Task and Responsibilities

• Read and understand technical specifications, prepare job-list, work schedule, plan material take off and manpower planning of yard men and contractor for each given jobs. Report department head and update any special materials for specific project (if require more lead time or needs to purchase from overseas)
• Advance planning man and materials, including all facilities.
• Generate, Control and monitor department budgets.
• Order the material required as per material take off and co-ordinate with purchase department for timely delivery of the materials
• Cooperate with project manager on appropriate procedures and schedule to complete the job.
• Ensure safety, discipline and welfare for all subordinates.
• Carry out trade work as per specifications and to the satisfaction of the owner/class & timely completion. Ensure good quality work as per work instructions. Ensure all trade work mark-up drawings to be made and approved by owner’s representative
• Maintain good housekeeping and Safety at all times on board vessel & workshop. Ensure all workers follow safe work procedures at all times
• Responsible for minimum wastage of materials and balance material to be accounted and returned to store at the end of the project.
• Prepare, setup and review department documents (RA, SOP, Internal & External auditing, OR) with supervisor and manager
• Lead group of supervisors, fitters and sub-contractors.
• Ensuring optimum work processes and equipment utilization.
• Understand all jobs given supervise and give detail instructions to subordinates and contractors report to department engineer or department head.
• Ensure all work completion reports will be done by Ship in-charge, verify & submit to owner Rep to get sign before handing over to commercial department on time (before vessel delivery)
• Monitoring vessel daily job deployment report to achieve target on time.
• Perform other related jobs as assigned by DH.
• Ensure Permit to work system is followed strictly.
• Identify parts and components needed for repairs or replacement and to liaise with regional vendors for replacement of critical spares for vessels.

Job Requirements

3 years and above of relevant experience in ship building & Ship repair industry.

• Possesses in depth knowledge on Marine Machinery Works.
• Able to speak and write in proper English.
• Self-initiative and motivated individual.
• Possesses quality leadership skills to lead and supervise people under their charge.
• Able to give constructing advice based on their qualified experiences.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer

Internal Code: A24013

What will you do?

• We develop the Smart Nation infrastructure and applications and facilitate collaboration with citizens and businesses to co-develop technologies.
• Join us as we support Singapore's vision of building a Smart Nation - a nation of possibilities empowered through info-communications technology and related engineering.
• Our objective is to catapult our government infrastructure into the new digital era with faster time to market, operational agility, automated deployment and scalability.
• We are an agile development and operations house that is bold, agile and collaborative.
• The team is responsible for designing, prototyping, building and operating different products and services.
• As a Software Engineer (frontend), you will help to level up the team's competency with your valuable past experiences.
• Experiences of failure are just as important as those of success.
• You will drive, implement, deploy, maintain and operate products or key components of your products. You will work closely with different teams to deliver the best possible and impactful solutions.
• If you are looking for opportunities to collaborate with leading industry experts and be surrounded by highly motivated and talented peers, we welcome you to join our team. Make a difference by taking up the key role and be part of the passionate and inspirational team.
• Ownership over feature design and implementation, with a focus on sound technical choices and maintainability. At times, this would be in collaboration with other software engineers.

What are we looking for?

• From 3 - 5 years of relevant experience
• Proficient in JavaScript, TypeScript
• Experience in frontend technologies (HTML & CSS etc) as well as any web framework (React Preferred), understand their design principles and application scenarios; and have good practise and understanding of common web compilation and bundling frameworks, including Webpack/Rollup/Babel/AST.
• Familiar with various front-end related debugging and testing tools, and have independent problem-solving skills
• Contribute in technical discussions and solutioning sessions.
• Possess good coding and documentation habits, pay attention to code style, familiar with basic design patterns and principles, and continuously focus and optimize projects
• Autonomy to drive the direction of the product
• Chance to work on creating developer tooling systems from the ground up, from research all the way to implementation.
• Chance to work with different development teams while enabling them to be more productive at the same time
• Excellent teamwork and communication skills; communicating technically complex ideas to non-technical people effectively is a plus
• Having a growth mindset and willing to share knowledge to grow together with the team
• Enjoy making data driven decisions
• Understand that problems can be solved in different ways, sometimes not with engineering; understand how these solutions can and should be evaluated.
• Willing to learn and own fullstack

If would be a plus if you have:

• Experience in fullstack or backend JavaScript (Node.js)/TypeScript or other backend frameworks
• Experience with automated testing
• Experience with deployments cloud infrastructure such as AWS, Azure, or Google Cloud
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Objectives of the position:

This role involves Customer Quality Support for LAP’s product distribution, addressing customer feedback and product quality requirements/issues. The person in this position will be responsible for handling customer feedback or requirements, such as complaints, test data, and other technical information as requested. This includes necessary communication with all stakeholders (Customer, Supplier, Customer Service, Production Planning, Supplier Management, Logistics).

Knowledge in cable testing or Electrical & Electronic (E&E) product testing, along with an understanding of technical specifications, will be required to comprehend customer complaints (both technical and logistical) and provide appropriate advice for resolution.

Key Responsibilities:

Manage Customer Complaint Processes

• Acknowledge the complaint
• Update the complaint in SAP & Customer complaint log
• Track the complaint & close the complaint once actions are completed
• Summarize complaints for monthly reporting (LOS & Q-reporting)
• Properly handle customers' needs by providing accurate and timely information on inquiries related to cable standards, test reports and complaint handling

Track Supplier Quality

• Conduct incoming inspections when required or prompted by customer complaints
• Update results in the SAP system and release inspected lots according to the defined usage decision
• Generate Supplier Corrective Action Requests (CAR) and track corrective actions by liaising with the supplier

Compliance with Standards

• Familiarize with and comply with international cable testing standards and procedures
• Contribute to achieving company and department KPIs through due diligence, duty of care, and personal accountability for quality assurance in all tasks

Liase with Stakeholders

• Effectively close customer complaints by liaising with relevant stakeholders

Maintain Records

• Maintain records in SAP and other relevant records

Operate Laboratory Test Equipment

• Operate laboratory test equipment when required for the validation of complaints

Assist with Customer Technical Enquiries

• Assist with product test reports, RoHS, REACH, and CE inquiries

General Assistance

• Assist in other day-to-day activities related to the QA department as assigned by your superior

Skills & Qualification:

• Min. Diploma in Engineering (Electronics / Electrical) or equivalent
• Min. 1 year of experience in electrical / electronic product testing and qualification
• Knowledge in ISO 9001: 2015 QMS standard will be added advantage
• To be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).
• Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage
• Good written and communication skills in English
• Good customer handling skills and able to communicate to all levels in the organization
• Proficient in Microsoft Words, Excel & Power point
• Addresses present issues immediately and independently
• Possess self-confident and willing to share opinions and expertise in discussions
• Anticipate potential problems and takes action to avoid crisis
• Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Job Summary:

• Salary range : $4500 - $5500
• Working Days and Hours: Monday - Friday (8.30am - 6pm)
• Location of work: Somerset
• 1-month completion bonus upon completion of full year contract

Job Responsibilities:

• Responsible for conducting feasibility studies, market/customer needs analysis and financial analysis for electricity, utilities and related businesses. Specifically, the duties include:
• Conducting feasibility studies (Technical) of domestic and overseas projects/ investments, including economic (cost-benefit) analysis, project/ investment appraisal and project risk analysis
• Perform technical specifications review
• Provide engineering support for future developments of the group
• Participate in regulatory and statutory approval matters
  
  Requirements:
• Candidate must possess at least a Bachelor's Degree in Engineering (Electrical, Chemical, Mechanical)
• Minimum 5 years of relevant experience in Engineering/ Construction/ Oil & Gas industry
• Strong interpersonal communication and coordination skills

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON,

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Foo Kai Jing (Fiona)
Registration Number: R2199329
EA License No: 06C2859 (MCI Career Services Pte Ltd)

Nanyang Technological University’s ANT Group – NTU Joint Lab is a collaboration between ANT International and NTU. The partnership will explore privacy-preserving methods for large language models (LLMs) and will be overseen by a joint research committee.

We are looking for a Research Engineer II to involved in research and development collaboration with industry, on AI Safety and Trust Technology, especially on the topic of applying fully homomorphic encryption in privacy-preserving machine learning. The successful applicant is expected to be familiar with fully homomorphic encryption and its applications in AI models.

Key Responsibilities:

• Research and development of trust technologies such as privacy-preserving machine learning which are important components of digital trust platforms.
• Be involved in privacy-preserving machine learning and fully homomorphic encryption system development and implementation.
• Assist in preparation of reports and scientific papers.

Job Requirements:

• Master’s degree in computer science, mathematics, information theory or related field
• Participation in privacy, security, and trust related conferences and journals
• Good programming skill, preferably with experience in implementing cryptographic algorithms.
• Be familiar with the following programming languages: C/C++
• Good communication skill, self-motivated, and could deliver under tight schedule

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Supervise/perform fault diagnosis, trouble shooting and maintenance of power system/component in workshops and onboard vessels
• Liaise with various departments within company and client to expedite the scope of work
• Lead a team of electricians in corrective and preventive maintenance
• Prepare work completion reports for Customer’s Acceptance.
• Perform maintenance works in accordance with vessel safety requirement
• Conduct in-depth troubleshooting of electrical connections and Programmable Logic Controllers (PLC) programs.
• Coordinate with vendors and partners, conduct design reviews with customers, and maintain documentation according to our ISO quality systems.

Requirements:

• Diploma in Electrical Engineering
• 2-5 years of relevant experience in the Marine related or Oil & Gas industry
• Candidate with no experience may apply
• Experienced dealing with 440V Main switchboard, Distribution Boards, Transformer, Power Generator, Main Engine, Converter, Inverter Batteries, Fire alarm & flooding system and Ship Control Monitoring & Management System
• Experience in troubleshooting on various brands of PLCs (Panasonic, Omron, Allen Bradley, Siemens, Mitsubishi, ABB, etc.) is advantageous
• Proficient in selection and integration of sensors, pneumatic systems, Stepper and Servo Motors & control systems, Power Supply Units, other electrical hard wares, etc.
• Possess man management experience in leading up to 6 men, including Supervisors and Technicians
• Willing to work as a team player to achieve assigned task within given timeline.
• Comfortable with report writing
• Able to work onboard vessels and at heights

• Other Information:
  Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer

Internal Code: A24121

What will you do?

• Build prototypes to demonstrate technology opportunities
• Design system architectures
• Write production quality code
• Manage deployments to cloud and (occasionally) on-premise infrastructure
• Learn and share knowledge in a multi-disciplinary team

What are we looking for?

• Experience with modern web applications in JavaScript (ES 5/6) is a must-have
• Experience in creation/maintenance of APIs using Node.js is highly advantageous
• Experience in front-end development with React.js is highly advantageous
• Experience in automated testing using JavaScript testing frameworks/libraries such as Karma, Mocha, Chai and Sinon is highly advantageous.
• Experience with database management/usage (both relational and non-relational), and handling of data in different environments is highly advantageous.
• Experience in feature testing using a Selenium-based framework is a nice bonus.
• Experience in tooling processes for modern web applications using Webpack and Gulp is a nice bonus.
• Experience in using Docker containers, development of CI/CD pipelines, and deployment using cloud services such as AWS/PasSes/your own private servers is a nice bonus.
• Experience in the software development lifecycle in an Agile context is a plus point.
• Experience in Scrum is a plus point.
• Passion for creating products
• Keen sense of learning and self discovery
• Willingness and capability to impart knowledge
• High level of self awareness
• Ability to self manage
• Growth mindset
• Minimum 2 years experience (or equivalent level of skill/confidence) with modern web applications using JavaScript.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness.

Smart Virtual Systems (SVS) Group is seeking a highly motivated Senior or Lead Research Engineer to implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges. We are seeking a talented and experienced Software Engineer with experience in MLOps/AI to join our dynamic team. In this role, you will play a key role in software development and focusing on deploying machine learning models, implementing MLOps best practices. You will closely work with our cross-functional research teams to streamline model deployment, improve scalability and reliability of systems.

The key roles and responsibilities include the following:

-Develop, test, and maintain enterprise system and applications, with a focus in ML/AI systems.

-Implement MLOps best practices to automate model training, deployment, and monitoring processes.

-Optimize and Implement machine learning algorithms and deep learning architectures.

-Collaborate with data scientists and software engineers to integrate machine learning solutions into existing systems and deliver high-quality software products.

-Optimize AI pipelines for scalability, reliability, and better performance.

-Conduct performance analysis and optimization to improve model efficiency and accuracy.

-Stay updated on the latest advancements in software engineering, AI/ML technologies and best practices.

Job Requirements

-Bachelor or Master's Degree in Computer Science/Engineering or relevant Disciplines

-Must have a minimum of 8 years of experience as a Software Developer/Engineer

-Hands-on experience in Cloud Native Technologies such as in micro-services, DevSecOps, and Containerization Technologies

-Proficiency in designing and developing microservices and software systems using C# .NET, Python and angular

-A good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.

-Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)

-Can do attitude and happy to interface with multiple stakeholders

-Excellent troubleshooting, follow-through, and problemsolving skills, with attention to detail

-Excellent verbal and written communication skills

-Familiarity with deep learning architectures and natural language processing (NLP) techniques.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scopes & Responsibilities

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Lead and participate in technical transfer activities and cross-functional meetings
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints
• Effectively manage and work with project CQV team to ensure timely delivery of projects
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications
• Responsible for investigation of deviations, development of corrective and preventive actions and implementation of change controls in a timely manner
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo
• Benchmark equipment performance (e.g., reliability, productivity) and determine improvement plans
• Periodically review and/or improve equipment safety, maintenance strategy, spare parts, and other continuous improvement opportunities to enhance reliability
• Responsible for management and oversight of team of CQV engineers
• Develop the best team by coaching and mentoring engineers to develop their technical competency and leadership skills

Qualifications

• Doctorate degree in Engineering OR
• Master’s degree in Engineering and 4 years of directly related experience in a pharmaceutical manufacturing site OR
• Bachelor’s degree in Engineering and 8 years of directly related experience in a pharmaceutical manufacturing site
• Able to work independently with minimal of no supervision
• Experience in managing various stakeholders expectations related to process equipment in biopharmaceutical
• Good communications skills, both oral and written, including presentation skills
• Good interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Strong analytical skills and knowledge of industry trends to identify potential improvement opportunities. Ability to combine technical problem-solving skills with business acumen to determine best business solution
• Working knowledge of biopharmaceutical processes such as chromatography, buffer / media tanks, viral filtration, tangential flow filtration is preferred. Process knowledge on inoculation, bioreactors, harvest, single use technologies and critical utilities will also be considered
• Experience in validation processes such as generation/execution of Installation/Operation/Performance qualification documentation
• Knowledge in Automation systems and processes such as RD’s, Delta-V, BMS, ladder logic and PLC
• Demonstrated project management skills (schedule/cost development, facilitation, collaboration, basic project management, completion and follow-up) and application of concepts
• Problem solving skills requiring the application of scientific and engineering theory and calculations and creative skills in the development of hypotheses and approach
• Flexibility to work off-hours
• Knowledge of Total Productive Maintenance, Reliability Centered Maintenance concepts is an added advantage

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness.

Smart Virtual Systems (SVS) Group is seeking a highly motivated Senior or Lead Research Engineerto implement highly available and scalable microservices-based applications and platforms for autonomous manufacturing applications. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges. We are seeking a talented and experienced Software Engineer with experience in MLOps/AI to join our dynamic team. In this role, you will play a key role in software development and focusing on deploying machine learning models, implementing MLOps best practices. You will closely work with our cross-functional research teams to streamline model deployment, improve scalability and reliability of systems.

The key roles and responsibilities include the following:

-Develop, test, and maintain enterprise system and applications, with a focus in ML/AI systems.

-Implement MLOps best practices to automate model training, deployment, and monitoring processes.

-Optimize and Implement machine learning algorithms and deep learning architectures.

-Collaborate with data scientists and software engineers to integrate machine learning solutions into existing systems and deliver high-quality software products.

-Optimize AI pipelines for scalability, reliability, and better performance.

-Conduct performance analysis and optimization to improve model efficiency and accuracy.

-Stay updated on the latest advancements in software engineering, AI/ML technologies and best practices.

Job Requirements

-Bachelor or Master's Degree in Computer Science/Engineering or relevant Disciplines

-Must have a minimum of 5 years of experience as a Software Developer/Engineer

-Hands-on experience in Cloud Native Technologies such as in micro-services, DevSecOps, and Containerization Technologies

-Proficiency in designing and developing microservices and software systems using C# .NET, Python and angular

-A good understanding of CI/CD Pipelines in a distributed environment using Git, Artifactory, Jenkins, SonarQube, Docker registry, etc.

-Hands-on experience with deploying and managing microservices using container orchestration platforms (on-prem/public cloud)

-Can do attitude and happy to interface with multiple stakeholders

-Excellent troubleshooting, follow-through, and problemsolving skills, with attention to detail

-Excellent verbal and written communication skills

-Familiarity with deep learning architectures and natural language processing (NLP) techniques.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

1. To assist Production Manager on production planning and implementation

2. To take charge of the essential oil production section to meet production targets

3. To upkeep production equipment with regular maintenance plan

4. To liaise with Shipping Department on local & overseas delivery arrangements

5. To maintain ISO 9001’s QMS, SOPs, and related documents

6. To conduct Internal Quality Audit, and liaise with external ISO auditors

7. Any other administrative duties as assigned by Production Manager

Requirements:

1. Diploma/ITE/O level

2. Minimum 1~2 year experience

3. Positive working attitude with good interpersonal skills and matured personality

4. Meticulous and ability to work independently

5. Good PC knowledge and proficient in the use of Words, Excel, and Powerpoint

6. Bilingual in English and Mandarin to liaise with associate

Five and a half working days from 8.00 am to 5.30 pm during weekday and 8.00am to 12.00pm on Saturday.

Take bus number 79 or 246 from Boon Lay MRT (10 minutes bus journey)

We thank all applicants for their interest - please note that only shortlisted candidates will be notified.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Summary

Responsible for engineering activities in product improvement/engineering projects; performs engineering analysis, equipment and process set up, carry out risk assessments and validations as well as production implementation for completed projects.

Job Responsibilities

• Participate in product improvement/engineering projects, and responsible for engineering activities.
• Take the lead in problem solving and action planning in project management.
• Perform risk analysis (FMEA) to define process flow and control plan.
• Perform equipment qualification and process validation for product improvement/engineering projects.
• Provide technical advice and guidance to junior engineers and other departments.
• ·Ensure projects are implemented in line with the schedule and budget.
• Optimize new/improved process parameters to further improve product quality and the overall equipment effectiveness.
• Explore new process to improve product quality or productivity.
• Be responsible for the successful transfer of new/improved process/methodologies into the production with good process margins and inline controls.
• Involved in hands-on execution of manufacturing operations.
• Provide operational training for operators or related personnel.
• Manage administrative duties as well as ad-hoc projects assigned by immediate superior.

Job Requirements

• Minimum a Bachelor Degree in Mechanical/Industrial/Manufacturing/ Biomedical Engineering related disciplines or equivalent.
• Good mechanical or material aptitude and knowledge.
• Good experience of manufacturing process and cGMP manufacturing.
• Experience of operational management and lean manufacturing.
• Clean room/environment control experience.
• At least 2 years of working experience in the related field.
• Excellent English-speaking & writing skills
• Multi-lingual: Chinese (Mandarin) to liaise with Mandarin speaking counterparts, other languages are an asset
• Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry.
• Ability to write professional reports, business correspondence, and procedure manuals.

Work Location

36 Jalan Tukang

Singapore 619266

Job Responsibilities:

• Supervise all engineering works, restricted activities civil, architectural, electrical and mechanical works carried out by the Contractors/SWCs etc
• Liaise with QP(s) for technical issues and coordinate the site activities with subcontractors
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.
• Attend all meetings with Stakeholders such as Authorities, Subcontractors, etc
• Prepare Monthly Progress Report
• Ensure site safety and compliance to Authorities' requirements

Requirements:

• Candidate must possess at least Bachelor's Degree in Civil Engineering Recognised by the PE Board
• At least 5 Year(s) of working experience in construction of civil and structures for LTA/MRT Projects
• Availability for Night Shifts: Candidates must be able to work during night shifts.
• Required Skill(s): Registered engineer
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

1. Responsible for SI/PI signoff of chip design, package design and PCB design.

2. Responsible for modeling high speed I/O and PDN.

3. Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

1. Responsible for product electrical specifications related to high speed I/O.

2. Responsible for modeling and simulation of EMC issues.

Requirements:

Experience/Skills:

1. 10+ year working experience in SI/PI

2. Deep understanding in electromagnetic theory, transmission line theory and microwave theory

3. Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation

4. Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding

5. Hands on with lab equipment including high speed oscilloscope, spectrum analyzer and network analyzer

6. Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.

7. Skilled in data processing with script in Python, Matlab or other language.

8. Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.

9. Good communication skills and team work.

10. Education: MS/PhD

Scope of Resposibilities

· Report directly to the Project Manager.

· To ensure high levels of client satisfaction.

· Present, Technical drawing and advise to current and potential clients

· Identify and resolve client concerns.

· Assist with the coordination of shipping schedules and delivery of products and services.

· Attend team & technical meetings

· Maintain accurate records of all activity reports.

· Work closely with the sales team to secure orders

· Adhere to all company policies, procedures and business ethics codes and ensures that they are communicated and implemented within the team.

· Assist sales to come out with design proposal during commercial phase

· Coordination with Client and vendor for project handing from start to end

· Commissioning on board vessel are require to attend

. Fresh Grad

Job Responsibilities

• Design, deploy, and maintain cloud-based infrastructure using AWS or Google

Cloud.

• Ensure compliance with asset management regulations in relevant countries.

• Monitor and optimize cloud resources for performance, cost, and security.

• Collaborate with cross-functional teams to develop and implement cloud

solutions.

• Troubleshoot and resolve cloud-related issues promptly.

• Develop and maintain documentation for cloud infrastructure and processes.

• Stay updated with the latest cloud technologies and best practices.

• Managing cloud environments in accordance with company policies and security

guidelines.

• Developing, deploying and debugging IaC code (Cloud formation and Terraform).

• Interacting with users, providing cloud support, and making recommendations

based on user needs.

• Employing exceptional problem-solving skills, with the ability to see and solve

issues before they snowball into problems.

• Educating teams on the implementation of new cloud technologies and initiatives.

• Regularly reviewing existing systems and making recommendations for

improvements.

Job Requirements

• Bachelor’s degree in Computer Science, Information Technology, or a related

field.

• 3-7 years of experience in cloud engineering, with a focus on AWS or Google

Cloud.

• Experience in the financial services industry.

• Strong understanding of cloud security, networking, and cost management.

• Knowledge of DevOps practices and tools.

• Familiarity with asset management regulations in countries where UOB Asset

Management operates.

• Experience with infrastructure as code (IaC) tools such as Terraform or

CloudFormation.

• Proficiency in scripting languages like Python, Bash, or PowerShell.

• Excellent problem-solving skills and attention to detail.

• Strong communication and collaboration skills.

Relevant cloud certifications (e.g., AWS Certified Solutions Architect, Google

Cloud Professional Cloud Architect)

- Prepare and submit technical documents, drawing and procedures to client.

- Involved with site inspection and commissioning at client premises (local or oversea shipyard).

- Manage,plan and monitor project schedule to meet contractual delivery. To ensure high levels of client satisfaction.

- Assist project manager to liaise with client and consultants on projects.

- Plan, coordinate and monitor orders and deliveries.

- Monitor in-house fabrication works to ensure compliance with approved drawing.

- Support sales team to prepare technical proposal.

- Attend technical meeting.

- Adhere to ISO Procedures and standards.

- Fire-fighting system integration experience is a plus.

- Diploma/ Degree in mechanical Engineering

- AutoCAD skills & basic computer skills (Microsoft Office - Word, Power point and Excel).

- Is a good team player and is analytical and a problem solver.

A Project Engineer, or Project Management Engineer, is in charge of planning and coordinating technical engineering initiatives to make sure they can complete a project within their budget and according to a schedule. Their duties include upholding project standards by researching compliance regulations, developing project implementation plans and adjusting specifications for elements of a project.

Project Engineer duties and responsibilities

Project Engineers manage the planning and processes of a project and delegate responsibilities to ensure the project is completed efficiently and successfully. Their day-to-day duties and responsibilities may vary depending on the type of industry, company or project they’re working on, but typically include the following:

• Conduct regular meetings with clients to ensure clarification and meet specific requirements in a timely manner.
• Delegate tasks to team members according to their individual skill sets, experience and abilities to ensure efficient completion of the project.
• Maintain budgets and make adjustments according to needs as they arise.
• Track performance and analyze the completion of key goals.
• Document and report project progress to collaborators and clients.

To manage and coordinate the production of quality shop drawings and BIM models in all projects assigned with minimal supervision. He/ She must be able to carry out HVAC/piping-related drawings.

• To produce 2D drawings from BIM models with accuracy ensuring drawings produced are according to the Project or the Client’s Drafting Standards and Procedures, and that the drawing submission schedule is achieved.
• Maintain proper records of all issued & received models/drawings, Clash Reports, RFIs, etc.
• BIM Register following the company’s ISO Standards and Procedures and ensuring all the drawings are completed on schedule or promptly.
• Perform regular drawing backups and housekeeping work in the directory
• The secondary role includes developing technical plans, sections, details, and 2D/3D schematic diagrams using AutoCAD and in-house software.
• Accountable for the fluent/organized presentation, content correctness/accuracy of shop drawings production in form, fit, and function through thorough coordinates with other trades and services in 2D/ 3D submission.
• Responsible for ensuring full compliance with the company’s Shop Drawings Standard Operation Procedure, including adherence to design provision/scope of work according to contractual obligations.
• Generate a clash report based on the Matrix provided
• Work under the supervision of the Project Manager and perform the work tasks assigned.

Experience / Skills

• Degree/ Diploma in Mechanical Engineering or other relevant disciplines.
• Preferably with a minimum of 2 years of working experience in space planning, and design coordination, preferably on different scales of projects within engineering design consulting business.
• Having good knowledge of software such as Revit, and AutoCAD.
• Knowledge in Isometric drawings, LOD 350, and Plant 3D will be added advantages
• Good planning skills in managing modeling and drafting work.
• Possess strong initiative, and ability to work independently and within a team environment when required.
• Good interpersonal, written and verbal communication skills.

We regret that only shortlisted candidates will be notified.

Job Description

• Supporting the Power Plant to meet the contractual, technical and commercial set-up and operation.
• Prepare the scope of works for electrical services, specifications of spare parts for the maintenance work.
• Maintain and updated all the drawings, data and maintenance record for all electrical equipment and plant utilities in Power Plant.
• Ensure the proper preventive, corrective and condition-based maintenance (including emergency situation) carried out for all electrical equipment and plant utilities in the Power Plant.
• Perform technical evaluation on external service engagement and material purchase.
• Assist in preparation of the annually maintenance budgetary cost on electrical equipment and plant utilities.
• Provide necessary guidance and advice to maintenance staff to ensure the quality maintenance is carried out as per good engineering practice.
• Ensures that subordinates are adequately trained and recommends necessary training.
• Ensure PPE are provided, and subordinates are utilizing it by executing works with all safety precautions.
• Ensure all Power Plant jobs executed are in line with statutory requirements of concerned authorities and power plant policies and procedures.

Job Requirements

• Possess a Bachelor Degree in Electrical Engineering
• At least 3 years of relevant working experience in Power Plant Maintenance ideally on a CCPP
• Involvement in technical aspects of Power Plant maintenance
• Experience in the erection, testing and commissioning, and initial start-up phases of a modern Power Plant
• Knowledge on electrical system including installation, troubleshooting, routine inspection and maintenance
• Knowledge on electromagnetic rotating equipment
• Knowledge on protection relays
• Knowledge on electrical equipment, i.e. GIS, MV/LV switchgear, transformer, generator, Automatic Voltage Regulator, Uninterruptable Power Supply, VFD, DC System-Battery and charger, HVAC, Communication System, etc
• Knowledge on control circuitry of power plant electrical system
• Knowledge in maintaining maintenance record in CMMS

Job Description & Key Responsibilities:

We are seeking a talented Product Engineer to join our innovative solar technology team, focusing on the development and optimization of perovskite thin-film solar modules. This role combines materials science expertise with manufacturing process optimization to advance our next-generation solar technology.

* Lead the development and optimization of perovskite solar module manufacturing processes

* Design and execute experiments to improve module efficiency, stability, and scalability

* Analyze production data and implement process improvements to enhance yield and performance

* Collaborate with R&D teams to transition new technologies from lab to manufacturing scale

* Develop and maintain product specifications and process documentation

* Troubleshoot technical issues in the manufacturing process and implement solutions

* Work with suppliers to qualify materials and establish quality control protocols

* Ensure compliance with safety protocols and environmental regulations

Qualifications Requirements

* Bachelor's degree or Master in Materials Science, Chemical Engineering, or related field

* 3+ years of experience in thin-film solar technology or semiconductor manufacturing

* Strong understanding of perovskite materials and solar cell physics

* Proficiency in characterization techniques (XRD, SEM, UV-Vis spectroscopy)

* Knowledge of statistical process control and Design of Experiments (DOE)

* Experience with scaling up laboratory processes to production

Preferred Qualifications Requirements

* Direct experience with perovskite solar cell fabrication and characterization

* Knowledge of international solar industry standards (IEC, ASTM)

* Experience with automated manufacturing systems and process control

* Background in failure analysis and reliability testing

* Programming skills for data analysis (Python, R, or similar)

* Experience with clean room operations

* Project management experience

Technical Skills Requirements

* Excellent technical skills on Thin-film deposition techniques, materials characterization, process optimization and quality control

* Able to handle data analysis and statistical methods

* Familiar with Clean room protocols and safety and environmental procedures

Personal Qualities and Communication Requirements

* Strong analytical and problem-solving abilities

* Excellent communication skills

* Detail-oriented with strong documentation habits

* Ability to work effectively in cross-functional teams

* Innovation mindset with practical implementation skills

* Results-driven with a focus on continuous improvement

What We Offer

* Opportunity to work on cutting-edge solar technology

* Competitive salary and benefits package

* Professional development opportunities

* State-of-the-art research and manufacturing facilities

* Collaborative work environment

* Potential for patent development and publication

Job Type

* Full time, up to 20% overseas travelling for supplier and customer site visits