As a technical support engineer, you’ll be part of a global team whose main focus is ensuring that Wise API integrations get an industry-leading level of assistance when they need it. You’ll work with Wise Platform enterprise partnerships and business payouts customers, Open Banking providers, and self-onboarded API users. They all depend on rapid and dedicated support: from general questions about the behaviour of an API or webhook, to acting as a first-responder for a major incident.

What you'll be doing:

• Develop a deep expertise in the Wise API products and capabilities, and solid understanding of how Wise Platform partnerships have integrated with the solution. You’ll collaborate with teams across the Wise Platform and Open Banking products to do that.

• Support the team to help contacts across all channels, primarily over email in our support queues, and also by phone in the case of critical issues for a partnership.

• Contribute significantly to troubleshooting and solving issues users report, both independently and collaboratively with engineering and commercial teams in Wise.

• Enable the rest of the team to support API users globally, by sharing and capturing knowledge and trends on the issues users are raising.

Responsibilities:

• Perform servicing of chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning / BMS / ACMV / HVAC
• Positive attitude

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Responsibilities:

• After market sales related promotion to existing customers in Singapore
• Regular " patrol " activity as pro-active maintenance promotion. Patrol / Check machine condition / Report / Service proposal with quotation & manage prospective / secure order / execute maintenance job by team
• Solutioning skills such as Troubleshooting / proper report and action order to the team.
• Compressor system improvement proposals
• Energy saving proposal with existing system diagnosis
• Help up and coordination with Sales & Marketing department. Job task share when the existing customer does machine replacement or expansion / upgrading orders.

Requirements

• Diploma or above in Engineering related academic
• More than 3 years experience in similar industry
• Possess Class 3 Driving License.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to kenneth(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Kenneth Tan Guan Quan

EA Personnel Reg No: R1550240

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Responsibilities:

• Install GT Power & Distribution Transformers, HT & LV Switchgear, and substation equipment.
• Oversee material planning, cable tray/support installation, and project coordination.
• Lead testing & commissioning of electrical systems.
• Perform quantity surveying and ensure quality assurance/control.
• Manage electrical project timelines and budgets.
• Coordinate with other service providers to ensure smooth site installations

Requirements:

• Minimum 7 years experience in electrical engineering, ideally in the semiconductor industry.
• Proven expertise in electrical system installation and project management.
• Strong skills in material planning, quantity surveying, and quality control.
• Bachelor's degree in Electrical Engineering or related field.

Job Summary:

We are seeking a highly skilled Marine Structural Analysis Engineer to join our team. The successful candidate will be responsible for performing detailed structural analyses and design evaluations for various marine structures, ensuring safety, reliability, and compliance with industry standards and regulations.

Key Responsibilities:

• Perform structural analysis and design of marine structures including ships, offshore platforms, and subsea installations.
• Utilize advanced finite element analysis (FEA) tools and software to conduct stress, fatigue, and dynamic analyses.
• Develop and validate structural models to simulate and predict performance under various loading conditions.
• Collaborate with multidisciplinary teams to integrate structural analysis results into overall project designs.
• Prepare detailed technical reports, design documentation, and presentations for stakeholders.
• Ensure compliance with relevant industry codes, standards, and regulatory requirements.
• Participate in design reviews, risk assessments, and failure mode analysis.
• Provide technical support during the construction, installation, and operational phases of projects.
• Stay updated with the latest advancements in marine structural engineering and analysis methodologies.

Qualifications:

• Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, Naval Architecture, or a related field.
• Proven experience in structural analysis and design of marine structures.
• Proficiency in using FEA software such as ANSYS, ABAQUS, or equivalent.
• Strong understanding of marine structural codes and standards (e.g., DNV GL, ABS, ISO).
• Excellent analytical, problem-solving, and decision-making skills.
• Strong communication skills, both written and verbal, with the ability to present complex technical information clearly.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) license or Chartered Engineer (CEng) status is preferred but not required.

Preferred Skills:

• Experience with structural analysis of offshore wind turbines, oil & gas platforms, and subsea structures and marine vessels.
• Familiarity with software tools such as MATLAB, Python, or other programming languages for custom analysis and automation.
• Knowledge of marine construction techniques and materials.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A dynamic and collaborative work environment.
• The chance to work on innovative and challenging projects in the marine industry.

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards

1. Preparing the project reports and guidelines as per the instructions of higher authorities.
2. Assisting senior engineers in conducting research, designing systems, and analyzing data of specific projects.
3. Identify the problems of execution of project and solve them using engineering principles.
4. Maintaining equipment and inventories of the organization.
5. Collaborating with co-workers to meet the goals of projects.
6. Ensure testing and quality control processes of the products.
7. Stay familiar with the advancement in technologies to develop the highly demandable skills.
8. Following safety guidelines and engineering parameters to executive the project tasks.
9. Participating in learning and development sessions to gain expertise.

Job Responsibilities:

1. Update CMS database checklists based on the latest engineering drawings and punch lists for mechanical/electrical processes, safety, and HVAC disciplines, and assign tasks accordingly.
2. Prepare boundary drawings to support subsystem listings.
3. Develop procedures, method statements, and risk assessments for commissioning activities.
4. Attend supplier Factory Acceptance Tests (FAT) as required.
5. Lead a team of mechanical/electrical technicians and mechanics to perform on-site preparation and execution, liaising with all parties, including supplier representatives, to resolve issues promptly.
6. Be adaptable to overseas travel and prepare the required documentation.

Candidate Requirements:

1. Relate experience in commissioning within the oil & gas or marine industry required.
2. Hands-on experience in commissioning diesel generators, compressors, pumps, piping systems, packaged equipment, cranes, mechanical handling equipment, HVAC, etc.
3. Familiar with work permit systems, lock-out tag-out (LOTO) procedures, and project specifications, technical, and HSE standards.
4. Experience with completion management system databases such as PIMS-CMS, WinPCS, ProCoSys, or ICAPS is a plus.

Benefits:

1. Annual Leave: 7 days in the first year, increases by 1 day annually, up to 14 days.
2. Medical Leave: 14 days per year.
3. Bonus: Based on performance.
4. Transportation provided (shuttle service available). Accommodation is located in Singapore.

Job Description

Business Development

· Prepare Standard Quotation Forms for Cost Estimation in line with tender scope/summary

· Assist BD in preparation and submission of tender documents (e.g. Fill-in Tender Forms, Contractors particulars & Technical Data (Upon receipt from PICs) as per Tender Format

· Prepare Hard Copy/Soft Copy of Bid with necessary supporting documents as per submission requirement as instructed by BD

· Quantity take-off, materials sourcing, measuring, and estimating materials and labor costs used in the tendering process.

· To request for quotation and liaise with subcontractors and suppliers for various trades.

· Oversee of review contracts, identify irregularities in order to ensure compliance of contracts and the drawings.

· Prepare and analyze costings for tenders

· Assist to prepare tender and contract documents including bill of quantities

· Perform quantity take off for tender

· Prepare costing and budget, pre and post-tender estimate

· Prepare and compile tender documents

· Attend site show round/ tender briefing

· Manage the financial & contractual of all projects from pre-tender stage including quantities, variations, cost estimates, to tender submission;

· Monitoring and keeping track on Contract Insurances details (e.g., expiry date vs project actual completion dates/ indemnity liabilities of stakeholders, etc.)

Administrative

· To provide support to Business Development (BD) team by carrying out general administrative duties.

· To assist and maintain proper and systematic documentation e-filing system for outgoing and incoming data.

· To support and use of company internal ERP system to execute daily tasks.

· To manage and track status of Project Quotation and Project Registration on company’s ERP system to ensure data are up-to-date and properly captured in the system.

· To provide additional administrative support for team members as needed.

· To follow and ensure compliance to company BD&P policies and procedures.

Requirements

· Diploma / Degree in any discipline, preferably in Construction/ Contract Management of Quantity Surveying, Engineering, etc

· At least 3 years of relevant experience in M&E contract administration

· Proficient in Microsoft Office Applications

· Meticulous, proactive and good time management

· Good communication and interpersonal skills

· Good team player with ability to work independently

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Job duties and responsibilities:

• Design new products and continually improve existing products to meet industry standards and customer requirements.
• Develop technical manuals and Instruction Operating Manuals for products, ensuring accuracy and usability.
• Prepare, review, and verify design drawings, detailed specifications, and fabricated drawings for compliance with technical standards.
• Create Bills of Materials (BOMs) and ensure accurate documentation.
• Order materials and supplies; monitor the progress of fabrication and installation to ensure alignment with design specifications and schedules.
• Perform quality control checks to ensure the integrity of materials, components, and final products.
• Update and maintain design records, project databases, and documentation for traceability and reference.
• Track and coordinate the delivery of goods and materials to meet project timelines.
• Collaborate with cross-functional teams, including procurement, production, and project management, to address technical challenges.
• Provide technical support and guidance to the fabrication and installation teams during project execution.
• Identify opportunities for cost optimization, design innovation, and process improvement.

Job Requirements:

• Degree or Diploma in Mechanical, Precision, Tool, and Die Engineering, or a related field.
• At least 2 years of experience as a Design Engineer.
• Proficiency in drafting software such as AutoCAD, SolidWorks, 3D modeling software, or equivalent.
• Experience in Marine Hydraulic Applications, with knowledge of valves and actuators, as well as gear design (e.g., spur gear, planetary gear, bevel gear).
• Understanding of forging, casting, and precision CNC machining processes.

Job Summary:

• Seeking a Senior Marine Engineer with 8-15 years in marine engineering and automation.
• Expertise required in electrical control systems, automation design, and vessel performance optimization.
• Responsibilities include project management, technical troubleshooting, and cross-functional collaboration to meet timelines and project scope.

Key Responsibilities:

• Lead installation, testing, and commissioning of marine automation and electrical control systems.
• Design and optimize electrical schematics, PLC/HMI programming, and control panel design using AutoCAD.
• Oversee vessel performance monitoring and implement operational efficiency strategies.
• Conduct inspections, case studies, and system testing for data accuracy and system functionality.
• Ensure compliance with IMO, SOLAS, and STCW safety protocols.
• Liaise with clients and stakeholders for smooth project execution and issue resolution.
• Prepare and present progress reports documenting each project phase.
• Supervise technical teams, troubleshoot electrical systems, and ensure minimal downtime.
• Manage project documentation including schematics, termination drawings, and progress reports.
• Monitor compliance with industry standards, safety, and regulatory requirements.

Qualifications:

• Degree/Diploma in Marine Engineering or a related field.
• Certifications in AutoCAD, Industrial Automation, CompEx
• Proficiency in AutoCAD, Electrical CAD, PLC programming, and industrial communication protocols (e.g., Modbus, Ethernet).
• Strong project management skills and ability to manage multiple projects.
• Familiarity with MS Projects, CRM systems, and Gantt charts preferred.

Skills & Competencies:

• Marine Engineering & Automation: Expertise in shipboard automation, electrical systems design, and vessel performance optimization.
• Project Management: Proficient in planning, executing, and closing projects; skilled with project management tools.
• Technical Leadership: Capable of leading technical teams and stakeholders to meet timelines and budget.
• Data Acquisition & System Integration: Experienced in optimizing data acquisition and integrating control systems.
• Safety Compliance: Knowledge of maritime safety standards and regulatory compliance.
• Problem-Solving: Effective in troubleshooting and resolving complex technical issues

About Us:
Surbana Jurong Aviation is a premier aviation consultancy firm known for its expertise in aviation-built environment consulting services. With a dedicated team of professionals, we deliver high-quality aviation buildings, facilities, and infrastructure for clients worldwide. We seek a Junior Aviation Engineer/Planner to join our dynamic team.

Job Summary:
As a Junior Aviation Engineer/Planner, you will be vital in designing airport-related buildings, facilities, and infrastructure. The ideal candidate will have a background in civil engineering, proficiency with BIM, AutoCAD, and AviPLAN, and can create precise technical drawings for airside infrastructure and engineering works in airports.

Key Responsibilities:

• Develop and update drawings using AutoCAD.
• Design airfield geometry and markings using AviPLAN.
• Collaborate with planners, engineers, architects, and other professionals to ensure designs meet all project requirements.
• Prepare technical drawings, sketches, diagrams, and specifications.

Qualifications:

• Diploma or bachelor’s degree in civil engineering or related field, or equivalent experience in C&S CAD/BIM design and drawing production.
• Proficiency in AutoCAD; experience with Civil 3D, Revit and AviPLAN is a plus.
• Strong understanding of civil engineering principles, construction methods, and materials.
• Exceptional attention to detail and accuracy in design work.
• Ability to read and interpret technical drawings and specifications.
• Strong organizational skills, with the ability to handle multiple projects simultaneously.
• Excellent problem-solving, analytical, and communication skills.
• Team-oriented with a strong ability to work independently.
• Willingness to travel as required.

Responsibilities:

Prepare Electrical and Instrumentation design documents including:

• Lighting design and calculation.
• Preparation of lighting layout 2D and 3D drawings, Lighting circuit diagram.
• Earthing and Lightning Protection design and drafting of layout, section, and elevation drawings.
• Cable ladder, conduit, trunking, cable routing design. Preparation of 2D and 3D design drawings.
• Cable sizing calculation, prepare Electrical cable schedule
• Prepare material take off (MTO) for material purchase.
• Fire Alarm, CCTV, Card Access, Public Addressing system design, preparation of system schematic and Layout drawings 2D and 3D.
• Preparation of Instrument Location layout drawing
• Preparation of Junction box termination drawings, Instrument Loop diagram
• Preparation of instrument Hook up, typical installation details
• Preparation of instrument cable schedule

Design coordination with internal design disciplines such as Structure, mechanical, piping team for design interface issue

Attend 3D model review and coordination with internal discipline engineers to resolves clashes.

Attend site survey and provide design sketches such as cable routing, support installation details, etc.

Support project tender team for material take-off from client tender documents.

Attend factory inspection for E&I related material such as Fire alarm, CCTV, MCC, PLC system

Support construction site to raise material purchase request, evaluation vendor quotation, preparation of Material approval submission.

Support site testing & commissioning work such as fire alarm system, CCTV System, DCS loop check, etc.

Requirements:

• Minimum Diploma in Electrical or Electronics Engineering.
• 3~5 Year of relevant design experiences
• Fresh graduates are welcome to apply
• Minimum hands-on experience for using design software such as AutoCAD MEP (Electrical), AutoCAD Plant 3D, Navisworks Manage, DIALux.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructure, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking an experienced and highly motivated Embedded Engineer to join our dynamic engineering team. The ideal candidate will be responsible for designing, developing, testing, and maintaining embedded systems for a variety of applications. You will work closely with hardware and software teams to integrate solutions that meet our customer’s needs while ensuring high quality, reliability, and performance.

Job Description

• Design and develop embedded systems and applications based on customer requirements and project specifications.
• Write efficient, optimized code for embedded systems in languages such as C/C++ or assembly.
• Develop, implement, and test embedded software on various platforms (e.g., ARM, or microcontrollers).
• Debug and troubleshoot embedded systems using tools like oscilloscopes, logic analyzers, and in-circuit debuggers.
• Conduct system performance analysis and implement software optimizations to meet power, speed, and resource constraints.
• Create unit tests and integrate automated testing into development processes.
• Document and maintain clear code, designs, and specifications for embedded systems.
• Collaborate with cross-functional teams, including hardware engineers, software developers, and QA engineers, to deliver high-quality embedded products.
• Participate in code reviews, maintain version control using Git, and follow industry best practices for embedded development.
• Stay up to date with emerging embedded technologies and continuously improve the design and development process.

Requirements

• Experience in firmware development on embedded systems using C/C++ and/or assembly
• Knowledge and/or experience in embedded system such as Arm-Linux
• Knowledge and/or experience in porting codes (especially assembly language) from Intel-Linux to Arm-Linux
• Knowledge in information security or networking standards is an added advantage.
• Knowledge in secure boot for NXP i.MX solution is an added advantage.
• Strong problem-solving skills and ability to work independently as well as teams.
• Excellent communication and collaboration skills.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

• Servicing experience on Marine and Offshore deck equipment.
• Intensive knowledge on hydraulic system troubleshooting.
• Hydraulic system modification.
• Knowledge on Low pressure system service and troubleshooting.
• Min knowledge on electical control system and fault finding.
• Service / Troublshoot / Repairing knowledge on marine and offshore cranes and winches.
• Communication / Report writting skills.
• Overseas travel on short notice.
• Attending ship repair meeting / apply permit / Preparation of shipyard entery documents.
• As a team leader.
• Participate in vessel dockings repair work at shipyards.
• Adhoc duties as assigned

MASE E&C Pte Ltd is looking for a Procurement Executive to manage the sourcing, negotiation, and procurement of goods and services essential to our operations. The ideal candidate will ensure cost efficiency, timely delivery, and compliance with company and industry standards while fostering strong relationships with suppliers.

Key Responsibilities:

• Develop and implement effective procurement strategies to meet project and operational requirements.
• Source, evaluate, and negotiate with suppliers to secure cost-effective, high-quality products and services.
• Prepare purchase orders, contracts, and related documentation in accordance with company policies.
• Monitor supplier performance to ensure compliance with agreed terms, quality standards, and delivery schedules.
• Coordinate with internal departments to forecast procurement needs and avoid disruptions in operations.
• Conduct market research to identify trends, new suppliers, and opportunities for cost savings.
• Maintain accurate records of purchases, pricing, and supplier information.
• Manage inventory levels and oversee timely replenishment of stock as needed.
• Resolve issues with suppliers related to quality, delivery, or pricing disputes.
• Ensure adherence to all legal, safety, and environmental regulations in the procurement process.

Requirements:

• Diploma or Degree in Supply Chain Management, Business Administration, or a related field.
• Minimum 2-3 years of experience in procurement, preferably in the construction, marine, or engineering industries.
• Strong negotiation and communication skills.
• Proficiency in Microsoft Office Suite (Word, Excel, Outlook).
• Familiarity with procurement software and inventory management tools is advantageous.
• Detail-oriented with strong organizational and multitasking abilities.
• Ability to work under pressure and meet tight deadlines.
• Knowledge of local and international procurement regulations and standards.

Join MASE E&C Pte Ltd and contribute to our mission of delivering excellence by ensuring the seamless procurement of essential goods and services. Be part of a team that values innovation, quality, and collaboration!

Job Responsibilities:

• Performing all procurement activities including sourcing, pre-qualification, negotiating supplier agreements, preparation of contracts and tender management.

• Developing and implement procurement plans and strategies to support project and business needs.

• Ensuring tender processing time is maintained and facilitate tender and contract negotiations by practicing cost saving strategies.

• Developing strong relationships with business stakeholders and strategic supply partners to improve business.

• Proactively engage and collaborate with business stakeholders to solve operational issues and problems related to Procurement operations.

• Ensuring all activities comply with procurement policy, tender procedures, and finance policy and manual for purpose in providing exceptional customer service .

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer

Internal Code: A24013

What will you do?

• We develop the Smart Nation infrastructure and applications and facilitate collaboration with citizens and businesses to co-develop technologies.
• Join us as we support Singapore's vision of building a Smart Nation - a nation of possibilities empowered through info-communications technology and related engineering.
• Our objective is to catapult our government infrastructure into the new digital era with faster time to market, operational agility, automated deployment and scalability.
• We are an agile development and operations house that is bold, agile and collaborative.
• The team is responsible for designing, prototyping, building and operating different products and services.
• As a Software Engineer (frontend), you will help to level up the team's competency with your valuable past experiences.
• Experiences of failure are just as important as those of success.
• You will drive, implement, deploy, maintain and operate products or key components of your products. You will work closely with different teams to deliver the best possible and impactful solutions.
• If you are looking for opportunities to collaborate with leading industry experts and be surrounded by highly motivated and talented peers, we welcome you to join our team. Make a difference by taking up the key role and be part of the passionate and inspirational team.
• Ownership over feature design and implementation, with a focus on sound technical choices and maintainability. At times, this would be in collaboration with other software engineers.

What are we looking for?

• From 3 - 5 years of relevant experience
• Proficient in JavaScript, TypeScript
• Experience in frontend technologies (HTML & CSS etc) as well as any web framework (React Preferred), understand their design principles and application scenarios; and have good practise and understanding of common web compilation and bundling frameworks, including Webpack/Rollup/Babel/AST.
• Familiar with various front-end related debugging and testing tools, and have independent problem-solving skills
• Contribute in technical discussions and solutioning sessions.
• Possess good coding and documentation habits, pay attention to code style, familiar with basic design patterns and principles, and continuously focus and optimize projects
• Autonomy to drive the direction of the product
• Chance to work on creating developer tooling systems from the ground up, from research all the way to implementation.
• Chance to work with different development teams while enabling them to be more productive at the same time
• Excellent teamwork and communication skills; communicating technically complex ideas to non-technical people effectively is a plus
• Having a growth mindset and willing to share knowledge to grow together with the team
• Enjoy making data driven decisions
• Understand that problems can be solved in different ways, sometimes not with engineering; understand how these solutions can and should be evaluated.
• Willing to learn and own fullstack

If would be a plus if you have:

• Experience in fullstack or backend JavaScript (Node.js)/TypeScript or other backend frameworks
• Experience with automated testing
• Experience with deployments cloud infrastructure such as AWS, Azure, or Google Cloud
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Description:

• Conduct assessments to identify and qualify vendors based on quality, cost, and reliability;
• Draft and distribute RFPs (Request for Proposal) to potential vendors, outlining the specifications and requirements for products or services needed;
• Perform detailed cost analyses to identify optimal procurement options aligned with budget constraints and quality standards;
• Lead negotiations with suppliers to secure advantageous contract terms and conditions;
• Keep procurement activities compliant with internal policies and external regulations;
• Collaborate with the quality control team to ensure the purchased materials meet all necessary quality metrics;
• Oversee the entire ordering process, from initial requisition to final delivery, ensuring timeliness and accuracy;
• Maintain and nurture relationships with suppliers for long-term partnership and potential cost savings;
• Serve as the point of contact between engineering departments and suppliers to clarify technical specifications or resolve issues.

Job Requirements:

• Bachelor's degree in Business Administration, Supply Chain Management, or a related field;
• Certification in procurement or supply chain management (e.g. CPSM, CSCP) is preferred;
• Minimum of 5 years of experience in procurement or purchasing;
• Ability to work independently and manage multiple projects simultaneously;
• Experience in vendor management and supplier relationship management;
• Strong analytical and problem-solving skills;
• Ability to work independently and manage multiple projects simultaneously;
• Negotiation Skills, Strategic Thinking, Communications Skills.

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628