The key functions of Semiconductor Engineer is to:

• Manage manufacturing process of the products, including technology yield and performance of the products
• Develop test programmes and procedures to ensure the products meet their performance specifications
• Provide advice on aspects of semiconductor process technology and maintain and repair semiconductor equipment
• Design and develop the layout for integrated circuits according to electronics engineerings principles, using software to create design schematics and diagrams

Provide 24x7 support for all Diffusion Wet Equipment Tools and Issues

Task:

• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness..
• Able to coach junior engineers in performing hardware trouble-shooting for daily operations
• Establish Preventive Maintenance (PM) plans for all implant equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Initiate meeting with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives and analyze low yield and WAT issues
• Establish stock levels of essential spare parts and consumables to support equipment maintenance based on forecasted manufacturing volume. Liaise with vendors to minimize / eliminate over-stock or under-stock
• Manage new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production
• Develop continuous improvement and Implement equipment improvement projects to improve equipment efficiency, cost reduction and reliability of equipment
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Set targets, goals, and projects for the section to minimize wafer scrap, equipment cost per wafer, optimize equipment capability and utilization to meet operational needs
• Provide feedback / training to AEs and TAs on their troubleshooting skills, equipment knowledge, decision making, risks assessment
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers
• Self audit and update specifications to meet TS16949 Quality Standard requirements
• Set Expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager. Help the AE or Engineer on their career path development
• Provide long term solutions to address daily issues. Resolve department hardware chronicle issues.
• Create and maintain implant operation SOP and PM OI
• Develop continuous improvement to enhance equipment reliability and cost of ownership, Able to plan implant cost budget

Requirements:

• Degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics / Chemical / Material Science / Material Engineering
• Min 7 years of relevant work experience in Diffusion Wet / Wet Etching Equipment
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

Architectural Engineer- job Posting

Position Overview: We are seeking a motivated and detail-oriented Project/Site Engineer for Architectural and Structural systems to assist in the supervision, coordination, and execution of construction projects. The ideal candidate will play an integral role in managing various site activities, ensuring quality control, and facilitating communication between internal teams, subcontractors, and clients.

Key Responsibilities:

· Assist in architectural system site supervision works, ensuring quality and progress.

· Coordinate project planning, documentation, and execution of works on-site.

· Oversee project works, manpower mobilization, material planning, and ordering.

· Communicate internally with various departments and externally with clients and subcontractors.

· Coordinate and follow-up on project submissions to authorities.

· Produce regular site progress reports and submit necessary documentation.

· Attend meetings and conduct site inspections to ensure quality control.

Additional Responsibilities:

· Manage all aspects of architectural system site works.

· Supervise manpower scheduling and deployment to meet project timelines.

· Ensure the timely completion and quality of subcontractor works.

· Prepare and submit method statements and other required reports.

· Review and monitor architectural and structural system drawings and approval statuses.

· Collaborate with project managers and stakeholders to resolve site issues.

Qualifications and Requirements:

· Minimum 1-5 years of experience in construction projects.

· Strong communication skills and ability to interact with people at all levels.

· Familiarity with project management processes across all project stages.

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Responsibilities

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

Key Responsibilities:

• Provide remote and on-site technical support, including but not limited to, Incident Management and Problem Management

• Escalate incidents, problems, changes to Team Lead, Service Delivery Manager, Account Manager or vendors as per defined business rules, ensuring timely resolution of client service requests

• Liaise with vendors needed to achieve incident and problem resolution.

• Maintain detailed knowledge of clients’ environments, where applicable, by maintaining and updating relevant documentation.

• Provide high levels of customer service and resolving problems/issues with the client in a constructive manner.

• Prepare adhoc reports as required for contractual requirements.

• Contribute to ITIL based processes to ensure successful delivery of services and initiate solutions to improve quality and productivity

• Participate in client presentations when necessary

Job Requirements:

• CCNP or CCIE in Enterprise is required

• Hands-on experience in installation, configuration and troubleshooting of Cisco routers, wireless or switches

• Have some working knowledge of Cisco Routers, Switches, SD-WAN, DNA, Wireless products in addition to Meraki Switch, Router, Wireless products

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines

• At least 3 years of experience in a technical support environment working with Cisco products

• Experience with VMWare NSX and VMWare Load balancers, is an added advantage

• Knowledge of Aruba, Bluecoat, Ironport, F5, Checkpoint, Fortigate or Juniper products is also preferred

• Able to work in a 24x7 and team environment

Job Description:

We are looking for a Mechanical Engineer to assist in site supervision and coordination for a construction project. Key duties include overseeing project execution, managing progress, coordinating with stakeholders, and ensuring quality control.

Responsibilities:

• Assist in system installation and commissioning.
• Coordinate project planning, materials, and manpower.
• Supervise subcontractors and monitor work progress.
• Conduct site inspections and ensure compliance with standards.
• Prepare reports and documentation as required.

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent.
• 1-5 years of relevant experience in construction projects
• Good communication skills and project management knowledge.
• Experience in wafer fabs or pharmaceuticals is a plus.

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

About the team:

The Enterprise Technology team is a diverse and collaborative group of professionals responsible for driving the technological advancements within GXS Bank. We work on cutting-edge projects that aim to enhance the bank's infrastructure, security, and operational efficiency. Our team is at the forefront of innovation, leveraging the latest technologies such as cloud computing, artificial intelligence, and data analytics to deliver exceptional solutions.

About the Role:

The End-User Computing (EUC) Specialist/Engineer will be responsible for managing and supporting the endpoint devices used by GXS Bank employees. This includes desktops, laptops, mobile devices, and peripherals. The role involves ensuring the reliability, security, and optimal performance of these devices, addressing technical issues, and implementing best practices for endpoint management.

Key Responsibilities:

1. Endpoint Device Management

• Oversee the deployment, configuration, and management of endpoint devices (desktops, laptops, mobile devices, etc.).
• Manage and maintain device lifecycle, including procurement, setup, patch management, and decommissioning.
• Ensure devices are compliant with security policies and regulations.

2. Technical Support and Troubleshooting

• Provide first and second-level technical support for endpoint devices.
• Diagnose and resolve hardware and software issues, including connectivity, performance, and application problems.
• Escalate complex issues to higher-level support or external vendors as necessary.

3. Software and Patch Management

• Deploy and manage software applications and updates across endpoint devices.
• Implement and monitor patch management processes to ensure devices are up-to-date and secure.
• Utilize endpoint management tools (e.g., Jumpcloud, Automox, Microsoft Endpoint Manager, SCCM, Intune) for software distribution and compliance monitoring.

4. Security and Compliance

• Implement and enforce security measures, including antivirus software, encryption, and endpoint protection solutions.
• Conduct regular security audits and vulnerability assessments on endpoint devices.
• Ensure compliance with internal security policies and external regulations (e.g., MAS, NIST, CIS).

5. User Training and Documentation

• Create and maintain documentation for device configurations, troubleshooting procedures, and best practices.
• Conduct training sessions for end-users to enhance their understanding and effective use of endpoint devices.
• Develop FAQs and knowledge base articles to support self-service and reduce sup
• port requests.

6. Performance Monitoring and Reporting

• Monitor endpoint device performance and usage metrics to identify trends and potential issues.
• Generate regular reports on device health, support ticket resolution times, and user satisfaction.
• Provide recommendations for system improvements based on performance data.

7. Collaboration and Communication

• Work closely with other IT team members, business units, and external vendors to ensure cohesive support and implementation of endpoint management solutions.
• Communicate effectively with stakeholders to understand their needs and address technical concerns.
• Participate in regular team meetings and contribute to strategic planning for IT services.

Qualifications:

Education: Diploma/bachelor’s degree in computer science, Information Technology, or a related field.

Experience:

• Minimum of 3 years of experience in IT support or endpoint management.
• Hands-on experience with endpoint management tools (e.g., Automox, SCCM, Intune, Jumpcloud).

Technical Skills:

• Proficiency in troubleshooting and resolving hardware and software issues on endpoint devices.
• Knowledge of endpoint management tools for software deployment, patch management, and compliance monitoring.
• Familiarity with scripting languages (e.g., PowerShell, Python) for automation tasks.
• Understanding of IT security practices and endpoint protection solutions.
• Experience with mobile device management (MDM) solutions.

Soft Skills:

• Excellent problem-solving and analytical skills.
• Strong communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Customer-focused mindset with a commitment to delivering high-quality support.

Jason Energy Pte Ltd, a wholly owned subsidiary of Jason Marine Group Limited has significant experience in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised Telecommunication System Integrator in the oil and gas global market, we provide turnkey project systems that covers a full spectrum of services from the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

We are looking for a Project Engineer to prepare, schedule, coordinate and monitor the projects that are being assigned to him/ her. Reporting to the Project Manager in the Project Team, he/ she will

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements:

• Diploma or Degree in Engineering or relevant field
• Proven working experiences as a project engineer
• Project management and organizational skills
• Commitment to exceeding customer’s expectations
• Time management and organization skills

Good to Have

• MS Office Skills
• Microsoft Project Skill
• Dynamic Business Central knowledge will be an advantage
• Negotiation skills

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Reponsibilites

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

Job Description:

The Project/Site Engineer will assist in the supervision and coordination of Electrical & Control systems for construction projects. The role involves monitoring project progress, managing resources, and ensuring quality standards are met. The engineer will work closely with internal teams, clients, subcontractors, and suppliers to ensure timely project execution and compliance with technical requirements.

Responsibilities:

• Supervise and assist in the execution of Electrical & Control system works on-site.
• Coordinate project planning, documentation, and execution.
• Monitor project progress, manpower mobilization, and material planning.
• Liaise with internal teams, clients, subcontractors, and suppliers to resolve issues.
• Conduct site inspections and ensure quality control.
• Manage the preparation and submission of method statements, shop drawings, and other required documentation.
• Report to the Project Manager (PM) or Construction Manager (CM).

Requirements:

• Diploma or Degree in Electrical Engineering or related field.
• 1-5 years of experience in construction projects.
• Strong communication skills and ability to collaborate across departments.
• Knowledge of project management processes.
• Experience in wafer fabs or pharmaceuticals is a plus.

Job Description

• Work closely with external IT vendor, coordinating and supervising all IT related services and work done by external vendors.
• Maintaining and troubleshooting computer systems and network, including cybersecurity.
• Installing and configuring new hardware and application software.
• Conduct applications training for internal stakeholders.
• Tracking and managing IT related problems and issues.
• Address any issues related to ICT security, performance, and applications availability.

Qualifications

• 2+ year work experience with a Diploma/Degree in Computer Science, Information System or equivalent.
• Experience in Microsoft 365 platform. Experience in Microsoft Power Platform is an added advantage.
• Excellent verbal, written, and interpersonal communication skills.
• Excellent analytical problem-solving and critical thinking skills.
• Service oriented and positive working attitude
• Team player, proactive and willing to learn new technologies

Job Responsibilities

• Project coordination and Supervision of ACMV site progress
• Attend site meetings
• Coordination with sub-contractors
• Reporting Project Progress
• any other duties assigned

Job Requirements

• Fresh Graduate Welcome
• Degree in Engineering / Materials
• Working days per week: 6
• Working hours : 0830 - 1730hrs

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

What you will be working on:

● Innovate and Build: Design and develop new, cutting-edge features for WebOrion®,

enhancing its ability to safeguard against web and API vulnerabilities.

● Pioneer AI Security: Research and create advanced modules for our next-gen AI firewall

that defends against AI-driven cyber threats.

● Full-Stack Impact: Manage and maintain databases, APIs, software, servers, and cloud

infrastructure.

● Agile Development: Contribute to an agile lifecycle—coding, debugging, testing, deploying,

and improving software releases.

● Customer-Centric Support: Provide top-notch technical support for our global enterprise

customers.

What we are looking for:

● Bachelor’s or Master’s Degree in Computer Science/ Engineering, Information Technology or

equivalent

● Hands on experience with Docker and programming languages such as Golang or Python.

● Interest in Security for AI. Defending against the next wave of AI attacks.

● Have a good understanding of RESTful APIs, databases, messaging queues, CI/CD tools

and software testing. Experience with Linux command-line and Git

● Able to write and document technical concepts

● Teamwork skills with a problem-solving attitude

● Preferably 1–2 years of relevant experience, though exceptional fresh graduates with

solid internship experience are welcome.

● Must be based in Singapore.

Why Join Us:

• Innovate for Impact: Be part of the team that's building a revolutionary AI firewall to
• defend against AI-driven threats, redefining the cybersecurity landscape.
• Global Exposure: Work with enterprise customers across ASEAN, Europe, and the
• US, gaining valuable international experience.
• Cutting-Edge Projects: Build cool cybersecurity products while working at the nexus of
• web, cloud, and AI security.
• Career Growth: Join a fast-growing company where your contributions make a real
• difference.

Interested applicants, please drop us a note at [email protected] with your CV and cover letter.

Responsibilities

Support engineer to perform daily operation tasks as follow:

• To provide technical support and troubleshooting for end user devices, including but not limited to laptop computers, mobile devices, monitor screen, docking stations, printers, network devices, etc.
• To track, maintain and perform record-keeping of Novo Nordisk IT assets such as laptop, iPhone, iPad, and monitor screen.
• To assist with new employee onboarding by providing necessary devices and access according to Novo Nordisk policy
• Coordinating with local vendors for computer parts replacement, RMA, and warranty claim
• Performing imaging process of Novo Nordisk laptop for Windows 10 and Windows 11 operating systems when necessary
• Other IT-related ad-hoc tasks as assigned
• VIDEOCONFERENCING MAINTENANCE
• Onsite diagnostic support for meeting room video conferencing equipment
• To provide service reports on the findings of issues reported

Requirement / Qualification

• 3 to 5 years’ experience as I.T support engineer
• Minimum – Diploma in I.T or relevant

This role comes with good base salary and attractive bonuses depending on sales performance.

Job Responsibilities

• Provide pre-sales support for a range of CCTV and network technical solutions, including proposal development and technical presentations
• Identify and develop business opportunities with clients, promoting solutions and delivering tailored technical proposals
• Design and deliver competitive product solutions, ensuring alignment with client requirements
• Collaborate with the sales team to ensure client needs are met, and provide technical expertise to drive sales growth
• Build strong relationships with clients, understanding their business and technical needs, and providing timely support for inquiries and technical issues
• Deliver product training to clients, enhancing their understanding and adoption of CCTV and network solutions

Job Requirements

• Proven experience with CCTV products and solutions
• At least 1 year of experience in the CCTV or networking domain
• Excellent communication and influencing skills, with the ability to negotiate and align technical solutions with customer needs
• Strong technical troubleshooting skills, with experience in resolving complex technical issues
• Preferred certifications: CCNA, CCNP, or other relevant networking credentials

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R1332294

Business Registration Number: 201735941W

Licence Number: 18S9037

Essential Duties and Responsibilities

• Responsible for software development lifecycle activities, including system study, analysis, design, code, test, and deployment for product using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS
• Work with project team members to identify product requirements and help define project scope, objectives, and plans accordingly
• Write, analyze, optimize, and debug product application code to maximize performance and quality
• Create automated unit tests and integration tests
• Write and maintain the internal tools to diagnose software component issues, improve productivity of build and release
• Document technical specifications and functional specifications
• Participate in agile planning and scope estimation for team projects
• Mentor and execute in Agile, Lean, and Continuous Delivery best practices

Requirements

• BS/MS in Computer Science/Engineering or related field
• 5+ years of software development experience in user interface application development using JavaScript, TypeScript, ReactJS, Redux, HTML5 and CSS
• Experience in turning designs into responsive UIs with ReactJS /HTML5 / CSS (LESS)
• Experience in leveraging development workflow with tools like npm, webpack and Node.js
• Experience developing in Node.js development
• Experience with design patterns, performance/memory analysis, multithreading
• Agile / Scrum experience including TDD, unit testing, and continuous integration
• Strong analysis and problem-solving skills
• Excellent interpersonal skills including verbal and written communication skill
• Communicates well in English

Bonus

• Experience in WPF/WCF and MVVM programming
• Experience on creating webview2 UWP apps
• Experience in integrating with RESTful APIs

CONSTRUCTION ENGINEER/QS

Islandwide, Contract Full Time

Professional, 5- 10 years exp above

Engineering

$3,500to$6,000

Monthly

Roles & Responsibilities

Responsibilities:

· Manage project management and daily site operations.

· Handling technical and engineering issues.

· Plan the manpower require for the site works.

· Mange efficient utilization of manpower, raw materials, and consumables for our construction projects at construction sites.

· Oversight of the works and resolving any technical issues/ difficulties that may arise on constructions sites.

· Plan the works at construction sites carried out are complying with safe work procedures.

· The Engineering report to project team on work progress at construction sites.

· Full time supervision at site.

· Working on construction site, could accept OT base on site requirement.

· Beside Engineer Work, & some QS work as well.

Requirements:

· Diploma/Degree/ or any BCA Relevant in engineering or equivalent

· Min 5- 10 years of Experience in Construction Engineering field.

· Leadership and organizational Responsible skills.

· Support APM/PM Skills.

· Support CAD/project, drawing and design, and Aluminum Steel Engineering for any construction knowledge.

· Great written and verbal communication skills/in terms of English Languages.

· A willingness to learn/ Hardworking excel Skills.

· Good Communication/ follow the daily instruction for the APM/PM and the site supervisor instruction.

· Hiring 2 Candidate of Construction Engineering.

· Engineer has to write structure steel and metal work

Please apply as following, and regrets only shortlisted will inform.

Thank you.

Email: [email protected]

• Involve revese enginnering based on part given.
• Create the part drawing from the component by measuring and prepare the new cnc program.
• Lead a programmer and machinist to successfully deliver the cam program for precision machined component projects
• Work closely with senior management to prepare quotation and concept dedign for new projects
• Prepare and track schedules for live projects - manage deliverables targets by designers and drafters
• Train and groom new Cnc 3d cam programmer / machinist in company
• Create, maintain and enforce workflow processes to enhance design department efficiency
• Manage team KPIs

The role will consist of a technical component, with a focus on material testing as well as designing new packaging systems. You will perform various types of testing for medical packaging materials and sterile barrier systems (packaging for sterile medical devices). You will design and create prototypes to support new sales growth and customer retention and assist external as well as internal customers with technical projects/package testing and consulting. You will own and manage smooth operation of a technical development center under the supervision of a senior engineer.

Primary Responsibilities

• Perform various types of physical, mechanical, analytical and integrity testing for medical device packaging materials and packaging systems

• Ensure that testing and lab procedures are performed safely. Ensure personal safety and routinely evaluate equipment for potential safety risks

• Design and create package prototypes using 2d and 3d software based on requests / inputs received from sales team. Maintain and control proper inventory of packaging materials, test material and test equipment accessories

• Maintenance of Lab equipment - Write/update work instructions, procedures, calibration instructions and test methods as required

• Liaise and collaborate with the technical team members at other global sites on technical topics and lab related activities

• Liaise and collaborate with external test labs, sterilization partners and contract manufacturing facilities, as required

• Communicate effectively with other Oliver employees both locally and globally

• Identify gaps and constantly strive to update technical capabilities of the Technical Development Center

• Provide expertise in material selection and package design of sterile barrier systems in order to support new sales growth and customer retention

• Occasionally, travel within APAC region to support our customers in the field including trial runs, troubleshooting customer processes and technical sales activities

• Actively support customer’s technical teams on new product introductions and validations

• Support the QA department with technical assessment of CAPA investigations

• Support product change notifications for customers

• Work closely within the Technical team to develop viable packaging solutions

• Qualify/Test new materials as per ISO 11607 – Ensure capability levels through thoughtful analysis and rigorous testing

• Design new products that can deliver Six Sigma process capability levels. Support/Improve existing product portfolio

• Other duties that assigned

Basic Qualifications

• B.S in Packaging engineering, chemical or mechanical engineering preferred. Candidates with a

graduate diploma in a similar engineering discipline may also apply

• 3-5yrs experience in medical device packaging

• 2d and 3d CAD knowledge / experience desired (AutoCAD 2d and Solidworks 3d preferred)

• Ability to stand and perform physical testing required.

• Strong listening ability and patience

• Ability to adapt to different working styles and cultures

• Positive attitude, ability to work under pressure and people oriented

• Strong written and verbal communication skills. Works well with people across the organization

Preferred Qualifications

Interpersonal Skills:

• Comfortable speaking before an audience

• Requires contact with others (face-to-face, by telephone, virtual meetings, VOIP or otherwise) and working and interacting in a group or team

• Ability to read, analyze and interpret data/documents/safety rules or manuals/operating instructions or procedures/maintenance

• Ability to write in a clear and concise manner

• Ability to speak effectively, present information, responds to questions in a clear and concise manner.

Technical Skills:

• MS Office, particularly Word, Excel, PowerPoint and Outlook, Essential Functions

• Knowledge of 2d and 3d CAD knowledge / experience desired (AutoCAD 2d and Solidworks 3d)

Other Skills:

• The ability to predictably and regularly attend work and to be punctual

• The ability to read and understand documents and drawings

• The ability to work cooperatively with others

• The ability to deal politely and professionally with customers and/or coworkers

Special Requirements

Ability to travel 5-10% of the time internationally

Occasional evening / weekend work might be required (e.g. night calls with USA/EU)

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost-effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Industrial Engineer to be part of our Industrial Engineer Department diverse team of talent.

What you will be working on:

• Maintain and improve capacity planning methodologies to ensure accuracy
• To achieve planned mix & capacity through equipment utilization improvement/conversion/other capacity improvement plans to ensure the plans meet operations goals
• Establish layout plans for all production equipment based on operation needs
• Ensure timely equipment installation/release for production to meet operation’s needs
• Initiate Tool-to-Tool Matching (Golden/Lemon) as well as Best-In-Class benchmarking to strie for the best perforamnce of the tools
• Update/maintain tool capacity/productivity database for capacity planning & productivity indices tracking
• Manage capital budget to reflect necessary equipment requirement for capacity mix and new technology introduction
• Establish standard costing methodologies & wkly/qtly/annual standard costing
• Cost management (forecast/tracking/improvement/modeling/analysis/benchmarking)
• People productivity management/coordination
• Initiate/lead/drive continuous improvement projects & Best-Known-Method sharing
• Strategic planning initiatives for capacity expansion, tool/people productivity improvement & cost reduction
• Lead/coordinate people productivity/automation initiatives. Headcount modelling
• Business Continuity Management and Risk assessment
• Enhance current systems, improve methodology & modelling
• Coach/mentor & train new Engineers/Associate Engineers

More about you:

• Degree in Industrial Engineering/ Mechanical/ Manufacturing
• Functional / Technical skills and knowledge: Knowledge in semiconductor processes and IE tools used in the semiconductor industry
• Computer skills : MS Office, MS Access, VBA, SQL, Oracle, Cognos, AutoCAD
• Strong communication and presentation skills
• Team player with strong problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Duties to Perform:

The senior Gas Engineer will work on designing, tendering, and monitoring the installation of bulk gas and special gas systems for industrial properties in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk gases, high-purity inert gases, flammable gases, corrosive gases, hazardous gases, and related distribution networks.

The senior Gas Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, specifications, standards, logistics, and detailed drawings for tender. He or she will review proposals from contractors and continue to support them during installation when required.

The successful candidate will work closely with other disciplines such as architects, civil, cleanroom, electrical, automation, mechanical, and construction engineers, as well as CAD/ BIM designer in designing and delivering the project.

Requirements:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity, and specialty gases and systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing chemical systems will be definite added advantage.

Your familiarity with the Semi standards and Singapore standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage.

You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to work independently.

Able to travel / relocate.