• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

Process Technician /Assistant Process Engineer
Working location: Ang Mo Kio
Working date and time: 8.30am-6.15am (Mon-Fri)
Salary: $2,000-$3,000 + AWS + Bonus

Responsibilities

• Perform Lapping / Polishing process, machine installation and training.

Experience & Qualification

• Min. Higher NITEC / Diploma in Electrical or Mechatronics discipline graduates or any technical qualification in Precision Engineering.
• Knowledge of Mitsubishi or Siemens PLC is added advantages.
• Preferred candidates with min 2-3 Years Working Experience in Precision Engineering machine operation or machinery servicing.
• Can read technical drawing
• Able to use the measuring tool example micrometer, height gauge, CMM
• Knowledge on using Auto Cad

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Passionate candidates having a sufficient knowledge and exposure in electroplating processes & the laboratory activities, are requested to submit their resume. Having a minimum 1 year of experience is prefereable for the post. Only the locals and the Permanent Residents are invited to apply for the post.

We are looking to hire an Process Engineer to work on projects in the Pharmaceutical and Biopharmaceutical sectors.

Key responsibilities:

• Design of process and utilities – preparation of PFDs, P&IDs, equipment sizing calculations
• Coordination of design with other design disciplines and equipment suppliers
• Ownership of equipment modules and packages through design and procurement phases
• Completion of Design Risk Assessments
• Participation in Technical and Safety reviews
• Interfacing with client design team/end users
• Process optimization/site support

Requirements

• Degree in Chemical/Process Engineering (or equivalent)
• At least 3 years of design experience in the Pharmaceutical and Biopharmaceutical sector.

What you can expect

• The opportunity to work on a range of projects, from conceptual stage through to detailed design, commissioning and qualification.
• Career enhancement due to the wide scope of the projects and experience you will receive.
• To receive a very completive salary
• Work closely with Industry leading Engineers

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Operations Executive to join their Warehouse Operations team, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Optimize warehouse and administrative processes for efficiency.
• Identify and address improvement opportunities with staff and leaders.
• Drive projects to reduce waste, enhance productivity, and ensure sustainability.
• Implement digital tools to streamline workflows and improve the work environment.
• Present proposals to customers and coordinate implementation with stakeholders.
• Achieve annual targets for cost savings, sustainability, and customer improvement goals.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of warehouse operations, with exposure in process improvement projects
• Experience in automation tools such as powerbi, Python or power automate

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Waste Management Company
• Position Title: Process Engineer
• Working Location: Tuas (Transportation Provided)
• Working Hours: Monday – Friday, 8 am – 5 pm; Saturday, 8 am – 12 pm
• Salary Package: Up to $4,300 + Company Transport/Transport Allowance + Site Allowance + AWS + Quarterly Incentives + Performance Bonus + Joining Bonus
• Duration: Permanent

Key Responsibilities

• Analyze and evaluate existing processes, record measurements, and interpret data, specifically focusing on SCADA system operations to align with the company’s digitalization goals.
• Conduct comprehensive risk assessments to ensure operational safety and compliance.
• Research, design, and develop processes to optimize productivity and workflow within the facility.
• Oversee the operations and maintenance of facility processes to ensure they run smoothly and efficiently.
• Determine the organization and setup of operations to improve process efficiency.
• Manage the implementation of new processes and procedures within the plant.
• Investigate and troubleshoot any issues that arise with processes, procedures, and operations to prevent downtime and losses.
• Develop best practices, routines, and innovative solutions to enhance throughput and the quality of output.
• Manage cost and time constraints to ensure projects and process improvements are cost-effective and timely.
• Provide detailed process documentation and operating instructions to promote standardization and understanding among staff.
• Actively participate in and perform Process Safety Management (PSM) and Hazard and Operability Study (HAZOP) to maintain safety and operational standards.
• Serve as a turnkey manager to plan and execute plant shutdowns, minimizing impact on production.

APPLY NOW!!!

• Bachelor’s degree in Chemical Engineering or a related field.
• Minimum of 1 year of experience in the process industry.
• Strong working knowledge of process-related standards, process improvement, and safety management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69362 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Responsibilities:

• Prepare and execute all assigned validation and re-validation protocols, as well as engineering study protocols.
• Monitor and manage the validation and re-validation status of machines and systems.
• Monitor machine performance to ensure high quality and yield results.
• Improve process performance to maintain product quality and quantity.
• Ensure calibration compliance at all times to adhere to Quality System Regulation (QSR).
• Document and prepare monthly, bi-yearly, and annual calibration of requirements and tools.
• Support engineering team members and other departments with projects, yield improvement, validation activities, troubleshooting and engineering studies.
• Annually qualify and re-certify the sterilizers used in production.

Requirements:

• A degree in any engineering field.
• Minimum of 2 years of experience as a Process Engineer in the medical device manufacturing industry.
• Proficiency in mechanical and/or electrical engineering.
• Strong verbal and written communication skills.

Job description

Roles & ResponsibilitiesAnalytical Laboratory:

• Process control (Eg. Production parameter control)
• Quality control (Eg. Finished goods periodical testing)
• Familiar with the operations/technique of analytical instruments
• R&D of new processes on a lab-scale
• Maintain and control of laboratory analytical and testing records

Process:

• Perform First-Article testing for new customers or parts, prior to mass production
• Perform review/gap analysis on customer’s specifications for chemical processes, with adequate process control measures
• Involve in quality issues investigations, troubleshooting, root cause analysis and corrective action implementation
• Lead investigations for recovery action on any non-conformity
• Control of chemical logistics for entirety of production

Waste-water treatment plant (WTP):

• Manage and maintain WTP at optimum system performance for treatment of chemical waste
• Troubleshoot WTP system issues when waste discharge is non-compliant to Trade Effluent standards
• All other tasks that might be assigned from time to time

The key functions of Process Engineer is to:

• Applies engineering principles and techniques to optimise the production processes in a manufacturing environment to meet organization objectives
• Analyse and troubleshoots process engineering, manufacturing and /or maintenance issues and recommends engineering solutions, and develops work instructions for out of control processes
• Leads production and manufacturing systems improvement projects, and develops operation plans in accordance with organization objectives and other regulatory requirements.

Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Mechanical /Microelectronics / Chemical Process / Chemistry / Physics/ Material Science/Material Engineering
• Min 7 years of relevant work experience in Etch Process or BEOL
• An excellent team player with good interpersonal, communication and written skills
• Strong leadership capabiity to lead and guide junior engineers
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

• Operate the process to meet the conditions specified in manuals/instructions
• Operate the process equipments at site in accordance with operation plan.
• Take measures to improve production status and equipment performance on productivity and quality after approval of shift senior technician
• Patrol plant process, confirm the condition of process and equipments and report disordered matter to senior shift technicians.
• Prepare and organised patrol records
• Take a sampling for analysis of products and process evaluation.
• Report all incidents, near misses, deviation from plan and take part in further investigation when required.
• Assist in coordination of daily maintenance planning, and participate in maintenance activities and shutdown/start-up of sections.
• Provide support for maintenance group /quality control group, if any problem arises.
• Work as shift Analyst , when designed by supervisors
• Perform the role as an auxiliary fire Fighter

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

Our client is an European MNC, leading player in telecommunications industry. They are looking for a Human Resource Manager to assist their HR team for the next phase of their business. They are located in Central - easily accessible.

Duties of Human Resource Manager:

• Plan and manage manpower requirements across short-, medium-, and long-term horizons, ensuring alignment with organizational needs.
• Monitor and report on resource activities, addressing deviations from plans and taking corrective action.
• Maintain a comprehensive database of updated job descriptions and oversee the creation of new roles in collaboration with hiring managers.
• Stay updated on HR manpower planning techniques, recommending improvements for greater efficiency.
• Manage end-to-end recruitment, including sourcing, interviewing, background checks, and onboarding.
• Develop and oversee performance management frameworks to drive employee engagement and growth.
• Implement process improvements across the employee lifecycle and drive leadership development programs.

Requirements:

• Min Degree in relevant discipline.
• Proven track record in company's HR improvement process.
• Min 10 years of HR experience, with 6 years in HR Management level.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

Our client is a leading global company in semiconductor and FPD production equipment.

Working Location: Woodlands
Working Hours: Monday – Friday @ 8.30am - 6.30pm

Responsibilities:

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, define processing or handling
• equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in a cleanroom environment

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E

• EA License No. 01C4394

• Registration No. R23112260 (MayThinKyu)

Key Roles and Responsibilities

• Perform front end engineering design (FEED) and basic design for Process Design, Review and Engineering for centralised utility facilities, utility power and water, petrochemical industries and utility scale renewable projects.
• Develop P&ID, mass and heat balance, process flow diagram, operating/ control philosophy, overall supply scheme, layout, equipment specification, yield analysis etc.
• Develop and continually improve internal engineering best practices and procedures to provide engineering services of high quality in support of the various projects.
• Lead in process design and review inter-disciplines design/ engineering with consideration for safety, quality, performance, reliability, flexibility of operation with optimal project and life cycle cost.
• Conduct engineering activities during business or project development including but not limited to pre-feasibility/ feasibility studies, technical due diligence, cost estimation, site survey, technical proposal to customer, project / EPC scoping strategy, vendor selection and review, determine LCOE, budgetary quotation review and clarifications, and all related technical support and solutions etc.
• Evaluation of new technology and innovation solutions.
• Participate in engineering activities during project execution including but not limited to preparation of Scope of Work / Design Memorandum / Minimum Functional Specification, tender review on technical proposals and clarifications, attend site queries and site installation issues that related to design, pre-commissioning, testing and commissioning, PSSR etc.
• Participate in HAZOP, QRA, EIA studies.
• Review and approval of detailed design submitted by Contractors and ensure compliance with Standards and all the company best practices.
• Familiar with multiple energy resource simulation and and optimisation tools.
• Establish system and documentation for company engineering standards & specification, ITP, approved vendor/manufacturer list, material specifications, discipline’s schedule of rates and cost estimate template, engineering checklists etc.
• Ensure all activities carried out are in full compliance to all regulatory and authority requirement.
• Ensure engineering support is provided in a timely manner to all stakeholders through resource planning, close collaboration with discipline engineers and team members, contractor management, etc.
• Where applicable, provide training and guidance other team members.

Key Decisions & Dimensions

• All activities in full compliance to all legal / authority requirements.
• All projects (development and execution) are to be designed, executed and performed to a high quality at competitive costs, safely, within schedule, within budget and meet Sembcorp and industry quality requirement.
• All value engineering and strategic plans developed shall ensure Capex remain competitive, are sustainable and meet the company’s business and operational needs.
• All developed and accumulated knowledge / value must be systematically retained within company

Qualifications & Experience

• Bachelor’s Degree in chemical engineering, process design and engineering discipline or equivalent
• At least 10-15 years of experience in energy business related engineering management and project management (engineering and construction).
• Experience in power and water utilities as well as renewable energy projects is preferred.
• Good command of multiple energy resource simulation and optimisation tools is preferred.

Skills / Competencies & Preferred Characteristics

• Demonstrate critical thinking skill, positive attitude, teamwork, analytical, communication skill, leadership skill.
• Strong self-motivation and work ethic, flexible and thrives under pressure.

Responsibilities

• · Leading Process Design Team for Oil & Gas Projects and guide a team of about 10 Process Design Engineers / Designers to finish the Process design (start from Basic design to Detail Design) of the project.
• · Leading a Team of Process Engineers & Designers in Preparation & Review of PFD, P&IDs, MSD, PSD, Hydraulic calculations, Equipment sizing calculations, BOG calculations, Heat Loss calculations, Tank Venting calculations, Tank capacity calculations, Heating coil calculations, PSV calculations, Process data sheets for Equipment’s such as pumps, compressors, Refrigeration unit, Tanks, Process data sheets for Instruments such as control valves, PSV, PT, TT, LT, Flow meter, Process line list, Heat & Material Balance, HAZOP & SIL Study, Operation Manual, Process control Narrative, Cause & Effect Diagram, Surge Analysis.
• · Review & Checking of Process Documents such as PFD, MSD, P&IDs, Hydraulic Calculations, Process Data Sheets, Surge Analysis, Design Calculations etc to ensure that all the Process documents comply to applicable Codes & Standards and Project Requirements
• · Review & Checking of Surge Analysis report using Pipenet Transient Module for product loading/unloading operation, fire water network systems etc.
• · Review & checking of various process philosophies like Process Control Philosophy, Operation Philosophy, Cause and Effect diagram, Flare and blowdown philosophy, isolation philosophy, Vent & Drain philosophy, shutdown philosophy.
• · Participation in Design Review, HAZOP Study, SIL Study, HAZID Study, ALARP, Bow Tie, MAHM, RAM Study, Alarm Rationalization workshop, SIMOPS, Constructability review carried out during various stages of project.
• · Review Hazop Report, SIL Assessment & Verification Report & Responsible for Closure of all Hazop & SIL Study Recommendation
• · Preparation & Implementation of checklist for all Process Documents
• · Management of Process Discipline Engineers Team for development of Process Design of Major Projects from feasibility studies through Conceptual Design to Detail Engineering.
• · Pre-Bid, FEED & Detailed Design documents review.
• · Maintain Design integrity and quality within the Process Engineering Team.
• · In-house Engineering Activities and Process Engineering Man Hours Estimation and Schedule.
• · Preparation, Monitoring and Control of Process Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Responsible for Process Engineering Execution Methods and Procedure, Process Engineering Disciplines Co-ordination, Process Engineering Deliverables delivery for Project Execution, Process Man-hours Monitoring, Attending design review Meetings with Clients and Package vendors, PSSR+HAZOP+SIL study.
• · Inter Discipline Review of other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc for consistency, quality and Design Integrity.
• · Review of Authority submission documents like Fire Fighting Calculations (Fire & Foam network hydraulic and Surge Analysis, Fire Fighting Design Philosophy).
• · Development & Review of automated excel spreadsheets for process calculations.
• · Preparation, Monitoring and Control of Engineering Document Control List and expedite for delay/ approvals/resolution of open issues.
• · Review and ensure that all Process works are carried out in accordance with project specification. Maintain Design integrity and quality within the Process Engineering Team.
• · Preparing Process Engineering schedule and Process Engineering Man hours estimation to meet project requirements.
• · Co-ordinate with other Discipline for Process Inputs and ensure seamless Inter Discipline co-ordination between Process and other Discipline.
• · Job assignments, Mentoring and Supervision of works for Process Designers and Design Engineers.
• · Technical assistance to construction activities and attending to Site Queries.
• · Reviewing Vendor Drawings for Equipment’s and Instruments in terms of Process.
• · FEED & Pre-Bid works which involves Feasibility study.
• · Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness, and correctness in works.
• · Implement HSE objectives, policy, and company HSE procedures within his authority limit.
• · To integrate Risk-based thinking and HSE considerations into business decisions, plans and operations with the commitment to eliminate and reduce HSE hazards, aspects and risks.
• · To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• · To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects, and risks.

Requirements

• · Preferably Bachelor’s Degree in Chemical Engineering
• · Preferably to 15 years in Oil & Gas industry

Software Requirements

• · Proficient in Pipenet, Hysis, MS Excel, MS Word

Code Knowledge

• · API 2000, API 520, API 521, API 526, API 2350
• · SS 532
• · NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Job Title: Chemical Process Technician
Location: Tuas
Working Day: Monday to Thursday (2 weeks rotation)

Sunday to Wednesday

Working Hours: 7.45 a.m. to 7.45 p.m.

: 7.45 p.m. to 7.45 a.m.

Salary: up to $2400(Depends on experience)

Job Duties:

• Need to countercheck raw material needed for the mixing.
• Maintain the tanks and surrounding area free of dirt.
• Coordinate with group to do inline cleaning in place and steam in place.
• Documentation for RMR including bubble point test and chemical weighing
• Regeneration of RO water system

Job Requirements:

• Diploma in chemical field
• Minimum of 1 - 2 years experience in cleanroom area and Pharmaceutical field.
• Able to handle hazardous chemical
• Prioritize with chemical hazardous certificate

WONG MENG KANG
Superform Consulting Pte Ltd
R1988500/15C7536

Our client is a manufacturer that designs, builds and markets its semiconductor manufacturing equipment used in the production of integrated circuits. They are currently hiring for a Process Engineer and will like to invite suitable candidates to send your detailed resume to [email protected]

Process Engineer

Responsibilities:

• Define and Document Equipment process requirement and specification.
• Perform Process characterization to optimize critical process paths in order to meet equipment specification.
• Review, simplify and optimize Internal Buy Off specification for equipment together with Quality Assurance Department.
• Participate in continuous process improvement activities to enhance Equipment capability.
• Support Equipment manufacturing activities by helping to trouble-shoot and resolve process-related issues
• Support other internal departments to handle customers’ process related issues and recommend technical solutions
• Perform data analysis using statistical techniques and conduct process capability studies
• Transfer process knowledge to in house Engineers and Technicians to ensure optimal equipment performance.
• Equipment UPH projection calculation base on specific process parameter.

Requirements:

• Degree in Production / Mechanical / Material Science Engineering
• At least 3 years experience in an equipment manufacturing environment with a process engineering and background
• Strong interest in the development of new manufacturing processes
• Experience in process design and control in the area of laser marking process.
• Knowledge in Material Science will be added advantage.
• Knowledge in cycle time calculation.
• Trained in SPC, DOE and other statistical tools

The research and development engineer will focus on scaling up and optimizing the solution-based perovskite solar module fabrication.

Key Responsibilities are listed as following:

• Material Development: Formulate and optimize perovskite precursor solutions to achieve high-performance thin films with excellent uniformity, crystallinity, and stability.
• Process Optimization: Develop and refine large area solution-based deposition techniques such as slot-die coating, inkjet printing, and blade coating for scalable production.
• Device Fabrication: Design and fabricate perovskite solar cells, including single-junction and tandem architectures, using solution-based processes.
• Characterization: Perform advanced characterization of solution-processed materials and devices, including optical, electrical, and structural analysis using techniques like UV-Vis spectroscopy, SEM, XRD, PL, and IV testing.
• Stability and Reliability: Investigate degradation mechanisms of solution-processed perovskite layers and develop strategies for improving device stability and reliability under operational conditions.
• Innovation: Explore new solvents, additives, and processing conditions to enhance performance and scalability of solution-based perovskite materials.
• Collaboration: Work closely with cross-functional teams, including material scientists, device engineers, and manufacturing teams, to align research outcomes with production goals.
• Documentation and Reporting: Maintain detailed records of experiments, analyze results, and prepare technical reports, presentations, and publications.

Qualifications:

· Bachelor or Master’s in Materials Science, Chemistry, Chemical Engineering, Physics, or a related field.

· Demonstrated expertise in solution-based perovskite synthesis, thin-film deposition, and device fabrication.

· Experience with solution processing techniques, such as spin coating, slot-die coating, or inkjet printing.

· Experience with drying processing techniques, air-knifing, VCD and oven annealing.

· Proficiency in materials and device characterization techniques, including SEM, XRD, UV-Vis, and IV measurement.

· Strong understanding of perovskite chemistry and degradation mechanisms.

· Excellent analytical, problem-solving, and critical-thinking skills.

· Ability to work independently and collaboratively in a fast-paced research environment.

Preferred Skills:

• Familiarity with large-area coating processes for scalable production.
• Experience in tandem solar cells or integration with other photovoltaic technologies.
• Knowledge of industrial-scale solution processing methods like roll-to-roll fabrication.
• Proficiency in simulation tools for solar cell design and analysis.

• Developed new PHA procedure, integrating simplified LOPA to HAZOP methodology to address Safety Case Gap 1 – Adequacy of Barriers, and allow risk decisions to be made faster, defensible and consistent.
• Established the Risk Tolerance Criteria, which is a prerequisite to LOPA, to enable company to focus the limited resources on the most critical safeguards.
• Established the Safety Indicator program to track process safety performance by monitoring leading and lagging indicators.
• Developed the Safety & Quality Culture Matrix to establish a set of desirable and undesirable behaviors in the company for each organization level, to enhance self-awareness and adoption of the desired behaviors.
• Played a pivotal role in obtaining recertification of ISO 14001 & 45001 and successful conversion to SS 651 in 2020 with zero non-conformities.
• Re-designing the MOC system to combine with the PSSR program to have a fully integrated approach, and migration to an electronic system. (in-progress).
• Establishing the Functional Safety Management system from scratch (in progress).

Job Scope

• Designing, implementing and optimising semiconductor manufacturing processes
• Troubleshooting process issues and identifying areas for improvement
• Collaborating with cross-functional teams to drive continuous process enhancements
• Conducting performance testing and data analysis to support process qualification
• Ensuring compliance with industry regulations and internal quality standards
• Providing technical guidance and mentoring to more junior members of the team

Requirements

• Degree in Engineering, with a specialisation in Process Engineering or a related field
• 2+ years of experience in a process engineering role within the semiconductor industry
• Proven track record of designing, implementing and optimising complex manufacturing processes
• Excellent problem-solving and analytical skills, with the ability to interpret technical data
• Strong communication and collaboration skills to work effectively with cross-functional teams
• Demonstrated experience in applying lean manufacturing principles and Six Sigma methodologies
• Familiarity with relevant industry standards and regulatory requirements

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected].

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Scope

• Designing, implementing and optimising semiconductor manufacturing processes
• Troubleshooting process issues and identifying areas for improvement
• Collaborating with cross-functional teams to drive continuous process enhancements
• Conducting performance testing and data analysis to support process qualification
• Ensuring compliance with industry regulations and internal quality standards
• Providing technical guidance and mentoring to more junior members of the team

Requirements

• Degree in Engineering, with a specialisation in Process Engineering or a related field
• 2+ years of experience in a process engineering role within the semiconductor industry
• Proven track record of designing, implementing and optimising complex manufacturing processes
• Excellent problem-solving and analytical skills, with the ability to interpret technical data
• Strong communication and collaboration skills to work effectively with cross-functional teams
• Demonstrated experience in applying lean manufacturing principles and Six Sigma methodologies
• Familiarity with relevant industry standards and regulatory requirements

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected].

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Reporting to the Manager, Engineering, the Process Engineer will provide technical guidance on packaging-related customer complaints, deviations and investigations, as well as develop and participates in continuous process improvement activities to enhance packaging performance metrics. In collaboration with functional groups, will support the introduction of new products/market to the packaging operation as well as qualify new components and equipment capabilities.

WHAT YOU WILL DO

Critical responsibilities but not limited to:

• Investigating packaging customer complaints and authoring customer complaint reports
• Supports routine supply manufacture by providing on going technical support and implementing opportunities for improvement utilizing the lean six sigma tools.
• Support new product introductions to the site by assisting with machinability and qualification activities and training of technicians as required.
• Support introduction of new components/sources by assisting with machinability and qualification activities and training of technicians as required.
• Supports filing activities by developing and supporting qualification activities for equipment, process and material changes.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• Bachelors or Masters in a technical field, including Chemical or Mechanical Engineering, Chemistry or Pharmaceutical Sciences
• Minimum 3 years technical experience preferably in manufacturing, oil and gas or semiconductor industries

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future

This position reports to the Vice President of Automation Manufacturing Technology (AMT), Integrated Operations Network (ION), and is responsible for effectively leading the collaboration with business units across TE to achieve productivity and gross margin improvement that are aligned with TE strategy. The successful candidate is responsible for developing and executing the AI strategy to integrate and optimize the inhouse and external resources by influences. The person in this position must charter a strong AI related talent network among business units and AMT on transforming innovation practices into robust application processes with scaling up implementations. This role will leverage the leader’s experience in AI, manufacturing, assembly, and general management to build a strong network and increase the competitiveness in AI related advanced assembly, automation, and manufacturing technologies for TE.

This is an extremely hands-on role that provides the candidate with opportunity to join a high performing organization and highly visible development opportunities for future operation and manufacturing leadership within TE. The position will locate in TE Singapore AI Hub campus and will serve customers from multiple business units and manufacturing sites globally.

Responsibilities:

• Identify AI opportunities with multiple BU customers to facilitate their strategy of accelerating the short-term and long-term AI related roadmap on assembly and automation manufacturing.
• Develop and innovate AI related strategies for the transformational collaboration with BU customer to drive TE operational excellence through end-to-end approach from effective innovation, application, and scaling up implementation. Align the strategy with BU customer’s current to 5-year strategic roadmaps and make recommendation on the AMT prioritizations.
• Develop a high-performance AI internal and external teams with productivity and quality mindset, optimize the inhouse and external/educational AI resources to engage with global customers with cross-functional programs and provide subject matter expertise and industry best practices related to manufacturing operation.
• Provide critical thinking and influence by contributing with AI related platforming and implementation of innovative solutions addressing the most challenge assembly and automation processes.
• Oversee and provide directions to AMT global AI projects with support to make sure they are meeting customer requirement on time, on performance, and on budget.
• Partner with the other AMT leaders to develop AI related strategic partnership with suppliers to meet global business needs, and to drive the supplier improvement plans with quality, delivery, and cost requirement.
• Partner with the AMT leaders, BU operation leaders and central operation functions to develop AI talents inside the organization, building AI automation and assembly talents competency for the company for sustainable growth.
• Drive continuous improvement culture change through collaboration and communication regarding AI related best practices knowledge sharing, internal and external benchmarking, talent development, and hands-on leadership.
• Promote a culture that reflects company’s values, encourages outstanding performance, and promotes positive work environment, encouraging inclusion and diversity to develop, coach, and mentor individuals in the team to fully unleash their potentials.
• Develop and maintain programs and policies to ensure a highly effective and motivated workforce; evaluate training needs and develop training and development plans to support high-performance teams.

Requirements:

• A Master degree in an Engineering or Technical discipline. A PhD engineering degree is strongly preferred. 10+ years operational and/or technical experiences in a technology environment/industry is also preferred.
• A strong leader with clearly demonstrated AI experience and a track record of AI innovating as well as AI deploying/scaling up new technologies via influence in matrix organizations. Understanding key SPAM process in TE is preferred. Experiences in chartering company-wide AI technology events with solid tangible results are strongly preferred.
• Capacity to make balanced decisions in best interest of the business and company with respect to people, investments, and total cost of ownership.
• Record of proven results in driving organization integration and innovating process for benchmarking and sharing best practices.
• Proven records of collaborating with multiple manufacturing/engineering teams and BU customers to develop strategy and execute AI and related projects with multi-years roadmap for productivity and growth margin improvement.
• Experienced in matrix management with a track record of being able to manage by influence and coordinate cross business unit activities.
• Ability to lead multi-cultural team members, helping them grow to be stronger and more effective.
• Demonstrated track record of taking initiatives, working in a fast-paced environment, and handling multiple priorities simultaneously.
• Passionate, resilient leader with experience leading change.
• Strong business acumen and customer orientation.
• Working knowledge of AI, P&L, cost saving strategies, and budget balances.
• Excellent communication and coaching skills at all levels from the shop floor to top management.
• Willingness to travel frequently, and as necessary, to support a global technology deployment in all regions.
• Strong global industrial experiences with time spent working and living abroad is desired.

Personal characteristics of the individual:

• High-powered individual with a persuasive leadership style and motivating management skills.
• Experienced transformational growth leader with a passion for AI automation and an inventive curiosity.
• High level of initiative and drive with a strong sense of urgency and accountability. Energetic, proactive, and hardworking to lead by example.
• Strong communications skills. Must demonstrate an open, honest, and transparent communication style with excellent interpersonal skills. Ability to explain complex topics concisely to a non-technical audience.
• Excellent judgment and experiences in an environment which requires emotional maturity, politically savvy, and the personal ability to interact with all types of personnel at various levels.
• Keen business judgment demands excellence and sets high standards for self and others. High-level of intellectual curiosity combined with strong problem-solving and analytical skills.
• Willingness and personal style to be a team player and foster a team environment, with the capacity and aptitude to serve as a leader in motivating and inspiring others.
• Impeccable ethics and integrity.

Responsibilities:

Carry out activities to addresss & resolve Non-Quality Events (NQEs)

Monitors & carry out activities to resolve NQEs at various product / production lines

• Monitors & records NQEs from the production line
• Reviews, analyses & validates NQE contents
• Executes immediate containment actions for NQE e.g., hold lot in Manufacturing Execution System (MES), etc.
• Prepares and consolidates quality issue review topics (to share on the progress of follow ups on NQEs / MRBs) prior to daily meeting with Yield Dept
• Prepares information package required for MRB (e.g. event chronology, preliminary investigation and analysis results, etc.); Facilitates MRB meetings
• Records, follow ups and reports Quality Engineering activities (e.g. NQE, MRB, etc.) on Quality Activities Tracker

Issues & drives 8Ds for NQE issues

Monitor product thru Quality Gate

Applies Quality Gate (QG)

• Monitors & records QGs results from the production line
• Performs lab analysis (e.g., SEM / EDX) on QG failed parts
• Participates in task forces (defect analysis, risk assessments)

Following the detection of QG failed lots, proposes short-term actions to ensure integrity of the quality of products and / or processes (i.e., equipment shutdown, etc.)

Others

Data Analysis: Pulls, plots capability & trend and analyses data from JMP & Klarity

Reports: Updates & presents various Quality Engineering reports & KPIs

Others: Performs audits and other tasks as may be assigned

Requirements:

Educational Qualifications :

Diploma – Minimum 2 years of relevant experience in a manufacturing environment

Higher NITEC – Minimum 3 years relevant experience

NITEC – Minimum 6 years relevant experience

Technical / job knowledge :

• Knowledge in Quality tools and methods (SPC/MSA/FMEA, Problem-Solving & Audit skills) is an advantage
• Knowedge in statistical tools (e.g. JMP, Klarity, etc.) is an added advantage
• Knowledge and skills in lab (SEM/EDX, etc.) is an added advantage
• Knowledge of semiconductor products & manufacturing processes

Personal capabilities :

• Meticulous and with a sense of initiative, responsibility & urgency
• Team player with positive attitude and willingness to learn

Others :

• Able to work on normal swing shift (Sunday - Thurs), 8.30am to 6pm