Job Responsibilities:

• Lead Process Engineering and design, process configuration and optimization studies
• Perform Process simulations, prepare Process/Utility Flow Diagrams, Heat and Material Balance, Utility Balance
• Create Piping and Instrumentation diagrams (P&IDs)
• Prepare datasheets for process equipment and instruments
• Conduct relief and blowdown studies, analyze relief load scenarios and calculate flare network requirements
• Perform process calculations for equipment sizing and line hydraulics
• Prepare Process design philosophies and operating guides

Job Requirements:

• Bachelor's Degree in Chemical Engineering
• At least 20 years of relevant engineering design experience
• Have worked on Concept studies, FEED and detailed design projects
• Good experience with Offshore Oil and Gas, and LNG terminal projects. Experience on Energy transition projects will be an advantage.
• Have led process teams on Hydrocarbon projects
• In-depth understanding of process design, heat and material balance and P&IDs
• Familiarity with international codes and standards, software and tools
• Candidates with Lead Engineer experience will be given preference

The key functions of Process Engineer is to:

• Applies engineering principles and techniques to optimise the production processes in a manufacturing environment to meet organization objectives
• Analyse and troubleshoots process engineering, manufacturing and /or maintenance issues and recommends engineering solutions, and develops work instructions for out of control processes
• Leads production and manufacturing systems improvement projects, and develops operation plans in accordance with organization objectives and other regulatory requirements.

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Mechanical /Microelectronics / Chemical Process / Chemistry / Physics/ Material Science/Material Engineering
• Min 7 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong leadership capabiity to lead and guide junior engineers
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

A Process Engineer specializing in powder coating oversees and optimizes the powder coating process, ensuring high-quality finishes and efficient, cost-effective production.

Work Location: Woodlands

Working hours: 830 - 530 (Mon to Fri)

Job Responsiblities

1. Process Design and Optimization Design and develop powder coating processes to improve efficiency, product quality, and cost-effectiveness. Optimize powder coating application parameters (e.g., thickness, adhesion, curing time) to ensure consistent, high-quality finishes. Implement best practices for color changes, coating uniformity, and waste reduction.

2. Quality Control and Compliance Set up quality control checks to monitor coating thickness, gloss levels, and durability. Conduct root cause analysis for defects such as orange peel, uneven coating, and contamination, implementing corrective actions. Ensure processes adhere to relevant standards (e.g., ASTM, ISO) and industry regulations on environmental safety and emissions.

3. Equipment Management and Maintenance Oversee the maintenance, calibration, and performance of powder coating equipment, such as spray guns, curing ovens, and booths. Work with vendors and maintenance teams to source and maintain equipment and ensure minimal downtime. Ensure that equipment settings are correctly adjusted for different product specifications and powder types.

4. Troubleshooting and Problem-Solving Diagnose and resolve issues such as coating defects, equipment malfunctions, or process inefficiencies. Develop contingency plans to minimize production disruptions. Collaborate with cross-functional teams (e.g., quality assurance, production, and maintenance) to address and resolve coating-related issues.

5. Process Documentation and Reporting Maintain detailed documentation of the powder coating processes, parameters, and changes. Create reports on process efficiency, quality metrics, and improvement initiatives. Develop standard operating procedures (SOPs) for powder coating applications and updates.

6. Continuous Improvement Initiatives Lead initiatives to improve process efficiency, reduce powder usage, and minimize waste. Utilize Lean, Six Sigma, and other continuous improvement methodologies to identify and address process bottlenecks. Conduct regular process audits and implement action plans to achieve ongoing improvements.

7. Safety and Environmental Compliance Ensure powder coating operations comply with environmental regulations, such as VOC emissions and waste disposal. Implement safety protocols to prevent hazards like dust explosions and chemical exposure. Train team members on proper handling and usage of powder coating materials and equipment.

8. Project Management and Coordination Manage powder coating projects, such as new product lines, equipment installations, or process upgrades. Coordinate with departments such as R&D, production, and quality to align process capabilities with business needs. Develop project timelines, resource plans, and budgets to ensure project objectives are met.

Requirements

- Bachelor’s degree in Chemical Engineering, Mechanical Engineering, or Industrial Engineering, or related field.

- Minimum of 2-5 years in powder coating or a similar surface finishing process.

- Familiarity with powder coating equipment and materials, process control, and quality standards.

Sophia Lu

R1100200

06C2812

Company Profile

M3’s client is an established company with many years of experience in the spray painting and powder coating services in Singapore. Looking to expand a new line production line for Sheet Metal.

Company Location

Woodlands

Working Hours

Mon – Fri: 830am – 530pm

5 day work week

Job Responsibilities

• Develop and optimize sheet metal manufacturing processes such as cutting, bending, stamping, punching, forming, welding, and assembling.
• Select appropriate tools, machinery, and materials for production.
• Create and refine process documentation, including process flowcharts, work instructions, and standard operating procedures (SOPs).

Job Requirements

• Technical Knowledge: Expertise in sheet metal materials, properties, and forming techniques.
• CAD/CAM Proficiency: Familiarity with software like SolidWorks, AutoCAD, or similar for design and simulation.
• Able to interpret engineering 2d Drawings.

Sophia Lu

R1100200

Senior Recruiter

Summary

We live in a mobile and device driven world where knowledge of the physical world around us is needed. We rely on this knowledge to get around, to learn about our environment and to enable spectacular new features for custom applications. Apple is meeting those needs as robustly and as creatively as possible and is interested in people who want to help meet that commitment. The success we are striving will be the result of very skilled people working in an environment which cultivates creativity, partnership, and thinking of old problems in new ways. If that sounds like the kind of environment that you find intriguing, then let's talk. These elements come together to make Apple an amazing environment for motivated people to do the greatest work of their lives. You will become part of a team that sets the standard in cultivating excellence, creativity and innovation. Excellent opportunity to join our Process Development team. The successful candidate will have opportunity to conduct feasibility studies, develop new process and material development for new module technologies under research and development. Will you help us design the next generation of revolutionary Apple products?

Description

• Work on process equipment to conduct proof of concept evaluation and DOEs
• Establishment of baseline process and metrics
• Perform process characterisation
• Establish design guidelines for manufacturability
• Define procedures and metrologies
• Generate engineering report base on studies and evaluation
• Reporting of engineering studies to cross-functional team

Minimum Qualifications

• Degree of Science in Engineering or equivalent
• Minimum 5 years of experience in doing process R&D
• Hands-on experience in various module assembly processes such as flip chip, flex attach, pick and place, dispensing, bonding, filling, laser soldering, component cleaning, curing, plating, singulation, wafer bonding.

Preferred Qualifications

• Good knowledge in design of experiment (DOE), engineering statistic, root cause analysis and problem solving
• Familiarity on different metrology tools and quantitative measurement methodology
• Clear and effective written and communication skill
• Resourceful and innovative
• Knowledge and work experience in one or more of the following processes & handling such processes equipment - 1) Flip Chip bonding (Thermosonic, Thermocompression and etc) OR 2) EVO die bonder, EVG and Suss process equipment OR 3) Flex Attach (Flexible Printed Circuit Board Bonding), Solder Jetting/Laser Wire Soldering OR 4) SMT (e.g. solder printing, component pick&place, AOI, SPI and reflow)
• Knowledge on adhesive or epoxy or other bonding material is an advantage
• Experience in optical components, active alignment and high accuracy bonding process is preferred

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Mon to Fri 8.30am - 5.30pm

Responsibilities:

• Prepare and execute all assigned validation and re-validation protocols, as well as engineering study protocols.
• Monitor and manage the validation and re-validation status of machines and systems.
• Monitor machine performance to ensure high quality and yield results.
• Improve process performance to maintain product quality and quantity.
• Ensure calibration compliance at all times to adhere to Quality System Regulation (QSR).
• Document and prepare monthly, bi-yearly, and annual calibration of requirements and tools.
• Support engineering team members and other departments with projects, yield improvement, validation activities, troubleshooting and engineering studies.
• Annually qualify and re-certify the sterilizers used in production.

Requirements:

• A degree in any engineering field.
• Minimum of 2 years of experience as a Process Engineer in the medical device manufacturing industry.
• Proficiency in mechanical and/or electrical engineering.
• Strong verbal and written communication skills.

Basic Responsibilities:

Ø Conduct research on Atomic Layer Deposition technology for perovskite solar cells

Ø Effectively execute related experimental arrangements.

Ø Participate in maintaining laboratory equipment.

Ø Design, execute, and analyze experiments, and submit reports and analyses as required.

Ø Strong written and verbal communication skills.

Ø Other responsibilities, and job description subject to change at any time.

Education/Experience:

Bachelor's or master's degree in engineering or a similar technical discipline, majoring in materials, chemistry, physics, electronics, or a similar field.

Required Skills/Competencies:

Ø Experience with ALD process is preferred.

Ø Some experience working in a chemical/material/semiconductor laboratory.

Ø Basic understanding of materials science, semiconductor device physics, and chemistry.

Ø Ability to handle complex data, analyze, and communicate results effectively.

Ø Ability to coordinate activities between various engineering and operations teams. Good verbal and written communication skills.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible to deliver robust and efficient semiconductor manufacturing process with data driven analytics and systemic problem-solving skills in the Wet Etch modules.

Key Responsibilities

• Maintain smooth daily manufacturing operations and problem solve issues promptly
• Actively collaborate with equipment and material suppliers and partners to identify technology deficiencies; develop, evaluate, and validate corrective and preventive solutions
• Qualify and sustain manufacturing processes to scale up capacity swiftly and maintain with quality and urgency
• Continuously improve process stability and capability, enhance quality, reliability, yield, productivity, and safety standards
• Design and execute experiments, analyze complex data sets, and derive actionable insights to optimize manufacturing processes and precise controls
• Implement statistical process control methods to establish and uphold robust manufacturing processes

Education Qualification & Essential Experiences

• Bachelor’s or higher degree in Electrical and Electronics Engineering, Chemical Engineering, Material Science, Physics or STEM related fields
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Integration diverse team of talent. You will be responsible to manage integration of all modules’ processes and the respective derivatives.

What you working on:

• To provide a leading role in the developing, transferring and maintaining of advanced CMOS fabrication technology with good process capability and high yield.
• Lead new technology transfer from mother fab or process development.
• Owner of new tapeout prototype lots and ensure 100% success rate.
• Drive process robustness improvement by providing root cause analysis and and collaborate improvement actions to meet 100% wafer acceptance test (WAT) Cpk goal & Baseline D0 target.
• Drive process excursion control by providing root cause analysis to modules and collaborate improvement actions to meet wafer acceptance test out of control % / out of specification % (WAT OOC%, OOS%) goal and single wafer low yield (SWLY) and single lot low yield (SLLY) goal.
• Collaborate with product engineer on product sensitivity related low yield and plan to do product specific process tuning to meet baseline D0 target
• Work with Customer Engineering to resolve customer complaints and provide customers with required information to meet customer concern and satisfaction & customer caution index (CCS & CCI) goal.
• Adhere to all FAB change management, safety & ISMS procedures
• Continuous improvement in d0, WAT performance, new tape-out (NTO) success and people efficiency.
• Ensure safety awareness
• Lead sub-team in x-functional continuous improvement projects.

More about you:

• Degree in Electrical/Electronics/Microelectronics/Material Science/Materials Engineering/Physics Engineering
• At least 2 years of relevant PI/Yield Engineering working experience in semiconductor manufacturing environment
• Strong understanding of device physics, advanced semiconductor process and SPC
• Strong analytical and problem solving skills to lead 8D team for corrective and performance actions
• Proficient in Microsoft business applications
• Proficiency in PROMIS system, Klarity ACE & DataPower will be an added advantage

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Your new company

My client (Central area) is recognized as a global leader in private wireless systems, being the go-to partner for Fortune 500 companies and industry innovators. Join their award-winning team and be part of a legacy of excellence!

Your new role

Join their innovative QA team as an Industrial Process Engineer, where you'll play a crucial role in optimizing electronic manufacturing processes. Collaborate with cross-functional teams to design, develop, and implement efficient, high-quality, and cost-effective processes.

Below are some of the key responsibilities for the role;

• Spearhead process development and optimization initiatives to enhance electronic product manufacturing
• Drive continuous improvement using Lean, Six Sigma, and other methodologies
• Oversee equipment management, installation, and maintenance for optimal performance
• Create and maintain detailed process documentation and provide training to production staff
• Ensure seamless integration of new processes and technologies with design engineers, production teams, and quality assurance
• Guarantee safety compliance and adherence to environmental standards

What you'll need to succeed

The successful candidate, should have;

• Bachelor's Degree in Manufacturing Engineering, Electrical Engineering, or a related field
• 3-5 years of experience in electronic manufacturing process engineering
• Proficiency in process simulation software, statistical analysis tools, and Python
• Strong problem-solving skills, attention to detail, and excellent communication abilities
• Knowledge of Lean Manufacturing, Six Sigma, and industry standards

What you'll get in return

• Joining a company that is at the forefront of their industry
• Being part of a team that's dedicated to innovation and continuous growth
• Working with the latest technologies, tools, and methodologies to develop innovative solutions

What you need to do now

If you believe you meet the specified requirements or know a suitable candidate, please click the link to apply. Alternatively, you may submit your application or referral directly to [email protected].

If this role isn't quite suitable for you, but you're interested in exploring new opportunities, I invite you to contact me for a confidential career consultation. I'm here to help you navigate your next career move.

EA Reg Number: R21102304 | EA License Number: 07C3924 | Company Registration No: 200609504D

Our client, a well-known Japanese company is looking for candidates for the Process Engineer position.

Responsibilities: -

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Responsibilities:

• Preparation of process scheme/process flow diagram/FEED and process description
• Familiar with material and heat balance calculations and thermal rating of heat exchangers
• Development of process data sheets and able to perform NPSH/hydraulic calculation and equipment and line sizing
• Participate in Hazop Study and develop the P&ID
• Prepare material selection diagram and establish requirements for any chemicals, solvents and catalyst
• Perform relief valve sizing, control valve sizing and popping philosophy
• Prepare the equipment and line list and review the various equipment and instrument data sheets
• Interface/coordinate with other discipline for design development

Requirements:

• Degree in Chemical Engineering
• Minimum 8 years of design experience for process system in the oil and gas, chemicals storage and process environment. Candidate with more years of relevant experiences may be consider for a lead position.
• Familiar with respective code of practices for process design and fire protection such as API, NFPA, SS532, SS634 etc.
• Able to lead the process team

Purpose: Strategic planning and develop cost effective & low risk manufacturing/assembly process steps/planning from raw material to completion including special processes through Product Quality Plan(PQP).

Key Area of Responsibilities:

• Transfer of Project, Technology, System from customer to VDL for New product development.
• Feasibility study for New Assembly.
• Identify the facilities/supplies required for the assembly.
• Define and establish Project Plan for Assembly to meet on time delivery.
• Resolve technical issues in assembly to ensure smooth production.
• Manage technical changes to fulfill customer requirement.
• Implement improvements to processes for cost effectiveness.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical or Precision Engineering or other relevant discipline.
• Minimum 3 years of experience as a process engineer in the Contract Manufacturing industry or equivalent.
• Mechanical and electrical workmanship
• Experience in working in cleanroom will be an advantage
• Good problem-solving skills
• Proficient in Microsoft Excel functions
• Good communication skills

Our client, a well-known Japanese company is looking for candidates for the Process Engineer position.

Responsibilities: -

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Process Engineer (Biologics) - Job Scope

The successful candidate will apply process engineering knowledge to support new product/process introduction and/or commercial protein biologics processes. Scope of work would include:

Data Analysis:

• Compile and analyze process data using tools such as Excel and Minitab.
• Verify data in technical reports and spreadsheets.

Process Optimization:

• Consolidate and compare cell culture and purification process manufacturing practices for the purpose of facility fit and identification of areas for optimization and alignment across manufacturing sites.

Cross-functional Collaboration:

• Participate in teams and collaborate cross-functionally with representatives from other functions and sites to support drug substance manufacturing process alignment.

Meetings and Presentations:

• Organize and conduct meetings, actively creating, generating, and presenting data/conclusions at internal and cross-functional meetings.

Technical Documentation:

• Support authoring of technical protocols and reports.

Lab Support:

• Support small-scale cell culture or purification studies while ensuring safe operation of process development (PD) activities in the laboratory.

Qualifications

• Educational Background:Degree in Chemical Engineering, Bioprocess Engineering, or Biochemistry.
  
• Skills:Possess a basic understanding of biologics and chemical engineering principles.
  Demonstrates independent motivation but also works well in a team environment.
  Exhibits excellent written and verbal communication skills.
  

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description

• Perform process/ mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, equipment specification/data sheet, etc
• Provide process / mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Perform technical review of equipment/system vendors’ proposal and submission during procurement detailed design and installation stages
• Prepare the process / mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the equipment suppliers / subcontractors to meet the project schedule for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor degree in chemical/Environmental/Mechanical Engineering
• Minimum 4 Years’ experience in process/mechanical design of water/wastewater treatment plant (design experience in the flue gas desulphurization (FGD) wastewater system/plant (or similar system/plant) would be advantageous); For senior position, candidate must have at least 8 years of relevant experience
• Familiar with relevant standard and Singapore code of practice
• Possess strong inter-personal and communication skills
• Must have advanced computer literacy in commonly used software applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Requirements:

1. Proficiency in SolidWorks for creating in-process models, process sheets, and operation instructions.
2. Experience with SolidCAM software for generating NC programs for 3- and 4-axis machines.
3. Familiarity with Mazak and Fanuc controller systems. (NC Program)
4. Strong understanding of GD&T (Geometric Dimensioning and Tolerancing) in technical drawings.
5. Excellent communication skills in both English and Chinese.
6. Proficiency in Microsoft Excel, Word, and PowerPoint for preparing documentation.
7. Minimum of 3 years experience in precision engineering.

Sales Engineer offers specialized chemistry programs and related services for downstream oil and gas operations, aimed at maximizing production, protecting assets, and reducing operating costs and environmental impact. Through on-site problem-solving and innovative technologies, our team delivers solutions that assist energy customers in overcoming complex challenges in the most demanding energy frontiers. Our downstream team utilizes advanced chemistries and technologies to provide Oil & Gas customers with comprehensive and sustainable solutions to safeguard their assets, mitigate risks, and enhance profitability

Responsibilities:

• Leading Chemical Treatment Programs: Responsible for the chemical treatment programs at the client’s site, ensuring optimal performance and promptly addressing any deviations from the treatment plan.
• Analytical Field Testing: Comprehend the principles of field testing procedures and collaborate with service technicians to perform routine field testing
• Reporting and Communication: Provide regular chemical treatment program reports to clients, keeping them informed about progress and updates according to the agreed schedule.
• Inventory and Equipment Management: Oversee the planning of chemical stock levels in Singapore and manage inventory at client sites. Maintain an equipment maintenance program to ensure 100% equipment uptime and seamless operations.
• Monthly Technical Review: Prepare and deliver comprehensive monthly review materials to clients. These reviews serve as a valuable platform for discussing program effectiveness and identifying areas for improvement.
• Value-Added Projects: Actively source and develop value-added projects in collaboration with clients. These projects are designed to reduce the Total Cost of Operation (TCO) with Ecolab’s product.
• Troubleshooting and Collaboration: When clients encounter challenges related to chemical treatment programs or Ecolab’s products, step in to troubleshoot and collaborate with team members to find solutions.
• Proposal Development for New Opportunity: Develop chemical treatment proposals to enhance efficiency and address specific client requirements. Present new chemical treatment proposals to client. Lead the initiation and evaluation of new applications.
• Contract Management: Collaborate with application engineers and service technicians to ensure compliance with contractual obligations.
• Business Performance Review: Prepare and present the executive performance results material to the key client stakeholders and the head of the department. This can occur quarterly, half yearly or annually depending on contract obligation.
• Client Relationship Management: Building and nurturing strong relationships with clients is paramount. Frequent engagement ensures effective communication and mutual understanding.
• Billing and Invoicing Process: Maintain bookkeeping for client accounts under your responsibility. Verify billing amounts and work with the billing team to issue invoices to customers.

Requirements:

• Bachelor’s Degree (Chemical Engineering) with at least 8 years of relevant technical Sales & Service experience
• Should have technical sales or field sales support experience
• Must have a valid Class 3/3A Singapore Driver’s License
• Working knowledge of boilers, cooling towers, and wastewater treatment systems
• Experience with refinery or chemical processing is advantageous
• Curious and eagle to find out what customers’ needs and good approach to solutioning
• Effective critical thinking and problem solving skills
• Customer oriented and always ready to engage with customers
• Able to work in a refinery/chemical plant

The research and development engineer will focus on scaling up and optimizing the solution-based perovskite solar module fabrication.

Key Responsibilities are listed as following:

• Material Development: Formulate and optimize perovskite precursor solutions to achieve high-performance thin films with excellent uniformity, crystallinity, and stability.
• Process Optimization: Develop and refine large area solution-based deposition techniques such as slot-die coating, inkjet printing, and blade coating for scalable production.
• Device Fabrication: Design and fabricate perovskite solar cells, including single-junction and tandem architectures, using solution-based processes.
• Characterization: Perform advanced characterization of solution-processed materials and devices, including optical, electrical, and structural analysis using techniques like UV-Vis spectroscopy, SEM, XRD, PL, and IV testing.
• Stability and Reliability: Investigate degradation mechanisms of solution-processed perovskite layers and develop strategies for improving device stability and reliability under operational conditions.
• Innovation: Explore new solvents, additives, and processing conditions to enhance performance and scalability of solution-based perovskite materials.
• Collaboration: Work closely with cross-functional teams, including material scientists, device engineers, and manufacturing teams, to align research outcomes with production goals.
• Documentation and Reporting: Maintain detailed records of experiments, analyze results, and prepare technical reports, presentations, and publications.

Qualifications:

· Bachelor or Master’s in Materials Science, Chemistry, Chemical Engineering, Physics, or a related field.

· Demonstrated expertise in solution-based perovskite synthesis, thin-film deposition, and device fabrication.

· Experience with solution processing techniques, such as spin coating, slot-die coating, or inkjet printing.

· Experience with drying processing techniques, air-knifing, VCD and oven annealing.

· Proficiency in materials and device characterization techniques, including SEM, XRD, UV-Vis, and IV measurement.

· Strong understanding of perovskite chemistry and degradation mechanisms.

· Excellent analytical, problem-solving, and critical-thinking skills.

· Ability to work independently and collaboratively in a fast-paced research environment.

Preferred Skills:

• Familiarity with large-area coating processes for scalable production.
• Experience in tandem solar cells or integration with other photovoltaic technologies.
• Knowledge of industrial-scale solution processing methods like roll-to-roll fabrication.
• Proficiency in simulation tools for solar cell design and analysis.

Education & Experience:

• Bachelor's or Master's degree in Mechanical Engineering, Mechatronics, or a related field.
• Proven experience in designing and improving mechanical systems, preferably in the food and beverage or automation industry.

Technical Skills:

• Strong understanding of mechanical design principles and optimization techniques.
• Proficiency in CAD software (e.g., SolidWorks, AutoCAD) and simulation tools.
• Knowledge of materials science and its application to juice extraction mechanisms.
• Familiarity with automated vending machines or juicing equipment will be advantageous

Problem-Solving & Innovation:

• Demonstrate ability to identify inefficiencies and develop innovative solutions.
• Analytical mindset with attention to detail and a passion for continuous improvement.

Communication & Collaboration:

• Excellent communication skills to present technical concepts to diverse audiences.
• Strong team player with the ability to work collaboratively across departments.
• Willingness to travel occasionally for factory visits or international collaborations.

Responsibilities:

• Oversee wafer manufacturing to meet quality, yield, and production targets.
• Collaborate globally on process alignment and qualification of new processes, suppliers, and consumables.
• Work with cross-functional teams to enhance process capability and yield.
• Coordinate troubleshooting for process issues and yield losses.
• Drive continuous process improvements and resolve chronic quality issues.
• Develop best practices and innovative solutions for ongoing improvement.
• Conduct statistical data analysis for process improvement and data interpretation.
• Utilize problem-solving techniques (8D, Fishbone, DOE) and risk assessment tools (FMEA).

Requirements:

• Degree in Engineering or equivalent.
• Knowledge of quality management systems, data analysis, DOE, and SPC
• Proficient in statistical software (e.g., JMP).
• Experience with Visual Basic, databases, and queries (preferred).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628