Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

Responsibilities:

· Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)

· Monitor basic equipment/process errors and perform recovery.

· Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.

· Logistically transport wafer lots between equipment within cleanroom and between worksites.

· Identify and address potential areas for improvements such as cycle time, utilization, and cost.

· Perform chemical change/ top-up for equipment under supervision.

· Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.

· The candidate may be required to perform shift work (Mon-Fri).

Job Requirement:

· Nitec or Diploma in Electrical/Mechanical/Chemical Engineering

· Basic understanding on semiconductor process is preferred

· 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma holders with at least 5 or more years of experience in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

TikTok will be prioritizing applicants who have a current right to work in Singapore, and do not require TikTok's sponsorship of a visa.

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the team

The team use the most advanced AI technology to combat various risks/violations in TikTok's e-commerce platform, maintain platform security, build a good e-commerce ecosystem, and empower business teams to improve work efficiency. We pursue the ultimate risk detection capability. The fairness and sustainability of the e-commerce ecosystem, high-quality content and merchandise are areas where we are constantly striving for improvement.

-Responsible for using algorithms to mine, identify, and predict risks and low-quality merchants, products, and creators in e-commerce scenarios, and assist businesses in managing and controlling them.

-Responsible for using algorithms to identify events and behaviors that affect product experience and efficiency, and building data models to help create a favorable ecosystem and support business operations.

-Participate in building data for various entities such as e-commerce live streaming/video, products, merchants, and creators, building large-scale network/feature sequence models to support business scenarios such as content understanding, multimodal representation, community mining, and solve problems related to products, live streaming, and video management, and provide support for them.

-Participate in building a large-scale graph storage and graph learning platform to improve relationship building and governance within the TikTok e-commerce community.

-Explore and research cutting-edge technologies in machine learning/graph learning/sequence learning and related fields, implement these technologies in practical business scenarios, and support the production of scalable and optimised machine learning models.

Qualifications

-B. Sc or higher degree in Computer Science or related fields from accredited and reputable institutions.

-Solid coding skills, familiar with deep learning/graph neural network/machine learning frameworks such as PyTorch, TensorFlow, DGL, pyg, sklearn, etc.

-Familiar with one or more algorithms in machine learning/graph learning/sequence learning, such as graph modeling, timing signal modeling, node/subgraph classification, community mining, representation learning, self-supervised/semi-supervised learning, with a certain depth and breadth.

-3+ years of industry experience with solid theoretical foundation of machine learning.

Preferred Qualifications:

-Familiar with the application of related algorithms in data mining, search recommendation, content understanding, and governance risk control preferred.

-Skilled in numpy and pandas for modeling experiments, familiar with big data tools such as Hive, Spark, Hadoop preferred.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

• Collaborate closely with the technical manager or team lead to meet project SLA (Service Level Agreement) objectives.
• Responsible for the installation, configuration, and providing post-sale support for IT security solutions.

Requirements:

• Diploma and above.
• At least 2 years of experience in an IT security environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Our client’s principal activities are to provide Clients with Full Turkey Project Management. This includes engineering, project management through the pre-construction planning, critical path development, construction / fabrication / site management, commissioning and hand over. It has executed a wide range of major projects involving Marine FPSO Conversion/Process Module Construction related to Oil and Gas Industry, Sub-Sea Products, Semi-Submersibles, Repair of Oil Rigs, Pharmaceutical Process Packages and Power Generation Facilities since its foundation in 1990. This vast experience and Total Commitment to Customer Satisfaction has since earned it a strong reputation in the industry as a reliable local business partner that aspire to exceed our clients’ expectations.

It is looking for two Structural Engineers.

Role & responsibilities

Structural Engineer

Responsibilities

· Work out MTO for the respective Projects and hand over to the material coordinator for follow up with the procurement of materials

· Maintain and upkeep the remnant material records for final reconciliation of materials

· Liaise with Project Lead/Superintendent to get knowledge of the project schedules

· Expedite the site fabrication and installation works with the respective sub-contractor teams in achieving targeted progress

· Updating and reporting project progress reports and plan for one -week ahead of activities to be completed

· Consolidate and update information to PR coordinator for items like galvanizing, machining etc apart from project materials for raising Purchase Requests, Variation Orders for client, Site Instructions for sub-contractors

· Coordinate with QA/QC in resolving issues and maintaining project quality standards

· Coordinate with Client representatives for resolving issues and maintaining project quality standards

· Red Line Markup drawings to be done progressively and update engineering regarding the site changes

· Liaise with Project Lead/Superintendent for drawing and site discrepancies, equipment structural clash checks for trouble shooting of fabrication matters and get information for site coordination

· Coordinate and organize scaffolding erection and de-staging activities with trades

· To carry out any other assignments as required by Reporting Officers.

Requirements

· Degree/Diploma in Engineering/Marine Offshore or equivalent

· Minimum 5 years' experience in marine/shipyard operations involving structure fabrication and installation

· Topside Module / heavy steel fabrication and assembly experience

· Ability to communicate effectively, coordinate site activities between different trades to achieve structural completion as per planned construction sequence

· Good inter-personal skills and able to interact and resolve issues with client’s site supervision daily

· Computer literacy – MS Excel for reporting.

Job Related Information

Permanent - 5.5 days’ work week | Monday-Friday 8am-5pm, Saturday 8am-12pm

Department: Production, Structural| Reporting Head: HOD, Structural

Head-Office Location: Office Location: Gul Circle| Singapore 629350

Salary & Benefits

• Monthly Basic Salary will be based on expertise
• OT pay entitlement: OT Flat rate S$8/- per hour
• Healthcare benefits such as Outpatient, Dental, Health Screening etc.
• Cover with insurances, Personal Accident, Hospital & Surgical, Term Life and Work Injury policy
• Variable Bonuses
• 14 days Annual Leave and 14 days sick leave
• Birthday leave / Festival eve half day leave
• NTUC membership – Applicable for only Permanent confirmed staff
• Company transport

NB:

· NO QUOTA FOR THE FOREIGNERS PLEASE.

· This job vacancy is posted on the My Career Future Jobs Bank portal, which is only for the Singaporeans and Singapore PRs.

Please contact our Recruitment Specialist: Leeza Shaheed (R1770675) for further enquiries about the role@ [email protected]| and send your updated CV in MSWORD with the following information: Nationality, full name as per your passport, total yrs. of exp., how many yrs. Of relevant work exp., expected monthly basic salary, latest drawn monthly basic salary, availability, reason for leaving last two jobs.

Venture Cove Pte Ltd

(EA License 21C0547)

65 Chulia Street, #46-00 OCBC Center

Singapore 049513

Instagramventurecovepteltd2901

LinkedIn: http://www.linkedin.com/in/venture-cove-681891249/

Website: http://www.venture-cove.com/

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and deploying functional networks which include LAN, WLAN, WAN
• Responsible in monitoring network performance and integrity and resolving issues tiers of support have escalated by troubleshooting cloud and local infrastructure
• Responsible for planning out network installation and/or upgrade project, assign milestone tasks to support personnel and meet company deadlines for full implementation,
• Responsible for creating, overseeing and testing security measures
• Responsible for mentoring junior team members

Requirements

• Min Degree in computer Science, Engineering or a related field
• Min 3 years of working experience as a Senior Network Engineer or Network Administrator
• Professional certification (e.g. CCNP, CCDP)
• Experience in network administration and architecture
• Experience with access control models and network security

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing technical support to the plating department laboratory and engineering and manufacturing activities
• Responsible in resolving all chemical related issues.

Requirements

• Min Diploma in Chemistry or Chemical Engineering
• Min 3 years of working experience in laboratory in chemical industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

Responsibilities:

· Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)

· Monitor basic equipment/process errors and perform recovery.

· Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.

· Logistically transport wafer lots between equipment within cleanroom and between worksites.

· Identify and address potential areas for improvements such as cycle time, utilization, and cost.

· Perform chemical change/ top-up for equipment under supervision.

· Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.

· The candidate may be required to perform shift work (Mon-Fri).

Job Requirement:

· Diploma in Electrical/Mechanical/Chemical Engineering

· Basic understanding on semiconductor process is preferred

· 3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Key Responsibilities

· Creating complex, enterprise-transforming applications on diverse, high energy teams

· Working with the latest tools and techniques

· Hands-on coding, usually in a pair programming environment

· Working in highly collaborative teams and building quality code

· The candidate must exhibit a good understanding of model implementation, data structures,

data manipulation, distributed processing, application development, and automation.

· The candidate must have a good understanding of consumer financial products,

data systems and data environments, and processes that are necessary for the

implementation of Risk and Finance models

Essential Skills & Prerequisites

· Degree in computer science or a numerate subject (e.g. engineering, sciences, or mathematics)

or Bachelor's/Master degree with 6 years of experience

· Hand-on Development experience with PySpark, Scala Spark and Distributed computing.

· Development and implementation experience of applications for 4-6 years.

· 4 to 6 years' experience designing and developing in Python.

· 4 to 6 years' experience in Hadoop Platform (Hive, HDFS and Spark)

· 3 to 5 years' experience with Unix shell scripting

· 3 to 5 years' experience with SQL

· 2 to 3 years' experience with Spark programming.

· Knowledge of micro-services architecture and cloud will be added advantage.

· Knowledge of Java and Scala will be added advantage

Position Overview

The Autodesk Connected Delivery Team enables internal and external developers to seamlessly integrate Autodesk solutions across Desktop and the Web. We are seeking a motivated Software Engineer in Test to join us in Singapore and be a part of our journey in building the next-generation platform.

You will be part of a team of diverse, smart, and driven engineers. You will be responsible for architecting, designing, building, owning, and testing various components, services, and frameworks, while collaborating with teams across multiple locations.

Responsibilities

• Develop and automate tests for software validation by setting up test environments and designing test plans for desktop products and cloud services
• Align with team goals that connect to the wider organization goals
• Collaborate cross-geo with teams to influence the architecture and design of software and help bring quality into the design of the product

Minimum Qualifications

• BS or MS in Computer Science or related technical field
• 0-2 years of software engineering experience
• Strong background in programming and software testing
• Strong Python/C++ programming skills
• Ability to multi-task between complex projects
• Strong verbal and written communication skills
• Excellent problem-solving abilities
• Enjoys working collaboratively in a team with high trust
• Experience in developing test automation frameworks on Win, Mac and Linux will be a bonus
• Experience with scrum and agile processes will be a bonus
• Familiarity with secure engineering practices will be a bonus
• Technology stack: C++, JavaScript/Python, Selenium

The Ideal Candidate

• You understand what it takes to build and support business critical desktop clients, components, services, and frameworks
• You have a passion for programming, CI/CD, and automation
• You are customer oriented, and drive towards addressing customer pain points
• You believe in taking initiative, ownership and driving towards high standards

Mandatory skills:

AWS and Google Cloud Platform

Job Summary: We are seeking a highly skilled and experienced Senior GenAI Engineer to join our team. The ideal candidate will have a strong background in GenAI development, with a focus on Azure and OpenAI integration. Experience with AWS and Google GenAI services is preferred. As a Senior GenAI Engineer, you will play a key role in designing, developing, and implementing cutting-edge GenAI solutions that leverage the power of Azure and OpenAI technologies.

Responsibilities:

• Design, develop, and implement GenAI solutions that integrate with Azure and OpenAI platforms.
• Collaborate with cross-functional teams to gather requirements and define project objectives.
• Conduct research and stay up-to-date with the latest advancements in GenAI, Azure, OpenAI, AWS, and Google GenAI technologies.
• Develop and maintain scalable and efficient codebase for GenAI applications.
• Optimize GenAI models and algorithms for performance and accuracy.
• Troubleshoot and debug GenAI applications, ensuring smooth operation and minimal downtime.
• Collaborate with data scientists and machine learning engineers to enhance GenAI capabilities.
• Provide technical guidance and mentorship to junior team members.
• Stay informed about industry trends and best practices in GenAI engineering and cloud service integration.

Requirements:

• Bachelor’s or master’s degree in computer science, Engineering,or a related field.
• Proven experience as a GenAI Engineer, with a focus on Azure and OpenAI integration. Experience with AWS and Google GenAI services is preferred.
• Strong programming skills in languages such as Python and/or Java.
• Experience with Azure services, including Azure Machine Learning, Azure Cognitive Services, and Azure Functions.
• Familiarity with OpenAI technologies, such as GPT-3/4 and reinforcement learning frameworks.
• Solid understanding of machine learning algorithms and deep learning frameworks.
• Proficiency in data preprocessing, feature engineering, and model evaluation techniques.
• Strong problem-solving and analytical skills.
• Excellent communication and collaboration abilities.
• Ability to work independently and as part of a team in a fast-paced environment.

Preferred Qualifications:

• Experience with AWS services, such as Amazon SageMaker, AWS Lambda, and AWS AI/ML services.
• Knowledge of Google Cloud services, including Google Cloud AI Platform, Google Cloud Functions, and Google Cloud AutoML.
• Experience with cloud-based deployment and scaling of GenAI applications on Azure, AWS, and Google Cloud.
• Knowledge of containerization technologies such as Docker and Kubernetes.
• Familiarity with DevOps practices and tools for CI/CD pipelines.
• Contributions to open-source GenAI or cloud service integration projects.

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supervising and checking subcontractors’ works according to design drawings, specifications, shop drawings, method statement and local codes and regulations.
• Responsible for design calculation, cost estimation, preparation of plans and details engineering design.
• Responsible for coordinating with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Responsible for overseeing and be overall responsible for works carried out by junior supervisors assigned under their care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the ubcontractors.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 3-4 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Supervise customer requirements and collaborate closely with their IT and maintenance support vendors.
• Take charge of technical issues reported by customers, ensuring they are tracked and resolved promptly, and escalate to the relevant channels when needed.
• Aid with the technical requirements within customers' environments by integrating new and established technologies.

Requirements:

• Diploma in Computer Science or equivalent.
• At least 2 years of experience as a System/Network Administrator.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

• Develop a comprehensive understanding of products and applications.
• Provide technical consultation and service to customers to help solve their applications.
• Secure new customers consistently and offer products/services into a wide variety of manufacturing & related industries.

Requirements:

• Degree in Engineering or equivalent
• At least 2 years of sales or customer service experience in manufacturing environment.
• Excellent presentation, oral and written communication skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

about the company

My client is a leading semiconductor equipment manufacturer with an outstanding international reputation in its field and a great emphasis on training & development. With more than 20 years history, this is a great brand to join at an exicting time in their development.

about the job

• Performs the set-up, calibration, testing and troubleshooting of equipment
• Responsible for Calibration and Repair of electronic boxes
• Setting up of tape & reel cum inspection machines.
• Prepare, setup and qualify machines
• Machine assembly
• Prepares technical reports summarizing findings and recommending solutions to technical problem
• Machine alignment, teaching and test run

skills & experience required

• Diploma / Higher NITEC in Mechatronics / Electromechanical / Mechanical / Manufacturing / Electrical Engineering
• Relevant internship / working experience in cleanroom / front end equipment manufacturing / semiconductor environment will be a plus
• Able to read basic engineering drawings
• Comfortable to be hands on and also with daily documentation & administrative
• Understand machinery automation with electrical, servo, sensor, pneumatic system
• Able to read mechanical drawings and measurement tools, perform I/O check and trouble shooting
• Training given to candidate with no experience
• Willing to work around Ang Mo Kio / Kallang / Lavender area

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Role Description

• This is an on-site contract role as an Infrastructure Engineer (L1 Application Support) located in Singapore. The Infrastructure Engineer will be responsible for day-to-day Support L1 function – Monitoring the alerts and escalate. Follow the SOP and support the L1 function.

Job Description

· Work with infra and app teams on requirement gathering to implementation.

· Review and analyze infrastructure architecture and identify the gaps.

· Perform RHEL OS patching and other administration tasks for cloud projects

· Guide app team to troubleshoot infra related issues.

· Be the SME for Linux / Unix OR windows administration and automation.

• Perform IT technical support and hardware troubleshooting and part replacement of IT equipment (servers, storage, desktops)
• Responsible for IT relocation and IT cabling management
• Handle Windows 10 deployment services and AD (servers), PC and notebook deployment services, cloning, on-site set up, etc.

Requirements:

• MCSE/CCNA Certified
• Diploma and above
• At least 2 years of relevant working experience
• Possess Class 3 license (company van will be provided when doing client visit)
• Standby 24x7 on rotational basis

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Handle a team of line leaders and operators to meet daily production output, quality, productivity, and yield.
• Responsible for manpower, overtime and consumables planning and perform daily pass-down meetings and escalate line issues.
• Ensure manufacturing and safety procedures are observe at all times.

Requirements:

• Diploma in Engineering or equivalent
• At least 2 years of experience in High-Tech, High-Vol Manufacturing industry.
• Able to work 12-hour shifts (day or night)

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Operation and maintenance of electrical systems.
• Continuous monitoring of performance to ensure maximum uptime.
• Coordinating projects for the installation of new equipment.
• Troubleshooting system abnormalities and offering technical solutions.
• Oversight of external contractors and vendors while maintaining safety standards.

Requirements:

• Degree in Electrical Engineering or equivalent.
• At least 3 years working experiences.
• Expertise in operating and maintaining Transformers, LV and MV switchboards, UPS, Motors, Frequency Converters, and power distribution systems.
• Familiarity with low-voltage systems, including Fire Protection, CCTV, PA, and network systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Accountable for equipment capacity improvement, verification and Operations productivity improvement.
• Establish planning factors for short-term planning and scheduling as well as for strategic planning scenarios.
• Create strategies for shop floor scheduling to meet the planned output.
• Liaise with Production to control dispatch points to ensure a smooth production.

Requirements:

• Degree in Industrial Engineering or equivalent
• At least 2 years of experience in manufacturing and logistics process, systems, and product costing in High Volume Manufacturing industry.
• Proficient in SAP and Microsoft Office

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740