Location: Jurong East

Working hours - Mon – Fri, 8.30am – 5.30pm

Requirements

• Handling of equipment for military and security (eg Chemical Detector, Radiation detector, Biological Detection Systems for Military , Acoustic Hailing Equipment / System etc)
• IT software installation and configuration.
• Handling enquiries on products such as post-sales delivery of equipment
• Carry out maintenance,diagnostic analysis, trouble shooting and repair work for equipment.

Requirements

• Higher Nitec / Diploma in Electrical & Electronics Engineering with min 5 years relevant experience
• Experience in customer relations.
• Able to do Stand-by duty if required

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Network Engineer L2/L3

Duration: 12 months, initial contract (renewable)

Location: Singapore

Salary Budget $7,800 to $8,500

Exp: 05 to 10 yrs

• Assist in the daily monitoring and maintenance of network infrastructure, including routers, switches, and firewalls.
• Troubleshoot and resolve network connectivity and performance issues.
• Experience in WAP , Aruba Configuration and Troubleshooting is a must.
• Perform network configuration changes and updates as required.
• Implement network security measures, including managing access controls and firewall rules.
• Assist with the setup and management of VPNs and remote access solutions.
• Monitor network performance and generate usage and health reports.
• Support network upgrades and installations of new hardware and software.
• Participate in disaster recovery and backup procedures for network systems.
• Collaborate with other IT teams to ensure seamless network integration with other systems.
• Provide technical support for network incidents and escalate complex issues when necessary

APPLY through this Job Ad or by sending your CV to:[email protected].

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business

Our Training & Simulation Systems business has close to 40 years of experience in delivering innovative learning, training, and simulation solutions to customers in the defence, public safety and security, and enterprise domains. We envision to create a better future together through learning, training, and simulation.

Together, We Can Make A Significant Impact

The software developer is responsible for designing, coding, and maintaining existing C#.NET code for existing and future projects. Participates in the design and planning for new software features or solutions for existing coding problems and challenges.

Be Part of Our Success

• To design, build, and maintain a reusable and robust code using C#.NET for backend services.
• Design and implement database schemas, write complex queries, and optimize SQL database performance.
• To develop and maintain a responsive and user-centric front-end application using React and Javascript.
• Develop and consume RESTful APIs and ensure seamless integration between front-end and back-end systems. Familiarity with gRPC services for high-performance inter-service communication.
• Write unit and integration test to ensure code quality and reliability.
• Contribute to continuous improvement in the team by suggesting and implementing process enhancements.
• Collaborate with cross-functional teams to work closely with product managers, designers, and other developers to translate business requirements into technical solutions.

Qualities We Value

• At least 4 years of experience as a software developer
• Experience in full-stack development
• Knowledge in technologies such as C#.NET and SQL database
• Familiarity with front-end frameworks such as React and Javascript
• Ability to adapt quickly to tackle challenges using problem-solving approach.
• Understanding in Git/Azure DevOps for team collaboration.
• Has a strong interpersonal skill and able to simplify technical concerns for easy understanding between team members.

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits

Requirements:

• Nitec, Diploma or Degree in IT or Engineering related course
• Equipped with IT knowledge in hardware or software (e.g. desktop, server, and related software)
• Applicants with sales experience are preferred
• Sales and customer driven with strong selling, presentation and negotiation skill

Job Highlights

• Office Hours: Monday to Friday, 8:30 am to 6:00 pm
• Convenient Location: Walking distance to Kaki Bukit MRT
• Entry Level Applicants are welcome to apply
• Applicants with relevant experience may be considered for a Senior Sales Engineer / Assistant Sales Manager position
• Salary offer will depend on related work experience
• Sales commission and incentive are applicable

Job Description

• To prospect new customers and follow-up on sales enquiries to maximize sales opportunities
• To sell IT products and services
• (IT Hardware e.g. Laptop/Desktop/Server/Computer Accessories, IT Software e.g. Microsoft/Adobe/Autodesk, IT training courses)
• To do cold calling with a given database / B2B Sales
• Use of MYOB, CRM, and HubSpot
• To perform daily calls to prospective customers
• To achieve Sales Target
• Coordinate with marketing department on leads and opportunities
• Coordinate with purchasing department on sales orders
• To attend training on the latest IT hardware and software updates

Job Objectives

The Jobholder, as a member of the Flight Hour Services (FHS) entity, supports Fleet Health Lead for the delivery and performance of the Fleet Watch, Health Monitoring and operational support activities to both SIA A380 and SCOOT A320 Family fleet.

In his/her function, the job holder is responsible for maintaining SIA A380 and SCOOT A320 Family fleet to the highest Operational Reliability in line with airworthiness requirements EASA and CAAS and in accordance with Airbus Technical Standards and FHS Financial interests.

Job Responsibilities

Primary:

• Pre-Departure Check and Flight Watch activities on Shift basis
• Assist in the monitoring of Recurring Defects / Trend Monitoring with the usage of SKYWISE
• Support daily operations for main base and outstation
• Provide MRO with engineering recommendations for predictive and preventive maintenance
• Expedite Critical Mods at Line Maintenance in collaboration with Materials Management, Planning and Operations.
• MRO daily tasks management
• Support AOG events and critical troubleshooting on aircraft
• Support the preparation of AOG reports and coordinate any post-AOG follow-up
• Assess defect rectification opportunities in collaboration with Materials Management, Planning and Operations
• Serve as interface between Airbus Head Office Customer Support Department and Customer
• Support technical or ad-hoc projects and process improvement as required
• Provide technical support outside of office hours on shift and duty basis
• Ensure that emerging fleet issues are communicated to the TSP Engineering Avionics/Systems/Powerplant team for long term engineering follow-up

Secondary:

• Support and develop new Business case related to Aircraft On-Time Performance (AOTP) improvement
• Participate in SKYWISE development, trials and improvement
• Provide technical inputs to Fleet Health Lead to support TSC/RIC/TRM discussions
• Customer satisfaction acting on relationship, collaboration and performance
• Compliance with Regulation, Airworthiness and Quality standards,
• Adherence with Ethic and compliance directive and course fulfillment
• Propose additional values to support Airbus Services (Digital Tool, Methodology, MRO Standards…)
• Team ramp-up and competence development
• Team wellbeing and speak up

Job Requirements

• Minimum degree holder in Engineering or Aircraft maintenance license holder
• Minimum 5 years of relevant experience in Airline/MRO, in an engineering position
• Great organizational skills, flexibility managing multiple priorities, working to changing deadline and attention to details
• Unyielding commitment to excellence, delivering the best possible outcomes for customers
• Ability to work under stress
• Excellent interpersonal and communication skills, ability to work well in a team
• Maintenance environment experience is a strong positive
• Project/continuous improvement skills
• Possess Class 3/3A driver’s license

• Exposure to latest technologies
• On the job training

About the company
Our Client is an established company within their industry. They have a well-established presence of more than 10 years. With rapid expansion plan, they are now looking for an IT Engineer / IT Specialist (System & Networks) to join their team.

About the job
Reporting to the IT Manager, your role involves:

• Providing technical support (Computer, printer, mobile device and etc) to users
• Handling networks (Routers, switches, VoIP)
• Supporting and maintaining the Windows Servers and Office 365
• Managing Active Directory (Print Servers, Backup and etc)
• Handling disaster recovery planning
• Managing external vendors, ensuring SLA is being adhered to

Skills and experience required
As a successful applicant, you will have at least 2 years of experience in IT Support. Exposure to IT networks or system will be of added advantage.

Candidates with proven track record in Office 365 / O365 will be of added advantage.

Whats on offer
This is an excellent opportunity to join an established end user environment with on the job training

To apply online please use the 'apply' function, alternatively you can reach me at https://www.linkedin.com/in/hoonteck-nologyrecruitment. (EA: 94C3609/ R1219669)

Working with the development team, you will be responsible for the design development, documentation, testing and delivery of the software solution for an Automatic Fare Collection (AFC) system.

The activities required to be performed shall include the following:

• Requirements gathering;
• Design, development, and maintenance of the software;
• Preparation and submission of deliverables throughout the software development lifecycles such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the standard adopted by the Authority;
• Assist the Authority with day-to-day application support issues; and
• Liaise with users on the requirement, design and testing issues.

Qualifications & Requirements:

• Recognised degree in Computer Science, IT or engineering with at least 5 years’ relevant experience in software development;
• Gone through at least one full software development lifecycle (SDLC) with experience in producing SDLC documentations;
• Extensive experience in analysing requirements, designing, development and delivering complex enterprise applications in Java/JEE, web programming on UNIX / LINUX and Windows environment;
• Proficiency with database programming such as SQL and DAO, and relevant experience with MySQL, PostgreSQL
• Experience in Spring Framework and Spring Boot;
• Experience in Software Modernization, Containerization, Microservices;
• Experience in Agile development methodology and continuous integration;
• Experience in writing Requirements Specification, Use Cases, Design Documentation, object-oriented software design and UML modelling;
• Proficiency in AWS ECS and Docker containerization, with a solid understanding of DevOps principles and best practices
• Strong analytical and problem-solving skills; and
• Good written and verbal communication skills in English.
• Self-motivated and a good team player
• Added advantage if candidate is familiar with one or more of the following technologies:i.Experience in Message Queues and/or Solace;
  ii.Experience in Cloud Computing, Kubernetes & Dockers, AWS Services like Amazon ECS Fargate, AWS RDS & Lambda;
  iii.Experience in Automatic Fare Collection (AFC) system;
  iv.Experience in Microsoft Active Directory
  v.Experience in HTML / CSS / JavaScript / JSON
  vi.Experience in Secure Communications (SFTP, HTTPS, etc.)
  vii. Experience in Angular or equivalent
  viii.Experience in Java Unit Tests frameworks
  

Are you passionate about ensuring the highest quality in software services? We are seeking a Software Quality Engineer (QE) to join our team responsible for developing and maintaining disbursement system . As a QE, you will play a critical role in ensuring that our services are reliable, secure, and meet the needs of our users.

What to Expect:

• Test Planning & Maintenance: Create and maintain test cases and plans, ensuring they reflect the latest requirements and policy changes.
• Automation & Framework Development: Build, maintain, and improve automated testing frameworks and environments to enhance testing efficiency.
• Hands-on Testing: Conduct various forms of testing such as manual, functional, performance, and exploratory tests, and file defects when necessary.
• User Acceptance Testing (UAT): Support UAT activities, ensuring the system functions as expected before release.
• Production Support: Assist in resolving production cases to maintain high-quality operational systems.
• Agile Collaboration: Actively participate in all agile ceremonies, including stand-ups, sprint planning, and retrospectives.

Requirements:

• Educational Background: A degree in software engineering, computer engineering, electrical engineering, or an infocomm-related discipline.
• Testing Experience: At least 3 years of professional software quality testing experience with hands-on automation experience.
• Technical Skills:Strong understanding of testing techniques, test-driven development, and continuous integration/delivery.
  Experience with Java and Spring Boot frameworks is a plus.
  Familiarity with automated testing frameworks (Selenium, Cucumber, JUnit) or enterprise tools (HP UFT, QC, Mobile Center).
  Experience with performance testing tools like JMeter, Gatling, or enterprise tools such as HP LoadRunner.
  Knowledge of penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise-level tools (WebInspect, Nessus, CheckMarx).
  
• Agile Experience: Working experience in Agile environments is highly preferred.
• Soft Skills: Excellent verbal communication and listening skills, coupled with a proactive, self-driven, and motivated attitude.

Why Join Us?

• Be part of a team improving the quality of essential public services in Singapore.
• Work in an Agile environment that values continuous improvement and innovation.
• Enhance your skills in test automation, security, and performance testing using cutting-edge tools

Are you passionate about ensuring the highest quality in software services? We are seeking a Software Quality Engineer (QE) to join our team responsible for developing and maintaining disbursement system . As a QE, you will play a critical role in ensuring that our services are reliable, secure, and meet the needs of our users.

What to Expect:

• Test Planning & Maintenance: Create and maintain test cases and plans, ensuring they reflect the latest requirements and policy changes.
• Automation & Framework Development: Build, maintain, and improve automated testing frameworks and environments to enhance testing efficiency.
• Hands-on Testing: Conduct various forms of testing such as manual, functional, performance, and exploratory tests, and file defects when necessary.
• User Acceptance Testing (UAT): Support UAT activities, ensuring the system functions as expected before release.
• Production Support: Assist in resolving production cases to maintain high-quality operational systems.
• Agile Collaboration: Actively participate in all agile ceremonies, including stand-ups, sprint planning, and retrospectives.

Requirements:

• Educational Background: A degree in software engineering, computer engineering, electrical engineering, or an infocomm-related discipline.
• Testing Experience: At least 3 years of professional software quality testing experience with hands-on automation experience.
• Technical Skills:Strong understanding of testing techniques, test-driven development, and continuous integration/delivery.
  Experience with Java and Spring Boot frameworks is a plus.
  Familiarity with automated testing frameworks (Selenium, Cucumber, JUnit) or enterprise tools (HP UFT, QC, Mobile Center).
  Experience with performance testing tools like JMeter, Gatling, or enterprise tools such as HP LoadRunner.
  Knowledge of penetration testing tools (ZAP, Burp Suite, SQL Map) or enterprise-level tools (WebInspect, Nessus, CheckMarx).
• Agile Experience: Working experience in Agile environments is highly preferred.
• Soft Skills: Excellent verbal communication and listening skills, coupled with a proactive, self-driven, and motivated attitude.

Why Join Us?

• Be part of a team improving the quality of essential public services in Singapore.
• Work in an Agile environment that values continuous improvement and innovation.
• Enhance your skills in test automation, security, and performance testing using cutting-edge tools

Shift Operations Engineer (12 Hours Shift)

• Simulate user issues to identify and resolve network and connectivity problems. Conduct root cause analysis to pinpoint the source of infrastructure incidents and devise temporary and permanent solutions.
• Recommend system modifications to address ongoing issues. Oversee updates and maintain an accurate system inventory.
• Mentor and train teams on resolving infrastructure-related incidents.
• Lead the planning and requirements phases of infrastructure network operations projects.
• Contribute to the design and implementation of infrastructure replacement plans. Manage the implementation of approved infrastructure changes and maintenance routines.
• Oversee network operations activities and the installation of network systems according to design specifications. Ensure alignment with service level agreements.
• Develop and manage service-level objectives and targets. Monitor performance to meet or exceed requirements.
• Develop client satisfaction metrics and service procedures. Propose recommendations to improve performance and client satisfaction.
• Pilot new tools, technologies, and processes to enhance infrastructure performance.
• Manage infrastructure network testing and implementation.
• Address identified vulnerabilities and ensure solutions are implemented in accordance with company policies.
• Gather performance and data usage statistics for capacity planning and reporting.
• Perform ongoing tuning and optimization of infrastructure network hardware and software components.
• Manage and troubleshoot SDWAN infrastructure.

Requirements:

• Bachelor's degree or equivalent diploma in IT, Computer Science, or related field.
• Certified in CCNP, NSE, and CCSA.
• Cloud certification and experience preferred.
• Proficient in network management tools such as SolarWinds, WLC, FortiAnalyzer, and FortiManager.
• Understanding of cloud network architecture, particularly Azure.
• Strong communication and interpersonal skills.
• Flexible to work outside of standard business hours.

To apply, please visit www.gmprecruit.com and search for Job Reference:24985

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking a Senior QA Engineer who will be responsible for developing and implementing effective QA strategies and methodologies and carry out detailed functional testing to ensure products are well tested before market release. In this role, you will be required to work closely with the development team and product managers to ensure that the products meet the quality standards. You will also be responsible for creating and maintaining test plans and schedules.

Job scope and Responsibilities

• Work with product stakeholders to work out test strategy and create product test plan for new products and maintain the test plans for existing products.
• Perform product inspection and functional testing for quality and conformance to product specifications and deliverables.
• Generate test reports and conduct processes such as data and result archival
• Participating in product quality review meetings with product stakeholders
• Conduct Investigation of internal and customer reports of product quality issues and perform follow up testing, documentation and reporting.
• Monitor and maintain product issue logs and provide updates to managers and product development team.

Requirements & Skills

• Minimum 3 years of experience in product software or system testing
• Experience in leadership roles, especially in QA relevant positions will be favorable
• Strong knowledge of products or software QA methodologies and tools
• Good analytical and troubleshooting skills
• Strong communication and interpersonal skills
• Strong in written communication and report writing
• Ability to work in a fast-paced environment and meet deadlines
• Experience or expertise in any of the following domain areas will be favorable:
  • Networking or networking domain knowledge (CCNA, CCNP) or products e.g. router or switch
  • Software development and/or test automation scripting
  • Cybersecurity domain knowledge (e.g. SSCP, CISSP) or products, e.g. encryption, IDS or firewall products
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

On behalf of the hiring company that is in the Built Environment OEM space, we are looking for suitable personnel to join them as Software Development Executives (electrical background):

Responsibilities :

• Software Design: Develop software for various vertical transportation systems, including Housing & Development Board (HDB), private, and modernisation systems. Refer to approved layout drawings, production requests, machine applications, client specifications, and electrical straight diagram drawings.
• Electrical Diagram Review: Interpret and verify electrical straight diagram drawings from the Hardware Design Department. Identify and report any inconsistencies or errors.
• Documentation and Communication: Issue notices, instructions, software documents, and contract-related materials as needed.
• Factory Support: Assist factory testing staff with job software design and technical troubleshooting during system testing.
• Design Optimisation: Ensure that software designs are cost-effective and fully comply with client specifications and project timelines.
• Error Investigation: Participate in investigating software errors and develop corrective and preventive measures. Collaborate with the Electrical Department to address any discrepancies between software and hardware designs and resolve issues before shipping the system to the site.
• Field Support: Assist system installation staff during on-site installations. Troubleshoot problems, and modify software as necessary to meet client requirements.

Requirements

• A diploma (at least 3 years) or degree in Electrical Engineering
• Familiar with programming languages such as C, C++, etc
• Familiar with schematic or single-line designs/drawings
• Able to work independently and as a team

Remuneration will be pegged to qualification and experience

Location: East (near to MRT station)

EA Licence : 22C0971 | EA Registration : R21101298

Job Description

• Review project specifications and technical clarifications
• Prepare method statements and check drawing discrepancies
• Carry out project planning, design, material requisition, cost control, project supervision and documentation
• Supervise the M&E works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• Coordinate with other trades to ensure smooth work progress
• Ensure all M&E works are compliance with all necessary standards, code of practice and safety regulations
• Attend all the meeting as and when required
• Temporary M&E works (eg: site office, trial holes, temp power supply etc)
• Any other duties assigned by the Management

Job Requirement

• Diploma/Degree in Mechanical or Electrical Engineering or equivalent
• Min 5 years experience in Construction Industry
• Good communication skills and ability to work independently
• AutoCAD & Revit Certificate

• Singapore Based (City Hall, may need work at site)
• 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
• Minimum of 5 years of relevant site / building construction experience.
• Career Progression Opportunities

Requirements

• Minimum of 5 years of relevant site / building construction experience.

Roles & Responsibilities

• To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
• To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
• To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
• To ensure that the related documentations are updated and ready for ISO audit.
• To cooperate with the safety department and carry out the assigned duties within the safety framework.
• Assist site management team in project Planning & coordination.
• Plan and schedule work sequences for construction operation.
• Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
• To study tender / construction drawings, specifications, and contracts to understand project requirements.
• Understanding of critical project criteria related to schedule & productivity.
• Able to provide guidance to new staff / junior staff.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Senior Engineer to be part of our Facilities Department diverse team of talent. You will be the Subject-Matter-Expert for both the UPW & Chemical Systems.

What you will be working on:

• Plan and execute preventive and corrective maintenance activities for chemical, slurry and gas systems including chemical waste collection systems to ensure maximum equipment uptime and reliability.
• Manage on-site Total Gas and Chemical Management (TGCM) and Bulk Gas Plant contractors to ensure excellence in operations, maintenance, quality standards and safety compliance.
• Respond to issue and perform troubleshooting with on-site TGCM team, Bulk Gas Plant operations team and contractors.
• Work with Manufacturing and Quality teams on excursion root cause identification, elimination and prevention.
• Initiate, evaluate, plan, design and supervise all improvement or upgrading or new projects for chemical, slurry, gas and chemical waste system.
• Include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, and code compliance.
• Work in a team effort with other engineering, operations, maintenance, and construction disciplines to provide detailed designs and specifications for the installation of new capital equipment and systems.
• Identify and implement new technologies for chemical, slurry and gas systems for process breakthrough.
• Carry out cost estimates, analysis, cost and schedule estimates as well as justification of proposed projects.
• Responsible for maintaining various administrative and engineering database in support of job tracking, engineering data, and costing.
• Provide support for new chemical and gas evaluations.
• Plan and execute specialty gas system release/unhooking.
• Review and improve Operation and Maintenance Standard Operating Procedure and Risk Assessment.
• Support ISEP and Facilities operations concerning chemical, slurry and gas management/operations/storage/maintenance works.
• Carry out FMEAs (Failure Model and Effect Analysis), eliminate single points of failure and mitigate risks.
• Analyze systems to identify improvements that will result in better performance, efficiency gains, reduced maintenance, and cost savings.
• Work with Quality department to ensure the quality of chemicals, slurries and spec gas.
• Be aware of and perform all works in accordance with company safety guidelines.
• Benchmark with other Micron sites on operational, procedural, engineering, and design BKM of Facilities buildings and systems.

More About You:

• Master/ Degree in Chemical Engineering
• Min 4 years of relevant experience in Semiconductor Wafer Fab environment
• Hands-on experience in day-to-day operation and maintenance is essential
• Functional / Technical Skills and Knowledges:
• Operation and maintenance of Ultrapure Water, Wastewater, Chemical, Gas and Bulk Gas Systems

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We're searching for Associate Engineer to be part of our Furnace Equipment department diverse team of talents.You will be responsible to assist the Engineers to improve and sustain equipment performance and Cpk indices to meet operations goals

What you will be working on:

• Perform 12-hour shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production
• Perform scheduled preventive maintenance (PM) and calibration on a timely basis
• Assist Engineers in the installation and hook-up of new equipment
• Trouble-shoot equipment-related issues and minimize equipment downtime
• Assist in implementing process improvement projects
• Assist new Associate Engineers on their On-The-Job-Training (OJT) by acting as their buddy
• Participate in QIT programs to improve productivity and output quality of the Module, and constantly monitor and feedback to Engineers to improve performance of equipment to meet Module objectives
• Maintain good housekeeping in the production area, ensuring good safety practice and also safe custody of tools, equipment and other properties belonging to the Module

More about you:

• Min 2 years of relevant working experience
• Direct experience in Furnace Equipment will be advantage
• Willing to work in 12-hours shift

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

• Work closely with internal and external stakeholders to manage the technical risk, security operation and SOC.
• Act as IT security expert for department in the areas of cyber security assessments, PAM, Database, WAF, Firewall and EPP/EDR.
• Perform risk assessment and identify mitigation controls for the risk area identified.
• Enhance and build cyber threat detection user cases and assist in analyzing and reducing false positive.
• Identify infection/compromise in the company utilizing threat intelligence and indicators of compromise (IOCs) from different threat Intel sources and regulators.
• Ensure all compliance and security control functions are performed timely and orderly.
• Drive continuous improvement of procedures and processes related to cybersecurity process and operations monitoring.
• Track, monitor and valid security-related and risk issues, provide an action plan to rectify the issues and prevent recurrence.
• Generate security reports and metrics as required.
• Provide timely and periodic update to managements on its security matters.
• Stay current on the latest Cyber threats, Attacks and vulnerabilities etc.
• Good diploma or degree in Computer Science, Digital Forensic or Engineering preferred.
• Preferred minimum of 6 years of relevant work experience in IT security auditing or security operation role.
• Strong knowledge in internet infrastructure, networking technology and security (i.e. DNS, DHCP, Firewall, WAF, IDS, IPS, VPN, APT and TCP/IP protocols)
• Working experience with major SIEM will be advantage
• Strong practical experience in Cyber security: Cyber kill chain, TTP, threat intelligence, malware triages.
• Demonstrated ability to multitask and is detail-oriented with inquisitive mind during case investigation.
• Good team player with strong communication skills with project teams, stakeholders, senior management, and contractors including both technical and non-technical personnel.
• Professional security related qualification (e.g. CEH, ECIH/GCIH, and ITIL) will be favorable although not mandatory technical skills

• Evaluate design package and prepare shop drawing of RC structural works and temporary works.
• Liaise structural design works with design-relevant counter parties and construction team.
• Design of temporary works related to structural design.
• Lead the project department in solving design related matters.
• Manage production, quality, design & engineering and schedule issue.

Requirements:

• Degree in Civil Engineering or equivalent
• At least 5 years of civil & structural works experience in Infrastructure/LTA Projects.
• Proficient in STADD, AutoCAD, MicroStation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Field Service Engineer

5 Days (Mon-Fri)
830am-5pm
$2,800-$3,800 + $120 Transport Allowance
Sembawang

Responsibilities:

• Attend to client side to solve their machineries issue

Requirements:

• Knowledge of Electrical & Mechanical
• Few years of hands-on experience on repair & servicing of machineries
• Able to travel within short notice (Oversea - ASEAN Countries)
• ITE or diploma Cert

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Job Summary:

We are seeking a talented IT Engineer - MES who will be responsible for the integration of Computer Integrated Manufacturing (CIM) systems and Manufacturing Execution Systems (MES) focusing on improving efficiency and productivity to enhance manufacturing processes.

Mandatory Skill-set:

• Degree in Computer Science, Computer Engineering;
• At least 2 years of experience in supporting Manufacturing Execution System (MES) applications (e.g., Siemens Opcenter, Rockwell FactoryTalk);
• Proficiency in programming languages such as SQL, Python, or C#;
• Working knowledge in Unix scripting;
• Good understanding in application server, client application and database (i.e. Oracle);
• Independent and proactive yet a strong team player;
• Excellent spoken and written communication skills.

Desired Skill-set:

• Experience in Tibco (TIB / RV) in high technology manufacturing environment.

Responsibilities:

• Provide L2 and L3 support for production systems, focusing on monitoring, maintaining, and continuously improving the Manufacturing Execution System (MES);
• Ensure the proper operation of production lines concerning products, routes, operations, equipment, recipes, and lot movements;
• Analyze user requirements to perform MES modeling and configuration for changes in material flow;
• Participate in User Acceptance Testing (UAT) and System Integration Testing (SIT) to validate system performance and functionality;
• Offer both user and system support during pre-implementation and post-implementation phases to ensure a smooth transition and operation;
• Ensure that development tasks are completed on time, adhering to corporate policies and guidelines, with proper documentation;

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

Quality Engineer (12 months contract)

Industry: Aerospace

Contract Duration: 12 months

Salary: Up to $5,500 (Bonus: 1 month of bonus for every 12 months of completed service)

Work Location: Bedok

Work hours: Rotation Shift, 0730hrs to 1648hrs / 1648hrs to 1728hrs, Mondays to Fridays

Job Description

Roles & Responsibilities

• Develop detailed inspection plans for aerospace components and assemblies, ensuring compliance with customer requirements, engineering specifications, and regulatory standards.
• Collaborate with design and engineering teams to define the most appropriate inspection methods and criteria for new parts, assemblies, and systems.
• Identify and select suitable inspection tools, techniques, and measurement equipment (e.g., CMM, optical, gaging etc.).
• Establish acceptance criteria and tolerances for aerospace products based on engineering drawings, material specifications, and industry standards.
• Create and maintain detailed inspection reports, documentation, and records, ensuring that all inspection activities are traceable and compliant with regulatory requirements.
• Develop inspection records that support traceability and certification, including first article inspections (FAI), in-process inspections, and final inspections.
• Create CMM or Gear Programming for in process inspection and final inspection.
• Ensure that all inspection processes adhere to aerospace industry standards, including AS9100, AS9110, AS9120, NADCAP, FAA regulations, and customer-specific requirements.
• Ensure compliance with safety standards and regulations, ensuring that all personnel are trained and knowledgeable about relevant protocols.
• Support internal and external audits related to inspection processes and quality assurance systems.
• Investigate and perform root cause analysis for any quality issues or inspection failures, using tools such as 8D, FMEA, and Fishbone diagrams.
• Lead initiatives to improve inspection processes, reduce inspection times, and increase the accuracy and reliability of inspections.
• Stay current with the latest inspection technologies, methodologies, and trends in the aerospace industry.

Requirements

• Diploma/Degree holder
• Strong knowledge of engineering drawings, tolerances, and geometric dimensioning and tolerancing (GD&T).
• Proficiency in the use of inspection tools and equipment (e.g., CMM, calipers, micrometers, etc.).
• Strong analytical and problem-solving skills with the ability to perform root cause analysis and propose corrective actions.
• Good working knowledge on Quality Management System meeting AS9100, AS9102, AS13100 requirements.
• Competent in Microsoft Office applications.
• Experience to use simple CAD/drawing software, well on engineering drawing interpretation.
• Knowledge of Co-Ordinate Measuring Machine (CMM), and Non Destructive Testing (NDT) will be added advantages.
• Effective communication and interpersonal skills.
• Able to work rotating shifts.

Please submit your updated resume in Word format by using the Apply Now Button.

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.

Tel: 6950 9741

http://www.peopleprofilers.com

EA License Number: 02C4944

Registration Number: R1106021

Posting Personnel: Sherry Yeoh Xianni

Duties and Responsibilities (including but not limited to):

1. Member of OE internal Senior Project Management Team (PMT) that meets regularly (chaired by DPD/SOR) to discuss progress and resolve any internal OE issues.
2. Overall management and leadership of the multi-disciplinary Resident Site Staff Team, supervision of temporary and permanent construction works to ensure that Contractor’s conform with the Contract Specifications and other obligations under their Contracts.
3. Fulfil the statutory role of Qualified Person (Supervision) (QP(S)) under the Building Control Act for all Construction Contracts including all specific obligations and sign-offs.
4. Joint Leadership on HSE for the Project along with senior management of NEA, OE and the Contractors, with specific focus on construction safety and environmental controls during construction.
5. Work closely with the EDM and other Core Team discipline managers in the Core Team to provide construction related input to the review/approval of design and technical submissions made by the Contractors.
6. Review/sign-off (with the necessary inputs from the relevant RSS and Core Team members) of construction related Method Statements and all other site-related documentation required under the construction Contracts.
7. Direct liaison with NEA’s Deputy Project Director and Technical Directors as may be required. Direct Liaison with the PUB Detailed Design Consultant’s Construction Manager regarding the interfacing and logistics management between the IWMF and TWRP projects.
8. Attendance (if required) at NEA Monthly Project Steering Committee Meetings chaired by NEA DCEO and any other relevant high-level meetings as required by MEWR or NEA
9. Organising and chairing regular Progress Meetings with Contractors to review progress (with the assistance of the OE Senior Planner) and performance/quality and to resolve any site related issues including interfacing between IWMF Contractors and other Contractors.
10. Review (with the input and support of the relevant RSS and Core team members) and sign-off of Contractor’s Monthly Payment Claims.
11. Work closely with and support the Contracts Manager in the assessment of Contractor claims, VO and EOT requests.
12. Organising and chairing regular internal RSS team co-ordination meetings as may be required.
13. Any other matters that may from time to time be delegated by the DPD/SOR or the PD/SO.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303