As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

• 5 days, Boon lay, Transport provided to & fro
• $4200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• Medical/dental benefits (insurance covered)

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Responsibilities

• Review engineering deliverables from detailed engineering consultant / equipment vendors to ensure to meet client specifications
• Coordination with detailed engineering consultant or design, client, vendors, sub-contractors and third party specialists
• Monitoring, reporting ad driving engineering process
• Conducting and attend P&ID design review, HAZOP (Hazard and operability study), SIL (Safety integrity level) and 3D model reviews.
• Monitor and drive the closing out of punch lists after design review / HAZOP (Hazard and operability study).
• Supporting procurement team on technical issue with vendors, Construction team during construction phase on site checks and commission team during plant or sub system start-up.
• Function assigned by Department managers.

Requirements

• Bachelor Degree in Chemical engineering or related disciplines
• Experience in Marine/Oil & Gas will be an added advantage
• Knowledge in HYSYS, SmartPlant P&ID
• Able to handle work under tight schedule
• Good sense of Contractual Knowledge

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

(Pioneer Yard)

50 Gul Road, Singapore 629353

(Islandwide transport provided)

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Working hours

(All Yards)

Monday – Thursday: 8:00am – 5.15pm

Friday: 8:00am – 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career. This role focuses on developing world-class engineering solutions that meet the unique challenges of biotech production.

In this position, you will provide support to Process Engineers in the characterization of new and existing products, maintaining and improving metrology tools, and ensuring process excellence in a high-volume biotech production setting. You will collaborate extensively with various departments including Manufacturing, Equipment Engineering, Analytical Sciences, Facilities, Supply Chain, and Quality Assurance to support new product releases and continuous process improvement.

Scopes & Responsibilities

• Assist Process Engineers in troubleshooting, sustaining, and continuously improving production lines for consumables related to new product development, yield, quality, and throughput.
• Design and execute controlled experiments to optimize processes, while documenting and analyzing results.
• Support MES ticket handling and process verification/validation activities.
• Conduct nonconforming material analysis and investigations.
• Recommend and implement process improvements to meet production goals across multiple operations and technologies.
• Coordinate execution of equipment and process validation, data collection, and report summarization.
• Collaborate with Engineering/R&D teams to develop and refine processes for new and existing products.
• Maintain and update technical documentation, including technical requirements, drawings, and work instructions for engineering and consumables production lines.

Qualifications

• Diploma or Bachelor’s degree in Engineering, Sciences, or related field.
• Experience in manufacturing within a FDA-regulated environment is advantageous.
• Strong understanding of manufacturing processes within a regulated biotech or medical devices environment.
• Ability to execute test plans for components, materials, systems, and processes effectively.
• Proficient in Microsoft Office Suite (Word, Excel, PowerPoint).
• Experience with product & process feasibility studies, line validation, qualification, and process optimization.
• Excellent team collaboration, interpersonal, and communication skills.
• Strong documentation and technical report writing abilities.
• Ability to manage stress and handle multitasking across functions effectively.
• Proactive, innovative, and self-motivated.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

YOUR ROLE

The Regional Procurement role is designed to drive the development, implementation, and continuous improvement of procurement and PTP (Procure-to-Pay) processes across the region. This role ensures alignment with global policies, processes and standards, while adapting to regional specifics and regulations. The person will lead & coordinate transformation initiatives, support operational excellence, and facilitate the deployment of effective procurement solutions within the region. By creating strong relationships with key stakeholders, providing subject matter expertise, and monitoring performance metrics, this role aims to enhance the efficiency, effectiveness, and overall success of procurement and PTP activities within the region

WHAT ARE YOU GOING TO DO?

Projects / Solution development

Support the development of regional procurement and PTP projects/solutions (e.g., global/regional policies, processes, and tools) by:

• Adapting Global Projects: Mapping global projects/solutions to regional circumstances and regulations, identifying necessary exceptions/modifications to ensure proper integration within the region.
• Defining Transformation Roadmaps: Creating detailed plans for transitioning countries to new solutions.
• Subject Matter Expertise: Acting as an SME for project stakeholders, identifying gaps, and providing solutions/workarounds for existing and new processes, systems, and tool implementations

Projects / Solution deployment

Support the deployment of regional procurement and PTP projects/solutions by:

• Documentation and Progress Tracking: Developing and maintaining project/process documentation (including translations if needed), managing, and tracking procurement project progress.
• Training and Coordination: Providing training and coordinating activities within countries to ensure the successful embedding of new solutions.
• Communication Cascade: Disseminating global procurement and PTP communications to the countries.

Run & Maintain

Support ongoing procurement and PTP operations within the region by:

• Document Management: Timely and accurate updating of operational documents (e.g., approval matrices) essential for effective procurement and PTP processes.
• Process Assessment and Improvement: Conducting process assessments, quantifying the impact of process pain points through data analysis, and defining improvement projects.
• KPI Monitoring: Monitoring regional KPIs and initiating improvement projects/actions when scores fall below target (e.g., Supplier Data Quality Index - DQI).
• Training and Knowledge Management: Identifying knowledge gaps in procurement and PTP operating models, preparing and conducting training sessions with stakeholders to address these gaps.
• Improvement: Identifying areas of improvement at regional and implement defined action plans
• Stakeholder Engagement: Developing and maintaining strong relationships with key stakeholders within procurement, PTP, and other functions to enhance the efficiency and effectiveness of people, processes, and tools

WHAT ARE WE LOOKING FOR?

Education & Qualifications

• University Degree or equivalent qualification

Experience

• At least 3 years of relevant procurement process and project management experience; knowledge of continuous improvement and change/project management concepts. Proven experience in developing/ deploying/ improving Procurement processes, policies, systems, and tools.

Specialist Knowledge & Skills

• MS Office incl. Visio; experience and working knowledge of project management tools; sound knowledge of process design, drafting, and documentation.

WHAT DO WE HAVE TO OFFER?

With a genuine culture of reward and recognition, we want our employees to grow, develop and be part of our journey. There’s no doubt that you will be compensated for your hard work and commitment so if you’d like to work for one of the top Logistics providers in the world then please do get in touch to find your next role.

ABOUT TOMORROW

We value your professional and personal growth. That’s why we share plenty of career opportunities for you to thrive within CEVA. Join CEVA for a challenging career.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 to S$50,000)

• Ensure safe and optimal operation of process units
• Ensure workplace safety by proper asset upkeep, supporting function testing on safeguarding system and proper control on work activities in the plant
• Participate in plant shutdown & start-up and process unit troubleshooting work activities

• Diploma or NITEC in Chemical Process Technology (Petrochemicals or Pharmaceuticals) OR
• At least GCE "O" level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE / Polytechnic engineering graduates are welcome to apply as training will be provided

Job Description

• Oversee various stages of full project deliveries covering requirements gathering and analysis, design, construction, delivery, integration, testing, commissioning, and maintenance services
• Map out the overall project management plan and ensure that the roles and responsibilities, objectives, commitment, deliverables, schedule, and risks are clearly defined and communicated to team members and customers
• Establish a risk management plan for a structured approach to identify and review potential risks and mitigation actions
• Manage project budget and costs with the objective of maximizing revenue and margin achievements.
• Establish a project execution plan and schedule for tracking of deliverables within the scheduled milestones
• Build a high-performance delivery team, comprising both onsite and offshore resources, and provide effective leadership for the team members
• Oversee the entire project delivery life cycle within scope, schedule, and budget
• Maintain a pro-active and responsive relationship with all stakeholders, both internal management and customers, to provide regular and accurate progress updates, problem reporting and resolution processes
• Perform other duties as assigned

Requirements

• Min Degree in Mechanical / Electrical / Environmental Engineering (Degree must be recognized by the Professional Engineers Board, Singapore)
• At least 10 years of relevant experience in the implementation and management of qualify control systems
• Hands-on” attitude, meticulous and analytical with excellent problem-solving skills
• Professional project management certification (e.g. PMP, CITPM, etc) is preferred
• Team player with good interpersonal and communication skills
• Able to work under pressure, resourceful and independent with good negotiation skills

Location: Singapore

Employment Type: Full-Time

Job Overview:

We are seeking a motivated Associate Consultant specializing in Business Process Re-Engineering (BPR) to optimize and redesign business processes for improved efficiency. This role involves evaluating workflows, recommending improvements, and supporting implementation efforts.

Roles and Responsibilities:

• Conduct comprehensive process analysis to identify inefficiencies.
• Gather, document, and evaluate business process requirements.
• Assist in designing and implementing streamlined workflows.
• Collaborate with stakeholders to define key performance indicators (KPIs).
• Support the development of process documentation, including SOPs and process flow diagrams.
• Monitor project progress and ensure adherence to timelines and goals.
• Facilitate change management initiatives for process improvement.
• Prepare reports and presentations for management review.

Qualifications and Skills:

• Bachelor’s degree in Business, IT, or a related field.
• Strong analytical and critical-thinking skills.
• Proficiency in process mapping tools and business analysis methodologies.
• Excellent communication and stakeholder management skills.
• Minimum Experience: 3+ years

About TUMCREATE

TUMCREATE is a multidisciplinary research platform of the Technical University Munich (TUM) at the Singapore Campus for Research Excellence and Technological Enterprise (CREATE). We are joining forces with universities, public agencies, and industry for the advancement of future technologies.

Our large-scale Food Science program, ‘Proteins4Singapore,’ funded by Singapore’s National Research Foundation (NRF), is a collaborative effort between the Technical University Munich (TUM), Nanyang Technological University (NTU), the Singapore Institute of Technology (SIT), and A*STAR’s Singapore Institute of Food and Biotechnology Innovation (SIFBI). As part of the Proteins4Singapore team, you will work alongside renowned scientists in plant and food technology, food chemistry, materials science, and business sustainability. Through interdisciplinary collaboration, the program aims to develop state-of-the-art methods and techniques to ensure a sustainable protein supply for highly urbanized environments.

Please visit www.tum-create.edu.sg for more information about TUMCREATE.

Job Summary

We are seeking a highly motivated and skilled Research Fellow to join our dynamic research team focusing on designing, adapting, and implementing cutting-edge mechanical and electronic systems for a decentralized food manufacturing model. As part of the Proteins4Singapore project, this role involves on utilizing simulations and advanced control systems to optimize and ensure quality in novel food textures and forms. This position plays a critical role in advancing sustainable protein solutions for urban environments through interdisciplinary collaboration, drawing expertise from mechanical engineering, mechatronics, and food engineering. This is a 1-year contract with the possibility of extension after the first year.

Key Responsibilities

• Develop a closed-loop control system to synchronize high-moisture extrusion and shape manipulator systems with a seamless integration and quality assurance.
• Integrate a variety of non-invasive sensors for a continuous and active monitoring on a food shape manipulator system.
• Develop and adapt custom firmware to integrate extrusion, in-line monitoring and control system with software protocols.
• Work closely with interdisciplinary teams to combine multiscale structural analysis with food processing methods, such as 3D printing and extrusion, supporting the project’s overarching goals of promoting sustainable food technologies and creating novel approaches for analyzing food texture.
• Engage in collaborative research, data analysis, and interpretation, while contributing to the writing of research papers, reports, and presentations for dissemination at conferences and in peer-reviewed journals.
• Participate in lab meetings, seminars, and collaborative research discussions to align with project goals and objectives.
• Supervise junior group members including undergraduate and doctoral students.

Key Competencies

• Proficient in firmware and software development, with experience in real-time systems, control algorithms, and open-source platforms.
• Strong background of at least 3 years in mechatronics, electronic systems, and automation; ideally experience with CFD, FEM simulations, and rheology for material flow analysis.
• Experience with food processing technologies, particularly food-grade and semi-solid materials, and a focus on safety and user-centric design.
• Publication as key author in related journals.
• Excellent communication skills, both written and verbal, in particular communication of complex scientific concepts to both specialists and non-specialists in a multidisciplinary research environment.
• Proven ability to conduct independent research and collaborate in multidisciplinary teams including working effectively within deadlines.
• Self-motivated and adaptable, with strong problem-solving skills and the ability to thrive in a dynamic, fast-paced research environment.

Qualification Requirements

• Ph.D. in Mechanical Engineering, Mechatronics, Food Processing, Industrial Engineering, or cognate discipline from a reputable university.
• Demonstrated ability in firmware programming and real-time process control integration.
• Strong communication skills, both verbal and written, with the ability to document processes and present findings effectively.

What we offer

• A collaborative and inclusive research environment.
• Access to state-of-the-art laboratory facilities and equipment.
• Opportunities for professional development and career growth.
• Engagement with a leading research team committed to advancing an emerging topic of global relevance.

Applications

Please send your complete application including a cover letter and detailed CV to [email protected].

Only shortlisted candidates will be contacted.

We are looking forward to your application!

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are “Solar’s most trusted”!

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.
• Support production line issues with appropriate and permanent corrective solution, as and when necessary.
• In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.
• Support investment proposals and projects in order to utilize best available practice and competence.
• Support managements’ directives and projects as and when needed.
• Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Module PD Engineer

• Candidate working in Module PD is responsible for development of the bill of materials (BOM) used in the PV module.
• Responsible for redesign of parts for cost and process improvement through alternative components, parts reduction, jigs and fixtures, and increasing yield, reducing cycle time and improving quality
• Excellent knowledge in material structure performance and provide direction of how best the appropriate materials could be introduced and change to meet the overall cost targets.

Knowledgeable in establishing, sourcing and developments of new materials, new designs and alternative vendors (such as Glass, EVA, Back Sheet, Frame, junction box, etc.) to meet the overall process, production and cost improvement targets.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline )
• 3 years or more experience for engineer position
• 7 years or more experience for senior engineer position
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or Solar.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

• Independently plan, conduct, and coordinate process assurance assignments, involving waterfall and agile projects.
• Review progress and evaluates results, which are communicated to the Project Manager and key stakeholders.
• Independently leads and plans interaction with project managers and delivery leads to establish/execute process assurance plans.
• Plans and implements recommendations for major improvements to existing processes and procedures.

Key Requirements

• Degree in computer science/engineering or related disciplines.
• 1-2 year of Audit / Technology Risk (IT Risk) Management experience.
• Ability to communicate plans and deliver timely effective information to leadership and key stakeholders.
• Strong written and verbal communication skills.

You will be part of our Process + Systems team adding your expertise + skills to the delivery of customer + operational excellence.

WHAT WILL YOU BE DOING ON A DAILY BASIS?

Your primary objective is to manage + execute all the related activities of process analysis, project management, supporting with documentation + business process modeling in compliance with company standards.

• To provide guidance and enforcement to countries on adopting and executing all globally aligned processes and procedures.
• To participate in strategic projects with management to drive operational excellence organization.
• To drive process improvement, process re-engineering + support the implementation of changed processes.
• To collaborate with other corporate functions to ensure business needs are identified + translated into technical solutions.
• To support the implementation of best practices + methodologies to the major organization stakeholders.
• To support + coordinate near shoring activities to the global shared service centers
• To drive OPEX reductions through adoption of e-solutions, standard processes and compliant tasks allocation.
• To identify knowledge gaps with countries and collaborate with corporate functions to ensure same are closed

The Opportunity:

• Our client, Government Science Agency
• Great learning exposure, training provided!
• Basic Salary: Up to $2,500
• Working hours: 9AM - 9PM, assigned as per shift
• Multiple vacancies available!

Job Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers.
• Monitor basic equipment/process errors and perform recovery.
• Work with parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.

Job Requirements:

• Proficient in operating semiconductor equipment and basic troubleshooting.
• Experience in semiconductor manufacturing or wafer processing is a plus.
• Able to transport wafers in cleanroom and coordinate logistics.
• Independent, responsible, and able to work in a team.

Next Step:

• Prepare your updated resume
• Simply click on 'Apply here' to drop your resume.
• All shortlisted candidates will be contacted.

Jason Ng
Direct Line: 6697 7967
EA License No: 91C2918
Personnel Registration Number: R23113333

About our group:

The Media Process Team is at the forefront of innovation, specializing in lubricant application and UV curing technology for enhanced product reliability. Our tape burnish division leverages advanced equipment, along with a myriad of tape materials and abrasives, to ensure exceptional surface quality vital for low flying height testing.

About the role - you will:

• Provide comprehensive support in Media Back End process
• Ensure media manufacturing conformance to the process flow, specification and procedure
• Implement effective process control and audit to ensure product and process compliance/conformance
• Conduct root cause analysis for process issues
• Conduct experiments for yield/process improvements
• Support the setup, troubleshoot and qualification of backend process equipment
• Provide technical assistance to Production Manufacturing Specialists

About you:

• Possess a Diploma in any Engineering discipline.
• A good team player with positive attitude and self-initiative
• Have good interpersonal, communication, problem solving & data analysis skills
• Self-motivated and able to work independently
• Are prepared to work in a Cleanroom Environment
• Are prepared to work in night shift

Your experience includes:

• Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint)
• A strong knack for data analysis and acquisition techniques
• Familiar with Statistical process control and manufacturing workflow

Location:

Our Woodlands site is one of the largest electronics manufacturing sites in Singapore, housing our recording media operations. Spread over three sites, it is easily accessible via bus or from the MRT Station, with many employees taking mass transportation to work. Here at work, you can enjoy breakfast, lunch, dinner, and snacks at our onsite canteen and coffee shop. We offer a range of facilities including an in-house gym and dance studio, as well as after-work badminton and table tennis competitions. On-site celebrations and community volunteer opportunities also abound.

Location: Singapore

Employment Type: Full-Time

Job Overview:

We are seeking a Senior Consultant specializing in Business Process Re-Engineering to lead transformative projects and drive operational excellence. The role involves managing large-scale re-engineering projects and guiding clients toward strategic improvements.

Roles and Responsibilities:

• Oversee end-to-end business process re-engineering projects.
• Lead cross-functional teams in developing innovative process solutions.
• Conduct in-depth business assessments to identify improvement opportunities.
• Define project scope, goals, and deliverables in collaboration with clients.
• Develop and present business cases and executive-level proposals.
• Ensure compliance with industry standards and organizational policies.
• Mentor junior consultants and provide expert guidance on best practices.
• Stay updated with industry trends and emerging process optimization technologies.

Qualifications and Skills:

• Bachelor’s degree in Business, IT, or a related field.
• Industry certifications such as Six Sigma, PMP, or Prince2 are highly desirable.
• Expertise in business process modeling, operational strategy, and change management.
• Exceptional leadership and client engagement skills.
• Minimum Experience: 6+ years

Highlight:

• Permanent job opportunity
• Great remuneration & benefits
• Great career progression
• Fun & fast pace environment
• With working experience in Global Freight Forwarding company is preferred.
• Location: Central

Responsibilities:

Logistics Project Planning and Implementation Management

• Recommend the appropriate logistics automation solutions that align with customer requirements, aiming to achieve quality objectives, service standards, and inventory accuracy.
• Execute the implementation plan, including sourcing, proposal development, feasibility testing, technical specification assessments, purchasing automated warehouse equipment, and setting up the new warehouse.
• Collaborate with the Logistics Systems Integration Engineer to develop an automation technology database to monitor capacity, costs, and system connectivity.
• Plan and manage the complete project lifecycle, including timelines, budgets, and resource allocation.
• Provide user training for key users to ensure successful adoption of the new systems.

Enhancement of Logistics Automation Process

• Establish KPIs and evaluate the performance of the applied automation equipment to determine achievement rates.
• Identify process exceptions, develop recommendations, and implement process improvements.
• Monitor and report operational performance, including work efficiency, ROI analysis, and productivity, to management.

Logistics Automation Consultation

• Explore new automation technologies (software and hardware) and stay updated on the latest market trends to develop relevant strategies.
• Conduct operational simulations to enhance capacity by implementing optimal automation solutions for customers.
• Collaborate with internal and external stakeholders i.e external suppliers/ technology consultants/ equipment suppliers.
• Support Regional Head Quarter with any other Logistics Automation Optimization assignment.

Requirements:

• Bachelor’s degree with major in Industrial Engineering, Operations Research, supply chain and logistics management or related technical engineering field.
• Minimum 8+ years of related working experience in Global Logistics Company (Minimum 6+ years' experience is required for Master degree holder).
• Work experience in Global Freight Forwarding with experience in setting up automation solutions in in a logistics environment and relevant role (design warehouse automation equipment such as ASRS, AGV, DPS, DAS, etc. and setup warehouse) is a must.
• Deep understanding of Global Logistics Automation, WMS/WCS.
• Proficient in Logistics Automation Simulation.
• Able to select Optimal option and application for automation equipment.
• Good in warehouse automation layout design by using tools such as Autocad, Sketchup, CAD.
• Experience in end to end project management.
• Experience in developing and applying New technology for Logistics Automation
• Logistics Center Operation experience.
• Experience in leading projects by simulating using Automode, Flexsim, Arena.
• Experience in carrying out optimization part (Operation Research) Projects.

HOW TO APPLY:

Interested applicants, please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Dick Sern (Dick Sern)

EA Personnel Reg No: R22106832

Help us get ahead of disease together with our Vaccines MSAT (Manufacturing Science & Technology) team.

Education required: Diploma in Biotechnology or another relevant field.

Language requirement: Written and spoken fluency in English
Application deadline: We will close this vacancy when we have enough applications, so please apply as soon as you can so your application can be considered.

Looking to gain valuable real world work experience and help positively impact the health of billions of people? Apply for a GSK Traineeship today!

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

A certificate will be given to successful trainees upon completion of the programme.

What will you do?

The MSAT process science technician’s role is to support the scientists in various process development and process evaluation studies via various tasks such as inventory management, buffer preparation, trial execution and sample management.

• Management of MSAT Process Science facility
• Support qualification of MSAT Process Science equipment
• Support process development / evaluation trials
• Sample management
• Support Environment. Health, Safety and Wellness initiatives

What will you learn?

• Develop strong scientific understanding for process development of various vaccines portfolio.
• Master important skills for laboratory management such as inventory and sample management
• Run process development trials independently and interpret trial outcomes

What are we looking for?

• Diploma in Biotechnology or another relevant field preferred.
• Relevant experience in the bio/pharmaceutical industry in Production, Process Development, Quality Control, R&D or MSAT is a plus.
• At least 2 years' experience in bio/pharmaceutical industry.
• Good knowledge of safety and environment regulations. Good communication skills.
• Good documentation skills.
• Good command of English (verbal and written).

What do we offer you?

• Understand and experience the GSK Culture
• Work with a diversified team of professionals.
• Implement technical knowledge and skills that you have acquired at school
• Apply and develop soft skills such as interpersonal, communications and negotiation skills
• Transport to and from site to MRT stations in centralised locations all across Singapore (only for manufacturing sites)

We are hiring a Contract Process Technician to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Responsibilities

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.
• Ensure proper communication and handling over of shift duties.

Requirements

• Minimum Diploma/NITEC in Chemical Engineering or related fields preferred.
• Immediate commitment preferred.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

Location: Tuas with Islandwide pick up
Working Hours: 2-2-3 (8am - 8pm/ 8pm - 8am)
Duration: 1 yr contract
Salary: Up to $3200 + Transport and shift allowance + Completion bonus

Job Scope:

• Able to handle manual work such as lifting, carrying, shifting, transferring of materials/chemicals.
• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.
• Ensure proper communication and handling over of shift duties

Job Requirements:

• Min. Nitec/ Diploma in Chemical/ Chemical engineering or any relevant field
• Able to start immediate or within a short notice

For interested applicants, please send your updated resume to: [email protected]
All candidates’ information will be treated with the strictest confidence
Melissa Zhang Zhiqi (Mezzo)
R2197564
Recruit Express Pte Ltd
99C4599

• Overall, in-charge of the terminal operations to ensure efficient and safe operations.
• Responsible for the department's resources and budget to meet the company's objectives.
• Display all-aspect service excellence by elevating the organisational behaviour, culture and thinking in service design, planning, execution and follow-up on operational matters.
• Create ideas to develop the annual and long-term business plans, forecast performance and develop business case for new projects and estimate financial and resources required to deliver performance targets.
• Monitor and evaluate operations on site are carried out in accordance with safety, health, environment and loss preventive policies, rules, regulations and according to company’s standards.

Requirements:

• Degree in any relevant engineering discipline.
• At least 5 years of terminal operations experience in Oil & Gas/Chemical Process Plant.
• Strong knowledge in operational process, safety and product knowledge.
• Proven leadership and people management skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• assist in manual work such as lifting, carrying, shifting, transferring of materials/chemicals.

• Perform production activities such as raw or intermediate material receiving, staging, material movement, dispensing, sampling, filter inspection, material charging, offloading, drum packing, milling operations, housekeeping as per SOP.

• Ensure proper communication and handling over of shift duties

Requirements:

• Minimum Diploma/Nitec in Chemical or related fields

Salary: Up to $3200 (basic) additional transport and shift allowance will be given

Duration: Immediate for 1 year

Location: Tuas (islandwide pickup)

Shift Pattern: 2-2-3 (8am-8pm/8pm-8am)

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Job Description

• Oversee project execution during design, construction and testing and commission works for water and wastewater treatment works or process plant engineering and construction works.
• Lead the technical presentation to Client and Consultant
• Coordinate with Client, Consultant, Client Site Technical Representative(s), Subcontractors and Suppliers during project execution.
• Process Mechanical Work Design in water and wastewater treatment plants and pumping station and pipeline.
• Prepare and submit Process Mechanical Technical particular to Consultant/Client and following up on technical submission till its approval/acceptance by Consultant/Client.
• Control and monitor process mechanical work progress with Sub Contractors and suppliers on the mechanical technical documentation and physical work deliverables.
• Assist PM on progressive monthly claim and payment response matters with Sub Contractors and Suppliers.
• Coordinate with Project QS/PM for establishing of contractual scope of mechanical works and its technical requirements and participating in calling of quotation and assists Procurement Team during awarding of Sub Contract/Supply Contract.
• Prepare O&M Manual and As Built drawings for handing over to client.
• Support PM for project schedule or manpower arrangements.

Requirements

• Degree in Mechanical/Chemical/Environmental Engineering。
• Experienced Mechanical Engineer with qualifications recognized by the PEB Singapore.
• At least 15 years of relevant experience in plant construction fields and preferably in Water and Wastewater Industries in Singapore or in Southeast Asia Region.
• Have experience in water and sewerage pumping station including pipe laying works.
• Good knowledge of Design/Coordination and the Code of Practices and its requirements such as American Standard, British Standard and Singapore Standards.
• Good knowledge of relevant software: Microsoft Office (Word and Excel). Knowledge of CAD, BIM, and Project Scheduling will be an added advantage.