As a Senior Project Engineer, your main responsibility is to lead, supervise, execute and coordinate project activities together with a group of Engineers, Technicians and sub-contractors leading to successful project completion. You will monitor and control projects on schedule, within budgeted cost and quality and safety standards. You will also work closely with the consultant/owner to ensure the project is delivered according to requirements. As a senior, you are also required to perform system programming and troubleshooting during project implementation.

You should possess a Diploma/Higher Nitec in Electrical and/or Electronics in any Engineering related courses, with 3-5 years’ experience in site supervision and coordination with owner, main contractors, and subcontractors, must have experience in alarm, card access and CCTV system installation knowledge. Must be computer literate and knowledge of Risk Management.

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Key Responsibilities:

• Support the implementation and contribute to the continuous improvement of Safety, Quality, Environment, and Health Management Systems, including but not limited to SS506 Part 3, ISO 9001, ISO 14001, OHSAS 18001, and IATF 16949.
• Act responsibly to ensure the safety of oneself and others who may be affected by actions or omissions at work, as per legal obligations.
• Assist management in mitigating Major Accident Hazards to As Low As Reasonably Practicable (ALARP) levels and escalate concerns when necessary.
• Ensure adherence to Customer Specific Requirements (CSR) in all operational processes.

Requirements:

• Strong knowledge in chemical engineering, mechanical engineering, and/or polymer science.
• Experience in process safety management, quantitative risk assessments (e.g., Layer of Protection Analysis - LOPA), or safety case preparation is an advantage.
• SCEM certification or possession of a Steam Engineer/Boiler Attendant certificate is preferred.
• Working knowledge of ISO9001, ISO14001, SS506-Part 3 standards, cost control practices, and relevant regulations.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities:

• Develop and draft process improvement initiatives to enhance occupational safety, product quality, energy efficiency, production capacity, and cost-effectiveness.
• Implement process improvement projects using the Management of Change system and/or Non-Regular Work system.
• Collaborate with R&D and Operations teams to coordinate, plan, and execute new grade trial runs, including overseeing trial operations and evaluations.
• Monitor process performance and key parameters to identify and mitigate risks that may impact plant stability, safety, or product quality.
• Provide technical support in troubleshooting process-related issues, conducting root cause analyses, and recommending corrective and preventive actions.
• Contribute to the preparation and implementation of safety and quality standards by participating in relevant studies such as HAZOP and FMEA.

Requirements:

• Singapore Certified Energy Manager qualification is preferred.
• Familiarity with the Safety Case Regime is essential.
• Knowledge of IATF 16949 standards is preferred.
• Understanding of ISO9001, ISO14001, ISO45001, and SS651 standards.
• Familiarity with IEC 61511 standards is an advantage.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Responsibilities:

1. Project and Maintenance Support:
   • Participate in projects and maintenance services involving CCTV systems, access control systems, public address systems, alarm systems, and server/network infrastructure.
   • Provide technical assistance and support as required.
2. System Installation and Configuration:
   • Install, implement, configure, and test system/storage equipment and related setups.
   • Set up and integrate access control systems, including electronic locks, card readers, biometric scanners, and control panels.
3. Preventive Maintenance and Inspections:
   • Conduct routine inspections of access control systems.
   • Perform preventive maintenance to ensure optimal system performance and reliability.

Requirements:

• Proficiency in installing and configuring electronic security systems.
• Strong understanding of server and network infrastructure.
• Excellent troubleshooting and problem-solving skills.
• Ability to work independently and in a team-oriented environment.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Duties

• Reports to Project Manager.
• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Lead a group of supervisors and ensure site progress is on schedule.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• Provide technical guidance during project design and construction phases,resolving technical issues promptly and effectively.
• Support the management of manpower, materials, and equipment to optimize productivity and efficiency.

Requirements

• Recognized Degree in Civil / Structural Engineering or equivalent. PE Board recognized degree is preferred.
• At least 6 years’ experience in building or civil engineering project for senior role.
• Minimum 2 complete cycle (piling to roof) for HDB projects.
• Experience in architectural works will be an advantage.
• Technical competence.
• Knowledge in BIM/VDC is an advantage.
• Positive attitude and good team player.
• Demonstrates a sense of urgency.

Job Responsibilities

• To support the construction team for M&E engineering works.
• Planning/scheduling and coordination of M&E works.
• Project coordination, supervision, and monitoring of the progress of site work.
• Coordinate M&E engineering work and work closely with other department staff to resolve site discrepancies and technical issues.
• Oversee and ensure works are carried out in accordance with the approved drawings, materials and method statements.
• Ensure quality work in order to achieve CONQUAS and/or QM requirements
• Liaise with clients, consultants, relevant authorities, and sub-contractors on M&E issues.
• Handle any other ad-hoc duties and tasks assigned.

Requirements

• Degree in Mechanical & Electrical Engineering or related fields. PE Board recognized degree is preferred
• Minimum 8 years of relevant experience in the construction industry
• Proficient in Autodesk Revit or BIM software

Job Duties

• Reports to Project Manager.
• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programs.
• Liaise with Consultants on technical issues and coordinate the site activities with subcontractors.
• Lead a group of supervisors and ensure site progress is on schedule.
• Maintain quality standards and carry out site inspections.
• Ensure compliance with EHS requirements, regulations, and best practices throughout the project lifecycle.
• Provide technical guidance during project design and construction phases,resolving technical issues promptly and effectively.
• Support the management of manpower, materials, and equipment to optimize productivity and efficiency.

Requirements

• Recognized Degree in Civil / Structural Engineering or equivalent. PE Board recognized degree is preferred.
• At least 6 years’ experience in building or civil engineering project for senior role.
• Minimum 2 complete cycle (piling to roof) for HDB projects.
• Experience in architectural works will be an advantage.
• Technical competence.
• Knowledge in BIM/VDC is an advantage.
• Positive attitude and good team player.
• Demonstrates a sense of urgency.

Find Your Dream Job with Us

WE ARE HIRING!! Apply now and make a difference.

Role: OpenShift Container Platform Engineer

Job Requisition Number: JR45643

Job Level: More than 10 years of relevant experience (L4)

Location: Singapore

Job Objectives

Group Technology and Operations (GTO) provides software and system development, information technology support services and banking operations.

We have centralized and standardized the technology components into Singapore, creating a global footprint which can be utilized for supporting our regional subsidiaries and the branches around the world. We operate and support 19 countries with this architecture to provide a secure and flexible banking infrastructure.

Our operations divisions provide transactional customer services for our businesses while also focusing on cost efficiency through process improvements, automation and straight through processing

Key Responsibilities

· Design, implement, and configure OpenShift clusters and containerized applications

· Develop and maintain technical documentation related to design, configuration, usage, troubleshooting, backup, recovery, etc., for all OCP environments

· Provide Technical assessment and advisory in relation to design, installation, configuration, including system upgrade and migration of OCP environment, including the operators for OCP

· Collaborate with development teams to onboard and optimize applications on the OpenShift platform

· Implement best practices for containerization, orchestration, and automation using OpenShift

· Troubleshoot Red Hat OCP configuration and services and container issues, working in collaboration with other relevant IT areas and vendor support towards a quick and effective resolution

· Work on container security solutions and ensure compliance with security policies

· Manage OpenShift clusters for performance, availability, and capacity planning

· Perform assessments and health checks of existing solutions and provide best practice recommendation and guidance to Support team.

· Automate deployment process

Key Requirements:

· Minimum 10 years of practical experience in the implementation of OpenShift/Kubernetes environments

· Expertise with the RedHat OpenShift Container Platform/Kubernetes.

· Experience in dealing with container configuration management, especially Helm and app-of-apps concepts.

· Experience working with infrastructure as code technologies such as Ansible, Terraform.

· Knowledge of application development, Java Spring Boot.

· Experience in CI/CD Pipeline.

Technical Skills:

· Containerization, Linux administration, Virtualization, Networking, and Security

· Providing first class level 3 support

· Java Spring Boot, Helm, OpenShift, Kubernetes

Please forward your resume in MS word format to [email protected] and

[email protected]

Please refer to your friends for any IT openings as we have various positions.

Please do not send PDF Format Resume. Send the following details

1. Notice period

2. Current Salary

3. Expected Salary

4. Visa Status in Singapore

5. Current Location

Job Descriptions:

• Ensure an ample supply of ingredients and supplies for the restaurant.
• Negotiate with suppliers regarding prices, delivery times, and other procurement conditions.
• Ensure the compliance of the procurement process, following the company's procurement policies and procedures.
• Develop and execute effective procurement plans to meet the daily operational needs of the restaurant.
• Supervise inventory levels, ensuring reasonable stock and timely replenishment.
• Coordinate with other departments to understand the restaurant's ingredient requirements and make timely procurement decisions accordingly.
• Ensure the quality of purchased materials meets company standards and hygiene regulations.
• Handle issues and disputes with suppliers, ensuring a smooth supply chain.
• Assist in budget formulation, control procurement costs, and provide advice on cost-effectiveness. Collaborate with the team to ensure the continuous improvement of food quality and service levels in the restaurant.
• Any Adhoc task by General Manager.

Requirements:

• Preference given to candidates with experience in procurement in the food and beverage or related industries.
• Excellent communication and negotiation skills.
• Keen insight into market trends and ingredient quality.
• Familiarity with food safety and hygiene standards.
• Strong teamwork skills, able to collaborate closely with different departments.
• Good problem-solving and adaptability skills.
• Basic understanding of numbers and data analysis.
• Experience in formulating procurement plans and managing the supply chain.
• Experience with the Restoke app will be advantage.

Fill up the application form：

https://masteraccount.typeform.com/to/m2SYkr2w

ABOUT US

LawNet Technology Services (LTS) is the technology company behind LawNet, Singapore’s leading portal for legal research, information and transactions. An indispensable tool for the legal community since 1990, LawNet is subscribed by a majority of Singapore lawyers and is also accessible by anyone outside the profession. Users can conduct research on Singapore primary legal materials (Singapore Law Reports, unreported judgments and legislation) and secondary materials (such as Parliamentary reports, legal news, textbooks and journals). LawNet continues to enhance its services and content while maintaining its affordable and highly competitive subscription rates, making it an essential resource for the legal community.

LTS is a wholly owned subsidiary of the Singapore Academy of Law (SAL), a promotion and development agency for Singapore’s legal industry. In addition to running LawNet, LTS manages the technology driving SAL’s support services for Singapore’s legal industry and statutory functions such as stakeholding services and appointment of Senior Counsel, Commissioners for Oaths and Notaries Public.

Led by a Board of Directors who understands both the capabilities of technology and the needs of the legal profession, LTS continues to develop bold and innovative products and services that will better serve the needs of the legal community.

POSITION
NLP Engineer

REPORTING STRUCTURE

The NLP Engineer will report to the Senior AI Solutions Architect of LawNet Technology Services (LTS).

ABOUT THE ROLE
As an NLP Engineer at LTS, you will play a crucial role in developing and enhancing our AI-driven products and services. We're seeking a skilled Data/NLP Engineer to join our team to develop and drive a data strategy to optimise model performance and manage the data pipelines for training and evaluating our custom LLMs.

RESPONSIBILITIES

• Work closely with domain experts to understand data sources, formats and structure.
• Collaborate with Machine Learning Engineers and MLOps Engineers to understand data requirements for LLM training and inference.
• Engage in data engineering tasks, including data collection, preprocessing, quality control and augmentation to ensure high-quality datasets for model training.
• Develop from scratch and fine-tune both traditional NLP and LLM models on LTS cloud infrastructure, optimizing for safety and performance (measurable via benchmarks)
• Collaborate with domain experts and carry out independent research to optimise and develop product evaluation suites to measure model and product performance.
• Explore and implement techniques for mitigating bias and ensuring fairness within the training data for the LLM.
• Lead in the development and implementation of strategies for data augmentation improve LLM performance.
• Collaborate with AI and MLOps Engineers to integrate NLP models into automated pipelines.
• Stay abreast of the latest NLP techniques and methodologies, experimenting with new models and approaches to maintain our competitive edge.
• Conduct rigorous testing and validation of NLP models to ensure robustness and reliability.
• Document and present model development processes, results, and insights to both technical and non-technical stakeholders.

SKILLS & QUALIFICATIONS

• Bachelor’s or Master’s degree in Computer Science, Artificial Intelligence, Linguistics, or a related field.
• Proven experience in NLP or related areas, with a strong portfolio of projects demonstrating expertise in data engineering and model training/finetuning.
• Solid understanding of machine learning algorithms, language modeling, and their applications.
• Proficiency in programming languages such as Python, and experience with NLP libraries (e.g., NLTK, spaCy, Hugging Face).
• Experience with cloud computing platforms and services, and the ability to deploy and manage large models in a cloud environment.
• Strong problem-solving skills, with a creative and analytical approach to tackling complex challenges.
• Excellent communication and collaboration skills, with the ability to work effectively in a team environment.

The level of offer and appointment designation will commensurate with applicants’ relevant experience and track records. Successful candidate will be offered a 2-year contract in the first instance.

Please provide your resume, including details of your currently monthly salary, total annual compensation package, and salary expectations.

Job Description and Qualifications for a Engineer in the Petrochemical Industry

A Engineer in the petrochemical industry at Jurong Island plays a crucial role in overseeing engineering activities at the site. Here is a job description and qualifications typically required for this role:

Job Description:

1. Technical Oversight: Provide technical expertise and support, resolve drawing discrepancies & technical difficulties with technical team and ensure preparation of detailed method statements and work instructions for scheduled job are done. Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

2. Project Management: Manage engineering projects, including planning, scheduling, and budgeting to ensure projects are completed on time and within budget.

3. Safety Compliance: Ensure strict adherence to safety regulations and protocols of the job site to maintain a safe working environment.

4. Quality Control: Oversee quality control procedures to maintain high standards of construction and operation.

5. Team Collaboration: Work closely with multidisciplinary teams, including chemical engineers, mechanical engineers, and technicians. Coordinates between sub-contractors/vendors/stakeholders and monitor site manpower / material / equipment demands to meet schedules. Liaise with the owners and consultants on the submission related to structural works, project, maintenance works, electrical works and Technical Department.

6. Problem Solving: Identify and troubleshoot engineering issues, offering effective solutions.

7. Documentation: Prepare technical reports, documentation, and progress reports.

8. Supervision: Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.

• Full time supervision at site
• Able to communicate and team work
• Other Ad-Hoc related duties assigned by the company

Qualifications:

1. Education: A Bachelor's Degree in Engineering or a related field is typically required

2. Experience: 10 years of experience as a Engineer or similar job role in the electrical Engineering industry or Mechanical cum steel structural work and maintenace works.

3. Technical Skills: Technical expertise and knowledge in mechanical cum steel structural works , electrical , maintenance works , M& E engineering. Proficient in Microsoft Project and Good knowledge on method statements, Autocads drawing –piping isometric and etc

4. Communication Skills: Effective communication and teamwork are crucial for collaborating with various teams and stakeholders.

5. Project Management: Project management skills are valuable for overseeing engineering projects effectively.

6. Safety Awareness: A strong commitment to safety and the ability to ensure compliance with safety standards is essential.

• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team / department.
• Ensuring that the site works are completed with high quality standards and adhering to safety requirements throughout the project or maintenance works.

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

This position is responsible for fulfilling the purchasing requirements for SembWaste and Sembcorp Environment Energy from Waste Plant, and spend categories includes Vehicle and Equipment Maintenance.

Key Roles and Responsibilities

Business Partnering

• Actively engaging business stakeholders, translate business requirements to sourcing strategies to deliver business requirements.
• Understand business priorities and guide stakeholders to propose and execute the operational strategies with consideration to risk mitigation and governance.
• Work with business stakeholders to provide support to drive compliance to Sembcorp policies.

Sourcing & Contract Management

• Perform Source to Contract process, lead and perform negotiations with suppliers.
• Leading RFx creation/management, market research/analysis, data collection/analysis, and contract management (cost, terms and conditions, SOWs, MSAs, etc.).

Supplier Management

• Conduct Supplier Performance Evaluation and establish Preferred Supplier List jointly with business stakeholders by relationship management so as to deliver maximum productivity benefits.

Cost Management

• Ability to analyze total cost of acquisitions/ownership and provide optimum value to business. Deliver cost saving goals, delivering value beyond savings.

Business Process improvement

• Ability to work with business to drive efficiency and effectiveness in the process.

Admin Support

• Provide advice to internal stakeholders on all procurement-related matters and ensure they are compliant with Group Procurement Policy.
• Perform vendor screening, supply market research and analytical studies to identify and select potential suppliers to be added to the pre-approved vendor list.
• Ensure all supporting documents are in place prior to creation of Purchase Requisitions in SAP system.
• Support periodic reporting to track historical procurement data for consolidation and improvement.
• Any other duties assigned by Manager.

Required Competencies

• Diploma / Degree holder with minimum 4 to 6 years’ of procurement experience.
• Proficient in using Microsoft Office suite of products.
• Demonstrate ability to work in a cross-cultural setting, and to be able to manage stress and time to deliver results.
• A strong team player and able to work independently with minimum supervision. Passion for business partnering.
• Organized and meticulous with good interpersonal and communication skills.
• May be required to travel to Jurong Island

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

• Apply assembly of mechanical machines.
• Carry out advanced spreadsheet functions.
• Carry out engineering simulation to verify design.
• Carry out inspection of protective coating.
• Carry out the process of mixing materials.
• Decide heat transfer loads for processing equipment.
• Define the measurements of the design and its allowance.
• Oversee manufacturing work for Workplace Safety and Health (WSH).
• Plan and build the industrial machine electrical system.
• Plan mechanism unit of machine.
• Use automation control for machines.
• Use laser machine technology.
• Use materials characterisation.
• Use measurement metrology in quality assurance.
• Use mechanical fixtures design.
• Use polymer materials technology.
• Use precision machining.
• Use root cause analysis.
• Use sensors and actuators in automation.
• Use vibration design and control for precision engineering.

Point of contact with customer

Coordination with sub con and suppliers

Proficient in paper work preparation for each project

Familiar with Safety requirements and regulations

Develop project schedule, track timeline

Good disposition, able to handle stress

Resourceful and creative

Responsive and fast

Speak and write good english

Experience in CCTV, Access Control is advantage

SENIOR MGR, PROCUREMENT & ADMIN

• Plan and manage all procurement activities conducted by the User Divisions to ensure timeliness of procurement and contract implementation
• Provide professional advice to Divisions on best practices in sourcing, contract management and supplier management practices and manage inquiries from users
• Develop and maintain the company's procurement governance framework, striking an optimal balance between governance and operations efficiency
• Lead and mentor the procurement team, promoting a culture of continuous improvement and innovation
• Lead the new procurement system implementation
• Manage the entire procurement process
• Review internal Corporate Services SOPs, templates to support digitalisation and streamline processes
• Establish and maintain a process and system of archival, organization, retrieval and disposal of records to support needs of HSG and compliance with internal policies
• Participate in ad hoc projects as assigned

Job requirements

• Tertiary degree in Business, Accountancy or Finance
• Minimum 5 years of procurement experience in statutory boards or ministries
• A good understanding of Government Procurement Policies will be advantageous.
• Familiar with Tenderboard system or Oracle.
• Committed with good working attitude and resilience to produce the desired results.
• Effective stakeholder management, independent, good communication and interpersonal skills.
• Has a growth mindset in seeking continual improvements and keeping up with digital transformation that leads to significantly better and cost-effective outcomes.
• Good team player and meticulous with numbers.
• Independent and self-driven with the ability to multi-task in a dynamic and fast-paced environment and perform under pressure.

The Procurement Executive is responsible for managing the end-to-end procurement process for medical instruments, devices, consumables, and other supplies. This role involves daily procurement operations, strategic negotiations, inventory management, and ensuring compliance with regulatory requirements across all surgery centers and the corporate office.

Key Responsibilities:

•

Oversee the entire procurement cycle, including evaluating and comparing medical instruments, devices, and consumables.

•

Manage daily operational procurement activities for surgery centers and the corporate office.

•

Negotiate quotations and purchasing contracts to achieve cost savings and favorable terms.

•

Maintain records of requisitions, secure CEO approval, and process purchase requisitions accordingly.

•

Build and sustain strong relationships with suppliers to optimize procurement effectiveness.

•

Identify and implement actions to improve efficiencies or reduce operational costs.

•

Ensure strict compliance with procurement policies, procedures, and regulatory requirements (e.g., MOH guidelines).

•

Independently handle assigned procurement activities.

•

Manage and monitor stock inventory, including inter-department transfers.

•

Verify purchased items and update the inventory system accurately.

•

Generate purchase requisitions/orders within the system and manage invoice accuracy against quotations prior to payment processing.

•

Collaborate effectively with internal teams to address procurement needs and requests.

•

Lead the annual stock inventory audit in collaboration with the nursing team.

Job Requirements:

•

Diploma or Degree with at least 2 years of relevant experience in healthcare procurement.

•

Familiarity with stock inventory management systems (e.g., SCMS) is a plus.

•

Proficiency in MS Office Suite (Word, Excel, Outlook).

•

Strong negotiation and influencing skills, with an ability to secure favorable terms.

•

Excellent interpersonal and communication abilities.

•

Proactive, self-motivated, and capable of working independently.

•

Team-oriented with a collaborative mindset and commitment to supporting team goals

How To Apply:

Please submit your LATEST resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current/Last remuneration

- Expected remuneration

- Notice period

We regret that only shortlisted candidates will be notified.

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

Key Responsibilities:

· Install and mount equipment in data center racks, including servers, network switches, routers, and firewalls.

· Replace components in existing equipment, such as server motherboards, GPUs, CPUs, RAM, HDD/SSDs, network line cards/modules, transceivers, and cables.

· Perform fiber optic and Ethernet cable patching within racks, ensuring all connections are correctly made to designated ports and interfaces.

· Prepare servers for operation, including operating system installation, basic network and firewall configuration, and application deployment.

· Conduct operational and maintenance tasks such as cable testing, equipment power cycling, and setting up console interfaces for remote access.

· Troubleshoot issues using tools and techniques like ping, traceroute, hardware diagnostics, and generating hardware logs for escalation to vendors.

· Manage site inventory, ensuring all assets are accurately tracked and recorded.

Qualifications and Skills:

· A minimum of one year of hands-on experience in a data center environment.

· Prior experience in building or maintaining data center network systems is highly desirable.

· Strong understanding of computer networks, including familiarity with equipment from leading manufacturers such as switches, routers, and firewalls.

· Basic knowledge of operating systems, particularly Linux.

· Fundamental understanding of hardware, including servers, switches, KVMs, hard drives, and memory components.

· Excellent communication and coordination skills, with a strong sense of responsibility, dedication, problem-solving capabilities, and organizational planning.

Language Requirements:

· Fluency in English is mandatory, and Mandarin is a plus.

NATURE & SCOPE:

Project Engineerwill be responsible for managing the document control system for the MOPU’s, FSO’s and preparing technical proposals and specifications.

Assist the Technical Team in reviewing and preparing Technical Evaluations.

The candidate is expected to have sufficient technical knowledge and experience to ensure that technical and administrative tasks are completed in a timely manner.

This is a local position for Singaporean or Singaporean PR.

PURPOSE OF JOB:

This position is to assist the technical team in managing document control for the MOPU’s (Production Rigs), FSO’s, Flag and Class Certifications, Insurance Certificates.

The position will assist in preparing technical requirements, liase with contractors and suppliers, review invoices and purchase orders and requests.

RELATIONSHIPS

EXTERNAL:

External Vendors/ Contractors/ Agents

INTERNAL: Technical Team/MOPU OIM’s/ Production/Facilities/ Procurement/Finance

NUMBER OF SUBORDINATES: None

MAJOR RESPONSIBILITIES AND DUTIES:

1. Manages Document Control System

2. Supports technical and engineering personnel with project support duties.

3. Compiles technical reports.

4. Provides input to technical reports, project planning, etc.

5. Produces accurate statistics, relevant figures, etc.

6. Undertakes data analysis, identifies and investigates variations.

7. Prepares technical drawings, datasheets and documents under the direction of the Technical Lead.

8. Develops and maintains technical databases and spreadsheets.

9. Sources technical documents, information and drawings.

Critical Skills:

1) Core Technical Experience

a) Previous relevant industry experience in Engineering and Project Management

b) Excellent skills with Microsoft Office applications

c) Advanced use of e.g. Microsoft Office, Excel, PowerPoint, Word, MS Project.

d) High level of accuracy and attention to detail.

e) Minimum 3-5 years of experience.

2) Qualifications

a) Good general level of education; with good standard of numeracy and literacy required.

3) Personal Characteristics

a) Proactive approach

b) Ability to anticipate

c) High degree of resourcefulness

d) Ability to work on own initiative and self-check work

e) Comfortable working to deadlines

f) Good communication & presentation skills

4) Other Requirements

a) Working across all levels of the workforce

b) The incumbent requires to be able to meet reporting deadlines and conduct work of a detailed nature in an accurate manner

MAGNITUDE MEASURES: (annual revenues or operating income, budget, value added, purchases, sales, fees, premiums, interest)

The position has no expenditure authority.

LEVEL OF AUTONOMY

The position has a ‘medium’ level of autonomy. The job holders are expected to be able to manage themselves and not require approval from the Fleet Director on how tasks should be performed.

Location: Singapore

Job Descriptions:

• Manage and work with project team to assigned project(s).
• Perform engineering duties such as engineering calculations, planning, tender, estimates, costing, taking off measurement. Preparation/Evaluations as part of the engineering project team.
• Prepare tender document and tender drawings for tender.
• Design and engineering of Mechanical and Electrical Services for Building Services.
• Liaise and coordinate with architect, other consultants, owners and contractors in development and implementation of the project until completion.
• Liaison with clients, project managers, consultants, contractors, and other stakeholders who are handling the project matters.
• Attending site progress meeting and site technical issues.
• Work with other engineers and designers to complete assigned work within deadlines.
• Conduct testing and commissioning of Mechanical and Electrical System.
• Ensure compliance with ISO Quality Procedure and Occupational Health and Safety.
• Any other scope of work assigned by the Senior Project Manager / Project Director.

Requirement:

• Relevant degree in Mechanical Engineering and recognized by PEB, Singapore.
• Develop, design through establishing, design briefs, design reports, calculations, schematics, schedules, specifications
• Tendering and Estimation is a must
• Having experience working with Electrical, Fire Protection & Solar Projects would be an added advantage
• Candidates from the same industry will be highly preferred
• Only Singaporean may apply

Job Descriptions:

• Manage and work with project team to assigned project(s).
• Perform engineering duties such as engineering calculations, planning, tender, estimates, costing, taking off measurement. Preparation/Evaluations as part of the engineering project team.
• Prepare tender document and tender drawings for tender.
• Base on drawing Estimating material, labour, or construction costs for budget preparation.
• Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
• Liaise and coordinate with architect, other consultants, owners and contractors in development and implementation of the project until completion.
• Liaison with clients, project managers, consultants, contractors, and other stakeholders who are handling the project matters.
• Attending site progress meeting and site technical issues.
• Work with other engineers and designers to complete assigned work within deadlines.
• Conduct testing and commissioning of Mechanical and Electrical System.
• Ensure compliance with ISO Quality Procedure and Occupational Health and Safety.
• Comply with all rules and regulations related to safety & COP.
• Any other scope of work assigned by the Senior Project Manager / Project Director.

Requirement:

• Degree in Electrical Engineering or related field
• Develop, design through establishing, design briefs, design reports, calculations, schematics, schedules, specifications
• Tendering and Estimation is a must
• Having experience working with Electrical, Fire Protection & Solar Projects would be an added advantage
• Registered LEW would be an added advantage
• Understanding of electrical engineering codes and safety standards
• Candidates from the same industry will be highly preferred
• Only Singaporean may apply

Responsibilities:

• Maintain and support AI infrastructure.
• Monitor system performance and reliability.
• Troubleshoot and resolve customer issues.
• Collaborate with cross-functional teams to improve system capabilities.
• Ensure system security and compliance.
• Rotated on call to handle emergency customer issues.

Requirements:

• 1-3 years of experience in a similar role.
• Strong Linux administration skills.
• Basic knowledge of networking and storage solutions.
• Proficient in using NVIDIA AI-related toolsets.
• Skilled in installing and debugging AI-related drivers and runtime environments.
• Familiar with model training, tuning, and inference, capable of effectively identifying and troubleshooting various issues during operation.
• Excellent problem-solving skills.
• Ability to work in a team environment.

Preferred Qualifications:

• Experience with cloud platforms.
• Familiarity with container technologies like Docker.

Language Requirements:

· Fluency in English is mandatory, and Mandarin is a plus.

Job Description:

• Work with Project Manager to confirm system designs and procurement
• Monitor project progress of sub-contractors and conduct site inspections regularly
• Manage sub-contractors for efficient and prompt completion of work
• Make sure project is carried out according to schedule
• Review and align Fire protection design drawings to ensure compliance with design specifications and guidelines (Sprinkler System, Fire Alarm System, Hose reel System, Wet/Dry riser system, Fire Hydrant System, Fire man intercom system)
• Attending to all site meetings with owner, consultants and main contractors on all matters related to the project operation and coordination
• Follow up with maintenance of fire protection systems during DLP
• Raise MR and order material & arrange manpower for necessary works
• To do quantities take off & prepare cost breakdown and comparison sheet
• Other scope of work to be assigned by the Management

Requirement:

• MUST possess at least Diploma / Advanced / Higher / Graduate Diploma in Engineering (Mechanical) or equivalent
• MUST have at least 3 years relevant work experience in Fire Protection System/Sprinkler System
• Experience in Data Centre will be an added advantage
• Good communicator with excellent coordination skills
• Committed individual with great initiative and strong problem-solving skills
• Knowledge of AutoCAD added advantage
• Strictly for SINGAPOREAN ONLY

Responsibilities

· Understand customer demands, challenges, and objectives through assessments, information gathering and Customers, technology/industrial engagements

· Collaboration with sales & business development, product & engineering stakeholders including analyse and selection of appropriate hardware, software, and services to create the winning solution offering to customer and markets

· Developing detailed proposals, presentations, and technical documentation that outline the proposed solutions, including features, benefits, and pricing. Presenting these proposals to customers in a clear and compelling manner

· Preparation and conduct of product and solution exhibitions, demonstrations and proof-of-concept activities to showcase the capabilities and address any technical questions or concerns from customers

· Providing technical expertise and support to business development & sales team throughout the sales cycle, including participating in customer meetings, responding to technical queries, and contributing to the development of sales strategies

· Building and maintaining relationships with technology vendors and partners to stay informed about the latest products, technologies, and industry trends. This includes evaluating new solutions and incorporating them into proposed designs

· Keeping up-to-date with advancements in communication technologies, industry standards, and best practices. Pursuing opportunities to enhance technical skills and knowledge

Requirements

· Degree in Electrical/Electronics/Communications Engineering

• Minimum 5 years’ experience in Communications/Telecommunications/Infosystems Solutions Engineering and Implementations, supporting as a Pre-Sales capacity

· Strong understanding of communications technology

· Able to follow up closely with customers in order to answer to their needs

· Working location is in Jurong East

· Singaporeans Only

Please submit resumes to [email protected]

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

INFORMATION:

As a Data Center Segment expert, the Sales Engineer is responsible for leading, developing sales strategies and plans as well as generate new business opportunities to the company.

The position does this by locating, developing, defining, negotiating, and closing business relationships with potential and existing key accounts, end customers, consultants, and system integrators.

The position maintains extensive knowledge of current market conditions, competitive positions, and solutions/services that PS can provide to develop the pipeline of business coming into the company.

This position has the ultimate objective to aggressively achieve profitable growth through monitoring of Data Center project pipelines and assisting to convert these into actual orders.

RESPONSIBILITIES

Generate new business opportunities and proposes potential business deals by contacting potential customers, decision makers and target accounts. Screens potential business deals by analyzing market strategies, deal requirements and evaluate options.

Works closely with local, regional, and global teams to close new business deals with persuasive approaches and pitches that will convince potential key accounts/customers to do business with PS. Collaborates to establish long term working relationships with key stakeholders and decision makers at different management levels across key accounts’ organizations.

Establish, cultivate, and maintain key relationships with end customers, influencers, and contractors. This can be done in conjunction with distribution partners and direct engagement.

Uncover and build opportunity pipelines with Sales, end customers and advance through the sales stages progressively till deal closure. Ensures that data is accurately entered and managed within PS’s CRM and sales/project management system.

Establish budgetary forecasts and sales volume targets for the SEA DC market.

Collaborate with Sales to assess level of involvement required from distribution to ensure success of closing business and project opportunities. Provides project guidance for price and quotation strategy to distribution network.

Identifies and support in qualification of strategic alliances to expand PS solution, products, and services; and business networking to leverage into additional markets.

Provide front line Data Center related marketing and technical support to distribution partners and dealers, as necessary.

Analyze sales and marketdata to provide relevant information to senior management for decision making.

Plays an active role in promoting PS in trade events and associations. Works with Marketing and Engineering to create, prepare and present technical papers and other application specific white papers for marketing collateral, trade journals and conferences.

Be the expert in Data Center power products and solutions, industry standards and overall on-site power system design and integration.

TRAVEL

This position requires travel up to 50%.

REQUIREMENTS

Degree in Electrical or Mechanical Engineering with at least 8 years of relevant sales experience in the power generation business.

Solid proven direct and channel sales track record. Able to present and negotiate with senior executives and decision makers both internally and externally.

Results driven, strong will to compete and win in a business environment.

A good team player and enjoys interacting with people of all levels.

Able to travel frequently and work independently.

CRITICAL TECHNICAL, PROFESSIONAL AND PERSONAL CAPABILITIES / SKILLS

Experience in Data Center segment is critical to the growth of PS business. Strong technical knowledge of power generation products and solutions. Has good knowledge of industry standards and requirements.

Strong people and communication skills that engages and motivate others. Able to stimulate new thinking and remain customer focused.

Strong drive to succeed; motivated, energized and demonstrates high level of enthusiasm.

Excellent team player. Able to lead or participate in cross-functional teams to achieve goals and objectives. Objective, open-minded and receptive to feedback.

WORKING HOURS / LOCATION

5-day work week

8.30am to 5.15pm

Located in Jurong

OTHER BENEFITS

Annual leave - 15 days up to 21 days

Medical, dental, optical and annual health screening benefits

Company transport provided at Boon Lay MRT station

Other allowances applicable

Interested applicants, please attach your resume with your current salary. expected salary, reasons for leaving and notice period upon application.

Gladwin Teo Jian Rong

EA No. 23C1599

EA Personnel no. R1768774

Job Description:

We are looking for an experienced Electrical, Instrumentation & Control Engineer (EIC Engineer) to manage and execute the design, installation, and maintenance of electrical, instrumentation, and control systems across a variety of projects. The ideal candidate will have a strong background in electrical and control systems engineering, as well as hands-on experience with instrumentation, PLCs, SCADA, and DCS systems.

Key Responsibilities:

• Design & Implementation: Design, develop, and implement electrical, instrumentation, and control systems for industrial projects.
• System Configuration: Configure and program PLC, SCADA, and DCS systems to ensure seamless automation and control.
• Installation & Commissioning: Oversee the installation, commissioning, and testing of electrical and control systems on-site.
• Maintenance & Troubleshooting: Perform preventive and corrective maintenance on electrical, instrumentation, and control systems.
• System Calibration: Calibrate and validate instruments to ensure accuracy and proper functioning.
• Safety Compliance: Ensure all electrical and control systems adhere to safety standards and regulations (IEC, NEC, ATEX, etc.).
• Collaboration: Work closely with cross-functional teams, including electrical engineers, mechanical engineers, and project managers, to meet project deadlines.
• Documentation: Maintain detailed documentation of designs, configurations, test results, and maintenance activities.

Qualifications:

• Education: Bachelor's Degree in Engineering, Instrumentation Engineering, Control Systems, or a related field.
• Experience: Minimum of 1 years of experience in electrical, instrumentation, and control engineering, with a focus on industrial applications.
• Technical Skills:Proficient in the design and configuration of electrical systems.
  Hands-on experience with PLC programming
  
• Problem-Solving: Strong troubleshooting and analytical skills in electrical and control systems.
• Communication: Excellent written and verbal communication skills.
• Certifications: Relevant certifications (e.g., Certified Control Systems Technician) are a plus.