key stakeholders.

· Overall project coordination liaising with engineering, procurement and construction team for the purpose of developing a fully integrated schedule.

· Follow through construction, commissioning, qualification and handover.

· Obtain input from project team members, contractors, suppliers and client to support the development of a baseline schedule, and subsequently to update schedule progress and forecasting.

· Use planning/scheduling principles and methods including: CPM scheduling techniques, Resource loading of schedules, Field Progress Measurement.

· Analyse critical path and highlight to project team.

· Coordinate and support the preparation of monthly spending plan curve.

· Provide a regular management update on the progress of the major activities in process improvements and quality improvements

· Any other tasks as assigned by your Superior/s

Responsibilities:

• To assist QP(Supervision) on the site supervision and coordination works.

• To attend site meetings and resolve site technical issues.

• To review contractor’s submission.

Requirements:

• Registered with IES as Resident Engineer (RE) in Singapore.

• Minimum 4 years relevant site experience and preferably in viaduct structures and/ or geotechnical works.

• Able to work independently as well as in a team.

• Collaborate closely with the Technical Director and Project Manager to manage projects related to structural investigations in the Civil Engineering field.
• Conduct inspections and structural investigation tasks.
• Supervise and train staff and workers on testing procedures.
• Prepare detailed reports for the Senior Engineer for submission.
• Monitor project progress and ensure timely completion of tasks.
• Coordinate with lab personnel, clients, and SAC representatives to maintain proper equipment handling and adherence to ISO 17025 standards.
• Perform construction material testing in the laboratory, interpret results, and prepare comprehensive reports.

Roles & Responsibilities

· Prepared project status report by collecting analyzing, and summarizing information and trend

· Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.

· Maintains safe and clean working environment by enforcing procedures, rules, and regulations

· Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.

· Monitor and ensure all works carried out in accordance to contract and specifications

· Attend meeting and liaise with Consultants and Contractors

· Assist Project Manager

Requirements

· Minimum 2-years’ experience

· Possess relevant degree in building/ civil engineering

· Able to work independently

· Hardworking and responsible

· Able to communicate with all levels at site

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

• Identifying deficiencies in mechanical processes and developing improvements

• Designing and developing prototypes

• Analyzing and testing prototypes and each revision of a device

• Supervising the development of computer-aided design (CAD) project drawings from junior team members

• Developing, initiating and managing all phases of projects

• Preparing documentation of critical analysis and providing suggestions for correcting errors

• Collaborating with Production Managers for proper allocation and tracking of resources

Degree in Mechanical Engineering

Minimum 3 years M & E Experience

Experience in Fire Sprinkler System

Autocad Skills and Computer Skills

independent Self-motivated, hard working and able to work as a team

To assist Project Manager to liaise with clients and consultants on Projects

To co-ordinate sub-contract works

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

• Designing: Drawing up plans for new designs, such as buildings, roller coasters, space vehicles, and movie special effects
• Building: Overseeing construction projects
• Testing: Running quality-control tests on new products
• Analyzing: Analyzing existing processes and systems to improve them
• Developing technical data: Developing technical data for materials, dimensions, quantities, and costs
• Providing guidance: Providing guidance for the planning, engineering design, and maintenance of projects

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

Job Description

• Industry/ Organization Type: Custom Die-cut Components Manufacturer
• Position Title: Process & Manufacturing Technician/Engineer (2D CAD Designer/Drafter)
• Working Location: Serangoon North
• Working Hours: Monday – Friday, 8am – 5.30pm
• Salary Package: Up to $3,800 + VB
• Duration: Permanent

Key Responsibilities

• Define manufacturing processes and estimates for new project introductions (RFQs).
• Design and define die cutting tooling.
• Prepare Process & Manufacturing documentation such as CAD Drawings, BOM, ECN, Control Plans, and Working Instructions.
• Evaluate manufacturing processes based on quality criteria, including efficiency, speed, and cost.
• Provide support for production troubleshooting and manage production delays.
• Promote continuous improvement in operational KPIs (Scrap, Efficiency, Cost, Yield, Customer Complaints, Audits, etc.).
• Optimize facility layouts, production lines, machine operations, and network performance.
• Implement cost-reduction strategies while maximizing quality.
• Train staff in both new and existing manufacturing processes.
• Collaborate with engineers, contractors, suppliers, and team members to improve processes.
• Ensure compliance with safety and environmental regulations in all manufacturing procedures.
• Study and upgrade systems and processes with new technologies.

APPLY NOW!!!

• Minimum of a Diploma/Degree in Engineering, preferably with at least 2 years of experience in a manufacturing or production environment.
• Prior experience in continuous process improvement culture/approach
• Proficient in CAD 2D software.
• Experience with ISO 9001 and ISO 13485 audits, Six Sigma, and lean manufacturing principles is highly desirable.
• Hands-on experience with laser machines will be an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70614 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

• 5 days, Jurong West, Transport
• $3800 - $4500, AWS, performance bonus
• Medical/dental benefits

Job Description

• Review engineering drawing & specifications, design and execute engineering experiments, calculations and statistical control for new products & processes.
• Perform trouble shooting & analysis of production & process issues for cleanroom & non-cleanroom operations. Perform process redesign where required.
• Support qualification & setup (where applicable) of new materials, recipe, processes & system application for both cleanroom & non-cleanroom operations.
• Perform new equipment & materials validation using standards involving IQ, OQ & PQ methodology.
• Source new suppliers, qualify specifications & perform cost estimation to price out project expenses.
• Support new business projects & technology implementation.
• Research, Procure, Qualify & Implement new solutions (equipment or materials).

Job Requirements

• Possess a Diploma or Degree in Engineering
• Minimum 2 years of working experience
• Knowledge on end to end processes from technical/material qualification, process qualification to manufacturing & supply chain logistics engineering.
• General awareness of Manufacturing Systems e.g. CAD, Manufacturing Execution System, ERP & Technical Publications.
• General experience with work flow Simulation software & Robotics applications e.g. Flexsim & UiPath.
• Experience with write-ups on work procedure workflow & instructions for production process.
• Ability to apply ISO13485, GDPMDS & other ISO standards to existing operations & into new businesses.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, Boon lay, Transport provided to & fro
• $4200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Description

• Industry/Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

The Senior Process Engineer will spearhead the design, implementation, and optimization of wastewater treatment processes within our projects. This role involves managing a team of engineers, collaborating with various departments, and implementing cutting-edge technologies to advance project goals. This role requires a deep understanding of chemical, physical, and biological treatment methods, strong project management skills, and a commitment to environmental sustainability.

Roles & Responsibilities:

To lead the process engineers,

• Develop detailed process designs for complex wastewater treatment projects.
• Lead pilot studies and data collection efforts to validate process concepts.
• Create process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs).
• Perform detailed calculations related to plant process design and prepare system operation & control philosophy.
• Work closely with multiple disciplines to ensure quality and competitive proposals are developed and delivered on time.
• Support Business Development on technical presentations and/or meetings with potential or existing clients.
• Participate in preparing the design specification, Bill of Quantity (BQ), and Request for Quotation (RFQ) and assist in selecting equipment and components.
• Assist in project implementation, including process-related document preparation and technical clarification with client.
• Participate in testing and commissioning work.
• Any other works as instructed by the company management.

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

Senior/Process Design Engineer (Wastewater Treatment)

Our client is a leading environmental solutions firm with strong expertise in EPCC, O&M and design & build. In line with their growth and expansion, they’re now looking for a Senior/Process Engineer to join their dynamic organization during an exciting time in their development.

Job Responsibilities

• Be responsible for designing, implementing, and optimizing wastewater treatment processes and systems
• Coordinate with cross-functional teams, including design, construction, and commissioning, to ensure seamless project execution.
• Prepare technical specifications for treatment plant
• Provide engineering support for tender activities, bids and proposals, and prepare testing and commissioning plans
• Manage contractors and suppliers, ensuring adherence to technical specifications and safety regulations
• Lead continuous improvement initiatives to enhance the reliability and effectiveness of wastewater systems.
• Ensure that treatment plants comply with regulatory standards and operate efficiently

Requirements

• Minimum Degree in Chemical Engineering, Environmental Engineering or related field
• Possess process/mechanical design experience with wastewater treatment projects
• Must be willing to be hands-on to be on site occasionally
• Must be able to draw and review drawings (i.e. create process flow diagrams (PFDs), piping and instrumentation drawings (P&IDs), perform detailed calculations related to plant process design)

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

• Generate service and spare parts quotations based on customer inquiries and needs.
• Carry out service tasks, including performing repairs and commissioning of gas and water quality analyzers, CEMS, and AQMS both in-house and at customer locations.
• Troubleshoot and offer recommendations for analyzer issues, ensuring solutions comply with company's standard procedures and safety regulations.
• Build and maintain positive relationships with customers, providing them with ongoing technical and service support.
• Collaborate with customers to address service-related concerns and offer tailored technical solutions.
• Assist the project team in executing Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT) for projects.
• Identify new opportunities to expand preventive maintenance and service contract offerings.
• Provide training on product usage and features to end users and distributors.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No: 20C0270

Responsibilities:

• Provide Technical expertise with respect to Emerson DeltaV or Rockwell Automation PLC/HMI system and software and in particular configuration in the company.
• Support software/hardware modification pertaining to the site Automation systems.
• Perform any modification/changes in terms of Hardware/Software in accordance with site GMP quality requirement.
• Support field troubleshooting with other internal Stakeholders.
• Interact with other departmental stakeholders like Quality, Engineering, Manufacturing as well as other staff within MSAT department on automation related enquiries.
• Support testing Factory Acceptance Tests (FAT), Commissioning and Qualification in accordance with site GMP quality requirement.
• Support other technical changes and duties such as On Call/Shift duty as required
• Support Modbus/Devicenet/Profibus/Fieldbus and other types of devices communication protocol/devices in terms of troubleshooting/modification/addition. Support Variable Frequency (VFD) commissioning/modification and validation

Requirements:

• Minimum 3 years’ experience working with bio manufacturing projects
• Knowledge/Proficient in DeltaV is a must.
• Knowledge of site GMP quality requirement will be a plus
• Knowledge of upstream manufacturing will be a plus
• Pharmaceutical related experience preferred
• Must be team player, self-starter, curious with strong analytical and organizational skills
• Experience in upstream / downstream / Central services process operation will be a plus
• Experience in equipment design for process equipment will be an advantage.
• Experience in driving stainless steel equipment projects is a plus.

Based in Tuas.

1 year contract. Option to extend/annual renewal depending on performance

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career. This role focuses on developing world-class engineering solutions that meet the unique challenges of biotech production.

In this position, you will provide support to Process Engineers in the characterization of new and existing products, maintaining and improving metrology tools, and ensuring process excellence in a high-volume biotech production setting. You will collaborate extensively with various departments including Manufacturing, Equipment Engineering, Analytical Sciences, Facilities, Supply Chain, and Quality Assurance to support new product releases and continuous process improvement.

Scopes & Responsibilities

• Assist Process Engineers in troubleshooting, sustaining, and continuously improving production lines for consumables related to new product development, yield, quality, and throughput.
• Design and execute controlled experiments to optimize processes, while documenting and analyzing results.
• Support MES ticket handling and process verification/validation activities.
• Conduct nonconforming material analysis and investigations.
• Recommend and implement process improvements to meet production goals across multiple operations and technologies.
• Coordinate execution of equipment and process validation, data collection, and report summarization.
• Collaborate with Engineering/R&D teams to develop and refine processes for new and existing products.
• Maintain and update technical documentation, including technical requirements, drawings, and work instructions for engineering and consumables production lines.

Qualifications

• Diploma or Bachelor’s degree in Engineering, Sciences, or related field.
• Experience in manufacturing within a FDA-regulated environment is advantageous.
• Strong understanding of manufacturing processes within a regulated biotech or medical devices environment.
• Ability to execute test plans for components, materials, systems, and processes effectively.
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint).
• Experience with product & process feasibility studies, line validation, qualification, and process optimization.
• Excellent team collaboration, interpersonal, and communication skills.
• Strong documentation and technical report writing abilities.
• Ability to manage stress and handle multitasking across functions effectively.
• Proactive, innovative, and self-motivated.