• Report to the Head of Department at basis level and to the Lead Electrical Engineer at project level.
• Implement Company work processes, procedures and quality policies as required by project.
• Review Company contractual requirements, scope boundaries and support the Lead Engineer with the Management of change on assigned areas.
• Manage interfaces with equipment and package suppliers to comply with technical requirements, specifications and Client’s Basis of Design, Standards & Project Specifications.
• Ensure that that all risks related to his/her area or responsibility are identified, assessed and preventive measures are implemented in a timely manner when required.
• Support the Lead Engineer on verification activities as required by the verification body / classification society or other applicable approving authorities.
• Represent the Electrical Engineering discipline during meetings, audits, verifications, workshops and technical reviews and be responsible for an effective and timely resolution of identified issues.
• Provide technical support related to Electrical activities at the fabrication site, whenever required.
• Ensure the technical integrity of all Electrical Engineering activities and deliverables for work performed through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements.
• Continuously seek to improve working methods, tools and procedures and contribute actively to the Electrical Engineering Discipline development and experience transfer.
• Perform any other duties as assigned by supervisor.

Work experience requirements:

• Must have minimum 12 years of work experience in medium/large sized brownfield and/or greenfield projects in the Upstream Oil and Gas / Wind energy sector and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.

Qualifications:

• Bachelor’s degree in Electrical Engineering.

Other skills:

• Prepared electrical philosophies and specifications for electrical systems for concept, FEED, and detail engineering projects as necessary.
• Experience in electrical power system design and handling of power system studies.
• Dimensioning and calculation of electrical networks (High and Low voltage).
• Prepare Technical Requisitions for electrical packages like High and Low voltage switchgear, Transformers, Bulk materials etc.
• Input and Follow up of vendor documentation.
• Participate during Factory Acceptance Test (FAT)/Site Acceptance Test (SAT).
• Perform electrical calculations like cable sizing, lighting and heat tracing using relevant software’s.
• Client liaison regarding technical clarifications and queries.
• Co-ordinate electrical design within own discipline and on a multidiscipline level.
• Administration of tags in EIS (set up, define control objects, link to activity, data input etc.).
• Cable administration in relevant database like cabSys, AVEVA.
• Familiarity with Equinor systems (STID, STID TAG, procosys, Stidele, cable routing, SAP) will be a distinct advantage.
• Produce new and revise existing documentation and drawings in accordance with project document schedule.
• Assist in preparation of bulk material MTO.
• A good understanding and knowledge of oil and natural gas industry standards including but not limited to IEC, NORSOK, DNV and other relevant standards related to Electrical Design and Engineering.
• Computer literacy in MS Office.
• Effective technical communication (verbal and written) skills with proven ability to present technical issues to design teams, client, technical authorities and verification bodies.
• Effective interpersonal skills and ability to work well with people at all levels.
• A self-starter who can work independently, make sound decisions, analyses problems and provide focused solutions.

We regret that only shortlisted candidates will be notified.

Summary

The Apple Services Engineering (ASE) team is one of the most exciting examples of Apple's long-held passion for combining art and technology. These are the people who power the App Store, Apple TV, Apple Music, Apple Podcasts, Fitness+ and Apple Books. And they do it on a massive scale, meeting Apple's high expectations with dedication to deliver a huge variety of entertainment in over 35 languages to more than 150 countries. These engineers build secure, end-to-end solutions. They develop the custom software used to process all the creative work, the tools that providers use to deliver that media, all the server-side systems, and the APIs for many Apple services. Thanks to Apple's unique integration of hardware, software, and services, engineers here partner to get behind a single unified vision. That vision always includes a deep dedication to strengthening Apple's privacy policy, one of Apple's core values. Although services are a bigger part of Apple's business than ever before, these teams remain small, nimble, and cross-functional, offering greater exposure to the array of opportunities here.

Description

As an SRE at Apple, you will work on world-renowned internet services that serve hundreds of millions of users worldwide. You’ll collaborate closely with development teams and other stakeholders in the entire lifecycle of services from inception through deployment and continuous refinement. Your responsibilities will include monitoring performance and availability, capacity and disaster recovery planning, defining Service Level Objectives (SLO) and ensuring the reliability and resiliency of systems. Join us if you thrive on solving large-scale problems through your expertise and collaborative team work.

• Support and lead cross functional projects across multiple services - Design, analyze and troubleshoot complex mission-critical distributed systems on a global scale.
• Provide OnCall support to 1st level production support teams.
• Participate in incident management and blameless postmortems.
• Detect and resolve performance bottlenecks, enhance service efficiency.
• Write clear technical documentation, production run books.

Apple is an Equal Opportunity Employer that is committed to inclusion and diversity. We also take affirmative action to offer employment and advancement opportunities to all applicants, including minorities, Women, protected veterans, and individuals with disabilities. Apple will not discriminate or retaliate against applicants who inquire about, disclose, or discuss their compensation or that of other applicants. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Minimum Qualifications

• BS degree in computer science or equivalent field with 5+ years or MS degree with 3+ years experience, or equivalent.
• At least 5 years in a Site Reliability Engineering, DevOps or infrastructure focused role
• Excellent written and verbal communication skills
• Experience in supporting internet-facing production services and distributed systems
• Experience in collaborating effectively across organizations, building strong relationships
• Proficient coding experience with Python or similar scripting languages
• Experience with containers and container orchestration platforms such as Docker and Kubernetes
• Experience with monitoring tools such as Splunk, Grafana, and Prometheus
• Demonstrated ability to deliver results on time with high quality
• Experience in managing and scaling distributed systems in a public, private, or hybrid cloud environment
• Experience in debugging Java code and optimizing JVM performance is plus.
• Understanding of the Linux Operating System, standard networking protocols, and components

Preferred Qualifications

• Passion for crafting and building reliable systems
• Strong sense of ownership and integrity proven through clear communication and collaboration
• Automation advocate - you truly believe in removing operation load with software
• Excellent troubleshooting and problem solving skills

ROLE DESCRIPTION SUMMARY

A Systems Engineer (Solutions)interfaces with customers and identifies their needs. A Systems Engineer (Solutions)with then work with various departments from network engineers, support and operations to ensure a plan is in motion to improve the customer's experience. A Systems Engineer (Solutions)works to balance various aspects of the project, from safety to design. Additionally, a Systems Engineer (Solutions)researches advanced technology regarding best practices in the field and seek to find cost-effective solutions.

Performs a subset of the system engineering activities required to develop a solution or product.

Analyses the customer’s and other stakeholders’ needs whatever the used means (e.g. advanced studies, simulations, mock-ups, models, prototypes, …)

- Describes the missions, functions and requirements on the sub-system

- Formalises the specification and the architectural design to develop the sub-system

- Prepares and performs the solution or product integration, verification and validation tests.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSystem Engineer, you are accountable to:

• Perform the engineering requirements analysis
• Provides required technical documentation:
• Design Documents (Preliminary, Final)
• Statement of Works for suppliers and external contractors
• Input/output requirement for Interfaces Management
• Input for specialty engineering: RAMS, EMC/EMI, Cyber-Security.
• Input for Installation Management
• Operation and Maintenance documentation
• Training material
• Assists the bid team to scope and cost engineering work packages
• Work with contractors to produce costing, ensure that they deliver on time
• Reports and follow-up the KPIs for the sub-system
• Participate to progress meetings
• Analyse and Correct the Problem Changes Requests

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

QUALIFICATIONS

• Tertiary qualification in Computer Science, Information Technology, Electronics Engineering or related discipline (essential)
• Higher degree qualifications are desirable.
• Demonstrated engineering competencies required for qualification to INCOSE CSEP (or equivalent, or ASEP) are highly desirable.

ESSENTIAL EXPERIENCE

• Minimum of 5 years’ experience in an Engineering role
• Able to decipher technical scope from high level requirements
• Experience with Governmental and/or complex IT Projects
• Strong oral and written communications skills.

DESIRABLE EXPERIENCE

• Experience working on Software Security projects
• Experience working within a Systems Engineering lifecycle
• Knowledge of Thales Products and Processes
• Membership of relevant professional organisation, e.g. INCOSE, Institution of Engineers Singapore, etc.

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Key Responsibilities:

• Top monitor project resources, budget, schedule and scope of work
• Provide technical expertise on site to troubleshoot and propose the best solution for our clients
• Conduct preventive maintenance to ensure optimal performance of equipment.
• Propose and recommend improvement projects to clients to upgrade existing equipment performance.
• Attend to site installation, equipment breakdown and servicing, and emergency requests from client
• Collaborate with cross-functional teams to deliver exceptional after-sales support to our clients
• Utilize your technical know-how to identify, diagnose and repair complex issues efficiently.
• Other ad-hoc duties

Qualifications:

• Must possess a minimum Diploma in Engineering (Mechanical / Electrical / Automation) or equivalent.
• Minimum 3 years relevant experience required and knowledge related to electromechanical control & automation.
• Programming skills and understanding in PLC & Robotic Control.
• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Travel, often on short notice, to customer sites to resolve problems or support other team members.
• With class 3 driving license.
• Regional travel experience.

• Report to the Head of Department at basis level and to the Lead Electrical Engineer at project level.
• Implement Company work processes, procedures and quality policies as required by project.
• Review Company contractual requirements, scope boundaries and support the Lead Engineer with the Management of change on assigned areas.
• Manage interfaces with equipment and package suppliers to comply with technical requirements, specifications and Client’s Basis of Design, Standards & Project Specifications.
• Ensure that that all risks related to his/her area or responsibility are identified, assessed and preventive measures are implemented in a timely manner when required.
• Support the Lead Engineer on verification activities as required by the verification body / classification society or other applicable approving authorities.
• Represent the Electrical Engineering discipline during meetings, audits, verifications, workshops and technical reviews and be responsible for an effective and timely resolution of identified issues.
• Provide technical support related to Electrical activities at the fabrication site, whenever required.
• Ensure the technical integrity of all Electrical Engineering activities and deliverables for work performed through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements.
• Continuously seek to improve working methods, tools and procedures and contribute actively to the Electrical Engineering Discipline development and experience transfer.
• Perform any other duties as assigned by supervisor.

Work experience requirements:

• Must have a minimum 8 years of work experience in medium/large sized brownfield and/or greenfield projects in the Upstream Oil and Gas sector and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Experience in electrical power system design and handling of power system studies.

Qualifications:

• Bachelor’s degree in Electrical Engineering.

Other skills:

• A good understanding and knowledge of oil and natural gas industry standards including but not limited to IEC, NORSOK, DNV and other relevant standards related to Electrical Design and Engineering.
• Effective technical communication (verbal and written) skills with proven ability to present technical issues to design teams, client, technical authorities and verification bodies.
• Effective interpersonal skills and ability to work well with people at all levels.
• A self-starter who can work independently, make sound decisions, analyses problems and provide focused solutions.
• Prepared electrical philosophies and specifications for electrical systems for concept, FEED and detail engineering projects as necessary.
• Dimensioning and calculation of electrical networks (High and Low voltage).
• Prepare Technical Requisitions for electrical packages like High and Low voltage switchgear, Transformers, Bulk materials etc.
• Input and Follow up of vendor documentation.
• Participate during Factory Acceptance Test (FAT)/Site Acceptance Test (SAT).
• Perform electrical calculations like cable sizing, lighting and heat tracing using relevant software’s.
• Client liaison regarding technical clarifications and queries.
• Co-ordinate electrical design within own discipline and on a multidiscipline level.
• Administration of tags in EIS (set up, define control objects, link to activity, data input etc.).
• Cable administration in relevant database like cabsys, AVEVA.
• Familiarity with Equinor systems (STID, STID TAG, procosys, Stidele, cable routing, SAP) will be a distinct advantage.
• Produce new and revise existing documentation and drawings in accordance with project document schedule.
• Assist in preparation of bulk material MTO.

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skill

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

1. Conduct lab-based research and perform experiments.
2. Collaborate with colleagues both inside/outside the group.
3. Assist in daily lab management duties.
4. Present and report research results and publish scientific results in peer-reviewed journals in a timely manner.
5. Ensure compliance with environment, safety, health and quality program requirements from all levels (e.g. university, faculty of engineering and the department of MSE).
6. Translation and commercialization. Training will be provided

Job Requirements

A bachelor and a master degree in Chemical Engineering, Material Engineering or related field is required. The candidate should have 2-3 years of experiences in doing research.

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:

As a SoC Design Verification Engineer, you will be you would be part of a passionate team developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C co-simulation, to mixed-signal simulation and formal verification. You will be part of the Singapore team in developing high performance MCU chips.

• Develop detailed verification plans based on design specifications and architectural requirements.
• Create and maintain test benches for complex digital designs using System Verilog and UVM (Universal Verification Methodology).
• Write, debug, and execute test cases to verify functionality, performance, and power consumption of our SoC products.
• Collaborate with design engineers to identify, analyze, and resolve design issues.
• Conduct coverage analysis and drive verification closure to ensure all functional requirements are met.
• Mentor junior verification engineers, providing technical guidance and support.
• Continuously improve verification processes and methodologies to enhance efficiency and effectiveness.
• Participate in design and verification reviews, providing constructive feedback and recommendations.
• Stay updated with the latest industry trends and advancements in verification techniques and tools.

Your Skills and Experiences:

• Education：Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Experience: 5 years+ prior industry experience of design verification including significant System Verilog and UVM usage.
• Technical skills:

-Deep knowledge of digital logic design, SOC architecture and microarchitecture

- Proficient in simulation-based verification methodologies and languages such as UVM and System Verilog

- Skilled in developing and maintaining test benches, test cases, and verification environments

- Experience across the full verification cycle from initial planning to final tape out

• Preferred skills:

- Knowledge of low-power design techniques and verification methodologies.

- Knowledge of hardware-software co-simulation mixed-signal verification techniques.

- Knowledge of gate level simulation methodologies.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

JOB DESCRIPTION

We are looking for highly-motivated and skilled programmers to join us in Biomed DAR (BII A*Star), to work on a new initiative in the development and deployment of software tools for data management support systems/biomedical data repository. Our work supports BMRC-wide research programmes and industry collaborations.

Successful candidates will work with a team of data scientists, data engineers and UI designers to program a web-application stack for automated data integrity checks, data curation, data annotation, and data imputation for structured data generated by research programmes. Successful candidates will have the opportunity to tap into a large pool of biomedical data from different disciplines and to interact with the companies/researchers to understand their real data needs.

JOB REQUIREMENT

· Minimum bachelor’s degree or diploma in the field of computer science, computer engineering, or other web programming intensive course. With expertise in at least one of the following areas: creating, maintaining, implementing APIs, front-end development, microservices architecture

· Possess minimum 2 - 3 years or more of relevant work experience.

· Ability to work independently to translate design templates and ideas into programs with efficient coding.

· Basic knowledge in data analytics and proficient in Python, Node.js, React, SQL

· Prior industry experience with engineering, financial services, healthcare is a plus.

· Able to deliver under tight schedule.

· Good team player with understanding of best practices and cybersecurity.

· Good interpersonal and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

We are looking for highly-motivated and skilled programmers to join us in Biomed DAR (BII A*Star), to work on a new initiative in the development and deployment of software tools for data management support systems/biomedical data repository. Our work supports BMRC-wide research programmes and industry collaborations.

Successful candidates will work with a team of data scientists, data engineers and UI designers to program a web-application stack for automated data integrity checks, data curation, data annotation, and data imputation for structured data generated by research programmes. Successful candidates will have the opportunity to tap into a large pool of biomedical data from different disciplines and to interact with the companies/researchers to understand their real data needs.

JOB REQUIREMENT

· Minimum bachelor’s degree or diploma in the field of computer science, computer engineering, or other web programming intensive course. With expertise in at least one of the following areas: creating, maintaining, implementing APIs, front-end development, microservices architecture

· Possess minimum 5 years or more of relevant work experience.

· Ability to work independently to translate design templates and ideas into programs with efficient coding.

· Basic knowledge in data analytics and proficient in Python, Node.js, React, SQL

· Prior industry experience with engineering, financial services, healthcare is a plus.

· Able to deliver under tight schedule.

· Good team player with understanding of best practices and cybersecurity.

· Good interpersonal and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry-partnered Ignition research project where you will be part of a collaborative team exploring innovative ways of characterizing the physical and rheological properties of liquid personal care products and understanding the impact of these properties in product design and process development.

Key Responsibilities

• In this role, you will perform shear and extensional rheological characterization of a large variety of liquid personal care products including lotions, topical oils, and more. We will explore innovative and emerging methods of rheological characterization and analyzing rheological data to extract material parameters to build a database of materials. Working with our industrial partner we will establish an understanding of rheological properties that are useful for product formulation and process design related to lab and larger scale extrusion/dispensing applications.More specific responsibilities include:
  • Participate in and manage the research project with Principal Investigator (PI), and the research team members to ensure all project deliverables are met.
  • Undertake development of rheological protocols and characterization of liquid personal care products
  • Formulate model materials with various additives to understand their impact on product rheology
  • Design, execute, and interpret experiments independently and with support from the PI.
  • Prepare and deliver written articles, reports, and presentations for industrial partners and external audiences.
  • Attend and present at regular group meetings to receive feedback on work done and future plans
  • Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
  • Coordinate procurement and liaison with vendors/suppliers.
  • Work independently, as well as within a team.

Job Requirements

• Have relevant competence in the areas of rheological characterization and analysis, wet lab work, material formulation
• Have a degree in pharmaceutical engineering, chemical engineering, mechanical engineering, food or materials science/engineering, or a related field. Possessing a Master’s degree will be advantageous.
• Knowledge of any of the following will be advantageous: material dispensing/extrusion processing, material science, textural and sensory analysis

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development.
• Proficient in communicating via technical writing and presentations.
• Possess strong analytical and critical thinking skills.
• Show strong initiative and take ownership of work.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

About Sgcarmart

Sgcarmart is an established automotive media company in Singapore. Our site reaches 2.6M visitors monthly, making it the top-ranked local automotive website. We are on the lookout for talented individuals to join our growing team!

The Video Production Intern Role:

Are you a student pursuing a Diploma or Degree in Media Production or Digital Film? Sgcarmart is looking for a Video Production Intern to support the Stories & Branded Content team (SBC) in producing car review videos and car-related content for Singapore’s largest automotive on YouTube, with more than 400,000 views a month!

During this internship, you will have hands-on opportunities to learn and put into practice essential video production skills such as ideation, storytelling, pre-production, filming, editing, publishing, and using data analytics to track and improve performance. You will have exclusive access to the latest cars launched in Singapore, build a diverse and exciting video production portfolio, and expand your professional network in the automotive industry. You will also be given autonomy to film and edit engaging car-related content for Sgcarmart’s Tik Tok channel.

If you are passionate about filmmaking, have a strong interest in cars, and would like to be part of the 100-strong Sgcarmart team, look no further! Be part of this exciting team as the local automotive industry shifts up a gear to go green and push for electric vehicle adoption!

Requirements:

· Current Diploma or Degree student in Videography / Media Production / Film Production or relevant disciplines

· Proficiency in Adobe Premiere Pro

· Basic knowledge of Adobe Photoshop

· Basic knowledge of photography and videography terms like shutter speed, aperture, ISO, frame rate, audio levels

· Basic knowledge in operating Sony Alpha cameras for filming

· Be comfortable with shooting outdoors, reviewing and adjusting composition settings on the go (It sounds like a lot of hard work but we guarantee it will be twice the fun!)

Optional but advantageous skills and traits:

· A good sense of humor!

· Up to date with social media trends and current affairs news

· Basic understanding of audio mixing

· Some experience with using a gimbal stabiliser

· Eye for scene lighting and design

Internship Start Date:

· Immediate

Internship Duration:

· 6 Months preferred

Internship Allowance:

· $800 - $1,000

Work Location:

151 Lor Chuan, Lobby D, #04-04, New Tech Park S(556741)

Working Hours:

Mon to Fri, 10am to 7pm

Fabrica AI Full time Electrical Engineer - Invention of Automatic Tile Grouting Robots

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your role would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. The following tracks are available:

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. If you like this process, you’d be a good fit for us.

Check out the link above for more information, and send your CV to [email protected]

Product area

Whether it is paying online with Autofill, using tap and pay in stores, or using the Google Pay app, the Payments team at Google is focused on making payments simple, seamless, and secure. In addition to consumer payment technologies, the Payments team also powers the money movement between Google and its consumers and businesses.

Job description

Google's software engineers develop the next-generation technologies that change how billions of users connect, explore, and interact with information and one another. Our products need to handle information at massive scale, and extend well beyond web search. We're looking for engineers who bring fresh ideas from all areas, including information retrieval, distributed computing, large-scale system design, networking and data storage, security, artificial intelligence, natural language processing, UI design and mobile; the list goes on and is growing every day. As a software engineer, you will work on a specific project critical to Google’s needs with opportunities to switch teams and projects as you and our fast-paced business grow and evolve. We need our engineers to be versatile, display leadership qualities and be enthusiastic to take on new problems across the full-stack as we continue to push technology forward.

Qualifications

Job responsibilities

• Build out data infrastructure and data pipelines in a secure and privacy compliant manner.
• Work with feature teams to provide reliable data and infrastructure.
• Maintain existing data infrastructure and ensure critical data is available and reliable.

Minimum qualifications

• Bachelor's degree or equivalent practical experience.
• 1 year of experience with software development in one or more programming languages (e.g., Java, C++).

Preferred qualifications

• Experience working with large data and creating and making available data cubes for other teams.
• Experience in optimizing data processing pipelines and data serving.
• Experience with data analysis and visualization tools (e.g., SQL, Colab).

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Coastal Protection and Flood Resilience Institute (CFI) Singapore is actively seeking a Research Engineer to contribute to a groundbreaking research project. This research explores the efficacy of integrated nature-based solutions in sediment erosional control and coastal protection. The goal is to develop innovative, physically based models that quantify the protective benefits a vegetation meadow can offer to shorelines.

The Research Engineer will participate in experimental research, with a specific focus on studying sediment flux in hybrid solutions to coastal protection. He/she will lead and execute flume experiments, data analysis and field sampling as well as specific tasks which includes planning and conducting experiments, running laboratory analyses, collection and analysis of data, and performing basic administrative duties.

He/she will work need to work with Assistant Professor Gary Lei from Civil and Environmental Engineering and Dr. Ow Yan Xiang from the Tropical Marine Science Institute (TMSI) at NUS. Ideally, we are interested in candidates with prior experience with laboratory experiments.

Job Requirements

• Possess a bachelor’s degree in environmental engineering /Environmental Science/ Mechanical Engineering, or a closely-related field.
• Priority will be given to applicants who have prior research experience in coastal engineering, aquatic plants science, eco-hydraulics, and/or environmental fluid mechanics.
• Strong verbal and written communication skills.
• Proficient with Microsoft Suite and R, or other equivalent analytic software.
• Open to fixed-term contract.

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

• Position : Service Engineer - Up to $5,000 - Changi Business Park
• Location : Changi Business Park
• Working hours : 5 Days Work Week – Monday to Friday: 9.00 AM to 5.30 PM
• Salary (commensurate with experience) : Up to $5,000 + Transport Allowance + AWS + Performance Bonus + 14 Days Annual Leave + Medical and Dental benefits + Insurance
• Duration : Permanent
• Industry : Semi-Conductor Industry

Responsibilities:

• Prepare service and spare parts quotations to customers enquiries
• Performing service tasks like in-house repair and on-site commissioning for various gas and water quality analyzers, CEMS and AQMS.
• Troubleshooting analyzer & advising customers on the best solutions in accordance with standard procedures and safety guidelines of Company
• Creating and maintaining strong relationships with customers and providing good services support.
• Liaise and work with customers to address any service concerns and provide solution on the technical problems
• Support project team to perform Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) for project
• Identifying potential opportunities to get new preventive & maintenance contract
• Provide product training to end user and distributor
• Any other ad-hoc duties assigned

Requirements:

• Degree in Engineering (Mechanical, Environmental, Science, Electronics/Electrical Engineering or equivalent qualification)
• Must have knowledge on gas analyzers, CEMS and water quality analyzer
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only
• Preferably possess own transport

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

Remuneration: Basic + VB

Work location: Alexandra

Job Description:

Report to the Project Director / Manager in Charged of the WTW system.

• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built
• documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Job Requirements:

• Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Specific experience in WTW system (Offshore Passenger Transfer System) is highly advantageous
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Strong leadership with problem-solving skills. Strong understanding in structural design is highly advantageous
• Ability to speak both English and Mandarin to liaise with Mandarin speaking clients
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software is highly advantageous
• Good understanding of Document Control. Knowledge of ISO9001:2015 QAM system is highly advantageous
• The candidate must be willing to travel and work in marine and offshore environment.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Summary:

• Basic up to 4.5k
• Performance bonus
• 5 days work week, 8-5pm
• Location: Pioneer
• MNC company
• Career Advancement
• Proficiency in CNC machines

Key Responsibilities:

• To repair & service CNC machines in the region
• To implement service programmes for customer service
• Machine Installation
• Documentation (Service report, Machine registration, filing and record)
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electrical / Mechanical / Mechatronics Engineering
• Min 2 years of relevant experience in servicing CNC turning / milling machines
• Possess class 3 driving license

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Summary:

• Basic up to 6k
• Performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845