Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Key Responsibilities:

• Carry out implementation activities for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, and qualification of facilities in accordance with site to approved procedures.
• Provides trouble shooting / continuous improvements to processes / systems.
• Maintain high GMP standard meeting the regulatory expectations such that the site is always inspection ready.
• Monitor and enforce compliance measures (including Data Integrity and safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.
• Implementation of the GSK Production System (GPS) for Engineering department.
• Support on shutdown activities and on preventative plant maintenance for various systems at site.
• To support the development of facility master plan to ensure compliance to engineering standards, management of obsolescence and asset replacement.
• Monitor and manage the DCS/PLC systems to ensure constant and reliable support to the plant at all times so as to minimize disruption to the production process.

Skills, Knowledge & Experience:

• Good degree in Controls and Instrumentations - related progream
• Minimum 2 years of Controls experience in the process / pharmaceutical industry
• Experience in Delta V system, especially batch process.
• Experience in SIL calculation and TMR system (Honeywell Safety Manager) will be added advantage.
• Experience in the Siemen PLC system will be added advantage.
• Good understanding of validation process
• Familiar and understanding of Global Engineering Standard (GES) and understanding of industrial standards.
• Basic commercial knowledge & project management skills
• Effective communication & Operational Excellence skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

JOB DESCRIPTION

• Plan and co-ordinate on the project progress and schedule and ensure timely completion
• Attend project meeting and prepare report for project progress update
• Prepare project budget and cost estimation
• Coordinate and plan to achieve project milestones, project deliverables and schedule monitoring
• Manage, control and monitor all project activities such as engineering design, site execution, testing and commissioning of project
• Prepare / review as built iso for claim purpose, follow up with client for any outstanding DO issue
• To prepare progress claim report and submit progress claim documents according to client requirement
• To prepare operations and maintenance manual after project completion
• To coordinate with inter-departments for operations matters (procurement, engineering, group office)

Competency Requirements

• Diploma or Degree in Mechanical Engineering
• At least 3 years of working experience in the related field
• Familiarity with semi-conductor/construction industry
• Proficient in Microsoft Office
• Knowledge of QA/QC procedure (PQR/WPS) will be an added advantage
• Multi-tasking team player with excellent interpersonal and communications skills
• Attended QEHS related awareness training

Job Responsbilities

• Prepare of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Perform technical proposal c/w PFD, P &ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new product technical evaluation

Job Qualifications

• Degree in Chemical/Mechanical/ Electrical Engineering
• Technical knowledge (i.e. Process Design and calculation) in membrane (MF/UF/RO/MBR), Ion Exchange (2B3T, MB, CPU, EDI) and pretreatment processes (coagulation/ flocculation, sedimentation, clarification, filtration)
• Relevant project management / plant testing & comissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details

Please include your current and expected Salary in your resume.

· Provide technical supports before & after sales

· Sourcing, compiling of costing, preparation of proposals

· Reviewing of sales inquiries, tender specifications, drawings etc.

· Corresponding with supplier and customers

· Prepare/submit quotations/proposals after reviewed & approved

· Handle ordering processing

· Reviewing of purchase orders against drawings, specifications, BOM and/or RFQs

· Diploma in Mechanical/Electrical/Mechatronics with experience preferred

· Higher Nitec/Nitec in Engineering with experience are welcome

· Outspoken personality, able to work independently as well as a team player in pressurized environment

· Transport provided in Boon Lay

· Training will be provided

· Work in customer’s site if requires

· Entry level candidates are welcome

· Both genders may apply

· Estimate Monthly Salary : SGD2,500.00 to SGD3,200.00

Job Description:

• Day-to-day customer service and procurement activities - Responsible for managing daily customer service operations and manage entire supply chain process from procurement to distribution to ensure timely and cost-effective delivery of products.
• Demand planning - Work closely with sales and marketing teams to forecast demand accurately.
• Production Planning - Collaborate with Operations team to develop production schedules and optimize the production planning that align with demand forecasts.
• Inventory Management - Work within the team to implement robust inventory control measures to maintain optimal stock levels. Monitor and analyze inventory turnover, taking proactive measures to prevent shortages or overstock situations.
• Logistics Coordination - Coordinate logistics activities, including transportation, shipping, and customs clearance. Optimize transportation routes and methods to reduce costs and enhance efficiency.
• Relationship Management - Build and maintain strong relationships with local and overseas suppliers and customers. Develop good vendor management with warehouse personnel for effective inventory control.
• Licensing - Manage all license requirements for Import/Export & transportation with compliance to Government Authority of Singapore.
• Collaboration and Communication - Work with product management team to review product specification/technical data. Collaborate with quality control teams to ensure that all products meet industry standards and customer specifications.
• Perform any other ad hoc tasks assigned by Team leader / Management.

Job Requirements:

• Degree in Chemistry / Chemical Engineering or any Engineering field.
• Minimum of 2 Years of working experience in a related field.
• Preferably with related experience in Chemical Distribution/ Semiconductor industries.
• Excellent written and spoken communication skills in English and ideally proficient in Chinese (in order to negotiate and handle queries with overseas Mandarin speaking suppliers/vendors in regards with the import & export shipment arrangement matters).
• Hands on experience using SAP/Navision system, strong in Microsoft Office, especially Excel would be an advantage.
• Experience in ISO9001, ISO14001 and ISO 45001.
• Ability to prioritize workload, make systematic decisions under pressure.
• Possess an entrepreneurial ‘can do’ mindset, able to work in a start-up environment.
• Possess excellent interpersonal skills, strong problem-solving skills and sense of ownership.
• Willing to travel if required.

A Day in Your Life at MKS:

As an Application Engineer , you will partner with Sales and Customers to support FEC process activities and improvement.

You Will Make an Impact By:

• Perform characterization study on new products and document the results in customer presentations for marketing purposes
• Presentation of products capability and performance to management and customers
• Provide on-site new process installations (Beta Site Evaluation) at customers for new products de-veloped
• Provide training to customers and applicators
• Support Functional Electronic Coatings (FEC) business in the Far East by processing samples for customers, evaluations/qualifications and conducting lab scale experiments to troubleshoot cus-tomer problems
• Responsible to ensure the FEC Laboratory cleanliness and maintenance through practicing good housekeeping methods.
• Ensure work time is recorded and uploaded into the SAP platform for all projects completed and in-hand.
• Health, Safety & Environment (HSE) Responsibilities: Safety remains our number 1 priority. Making HSE as an integral part of all activities. The successful candidate must agree to comply with our in-ternal HSE & QS policy and other relevant local regulations.
• Other jobs / tasks assigned by the Application Manager and Business Manager
• Travel Requirements : 30% of travel is required

Skills You Bring:

• Degree in Chemistry or equivalent. Masters or PHD in chemistry can be considered.
• Minimum of 3 years working experience in the related function /industry.
• Good knowledge of electrochemistry and surface finishing technology
• Good command in English.
• Good communication and interpersonal skills.
• Candidate should be proactive, highly motivated, goal-oriented and customer-oriented person
• Good communication skills, resilience, good reporting
• Excellent analytical thinking, able to work under minimum supervision and independently, at the same time a highly committed team player.

Job Responsibilities:

1. Team up with chemists to lead a team of lab analysts and technician in executing daily laboratory operations, ensuring compliance with accreditation standards and quality system implementation.
2. Develop and validate analytical methods for the testing of chemical compounds, ensuring accuracy, precision, and reliability. Identify and drive initiatives to enhance laboratory operational efficiency and productivity.
3. Manage laboratory inventory and equipment, including consumables/spare-parts inventory, equipment calibration, troubleshooting, and maintenance planning, to meet quality and operational requirements consistently, ensuring analytical tools are in proper working condition for accurate testing and analysis.
4. Provide support in new product development processes (R&D), analytical metrology, and quality assurance for all products, offering product expertise, providing technical support for new product developments, and addressing technical emergencies.
5. Collaborate with other departments on continuous improvement projects to achieve business objectives.
6. Perform Quality Control (QC) responsibilities, including conducting quality tests, inspections, and analyses to ensure product integrity and compliance with standards and specifications.
7. Investigate deviations, out-of-specification results, and quality-related issues, and implement corrective and preventive actions (CAPAs) as necessary.
8. As quality master to understand product quality, to ensure product to fulfill customer’s requirement.

Job Requirements:

1. Master's Degree in Chemistry with 2 – 3 years relevant working experience in QC lab or a Bachelor’s Degree in Chemistry with 5 – 6 years relevant working experience.
2. Working experience or significant exposure to specialty chemicals or semiconductor wafer fab supplier environments is considered an added advantage.
3. Strong hands-on instrumentation experience such as ICP/MS, GC/MS, UV-Vis, GC/FID/TCD, IC, HPLC, ICP/OES, NIR, and other measurement tools.
4. Excellent written and spoken communication skills in bilingual languages (English and Mandarin) to liaise with English and Mandarin-speaking associates/clients.
5. Hardworking, able to multi-task, and willing to work long hours when necessary
6. Team player with excellent interpersonal skills and a strong sense of ownership with responsibilities to achieve project and business objective
7. Ability to work under pressure, prioritize workload, be systematic, and make sound decisions in a fast-paced environment.
8. Willingness to travel when required.

Scope of job:

1. Installation and Commissioning:

• Install electrical systems, equipment, and machinery as per technical specifications and safety regulations.
• Assist in the commissioning of electrical systems and ensure they are operating correctly.
• Ensure all installations are in compliance with the relevant codes and standards.

2. Maintenance & Troubleshooting:

• Conduct routine maintenance checks on electrical systems to ensure efficient functioning.
• Diagnose faults, troubleshoot electrical problems, and repair or replace faulty components.
• Provide preventive maintenance to avoid breakdowns and optimize system performance.

3. Customer Support:

• Offer on-site and remote technical support to customers, ensuring customer satisfaction.
• Respond to customer queries and resolve electrical issues promptly.
• Provide training and guidance to customers on proper use and maintenance of electrical systems.

4. System Upgrades:

• Assess and recommend upgrades to existing electrical systems and equipment.
• Implement system improvements to enhance functionality, safety, and efficiency.

5. Safety & Compliance:

• Follow all safety protocols, electrical codes, and regulations to maintain a safe working environment.
• Conduct safety inspections and risk assessments on electrical systems and equipment.
• Ensure compliance with local, national, and industry-specific electrical standards.

6. Documentation & Reporting:

• Maintain accurate records of service activities, including repairs, maintenance, and customer interactions.
• Prepare and submit detailed reports on findings, repairs, and service schedules.
• Maintain an inventory of electrical components and tools.
• Monitor progress on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Prepare timesheets and service report upon completion of all works and ensure all document is properly endorsed/verified by customer and uploaded to serve on time.

7. Collaboration & Coordination:

• Work closely with project managers, technical teams, and clients to understand service requirements.
• Coordinate with suppliers and vendors for spare parts and service tools.
• Collaborate with colleagues to ensure efficient and effective project execution.

8. Continuous Improvement:

• Stay updated with the latest electrical technologies, techniques, and industry best practices.
• Attend training and certification programs to enhance skills and knowledge.
• Contribute ideas for improving service efficiency and customer satisfaction.

Required Skills & Qualifications:

· Education:

• A bachelor’s degree or equivalent qualification in Electrical Engineering, Electronics, or a related field.
• Certification in electrical systems or maintenance (e.g., NEC, NFPA) is a plus.

· Experience:

• Proven experience as an Electrical Service Engineer or similar role (typically 5 years above).
• Hands-on experience with electrical systems, wiring, motors, circuit boards, and related components.
• Familiarity with diagnostic tools, testing equipment, and electrical schematics.

· Technical Skills:

• Strong knowledge of electrical systems, circuits, and components.
• Proficient in using electrical diagnostic tools, multimeters, and testing devices.
• Understanding of electrical safety regulations and standards.

· Soft Skills:

• Excellent problem-solving and troubleshooting abilities.
• Strong communication skills (both verbal and written).
• Ability to work independently and as part of a team.
• Customer-oriented with a focus on delivering high-quality service.

Physical Requirements:

• Ability to lift and carry heavy electrical components and tools.
• Ability to work in confined spaces or at heights when required.
• Comfortable working in various weather conditions for outdoor jobs.
• Commissioning, start-up, and testing of mechanical, hydraulic, control system and electric integration system on newly build vessel.
• Recommendation of Spare Parts or solutions to customer during Repair or Troubleshoots Works.
• Constant monitoring of the progress and quality on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Ensure our Equipment’s perform as per requirement and satisfaction of Customer.

Work Environment:

• The role requires travel to client sites for installations, maintenance, and repairs.
• Work hours may vary based on project deadlines or emergency service calls.

Responsibilities:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and clients’ requirements
• Work closely with the Professional Engineers, regulatory authorities and contractors to provide supervision on site, to resolve all site issues and ensure timely completion of the projects
• Implement the site supervision quality and safety assurance system
• To carry out all inspection that is under KTP’s submission, Including ERSS, and specialist work that will need his supervision, whenever required.

Requirements:

• Degree in Civil Engineering recognised by BCA, Singapore
• Must be an accredited Resident Engineer with IES, Singapore, upon successful hiring
• Fresh graduates / Resident Engineers with other specializations are welcome to apply
• Candidates with HDB experience are an added advantage and strong encouraged to apply

Responsibilities for this position include:

• Broad-based, hands on knowledge and experience with various types of instrument and electrical systems, equipment and software
• Troubleshoot electrical and instrumentation maintenance issues and complete appropriate documentation
• Update and archive electrical prints, PLC programs, and operator interface software, necessary for the documentation of projects that have gone into production
• Update and archive electrical prints, PLC programs, operator interface software, necessary for the documentation of projects that have gone into production
• Design electrical control and communication systems for production equipment
• Coordinate the installation of electrical equipment by contractors and plant personnel to meet scheduled completion dates
• Carry out the effective delivery of electrical, mechanical and fabric maintenance to both plant equipment and building equipment on the Client’s sites

Desired experience for electrical maintenance engineer includes:

• Provide technical support to Maintenance for AC and DC electronic drives, Programmable Logic Controllers, and control systems
• Provide cost estimates for new projects and system upgrades
• Develop specifications for projects to assure completion of work on schedule with required materials and workmanship
• Assist Production and Maintenance in the start-up and operation of new equipment and facilities

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Are you up for the challenging next step in your career? Stolthaven’s Asset Management – Projects department is looking for a Project Engineer who responsible for execution of the technical projects (Capex) for the terminals.

As a Project Engineer, you will be the project manager and have responsibility for the engineering and construction of projects, including all relevant project management tasks.

In this dynamic role, your responsibilities range from construction and modification of physical assets to providing engineering support to the Asset Manager in the design and construction of bulk liquid storage facilities and related equipment. Within the local and global Asset Management teams, you will share knowledge & experience on your specific project or engineering discipline expertise and be involved in efforts to train Asset Management colleagues or other Stolthaven functions.

As part of the local Asset Management team, you will work in close cooperation with the MR&I Engineer, Maintenance Supervisors and other roles for developing project cost estimates to existing and proposed facilities in consideration of environmental and customer requirements. The position is also responsible for review and quality control of field construction work, although potentially supported by Construction Supervisors. Implements programs for compliance with all government and regulatory requirement and other technical areas.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Manager. Typically class I & II capex projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate for the execution of the capex program together with (main) contractors and other departments and disciplines
• Prepare Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team
• Responsible for coordination of procurement and or contracting of materials and services for your projects together with Stolthaven procurement
• Governance on quality and legal and or safety requirements during the whole project including execution
• Responsible for commissioning and closing of the project to operations and maintenance and ensure closure of project including timely completing of as-built files
• Responsible for leading change process in case of scope change
• Responsible for safety, quality, progress and cost control and reporting during the project
• Sets priorities and project scheduling for completion of projects within required deadlines
• Provides input to Manager of Engineering as required to complete monthly cost and schedule tracking reports on capital projects
• Supervises contractors in activities related to new construction, modifications to existing facilities and plant repair items
• Responsible for leading project evaluations and Management of Change processes for the projects at hand.
• For larger projects, this role can also be part of a project management team whereas the responsibilities are defined by the Project Manager.

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• o Proactively identifies technical risks in projects and seeks for mitigation
• o Providing assistance in the formation of annual capital budget forecasts
• o Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks.

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, E&IA, Civil or related field

2. Proven track record in an engineering design position, preferably in the field of storage tanks or in a related industry

3. Must be familiar with all applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location. This could include IEC, API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes.

4. Project management experience is preferred field

5. Minimum 5 years progressive engineering experience in terminal or related industry

6. Minimum 10 years progressive experience in terminal or related industry may be accepted in lieu of a degree

7. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

8. Fluency in English and preferably in Chinese (read & write) as the job requires liaising with our Taiwan joint venture

9. Able to build and maintain both internal and external relations on various levels

10. Able to communicate effectively both verbally and in written

11, Proven safety leadership and service mindedness

12. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

13. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

14. Must be computer literate with specific skills in MS Office

15. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

16. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

17. Depending on the required engineering discipline, have knowledge of the following:

• Mechanical: Must have in-depth knowledge of all standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Must be familiar with all standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation
• Affinity with IT network components (e.g. firewall and basic networking setup) and experience with FAT for E&I system, panels, automation, etc.
• Knowledge and experience with reviewing drawings such as P&ID, Single Line Diagram, MCC drawings and other E/I/Automation specifications, calculations and drawings
• Knowledge and experience with ACAD and E-plan drawings
• Experience with trouble shooting E&I installations

18. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Responsibilities:

• Oversee wafer manufacturing to meet quality, yield, and production targets.
• Collaborate globally on process alignment and qualification of new processes, suppliers, and consumables.
• Work with cross-functional teams to enhance process capability and yield.
• Coordinate troubleshooting for process issues and yield losses.
• Drive continuous process improvements and resolve chronic quality issues.
• Develop best practices and innovative solutions for ongoing improvement.
• Conduct statistical data analysis for process improvement and data interpretation.
• Utilize problem-solving techniques (8D, Fishbone, DOE) and risk assessment tools (FMEA).

Requirements:

• Degree in Engineering or equivalent.
• Knowledge of quality management systems, data analysis, DOE, and SPC
• Proficient in statistical software (e.g., JMP).
• Experience with Visual Basic, databases, and queries (preferred).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Under direct supervision, applies functional requirements and uses engineering tools to design electronic circuits or control systems for product changes or new developments
• Uses software tools or applications to analyze and conduct tests on electronic circuits or systems and document performance in comparison with design criteria
• Identifies the testing objectives at a component level per Halliburton's Health, Safety, and Environment procedures and evaluates test results
• Assists in preparing component specifications, follows work processes to document designs, and assists in the preparation of material for design reviews
• Collaborates with mentors to understand the basic content required to submit an invention disclosure and recognizes ideas that have IP potential without disclosing confidential information
• Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions. Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standardsResponsibilities:
• Under direct supervision, applies functional requirements and uses engineering tools to design electronic circuits or control systems for product changes or new development
• Uses software tools or applications to analyze and conduct tests on electronic circuits or systems and document performance in comparison with design criteria
• Identifies the testing objectives at a component level in accordance with Halliburton’s Health, Safety, and Environment procedures and evaluates test results
• Assists in preparing component specifications, follows work processes to document designs, and assists in preparation of material for design reviews
• Collaborates with mentors to understand the basic content required to submit an invention disclosure, and recognizes ideas that have IP potential without disclosing confidential information
• Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions
• Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standards

Key Responsibilities:

• Design, simulation, and implementation of high-temperature electronic systems, encompassing component selection, qualification, and PCB assembly practices
• Functional and qualification testing of the designed PCB boards and sub-assemblies
• Preparation of technical reports and presentations

Requirements:

• Skills acquired through the completion of an undergraduate degree in Electrical Engineering or similar discipline.
• Basic knowledge of various filters, amplifier topologies, and architecture
• Ability to perform simulations to verify designs.
• Basic knowledge of ADC, DAC, LDO, and switching power supply topologies.
• Working knowledge in commonly used circuit simulators, such as LTSPICE, etc.
• Experience in using lab equipment, such as oscilloscope, etc
• Experience in common PCB design CAD tools, such as Siemens PADS, is an advantage
• Experience in MATLAB and LABVIEW is an advantage

Candidates that exceed the minimum job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, job opportunities might be available for the Senior Electrical Engineer role

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities:

• Work closely with customers to understand their current cyber operations and establish their cyber threat intelligence requirements
• Design operational use cases to adopt cyber threat intelligence in their operations
• Lead a development team and chart the product development roadmap
• Develop and customize plugins to adapt with COTS CTI Products
• Assist in training the machine learning model for the Artificial Intelligence (AI) Engine
• Work closely with project team to deliver project which includes system integration and deployment of hardware and software
• Acceptance Testing and Documentation

Job Requirements:

• Good understanding in Cyber Threat Intelligence Workflows, STIX and MITRE Framework
• Experience in working with different CTI Platform available in the market
• Knowledge in Linux OS is preferred
• Experience in Virtualization, Containerization and Network.
• Well verse in Python development and CSS styling is a must.
• Experience in ELK Stack, MinIO, GraphQL, RabbitMQ
• Candidate has a passion for cybersecurity domain
• Good troubleshooting and problem solving skill
• Work location: Jurong East

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 8 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

Job Summary

The Lead Repair Development Engineer, Laser Ablative Technology, is responsible for designing, developing, and optimizing laser ablation processes in cooling holes clearing application. You will be part of AMRT (Advanced Manufacturing & Repair Technology) Breakthrough team and support industrialization of process around the global repair network to deliver quality and productivity, as well as transactional services growth.

Key Responsibilities:

• The focus for this role is to lead to identify, develop, industrialize, and globalize laser ablation processes for cooling holes clearing technology for the services network. This role can affect short-term and long-term business goals.
• Hands-on experimentation to apply and integrate advancements in laser technology to enhance process efficiency and quality
• Recommend approaches to meet the technical and program requirements.
• Understanding of laser system and ensuring compliance with safety standards.
• Identify project, develop, industrialize and globalize cooling holes clearing technology for the services network
• Collaboration with cross-functional teams on development and implement of technology
• Provide technical leadership to other personnel; mentor others in the organization
• Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures
• Monitor and communicate project status, business issues, and significant developments
• Lead or participate in organizational efforts in assigned projects and/or tasks
• Participate as a presenter or reviewer in technical and program reviews

Qualifications/ Requirements

• Bachelor’s Degree in Engineering, Physics, Chemistry, Materials from an accredited college or university
• Minimum of 10 years of manufacturing experience and at least 5 years of experience in Laser technology
• Experience in laser physics and ability to demonstrate a proactive approach to solving complex technical challenges through direct engagement with equipment and processes.
• Basic understanding of robotic concepts and systems, including vision systems and kinematics
• Ability and willingness to travel a minimum 10% of the time, as required
• Able to demonstrate experience in project management and hands on trials
• Strong analytical and problem-solving skills
• Ability to work collaboratively in a team environment
• Good communication and documentation skills

About Us

VFlowTech (VFT) is reinventing energy storage with Vanadium redox flow technology, with a vision to develop the cheapest and most scalable Vanadium redox flow batteries in the world. VFT storage solution has an expected life span of 25 years and is proven to be one of the safest and most environmentally friendly battery technologies. VFT founders have deep experience in the renewable space, and Vanadium redox flow technology. VFT is a spin-off of the CleanTech lab of Nanyang Technological University (NTU), Singapore, and benefits from unique IP arising from many years of intensive research at NTU.

Job Responsibilities

• Develop and conduct research in development of high-power density vanadium redox flow battery stack by designing flow fields, manifolds, material treatment etc.
• Design, model, simulate, test, and characterize vanadium redox flow battery stacks of various sizes.
• Perform material and electrochemical characterization (both in-situ and ex-situ techniques such as cell cycling, CV, EIS, segmented cell, polarization tests, pH tracing, spectroscopy, XRD, through plane/ in plane resistivity, etc.) to reduce the stack resistivity and improve the capability to operate at high current density.
• Project management including project planning, progress tracking, manage resources, and work together with interns, research staffs and international collaborators.
• Develop IPs and Publish in high quality journals.

The work requires an in-depth understanding of electrochemistry of flow batteries, simulation/modelling skills, material fabrication, material characterization tools, and engineering integration of various components of vanadium redox flow battery stacks. The candidate should be able to work on dynamic, product-oriented group and manage the multiple tasks independently. Passion for research and multitasking abilities makes you the head of research group at VFlowTech with additional benefits.

Job Requirements

• Bachelor, Master’s Degree or PhD in Power Electronics, Renewable Energy, or relevant faculty.
• Knowledge about solar/photovoltaic (PV), wind, or fuel cell power generation systems.
• Knowledge of microgrid systems and their interactions with distribution systems.
• Experience in hardware-in-loop modeling and simulations.
• Knowledge of different microgrid control architectures, different control modes of inverter-based resources, droop controls, consensus algorithms and their applications on microgrid load power sharing and voltage regulation.
• Experience in analyzing and modeling the dyanamics of a diversity of distributed energy and emerging grid resources (solar, wind turbine, small hydros, microturbines, energy storage, electric vehicle charging, power flow controller, etc.)
• Ability to provide engineering specifications and electrical drawings, to conduct field testing and troubleshooting.
• Extensive knowledge of industry standards, and government regulations.

Desired Skills and Experiences

Power Generation, Cell, Troubleshooting, Written English, Modeling, Electrical, Estimates, Structural Engineering, Simulations, Renewable Energy, API, FEED, Soil, Manufacturing, Electronics, Design Management

Your benefits

· Receive support in your own self-development (regular feedback and coaching sessions, access to personal development material, workshops, start-up presentations, and networking events)

· Make key decisions that impact the future of the company

· Enjoy regular team lunches and social events

· A secured employment in a constantly growing company and a future-proof industry with a multitude of personal development opportunities

· Work in an environmentally conscious company - we see climate action as a responsibility

· Competitive remuneration package

· Dental and Medical Benefits

Our company culture

Our team is diverse, international and shares the drive to make a difference and create change.

· We encourage our team to bring in their ideas and take initiatives that make them proud of

· We foster a rapidly scaling working environment with a very entrepreneurial, innovative and collaborative culture

CYSREN was established to address these concerns through multi-disciplinary research and development around cybersecurity, leveraging NTU’s core competencies in Engineering, Exact Sciences, International Studies and Business, among others.

We have a dedicated core team that uses its domain expertise and global experience while leveraging on NTU’s vibrant research culture and comprehensive R&D infrastructure to deliver state-of-the-art R&D projects. We engage with local as well as global agencies and industry partners to develop capabilities for a number of areas of strategic importance including:

• cyber worthiness of autonomous vehicles
• cyber risk management, advanced threat intelligence
• secure-by-design for IoT and policy
• governance of cybersecurity

For more details, please view https://www.ntu.edu.sg/cysren.

We are looking for a Research Engineer to contribute to advancing research in software security and source code auditing. The role will focus on developing and applying Large Language Models (LLMs) to detect logic bugs and vulnerabilities in software systems, ensuring the reliability and security of critical software systems.

Key Responsibilities:

• Conducting research on the development of an LLM-based code auditing agent to identify vulnerabilities and improve code quality in software systems.
• Developing tools to identify and analyze the business logic of software applications, ensuring alignment with functional requirements.
• Building and maintaining a comprehensive vulnerability database for software systems, cataloging known issues and patterns for further analysis.
• Writing high quality paper based on results.

Job Requirements:

• Bachelor's degree in computer science, cyber security or related field.
• Familiarity with common software vulnerabilities, static program analysis and large language models.
• Good written and oral communication skills.
• Proficiency in at least one programming languages for static analysis; building LLM-based agent systems.
• Good publication on static program analysis and LLM for security.

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• 5 days, Tuas, Transport provided
• $4000 - $5500 basic salary, AWS, performance bonus
• Allowances, career growth
• Good learning environment

Main Purpose of Role:

Responsible for the installation, commissioning, testing, and servicing of equipment throughout its lifecycle. Ensure the delivery of high-quality, fit-for-purpose equipment and services while meeting client expectations.

Responsibilities:

• Diagnose problems or malfunctions in equipment, assess service requests, and perform technical interventions such as repairs, maintenance, or replacements.
• Carry out commissioning and testing of installations or components in line with project requirements, protocols, and safety regulations.
• Ensure seamless field service operations by handling technical, logistical, and administrative tasks. This includes documentation management, planning, and communication.
• Perform disassembly and assembly of equipment, including physically intensive tasks. Engage in machining activities such as drilling, sawing, or welding.
• Adhere to health and safety standards while ensuring project timelines and goals are met.

Requirements:

• Possess a Degree in Electrical Engineering
• Candidates with minimum 1 year of relevant experience
• Candidates with no experience can apply. On-the-job training is provided
• Prior experience in equipment servicing or manufacturing is an advantage
• Client-oriented mindset, Strong planning and organizational skills
• Progress monitoring and follow-through
• Adaptability in dynamic environments
• Effective problem analysis and resolution
• Self-motivated, team player, and able to work independently
• The role involves physically demanding tasks and may require travelling to client sites

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Responsibilities:

• Prepares engineering information required for the production departments and to execute activities within schedule.
• Coordinates interdisciplinary and subcontracting activities where required.
• Reviews supplier / sub-contractors design deliverables.
• Prepares project documentation for submission and for production works using PLM
• Prepares design and production drawings such as main cable routings, cable tray layout, cable schedules, electrical diagram and etc.)
• Coordinates with other engineering team members (i.e. within shipyard engineering department, production, QC, etc.), subcontractors and consultants on technical issues
• Prepare outfitting material and electrical fittings for vessel to project technical requirement specifications
• Prepares arrangement and bill of material for outfitting and equipment supports for the procurement.
• Provides updates to production and project team members on all aspects engineering deliverables to support yard’s fabrication and installation activities

Requirements:

• Diploma in Electrical or Mechanical Engineering or any other related engineering disciplines
• Minimum 2 years of working experience in Electrical and Instrumentation design and/or engineering in the oil and gas industry
• Experience in electrical related design and marine vessels added advantage
• Proficient in engineering office software and CAD tools such as AVEVA or equivalent
• Able to work overtime where project has requirement.

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm