Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Mechanical Engineering
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Electrical / Mechanical Engineering.
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

JOB PURPOSE

The role is primarily responsible to assist the Procurement Manager in the management of product sales performance and yield studies of the fresh categories.

JOB RESPONSIBILITIES

Responsibilities include, but are not limited to:

• Manage all suppliers & contracted partners.
• Monitor product sales, margin, mix & range, promotions to achieve pre-set KPIs.
• Manage standing orders, central purchased orders and direct supplies
• Work with stakeholders to develop customise product mix to achieve higher returns.
• Coordinate to organize onsite-offers/ thematic promotions and publicised offers on press and social media to meet KPIs prescribed by management.
• Source for new leads from source of origin or main principle supply.
• Compile reports and conduct presentations to management and/or panel of stakeholders.
• Visit customers regularly.
• Attend overseas procurement, inspection visits and trade events when required.
• Other tasks as and when assigned.

JOB REQUIREMENTS

• At least 2 years of procurement or demand planning experience.
• Prior buying/supply experience in the supermarket retail trade will be giving priority
• Possess valid driving license and own transport preferred.
• Self-motivated and target driven.
• Meticulous and analytical.
• Skillful negotiator and effective communicator.
• Strong IT literacy proficient in Excel and PowerPoint.

Job Description:

· Responsible in the design and development of highly complex and scalable Python modules.

· Take ownership of end-to-end technical delivery against project timelines and requirements.

· Participate in requirement analysis while recommending alternative solutions.

· Integrate applications using middle ware software’s such as Avro kafka and database design.

· Deploy applications to open shift via CICD pipeline.

· Working with application support, developers, and product owners to ensure successful releases.

· Flexibility to work extra hours to meet corporate and departmental goals.

· Must have the ability to prioritize and manage multiple concurrent tasks in a fast-paced environment while working

under pressure.

Job Requirements:

· Degree in Computing / Computer Science / Engineering preferred.

· 3 to 8 experience preferably in the financial / fintech industry.

· Experience in supporting trading desk

· Experience in Agile/Scrum methodology.

· Excellent troubleshooting and debugging abilities for 2 tier and multi-tier applications.

· Should have worked as first line application support for trading systems and back office with experience in

analysing of issues raised by end users and general system checks and maintenance tasks.

· Strong analytical & problem-solving skills.

· Experience in documenting the design and development work in confluence.

· Expertise in Python (OOPs Concepts, flask/Django frame works, multi-trading, web sockets, and analytics tools such

as pandas, NumPy etc).

· Highly Experienced in Database designing of SQL and PL-SQL with expertise in at least one RDBMS, preferably Maria

DB and MS- SQL.

· Highly Experienced in writing batch scripts using shell scripting.

· Experience in Linux, OpenShift, Avro based kafka, Dockers, Nginx, Sentinel Redis, AngularJS basics, Rest API’s (Flask),

JSON and web sockets amongst others.

· Experience in CI-CD (Continuous Integration Continuous Delivery) pipeline with experience in Bitbucket.

Summary:

• Basic salary up to $3000
• Variable bonus on a yearly basis
• 5 days work week
• 8.30am - 5.30pm
• Location: Jurong East
• Slightly experience in procurement only

Key Responsibilities:

• Generate and issue PO, keep track of procurement activities
• Monitor stock inventories, maintain an updated list of current and incoming inventory and perform monthly stock take
• Liaise with manufacturing team to ensure plant requirements are met efficiently and production runs smoothly
• Liaise with suppliers with deliveries and maintain records of purchases
• Coordinate with forwarder for permit / shipment clearance documents
• Liaise with sales for new requirements of materials and to source as and when required
• Negotiate best quotes from supplies
• Deals with defective goods damaged goods if any
• Other relevant ad-hoc duties

Key Requirements:

• Min 1 year experience in procurement
• Bilingual in English and Mandarin to communicate effectively with Mandarin speaking suppliers

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

You will be at the core team of Delta Research Center leading disruptive technological advancement with strong business value that empower company’s new business in intelligence machines, robotics and automation. As a research engineer, you will collaborate with technical experts to develop state-of-the-art mobile robot products / solution. You will play a key role in continuously improving existing and new products /technology, as well as be part of a dynamic and growing ecosystem in this field. You will manage and execute research programs and projects – particularly in the domain of robotic manipulation that develop and deliver impactful research and business outcomes.

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design system architecture, design and write software for robotic systems, sub-systems or modules in a continuous integration and continuous deployment (CI/CD) environment
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for software development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable software packages
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Adopting latest standards and/or methodology to work (Agile, standards, open source, common platform)

Requirements:

• Degree/Masters in Electronics, Computing, Mechatronics Engineering or equivalent
• 4-6 years relevant experience in robotics software design, development and integration
• Passionate in robotic navigation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in programming languages such as Python and C++, and/or other languages
• Proficient in robot programming using Robot Operating System (ROS) and Linux environment
• Proficient in software development in as AGILE and collaborative environment using CI/CD tools and able to break down robotic software development into smaller tasks
• Experience in one or more of the following domains will be preferred: Localisation, Mapping, Navigation, Machine Vision, Path Planning, Motion Planning, and/or Mission Planning
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player

Lead Mechanical Engineering

Mechanics- CRAFTMANSHIP - Project execution - COOPERATION

The Most Desired Audio Brand

At Bang & Olufsen, we strive to be the most desired audio brand in the world. For more than 95 years, we’ve developed products that change moods, inspire minds, and instill pride in all of us. We are passionate innovators, using our deep knowledge and collaboration skills to solve and simplify complex challenges every day, each of us driven by the profound effect sound can have on the mind. We welcome others that share our passion.

Join us to use your mechanical expertise to create the next iconic wearable Bang and Olufsen product. Here you get to participate in project teams where you in unison with expert colleagues and Partners, drive mechanical architecture and engineering.

Your mission

As our new mechanical engineer for wearable products, you will join our Project development department as part of the global Mechanical engineering team. Here you will drive NPI projects as Sr. Lead mechanical engineer and expert for earphone & headphone program.

Working alongside concept creators, hardware and acoustics specialists, you will create new and exciting products based on Concept and Business briefs. Joining various project teams, you will:

• Acting as lead for the mechanical design creation process, throughout complete NPI phase.
• Master concept and architecture engineering, providing mechanical engineering and knowhow.
• Make assessments and recommendations e.g., on material and process choices based on mechanical design principles, supporting design for perfection, longevity and magical elements.
• Create mechanical constructions and make proof of concept by rapid prototyping & simulations.
• Cooperate with suppliers for exploration and product development, transforming proven concept and architecture into product requirements.
• Work closely with Quality organization and Partners to ensure product and process validation.

Your network

You will become a part of the global mechanical team. We are a very dynamic team that approach our tasks with vigor and technical curiosity as we are all proud engineers loving our products and exist to create amazing products.

We are an experienced team, and you bring a lot of experience and join a very inspiring environment. Here you will have room to grow and the opportunity to bring your ideas and passion for mechanical design and development into play.

Your location

You will be working out from our office in Singapore. Working closely with your colleagues in a global setting and suppliers in Europe, China and other parts of Asia, you should also expect there to be some travel activity.

Education & Experiences

A passion for mechanical engineering & creation. You have a well-founded and deep understanding of mechanical architecture, design, manufacturing processes and material characteristics. Experiences of leading suppliers and have the capability to transform proven architecture into product requirements.

Moreover, you bring:

• Degree or master’s in mechanical design, Engineering
• 10+ years of experiences in R&D or product development
• Design experiences in audio, wearable products, hearing aids devices an advantage
• 3D CAD design SW such as Creo Parametric
• Capable of Architecture design with good understand of GD&T, simulation
• An understanding of the different tooling processes for different material such as plastic, silicon, aluminium, steel, glass and wood
• An open mind, technical curiosity, and attention to detail
• Good communication skills in English. Fluent in Mandarin a plus.

Ready to join the most desired audio brand in the world?

Then send your CV and application by pressing the apply bottom above. Applications are assessed continuously, so please apply as soon as possible and no later than 31st January 2025.

Read more about our recruitment process and explore your career opportunities within Bang & Olufsen, https://www.bang-olufsen.com/en/corporate/careers

Responsibilities:

· Project management involving Sanitary, Plumbing & Gas Services

· Documentation of method statement and work procedures

· Review and monitor site construction activities programme to ensure work completion as scheduled

· Evaluation, Cost estimation & analysis for Sanitary, Plumbing & Gas Services

· Preparation of design construction drawings

· Liaison with all parties involved in the project including Local Authorities, Consultants, Architects, Main contractor, Sub-contractors & Suppliers

· Attend site meetings and inspections.

Requirements

· Degree / Diploma in Mechanical or related discipline

· Knowledge of tender costing with experience in evaluation and cost estimation for Sanitary, Plumbing & Gas Services will be an added advantage

· 3 years working experiences in similar position with relevant design and installation knowledge preferred but fresh graduate may apply

· Excellent interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design, develop, prototype, integrate and test advanced robotic mechatronic system and sub-system (sensing, manipulation, control, human-interaction, etc…)
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for mechatronic system development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable mechatronic sub-systems to be integrated into various AMR platforms
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Requirements:

• Degree/Masters in Mechatronics or Electronics Engineering or equivalent
• 4-6 years of relevant experience in mechatronic system design, development, and integration
• Passionate in robotic manipulation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in mechatronics CAD design tools such as Altium, PADS, AutoCAD or similar
• Balanced skills and experiences in mechanical design, basic electrical circuitry and microcontroller programming
• Proficient in programming languages such as Python and C++, and/or other languages
• Hands on experience in commissioning of industrial robots/mobile robots/mobile manipulator
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

Job Position:- Senior Resident Engineer (C&S)

Time:- Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• More than 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

We are looking for a Package-Silicon Integration Engineer in Micron's Package Development Engineering (PDE) Group, who will be responsible for driving advanced package development for next generation silicon and package technologies. You will collaborate with various functional teams such as silicon wafer design, package design, wafer fab to meet project requirements. You will drive the technology development through multiple phases of product maturity and contribute to Micron's strategic objectives of Technology leadership.

RESPONSIBILITIES include but are not limited to:

• Work with package design and development teams to complete chip package interaction risk assessment.
• Work with scribe designers and assembly engineers to find solutions for dicing problems and implement relevant design rules/FMEA.
• Work with die designers to enable design for manufacturing in area like die size, scribe width and pad size.
• Collaborate with R&D/manufacturing wafer fabs and packaging teams to solve relevant issues, and improve yield, quality and manufacturability.
• Contribute to development of new silicon and package technologies by engaging with Micron’s internal factories.
• Define test vehicles, plan DOEs, characterize enabling technologies, document best-known-process and hand-off to manufacturing.
• Identify technology, quality, business process gaps and develop solutions.

EDUCATION, EXPERIENCE & QUALIFICATION REQUIRED

• Masters or Bachelor’s degree in Engineering (Mechanical, Materials Science, Electrical, Chemical) or related field
• 3-5 years of semiconductor fab/Assembly experience in Integration
• Strong Project / Program management skills
• Possess sound methodology for organizing work, decision-making and setting priorities
• Strong analytical, problem solving, and organizational skills
• Proficiency in computer applications like Excel, Word, Power Point.
• Self-motivated and team oriented.
• Strong interpersonal, oral and written communications-skills.

Keen on the role? Apply now!

Summary:

• Basic up to $5000
• Variable bonus
• Location: Central areas
• 5 days Mon - Fri
• Must have ACMV & LTA / SMRT experience
• Career progression

Key Responsibilities:

• Assist Managers in Mechanical engineering projects of various sizes and complexity
• Assist Managers in analyzing customer design proposals and specifications
• Assist Managers in leading a project team to ensure client expectations are met
• Work closely with clients to deliver the end project
• Maintain and grow current business and client relationships
• Provide quality and cost control during the design and construction process
• Manage / maintain project schedules and project cost summaries to track work progress, budget status, and manpower resource utilization
• Other relevant ad hoc duties

Key Requirements:

• At least 5 years of relevant experience in construction field as a Mechanical Engineer
• Must have experienced in ACMV & involved in LTA/SMRT projects

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

*5 days Workweek

*Medical and Dental Reimbursement

Job Description

• Prepare and monitor long-term and short-term inventory and procurement planning
• Ensure smooth material flow and sufficient quantity for production
• Responsible for the sourcing and purchasing of Raw & Packaging materials, semi-finished good, spare parts and office used equipments etc
• Liaise with various International and Local new suppliers to source for new products
• Manage good relationship with current suppliers
• Obtain the highest quality materials at competitive prices
• Negotiate for competitive price from few quotations
• Review and issue supplier / subcontractor evaluation report
• Ensure the purchasing system and procedure comply with the QMS and Food Safety programs
• Maintain and update ISO / HACCP / BRC documentations

Job Requirement:

• Bachelor Degree / Diploma or equivalent in Business / Supply Chain
• At least 2 years' of procurement experience in manufacturing industry
• Proficient in an ERP system, preferred with Business Central 365 (Microsoft Dynamic Nav)
• Good proficiency in Microsoft office
• A good team player, energetic and willing to work hard
• Good communication skill

Interested applicant may whatsapp resume/ cv to +65 84597671

Seeking Site Engineer with prior knowledge and experience tomaintenance and troubleshooting and repair equipments such asTLD ACU, GPU, Tow Tractor, ASU, boom lift and scissors lift, hydrauliccylinder and general electrical troubleshooting. Will be deploy atvarious site in singapore for general repair, servicing andmaintenance of basic ground support equipment.

Job Description:
We are seeking an experienced AI Chip DFT (Design for Test) Engineer to join our team. This role involves the design and implementation of test architectures for AI chip designs, ensuring efficient and reliable testing processes. The ideal candidate will be responsible for integrating DFT circuits, performing simulations, developing test vectors, and supporting yield improvement and fault analysis.

Key Responsibilities:

• DFT Architecture Design: Lead the design of DFT architecture at the chip level, implementing testing circuits such as Scan, Mbit, Memory repair, and Bscan.
• DFT Circuit Design and Insertion: Implement DFT circuits and integrate them into the chip, ensuring proper timing constraints for DFT mode convergence.
• Functional Verification: Perform functional verification, pre-simulation, post-simulation, and power simulation of DFT circuits. Troubleshoot and resolve any issues encountered during testing.
• Test Vector Development: Develop high-coverage, low-cost test vectors and validate them through simulation and timing analysis.
• Yield Improvement and Fault Analysis: Contribute to yield improvement efforts and fault analysis. Assist with testing SDC (Synopsys Design Constraints) constraint files in testing modes and help with timing and power convergence in the backend.

Qualifications:

• Educational Background: Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s or Ph.D.) are a plus.
• Professional Experience: Minimum of 4-5 years of experience in DFT, with expertise in chip-level DFT architecture design, circuit insertion, and testing.
• Technical Skills:
  • Proficiency in DFT methodologies, including Scan, Mbit, Memory repair, and Bscan.
  • Strong experience with functional verification and simulations (pre/post, power simulation).
  • Ability to develop efficient test vectors and perform timing and simulation analysis.
  • Familiarity with yield improvement and fault analysis processes.
• Tools & Scripting: Experience with DFT tools and scripting languages (e.g., TCL, Perl, Python).

Soft Skills: Strong problem-solving skills, attention to detail, and the ability to collaborate effectively with cross-functional teams.

We are a design and build contractor in the construction industry

We also provide project management services in the construction industry.

Roles and Responsibility:

1. To assist project manager in managing construction projects in industrial /residential sectors

2. To assist project manager in managing client ,consultants , subcontractors and peers in project delivery context

3. To be responsible for progress reporting

Skill & Certification

5. Attained Degree or diploma is construction disciplines

6. Attained Safety Course for project manager certificate

7. Proficient in project Microsoft project

8. Proficient in autocad software

9. Min 1 to 3 years experience in construction industry.

Key responsibilities:

• Provide IT support operation on daily basis, include below activities:

- IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;

- Support HR on all employee on-board/off-board process including IT training;

- Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);

- IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;

- Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.

- Troubleshoot and configure the firewall, router and switch when issues arises.

- Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;

- Liaise with IT vendor management, include IT hardware/software quotation, costing, PR process and make proposal if any recommend system tools).

• System maintenance work on regular basis, include below activities:

- All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;

- Coordinate department head on storage Clean up include File server, SharePoint and NetApp;

- Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;

- Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;

- Regular update antivirus related tools and window related system patches.

• IT governance and direction:

- Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;

- Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);

- Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;

- Assist external or internal auditor on IT compliance or ISO related audit;

- Evaluate vendor proposal and provide justification to management.

• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):

- IT project plan, budgeting and proposal;

- IT project deployment after project approved;

- IT project verification and provide necessary training to end user;

- IT project sign off and documentation.

Additional responsibilities:

• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

System Integration Engineer Job Scope
For users with testing requirements such as SMPS, SERVER POWER, EVSE, PV, BATTERY, BOBC, Passive Components, and Safety Regulations, the Quantel System Integration Engineer is responsible for the design and implementation of Automated Test Systems (ATS), handling both hardware and software tasks throughout the project lifecycle.

Pre-Project Responsibilities

1. Participate in the pre-sales process for Automated Test Systems (ATS).

2. Evaluate the cost Bill of Materials (BOM) and project schedule for system integration.

3. Discuss and define test purposes, requirements, and acceptance conditions with clients.

In-Project Responsibilities

1. Hardware

a. Procurement of system cabinets and customized mechanical parts

b. Procurement and installation of electrical components.

c. Creation of electrical schematics.

d. Installation and wiring of Chroma or third-party instruments.

e. Conduct Factory Acceptance Testing (FAT).

2. Software

a. Program on Chroma’s exclusive testing platforms (SMPS ATS8000 / BatteryPro).

b. Develop programs based on user test requirements, regulations, and instrument configurations.

c. Conduct regulation studies to ensure compliance.

Post-Shipment Responsibilities

1. Provide online remote support and onsite technical assistance, including system installation, site acceptance testing, and training.

2. Follow up on technical issues, providing professional advice or troubleshooting support.

Requirements:

1. Strong foundational knowledge of electronic circuit principles.

2. Excellent time management skills to handle multiple projects effectively.

3. Proactive, self-motivated, and dynamic.

4. Willingness to travel internationally for technical support.

5. Ability to communication with the Taiwan headquarters.

We offer comprehensive professional technical training, including instrument application, software programming and operation, as well as overseas on-site training at client sites or the Chroma Taiwan headquarter.

6. Diploma in Electronics Electrical Engineering.

7. Fresh graduate or 1 years or more working experience

8. Preferable experience in Electronics Test and Measurement Instrument.

9. Class 2/3 driver licence.

10. Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

Main Responsibilities

1. Plan and execute layout designs for modules or single-chip circuits, including routing and verification tasks such as DRC, LVS, and EM checks.
2. Enhance product performance through optimized layout design techniques.
3. Collaborate effectively with design engineers to achieve layout design objectives.
4. Prepare and review tape-out data for accuracy and completeness.
5. Draft layout design documentation.

Requirements

1. Bachelor’s degree or higher in Electronics, Microelectronics, or related fields.
2. Direct experience in analog and mixed-signal IC layout design; familiarity with EDA tools such as Virtuoso, Calibre, and EM verification tools.
3. Proficiency in CMOS/BCD MOS processes and device structures, as well as layout handling for common package types.
4. Familiarity with common ESD protection device structures, principles, and full-chip latch-up protection methods.

5. Strong written and verbal communication skills in both English and Chinese.

6. Proactive, diligent, and capable of working under pressure; excellent learning, communication, and teamwork skills.

This role welcomes both fresh graduates and experienced engineers.

Working location: Thomson

Job Summary:

This role is responsible for overseeing the testing and commissioning of electrical equipment on-site, ensuring adherence to project specifications and safety standards. The successful candidate will play a key role in verifying the proper installation and functionality of electrical systems, collaborating with clients and contractors to achieve successful project completion.

Key Responsibilities:

• Directly supervise and coordinate on-site testing and commissioning activities for electrical equipment, ensuring compliance with relevant codes, standards, and project requirements.
• Review, prepare, and submit comprehensive site acceptance test reports, documenting test procedures, results, and any identified discrepancies. Maintain accurate records of all testing and commissioning activities.
• Thoroughly review single-line diagrams, electrical schematic drawings, and other technical documentation to ensure proper system understanding and identify potential issues.
• Conduct and/or assist in electrical equipment installation inspections to verify compliance with design Actively participate in site activities and meetings involving clients, contractors, and other stakeholders, providing technical expertise and ensuring effective communication.
• Identify and troubleshoot electrical system issues during testing and commissioning, implementing corrective actions as needed.
• Enforce strict adherence to all safety protocols and procedures during testing and commissioning activities to ensure a safe working environment.
• Undertake tasks and assignments as directed by the Commissioning Lead, prioritizing effectively and meeting deadlines.

Job Requirements:

• Degree in Electrical Engineering
• Minimum of 2 years of local working experience in electrical testing and commissioning within a relevant industry (e.g., construction, infrastructure, power generation).
• Solid understanding of electrical principles, codes, and standards (e.g., IEC, IEEE, BS).
  Proficiency in interpreting single-line diagrams, electrical schematics, and other technical drawings.
  Practical experience in testing and commissioning MV/LV electrical equipment (e.g., switchgear, transformers, protection relays, cables).

*Able to start work within short notice will be highly advantageous.*

Please be notified that only shortlisted candidates will be notified

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: YEO AHN AHN

EA Personnel No: R22109014

EA License No: 21C0845

As Sr/Engineer for PDE Adv. Pkg. FEOL, you will be primarily responsible for identifying, selecting, evaluating new equipment (highly automated and computerized) / new technology to support current and future requirement. You will also be responsible for pilot line setup, installation and qualification of new equipment platform and handover to production group specifically on FEOL. Additional tasks include maintaining a matrix of key equipment platform capability and constraints (TOR - Tool of Records) on current and new equipment platform, collaborating with production group on upgrades of existing production equipment through continuous improvement projects

Job Responsibilities:

Identify, select, and evaluate new equipment/ new technology to support current and future requirements for FEOL area

- Define, development and establish new equipment design/ capability requirements aligned to Process and Packaging Roadmap

- Develop and engage creative solution for new equipment capabilities/ solution to identified constraints or future technology requirements

- Work with equipment suppliers to develop new capability

- Engage in active participation in Package Development Engineering activities

- Conducts equipment benchmarking to establish the equipment suppliers and platforms for future need

- Create decision matrix for equipment and material selection

Installation and qualification of new equipment platform and handover to production group (pilot line setup)

- Plan/submit capital request to acquire new Equipment

- Create purchasing specification (Doc2) document

- Establish the new equipment qualification criteria and activities roadmap with respective functional - team

- Establish project handover requirements and procedures upon machine qualification

- Prepare documentation for handing over with respective site owner

- Conduct data gathering for low volume production

- Conduct training for Site representatives

- Feedback loop for Continuous Improvement after mass volume production

Maintain a matrix of key equipment platform capability and constraints (TOR - Tool of Records) on current and new equipment platform

- Maintain and regularly update the TOR, with inputs from local or other assembly site

- Maintain general knowledge of process and material characteristics and translate to equipment design requirement

- Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Collaborate with production group on upgrades of existing production equipment through continuous improvement projects

- Maintain knowledge of design constraints and weakness of existing platform

- Participate in the continuous improvement projects involving equipment improvement and upgrades

Job Requirements/ Qualifications:
- PhD/Masters/Bachelor’s Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
- Minimum 2 years’ experience in related semiconductor industry
- Experience with technical knowledge on assembly and/or wafer bumping packaging technology, in Technology Transfers and
- Advantage packaging technology and Front end of line background will be preferable and plus point
- Understanding and/or experience in equipment automation solution e.g. GEM300, AMHS and IIOT solution for datamation such as APC, FDC, E3, PCS, SPC) is a plus
- Fast learner, with initiative and independence (min supervision)
- Good teammate, ability to integrate and cooperate with cross function teams and external vendors
- Strong communication and presentation skills
- Understanding of business needs and customers’ requirement
- Strong project management skills to ensure execution to timelines

Permanent, Singapore-based Electronics Service/Application Engineer for Electronics Test and Measurement Instruments. 5 days week (9.00 AM to 6.00 PM) Located near Lavender MRT station.

· Perform hands-on troubleshooting, service and repairs either in house or on-site.

· Provide on-site implementation, commissioning, testing and system integration support.

· On-the-job training is provided.

· Support Existing and New Project

· Any other duties as assign by superior and management

Job Requirements:

· ITE /NiTEC, Diploma in Electronics Electrical Engineering.

· Fresh graduate or 1 year or more working experience

· Preferable experience in Electronics Test and Measurement Instrument/Power Engineering/Battery

· Class 2/3 driver licence.

· Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

Job Type: Full-time

Job Types: Full-time, Permanent

Salary: $3,500.00 - $5,500.00 per month

Job Scope:

• Responsible for co-ordination of all technical activities on assigned project and assist in ensuring successful completion and execution of the assigned projects.

• Set up network equipment/system for site deployment.

• Participate in Site Test with Customers.

• Ensure effective communication and coordination between all disciplines and project participants in the projects, to resolve all site issue hindering the work progress.

• Assist in planning, scheduling and coordination of works and ensure proper deliverables and full compliance to the approved standards.

• Report to the Project Manager on any site issues hindering the work progress. Highlight those changes that might result in omission or variation cost.

• Report to the Project Manager/Site Manager on work progress carried out on site.

Requirements

• Nitec in Electrical and Electronic Engineering.

• Strong communication and coordination skills.

• Basic Network knowledge is required.

• Experience in Wifi, CCTV and Network is preferred.

• Good planning and project management skills.

• Resilience and ability to work under high pressure.

• Good interpersonal skills and ability to manage difficult situations and client relations effectively.

• Experience with M&E Site Coordination will be an advantage.

• Able occasionally at night to work at work for maintenance support.

Skillsets (Must have)

• Experience as a software engineer, with a minimum of 2+ years of proven DevOps and ideally DevSecOps experience.
• Strong knowledge and experience of programming languages such as Java, Python, C# or Javascript/Typescript.
• Good experience in developing software, writing unit/integration test cases and test driven development (TDD).
• Strong knowledge in Linux operating systems and commands.
• Strong knowledge and experience with Git.
• Strong understanding of Docker, Kubernetes (preferably Openshift 4).
• Good communication and written skills.

Skillsets (Good to have)

• Strong understanding of software development best practices including SDLC, Software Configuration and Change Management, Agile, Scrum, Kanban.
• Knowledge and experience with Jenkins, Gitlab, SonarQube, JFrog Artifactory, Cloudbees CD/RO (or equivalent CD tool), and JIRA.
• Knowledge and experience with Helm 3, Terraform and commonly used AWS services as well as AWS automation/IaC stack (e.g. AWS CLI, CloudFormation, Boto3, CDK).

Job Description:

We are seeking a SoC Verification Engineer to test and validate System-on-Chip (SoC) designs. You will work with cross-functional teams to ensure chip functionality through verification using UVM, SystemVerilog, Python, and other cutting-edge tools.

Responsibilities:

• Develop verification plans for module and system-level testing.
• Collaborate with design engineers to address design defects and optimize chips.
• Set up virtual testing environments and develop test cases (direct and randomized).
• Analyze code coverage and functional coverage to ensure thorough testing.

Qualifications:

• Bachelor's degree in Electronics, Computer Science, or related field.
• 3+ years of experience in SoC verification.
• Strong knowledge of UVM, SystemVerilog, Python (TCL/Perl a plus).

Experience in IC Design Process and SoC/IP verification.