• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Attends external project kick-off meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting;
• Assists Project Manager in carrying out all shop drawings and submission with Drafting Department;
• Assists Project Manager in carrying out risk assessment and other risk management activities; makes recommendations on risk control measures; communicating risk assessment to all workers;
• Ensures all contractors are safety inducted and issued with Permit before work commencement;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager or project director of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Resolves site problems proactively in a timely manner and seeks advice from Project Manager as appropriate;
• Ensures the timely preparation of project progress and other reports;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Assists in cost control by cutting materials wastage, reducing labour cost, usage of tools and equipment, etc;
• Assists the Project Manager in conducting Mass Tool Box meeting with safety personnel;
• Ensures proper project documentation including email communication;
• Assists in promoting good team morale and team spirit in the project team;
• Strong in Structural work

Job Title: Solar Project Engineer

Department: Engineering/Project Management

Reports to: Project Manager or Engineering Manager

Job Summary

The Solar Project Engineer will oversee the engineering, design, and technical aspects of solar projects from initiation to completion. This role requires close collaboration with project managers, design teams, and installation crews to ensure that each project is executed to the highest standards, safely, efficiently, and within budget. The Solar Project Engineer will also ensure compliance with all regulatory and industry standards, troubleshoot technical issues, and support continuous improvement in project execution.

Key Responsibilities

1. Project Design and Engineering

• Develop and review detailed designs for solar PV systems, including single-line diagrams, layouts, and schematics.
• Conduct feasibility studies and site assessments, including shading analysis, solar irradiance, and other site-specific conditions.
• Work with design software (e.g., AutoCAD, PVsyst, Helioscope, or similar) to model and optimize system performance.
• Select appropriate system components (e.g., inverters, solar panels, mounting structures) based on project requirements, budget, and site conditions.
• Collaborate with structural and electrical engineers to ensure system designs meet safety and regulatory standards.

2. Project Planning and Coordination

• Develop project timelines, resource plans, and engineering deliverables in collaboration with the project management team.
• Coordinate with procurement to source materials and ensure timely delivery of components.
• Prepare technical documents, including bill of materials, wiring diagrams, and specifications.
• Participate in pre-construction meetings to ensure alignment on project requirements and schedules.

3. Quality Control and Compliance

• Ensure all designs comply with relevant codes, standards, and regulatory requirements (e.g., NEC, IEC, local building codes).
• Conduct technical reviews and inspections of completed installations to ensure adherence to design specifications and quality standards.
• Implement quality control measures and perform periodic checks during installation.
• Review and approve submittals, test plans, and commissioning procedures.

4. Technical Support and Troubleshooting

• Provide technical support to the construction and installation teams, addressing issues as they arise on-site.
• Identify and resolve engineering issues that may affect project timelines, costs, or quality.
• Monitor system performance and work with O&M teams to troubleshoot and rectify issues post-installation.

5. Documentation and Reporting

• Maintain accurate records of engineering designs, specifications, and project changes.
• Prepare and present project status reports, highlighting technical progress, issues, and risks.
• Ensure that all documentation, including as-built drawings and commissioning reports, is completed accurately and submitted in a timely manner.

6. Health, Safety, and Environmental (HSE) Compliance

• Ensure all engineering practices comply with company HSE policies and local regulatory requirements.
• Participate in safety meetings, conduct risk assessments, and promote a safety-first culture on-site.
• Identify potential safety risks in the design phase and work with teams to mitigate these risks in implementation.

7. Stakeholder Communication

• Liaise with clients, contractors, and subcontractors to ensure alignment on project requirements and deliverables.
• Communicate technical updates, project progress, and any changes to key stakeholders.
• Attend site visits and client meetings to address technical queries and provide project updates.

Required Qualifications

Education and Experience

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, or a related field.
• Minimum of 2-5 years of experience in solar project engineering, renewable energy, or a related industry.
• Proven experience with solar PV system design and project management.

Technical Skills

• Proficiency in design and simulation software (e.g., AutoCAD, PVsyst, Helioscope).
• Strong knowledge of electrical systems, solar PV technology, and power distribution.
• Familiarity with industry standards and codes (e.g., NEC, IEC).
• Understanding of site assessment tools and techniques, including shading and irradiance analysis.

Soft Skills

• Excellent problem-solving skills with a detail-oriented approach.
• Strong communication skills for effective collaboration with clients, team members, and stakeholders.
• Ability to work independently and manage multiple projects simultaneously.

Additional Requirements

• Willingness to travel to project sites as required.
• Valid driver’s license.
• Professional Engineer (PE) certification or PMP certification is a plus.
• Ability to work in outdoor conditions and at heights (if applicable).

Benefits

• [List any benefits your company offers, such as medical insurance, retirement plans, etc.]
• Opportunities for professional development and certification.
• Career growth in a rapidly expanding renewable energy sector.

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

ABOUT MONEYTHOR

Moneythor is an award-winning global enterprise software company based in Singapore providing banks and fintech firms world-wide with a modern technology platform to enhance their digital banking services, with a prime focus on the generation of data-driven personalised recommendations and insights for consumers and businesses.

Moneythor is headquartered in Singapore and with presence in London, Paris, Dubai, Tokyo, and Sydney, with further expansion in progress.

OVERVIEW

Are you energised by figuring out elegant solutions to hard problems? Do you love doing great work and always going above and beyond for your clients? Have you been looking for a role where you can stretch and leverage all your skills as part of an amazing team? If yes, then this might be the perfect role for you!

We have an opening for a pro-active and personable Solution Engineer with deep JavaScript, HTML, and Web development experience. This is a client-facing role where you will be the point person for our enterprise clients in the region and help them maximize the value they generate from the Moneythor solution. You will also work closely with our business development, product, and engineering teams to identify potential product enhancements and sales opportunities arising from your client engagements. This is a hybrid role and will work both remotely and out of our client offices based in Singapore.

RESPONSIBILITIES

• Provide strategic, operational and deep technical expertise to execute Moneythor’s Customer Success vision.
• Provide assistance to our digital banking clients and address their ongoing technical & functional questions.
• Act as technical go-to person for our customer success organization
• Leverage your deep HTML, JavaScript, Web development, SQL, and Java skills to customize our clients' implementations.
• Play an evangelist role with our clients on the existing and/or new features of the solution.
• Maximize platform adoption/engagement and drive new business growth through greater advocacy and reference-ability.
• Understand and analyze client business requirements, and help implement, test, package and ensure the timely and accurate solution delivery.
• Partner with business development, product, and engineering teams in pre-sales, onboarding, and client-retention activities.
• Maintain in-depth understanding of our platform and provide vetted, impactful customer feedback to the product team.
• Use a case tracking system to manage information, questions and answers for every client-driven request.
• Identify potential opportunities to extend our relationship with clients and ensure that these are passed on to the appropriate team members.
• Maintain expert professional knowledge about the market and developments in the digital banking industry.
• Respond to service disruptions/incidents as part of our internal incident procedures.
• Ensure accurate and timely completion of all projects and requests.

REQUIREMENTS

• 5+ years of experience working in a CSM/Solution Engineer role, or as a client-facing technical and business analyst with involvement in project implementation, pre-sales and support activities.
• Hands-on technical experience with JavaScript, HTML, Java, SQL, Web and database technologies.
• Excellent written and oral communication skills.
• Ability to work on multiple client accounts in autonomy with little or no management oversight.

Job Description:

• Collaborate with project managers to develop detailed project plans, including timelines, resources, and budgets.
• Oversee construction activities on-site to ensure compliance with project plans, specifications, and safety regulations.
• Monitor and inspect construction materials and workmanship to ensure adherence to quality standards and project specifications.
• Act as a liaison between project managers, contractors, subcontractors, and other stakeholders to ensure smooth communication and coordination throughout the project lifecycle.
• Identify and address any technical or logistical issues that arise during construction, offering practical solutions to minimize delays or disruptions.
• Maintain accurate and organized documentation of project progress, including daily reports, work logs, and any changes to plans or specifications.
• Enforce and promote strict adherence to safety protocols and regulations, creating a secure work environment for all personnel on-site.
• Monitor project expenditures to ensure they align with the approved budget and make recommendations for cost-saving measures where applicable.
• Regularly update project managers and stakeholders on the status of construction projects, highlighting achievements, challenges, and milestones.
• Collaborate with multidisciplinary teams, including architects, engineers, contractors, and subcontractors, to achieve project goals collectively.

Job Requirements:

• Bachelor's degree in Civil Engineering or related field.
• Proven experience as a Site Engineer or similar role in the construction industry.
• Strong knowledge of construction processes, materials, and methods.
• Familiarity with relevant software tools, including project management and design software.
• Excellent communication and interpersonal skills.
• Attention to detail and problem-solving abilities.
• Ability to work effectively in a fast-paced, deadline-driven environment.
• Strong leadership and decision-making skills.

- Carry out daily supervision and coordination of all M&E implementations at site

- Understand and familiar with the contract requirement and specifications.

- Superior of M&E foreman and Supervisors and coordinate with multiple parties.

- Responsible for scheduling, planning, project supervision and documentation

- Ensure work progress meets timeline and updating of progress report

- Liase with sub-contractors and consultants on engineering details ahead of site progress

- Any other ad-hoc duties as assigned.

- More job-related scope will be brief during Interview.

Roles & Responsibilities

· Study construction drawing

· Raise RFI

· Responsible for the preparation of design calculation, checking of shop drawings and submit for approval

· Prepare and issue production drawing to production team

· Liaising with other internal company functions on all matters related to design and shop drawings.

· Maintain all drawing files, update drawings as needed, and make correction to drawing as needed.

Requirement:

· At least 1-2 year(s) working experience in precast industry

· Proficiency in AutoCad, Microsoft office (Word, Excel, Outlook)

· Prefer with Civil Engineering background

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Title: Sales Engineer

Department: Sales

Reports to: Regional Sales Manager

Location: Singapore, Malaysia, Indonesia, Thailand, Vietnam

Job Summary:

The Sales Engineer will be responsible for driving sales, developing business relationships, and providing technical expertise to clients in the fields of interior design, supply and installation, HVAC systems, sewage treatment plants, oily water separators, deck machineries, and marine lighting. The ideal candidate will have a strong technical background combined with exceptional sales skills and the ability to work across multiple countries in the Southeast Asian region.

Key Responsibilities:

1. Sales and Business Development:

- Identify and develop new business opportunities within the specified regions.

- Establish and maintain strong relationships with existing and potential clients.

- Conduct market research to understand customer needs, market trends, and competitive landscape.

- Prepare and deliver technical presentations and demonstrations to clients.

2. Technical Expertise:

- Provide clients with technical advice and support on a range of products and services.

- Collaborate with the engineering and product development teams to understand product specifications and capabilities.

- Assist in the customization of products to meet specific client requirements.

3. Project Management:

- Oversee and coordinate the installation and implementation of products and systems.

- Ensure projects are completed on time, within scope, and within budget.

- Liaise with contractors, suppliers, and internal teams to ensure successful project execution.

4. Sales Administration:

- Prepare and present sales proposals, contracts, and agreements.

- Track and report on sales performance and progress against targets.

- Maintain accurate records of customer interactions and transactions in the CRM system.

5. Customer Service:

- Provide post-sales support to ensure customer satisfaction and repeat business.

- Address customer inquiries and resolve issues in a timely and effective manner.

- Gather customer feedback and work with internal teams to improve products and services.

6. Travel:

- Traveling within the designated region to meet clients and manage projects as require.

- Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Qualifications:

- Minimum of 3-5 years of experience in sales engineering or a related technical sales role.

- Sound technical knowledge in one or more of the following areas: HVAC systems, sewage treatment plants, oily water separators, deck machineries, and marine lighting.

- Excellent communication, negotiation, and presentation skills.

- Ability to work independently and as part of a team.

- Proficiency in MS Office Suite.

- Ability to travel as require within the region.

Benefits:

- Competitive salary.

- Health and dental insurance.

- Opportunities for professional development and career advancement.

- Travel allowances and reimbursement.

Descriptions:

• Provide IT technical support on hardware and software issues
• Liaise with internal and external parties
• Install operating systems and applications
• Fulfil ad hoc responsibilities and duties when required

Requirements:

• Bachelor’s Degree in Computer Science or equivalent
• Skilled in installing and configurating IT hardware and software
• Skilled in troubleshooting IT hardware and software issues
• Minimum 1 year experience in IT desktop support work
• Responsible, organized, hardworking and team player

Solution Engineer

We are seeking independent and motivated Solution Engineer who has experience in both small and big scale cloud-based projects, to support agencies and the GCC product team to create value in the GCC platform. This role will work closely with the agency users, GCC product and partnering teams, using a collaborative approach with strong technical understanding, to assist and ensure that the GCC platform continues to add value to agencies.

Roles and Responsibilities:

• Work directly with GCC engineering team, product team and various key stakeholders.
• Support development of proof-of-concepts for GCC platform in concert with product team and various stakeholders.
• Take ownership of end-to-end solutions provided by teams across the organization.
• Provide system troubleshooting and problem solving across platform and application domains, expect to participate in on-call escalations to troubleshoot customer facing issues.
• Assist in the migration activities for GCC platforms.

Job Requirements

• Degree in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.
• Experience with managing cloud infrastructure and services on AWS, Microsoft Azure, or Google Cloud Platform, preferred.
• User-centric mindset. Be able to represent users’ viewpoints on GCC in order to drive changes & innovations to meet their needs.
• Passion for automation, standardization and best practices.
• Solid hands-on experience in designing, building, deploying and securing of highly available web application in cloud platform such as AWS, Microsoft Azure or Google Cloud Platform.
• Experience with DevOps tools such as Gitlab or Azure DevOps
• Experience with back-end technologies such as Node.js, Python, or Go
• Good understanding of network components such as load balancers, firewalls, VPNs, and DNS.
• Good understanding of DevOps principles and practices, knowledge in DevSecOps will be an added advantage.
• Self-motivated with good communication skills.
• Experience in an Agile development environment focusing on rapid, quality delivery.
• High attention to detail, accuracy, and meticulousness in handling figures and processes in a high-agility environment.

The detail plans as described above are as follows:

• Execution formation with the direction by COMPANY’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with COMPANY’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the COMPANY’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Job Description & Requirements

• Minimum a degree in Information Technology or equivalent
• Minimum 2 years of relevant working and technical IT experience
• Good problem solving / troubleshooting skills
• Good customer service attitude
• Good knowledge of Microsoft Windows Server Operating Systems
• Some knowledge of Linux Operating Systems (e.g. RedHat, Ubuntu)
• Some knowledge of Networking concepts and topologies
• Basic knowledge of Cybersecurity concepts

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: North
• Working days: Monday to Friday
• Working hours: 8am – 5pm

Job Responsibilities:

• Perform visual and functional checks on the products on site
• Provide site supervision on contractors for proper installation of the products.
• Handle trouble shooting on products on site and identify any leaking or faulty installation of the components
• Communicate with workers on site and supervise their tasks
• Present on improvement plans that generate pull through of product sales
• Work closely with Sales to promote on-site services contracts
• Provide both technical and market insight support to sales department for Oil & Gas market and mechanical packages
• Coach, mentor and elevate associates’ capabilities to enable them to deliver results exceeding expectations while creating opportunities for development and succession
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s degree in Instrument / Mechanical engineering or strong science/technical discipline with at least 1-2 years of relevant onsite sales experience in instrumentation or process industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client provides products and solutions to hospitals in Singapore.

• Develop and execute validation protocols for washers and sterilizers used in hospital settings.
• Support regulatory submissions and inspections, providing necessary documentation and evidence of compliance.
• Ensure documentation is complete, accurate, and audit-ready.

Requirements:

• Degree in Biomedical Engineering
• At least 2 years experience testing Central Sterile Supply Departments and/or water treatment systems.
• Excellent analytical, problem-solving, and communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Monday– Friday)

• Variable Bonus + Excellent Welfare

• Well Established Industrial Automation Company (MNC)

Job Scope

• Design and develop complex, high-performance software applications for motion control, industrial automation, and API-based systems
• Program machine functionalities using motion control cards (MCCs) for precise movement control.
• Integrate with distributed I/O systems to gather sensor data and control actuators.
• Collaborate with cross-functional teams to implement innovative solutions and features
• Write clean, maintainable, and well-documented code using C++
• Troubleshoot and debug issues, providing timely resolutions
• Participate in the software development lifecycle, including requirements gathering, design, implementation, and testing
• Stay up-to-date with the latest industry trends and technologies, and contribute to the continuous improvement of our engineering practices

Requirement

• Bachelor’s Degree in Computer Science / SoftwareEngineering or other related field
• 5 to 8 years of relevant experiences in developing industrial automation software using C++, C#
• & WPF
• Proven experience with programming motion control cards and distributed I/O systems
• Strong understanding of Windows API development and memory management techniques

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Review project specs to ensure equipment meets contract requirements
• Prepare and approve instrument and electrical deliverables (e.g. wiring diagrams, lists, data sheets)
• Create material requests and evaluate bids for electrical and instrument equipment
• Develop engineering standards and procedures for design
• Monitor project costs and schedules
• Attend technical meetings and address client feedback
• Support plant start-up and on-site troubleshooting
• Provide technical support and estimates to the sales team
• Advise engineers and Project Managers
• Follow company health and safety guidelines

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5 years of relevant experience
• Familiar with key engineering concepts and practices
• Strong organizational and multi-tasking skills
• Excellent problem-solving and analytical abilities
• Proficient in Microsoft Office, Microsoft Project, and AutoCAD
• Strong verbal and written communication skills
• Able to work independently with attention to detail
• Good teamwork skills
• Knowledge of hazard area classification
• Fluent in English (speaking and writing)

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

• Well Established Company
• Excellent Welfare and Benefits + Career progression
• Basic $4000 - $6500 + AWS + VB
• Working location: North-East
• Working Hours: Monday to Friday (8:30am to 5:30pm)
• Must have C / C++

Job Responsibilities:

• Responsible for software prototyping, requirement analysis, design, development, test, system integration and site integration for developed applications
• Design, configuration, test, integration and maintenance of Automation & SCADA Systems and applications
• Provide technical, deployment and commissioning support to Project Teams and Customers
• Maintain and enhance software applications in both functionality
• Provide software support via on-site troubleshooting, testing and tuning of applications, software, network, protocols and communication issues

Requirements:

• Diploma / Degree in Electronics Engineering or Computer Science or equivalent
• Experience with two or more language such as C/C++, C#, Python

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Roles & Responsibilities:

• Support the accomplishment of construction human resource objectives by selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising job contributions; recommending compensation actions; adhering to policies and procedures.

• Act as the main QAQC adviser on project site for subcontractors, crafts people and operatives

• Prepare and plan QAQC procedures and documents for the project/ works

• Attend to and prepare for any quality inspection required for the works

• Formulate and implement a quality assurance program for the worksite including but not limited to training, assessment and implementation to ensure quality works on site

• Maintain, formulate and follow through quality assurance system and follow through the audit requirements

• Advise and monitor the operation team for quality execution of the works on site

• Liaise with Clients, consultants, architects, subcontractors/ vendors with regards to quality execution and planning of the works

• Liaising with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws in relation to quality

• Liaising with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of quality aspects of the works

• Day-to-day management of the site, including supervising and monitoring the site supervisory crew, labour force and the work of any subcontractors to ensure quality execution of the works

• Overseeing quality control and health and safety matters on site;

• Preparing reports as required;

• Resolving any unexpected technical difficulties and other problems that may arise.

• Updates job knowledge by tracking and understanding emerging construction practices and standards; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations.

• Managing, monitoring and interpreting the contract design documents/ drawings supplied by the client, architect or consultant;

• Enhances organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

• Upholding Company’s work ethics and proper display of representation to Clients/Vendors/Subcon

Requirements

• Degree in Engineering or equivalent

• Min. 2 year of relevant experience in Quality Assurance, Process Audit

• Min 2 years in the Oil and Gas Industry

• Trained in ISO:9000 / Internal Quality Audit Trainings preferred

• Performance-driven and excellent leadership skills

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

• Basic Salary UP$4000 + Transport Allowance

• Company located at Tuas

• 5 Days work week: Monday – Friday: 8am – 5pm

• Well Established Manufacturing Company

• Variable Bonus + Excellent Welfare & Benefits

Job Scope

• Understand the full requirements of all manufacturing and improvement project.
• Familiar with various laser systems as well as advance welding / cladding technique.
• Experience in robot programming for welding / laser cladding.
• Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.
• Generate PCR and manufacturing process plan.
• Generate engineering drawings and perform drafting.
• Support Asst. Engineering Manager on the job costing.
• Continuously explore for new manufacturing method or new external providers to support the production.
• Work closely with the Production team to resolve any production issue.
• Support the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

Requirement

• Diploma / Degree in Mechanical / Manufacturing Engineering or equivalent
• 1 - 3 years of relevant experience in metal machining or oil & gas industry

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Monthly salary $4000 + $6000 + Variable Bonus

• Company located at Woodlands

• Monday – Friday: 8:30am – 5:30pm

• Excellent Welfare & Benefits

• Well Established Industrial Automation Company (MNC)

Job Scope

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Requirement

• Degree in Mechanical Engineering / Mechatronics or related disciplines
• 4 - 6 years of relevant experiences in automation equipment design
• Experience in factory automation / electrical, pneumatic, and sensor component selections is an advantage
• Proficient in SolidWorks 3D software

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3200 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Transport Provided)
• Working days: Monday to Friday
• Working hours: 8am to 5pm

Job Responsibilities:

• To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance
• To monitor the safe process flow and backlog level of TIW waste
• Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs
• To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services
• To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost
• Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions
• Lead the daily safety toolbox meeting and regular inspection of PPE items that staffs at workplaces are enough for their safety
• Conduct periodic review of existing procedures and workflow of plant operations and functions in lines with cost effectiveness with maximum throughput
• Apply continues improvement or modification plans to maintain an excellent operational model.
• Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management
• To ensure EHS compliance through the continual maintenance and improvement of ISO 45001 implementation, and always maintain good housekeeping of site
• To prepare and analyze daily and monthly operation records/reports (e.g., cost, productivity, quality, non-conformance, etc) on plant processing and maintenance. And follow up necessary corrective actions and monitor consistently to relevant department staffs to follow up closely
• To compile annual budget of plant operations and Maintenance for Director’s approval and to ensure expenditures are well within the budget allotment
• To work closely with operation staffs and engineering staffs to develop and implement preventive maintenance schedule for operations and maintenance of machinery and equipment
• Regular briefing / training to be conducted to department staffs for safety handling of repacking loose waste, MSDS, PPE requirement and risk assessment before operations
• To activate emergency response team of operation and maintenance staffs and response to any in house spill and fire incident if in case of emergency
• To liaise with EHS department to ensure fellow dept staffs are upkeep with method of handling and emergency equipment usages in terms of spills and fire incident and to conduct regular practice and drill exercises with different scenarios to workers so that they are well familiar in emergency to response in time

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $3500 - $4000 + $1020 Transport Allowance + Incentive + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.15am to 5.30pm

Job Responsibilities:

• To market a full range of Professional & Industrial Cleaning equipment, and accessories & tools, to corporate customers, with an emphasis in oil and gas sectors
• Serve existing assigned accounts and prospect potential new customers
• Learn & familiarise our products well, understand users’ needs, and so be able to offer solutions and assistance to meet their requirements
• Perform hands-on product demonstrations, as well as occasionally conduct presentations to mid-size audiences including management levels
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Polytechnic Diploma or equivalent with 2 years of relevant experience
• Possess Class 3 driving license and own vehicle

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492