Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

up to 4200

Science Park

* Support start-up, contract maintenance and other service activities with emphasis on safety and protection.

* Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.

* Participate in service and repair of personnel protection equipments, safety activities, emergency response, breakdown calls and ad hoc projects.

* Manage all orders efficiently until fulfilment stage, by working closely with Service team.

* Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.

* Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency.

* To provide support to other service activities that may be assigned in the course of work

* Effective communication of technical information to employees, customers and external parties in an accurate and concise manner in both a written and verbal media.

* To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

How to Apply: Please send your resume to:

Job Description:

• Analyse client needs, scope problems, and develop business cases to address them.
• Document requirements, source, and evaluate alternatives, and recommend suitable solutions that best aligns with specific client needs.
• Collaborate with client and application vendors for solution design and to seek clarification and acceptance.
• Design, develop, and deliver software applications that satisfies customer expectations.
• Improve software quality using XP practices, including code review and unit testing.
• Prepare architectural and other technical documentation.
• Assist Business Analysts with user stories elaboration.
• Support QA teams with test automation and bug fixes.
• Assist DevOps teams with build and release automation.
• Work with Client users to ensure smooth deployment and adoption of new solutions.
• Assess business needs for service requests and the impact of enhancements to the system.
• Evaluate problem resolution approaches and implement effective recovery plans for ICT incidents, establishing processes to prevent recurrence.
• Understand IT management policies, quality management policies, and security guidelines to ensure compliance in development processes.

Job Requirements:

• Degree or Diploma in Computer Science, Computer/Electronics Engineering, Information Technology or related disciplines.
• Prior experience with version control systems such as Git.
• Proficiency in front end technologies such as Angular.
• Prior experience in backend technologies such as Java, Python, Node.js.
• Proven experience in low code application platforms such as Pega.
• Knowledge in one or more of the following processes: agile processes, continuous integration/deployment, cloud/PaaS platforms (e.g., AWS, GCP), serverless frameworks, and container technology like Docker would be an added advantage.
• Prior experience with low code development and wireframing tools such as Figma
• Familiarity with unit testing.
• Additional advantageous traits include being self-driven, independent, strong problem-solving skills, good communication, interpersonal skills, and excellent presentation and listening abilities.
• Hands-on experience with at least one full project development lifecycle in Pega.
• Relevant professional certification in Pega is a plus.
• Prior experience in Agile and UX development environments is an added advantage.
• Advantageous skills include consulting or business analysis experience, knowledge of system solutioning for mid/large-scale projects, understanding of web services, REST APIs, sFTP, and security concepts.
• Extensive experience in defining UAT test scenarios and facilitate SIT and UAT tests.
• Ability to define system interface specifications.

Job Description:

• Analyse client needs, scope problems, and develop business cases to address them.
• Document requirements, source, and evaluate alternatives, and recommend suitable solutions that best aligns with specific client needs.
• Collaborate with client and application vendors for solution design and to seek clarification and acceptance.
• Design, develop, and deliver software applications that satisfies customer expectations.
• Improve software quality using XP practices, including code review and unit testing.
• Prepare architectural and other technical documentation.
• Assist Business Analysts with user stories elaboration.
• Support QA teams with test automation and bug fixes.
• Assist DevOps teams with build and release automation.
• Work with Client users to ensure smooth deployment and adoption of new solutions.
• Assess business needs for service requests and the impact of enhancements to the system.
• Evaluate problem resolution approaches and implement effective recovery plans for ICT incidents, establishing processes to prevent recurrence.
• Understand IT management policies, quality management policies, and security guidelines to ensure compliance in development processes.

Job Requirements:

• Degree or Diploma in Computer Science, Computer/Electronics Engineering, Information Technology or related disciplines.
• Prior experience with version control systems such as Git.
• Proficiency in front end technologies such as Angular.
• Prior experience in backend technologies such as Java, Python, Node.js.
• Proven experience in low code application platforms such as Pega.
• Knowledge in one or more of the following processes: agile processes, continuous integration/deployment, cloud/PaaS platforms (e.g., AWS, GCP), serverless frameworks, and container technology like Docker would be an added advantage.
• Prior experience with low code development and wireframing tools such as Figma
• Familiarity with unit testing.
• Additional advantageous traits include being self-driven, independent, strong problem-solving skills, good communication, interpersonal skills, and excellent presentation and listening abilities.
• Hands-on experience with at least one full project development lifecycle in Pega.
• Relevant professional certification in Pega is a plus.
• Prior experience in Agile and UX development environments is an added advantage.
• Advantageous skills include consulting or business analysis experience, knowledge of system solutioning for mid/large-scale projects, understanding of web services, REST APIs, sFTP, and security concepts.
• Extensive experience in defining UAT test scenarios and facilitate SIT and UAT tests.
• Ability to define system interface specifications.

About i-Consult Tech Pte Ltd (I-Consult)

i-Consult Tech Pte Ltd (I-Consult) - a wholly owned subsidiary of the i-Consult Group HK Limited in Hong Kong -- is one of the leading IOT solution provider in Hong Kong, Macau & Singapore (Asia Pacific) region with the focus to help both Government and Enterprise sectors to select, architect and implement advanced & integrated IOT solutions to empower their business & operation.

i-Consult Group HK Limited is also a member of Cyber World Creations HK Ltd., who established since 2000, being a leading System Integrator providing industrial platform solutions and Design Manufacturing Services (DMS).

I-Consult provides leading edge one-stop-shop IOT solutions of modernized infrastructure, IT security, cloud platform, updated IOT devices and a broad portfolio of IT services that serve the needs of the sectors including education, hotel, residential & health care sectors.

We are committed to deliver top quality services by conforming to important ISO/IEC quality standards backed by our established best practices and effective service management systems and processes.

I-Consult offers an excellent value proposition with its expertise of experienced professionals, and offshore facility with state-of-the-art information technology infrastructure and competent associates at an extremely cost-effective price.

Part Time Systems Engineer

Responsibilities

We are seeking for a resourceful, experienced and committed individual to manage the following:

· Manage and track day to day progress of projects being assigned

· Perform project/application assessments and evaluation

· Assist test team in creating test plans and testing efforts

· Efficiently identifies and solves project/application issues

· Maintain application and project documentation

· Ensure sufficient, standard and reliable systems infrastructure

· Provide standby support for critical systems

· Provide daily IT technical support including system testing, system deployment and operational maintenance.

· Coordination, planning and execution of routine Maintenance job for contract customers.

· Assist with pre-sales and projects including coordinate, monitor and implement IT solutions for customers.

· Any other tasks and/or duties assigned by the supervisor or manager

· Ad hoc duties as assigned.

Requirements

· Possess at least a Diploma, Advanced/Higher/Graduate Diploma in EEE, Communications, Computer Science, IT, Mechatronics or equivalent.

· Min 2 years of project coordination experience

· Min 2 years of experience in coordinating and support IT business processes

· Knowledge in Java.Net and/or mobile development skills advantageous

· Basic knowledge MS-SQL Database administration including data backup, recovery, security and integrity.

· Familiar with Linux and Windows server environment.

· Experience/Knowledge on other database engines (ie. MySQL) will be advantageous

· Knowledge on Web or mobile application development and architecture will be advantageous.

· Strong interpersonal and communication skills

· Able to work independently and under pressure to meet system performance service levels

· Self-motivated with excellent customer service skill

· Able to multi task, work independently and prioritize workloads effectively

· Strong Interest in the field of IT, positive attitude and a willingness to learn

· Possess good analytical thinking and troubleshooting skill.

· Knowledge of RFID preferred.

· Good analytical and problem solving skills on technical level.

· Good teamwork and communication and planning skills

Interested applicants please email your detailed resume stating your working experience, earliest available date, current & expected salary and a recent CV / Resume to info@i-consulttech.com/[email protected]

Job Title: Senior Automation Engineer

Location: Tuas, Singapore

Industry: Pharmaceutical Manufacturing

Employment Type: Permanent

About the Company: Our client is a leading global pharmaceutical company committed to advancing science and delivering life-saving medicines. With a strong presence in Singapore, they are looking to expand their automation engineering team. Join an innovative and fast-paced environment focused on quality, compliance, and cutting-edge technology.

Key Responsibilities:

• Lead the design, development, and implementation of automation systems, ensuring all systems meet operational requirements and regulatory compliance.

• Conduct and oversee the qualification of automated systems, ensuring adherence to Good Manufacturing Practices (GMP), quality standards, and safety protocols.

• Collaborate with cross-functional teams to manage and deliver automation projects on time and within budget. Provide technical leadership during project execution, from design through to commissioning.

• Diagnose and resolve issues related to automation systems, ensuring minimal downtime and maintaining system reliability.

• Ensure all automation documentation, including design specifications, user manuals, and qualification protocols, are thoroughly created, maintained, and compliant with industry standards.

• Identify opportunities for system optimization, process improvements, and automation upgrades. Support innovation in automation technologies to enhance operational efficiency.

• Work closely with process engineers, IT teams, and other departments to ensure smooth integration of automation systems with other plant systems.

Requirements:

• 6-10 years of experience in automation engineering, specifically in the pharmaceutical or life sciences industry.

• Working experience with MES, AMPS & Rockwell Pharma Suite including system design, coding, and troubleshooting.

• In-depth knowledge of automation system design and qualification processes (FAT, SAT, IQ, OQ, PQ).

• Overall 5-8 years relevant work experience in Endpoint Security, EDR / XDR or similar roles required
• Develop, implement, and manage security controls to block and mitigate security threats across the IT infrastructure.
• Understand perimeter and endpoint security solutions and create policies based on specific requirements.
• Evaluate business risks and the control environment to identify weaknesses, then design effective controls.
• Regularly review and adjust existing policies to ensure they remain effective and aligned with the latest security threats and best practices.
• Hands on experience on EDR/XDR or Next Gen AV tools like Carbon Black, Palo Alto
• Experience as a Security Incident Responder or SOC analyst/manager
• Hands on experience in Symantec Endpoint Protection Manager.
• Good in SEP configuration and troubleshooting endpoints.
• Good in SEPM policies configuration SEPM up gradation from old 11.x to 12.x new version.
• Generating AV Compliance Report.
• Threat log analysis and event Monitoring Certificate Management L2/L3 Venafi Trust Platform.
• Sharing reports with stakeholders/clients Endpoint Security L2/L3 Symantec Endpoint Protection.
• Hands-on to Manage Windows Defender ATP capabilities.
• Good knowledge in XDR .
• Should have expertise knowledge on ADR, SCCM configuration, WSUS configuration and AAD configuration.
• To manage AV policy, ASR policy, EDR policy and Firewall policy.
• Hands-on to manage Co-managed devices from console.
• Knowledge to Query Advanced hunting and to create Custom detection rules.
• Knowledge on Next gen Antivirus, EDR, Device Control.
• Knowledge on Threat hunting & Intel, Malware search & analysis.
• Knowledge on Managing and protecting identities in Azure AD.

Contract Strategic Procurement Executive (9 Months Contract)

9am to 530pm, Mon to Fri

Salary wise max 3600 + Prorated completion bonus

• Coordinate regulatory documentation and sample requests - process and tract requests, expedite documents and samples, ensure all requests are fulfilled.
• Prepare assigned administrative duties such as raising QAFs, Sample POs and etc.
• Update assigned purchasing databases such as ICC new codes.
• Coordinate Sample POs - expedite and ensure prompt deliveries of items.
• Assist in maintaining information to the Global Purchasing Database.
• Assist buyers in projects coordination.
• Assist in office administrative duties such as distribution of incoming mails and parcels.

Requirements

• Min Diploma in any courses
• Min 1 year of procurement exp
• Able to start work immediately

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

• Designs, modifies, develops, writes and implements software programming applications and components.

• Supports and/or installs software applications and components.

• Works from written specifications and pre-established guidelines to perform the functions of the job.

• Maintains documentation of process flow. Primary Responsibilities:

• Utilize established development tools, guidelines and conventions including but not limited to Visual Studio, ASP.NET, SQL Server, HTML, CSS, JavaScript, and C#/VB.NET

• Create and deliver data-driven reports.

• Design, code and test software applications.

• Enhance existing systems by analysing business objectives, preparing an action plan and identifying areas for modification and improvement.

• Maintain existing software systems by identifying and correcting software defects.

• Investigate and develop skills in new technologies.

• Create technical specifications and test plans.

• Create new and extend existing operational documentation.

• Work closely with the management related to projects and tasks.

Successful candidates required more than 3 years of experience in a professional capacity and a degree in Computer Science, Information Systems or related field:· ASP.NET· SQL· HTML· CSS· JavaScript· C#/VB.NET

• Well Established Company
• Basic $4000 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Work with both R&D and Operation Managers to kick off improvement projects that aims at cost reduction, yield improvement, Human Resource Management (work along with HR), etc.
• Implement Lean manufacturing principles and best practices to drive process improvements across all production lines
• Develop Production standard procedure or Work Instructions and align these documents with quality management systems requirements
• Prepare and conduct training for Operation teams to ensure up-to-date compliances are practiced consistently
• Identify opportunities for process optimization and implement strategies to improve productivity and efficiency
• Collaborate with the R&D team to introduce new technologies and innovations to our manufacturing process
• Report monthly CI & other assigned KPI performance
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s Degree in Mechanical/Industrial Engineering, with minimum 1 year working experience in manufacturing environment

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Begin your engineering career by enrolling into our 26-month structured Career Advancement Programme (CAP).

This programme sets you on the pathway to become a Accredited BIM Professional for Digital Delivery Management. Your time on our programme counts towards the work experience requirement. Digital skills are crucial in the Built Environment sector. BIM is the way to digitally create and simulate building and infrastructure models before the actual construction.

AcePLP welcomes fresh graduates and mid-careerists from Architectural, Mechanical, Electrical, Civil, BIM, Mechatronics and Engineering with diploma/degree to enrol in our CAP. AcePLP’s 26-months CAP aligns you to the Built Environment career trajectory. It is the most established work-study programme in Singapore with 20-years proven track record of producing thousands of engineering professionals in the Built Environment. CAP Alumni have made valuable contributions in the development and management of digital models for buildings and infrastructure. You will have opportunities to learn on-the-job alongside industry experts and build your expertise after an initial 2-months classroom training with us.

Why Join Us?

We have the most established Work-Study Programme in the Built Environment sector with over 20 years track record.

• An intensive free two-month technical BIM and CAD training will be provided.
• Learn on-the-job as you work across building and infrastructure projects in Singapore with guidance from our experienced Trainers and Resource Managers.
• Build your expertise and widen your professional network with us through our large database of clients, project assignments and alumnus.
• This program counts towards the fulfilment of pre-requisite for the SUSS Bachelor of Building and Project Management and NUS Bachelor of Technology in Engineering, as well as towards the Digital Delivery Management (BIM) accreditation.
• Sponsorship from AcePLP for further studies are available subject to terms and conditions apply.
• Obtain accreditation for your DDM/BIM skills and Specialist BIM Diploma and/or building related Degree after 6 years in the building industry.

Am I an Eligible Candidate?

• Entry level candidates and mid-careerists may apply.
• Strong interest in pursuing a career in the Built Environment Sector.
• Degree/Diploma in Built Environment-related fields: Architecture, Mechanical, Electrical, Civil, Structural Engineering, Green Building & Sustainability, Project or Construction Management and Facilities Management.
• Other qualifications considered: Any engineering subjects, Intelligent Building Technology, Graphic Arts, Visual/Product/Interior Design, Landscape Architecture, Environmental Engineering, Mechatronic, Aeronautical, etc.
• Professionals with prior experience in BIM may request for a skills test to fast-track their development at AcePLP.

You can apply here: https://aces.aceplp.com.sg/apply/nt/

JOB RESPONSIBILITIES:

• Ensure effective project planning and implementation, efficient use of resources, and proper co-ordination and delegation of works to successfully complete project by the contractual deadline and within the budgeted cost
• To lead and mentor the team by setting in place guidelines and procedures, providing advice and supervision
• Identify and resolve operational problems and minimize delays.
• Ensure that organization and government standards on safety are met and ensure customer safety & quality specifications are consistently met.
• Co-ordinate with the clients, sub-contractors and consultants on all project matters
• Familiar with Authority submissions and regulatory requirements
• Ensure site team of engineers, supervisors, foremen and workers comply with client & regulatory requirements
• To assist management in monitoring the effectiveness of the risk control measures
• To recommend appropriate risk control measures to reduce or eliminate the risk identified assessment
• Ensure high Environmental, Safety and Health standards are upheld on site at all times

JOB REQUIREMENTS:

• Candidate must possess at least a Bachelor's Degree in Civil Engineering or equivalent (recognized by PEB).
• At least 8 years of BTO project experiences from piling stage till handover or contract ending.
• Proficient in MS Office and strong knowledge in project management
• Independent, organised with positive work attitude and sense of urgency
• Excellent leadership, analytical, communication and presentation skills
• To be appointed as RP (Recognize Professional), TC (Technical Controller) and technical personnel for BCA registration.
• Accredited with Accreditation of Project Managers (APM) or Construction Professional Accreditation Scheme (CPAS) is preferred
• 5.5 days work week

Production Engineer | HSE | Chemical Industry | Up to $6k | 5 Days | Jurong Island

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $6000
  

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Senior M&E Engineer

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm
Office The Adelphi (City Hall)
Salary: $5000 to $6000

Job Scope

• Generate M&E co-ordination shop drawings.
• Evaluate and resolve M&E problems with consultants and sub-contractors.
• Attend principal meetings with client and consultants.
• Prepare M&E progress report or any other reports required by the client or consultants.
• Collect operational manuals from suppliers / sub-contractors on completion of project for submission.
• Check and ensure compliance with the requirements of ISO 9000, ISO 14001 and OHSAS 18001.
• Collaborate with site engineer to resolve problem and co-chair meeting monthly.
• Propose risk assessments based on tender drawings and documents.
• Develop VCED, including cost-effective solutions for M&E.
• Review M&E work schedules and lead times to create suitable project schedules using Microsoft Project (equivalent) for tender projects.
• Assist in tendering work by proposing appropriate architectural and C&S solutions, including necessary plinths, access panels, structural openings, dog houses, make-good areas, and other related elements.
• Attend site surveys and ensure proper methods of statement and material shifting are in place.
• Review all VOs on-site and evaluate costs based on POs and tender clarifications.
• Collaborate with the Planning and QS Departments on related matters.
• Prepare Tender presentation slides and present M&E-related items to the client during interviews.
• Full M&E functions as designated and not limits to other general assigned duties.

Requirements

• At least 3 years relevant experience

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

• $2000 to $3000 + OT
• Address: Jalan Bukit Merah
• 5 Days 8.30am to 6pm

Requirements:

• At least ITE or Diploma in Electrical / Electronics
• 1 year working experience in installation in the field of People Counting System, CCTV, Electronic Article Surveillance (EAS), Alarm System, Trouble Shooting, PC literate
• Must have Class 3 license
• Knowledge of electrical & electronics

Responsibilities:

• Report to the Asst. Service Manager
• Responsible for project, implementation, installation, testing & commissioning of the system
• To carry out the maintenance works and services according to the maintenance contract.
• To manage and supervise the work progress of each project site by attending regular site meetings, coordinating with appointed sub-contractors of various services to see to ensure that projects are completed on schedule.
• To ensure proper and accurate records and documentations for the repair & servicing
• To standby and attend service calls

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee (Ashley) Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Position title: Sales Engineer
Location: Loyang Way
Working Days: Mon - Fri
Working hours: 830 a.m. to 530p.m.
Salary: $3,000 - $4,500 (depends on experience)

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel:

✅The Supreme HR Advisory Pte Ltd EA No: 14C7279

✅SAMUEL SIAW Reg No: R24124745

Senior M&E Engineer | Up to $6k | 5 Days | City Hall

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm
Office at The Adelphi (City Hall)
Salary: $5000 to $6000

Requirements
At least 3 years relevant experience

Job scope
Generate M&E co-ordination shop drawings.
Evaluate and resolve M&E problems with consultants and sub-contractors.
Attend principal meetings with client and consultants.
Prepare M&E progress report or any other reports required by the client or consultants.
Collect operational manuals from suppliers / sub-contractors on completion of project for submission.
Check and ensure compliance with the requirements of ISO 9000, ISO 14001 and OHSAS 18001.
Collaborate with site engineer to resolve problem and co-chair meeting monthly.
Propose risk assessments based on tender drawings and documents.
Develop VCED, including cost-effective solutions for M&E.
Review M&E work schedules and lead times to create suitable project schedules using Microsoft Project (or equivalent) for tender projects.
Assist in tendering work by proposing appropriate architectural and C&S solutions, including necessary plinths, access panels, structural openings, dog houses, make-good areas, and other related elements.
Attend site surveys and ensure proper methods of statement and material shifting are in place.
Review all VOs on-site and evaluate costs based on POs and tender clarifications.
Collaborate with the Planning and QS Departments on related matters.
Prepare Tender presentation slides and present M&E-related items to the client during interviews.
Full M&E functions as designated and not limits to other general assigned duties.

The Supreme HR Advisory Pte Ltd | 14C7279
Ong Boon Kiet (Travys) | R22104769

Salary: up to $6000

Duration: 3 months

Location: Tuas (Islandwide pickup)

Working Hours: Monday - Friday Office Hours

Job Scope:

• Support and execute data gathering and execution of validations, qualifications and stability studies to support the manager;

• Comply with Quality and HSE procedures when carrying out sampling and QC tests and release.

• Identify OOS, deviations and quality problems

• Review/Approve testing documentation and test records

• Maintain integrity, accuracy and completeness of QC data and records

• Report equipment OOS issues

• Ensure smooth operation of daily team activities

• Performs any other duties as assigned by Supervisor according to business needs

Requirement:

- Minimum Degree in engineering or related courses

- Experience of performing equipment qualification in GMP industry.

- Equipment qualification includes installation qualification (IQ), operational qualification (OQ), performance qualification (PQ).

- knowledge and experience of performing computerized system validation and well aware of US FDA’s 21 CFR Part 11 requirements for electronic record requirements.

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Position title : Vision Software Engineer

Location: Admiralty
Working Days: 5 Day A Week
Working hours : 9:00am - 6:00pm
Salary : $5000 - $8000 (depends experience)

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job Summary:

We are seeking an experienced Software Engineer to join our team, responsible for
designing, developing, and maintaining software applications for vision systems.

Responsibilities:

• Design and develop PC based automated visual inspection systems for our full range of semiconductor equipment.
• Evaluate and feasibility study on the customer’s vision specifications.
• Responsible to integrate any new vision hardware (camera, frame grabber, etc) onto the vision software.
• Troubleshooting and improve the processing time of the inspection.
• Provide technical support to internal and external customers to fulfill the inspection requirements. Change the vision inspection algorithm to improve the inspection capabilities and its performance.
• Be the key driver for continuous improvement plans for new and existing inspection capabilities.
• Coordinate with customer for any new enquiry with sale personnel if needed.
• Work closely with the vision application and optics team members to produce the best inspection result.
• Build and nurture a culture in engineering organization of harmony, quality, ownership, collaboration, continuous improvement and data-driven decision making.

Requirements:

• BS Science Diploma or higher in electrical and electronic, mechanical, or mechatronics engineering or related technical discipline or equivalent practical.
• Technical troubleshooting experience.
• Minimum 3 years in related field.
• Relevant technical work experience including automation machine system troubleshooting.
• Experience working with end customers.
• Understanding semi-conductor manufacturing process, vision inspection settings, machine software settings and configuration or equivalent practical experience.
• At least 3+ years of experience in software development with C#, WPF, Image Processing , Halcon (bonus)

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical
& non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Roles and Responsibilities

• Assist in procurement of competitive new building vessels through research and study of latest vessel design by gathering various information.
• Coordinate internal requirements and create provide tender specifications
• Assist official tender and decision of shipyard
• Assist in providing contract specification and finalizing contracts
• Achieve better designed new building vessels by commenting to approval drawings
• Supervise construction of building of vessels overseas (e,g, Japan, Korea, China, etc.) and submit supervision reports periodically
• Keep abreast of any environmental topics pertaining to technical issues and provide summarized report periodically
• Conduct ad-hoc investigation of technical and environmental issues as directed and provide reports of investigation result
• Assist in organization’s sustainability plan by formation and implementation of effective green strategies which are in line with policies/industrial standards to enable the company to sharpen and maintain mid/long-term competitiveness

Requirements

• Master or Bachelor of Engineering in Naval Architecture or mechanical engineering or equivalent
• 2-3 years of relevant experience in shipyard designer, marine officer (captain or chief officer or chief engineer or 1st engineer), or technical department and/or R&D for container vessels of shipping company
• Strong technical knowledge of engineering in ships
• Good communication and co-ordination skills
• Team player to work across departments
• Candidates with more experience will be accorded with more senior position

We regret that only shortlisted candidates will be notified.

Gantry Associate Engineer (2 years contract renewable)

4 days, 12 hrs rotating shift from 7-7; first few months permanent night shift from 8.30pm-6am

Currently the 4 days shift is spread from Monday to Saturday, 2 days off. Sunday is rotating standby.

Salary: $2700 -$3000

Location: Bedok office

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job scope:

• To perform comprehensive maintenance for system
• To perform site supervision and hands on when required..
• To perform troubleshooting and devise resolution when issues or faults arises.
• To communicate/supervise contractors on safety and work related tasks.
• To execute job related tasks assigned by Engineer/Shift Engineer.
• To complete reports for jobs done.

Requirements:

• Diploma in Mechatronics, Electrical or Electronics
• Willing to work at height (6 meters) on outdoor public road on gantries.
• Experience in electrical and electronic works.
• Class 3 driving license is required
• Experience in basic Microsoft office.
• Understand basic Window system.
• Experience in site supervision work.
• Understand in Mechanical/Electrical/Electronic system
• Able to work in 12 hours rotating shift, first few months will be permanent night shifts

• Manage & attend to specific customers to achieve company sales budget
• Account management for assigned customers
• To support and meet the department objectives and business goals
• Attend to all customer enquiries
• Provide sales forecast to plant for raw materials and production capacity planning
• Work closely with oversea representative for new customers development activities
• Assist in implementing and execute plan in developing new customers
• Provide short- and long-term plan on market demand
• Survey and analyses market information for management

Requirements:

• Degree in any Engineering discipline with 2 years of experience in similar industry
• Outgoing personality and ability to work independently
• Good knowledge of general market information
• Good marketing strategy and analysis
• Strong negotiation, interpersonal and problem-solving skills
• No experience requires if able to meet the above requirement may apply

5 days work week

Electronics Manufacturing Co.

Loyang Area (Designated pick-up point)

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Summary:

• Basic salary up to $4500
• Commission + Variable bonus
• Transport allowances or reimbursement
• 5 days work week @ 8.30 - 5.30pm
• Location: Tai Seng (walkable from MRT station)
• Opportunity to travel overseas
• Sales or engineering experience / background

Key Responsibilities:

• Identify and approach potential clients via cold calling, proposal emails, networking and etc
• Establish and maintain relationships with clients to foster long-term business
• Prepare quotes and proposal tailored to client's needs
• Use knowledge of products and services to recommend solutions
• Coordinate with internal departments to resolve operational issues
• Address customer concerns related to products
• Other ad hoc duties

Key Requirements:

• Min Nitec in Electrical / Electronic engineering or equivalent
• 2 year of sales / engineering experience
• Willing to travel overseas

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845