The key functions of Process Engineer is to:

1. Applies Engineering principles and techniques to optimise production process in the fab to meet department and organization goals and objectives

2. Analyse and troubleshoots process engineering, manufacturing, and maintenance issues, and recommend engineering solutions or developed work instructions for out of control processes

3. Leads production and manufacturing systems, improvement projects and develop operation plans in accordance with department and organization objectives alighn with regulatory requirements.

Tasks:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN. Provide guidance to junior Engineers.
• Setup and troubleshoot issues in recipes/ job files in all metrology tools within the Module.
• Analyze data from passed down to identify chronic process issues, establish improvement programs and lead engineers to resolve them. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Work as a team with both Equipment and Manufacturing Engineers to meet Module objectives. Drive team to meet key indices of Uptime and OEE as per the goals set for these indices.
• Take on leadership roles to drive a small cross functional task team to address yield improvement/ excursion issues.
• Facilitate/ initiate CIP programs to optimize process window, cost, yield, and productivity. Establish plans and strategies to optimize process capability to meet operational requirements.
• Resolve complex technical issues in own Module or yield related issues
• Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications / documentation to meet TS16949 Quality Standard requirements.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics / Material Sciences / Mechanical
• Min 5 years of relevant work experience in Thin Film CMP Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a Process Project Engineer to join us on a permanent role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities:

• Perform activities such FAT/SAT and Installation verification for new equipment and modification of existing equipment.
• Review of Vendor Turnover Packages and Construction Trade Turnover Packages.
• Review Functional specifications
• Assist with execution of qualification protocols for IQ, OQ.
• Draft and execute commissioning protocols related to production equipment in upstream/downstream processes
• Support Change Control and deviation management processes
• Coordinates with other departments for efficient completion of projects.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Nelson Anthony([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

About our client: Our client is a leading global pharmaceutical manufacturing company.

*This role will be hired on a 1 year contract to support our client's project, with possible extension / renewal*

About the role:

• Demonstrate the ability to lead technical projects from concept through implementation in collaboration with the Process Engineering team.
• Perform activities such as incoming goods inspection (IGI), FAT/SAT, and installation verification for new equipment and modifications to existing equipment.
• Assist with the execution of qualification protocols for IQ and OQ.
• Support all phases of engineering project implementation to ensure alignment with scope, schedule, budget, quality, and safety requirements.
• Be capable of reading and understanding PCS7 Functional Specifications, ensuring they are fit-for-purpose and aligned with business needs.
• Coordinate with the Automation team, as well as with manufacturing and MSAT teams, for improvements or implementing changes related to software FAT.
• Collaborate with engineering consultant firms and process engineers to support and complete tasks within the schedule for new and modified equipment, including:
  o Reviewing P&IDs, standard detail drawings, URS, etc.
  o Involving in Factory Acceptance Testing (FAT) of all process equipment, when applicable.
  o Coordinating inspection site installation of new equipment upon delivery.
  o Reviewing Vendor Turnover Packages and Construction Trade Turnover Packages.
  o Reviewing functional specifications.
  o Participating in Software FAT using PCS7, if applicable.
  o Assisting in commissioning and qualification of new or modified equipment in Cell Culture or Downstream (Purification) areas, including reviewing and executing C&Q documents.
• Target delivery of results on the first attempt.
• Adhere to applicable Environmental, Health, and Safety (EHS) requirements.
• Commit to maintaining fair and respectful relationships with others and behaving according to the company's code of conduct.
• Perform other duties as assigned by process engineering team members or management.

About you:
• 3 to 5+ years of experience in Upstream/Downstream bioprocess operations and demonstrated experience in equipment design within the pharmaceutical/biopharmaceutical industry.
• Experience in an engineering role supporting cGMP operations in a pharmaceutical/biopharmaceutical manufacturing plant is highly desirable.
• Experience in the design and operation of biopharmaceutical manufacturing equipment and facilities.
• Experience in the management and coordination of engineering and construction management consultants, equipment vendors, and contractors.

Key Skills and Competencies:
• Process and equipment knowledge of biological drug substance manufacturing processes; expertise in downstream unit operations is highly preferable.
• Knowledge/experience in change control management and deviation investigation & closure.
• Understanding of equipment commissioning, various stages of qualification, and process activities.
• Thorough knowledge of current Good Manufacturing Practices (cGMP) and Good Engineering Practices (GEP).
• A solid understanding of design principles and standards within biopharmaceutical facilities.
• Strong knowledge of sanitary design aspects of biopharmaceutical manufacturing equipment.
• Ability to communicate effectively, both in writing and orally, at all levels.

*Please note that only shortlisted candidates will be contacted.*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

This position is responsible for effectively leading the collaboration with business units across TE to achieve productivity and gross margin improvement that are aligned with TE strategy. The successful candidate is responsible for developing and executing the AI strategy to integrate and optimize the inhouse and external resources by influences. The person in this position must charter a strong AI related talent network among business units and AMT on transforming innovation practices into robust application processes with scaling up implementations. This role will leverage the leader’s experience in AI, manufacturing, assembly, and general management to build a strong network and increase the competitiveness in AI related advanced assembly, automation, and manufacturing technologies for TE.

This is an extremely hands-on role that provides the candidate with opportunity to join a high performing organization and highly visible development opportunities for future operation and manufacturing leadership within TE. The position will locate in TE Singapore AI Hub campus and will serve customers from multiple business units and manufacturing sites globally.

Key Responsibilities:

• Identify AI opportunities with multiple BU customers to facilitate their strategy of accelerating the short-term and long-term AI related roadmap on assembly and automation manufacturing.
• Develop and innovate AI related strategies for the transformational collaboration with BU customer to drive TE operational excellence through end-to-end approach from effective innovation, application, and scaling up implementation. Align the strategy with BU customer’s current to 5-year strategic roadmaps and make recommendation on the AMT prioritizations.
• Provide critical thinking and influence by contributing with AI related platforming and implementation of innovative solutions addressing the most challenge assembly and automation processes.
• Oversee and provide directions to AMT global AI projects with support to make sure they are meeting customer requirement on time, on performance, and on budget.
• Partner with the other AMT leaders to develop AI related strategic partnership with suppliers to meet global business needs, and to drive the supplier improvement plans with quality, delivery, and cost requirement.
• Partner with the AMT leaders, BU operation leaders and central operation functions to develop AI talents inside the organization, building AI automation and assembly talents competency for the company for sustainable growth.
• Drive continuous improvement culture change through collaboration and communication regarding AI related best practices knowledge sharing, internal and external benchmarking, talent development, and hands-on leadership.
• Promote a culture that reflects company’s values, encourages outstanding performance, and promotes positive work environment, encouraging inclusion and diversity to develop, coach, and mentor individuals in the team to fully unleash their potentials.
• Evaluate training needs and develop training and development plans to support high-performance teams.

Key Requirements:

• A Master degree in an Engineering or Technical discipline. A PhD engineering degree is strongly preferred. 5+ years operational and/or technical experiences in a technology environment/industry is also preferred.
• A strong talent with clearly demonstrated AI experience and a track record of AI innovating as well as AI deploying/scaling up new technologies via influence in matrix organizations. Understanding key SPAM process in TE is preferred. Experiences in chartering company-wide AI technology events with solid tangible results are strongly preferred.
• Capacity to make balanced decisions in best interest of the business and company with respect to people, investments, and total cost of ownership.
• Record of proven results in driving organization integration and innovating process for benchmarking and sharing best practices.
• Proven records of collaborating with multiple manufacturing/engineering teams and BU customers to develop strategy and execute AI and related projects with multi-years roadmap for productivity and growth margin improvement.
• Experienced in matrix management with a track record of being able to manage by influence and coordinate cross business unit activities.
• Demonstrated track record of taking initiatives, working in a fast-paced environment, and handling multiple priorities simultaneously.
• Passionate, resilient leader with experience leading change.
• Strong business acumen and customer orientation.
• Working knowledge of AI, P&L, cost saving strategies, and budget balances.
• Excellent communication and coaching skills at all levels from the shop floor to top management.
• Willingness to travel frequently, and as necessary, to support a global technology deployment in all regions.
• Strong global industrial experiences with time spent working and living abroad is desired.

Personal characteristics of the individual:

• High-powered individual with a persuasive leadership style and motivating management skills.
• Experienced transformational growth leader with a passion for AI automation and an inventive curiosity.
• High level of initiative and drive with a strong sense of urgency and accountability. Energetic, proactive, and hardworking to lead by example.
• Strong communications skills. Must demonstrates an open, honest, and transparent communication style with excellent interpersonal skills. Ability to explain complex topics concisely to a non-technical audience.
• Excellent judgment and experiences in an environment which requires emotional maturity, politically savvy, and the personal ability to interact with all types of personnel at various levels.
• Keen business judgment demands excellence and sets high standards for self and others. High-level of intellectual curiosity combined with strong problem-solving and analytical skills.
• Willingness and personal style to be a team player and foster a team environment, with the capacity and aptitude to serve as a leader in motivating and inspiring others.
• Impeccable ethics and integrity.

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

Responsibilities

• Collaborate closely with engineers to support Dry Etch process development.
• Analyze test data and set parameters for material and process specifications.
• Lead and coordinate reviews with engineering/scientific teams to ensure processing techniques align with design requirements.
• Innovate and implement new or enhanced process formulations, defining equipment needs and assessing production methods for effectiveness.
• Plan and lead projects focused on introducing new concepts, advanced automation technologies, and improved process strategies.
• Partner with cross-functional engineering teams to identify and resolve integration and process issues.

Requirements:

• Bachelor’s degree in Chemical Engineering, Materials Science Engineering, or a related field.
• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication abilities with good interpersonal interactions.
• Detail-oriented, organized, and a resourceful team contributor.
• Self-driven and capable of working with minimal supervision.
• Project management skills are highly advantageous.
• Comfortable working in a cleanroom environment.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QVRX6Y98

About our client: Our client is a leading international chemical manufacturing company.

About the role: The Production Engineer is responsible for improving the production technology of the upcoming plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures, and operation condition sheets in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, troubleshooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utility consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grades, new processes and equipment with the Production Technology Engineer.
• With a feasibility study, optimize plant operating efficiency, yield optimization, and energy conservation. Then, conduct the necessary field tests to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measures for customer complaints in a technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ findings and recommend modification, improvement, and potential investment projects such as debottlenecking, and environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with the technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked-up P&IDs and the required technical information for cost estimation purposes.
• Coordinate with the Technical department all plant improvement and modification activities working closely with the Technical Process engineer to prepare detailed
• engineering design, preparing specifications and requisitions for major equipment purchases, reviewing vendors’ documents, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with the Technical department for regular updates of P&ID’s, and instrument list, and equipment list.
• Communicate with the global process improvement team to build synergy for further technical updates of new plant.

About you:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.
• Demonstrated skill to in leadership, developing others, and working in a team-based environment.
• Outstanding verbal and written communication, presentation, interpersonal, creative thinking, consulting, and analytical skills.
• Excellent communication skills
• Ability to prioritize work to manage multiple projects to meet deadlines.
• Excellent problem-solving/decision-making skills.
• Ability to multi-task

Preferred qualifications:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction processes, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programing and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

*Please note that only shortlisted candidates will be contacted

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

[Order Number:671284]

Responsibilities

• Support customers' engineers in developing Dry Etch processes.
• Create or refine process formulations, determine equipment requirements, and review techniques used in manufacturing and evaluation.
• Collaborate with engineering and scientific teams to align process designs with technical requirements.
• Analyze test data to establish specifications and acceptable limits for materials and processes.
• Define and manage projects involving new concepts, automation technologies, and process improvements.
• Work closely with cross-functional teams to resolve process and integration challenges.

Requirements

• Minimum of 2 years of hands-on experience in Dry Etch process development.
• Strong communication and interpersonal skills.
• Detail-oriented, organized, and resourceful team player.
• Self-motivated and capable of working independently with minimal supervision.
• Comfortable working in a cleanroom environment.
• Experience in project management is a plus.

We regret that only shortlisted candidates will be notified.

However, rest assured that all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Liew Lee Hui

EA Personnel Registration Number: R22109864

EA License no.: 07C5771

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

• You are responsible to drive and manage the silicon Bump & package assembly suppliers, backend processes and solutions to achieve the aggressive TQRDCEB goals.
• You will work closely with package design & technology, test & product engg, production planning, quality engg & NPI teams, assembly/substrate suppliers to support new product & technology introduction activities by defining processes, monitoring systems, manage process improvements and changes.
• Provide day-to-day support to bump and assembly suppliers & internal planning, product and test engineering teams.
• Plan, drive & implement improvement activities for continual improvement, 2nd sourcing, cost reduction & customer satisfaction.

Qualifications:

• PhD / Master / Degree in Mechanical / Electrical / Electronics Engineering with 7~12 years of relevant experience of managing advanced node silicon bumping, large body single & multi-chip (2.1/2.5/3D) package assembly, substrate & back-end suppliers and processes.
• Hands on experience in Product Life-Cycle Management - creating & maintaining Bill of Material structure, Process Documentation, Process Change Notification etc.
• Good team player, result oriented individual, experienced in project management, failure analysis tools, techniques and TQM. Good analytical, problem-solving skills. Flexible and agile.
• Sound knowledge of applicable industry standards, quality systems, regulations, knowledge of prevailing and emerging silicon package & substrate technologies, bumping and assembly processes, materials and equipment.
• Able to communicate with internal team members & external partners in various geographic locations and may required to travel from time to time at short notice.
• Experienced AutoCAD user. Knowledge of silicon & PCB fabrication, board assembly processes, are an added advantage

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

General Description

• Responsible as Operation’s facility engineer for the development of Terminal’s new LNG Trucking facility. Incumbent shall support the Project team, ensure the Operability & Maintainability aspects of the new facility are taken care during engineering, design and construction phases. Incumbent shall also develop and execute “Ready to Operate” plans for the facility;
• Incumbent shall work closely as a team with Production Shift Teams, Maintenance Team and other Process Engineers providing process engineering expertise ensuring the Terminal and Trucking facilities operates safely, reliably and efficiently;
• Incumbent shall liaise closely with Commercial team to ensure the Terminal delivers the required services, inclusive of Jetty Operations, Gas supply and Trucking are incompliance to regulations, procedures and contractual agreements

Roles & Responsibilities

The incumbent roles include but not limited to following scope of tasks and duties:

• Evaluate operations activities, make recommendations and execute continuous process improvements in the areas of operational excellence;
• Recruit, train and supervise the Trucking Technicians assigned for operating the Trucking Facility.
• Lead troubleshooting, inspections, reviews and investigations of equipment or process system to support optimisation, drive root cause analysis and formulate remedial resolution. Incumbent shall also investigate Customer’s complaints related to equipment and process systems;
• Review the adequacy of standard operating procedures(SOP) to ensure safe and reliable operations with operational design limitations, includes commissioning, operations and maintenance phases of facilities;
• Provide specific instructions to Production Shift Teams, Maintenance Team, Trucking Team and Laboratory on LNG transfer operations, trucking, stowage plans and samplings requirements;
• Liaise with stakeholders in ensuring LNG surveyor’s reports, certificates of quality are accurate and consistent as per the procedures;
• Diligently review maintenance plans, method statements and risk assessment on the process safety aspects for the maintenance work related to the assigned equipment and systems;
• Compile data and measure Terminal’s performance including service availability and efficiency;
• Undertake alarm management for assigned area and proactively drive alarms analysis to ensure robust operations;
• Take lead role for Management of Change(MOC) for facilities modification, as required;
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, 3D models, Safety Integrity Level, RAM analysis, design layout and process safety requirement in alignment with regulatory and business objectives;
• Report HSSE near miss/violation. Take an active role in HSSE activities and green initiatives;
• Assigned specific role and responsibility in emergency response;

Work Experience

• Minimum of eight (8) years work experience in process engineering function in an oil, gas and petrochemical facilities, complex utility, cryogenic or trucking facilities;
• Conversant with local/international codes, regulations, standards, best practices, equipment inspection and schedule requirements;
• Knowledge of installation, commissioning, start-up, maintenance and troubleshooting of processes system in oil, gas or petrochemical industry;
• Knowledge of Process Safety Management, Electrical, Instrumentation, Controls or Mechanical systems;
• Experience in Process Simulation (e.g. Hysys/Unisim or equivalent), Design Softwares(e.g. Fisher Specification Manager, Hydraulics, PSV sizing) or other related process software an advantage;
• Experience in Engineering design analysis including preliminary design development, heat and mass balance calculation, technology evaluation and equipment selection preferred;
• Experience in dealing with consultants and contractors involved in the Oil & Gas sector, including external agencies, utilities and government organizations;
• Basic knowledge of ship-shore interface and cryogenic transfer operations an advantage;
• Capable of lead and guide technicians ensuring the works are executed safely and effectively;

Education

• Incumbent must possess a Degree in Chemical Engineering from a recognised university.
• Process Engineering background with Mechanical and Instruments knowledge.

Responsibilities:

• Design, develop, and maintain software applications using C#.
• Develop and implement automated test equipment and process systems.
• Write clean, scalable, and efficient code.
• Troubleshoot, debug, and upgrade existing software.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Participate in code reviews to maintain code quality and share knowledge.
• Ensure software meets all requirements of quality, security, modifiability, extensibility, etc.
• Document development processes, code changes, and other relevant information.
• Support internal and external BUYOFF, ensuring completion of Factory and Site Acceptance with customers and the project team.
• Quickly resolve issues by working with the project and production teams.

Requirements:

• Bachelor’s degree in Engineering, Computer Science, or a related field.
• Proven experience as a software Development Engineer or similar role.
• Strong proficiency in C# programming.
• Experience with test equipment and automation process systems.
• Knowledge of electrical and electronics hardware.
• Familiarity with test instrumentation and motion systems.
• Basic understanding of vision systems.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.
• Knowledge of hardware interfacing and control systems.
• Experience with CI/CD pipelines and automated testing frameworks.

Duties to Be Performed:

We are looking for a Project Manager – Process Systems Specialist in the either or all of the following systems,

- Gas / Environmental / Ultra Pure Water / Chemical Systems.

The prospective candidate will be responsible for the following,

- Responsible for Concept and Detailed Design for Process Facility systems for the entire course of the project (Conceptual Design, Detailed Engineering calculations, System & Component sizing, Budgeting, Drawing development coordination from Engineering up to Construction stage e.g. PIDs / layouts / sections).

- Capable in interdisciplinary understanding and managing of relevant interfaces.

- Detailed understanding of all technical standards, drawing formats and symbols.

- Tendering process (e.g. Technical and Commercial bid evaluation).

- Time and schedule management.

- Check and review engineering document and drawings for accuracy and completeness for submission and shop fabrication (e.g. Submittal Procedure).

- Lead system design and reviews with customers and ensure customer sign off and approval.

- Review of all the bench mark data, scope and design change and contract variation aspects.

- Ensure Project Director/ Manager is kept aware of the process engineering design and construction progress and any cost and schedule impacts.

- Coordinate installations with sub-contractors on site.

- Support CSA & M&E team for the design including CAD team and project effectively & efficiently.

- Involved in the Commissioning of Systems and develop the documentation with the sub-contractors.

- Consolidate and upkeep of in-house engineering Standards.

- Able to work independently.

- Able to travel/ relocate.

Process Technician

Our client is a leading global manufacturer of polymer. They are currently seeking for Process Technicians to operate and monitor their manufacturing process.

The role of the Process Technician includes:

• Operate the process to meet the conditions specified in manuals/instructions
• Operate the process equipment at site in accordance with operation plan.
• Take measures to improve production status and equipment performance on productivity and quality after approval of shift senior technician
• Patrol plant process, confirm the condition of process and equipment and report disordered matter to senior shift technicians.
• Prepare and organised patrol records.
• Take a sampling for analysis of products and process evaluation.
• Report all incidents, near misses, deviation from plan and take part in further investigation when required.
• Assist in coordination of daily maintenance planning and participate in maintenance activities and shutdown/start-up of sections.
• Provide support for maintenance group /quality control group if any problem arises.

Job Requirement:

• Diploma or NITEC in Chemical engineering or equivalent.
• Minimum 3 years experience in chemical plant. The experience in polymerization unit and extrusion unit or a minimum 3 years experience in manufacturing plant such compounding or extrusion is advantageous.
• Possess basic knowledge of maintenance, chemical engineering and analytical procedures.
• Experience in operation via DCS systems is advantageous
• An effective team player with good communication
• Able to work in a fast-paced environment.

Other information:

• Company bus provided
• Fixed allowances including transport allowance, site allowance etc

Interested candidates, please send your detailed resume stating Past Employments, including Reasons of Leaving, Last Drawn Salary for the most recent 2 positions (breakdown of basic salary, allowance, bonuses etc), Expected Basic Salary and availability.

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)
Posting Personnel: Win Hui
EA Personnel Reg No.: R23115634

Kindly send in your latest job resume without your NRIC numbers and other ID numbers.

For job resume(s) that contain NRIC numbers and/ or ID details, it may not be processed and your job application may be rejected due to unacceptable submission of job application details. Please refer to the advisory guidelines on the PDPA for NRIC numbers and other ID numbers.

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

1. Packing of finished product into paper bags weighing 20kg to 25kg
2. Stacking of finished product packed in paper bags onto wooden pallets
3. General housekeeping of work area
4. Ad hoc duties as assisgned by supervisor
5. Candidate will be trained to run production of chemial processes when more experienced
6. Protective gear must be worn during work (E.g. safety helmet, mask, ear plugs, gloves, safety boots)

Domain: Electronics (not mandatory)

Location: North, Singapore

Resource needs to assist Director/Manager in preparing MS Excel presentations, to do interactions with different departments

* Experience in Advanced Excel tool

* Good experience in reports preparation and presentation to seniors

* Good to have PowerBI, Tableau User Level experience

* Good communication skills

* Need to report to Senior Manager/Director

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Technician to be part of our Process Integration (YDD) diverse team of talent.

What you will be working on:

• To perform inline inspection and recipe setup for brightfield and darkfield inspection tools.
• To perform Optical / SEM reviews and defect classification for OOC lots
• To generate Defect Notice for OOC lots and inform respective departments
• To manage the WIP and response to request from other departments
• To assist YDD Engineer on analysis and assessment
• To perform reticle printdown inspections and check for repeater defects.

More about you:

• 3-5 years’ relevant fab experience
• Ability to multi-task and work under stress
• Willing to work on shift (Day/ Night)

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description

• Lead the process and mechanical team for process plant EPC project, including design, engineering, supporting procurement & installation, and testing & commissioning works
• Review tender specifications and meticulously evaluate vendor proposals for process mechanical equipment, propose suitable equipment brands for tender submission and procurement, prepare cost estimations for process mechanical work during the tender stage.
• Provide support during the procurement, contract negotiation, and progress claim processes throughout project execution.
• Lead testing and commissioning activities, ensuring the seamless transition to operational status.
• Plan and manage the process mechanical work schedule, and keep the Management Team informed of project progress, emerging issues, and resource requirements.
• Deliver technical presentations to clients and consultants, responding to their inquiries and comments in a professional manner.
• Manage the process mechanical suppliers and subcontractors according to establish schedule and quality requirement.

Requirements

• Minimum bachelor degree in Chemical/Environmental/Mechanical Engineering or Equivalent.
• Minimum 8 years’ proven experience in process/mechanical design of process plant (incineration plant, water/wastewater plant, etc.), at least 2 years’ experience in leadership or team lead role. Experience in the Flue Gas Desulphurization (FGD) wastewater treatment system is an advantage.
• In-depth knowledge of relevant industry standards and Singapore codes of practice.
• Exceptional problem-solving and troubleshooting skills, with a track record of resolving complex technical issues.
• Proficiency in using commonly used software applications such as MS Office.
• Familiarity with Naviswork and Bentley View Software for P&ID is considered an added advantage.
• Strong leadership abilities, including the capability to lead a team effectively.
• Excellent interpersonal and communication skills to facilitate technical discussions and collaborate effectively with individuals at all levels within the organization.

Company Summary:
Since 2002, DVI Solutions has been a leading provider of audio-visual setups to help our clients communicate and collaborate better--whether it's with colleagues across the office, or partners on the other side of the world. We have presence across Singapore, Thailand, Shanghai, Hong Kong, Philippines, Vietnam, India, Malaysia and Indonesia. Our satisfied clients include corporations, government agencies, schools, retail stores, hotels and many more.

Position Summary:
This role will drive business operations and strategies, including establishing scope and performing detailed business impact analysis in support of management decisions. Additionally, you'll define roles and responsibilities, establish and document requirements, escalate and ensure issues/decisions are resolved, create and manage implementation plans, and lead/participate in meetings at the operational and project level.

Responsibilities:

• Handle business operations from project management to business process analysis, reports generation, financial reports analysis and more
• Business/project analysis, including documenting business requirements, detailing issues and risks, and drafting business processes and data flows
• Data analysis, including data collection, synthesis, and translation of results into concrete actionable solutions
• Identify gaps between applicable requirements and current procedures/controls and participate in driving resolution of business
• Work with business partners to design and implement enhancements to existing processes and/or business applications, introduce new processes and/or toolsets.
• With guidance, develop and implement solutions that strengthen business operating models, enhance the client experience, and improve efficiency and controls
• Define user acceptance test plans and test cases, coordinate and execute user acceptance testing and interpret, assess, and communicate results to enable signoff on deliverables
• Provide implementation support, inclusive of process change management, and ensure those implementations meet company’s requirements

Required Experience:

• Open to fresh graduate from business, finance or related field.
• Excellent communication and presentations skills across various stakeholders and senior management
• Excellent analytical and logical thinking to understand and analyse complex business processes
• Ability to analyse and resolve project-related issues and follow through with set objectives
• Ability to deal with different stakeholder groups to elicit business requirements, procedures, and processes
• Open to occasional regional travel

DVI Solutions is an Equal Opportunity Employer. Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status.

What's We Offer?

Salary: Basic $1,800 - $2,800 + Fixed Allowances of $800 + Night Shift Allowance
Location: Jurong Island (Company Transport Provided at Designated Points)
Benefits:

• Permanent Role
• AWS + Variable Bonus
• Career Development Opportunities

Who Can Apply:

• NITEC or Diploma holders in Chemical or Chemistry-related fields.
• Willing to perform 12 hours shift

Key Responsibilities:

• Operate the plant and site services safely and efficiently following instructions.
• Suggest and implement safety and efficiency improvements.
• Communicate effectively with team members and other site functions.
• Perform routine maintenance and prepare equipment for service.
• Conduct analytical testing as required.
• Uphold safety standards and respond to emergencies when necessary.
• Train and coach new recruits.

Interested? Apply now to join the dynamic and vibrant team!

Kindly note: Only shortlisted candidates will be notified.

Triton AI Pte Ltd
Registration Number: R1983718
EA: 21C0661

In this role, you will take a leading role in Salesforce implementation to the business, including coordinating rollout of successive releases and driving adoption.

Job Responsibilities

• Act as the functional expert of the company and work closely with local business to understand business requirements and provide solutions for consideration.
• Facilitate discussions and workshops, asking probing questions, encouraging open communication and building cooperation amongst the business teams.
• Focus on recommending process innovation and efficiencies through current state process analysis, user experience, observations, industry trends, standard methodologies (Design Thinking, Agile), leading edge technology and process improvement ideas to challenge status quo and deliver extraordinary customer-focused solutions.
• Understand and document regional nuances of both current and future state processes.
• Act as key point of contact with global stakeholders in charge of Salesforce program coordination and execution.
• Contribute to defining regional roadmap for Salesforce program rollout.
• Support data readiness in preparation for system rollout, including preparation of data to be migrated in the new system.
• Execute user acceptance testing (UAT) and ensure system readiness to meet local requirements.
• Support change management and training needs for future state processes.
• Provide advice on Salesforce best practices.

Skills required

• Bachelor Degree in Computer Science, Business Analytics or discipline related to the role, with at least 8 years of relevant experience.
• Understanding of Salesforce Platform functionality and best practices.
• Experience in an industry selling goods business-to-business.
• Excellent analytical and problem-solving skills, outstanding attention to detail.
• Experience in drafting business requirements to serve the needs of the organization.
• Proven ability to work independently, exercising judgement and initiative.
• Excellent time management and prioritization skills.
• Ability to influence others and move toward a common vision or goal.
• Exceptional written and verbal communication, and presentation skills, to audiences of varying seniority.
• Capacity to extract, collate and present information in a cohesive and meaningful manner.
• Self-motivated individual, who thrives working in a global, matrixed, fast-paced environment.
• Working knowledge of process documentation (Miro, Omnigraffle, Visio, etc.) & project management software (Wrike, etc.).

Purpose of the Job :

• Plan and direct all aspects of engineering activities

• Drive team for continuous improvement in cost, yield and quality

• Responsible for setting up department KPIs

Job

• Understand customer requirements and meet/exceed customer goals

• Drive team to set up stable manufacturing processes with CpK >1.67

• Drive engineering discipline (use DOEs and Statistical Process Engineering tools) in cost, yield and quality improvement

• Arrange training for Process Managers and Engineers.

• Deploy FDC and SPC on key equipment

• Partnership with cross functional teams to meet production schedules, quality and safety

• Customer engineering and issues resolution

Requirement:

• Degree in Electrical/Electronics/Mechanical/Chemical Engineering/Chemistry or its equivalent with minimum of 15 years engineering experience in wafer fab or wafer bumping house, with at least 5 years management experience as a Director/Deputy Director level in a fast moving environment

• Thorough knowledge of wafer level packaging, engineering and production

• Have experience in setting up FDC and SPC

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Please email your resume in a detailed MS Word format to [email protected] stating

Expecting Salary

Date Available

Reason to Leave each job:

We regret that only shortlisted candidates will be notified

Joyce Koh Ai Leng

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building, Singapore 049705

Tel: 6950 9737

www.peopleprofilers.com

EA License Number: 02C4944

EA Personnel Reg nos R1110618

Job ID: L95W6R86

· Responsible for assigned functional area of the Enterprise Resource Planning (ERP) application

· Participate in developing internal processes for application management

· Manage support process for assigned functional area of the ERP application

o Provide user support

o Manage issue logs

o Work with vendors to ensure that deliveries are done in a timely manner and to expected quality

o Test vendor deliveries and internal deliveries

· Lead or participate in implementation efforts

o Provide solutions for requested application changes

o Ensure that initiated application changes are well coordinated and planned before implementation

o Develop documentation to describe application changes, application processes and application functions

· Provide application training to super users, other Application Process Managers (APMs) and other applicable roles

· Ensure optimization and alignment of application processes and application use

o Promote correct, consistent and optimal use of application and basic data

o Initiate changes to improve application use, with the objective to improve processes, data quality and routines

o Follow up to ensure application processes are aligned across locations and companies

· Keep up to date with new features and functions within the ERP solution and closely related applications

· Ensure a good understanding of the overall ERP solution and how it interacts with/impacts the assigned functional area(s) and other areas of the business

Responsibilities:

• Assist in the design, operation, control and optimization of chemical / biological processes systems used in manufacture of API and biologic products.
• To be part of the commissioning and qualification effort of the process equipment and associated systems.
• Assist in Design, install and commission new production units, monitoring modifications and upgrades and troubleshooting existing processes
• Participate in improvement efforts leading to higher process capability and production volume while maintaining and improving quality standards
• In a cGMP environment, lead modifications and changes to processes and equipment, troubleshooting, deviation investigation, identification and completion of corrective and preventative actions.
• Assist Senior Engineer in proposal and evaluation modifications to equipment, processes and operations to improve safety, increase efficiency and enhance company goals.
• Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs and changeovers
• Actively engaged in developing specifications for process equipment and assist in FAT / SAT of related equipment as part of the new build-outs.
• Participate and lead, when required, in all investigations (contaminations, deviations, and discrepancies) relating to the manufacturing process.
• Provide operational support for the successful and uninterrupted operation of manufacturing.
• Other duties as assigned by manager

Requirements:

• Diploma/Degree in Science, Mechanical/Chemical Engineering or a relevant discipline. At least 1-2 years related Pharmaceutical experience preferred. Fresh graduates or with pharmaceutical internship are also welcome to apply.
• Good interpersonal and communication skills.
• Ability to multitask and hands-on approach
• Reliability, responsibility, and personal integrity
• Self-motivated and willingness to learn
• Creative Thinking