• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

• Perform end user IT Support
• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

Responsibilities:

• Plan and implement the work based on company policy and ensure on schedule.
• Support and maintain the MS Windows servers, SAN Storages and CISCO network infrastructure of the whole company.
• To review the current IT infrastructure and propose improvement plans.
• To maintain and improve backup of the systems.

Requirements:

• Bachelor’s degree in IT related field or Diploma with at least 4 years of related working experience
• Good knowledge in configuration of networking and IP telephony system.
• Good hands-on knowledge of Microsoft Server system
• Strong analytical and troubleshooting skills
• Candidate with MCSE, CCNA certification is preferred
• Project management knowledge (good to have)
• Experience in manufacturing field will be an added advantage.

To apply, please visit www.gmprecruit.com and search for Job Reference: 24717

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

We are seeking a highly skilled Senior Cloud/ DevOps Engineer to contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package.

Responsibilities:

• Design, implement, and maintain CI/CD pipelines to automate software build, test, and deployment processes.
• Implement monitoring solutions and manage monitoring and alerting tools.
• Maintain configuration management, build, continuous integration, and deployment tools.
• Source code management and collaborate with development teams on branching strategies and versioning.
• Streamline operational tasks, monitoring, and infrastructure provisioning.
• Design and implement production infrastructure architecture based on application requirements, ensuring scalability, availability, and security.
• Integrate security best practices into the software development lifecycle and ensure compliance with relevant standards and regulations.
• Prioritize and execute tasks in a high-pressure, fast-paced environment.

Job Requirements:

• Bachelor’s Degree in IT, Computer Science, or related fields.
• Minimum of 5 years of relevant DevOps experience.
• Knowledge and experience in configuring automated build, test, and deploy pipelines to streamline the software delivery process.
• Experience in containerization technologies such as Docker and Kubernetes.
• Experience in configuration management systems (Terraform, Packer, Ansible).
• Experience in AWS (Related certification will be advantageous).
• Prior experience in Linux server administration, and shell scripting.
• Working experience in Agile environments or projects (Scrum/Kanban).

Interested candidates may apply via email to [email protected] (indicating Job ID J44445 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – Outsourcing Team
ScienTec Consulting Pte Ltd – 11C5781

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductir/LCD/Electronics/Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Overview / Responsibilities

The Facilities Cost Benchmark is responsible for developing a comprehensive construction cost and management to achieve long-term Micron goals.

The role will be managing and supporting Micron construction projects cost from planning through closeout, including scoping, pre-planning, design, construction administration, Facilities budget cost benchmark management with different Micron site.

Responsibility includes budget cost managing & improving of new project planning business process. Gathering, analyzing & benchmarking Micron current manufacturing sites & construction projects, providing accurate & timely information to project evaluation team. Facilities Cost Benchmark also has another important responsibility is to evaluate the global semiconductor factory construction cost comparison.

Responsibilities

• Manage and lead new construction project cost process.
• Establishing project objectives, scope and deliverables in collaboration with stakeholders and ensuring alignment with requirements.
• Prepare new project Cost & schedule report & long-term plan reports for management review.
• Developing and managing initial project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Maintain effective communication with project team members and relative stakeholders to provide project updates, address concerns and foster strong working relationships.
• Ensure Roles, Responsibilities and Accountabilities are fully understood by the participated teams
• Collect, classify, evaluate data and information used in supporting the new Micron construction project planning evaluation request.
• To evaluate the global semiconductor factory construction cost comparison.

Skills / Qualifications

Minimum Qualifications:

• The candidate should possess a BSc or Beng in Engineering from a recognized institute of higher learning.
• Experience in Master planning & project planning is thus highly valued.
• Candidates with experience in facilities operation & construction.
• Minimum 5 years of budget and cost management experience.
• Good analytical skills with problem solving aptitude.
• Skills in excel and simple code writing desired.
• Ability to integrate and work in a global multicultural team
• Great leadership, interpersonal skills and team building spirit.
• Excellent communication skills, both written and verbal.

Minimum Experience & Skills:

• Candidates with experience in Fab or facilities construction and operations.
• Demonstrable experience in the construction or semiconductor project cost management and/or other relevant industries is strongly preferred.
• Strong financial understanding and experience in project budgeting and cost control.
• Strong communication skills, as well as the ability to visualize issues and communicate them to others.
• Outstanding organization, coordination and leadership skills – ability to coordinate and motivate TMs from multiple sites and different background.
• Ability to work collaboratively and pro-actively in a team environment.
• Moderate skill in excel and simple code writing desired.
• Effective delegation skills.
• Experience in managing large-scale construction projects.
• Language: Chinese, English. Japanese would be preferred.

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Your Team, Your Impact

The role is part of our Test Operations and plays a critical role in supporting Product and Test Engineers with test development, product qualification, and manufacturing release. Additionally, it involves collaboration with production and planning teams to optimize spare capacity for revenue generation. The position encompasses the management of Marvell’s test equipment, including testers, handlers, probers, and related hardware, with an emphasis on ensuring operational readiness and driving continuous improvement.

What You Can Expect

• Collaborate with product & test engineers and external vendors to install, configure, buyoff and operate testers, handlers, change kits, probers and hardware items to support NPI Test development projects.
• Own and drive equipment installations, buyoff & operational readiness.
• Develop procedures and documentation for tools handling, setup, conversions to achieve high up time & low operational cost.
• Guide technicians on schematic interpretations, board level troubleshooting and bench setups.
• Work with vendors for tool maintenance, upgrade, repair & calibration works as necessary.
• Review and maintain key spares to achieve high levels of equipment & HW uptime.
• Generate periodic management updates on equipment installation & asset utilization metrics.

What We're Looking For

• BS in EE/ME with minimum 7 years of experience in handling ATEs, Auto Handlers, Change kits, Wafer Probers and associated hardwares.
• System knowledge with hands-on experience in UltraFLEX & Advantest 93K testers.
• Solid understanding in correlations, calibration, golden unit test, preventive maintenance & production release processes.
• Experience in driving root cause analysis and CA/PA to achieve high equipment uptime & stability.
• Work in rotating shifts (day or night schedules) to support project teams across the globe.
• Self-starter, fast learner, good communicator, able to work in matrix organization, juggle multiple tasks.
• Knowledge in ESD controls, GRR, 5S, TPM, OEE, 8D, ISO-9K, MS-Office tools.
• Hands on experience in setup, troubleshoot & running of Hon Precision, Epson and Cohu handlers preferred.

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Singapore Based (Woodlands Industrial Park / Site Office)

5.5 Days work per week (Mon to Fri 8:30am to 5:30pm & Sat 8:30sm to 12:30pm)

Salary: $3,000 to $6,000 depending on experience

Candidate must possess at least a Diploma, Advanced/ Higher/ Graduate Diploma or Degree in Mechanical, Electrical Engineering + Experience in chiller system

Career Progression Opportunities

Responsibilities & Duties

Knowledge of M&E project requirements and contract requirements

Able to manage projects/ claims/ sub-contracts

To able to work odd hours (if necessary)

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

• Central-North location
• 5 days work week
• $7,500 - $13,000 + Variable bonus
• Excellent career progression
• Attractive employee welfare benefit
• Regional projects spanning from Singapore to China, Bhutan, and Cambodia.

Responsibilities:

Reports directly to the Managing Director. You are to serve as Qualified Person and manage a team of engineers to ensure safe Structural/ Geotechnical design and excellent delivery of service to clients.

• Serve as Qualified Person (QP) and responsible for PE endorsement for projects assigned
• Responsible for the profitability and cost efficiency of your team
• Project coordination/management
• Lead projects and attend meetings
• Supervise and inspect construction works.
• Managing and supervising technical/site staff and administrative functions of the projects.
• Provide guidance and manage engineers in the team to ensure on-time and accurate delivery of service.
• Check critical design calculations and specifications of the project prior to approving all C&S related documents and drawings produced in the projects prior to submission to regulatory authorities.
• Able to be hands-on to carry out detailed analysis and design of civil, structural, and geotechnical works
• Able to be hands-on in preparing design calculation reports and structural drawings for authorities' submissions;
• Able to coordinate with various stakeholders such as clients, consultants, and contractors for projects

Requirements:

• Degree in Civil/Structural/Geotechnical Engineering or its equivalent
• Local design experience in C&S/ Geotechnical engineering work & conversant with Singapore Building Codes and Practices
• Familiarity with engineering software (e.g. Tedds, StaadPro, Prota, Etab) and submission procedures to regulatory authorities
• Strong report writing skills to prepare and furnish reports
• Registered with Singapore PE Board as Professional Engineer
• Willing to sign as signing QP

We regret that only shortlisted candidate will be notified.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Job Summary:

We are seeking a talented IT Engineer - MES who will be responsible for the integration of Computer Integrated Manufacturing (CIM) systems and Manufacturing Execution Systems (MES) focusing on improving efficiency and productivity to enhance manufacturing processes.

Mandatory Skill-set:

• Degree in Computer Science, Computer Engineering;
• At least 2 years of experience in supporting Manufacturing Execution System (MES) applications (e.g., Siemens Opcenter, Rockwell FactoryTalk);
• Proficiency in programming languages such as SQL, Python, or C#;
• Working knowledge in Unix scripting;
• Good understanding in application server, client application and database (i.e. Oracle);
• Independent and proactive yet a strong team player;
• Excellent spoken and written communication skills.

Desired Skill-set:

• Experience in Tibco (TIB / RV) in high technology manufacturing environment.

Responsibilities:

• Provide L2 and L3 support for production systems, focusing on monitoring, maintaining, and continuously improving the Manufacturing Execution System (MES);
• Ensure the proper operation of production lines concerning products, routes, operations, equipment, recipes, and lot movements;
• Analyze user requirements to perform MES modeling and configuration for changes in material flow;
• Participate in User Acceptance Testing (UAT) and System Integration Testing (SIT) to validate system performance and functionality;
• Offer both user and system support during pre-implementation and post-implementation phases to ensure a smooth transition and operation;
• Ensure that development tasks are completed on time, adhering to corporate policies and guidelines, with proper documentation;

Situated in the heart of Singapore's Central Business District, Rakuten Asia Pte. Ltd. is Rakuten's Asia Regional headquarters. Established in August 2012 as part of Rakuten's global expansion strategy, Rakuten Asia comprises various businesses that provide essential value-added services to Rakuten's global ecosystem. Through advertisement product development, product strategy, and data management, among others, Rakuten Asia is strengthening Rakuten Group's core competencies to take the lead in an increasingly digitalized world.

Rakuten Group, Inc. is a global leader in internet services that empower individuals, communities, businesses, and society. Founded in Tokyo in 1997 as an online marketplace, Rakuten has expanded to offer services in e-commerce, fintech, digital content, and communications to approximately 1.7 billion members around the world. The Rakuten Group has nearly 32,000 employees and operations in 30 countries and regions. For more information visit https://global.rakuten.com/corp/

Department overview

Search Department focuses on Search, Discovery, and Navigation experience for users of Rakuten. We design, develop, and deploy high performance, fault-tolerant distributed systems used by millions of Rakuten customers every day. We strive to deliver the most innovative solutions that are helpful to people and societies around the world.

Why we hire

We are looking for a backend software engineer to work on next generation AI native experience. In this role, you will be at the forefront of development, and implementation of cutting-edge techniques for LLM solutions including prompt engineering, model fine-tuning, evaluation, and inference capabilities.

Position Details

• Explore and implement the most recent technologies and approaches for AI native user experience and build innovative products on top of LLM platform.
• Work closely with cross-functional teams to implement projects harnessing LLMs for diverse purposes and vertical domains.
• Design and develop a high-performance platform capable of handling and processing large volumes of requests efficiently.

Qualification

• BS degree in Computer Science, Computer Engineering, or other relevant majors with minimum 3-5 years of experience
• Extensive experience in programming, included but not limited to, the following programming languages: Java, Golang and C++
• Excellent problem-analysis and -solving skills, have industry experience in building backend services for large-scale distributed system
• Good team communication and collaboration skills.
• Strong execution skills and have a problem-solving mindset.

Preferred Qualifications

• Maintain a deep passion for contributing to the success of LLM is essential in this innovative and fast-paced team environment.
• Experience in serving Deep Learning models on framework TensorFlow, PyTorch, XGBoost etc.
• Familiar with LLM’s and supporting tools such as LangChain (Optional)

Rakuten is an equal opportunities employer and welcomes applications regardless of sex, marital status, ethnic origin, sexual orientation, religious belief or age.

Responsibilities:

• Lead the site supervision team on all the Civil and Structural and Building Construction works.
• Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.
• Address and respond to all Contractor’s RFI’s and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.
• Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

Qualifications:

• Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.
• Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.
• Registered with IES as Resident Engineer (Civil).
• A person with good communication and leadership skills.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

The Role:

This position involves the preparation of technical specifications, construction drawings, and design documents for instrumentation and control systems in process and industrial plants. The role requires coordinating with multiple teams to ensure project delivery within established schedules and budget constraints.

Key Responsibilities:

• Lead the design efforts for field instrumentation and control systems, including the preparation and review of design documents.
• Manage small to medium-sized projects, ensuring adherence to allocated man-hours, costs, and timelines.
• Draft and review specifications, technical bid evaluations (TBE), and vendor documentation for instrumentation, analyzers, and control systems (DCS, ESD, F&G).
• Develop construction-related drawings, such as IO lists, location layouts, hook-up diagrams, and cable routing plans.
• Select and evaluate appropriate instruments for process control and monitoring applications.
• Estimate billable man-hours (BMBQ) and contribute to technical proposal development for tenders.
• Compile monthly project reports, participate in client meetings, and ensure alignment with project milestones.
• Collaborate with project teams and oversee the daily task assignments for team members.
• Perform factory acceptance testing (FAT), site acceptance testing (SAT), loop checks, and provide support during commissioning.
• Support field activities during construction, pre-commissioning, and commissioning phases.

The Requirements:

• Bachelor’s degree in Chemical Engineering, Electrical Engineering, or Instrument and Control Engineering.
• At least 15 years of experience in instrument and control system design, with a strong foundation in field instrumentation engineering and control systems such as DCS, ESD, and F&G.
• Hands-on experience with construction support, including FAT, SAT, and loop checks.
• Proficiency in the development of construction drawings and project documentation.
• Strong communication skills and ability to work effectively across teams.

Interested applicants are encouraged to submit their detailed resumes.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Our client is a global provider of intelligent automation and integrated security management solutions.

• Assist the project team with documentation, report drafting, and coordinating project tasks.
• Participate in the system design, technical development, and implementation phases.

Requirements:

• ITE in Electrical or equivalent
• Minimum 3 years of experience in Security System Installation.
• Good understanding in computer, network, security, ELV and electrical system.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Perform pre- and post-sales technical support to customers.
• Provide support to the sales staff in technical presentations.
• Evaluate and establish a vision system performance specification.

Requirements:

• Diploma in any Engineering field
• At least 2 years of experience in field servicing and semiconductor industry.
• Able to troubleshoot electronics hardware system, PC hardware, OS and networking.
• Good understanding in Die Sorter or Wafer Sorter

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 3 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

We are seeking a electrical technician to join ourteam in Singapore.

The ideal candidate should

Job responsibilities

- installation of all types of CCTV/ door access ,etc.

- perform service & repair all types of CCTV/door access system.

- perform checking maintenance andtroubleshooting of CCTV/door access.

- Any other duties as assigned by Managerduring project, from time to time.

- perform handover with customer after jobcompleted.

Job requirement

- At least 4 Year(s) of working experience inelectrical work /installation /

- Have ITC/Diploma in Electrical may bepreferred.

- Be mild-tempered

- Be able to work overtime when required.

- Applicant with CSOC/BCSS cert may bepreferred.

- Required language (s): English (written andspoken)

SOLAR PANEL INSTALLATION WORK

Responsibility to take care of the project and lead workers.

High floor sun site work.

Assessing locations to ensure they are suitable for solar panels Measuring up areas for installation Making adjustments to building surfaces so panels fit and are adequately supported Installing and maintaining solar panels on homes, business premises or open land,Solar panel installers are responsible for installing solar panels on roofs, in fields, or other surfaces. They work with a variety of different equipment and materials to ensure that the panels they install are properly connected and functioning correctly. Solar panel installers must have strong technical skills and knowledge of their craft.

Responsibilities:

• Conduct daily preventive & corrective maintenance at remote work site
• Attend emergency site issues and response to site within service level of agreement
• Keep track and prepare service report for preventive & corrective maintenance
• Submit service report on daily basis
• To perform rotating standby duty
• To prepare spare part list and perform stock take of maintenance spares with client
• To liaise with other co-workers / departments and Customer
• Preparation of project submissions, ensure up-to-date documents and final submission of project documentation
• To responsibilities include project planning, co-ordinate, implement and manage security & communications related systems projects

Requirement:

• Diploma/Degree in Electrical & Electronics or IT discipline.
• At least 1 years hands-on experience in maintenance work in CCTV, Card Access Control, Intrusion Detection, ELV System,
• Good knowledge of Electrical / electronic control system
• Good knowledge on communication protocol will be advantage
• Strong execution and troubleshooting skills at remote site work
• Able to work independently with minimum supervision and under pressure
• Willing to work in outdoor environment
• Willing to be on standby on call duty

INFORMATION

Job Title: Process Engineer - Drive Innovation in Precision Manufacturing!

Company: A leading SME in precision component manufacturing with international presence.

Location: Singapore

ABOUT US

We are a dynamic and growing company specializing in the design and manufacture of high-precision metal components for automotive, appliances, energy, medical, photonics market. We are committed to innovation, quality, and customer satisfaction. We offer a collaborative and rewarding work environment where your contributions will have a direct impact.

ABOUT THE ROLE

We seek an experienced Manufacturing Process Engineer to join Operations team. The successful candidate will optimise manufacturing processes, improve productivity, and ensure high-quality products. This role requires strong technical knowledge, problem-solving skills, and collaboration with cross-functional teams.

KEY RESPONSIBILITIES

● Process Optimization:

○ Analyze and optimize zinc die casting processes to improve efficiency, reduce costs, and enhance product quality.

○ Implement process improvements, monitor results, and adjust as necessary.

● Process Design and Development:

○ Design, develop, and implement new die casting processes and tooling.

○ Collaborate with tooling designers to ensure optimal die design.

● Quality Control:

○ Develop and maintain quality control procedures.

○ Conduct regular quality audits to ensure compliance with industry standards.

● Equipment Maintenance:

○ Ensure proper maintenance of die casting machines and peripheral equipment.

○ Troubleshoot equipment issues and implement corrective actions.

● Safety and Compliance:

○ Ensure compliance with safety regulations and company policies.

○ Conduct risk assessments and implement safety improvements.

● Training and Development:

○ Train production staff on new processes and equipment.

○ Develop and maintain training documentation.

● Continuous Improvement:

○ Identify areas for improvement and propose solutions.

○ Lead or participate in continuous improvement initiatives.

● Collaboration:

○ Work closely with production, maintenance, and quality teams.

○ Communicate effectively with suppliers and customers.

● Project Management:

○ Manage projects related to process improvements, new product introductions, and equipment upgrades.

● Data Analysis:

○ Collect and analyze data to measure process performance.

○ Use data to drive decision-making and process optimization.

CANDIDATE’S REQUIREMENTS

● Bachelor's Degree or Diploma in Mechanical Engineering, Manufacturing Engineering, or related field.

● Minimum 3-5 years of experience in a manufacturing environment, preferably in molding/ casting or a related industry.

● Strong knowledge of metal component manufacturing and tool design.

● Experience with process optimization, lean manufacturing, and Six Sigma methodologies.

● Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

● Strong problem-solving, communication, and project management skills.

● Ability to work in a factory environment and prioritize multiple tasks.

● Advantage if candidate has experience in automation, robotics, and familiar with quality management systems (e.g., ISO 9001).